mailman/contribs10/mailman-2.1.12-lctype.patch

diff -ruN mailman-2.1.12-a/bin/add_members mailman-2.1.12-b/bin/add_members
--- mailman-2.1.12-a/bin/add_members    2009-02-23 22:23:35.000000000 +0100
+++ mailman-2.1.12-b/bin/add_members    2009-07-28 12:19:54.000000000 +0200
@@ -80,7 +80,7 @@
 from Mailman import mm_cfg
 from Mailman import i18n
 
-_ = i18n._
+C_ = i18n.C_
 
 
 
@@ -89,7 +89,7 @@
         fd = sys.stderr
     else:
         fd = sys.stdout
-    print >> fd, _(__doc__)
+    print >> fd, C_(__doc__)
     if msg:
         print >> fd, msg
     sys.exit(status)
@@ -134,19 +134,19 @@
         try:
             mlist.ApprovedAddMember(userdesc, ack, 0)
         except Errors.MMAlreadyAMember:
-            print >> tee, _('Already a member: %(member)s')
+            print >> tee, C_('Already a member: %(member)s')
         except Errors.MembershipIsBanned, pattern:
             print >> tee, ('%s:' %
-                           member), _('Banned address (matched %(pattern)s)')
+                           member), C_('Banned address (matched %(pattern)s)')
         except Errors.MMBadEmailError:
             if userdesc.address == '':
-                print >> tee, _('Bad/Invalid email address: blank line')
+                print >> tee, C_('Bad/Invalid email address: blank line')
             else:
-                print >> tee, _('Bad/Invalid email address: %(member)s')
+                print >> tee, C_('Bad/Invalid email address: %(member)s')
         except Errors.MMHostileAddress:
-            print >> tee, _('Hostile address (illegal characters): %(member)s')
+            print >> tee, C_('Hostile address (illegal characters): %(member)s')
         else:
-            print >> tee, _('Subscribed: %(member)s')
+            print >> tee, C_('Subscribed: %(member)s')
 
 
 
@@ -191,26 +191,26 @@
             elif arg.lower()[0] == 'n':
                 send_welcome_msg = 0
             else:
-                usage(1, _('Bad argument to -w/--welcome-msg: %(arg)s'))
+                usage(1, C_('Bad argument to -w/--welcome-msg: %(arg)s'))
         elif opt in ('-a', '--admin-notify'):
             if arg.lower()[0] == 'y':
                 admin_notif = 1
             elif arg.lower()[0] == 'n':
                 admin_notif = 0
             else:
-                usage(1, _('Bad argument to -a/--admin-notify: %(arg)s'))
+                usage(1, C_('Bad argument to -a/--admin-notify: %(arg)s'))
 
     if dfile is None and nfile is None:
         usage(1)
 
     if dfile == "-" and nfile == "-":
-        usage(1, _('Cannot read both digest and normal members '
+        usage(1, C_('Cannot read both digest and normal members '
                    'from standard input.'))
 
     try:
         mlist = MailList.MailList(listname)
     except Errors.MMUnknownListError:
-        usage(1, _('No such list: %(listname)s'))
+        usage(1, C_('No such list: %(listname)s'))
 
     # Set up defaults
     if send_welcome_msg is None:
@@ -230,7 +230,7 @@
             nmembers = readfile(nfile)
 
         if not dmembers and not nmembers:
-            usage(0, _('Nothing to do.'))
+            usage(0, C_('Nothing to do.'))
 
         s = StringIO()
         i18n.set_language(mlist.preferred_language)
@@ -242,7 +242,7 @@
 
         if admin_notif:
             realname = mlist.real_name
-            subject = _('%(realname)s subscription notification')
+            subject = C_('%(realname)s subscription notification')
             msg = Message.UserNotification(
                 mlist.owner, Utils.get_site_email(), subject, s.getvalue(),
                 mlist.preferred_language)
diff -ruN mailman-2.1.12-a/bin/arch mailman-2.1.12-b/bin/arch
--- mailman-2.1.12-a/bin/arch   2009-02-23 22:23:35.000000000 +0100
+++ mailman-2.1.12-b/bin/arch   2009-07-28 12:19:54.000000000 +0200
@@ -70,7 +70,7 @@
 from Mailman.LockFile import LockFile
 from Mailman import i18n
 
-_ = i18n._
+C_ = i18n.C_
 
 PROGRAM = sys.argv[0]
 i18n.set_language(mm_cfg.DEFAULT_SERVER_LANGUAGE)
@@ -82,7 +82,7 @@
         fd = sys.stderr
     else:
         fd = sys.stdout
-    print >> fd, _(__doc__)
+    print >> fd, C_(__doc__)
     if msg:
         print >> fd, msg
     sys.exit(code)
@@ -122,7 +122,7 @@
 
     # grok arguments
     if len(args) < 1:
-        usage(1, _('listname is required'))
+        usage(1, C_('listname is required'))
     listname = args[0].lower().strip()
 
     if len(args) < 2:
@@ -140,7 +140,7 @@
         try:
             mlist = MailList(listname)
         except Errors.MMListError, e:
-            usage(2, _('No such list "%(listname)s"\n%(e)s'))
+            usage(2, C_('No such list "%(listname)s"\n%(e)s'))
         if mbox is None:
             mbox = mlist.ArchiveFileName()
 
@@ -165,7 +165,7 @@
         try:
             fp = open(mbox)
         except IOError, msg:
-            usage(3, _('Cannot open mbox file %(mbox)s: %(msg)s'))
+            usage(3, C_('Cannot open mbox file %(mbox)s: %(msg)s'))
         # Maybe wipe the old archives
         if wipe:
             if mlist.scrub_nondigest:
diff -ruN mailman-2.1.12-a/bin/b4b5-archfix mailman-2.1.12-b/bin/b4b5-archfix
--- mailman-2.1.12-a/bin/b4b5-archfix   2009-02-23 22:23:35.000000000 +0100
+++ mailman-2.1.12-b/bin/b4b5-archfix   2009-07-28 12:19:54.000000000 +0200
@@ -44,7 +44,7 @@
 
 # Required to get the right classes for unpickling
 import paths
-from Mailman.i18n import _
+from Mailman.i18n import C_
 
 PROGRAM = sys.argv[0]
 
@@ -55,7 +55,7 @@
         fd = sys.stderr
     else:
         fd = sys.stdout
-    print >> fd, _(__doc__)
+    print >> fd, C_(__doc__)
     if msg:
         print >> fd, msg
     sys.exit(code)
diff -ruN mailman-2.1.12-a/bin/change_pw mailman-2.1.12-b/bin/change_pw
--- mailman-2.1.12-a/bin/change_pw      2009-07-28 12:19:50.000000000 +0200
+++ mailman-2.1.12-b/bin/change_pw      2009-07-28 12:19:54.000000000 +0200
@@ -76,7 +76,7 @@
 from Mailman import Message
 from Mailman import i18n
 
-_ = i18n._
+C_ = i18n.C_
 
 SPACE = ' '
 
@@ -87,7 +87,7 @@
         fd = sys.stderr
     else:
         fd = sys.stdout
-    print >> fd, _(__doc__)
+    print >> fd, C_(__doc__)
     if msg:
         print >> fd, msg
     sys.exit(code)
@@ -103,7 +103,7 @@
         try:
             mlist = MailList.MailList(listname, lock=0)
         except Errors.MMListError, e:
-            usage(1, _('No such list "%(listname)s"\n%(e)s'))
+            usage(1, C_('No such list "%(listname)s"\n%(e)s'))
         _listcache[listname] = mlist
     return mlist
 
@@ -141,11 +141,11 @@
 
     if args:
         strargs = SPACE.join(args)
-        usage(1, _('Bad arguments: %(strargs)s'))
+        usage(1, C_('Bad arguments: %(strargs)s'))
 
     if password is not None:
         if not password:
-            usage(1, _('Empty list passwords are not allowed'))
+            usage(1, C_('Empty list passwords are not allowed'))
         shapassword = Utils.sha_new(password).hexdigest()
 
     if domains:
@@ -155,7 +155,7 @@
                 listnames[name] = 1
 
     if not listnames:
-        print >> sys.stderr, _('Nothing to do.')
+        print >> sys.stderr, C_('Nothing to do.')
         sys.exit(0)
 
     # Set the password on the lists
@@ -177,7 +177,7 @@
             mlist.Unlock()
 
         # Notification
-        print _('New %(listname)s password: %(notifypassword)s')
+        print C_('New %(listname)s password: %(notifypassword)s')
         if not quiet:
             otrans = i18n.get_translation()
             i18n.set_language(mlist.preferred_language)
diff -ruN mailman-2.1.12-a/bin/check_db mailman-2.1.12-b/bin/check_db
--- mailman-2.1.12-a/bin/check_db       2009-02-23 22:23:35.000000000 +0100
+++ mailman-2.1.12-b/bin/check_db       2009-07-28 12:19:54.000000000 +0200
@@ -59,7 +59,7 @@
 from Mailman import mm_cfg
 from Mailman import Utils
 from Mailman.MailList import MailList
-from Mailman.i18n import _
+from Mailman.i18n import C_
 
 PROGRAM = sys.argv[0]
 
@@ -70,7 +70,7 @@
         fd = sys.stderr
     else:
         fd = sys.stdout
-    print >> fd, _(__doc__)
+    print >> fd, C_(__doc__)
     if msg:
         print >> fd, msg
     sys.exit(code)
@@ -111,12 +111,12 @@
 
     listnames = [n.lower().strip() for n in listnames]
     if not listnames:
-        print _('Nothing to do.')
+        print C_('Nothing to do.')
         sys.exit(0)
 
     for listname in listnames:
         if not Utils.list_exists(listname):
-            print _('No list named:'), listname
+            print C_('No list named:'), listname
             continue
         mlist = MailList(listname, lock=0)
         pfile = os.path.join(mlist.fullpath(), 'config.pck')
@@ -125,7 +125,7 @@
         dlast = dfile + '.last'
 
         if verbose:
-            print _('List:'), listname
+            print C_('List:'), listname
 
         for file in (pfile, plast, dfile, dlast):
             status = 0
@@ -145,7 +145,7 @@
                 else:
                     print '    %s: %s' % (file, status)
             elif verbose:
-                print _('   %(file)s: okay')
+                print C_('   %(file)s: okay')
 
 
 
diff -ruN mailman-2.1.12-a/bin/check_perms mailman-2.1.12-b/bin/check_perms
--- mailman-2.1.12-a/bin/check_perms    2009-07-28 12:19:50.000000000 +0200
+++ mailman-2.1.12-b/bin/check_perms    2009-07-28 12:19:54.000000000 +0200
@@ -45,7 +45,7 @@
     raise
 from Mailman import mm_cfg
 from Mailman.mm_cfg import MAILMAN_USER, MAILMAN_GROUP
-from Mailman.i18n import _
+from Mailman.i18n import C_
 
