| 1 |
unnilennium |
1.1 |
# $Id: rockwell,v 1.2 1996/06/24 02:58:40 sam Rel $ |
| 2 |
|
|
# |
| 3 |
|
|
# HylaFAX Facsimile Software |
| 4 |
|
|
# |
| 5 |
|
|
# Copyright (c) 1990-1996 Sam Leffler |
| 6 |
|
|
# Copyright (c) 1991-1996 Silicon Graphics, Inc. |
| 7 |
|
|
# HylaFAX is a trademark of Silicon Graphics, Inc. |
| 8 |
|
|
# |
| 9 |
|
|
# Permission to use, copy, modify, distribute, and sell this software and |
| 10 |
|
|
# its documentation for any purpose is hereby granted without fee, provided |
| 11 |
|
|
# that (i) the above copyright notices and this permission notice appear in |
| 12 |
|
|
# all copies of the software and related documentation, and (ii) the names of |
| 13 |
|
|
# Sam Leffler and Silicon Graphics may not be used in any advertising or |
| 14 |
|
|
# publicity relating to the software without the specific, prior written |
| 15 |
|
|
# permission of Sam Leffler and Silicon Graphics. |
| 16 |
|
|
# |
| 17 |
|
|
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, |
| 18 |
|
|
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY |
| 19 |
|
|
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. |
| 20 |
|
|
# |
| 21 |
|
|
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR |
| 22 |
|
|
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, |
| 23 |
|
|
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, |
| 24 |
|
|
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF |
| 25 |
|
|
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE |
| 26 |
|
|
# OF THIS SOFTWARE. |
| 27 |
|
|
# |
| 28 |
|
|
|
| 29 |
|
|
# |
| 30 |
|
|
# Configuration for a Rockwell-based modem not otherwise handled by |
| 31 |
|
|
# another prototype configuration file. This file assumes the modem |
| 32 |
|
|
# is compatible with the Rc144AC, RC96AC or RC144DP. |
| 33 |
|
|
# |
| 34 |
|
|
# This configuration file sets up the modem to run at 38.4 with |
| 35 |
|
|
# RTS/CTS flow control used by default. XON/XOFF is automatically |
| 36 |
|
|
# enabled for fax recv. Beware of modems that also lock sending |
| 37 |
|
|
# to 19.2; add ModemSendBeginCmd: "<19200>" if this is required. |
| 38 |
|
|
# Also beware that the adaptive-answer facility, when supported, |
| 39 |
|
|
# is often unreliable. |
| 40 |
|
|
# |
| 41 |
|
|
# |
| 42 |
|
|
CountryCode: 1 |
| 43 |
|
|
AreaCode: 999 |
| 44 |
|
|
FAXNumber: +1.999.555.1212 |
| 45 |
|
|
LongDistancePrefix: 1 |
| 46 |
|
|
InternationalPrefix: 011 |
| 47 |
|
|
DialStringRules: "etc/dialrules.sf-ba" |
| 48 |
|
|
ServerTracing: 1 |
| 49 |
|
|
SessionTracing: 11 |
| 50 |
|
|
RecvFileMode: 0600 |
| 51 |
|
|
LogFileMode: 0600 |
| 52 |
|
|
DeviceMode: 0600 |
| 53 |
|
|
RingsBeforeAnswer: 1 |
| 54 |
|
|
SpeakerVolume: off |
| 55 |
|
|
GettyArgs: "-h %l %s" |
| 56 |
|
|
LocalIdentifier: "Silent Valley Sys" |
| 57 |
|
|
TagLineFont: etc/lutRS18.pcf |
| 58 |
|
|
TagLineFormat: "From %%l|%c|Page %%p of %%t" |
| 59 |
|
|
MaxRecvPages: 25 |
| 60 |
|
|
# |
| 61 |
|
|
# |
| 62 |
|
|
# Modem-related stuff: should reflect modem command interface |
| 63 |
|
|
# and hardware connection/cabling (e.g. flow control). |
| 64 |
|
|
# |
| 65 |
|
|
ModemType: Class2 # use class 2 interface |
| 66 |
|
|
ModemRate: 38400 |
| 67 |
|
|
ModemFlowControl: rtscts # default |
| 68 |
|
|
# |
| 69 |
|
|
ModemResetCmds: AT&F # what you want for a Supra |
| 70 |
|
|
ModemNoFlowCmd: AT&K0 # disable flow control cmd |
| 71 |
|
|
ModemHardFlowCmd: AT&K3 # hardware flow control cmd |
| 72 |
|
|
ModemSoftFlowCmd: AT&K4 # software flow control cmd |
| 73 |
|
|
ModemSetupDTRCmd: AT&D3 # DTR off causes modem to reset |
| 74 |
|
|
#ModemSetupDTRCmd: AT&D2S25=1S38=0 # Dynalink 1414VE needs this |
| 75 |
|
|
ModemSetupDCDCmd: AT&C1 # DCD follows carrier |
| 76 |
|
|
ModemSetupAACmd: AT+FAA=1+FCLASS=0 # enable in current class |
| 77 |
|
|
# |
| 78 |
|
|
ModemSendFillOrder: LSB2MSB # as expected |
| 79 |
|
|
ModemRecvFillOrder: MSB2LSB # opposite of what makes sense |
| 80 |
|
|
# |
| 81 |
|
|
ModemAnswerFaxBeginCmd: "<19200><rts>" # modem switches on fax receive |
| 82 |
|
|
# |
| 83 |
|
|
# Caller ID configuration setup for Supra. |
| 84 |
|
|
# |
| 85 |
|
|
#QualifyCID: etc/cid # CID access control list file |
| 86 |
|
|
#CIDNumber: "NMBR = " # pattern string for phone number info |
| 87 |
|
|
#CIDName: "NAME = " # pattern string for identity info |
| 88 |
|
|
Class2RecvDataTrigger: "\022" # character sent to modem to start recv |
| 89 |
|
|
|
| 90 |
|
|
|
| 91 |
|
|
|
| 92 |
|
|
|
| 93 |
|
|
|
| 94 |
|
|
|
| 95 |
|
|
|
| 96 |
|
|
|
Parent Directory
| 
Revision Log
| 
Revision Graph