 # Let KeyErrors percolate
 MAILMAN_GID = grp.getgrnam(MAILMAN_GROUP)[2]
@@ -107,7 +107,7 @@
     for name in names:
         path = os.path.join(dirname, name)
         if arg.VERBOSE:
-            print _('    checking gid and mode for %(path)s')
+            print C_('    checking gid and mode for %(path)s')
         try:
             mode, gid = statgidmode(path)
         except OSError, e:
@@ -119,10 +119,10 @@
             except KeyError:
                 groupname = '<anon gid %d>' % gid
             arg.ERRORS += 1
-            print _('%(path)s bad group (has: %(groupname)s, '
+            print C_('%(path)s bad group (has: %(groupname)s, '
                     'expected %(MAILMAN_GROUP)s)'),
             if STATE.FIX:
-                print _('(fixing)')
+                print C_('(fixing)')
                 os.chown(path, -1, MAILMAN_GID)
             else:
                 print
@@ -148,19 +148,19 @@
         octperms = oct(targetperms)
         if S_ISDIR(mode) and (mode & targetperms) <> targetperms:
             arg.ERRORS += 1
-            print _('directory permissions must be %(octperms)s: %(path)s'),
+            print C_('directory permissions must be %(octperms)s: %(path)s'),
             if STATE.FIX:
-                print _('(fixing)')
+                print C_('(fixing)')
                 os.chmod(path, mode | targetperms)
             else:
                 print
         elif os.path.splitext(path)[1] in ('.py', '.pyc', '.pyo'):
             octperms = oct(PYFILEPERMS)
             if mode & PYFILEPERMS <> PYFILEPERMS:
-                print _('source perms must be %(octperms)s: %(path)s'),
+                print C_('source perms must be %(octperms)s: %(path)s'),
                 arg.ERRORS += 1
                 if STATE.FIX:
-                    print _('(fixing)')
+                    print C_('(fixing)')
                     os.chmod(path, mode | PYFILEPERMS)
                 else:
                     print
@@ -168,10 +168,10 @@
             # Article files must be group writeable
             octperms = oct(ARTICLEFILEPERMS)
             if mode & ARTICLEFILEPERMS <> ARTICLEFILEPERMS:
-                print _('article db files must be %(octperms)s: %(path)s'),
+                print C_('article db files must be %(octperms)s: %(path)s'),
                 arg.ERRORS += 1
                 if STATE.FIX:
-                    print _('(fixing)')
+                    print C_('(fixing)')
                     os.chmod(path, mode | ARTICLEFILEPERMS)
                 else:
                     print
@@ -180,7 +180,7 @@
     # first check PREFIX
     if STATE.VERBOSE:
         prefix = mm_cfg.PREFIX
-        print _('checking mode for %(prefix)s')
+        print C_('checking mode for %(prefix)s')
     dirs = {}
     for d in (mm_cfg.PREFIX, mm_cfg.EXEC_PREFIX, mm_cfg.VAR_PREFIX,
               mm_cfg.CONFIG_DIR, mm_cfg.DATA_DIR, mm_cfg.LOCK_DIR,
@@ -191,13 +191,13 @@
             mode = statmode(d)
         except OSError, e:
             if e.errno <> errno.ENOENT: raise
-            print _('WARNING: directory does not exist: %(d)s')
+            print C_('WARNING: directory does not exist: %(d)s')
             continue
         if (mode & DIRPERMS) <> DIRPERMS:
             STATE.ERRORS += 1
-            print _('directory must be at least 02775: %(d)s'),
+            print C_('directory must be at least 02775: %(d)s'),
             if STATE.FIX:
-                print _('(fixing)')
+                print C_('(fixing)')
                 os.chmod(d, mode | DIRPERMS)
             else:
                 print
@@ -207,14 +207,14 @@
 def checkarchives():
     private = mm_cfg.PRIVATE_ARCHIVE_FILE_DIR
     if STATE.VERBOSE:
-        print _('checking perms on %(private)s')
+        print C_('checking perms on %(private)s')
     # private archives must not be other readable
     mode = statmode(private)
     if mode & S_IROTH:
         STATE.ERRORS += 1
-        print _('%(private)s must not be other-readable'),
+        print C_('%(private)s must not be other-readable'),
         if STATE.FIX:
-            print _('(fixing)')
+            print C_('(fixing)')
             os.chmod(private, mode & ~S_IROTH)
         else:
             print
@@ -238,9 +238,9 @@
         mode = statmode(mboxfile)
         if (mode & MBOXPERMS) <> MBOXPERMS:
             STATE.ERRORS = STATE.ERRORS + 1
-            print _('mbox file must be at least 0660:'), mboxfile
+            print C_('mbox file must be at least 0660:'), mboxfile
             if STATE.FIX:
-                print _('(fixing)')
+                print C_('(fixing)')
                 os.chmod(mboxfile, mode | MBOXPERMS)
             else:
                 print
@@ -261,9 +261,9 @@
             continue
         if mode & S_IRWXO:
             STATE.ERRORS += 1
-            print _('%(dbdir)s "other" perms must be 000'),
+            print C_('%(dbdir)s "other" perms must be 000'),
             if STATE.FIX:
-                print _('(fixing)')
+                print C_('(fixing)')
                 os.chmod(dbdir, mode & ~S_IRWXO)
             else:
                 print
@@ -271,18 +271,18 @@
 def checkcgi():
     cgidir = os.path.join(mm_cfg.EXEC_PREFIX, 'cgi-bin')
     if STATE.VERBOSE:
-        print _('checking cgi-bin permissions')
+        print C_('checking cgi-bin permissions')
     exes = os.listdir(cgidir)
     for f in exes:
         path = os.path.join(cgidir, f)
         if STATE.VERBOSE:
-            print _('    checking set-gid for %(path)s')
+            print C_('    checking set-gid for %(path)s')
         mode = statmode(path)
         if mode & S_IXGRP and not mode & S_ISGID:
             STATE.ERRORS += 1
-            print _('%(path)s must be set-gid'),
+            print C_('%(path)s must be set-gid'),
             if STATE.FIX:
-                print _('(fixing)')
+                print C_('(fixing)')
                 os.chmod(path, mode | S_ISGID)
             else:
                 print
@@ -290,13 +290,13 @@
 def checkmail():
     wrapper = os.path.join(mm_cfg.WRAPPER_DIR, 'mailman')
     if STATE.VERBOSE:
-        print _('checking set-gid for %(wrapper)s')
+        print C_('checking set-gid for %(wrapper)s')
     mode = statmode(wrapper)
     if not mode & S_ISGID:
         STATE.ERRORS += 1
-        print _('%(wrapper)s must be set-gid'),
+        print C_('%(wrapper)s must be set-gid'),
         if STATE.FIX:
-            print _('(fixing)')
+            print C_('(fixing)')
             os.chmod(wrapper, mode | S_ISGID)
 
 def checkadminpw():
@@ -304,7 +304,7 @@
                    os.path.join(mm_cfg.DATA_DIR, 'creator.pw')):
         targetmode = S_IFREG | S_IRUSR | S_IWUSR | S_IRGRP
         if STATE.VERBOSE:
-            print _('checking permissions on %(pwfile)s')
+            print C_('checking permissions on %(pwfile)s')
         try:
             mode = statmode(pwfile)
         except OSError, e:
@@ -313,10 +313,10 @@
         if mode <> targetmode:
             STATE.ERRORS += 1
             octmode = oct(mode)
-            print _('%(pwfile)s permissions must be exactly 0640 '
+            print C_('%(pwfile)s permissions must be exactly 0640 '
                     '(got %(octmode)s)'),
             if STATE.FIX:
-                print _('(fixing)')
+                print C_('(fixing)')
                 os.chmod(pwfile, targetmode)
             else:
                 print
@@ -338,13 +338,13 @@
                   'digest.mbox', 'pending.pck',
                   'request.db', 'request.db.tmp')
     if STATE.VERBOSE:
-        print _('checking permissions on list data')
+        print C_('checking permissions on list data')
     # BAW: This needs to be converted to the Site module abstraction
     for dir in os.listdir(mm_cfg.LIST_DATA_DIR):
         for file in checkfiles:
             path = os.path.join(mm_cfg.LIST_DATA_DIR, dir, file)
             if STATE.VERBOSE:
-                print _('    checking permissions on: %(path)s')
+                print C_('    checking permissions on: %(path)s')
             try:
                 mode = statmode(path)
             except OSError, e:
@@ -352,9 +352,9 @@
                 continue
             if (mode & targetmode) <> targetmode:
                 STATE.ERRORS += 1
-                print _('file permissions must be at least 660: %(path)s'),
+                print C_('file permissions must be at least 660: %(path)s'),
                 if STATE.FIX:
-                    print _('(fixing)')
+                    print C_('(fixing)')
                     os.chmod(path, mode | targetmode)
                 else:
                     print
@@ -366,7 +366,7 @@
         fd = sys.stderr
     else:
         fd = sys.stdout
-    print >> fd, _(__doc__)
+    print >> fd, C_(__doc__)
     if msg:
         print >> fd, msg
     sys.exit(code)
@@ -397,7 +397,7 @@
     checkmta()
 
     if not STATE.ERRORS:
-        print _('No problems found')
+        print C_('No problems found')
     else:
-        print _('Problems found:'), STATE.ERRORS
-        print _('Re-run as %(MAILMAN_USER)s (or root) with -f flag to fix')
+        print C_('Problems found:'), STATE.ERRORS
+        print C_('Re-run as %(MAILMAN_USER)s (or root) with -f flag to fix')
diff -ruN mailman-2.1.12-a/bin/cleanarch mailman-2.1.12-b/bin/cleanarch
--- mailman-2.1.12-a/bin/cleanarch      2009-02-23 22:23:35.000000000 +0100
+++ mailman-2.1.12-b/bin/cleanarch      2009-07-28 12:19:54.000000000 +0200
@@ -53,7 +53,7 @@
 import mailbox
 
 import paths
-from Mailman.i18n import _
+from Mailman.i18n import C_
 
 cre = re.compile(mailbox.UnixMailbox._fromlinepattern)
 
@@ -69,7 +69,7 @@
         fd = sys.stderr
     else:
         fd = sys.stdout
-    print >> fd, _(__doc__)
+    print >> fd, C_(__doc__)
     if msg:
         print >> fd, msg
     sys.exit(code)
@@ -80,7 +80,7 @@
     if output:
         sys.stdout.write('>' + line)
     if not quiet:
-        print >> sys.stderr, _('Unix-From line changed: %(lineno)d')
+        print >> sys.stderr, C_('Unix-From line changed: %(lineno)d')
         print >> sys.stderr, line[:-1]
 
 
@@ -108,7 +108,7 @@
             try:
                 status = int(arg)
             except ValueError:
-                usage(1, _('Bad status number: %(arg)s'))
+                usage(1, C_('Bad status number: %(arg)s'))
 
     if args:
         usage(1)
@@ -164,7 +164,7 @@
                 print >> sys.stderr
                 statuscnt = 0
         prevline = line
-    print >> sys.stderr, _('%(messages)d messages found')
+    print >> sys.stderr, C_('%(messages)d messages found')
 
 
 
diff -ruN mailman-2.1.12-a/bin/clone_member mailman-2.1.12-b/bin/clone_member
--- mailman-2.1.12-a/bin/clone_member   2009-02-23 22:23:35.000000000 +0100
+++ mailman-2.1.12-b/bin/clone_member   2009-07-28 12:19:54.000000000 +0200
@@ -72,7 +72,7 @@
 from Mailman import MailList
 from Mailman import Utils
 from Mailman import Errors
-from Mailman.i18n import _
+from Mailman.i18n import C_
 
 
 
@@ -81,7 +81,7 @@
         fd = sys.stderr
     else:
         fd = sys.stdout
-    print >> fd, _(__doc__)
+    print >> fd, C_(__doc__)
     if msg:
         print >> fd, msg
     sys.exit(code)
@@ -91,14 +91,14 @@
 def dolist(mlist, options):
     SPACE = ' '
     if not options.quiet:
-        print _('processing mailing list:'), mlist.internal_name()
+        print C_('processing mailing list:'), mlist.internal_name()
 
     # scan the list owners.  TBD: mlist.owner keys should be lowercase?
     oldowners = mlist.owner[:]
     oldowners.sort()
     if options.admintoo:
         if not options.quiet:
-            print _('    scanning list owners:'), SPACE.join(oldowners)
+            print C_('    scanning list owners:'), SPACE.join(oldowners)
         newowners = {}
         foundp = 0
         for owner in mlist.owner:
@@ -116,9 +116,9 @@
         if not options.quiet:
             if newowners <> oldowners:
                 print
-                print _('    new list owners:'), SPACE.join(newowners)
+                print C_('    new list owners:'), SPACE.join(newowners)
             else:
-                print _('(no change)')
+                print C_('(no change)')
 
     # see if the fromaddr is a digest member or regular member
     if options.lfromaddr in mlist.getDigestMemberKeys():
@@ -127,13 +127,13 @@
         digest = 0
     else:
         if not options.quiet:
-            print _('    address not found:'), options.fromaddr
+            print C_('    address not found:'), options.fromaddr
         return
     # Check for banned to address.
     pattern = mlist.GetBannedPattern(options.toaddr)
     if pattern:
         if not options.quiet:
-            print '   ', _('Banned address (matched %(pattern)s)')
+            print '   ', C_('Banned address (matched %(pattern)s)')
         return
 
     # Now change the membership address
@@ -142,13 +142,13 @@
             mlist.changeMemberAddress(options.fromaddr, options.toaddr,
                                       not options.remove)
         if not options.quiet:
-            print _('    clone address added:'), options.toaddr
+            print C_('    clone address added:'), options.toaddr
     except Errors.MMAlreadyAMember:
         if not options.quiet:
-            print _('    clone address is already a member:'), options.toaddr
+            print C_('    clone address is already a member:'), options.toaddr
 
     if options.remove:
-        print _('    original address removed:'), options.fromaddr
+        print C_('    original address removed:'), options.fromaddr
 
 
 
@@ -199,7 +199,7 @@
     try:
         Utils.ValidateEmail(toaddr)
     except Errors.EmailAddressError:
-        usage(1, _('Not a valid email address: %(toaddr)s'))
+        usage(1, C_('Not a valid email address: %(toaddr)s'))
     lfromaddr = fromaddr.lower()
     options.toaddr = toaddr
     options.fromaddr = fromaddr
@@ -212,7 +212,7 @@
         try:
             mlist = MailList.MailList(listname)
         except Errors.MMListError, e:
-            print _('Error opening list "%(listname)s", skipping.\n%(e)s')
+            print C_('Error opening list "%(listname)s", skipping.\n%(e)s')
             continue
         try:
             dolist(mlist, options)
diff -ruN mailman-2.1.12-a/bin/config_list mailman-2.1.12-b/bin/config_list
--- mailman-2.1.12-a/bin/config_list    2009-02-23 22:23:35.000000000 +0100
+++ mailman-2.1.12-b/bin/config_list    2009-07-28 12:19:54.000000000 +0200
@@ -75,7 +75,7 @@
 from Mailman import Errors
 from Mailman import i18n
 
-_ = i18n._
+C_ = i18n.C_
 
 NL = '\n'
 nonasciipat = re.compile(r'[\x80-\xff]')
@@ -87,7 +87,7 @@
         fd = sys.stderr
     else:
         fd = sys.stdout
-    print >> fd, _(__doc__)
+    print >> fd, C_(__doc__)
     if msg:
         print >> fd, msg
     sys.exit(code)
@@ -106,7 +106,7 @@
         try:
             mlist = MailList.MailList(listname, lock=0)
         except Errors.MMListError:
-            usage(1, _('No such list: %(listname)s'))
+            usage(1, C_('No such list: %(listname)s'))
         # Preamble for the config info. PEP263 charset and capture time.
         language = mlist.preferred_language
         charset = Utils.GetCharSet(language)
@@ -114,7 +114,7 @@
         if not charset:
             charset = 'us-ascii'
         when = time.ctime(time.time())
-        print >> outfp, _('''\
+        print >> outfp, C_('''\
 # -*- python -*-
 # -*- coding: %(charset)s -*-
 ## "%(listname)s" mailing list configuration settings
@@ -140,7 +140,7 @@
     if info is None:
         return
     charset = Utils.GetCharSet(mlist.preferred_language)
-    print >> outfp, '##', k.capitalize(), _('options')
+    print >> outfp, '##', k.capitalize(), C_('options')
     print >> outfp, '#'
     # First, massage the descripton text, which could have obnoxious
     # leading whitespace on second and subsequent lines due to
@@ -199,7 +199,7 @@
                     outfp.write('"""\n')
         elif vtype in (mm_cfg.Radio, mm_cfg.Toggle):
             print >> outfp, '#'
-            print >> outfp, '#', _('legal values are:')
+            print >> outfp, '#', C_('legal values are:')
             # TBD: This is disgusting, but it's special cased
             # everywhere else anyway...
             if varname == 'subscribe_policy' and \
@@ -253,7 +253,7 @@
     try:
         mlist = MailList.MailList(listname, lock=not checkonly)
     except Errors.MMListError, e:
-        usage(1, _('No such list "%(listname)s"\n%(e)s'))
+        usage(1, C_('No such list "%(listname)s"\n%(e)s'))
     savelist = 0
     guibyprop = getPropertyMap(mlist)
     try:
@@ -266,16 +266,16 @@
             if k in ('mlist', '__builtins__'):
                 continue
             if not hasattr(mlist, k):
-                print >> sys.stderr, _('attribute "%(k)s" ignored')
+                print >> sys.stderr, C_('attribute "%(k)s" ignored')
                 continue
             if verbose:
-                print >> sys.stderr, _('attribute "%(k)s" changed')
+                print >> sys.stderr, C_('attribute "%(k)s" changed')
             missing = []
             gui, wtype = guibyprop.get(k, (missing, missing))
             if gui is missing:
                 # This isn't an official property of the list, but that's
                 # okay, we'll just restore it the old fashioned way
-                print >> sys.stderr, _('Non-standard property restored: %(k)s')
+                print >> sys.stderr, C_('Non-standard property restored: %(k)s')
                 setattr(mlist, k, v)
             else:
                 # BAW: This uses non-public methods.  This logic taken from
@@ -283,9 +283,9 @@
                 try:
                     validval = gui._getValidValue(mlist, k, wtype, v)
                 except ValueError:
-                    print >> sys.stderr, _('Invalid value for property: %(k)s')
+                    print >> sys.stderr, C_('Invalid value for property: %(k)s')
                 except Errors.EmailAddressError:
-                    print >> sys.stderr, _(
+                    print >> sys.stderr, C_(
                         'Bad email address for option %(k)s: %(v)s')
                 else:
                     # BAW: Horrible hack, but then this is special cased
@@ -342,13 +342,13 @@
 
     # sanity check
     if infile is not None and outfile is not None:
-        usage(1, _('Only one of -i or -o is allowed'))
+        usage(1, C_('Only one of -i or -o is allowed'))
     if infile is None and outfile is None:
-        usage(1, _('One of -i or -o is required'))
+        usage(1, C_('One of -i or -o is required'))
 
     # get the list name
     if len(args) <> 1:
-        usage(1, _('List name is required'))
+        usage(1, C_('List name is required'))
     listname = args[0].lower().strip()
 
     if outfile:
diff -ruN mailman-2.1.12-a/bin/convert.py mailman-2.1.12-b/bin/convert.py
--- mailman-2.1.12-a/bin/convert.py     2009-02-23 22:23:35.000000000 +0100
+++ mailman-2.1.12-b/bin/convert.py     2009-07-28 12:19:54.000000000 +0200
@@ -25,7 +25,7 @@
 
 import paths
 from Mailman import Utils
-from Mailman.i18n import _
+from Mailman.i18n import C_
 
 def convert(mlist):
     for attr in ('msg_header', 'msg_footer', 'digest_header', 'digest_footer',
@@ -35,10 +35,10 @@
         t = Utils.to_dollar(s)
         setattr(mlist, attr, t)
     mlist.use_dollar_strings = 1
-    print _('Saving list')
+    print C_('Saving list')
     mlist.Save()
 
 
 
 if __name__ == '__main__':
-    print _(__doc__.replace('%', '%%'))
+    print C_(__doc__.replace('%', '%%'))
diff -ruN mailman-2.1.12-a/bin/discard mailman-2.1.12-b/bin/discard
--- mailman-2.1.12-a/bin/discard        2009-02-23 22:23:35.000000000 +0100
+++ mailman-2.1.12-b/bin/discard        2009-07-28 12:19:54.000000000 +0200
@@ -41,7 +41,7 @@
 import paths
 from Mailman import mm_cfg
 from Mailman.MailList import MailList
-from Mailman.i18n import _
+from Mailman.i18n import C_
 
 try:
     True, False
@@ -58,7 +58,7 @@
         fd = sys.stderr
     else:
         fd = sys.stdout
-    print >> fd, _(__doc__)
+    print >> fd, C_(__doc__)
     if msg:
         print >> fd, msg
     sys.exit(code)
@@ -80,7 +80,7 @@
 
     files = args
     if not files:
-        print _('Nothing to do.')
+        print C_('Nothing to do.')
 
     # Mapping from listnames to sequence of request ids
     discards = {}
@@ -91,13 +91,13 @@
         basename = os.path.basename(f)
         mo = cre.match(basename)
         if not mo:
-            print >> sys.stderr, _('Ignoring non-held message: %(f)s')
+            print >> sys.stderr, C_('Ignoring non-held message: %(f)s')
             continue
         listname, id = mo.group('listname', 'id')
         try:
             id = int(id)
         except (ValueError, TypeError):
-            print >> sys.stderr, _('Ignoring held msg w/bad id: %(f)s')
+            print >> sys.stderr, C_('Ignoring held msg w/bad id: %(f)s')
             continue
         discards.setdefault(listname, []).append(id)
 
@@ -109,7 +109,7 @@
                 # No comment, no preserve, no forward, no forwarding address
                 mlist.HandleRequest(id, mm_cfg.DISCARD, '', False, False, '')
                 if not quiet:
-                    print _('Discarded held msg #%(id)s for list %(listname)s')
+                    print C_('Discarded held msg #%(id)s for list %(listname)s')
             mlist.Save()
         finally:
             mlist.Unlock()
diff -ruN mailman-2.1.12-a/bin/dumpdb mailman-2.1.12-b/bin/dumpdb
--- mailman-2.1.12-a/bin/dumpdb 2009-02-23 22:23:35.000000000 +0100
+++ mailman-2.1.12-b/bin/dumpdb 2009-07-28 12:19:54.000000000 +0200
@@ -54,7 +54,7 @@
 
 import paths
 # Import this /after/ paths so that the sys.path is properly hacked
-from Mailman.i18n import _
+from Mailman.i18n import C_
 
 PROGRAM = sys.argv[0]
 COMMASPACE = ', '
@@ -72,7 +72,7 @@
         fd = sys.stderr
     else:
         fd = sys.stdout
-    print >> fd, _(__doc__) % globals()
+    print >> fd, C_(__doc__) % globals()
     if msg:
         print >> fd, msg
     sys.exit(code)
@@ -102,10 +102,10 @@
             doprint = False
 
     if len(args) < 1:
-        usage(1, _('No filename given.'))
+        usage(1, C_('No filename given.'))
     elif len(args) > 1:
         pargs = COMMASPACE.join(args)
-        usage(1, _('Bad arguments: %(pargs)s'))
+        usage(1, C_('Bad arguments: %(pargs)s'))
     else:
         filename = args[0]
 
@@ -115,7 +115,7 @@
         elif filename.endswith('.pck'):
             filetype = 0
         else:
-            usage(1, _('Please specify either -p or -m.'))
+            usage(1, C_('Please specify either -p or -m.'))
 
     # Handle dbs
     pp = pprint.PrettyPrinter(indent=4)
@@ -130,16 +130,16 @@
     try:
         cnt = 1
         if doprint:
-            print _('[----- start %(typename)s file -----]')
+            print C_('[----- start %(typename)s file -----]')
         while True:
             try:
                 obj = load(fp)
             except EOFError:
                 if doprint:
-                    print _('[----- end %(typename)s file -----]')
+                    print C_('[----- end %(typename)s file -----]')
                 break
             if doprint:
-                print _('<----- start object %(cnt)s ----->')
+                print C_('<----- start object %(cnt)s ----->')
                 if isinstance(obj, StringType):
                     print obj
                 else:
diff -ruN mailman-2.1.12-a/bin/find_member mailman-2.1.12-b/bin/find_member
--- mailman-2.1.12-a/bin/find_member    2009-02-23 22:23:35.000000000 +0100
+++ mailman-2.1.12-b/bin/find_member    2009-07-28 12:19:54.000000000 +0200
@@ -64,7 +64,7 @@
 from Mailman import Utils
 from Mailman import MailList
 from Mailman import Errors
-from Mailman.i18n import _
+from Mailman.i18n import C_
 
 AS_MEMBER = 0x01
 AS_OWNER = 0x02
@@ -94,7 +94,7 @@
         try:
             mlist = MailList.MailList(listname, lock=0)
         except Errors.MMListError:
-            print _('No such list: %(listname)s')
+            print C_('No such list: %(listname)s')
             continue
         if options.owners:
             owners = mlist.owner
@@ -156,12 +156,12 @@
             pass
 
     if not args:
-        usage(1, _('Search regular expression required'))
+        usage(1, C_('Search regular expression required'))
 
     options.regexps = args
 
     if not options.listnames:
-        print _('No lists to search')
+        print C_('No lists to search')
         return
 
     matches = scanlists(options)
@@ -170,13 +170,13 @@
     for k in addrs:
         hits = matches[k]
         lists = hits.keys()
-        print k, _('found in:')
+        print k, C_('found in:')
         for name in lists:
             aswhat = hits[name]
             if aswhat & AS_MEMBER:
                 print '    ', name
             if aswhat & AS_OWNER:
-                print '    ', name, _('(as owner)')
+                print '    ', name, C_('(as owner)')
 
 
 
diff -ruN mailman-2.1.12-a/bin/fix_url.py mailman-2.1.12-b/bin/fix_url.py
--- mailman-2.1.12-a/bin/fix_url.py     2009-02-23 22:23:35.000000000 +0100
+++ mailman-2.1.12-b/bin/fix_url.py     2009-07-28 12:19:54.000000000 +0200
@@ -43,12 +43,12 @@
 
 import paths
 from Mailman import mm_cfg
-from Mailman.i18n import _
+from Mailman.i18n import C_
 
 
 
 def usage(code, msg=''):
-    print _(__doc__.replace('%', '%%'))
+    print C_(__doc__.replace('%', '%%'))
     if msg:
         print msg
     sys.exit(code)
@@ -77,12 +77,12 @@
         mailhost = mm_cfg.DEFAULT_EMAIL_HOST
 
     if verbose:
-        print _('Setting web_page_url to: %(web_page_url)s')
+        print C_('Setting web_page_url to: %(web_page_url)s')
     mlist.web_page_url = web_page_url
     if verbose:
-        print _('Setting host_name to: %(mailhost)s')
+        print C_('Setting host_name to: %(mailhost)s')
     mlist.host_name = mailhost
-    print _('Saving list')
+    print C_('Saving list')
     mlist.Save()
     mlist.Unlock()
 
diff -ruN mailman-2.1.12-a/bin/genaliases mailman-2.1.12-b/bin/genaliases
--- mailman-2.1.12-a/bin/genaliases     2009-02-23 22:23:35.000000000 +0100
+++ mailman-2.1.12-b/bin/genaliases     2009-07-28 12:19:54.000000000 +0200
@@ -40,7 +40,7 @@
 from Mailman import mm_cfg
 from Mailman import Utils
 from Mailman import MailList
-from Mailman.i18n import _
+from Mailman.i18n import C_
 
 try:
     True, False
diff -ruN mailman-2.1.12-a/bin/inject mailman-2.1.12-b/bin/inject
--- mailman-2.1.12-a/bin/inject 2009-02-23 22:23:35.000000000 +0100
+++ mailman-2.1.12-b/bin/inject 2009-07-28 12:19:54.000000000 +0200
@@ -48,7 +48,7 @@
 from Mailman import mm_cfg
 from Mailman import Utils
 from Mailman import Post
-from Mailman.i18n import _
+from Mailman.i18n import C_
 
 
 
@@ -57,7 +57,7 @@
         fd = sys.stderr
     else:
         fd = sys.stdout
-    print >> fd, _(__doc__)
+    print >> fd, C_(__doc__)
     if msg:
         print >> fd, msg
     sys.exit(code)
@@ -81,14 +81,14 @@
         elif opt in ('-q', '--queue'):
             qdir = os.path.join(mm_cfg.QUEUE_DIR, arg)
             if not os.path.isdir(qdir):
-                usage(1, _('Bad queue directory: %(qdir)s'))
+                usage(1, C_('Bad queue directory: %(qdir)s'))
         elif opt in ('-l', '--listname'):
             listname = arg.lower()
 
     if listname is None:
-        usage(1, _('A list name is required'))
+        usage(1, C_('A list name is required'))
     elif not Utils.list_exists(listname):
-        usage(1, _('No such list: %(listname)s'))
+        usage(1, C_('No such list: %(listname)s'))
 
     if len(args) == 0:
         # Use standard input
diff -ruN mailman-2.1.12-a/bin/list_admins mailman-2.1.12-b/bin/list_admins
--- mailman-2.1.12-a/bin/list_admins    2009-02-23 22:23:35.000000000 +0100
+++ mailman-2.1.12-b/bin/list_admins    2009-07-28 12:19:54.000000000 +0200
@@ -45,7 +45,7 @@
 import paths
 from Mailman import MailList, Utils
 from Mailman import Errors
-from Mailman.i18n import _
+from Mailman.i18n import C_
 
 COMMASPACE = ', '
 
@@ -58,7 +58,7 @@
         fd = sys.stderr
     else:
         fd = sys.stdout
-    print >> fd, _(__doc__)
+    print >> fd, C_(__doc__)
     if msg:
         print >> fd, msg
     sys.exit(code)
@@ -87,14 +87,14 @@
        try:
            mlist = MailList.MailList(listname, lock=0)
        except Errors.MMListError, e:
-           print _('No such list: %(listname)s')
+           print C_('No such list: %(listname)s')
            continue
 
        if vhost and vhost <> mlist.host_name:
            continue
 
        owners = COMMASPACE.join(mlist.owner)
-       print _('List: %(listname)s, \tOwners: %(owners)s')
+       print C_('List: %(listname)s, \tOwners: %(owners)s')
 
 
 
diff -ruN mailman-2.1.12-a/bin/list_lists mailman-2.1.12-b/bin/list_lists
--- mailman-2.1.12-a/bin/list_lists     2009-02-23 22:23:35.000000000 +0100
+++ mailman-2.1.12-b/bin/list_lists     2009-07-28 12:19:54.000000000 +0200
@@ -47,7 +47,7 @@
 from Mailman import MailList
 from Mailman import Utils
 from Mailman import Errors
-from Mailman.i18n import _
+from Mailman.i18n import C_
 
 program = sys.argv[0]
 
@@ -56,7 +56,7 @@
         fd = sys.stderr
     else:
         fd = sys.stdout
-    print >> fd, _(__doc__)
+    print >> fd, C_(__doc__)
     if msg:
         print >> fd, msg
     sys.exit(code)
@@ -102,18 +102,18 @@
         longest = max(len(mlist.real_name), longest)
 
     if not mlists and not bare:
-        print _('No matching mailing lists found')
+        print C_('No matching mailing lists found')
         return
 
     if not bare:
-        print len(mlists), _('matching mailing lists found:')
+        print len(mlists), C_('matching mailing lists found:')
 
     format = '%%%ds - %%.%ds' % (longest, 77 - longest)
     for mlist in mlists:
         if bare:
             print mlist.internal_name()
         else:
-            description = mlist.description or _('[no description available]')
+            description = mlist.description or C_('[no description available]')
             print '   ', format % (mlist.real_name, description)
 
 
diff -ruN mailman-2.1.12-a/bin/list_members mailman-2.1.12-b/bin/list_members
--- mailman-2.1.12-a/bin/list_members   2009-02-23 22:23:35.000000000 +0100
+++ mailman-2.1.12-b/bin/list_members   2009-07-28 12:19:54.000000000 +0200
@@ -76,7 +76,7 @@
 from Mailman import MailList
 from Mailman import Errors
 from Mailman import MemberAdaptor
-from Mailman.i18n import _
+from Mailman.i18n import C_
 
 from email.Utils import formataddr
 
@@ -104,7 +104,7 @@
         fd = sys.stderr
     else:
         fd = sys.stdout
-    print >> fd, _(__doc__)
+    print >> fd, C_(__doc__)
     if msg:
         print >> fd, msg
     sys.exit(code)
@@ -188,7 +188,7 @@
             if i >= 0:
                 why = opt[i+1:]
                 if why not in WHYCHOICES.keys():
-                    usage(1, _('Bad --nomail option: %(why)s'))
+                    usage(1, C_('Bad --nomail option: %(why)s'))
         elif opt == '-d':
             digest = True
             if args and args[0] in ('mime', 'plain'):
@@ -199,7 +199,7 @@
             if i >= 0:
                 kind = opt[i+1:]
                 if kind not in ('mime', 'plain'):
-                    usage(1, _('Bad --digest option: %(kind)s'))
+                    usage(1, C_('Bad --digest option: %(kind)s'))
         elif opt in ('-i', '--invalid'):
             invalidonly = True
         elif opt in ('-u', '--unicode'):
@@ -221,7 +221,7 @@
         try:
             fp = open(outfile, 'w')
         except IOError:
-            print >> sys.stderr, _('Could not open file for writing:'), outfile
+            print >> sys.stderr, C_('Could not open file for writing:'), outfile
             sys.exit(1)
     else:
         fp = sys.stdout
@@ -229,7 +229,7 @@
     try:
         mlist = MailList.MailList(listname, lock=False)
     except Errors.MMListError, e:
-        print >> sys.stderr, _('No such list: %(listname)s')
+        print >> sys.stderr, C_('No such list: %(listname)s')
         sys.exit(1)
 
     # Get the lowercased member addresses
diff -ruN mailman-2.1.12-a/bin/list_owners mailman-2.1.12-b/bin/list_owners
--- mailman-2.1.12-a/bin/list_owners    2009-02-23 22:23:35.000000000 +0100
+++ mailman-2.1.12-b/bin/list_owners    2009-07-28 12:19:54.000000000 +0200
@@ -45,7 +45,7 @@
 import paths
 from Mailman import Utils
 from Mailman.MailList import MailList
-from Mailman.i18n import _
+from Mailman.i18n import C_
 
 PROGRAM = sys.argv[0]
 
@@ -62,7 +62,7 @@
         fd = sys.stderr
     else:
         fd = sys.stdout
-    print >> fd, _(__doc__)
+    print >> fd, C_(__doc__)
     if msg:
         print >> fd, msg
     sys.exit(code)
diff -ruN mailman-2.1.12-a/bin/mailmanctl mailman-2.1.12-b/bin/mailmanctl
--- mailman-2.1.12-a/bin/mailmanctl     2009-07-28 12:19:48.000000000 +0200
+++ mailman-2.1.12-b/bin/mailmanctl     2009-07-28 12:19:54.000000000 +0200
@@ -111,7 +111,7 @@
 from Mailman import LockFile
 from Mailman import Errors
 from Mailman.MailList import MailList
-from Mailman.i18n import _
+from Mailman.i18n import C_
 from Mailman.Logging.Syslog import syslog
 from Mailman.Logging.Utils import LogStdErr
 
@@ -136,7 +136,7 @@
         fd = sys.stderr
     else:
         fd = sys.stdout
-    print >> fd, _(__doc__)
+    print >> fd, C_(__doc__)
     if msg:
         print >> fd, msg
     sys.exit(code)
@@ -152,17 +152,17 @@
     except (IOError, ValueError), e:
         # For i18n convenience
         pidfile = mm_cfg.PIDFILE
-        print >> sys.stderr, _('PID unreadable in: %(pidfile)s')
+        print >> sys.stderr, C_('PID unreadable in: %(pidfile)s')
         print >> sys.stderr, e
-        print >> sys.stderr, _('Is qrunner even running?')
+        print >> sys.stderr, C_('Is qrunner even running?')
         return
     try:
         os.kill(pid, sig)
     except OSError, e:
         if e.errno <> errno.ESRCH: raise
-        print >> sys.stderr, _('No child with pid: %(pid)s')
+        print >> sys.stderr, C_('No child with pid: %(pid)s')
         print >> sys.stderr, e
-        print >> sys.stderr, _('Stale pid file removed.')
+        print >> sys.stderr, C_('Stale pid file removed.')
         os.unlink(mm_cfg.PIDFILE)
 
 
@@ -266,19 +266,19 @@
         status = qrunner_state()
         if status == 1:
             # host matches and proc exists
-            print >> sys.stderr, _("""\
+            print >> sys.stderr, C_("""\
 The master qrunner lock could not be acquired because it appears as if another
 master qrunner is already running.
 """)
         elif status == 0:
             # host matches but no proc
-            print >> sys.stderr, _("""\
+            print >> sys.stderr, C_("""\
 The master qrunner lock could not be acquired.  It appears as though there is
 a stale master qrunner lock.  Try re-running mailmanctl with the -s flag.
 """)
         else:
             # host doesn't even match
-            print >> sys.stderr, _("""\
+            print >> sys.stderr, C_("""\
 The master qrunner lock could not be acquired, because it appears as if some
 process on some other host may have acquired it.  We can't test for stale
 locks across host boundaries, so you'll have to do this manually.  Or, if you
@@ -325,7 +325,7 @@
     try:
         sitelist = MailList(sitelistname, lock=0)
     except Errors.MMUnknownListError:
-        print >> sys.stderr, _('Site list is missing: %(sitelistname)s')
+        print >> sys.stderr, C_('Site list is missing: %(sitelistname)s')
         syslog('error', 'Site list is missing: %s', mm_cfg.MAILMAN_SITE_LIST)
         sys.exit(1)
 
@@ -350,7 +350,7 @@
         os.setuid(uid)
     elif myuid <> uid:
         name = mm_cfg.MAILMAN_USER
-        usage(1, _(
+        usage(1, C_(
             'Run this program as root or as the %(name)s user, or use -u.'))
 
 
@@ -381,10 +381,10 @@
             quiet = 1
 
     if len(args) < 1:
-        usage(1, _('No command given.'))
+        usage(1, C_('No command given.'))
     elif len(args) > 1:
         command = COMMASPACE.join(args)
-        usage(1, _('Bad command: %(command)s'))
+        usage(1, C_('Bad command: %(command)s'))
 
     command = args[0].lower()
 
@@ -392,7 +392,7 @@
         check_privs()
     else:
         if command != 'status':
-           print _('Warning!  You may encounter permission problems.')
+           print C_('Warning!  You may encounter permission problems.')
 
     # Handle the commands
     if command == 'stop':
@@ -400,26 +400,26 @@
         # giving cron/qrunner a ctrl-c or KeyboardInterrupt.  This will
         # effectively shut everything down.
         if not quiet:
-            print _("Shutting down Mailman's master qrunner")
+            print C_("Shutting down Mailman's master qrunner")
         kill_watcher(signal.SIGTERM)
     elif command == 'restart':
         # Sent the master qrunner process a SIGHUP.  This will cause the
         # master qrunner to kill and restart all the worker qrunners, and to
         # close and re-open its log files.
         if not quiet:
-            print _("Restarting Mailman's master qrunner")
+            print C_("Restarting Mailman's master qrunner")
         kill_watcher(signal.SIGINT)
     elif command == 'reopen':
         if not quiet:
-            print _('Re-opening all log files')
+            print C_('Re-opening all log files')
         kill_watcher(signal.SIGHUP)
     elif command == 'status':
         status, pid = mailman_status()
         if not quiet:
             if status == 0:
-                print _("mailman (pid %(pid)d) is running...")
+                print C_("mailman (pid %(pid)d) is running...")
             else:
-                print _("mailman is stopped")
+                print C_("mailman is stopped")
         sys.exit(status)
     elif command == 'start':
         # First, complain loudly if there's no site list.
@@ -455,7 +455,7 @@
         if pid:
             # parent
             if not quiet:
-                print _("Starting Mailman's master qrunner.")
+                print C_("Starting Mailman's master qrunner.")
             # Give up the lock "ownership".  This just means the foreground
             # process won't close/unlock the lock when it finalizes this lock
             # instance.  We'll let the mater watcher subproc own the lock.
diff -ruN mailman-2.1.12-a/bin/mmsitepass mailman-2.1.12-b/bin/mmsitepass
--- mailman-2.1.12-a/bin/mmsitepass     2009-02-23 22:23:35.000000000 +0100
+++ mailman-2.1.12-b/bin/mmsitepass     2009-07-28 12:19:54.000000000 +0200
@@ -43,7 +43,7 @@
 
 import paths
 from Mailman import Utils
-from Mailman.i18n import _
+from Mailman.i18n import C_
 
 PROGRAM = sys.argv[0]
 
@@ -70,34 +70,34 @@
 
     # Defaults
     siteadmin = 1
-    pwdesc = _('site')
+    pwdesc = C_('site')
 
     for opt, arg in opts:
         if opt in ('-h', '--help'):
             usage(0)
         elif opt in ('-c', '--listcreator'):
             siteadmin = 0
-            pwdesc = _('list creator')
+            pwdesc = C_('list creator')
 
     if len(args) == 1:
         pw1 = args[0]
     else:
         try:
-            pw1 = getpass.getpass(_('New %(pwdesc)s password: '))
-            pw2 = getpass.getpass(_('Again to confirm password: '))
+            pw1 = getpass.getpass(C_('New %(pwdesc)s password: '))
+            pw2 = getpass.getpass(C_('Again to confirm password: '))
             if pw1 <> pw2:
-                print _('Passwords do not match; no changes made.')
+                print C_('Passwords do not match; no changes made.')
                 sys.exit(1)
         except KeyboardInterrupt:
-            print _('Interrupted...')
+            print C_('Interrupted...')
             sys.exit(0)
     # Set the site password by writing it to a local file.  Make sure the
     # permissions don't allow other+read.
     Utils.set_global_password(pw1, siteadmin)
     if Utils.check_global_password(pw1, siteadmin):
-        print _('Password changed.')
+        print C_('Password changed.')
     else:
-        print _('Password change failed.')
+        print C_('Password change failed.')
 
 
 
diff -ruN mailman-2.1.12-a/bin/newlist mailman-2.1.12-b/bin/newlist
--- mailman-2.1.12-a/bin/newlist        2009-07-28 12:19:50.000000000 +0200
+++ mailman-2.1.12-b/bin/newlist        2009-07-28 12:19:54.000000000 +0200
@@ -103,7 +103,7 @@
 from Mailman import Message
 from Mailman import i18n
 
-_ = i18n._
+C_ = i18n.C_
 
 PROGRAM = sys.argv[0]
 
@@ -114,7 +114,7 @@
         fd = sys.stderr
     else:
         fd = sys.stdout
-    print >> fd, _(__doc__)
+    print >> fd, C_(__doc__)
     if msg:
         print >> fd, msg
     sys.exit(code)
@@ -147,12 +147,12 @@
 
     # Is the language known?
     if lang not in mm_cfg.LC_DESCRIPTIONS.keys():
-        usage(1, _('Unknown language: %(lang)s'))
+        usage(1, C_('Unknown language: %(lang)s'))
 
     if len(args) > 0:
         listname = args[0]
     else:
-        listname = raw_input(_('Enter the name of the list: '))
+        listname = raw_input(C_('Enter the name of the list: '))
     listname = listname.lower()
 
     if '@' in listname:
@@ -167,22 +167,22 @@
     web_page_url = mm_cfg.DEFAULT_URL_PATTERN % urlhost
 
     if Utils.list_exists(listname):
-        usage(1, _('List already exists: %(listname)s'))
+        usage(1, C_('List already exists: %(listname)s'))
 
     if len(args) > 1:
         owner_mail = args[1]
     else:
         owner_mail = raw_input(
-            _('Enter the email of the person running the list: '))
+            C_('Enter the email of the person running the list: '))
 
     if len(args) > 2:
         listpasswd = args[2]
     else:
-        listpasswd = getpass.getpass(_('Initial %(listname)s password: '))
+        listpasswd = getpass.getpass(C_('Initial %(listname)s password: '))
     # List passwords cannot be empty
     listpasswd = listpasswd.strip()
     if not listpasswd:
-        usage(1, _('The list password cannot be empty'))
+        usage(1, C_('The list password cannot be empty'))
 
     mlist = MailList.MailList()
     try:
@@ -201,11 +201,11 @@
             finally:
                 os.umask(oldmask)
         except Errors.BadListNameError, s:
-            usage(1, _('Illegal list name: %(s)s'))
+            usage(1, C_('Illegal list name: %(s)s'))
         except Errors.EmailAddressError, s:
-            usage(1, _('Bad owner email address: %(s)s'))
+            usage(1, C_('Bad owner email address: %(s)s'))
         except Errors.MMListAlreadyExistsError:
-            usage(1, _('List already exists: %(listname)s'))
+            usage(1, C_('List already exists: %(listname)s'))
 
         # Assign domain-specific attributes
         mlist.host_name = host_name
@@ -226,7 +226,7 @@
 
     # And send the notice to the list owner
     if not quiet:
-        print _('Hit enter to notify %(listname)s owner...'),
+        print C_('Hit enter to notify %(listname)s owner...'),
         sys.stdin.readline()
         siteowner = Utils.get_site_email(mlist.host_name, 'owner')
         text = Utils.maketext(
diff -ruN mailman-2.1.12-a/bin/qrunner mailman-2.1.12-b/bin/qrunner
--- mailman-2.1.12-a/bin/qrunner        2009-02-23 22:23:35.000000000 +0100
+++ mailman-2.1.12-b/bin/qrunner        2009-07-28 12:19:54.000000000 +0200
@@ -78,7 +78,7 @@
 
 import paths
 from Mailman import mm_cfg
-from Mailman.i18n import _
+from Mailman.i18n import C_
 from Mailman.Logging.Syslog import syslog
 from Mailman.Logging.Utils import LogStdErr
 
@@ -95,7 +95,7 @@
         fd = sys.stderr
     else:
         fd = sys.stdout
-    print >> fd, _(__doc__)
+    print >> fd, C_(__doc__)
     if msg:
         print >> fd, msg
     sys.exit(code)
@@ -175,8 +175,8 @@
                     name = runnername[:-len('Runner')]
                 else:
                     name = runnername
-                print _('%(name)s runs the %(runnername)s qrunner')
-            print _('All runs all the above qrunners')
+                print C_('%(name)s runs the %(runnername)s qrunner')
+            print C_('All runs all the above qrunners')
             sys.exit(0)
         elif opt in ('-o', '--once'):
             once = 1
@@ -212,7 +212,7 @@
     if len(args) <> 0:
         usage(1)
     if len(runners) == 0:
-        usage(1, _('No runner name given.'))
+        usage(1, C_('No runner name given.'))
 
     # Before we startup qrunners, we redirect the stderr to mailman syslog.
     # We assume !AS_SUBPROC is running for debugging purpose and don't
diff -ruN mailman-2.1.12-a/bin/rb-archfix mailman-2.1.12-b/bin/rb-archfix
--- mailman-2.1.12-a/bin/rb-archfix     2009-02-23 22:23:35.000000000 +0100
+++ mailman-2.1.12-b/bin/rb-archfix     2009-07-28 12:19:54.000000000 +0200
@@ -52,7 +52,7 @@
 
 # Required to get the right classes for unpickling
 import paths
-from Mailman.i18n import _
+from Mailman.i18n import C_
 
 PROGRAM = sys.argv[0]
 
@@ -63,7 +63,7 @@
         fd = sys.stderr
     else:
         fd = sys.stdout
-    print >> fd, _(__doc__)
+    print >> fd, C_(__doc__)
     if msg:
         print >> fd, msg
     sys.exit(code)
diff -ruN mailman-2.1.12-a/bin/remove_members mailman-2.1.12-b/bin/remove_members
--- mailman-2.1.12-a/bin/remove_members 2009-02-23 22:23:35.000000000 +0100
+++ mailman-2.1.12-b/bin/remove_members 2009-07-28 12:19:54.000000000 +0200
@@ -66,7 +66,7 @@
 from Mailman import MailList
 from Mailman import Utils
 from Mailman import Errors
-from Mailman.i18n import _
+from Mailman.i18n import C_
 
 try:
     True, False
@@ -81,7 +81,7 @@
         fd = sys.stderr
     else:
         fd = sys.stdout
-    print >> fd, _(__doc__)
+    print >> fd, C_(__doc__)
     if msg:
         print >> fd, msg
     sys.exit(code)
@@ -153,14 +153,14 @@
         try:
             addresses = addresses + ReadFile(filename)
         except IOError:
-            print _('Could not open file for reading: %(filename)s.')
+            print C_('Could not open file for reading: %(filename)s.')
 
     for listname in listnames:
        try:
            # open locked
            mlist = MailList.MailList(listname)
        except Errors.MMListError:
-           print _('Error opening list %(listname)s... skipping.')
+           print C_('Error opening list %(listname)s... skipping.')
            continue
 
        if all:
@@ -170,12 +170,12 @@
            for addr in addresses:
                if not mlist.isMember(addr):
                    if not alllists:
-                       print _('No such member: %(addr)s')
+                       print C_('No such member: %(addr)s')
                    continue
                mlist.ApprovedDeleteMember(addr, 'bin/remove_members',
                                           admin_notif, userack)
                if alllists:
-                   print _("User `%(addr)s' removed from list: %(listname)s.")
+                   print C_("User `%(addr)s' removed from list: %(listname)s.")
            mlist.Save()
        finally:
            mlist.Unlock()
diff -ruN mailman-2.1.12-a/bin/rmlist mailman-2.1.12-b/bin/rmlist
--- mailman-2.1.12-a/bin/rmlist 2009-02-23 22:23:35.000000000 +0100
+++ mailman-2.1.12-b/bin/rmlist 2009-07-28 12:19:54.000000000 +0200
@@ -45,7 +45,7 @@
 from Mailman import mm_cfg
 from Mailman import Utils
 from Mailman import MailList
-from Mailman.i18n import _
+from Mailman.i18n import C_
 
 try:
     True, False
@@ -60,7 +60,7 @@
         fd = sys.stderr
     else:
         fd = sys.stdout
-    print >> fd, _(__doc__)
+    print >> fd, C_(__doc__)
     if msg:
         print >> fd, msg
     sys.exit(code)
@@ -69,15 +69,15 @@
 
 def remove_it(listname, filename, msg):
     if os.path.islink(filename):
-        print _('Removing %(msg)s')
+        print C_('Removing %(msg)s')
         os.unlink(filename)
     elif os.path.isdir(filename):
-        print _('Removing %(msg)s')
+        print C_('Removing %(msg)s')
         shutil.rmtree(filename)
     elif os.path.isfile(filename):
         os.unlink(filename)
     else:
-        print _('%(listname)s %(msg)s not found as %(filename)s')
+        print C_('%(listname)s %(msg)s not found as %(filename)s')
 
 
 
@@ -101,13 +101,13 @@
 
     if not Utils.list_exists(listname):
         if not removeArchives:
-            usage(1, _('No such list (or list already deleted): %(listname)s'))
+            usage(1, C_('No such list (or list already deleted): %(listname)s'))
         else:
-            print _(
+            print C_(
                 'No such list: %(listname)s.  Removing its residual archives.')
 
     if not removeArchives:
-        print _('Not removing archives.  Reinvoke with -a to remove them.')
+        print C_('Not removing archives.  Reinvoke with -a to remove them.')
 
 
     REMOVABLES = []
@@ -121,7 +121,7 @@
             sys.modules[modname].remove(mlist)
 
         REMOVABLES = [
-            (os.path.join('lists', listname), _('list info')),
+            (os.path.join('lists', listname), C_('list info')),
             ]
 
     # Remove any stale locks associated with the list
@@ -129,18 +129,18 @@
         fn_listname = filename.split('.')[0]
         if fn_listname == listname:
             REMOVABLES.append((os.path.join(mm_cfg.LOCK_DIR, filename),
-                               _('stale lock file')))
+                               C_('stale lock file')))
 
     if removeArchives:
         REMOVABLES.extend([
             (os.path.join('archives', 'private', listname),
-             _('private archives')),
+             C_('private archives')),
             (os.path.join('archives', 'private', listname + '.mbox'),
-             _('private archives')),
+             C_('private archives')),
             (os.path.join('archives', 'public', listname),
-             _('public archives')),
+             C_('public archives')),
             (os.path.join('archives', 'public', listname + '.mbox'),
-             _('public archives')),
+             C_('public archives')),
             ])
 
     for dirtmpl, msg in REMOVABLES:
diff -ruN mailman-2.1.12-a/bin/show_qfiles mailman-2.1.12-b/bin/show_qfiles
--- mailman-2.1.12-a/bin/show_qfiles    2009-02-23 22:23:35.000000000 +0100
+++ mailman-2.1.12-b/bin/show_qfiles    2009-07-28 12:19:54.000000000 +0200
@@ -37,7 +37,7 @@
 from cPickle import load
 
 import paths
-from Mailman.i18n import _
+from Mailman.i18n import C_
 
 try:
     True, False
@@ -52,7 +52,7 @@
         fd = sys.stderr
     else:
         fd = sys.stdout
-    print >> fd, _(__doc__)
+    print >> fd, C_(__doc__)
     if msg:
         print >> fd, msg
     sys.exit(code)
diff -ruN mailman-2.1.12-a/bin/sync_members mailman-2.1.12-b/bin/sync_members
--- mailman-2.1.12-a/bin/sync_members   2009-02-23 22:23:35.000000000 +0100
+++ mailman-2.1.12-b/bin/sync_members   2009-07-28 12:19:54.000000000 +0200
@@ -86,7 +86,7 @@
 from Mailman import Errors
 from Mailman import Utils
 from Mailman.UserDesc import UserDesc
-from Mailman.i18n import _
+from Mailman.i18n import C_
 
 
 
@@ -97,7 +97,7 @@
         fd = sys.stderr
     else:
         fd = sys.stdout
-    print >> fd, _(__doc__)
+    print >> fd, C_(__doc__)
     if msg:
         print >> fd, msg
     sys.exit(code)
@@ -112,7 +112,7 @@
     elif yesno in ('n', 'no'):
         return 0
     else:
-        usage(1, _('Bad choice: %(yesno)s'))
+        usage(1, C_('Bad choice: %(yesno)s'))
         # no return
 
 
@@ -135,7 +135,7 @@
         elif opt in ('-n', '--no-change'):
             dryrun = 1
             i += 1
-            print _('Dry run mode')
+            print C_('Dry run mode')
         elif opt in ('-d', '--digest'):
             digest = 1
             i += 1
@@ -156,11 +156,11 @@
             i += 1
         elif opt in ('-f', '--file'):
             if filename is not None:
-                usage(1, _('Only one -f switch allowed'))
+                usage(1, C_('Only one -f switch allowed'))
             try:
                 filename = sys.argv[i+1]
             except IndexError:
-                usage(1, _('No argument to -f given'))
+                usage(1, C_('No argument to -f given'))
             i += 2
         elif opt in ('-a', '--notifyadmin'):
             notifyadmin = 1
@@ -169,17 +169,17 @@
             notifyadmin = yesno(opt)
             i += 1
         elif opt[0] == '-':
-            usage(1, _('Illegal option: %(opt)s'))
+            usage(1, C_('Illegal option: %(opt)s'))
         else:
             try:
                 listname = sys.argv[i].lower()
                 i += 1
             except IndexError:
-                usage(1, _('No listname given'))
+                usage(1, C_('No listname given'))
             break
 
     if listname is None or filename is None:
-        usage(1, _('Must have a listname and a filename'))
+        usage(1, C_('Must have a listname and a filename'))
 
     # read the list of addresses to sync to from the file
     if filename == '-':
@@ -188,7 +188,7 @@
         try:
             fp = open(filename)
         except IOError, (code, msg):
-            usage(1, _('Cannot read address file: %(filename)s: %(msg)s'))
+            usage(1, C_('Cannot read address file: %(filename)s: %(msg)s'))
         try:
             filemembers = fp.readlines()
         finally:
@@ -200,7 +200,7 @@
         addr = filemembers[i].strip()
         if addr == '' or addr[:1] == '#':
             del filemembers[i]
-            print _('Ignore  :  %(addr)30s')
+            print C_('Ignore  :  %(addr)30s')
 
     # first filter out any invalid addresses
     filemembers = email.Utils.getaddresses(filemembers)
@@ -209,17 +209,17 @@
         try:
             Utils.ValidateEmail(addr)
         except Errors.EmailAddressError:
-            print _('Invalid :  %(addr)30s')
+            print C_('Invalid :  %(addr)30s')
             invalid = 1
     if invalid:
-        print _('You must fix the preceding invalid addresses first.')
+        print C_('You must fix the preceding invalid addresses first.')
         sys.exit(1)
 
     # get the locked list object
     try:
         mlist = MailList.MailList(listname)
     except Errors.MMListError, e:
-        print _('No such list: %(listname)s')
+        print C_('No such list: %(listname)s')
         sys.exit(1)
 
     try:
@@ -241,7 +241,7 @@
                 needsadding[laddr] = (name, addr)
 
         if not needsadding and not addrs:
-            print _('Nothing to do.')
+            print C_('Nothing to do.')
             sys.exit(0)
 
         enc = sys.getdefaultencoding()
@@ -257,11 +257,11 @@
                 if not dryrun:
                     mlist.ApprovedAddMember(userdesc, welcome, notifyadmin)
                 s = email.Utils.formataddr((name, addr)).encode(enc, 'replace')
-                print _('Added  : %(s)s')
+                print C_('Added  : %(s)s')
             except Errors.MMAlreadyAMember:
                 pass
             except Errors.MembershipIsBanned, pattern:
-                print ('%s:' % addr), _('Banned address (matched %(pattern)s)')
+                print ('%s:' % addr), C_('Banned address (matched %(pattern)s)')
 
         for laddr, addr in addrs.items():
             # Should be a member, otherwise our test above is broken
@@ -277,7 +277,7 @@
                     # get rid of this member's entry
                     mlist.removeMember(addr)
             s = email.Utils.formataddr((name, addr)).encode(enc, 'replace')
-            print _('Removed: %(s)s')
+            print C_('Removed: %(s)s')
 
         mlist.Save()
     finally:
diff -ruN mailman-2.1.12-a/bin/transcheck mailman-2.1.12-b/bin/transcheck
--- mailman-2.1.12-a/bin/transcheck     2009-02-23 22:23:35.000000000 +0100
+++ mailman-2.1.12-b/bin/transcheck     2009-07-28 12:19:54.000000000 +0200
@@ -36,7 +36,7 @@
 import getopt
 
 import paths
-from Mailman.i18n import _
+from Mailman.i18n import C_
 
 program = sys.argv[0]
 
@@ -47,7 +47,7 @@
         fd = sys.stderr
     else:
         fd = sys.stdout
-    print >> fd, _(__doc__)
+    print >> fd, C_(__doc__)
     if msg:
         print >> fd, msg
     sys.exit(code)
diff -ruN mailman-2.1.12-a/bin/unshunt mailman-2.1.12-b/bin/unshunt
--- mailman-2.1.12-a/bin/unshunt        2009-02-23 22:23:35.000000000 +0100
+++ mailman-2.1.12-b/bin/unshunt        2009-07-28 12:19:54.000000000 +0200
@@ -38,7 +38,7 @@
 import paths
 from Mailman import mm_cfg
 from Mailman.Queue.sbcache import get_switchboard
-from Mailman.i18n import _
+from Mailman.i18n import C_
 
 
 
@@ -47,7 +47,7 @@
         fd = sys.stderr
     else:
         fd = sys.stdout
-    print >> fd, _(__doc__)
+    print >> fd, C_(__doc__)
     if msg:
         print >> fd, msg
     sys.exit(code)
@@ -82,7 +82,7 @@
         except Exception, e:
             # If there are any unshunting errors, log them and continue trying
             # other shunted messages.
-            print >> sys.stderr, _(
+            print >> sys.stderr, C_(
                 'Cannot unshunt message %(filebase)s, skipping:\n%(e)s')
         else:
             # Unlink the .bak file left by dequeue()
diff -ruN mailman-2.1.12-a/bin/update mailman-2.1.12-b/bin/update
--- mailman-2.1.12-a/bin/update 2009-07-28 12:19:50.000000000 +0200
+++ mailman-2.1.12-b/bin/update 2009-07-28 12:19:54.000000000 +0200
@@ -51,7 +51,7 @@
 from Mailman import Message
 from Mailman import Pending
 from Mailman.LockFile import TimeOutError
-from Mailman.i18n import _
+from Mailman.i18n import C_
 from Mailman.Queue.Switchboard import Switchboard
 from Mailman.OldStyleMemberships import OldStyleMemberships
 from Mailman.MemberAdaptor import BYBOUNCE, ENABLED
@@ -103,7 +103,7 @@
 
 def move_language_templates(mlist):
     listname = mlist.internal_name()
-    print _('Fixing language templates: %(listname)s')
+    print C_('Fixing language templates: %(listname)s')
     # Mailman 2.1 has a new cascading search for its templates, defined and
     # described in Utils.py:maketext().  Putting templates in the top level
     # templates/ subdir or the lists/<listname> subdir is deprecated and no
@@ -192,7 +192,7 @@
     try:
         mlist.Lock(0.5)
     except TimeOutError:
-        print >> sys.stderr, _('WARNING: could not acquire lock for list: '
+        print >> sys.stderr, C_('WARNING: could not acquire lock for list: '
                                '%(listname)s')
         return 1
 
@@ -211,13 +211,13 @@
         # re-disable them if necessary.
         n = len(noinfo)
         if n > 0:
-            print _(
+            print C_(
                 'Resetting %(n)s BYBOUNCEs disabled addrs with no bounce info')
             for addr in noinfo.keys():
                 mlist.setDeliveryStatus(addr, ENABLED)
 
     # Update the held requests database
-    print _("""Updating the held requests database.""")
+    print C_("""Updating the held requests database.""")
     mlist._UpdateRecords()
 
     mbox_dir = make_varabs('archives/private/%s.mbox' % (listname))
@@ -239,7 +239,7 @@
     else:
         # this shouldn't happen, but hey, just in case
         if not os.path.isdir(mbox_dir):
-            print _("""\
+            print C_("""\
 For some reason, %(mbox_dir)s exists as a file.  This won't work with
 b6, so I'm renaming it to %(mbox_dir)s.tmp and proceeding.""")
             os.rename(mbox_dir, "%s.tmp" % (mbox_dir))
@@ -251,7 +251,7 @@
     # private one existing
     if os.path.isfile(o_pri_mbox_file) and os.path.isfile(o_pub_mbox_file):
         if mlist.archive_private:
-            print _("""\
+            print C_("""\
 
 %(listname)s has both public and private mbox archives.  Since this list
 currently uses private archiving, I'm installing the private mbox archive
@@ -266,7 +266,7 @@
         o_pub_mbox_file)
             os.rename(o_pub_mbox_file, "%s.preb6" % (o_pub_mbox_file))
         else:
-            print _("""\
+            print C_("""\
 %s has both public and private mbox archives.  Since this list
 currently uses public archiving, I'm installing the public mbox file
 archive file (%s) as the active one, and renaming
@@ -283,7 +283,7 @@
     # move private archive mbox there if it's around
     # and take into account all sorts of absurdities
     #
-    print _('- updating old private mbox file')
+    print C_('- updating old private mbox file')
     if os.path.exists(o_pri_mbox_file):
         if os.path.isfile(o_pri_mbox_file):
             os.rename(o_pri_mbox_file, mbox_file)
@@ -291,14 +291,14 @@
             newname = "%s.mm_install-dunno_what_this_was_but_its_in_the_way" \
                       % o_pri_mbox_file
             os.rename(o_pri_mbox_file, newname)
-            print _("""\
+            print C_("""\
     unknown file in the way, moving
         %(o_pri_mbox_file)s
     to
         %(newname)s""")
         else:
             # directory
-            print _("""\
+            print C_("""\
     looks like you have a really recent CVS installation...
     you're either one brave soul, or you already ran me""")
 
@@ -307,7 +307,7 @@
     # move public archive mbox there if it's around
     # and take into account all sorts of absurdities.
     #
-    print _('- updating old public mbox file')
+    print C_('- updating old public mbox file')
     if os.path.exists(o_pub_mbox_file):
         if os.path.isfile(o_pub_mbox_file):
             os.rename(o_pub_mbox_file, mbox_file)
@@ -315,13 +315,13 @@
             newname = "%s.mm_install-dunno_what_this_was_but_its_in_the_way" \
                       % o_pub_mbox_file
             os.rename(o_pub_mbox_file, newname)
-            print _("""\
+            print C_("""\
     unknown file in the way, moving
         %(o_pub_mbox_file)s
     to
         %(newname)s""")
         else: # directory
-            print _("""\
+            print C_("""\
     looks like you have a really recent CVS installation...
     you're either one brave soul, or you already ran me""")
 
@@ -353,7 +353,7 @@
         b4_tmpl_dir = os.path.join(tmpl_dir, mlist._internal_name)
         new_tmpl_dir = os.path.join(list_dir, mlist._internal_name)
         if os.path.exists(b4_tmpl_dir):
-            print _("""\
+            print C_("""\
 - This list looks like it might have <= b4 list templates around""")
             for f in os.listdir(b4_tmpl_dir):
                 o_tmpl = os.path.join(b4_tmpl_dir, f)
@@ -361,12 +361,12 @@
                 if os.path.exists(o_tmpl):
                     if not os.path.exists(n_tmpl):
                         os.rename(o_tmpl, n_tmpl)
-                        print _('- moved %(o_tmpl)s to %(n_tmpl)s')
+                        print C_('- moved %(o_tmpl)s to %(n_tmpl)s')
                     else:
-                        print _("""\
+                        print C_("""\
 - both %(o_tmpl)s and %(n_tmpl)s exist, leaving untouched""")
                 else:
-                    print _("""\
+                    print C_("""\
 - %(o_tmpl)s doesn't exist, leaving untouched""")
     #
     # Move all the templates to the en language subdirectory as required for
@@ -396,23 +396,23 @@
     src = '%s/%s' % (mm_cfg.PREFIX, module)
     pyc = src + "c"
     if os.path.isdir(src):
-        print _('removing directory %(src)s and everything underneath')
+        print C_('removing directory %(src)s and everything underneath')
         shutil.rmtree(src)
     elif os.path.exists(src):
-        print _('removing %(src)s')
+        print C_('removing %(src)s')
         try:
             os.unlink(src)
         except os.error, rest:
-            print _("Warning: couldn't remove %(src)s -- %(rest)s")
+            print C_("Warning: couldn't remove %(src)s -- %(rest)s")
     if module.endswith('.py') and os.path.exists(pyc):
         try:
             os.unlink(pyc)
         except os.error, rest:
-            print _("couldn't remove old file %(pyc)s -- %(rest)s")
+            print C_("couldn't remove old file %(pyc)s -- %(rest)s")
 
 
 def update_qfiles():
-    print _('updating old qfiles')
+    print C_('updating old qfiles')
     prefix = `time.time()` + '+'
     # Be sure the qfiles/in directory exists (we don't really need the
     # switchboard object, but it's convenient for creating the directory).
@@ -524,7 +524,7 @@
                 # This message was unparsable, most likely because its
                 # MIME encapsulation was broken.  For now, there's not
                 # much we can do about it.
-                print _('message is unparsable: %(filebase)s')
+                print C_('message is unparsable: %(filebase)s')
                 msgfp.close()
                 msgfp = None
                 if mm_cfg.QRUNNER_SAVE_BAD_MESSAGES:
@@ -557,7 +557,7 @@
     except IOError, e:
         if e.errno <> errno.ENOENT: raise
     else:
-        print _('Updating Mailman 2.0 pending_subscriptions.db database')
+        print C_('Updating Mailman 2.0 pending_subscriptions.db database')
         db = marshal.load(fp)
         # Convert to the pre-Mailman 2.1.5 format
         db = Pending._update(db)
@@ -568,10 +568,10 @@
         except IOError, e:
             if e.errno <> errno.ENOENT: raise
         else:
-            print _('Updating Mailman 2.1.4 pending.pck database')
+            print C_('Updating Mailman 2.1.4 pending.pck database')
             db = cPickle.load(fp)
     if db is None:
-        print _('Nothing to do.')
+        print C_('Nothing to do.')
         return
     # Now upgrade the database to the 2.1.5 format.  Each list now has its own
     # pending.pck file, but only the RE_ENABLE operation actually recorded the
@@ -592,7 +592,7 @@
             op = val[0]
             data = val[1:]
         except (IndexError, ValueError):
-            print _('Ignoring bad pended data: %(key)s: %(val)s')
+            print C_('Ignoring bad pended data: %(key)s: %(val)s')
             continue
         if op in (Pending.UNSUBSCRIPTION, Pending.CHANGE_OF_ADDRESS):
             # data[0] is the address being unsubscribed
@@ -608,7 +608,7 @@
             # data[0] is the hold id.  There better only be one entry per id
             id = data[0]
             if holds_by_id.has_key(id):
-                print _('WARNING: Ignoring duplicate pending ID: %(id)s.')
+                print C_('WARNING: Ignoring duplicate pending ID: %(id)s.')
             else:
                 holds_by_id[id] = (key, val)
     # Now we have to lock every list and re-pend all the appropriate
@@ -661,7 +661,7 @@
 def main():
     errors = 0
     # get rid of old stuff
-    print _('getting rid of old source files')
+    print C_('getting rid of old source files')
     for mod in ('Mailman/Archiver.py', 'Mailman/HyperArch.py',
                 'Mailman/HyperDatabase.py', 'Mailman/pipermail.py',
                 'Mailman/smtplib.py', 'Mailman/Cookie.py',
@@ -671,29 +671,29 @@
         remove_old_sources(mod)
     listnames = Utils.list_names()
     if not listnames:
-        print _('no lists == nothing to do, exiting')
+        print C_('no lists == nothing to do, exiting')
         return
     #
     # for people with web archiving, make sure the directories
     # in the archiving are set with proper perms for b6.
     #
     if os.path.isdir("%s/public_html/archives" % mm_cfg.PREFIX):
-        print _("""\
+        print C_("""\
 fixing all the perms on your old html archives to work with b6
 If your archives are big, this could take a minute or two...""")
         os.path.walk("%s/public_html/archives" % mm_cfg.PREFIX,
                      archive_path_fixer, "")
-        print _('done')
+        print C_('done')
     for listname in listnames:
-        print _('Updating mailing list: %(listname)s')
+        print C_('Updating mailing list: %(listname)s')
         errors = errors + dolist(listname)
         print
-    print _('Updating Usenet watermarks')
+    print C_('Updating Usenet watermarks')
     wmfile = os.path.join(mm_cfg.DATA_DIR, 'gate_watermarks')
     try:
         fp = open(wmfile)
     except IOError:
-        print _('- nothing to update here')
+        print C_('- nothing to update here')
     else:
         d = marshal.load(fp)
         fp.close()
@@ -705,7 +705,7 @@
             try:
                 mlist.Lock(0.5)
             except TimeOutError:
-                print >> sys.stderr, _(
+                print >> sys.stderr, C_(
                     'WARNING: could not acquire lock for list: %(listname)s')
                 errors = errors + 1
             else:
@@ -716,7 +716,7 @@
                 mlist.Save()
                 mlist.Unlock()
         os.unlink(wmfile)
-        print _('- usenet watermarks updated and gate_watermarks removed')
+        print C_('- usenet watermarks updated and gate_watermarks removed')
     # In Mailman 2.1, the pending database format and file name changed, but
     # in Mailman 2.1.5 it changed again.  This should update all existing
     # files to the 2.1.5 format.
@@ -730,7 +730,7 @@
     # There's no good way of figuring this out for releases prior to 2.0beta2
     # :(
     if lastversion == NOTFRESH:
-        print _("""
+        print C_("""
 
 NOTE NOTE NOTE NOTE NOTE
 
@@ -757,7 +757,7 @@
         fd = sys.stderr
     else:
         fd = sys.stdout
-    print >> fd, _(__doc__) % globals()
+    print >> fd, C_(__doc__) % globals()
     if msg:
         print >> sys.stderr, msg
     sys.exit(code)
@@ -787,15 +787,15 @@
     hextversion = hex(thisversion)
     if lastversion == thisversion and not force:
         # nothing to do
-        print _('No updates are necessary.')
+        print C_('No updates are necessary.')
         sys.exit(0)
     if lastversion > thisversion and not force:
-        print _("""\
+        print C_("""\
 Downgrade detected, from version %(hexlversion)s to version %(hextversion)s
 This is probably not safe.
 Exiting.""")
         sys.exit(1)
-    print _('Upgrading from version %(hexlversion)s to %(hextversion)s')
+    print C_('Upgrading from version %(hexlversion)s to %(hextversion)s')
     errors = main()
     if not errors:
         # Record the version we just upgraded to
@@ -804,7 +804,7 @@
         fp.close()
     else:
         lockdir = mm_cfg.LOCK_DIR
-        print _('''\
+        print C_('''\
 
 ERROR:
 
diff -ruN mailman-2.1.12-a/bin/version mailman-2.1.12-b/bin/version
--- mailman-2.1.12-a/bin/version        2009-02-23 22:23:35.000000000 +0100
+++ mailman-2.1.12-b/bin/version        2009-07-28 12:19:54.000000000 +0200
@@ -21,6 +21,6 @@
 
 import paths
 import Mailman.mm_cfg
-from Mailman.i18n import _
+from Mailman.i18n import C_
 
-print _('Using Mailman version:'), Mailman.mm_cfg.VERSION
+print C_('Using Mailman version:'), Mailman.mm_cfg.VERSION
diff -ruN mailman-2.1.12-a/bin/withlist mailman-2.1.12-b/bin/withlist
--- mailman-2.1.12-a/bin/withlist       2009-07-28 12:19:51.000000000 +0200
+++ mailman-2.1.12-b/bin/withlist       2009-07-28 12:19:54.000000000 +0200
@@ -157,7 +157,7 @@
         fd = sys.stderr
     else:
         fd = sys.stdout
-    print >> fd, _(__doc__)
+    print >> fd, C_(__doc__)
     if msg:
         print >> fd, msg
     sys.exit(code)
@@ -175,11 +175,11 @@
     if m.Locked():
         if VERBOSE:
             listname = m.internal_name()
-            print >> sys.stderr, _(
+            print >> sys.stderr, C_(
                 'Unlocking (but not saving) list: %(listname)s')
         m.Unlock()
     if VERBOSE:
-        print >> sys.stderr, _('Finalizing')
+        print >> sys.stderr, C_('Finalizing')
     del m
 
 
@@ -188,16 +188,16 @@
     global m
     # first try to open mailing list
     if VERBOSE:
-        print >> sys.stderr, _('Loading list %(listname)s'),
+        print >> sys.stderr, C_('Loading list %(listname)s'),
         if LOCK:
-            print >> sys.stderr, _('(locked)')
+            print >> sys.stderr, C_('(locked)')
         else:
-            print >> sys.stderr, _('(unlocked)')
+            print >> sys.stderr, C_('(unlocked)')
 
     try:
         m = MailList.MailList(listname, lock=LOCK)
     except Errors.MMUnknownListError:
-        print >> sys.stderr, _('Unknown list: %(listname)s')
+        print >> sys.stderr, C_('Unknown list: %(listname)s')
         m = None
 
     # try to import the module and run the callable
@@ -237,7 +237,7 @@
             all = True
 
     if len(args) < 1 and not all:
-        warning = _('No list name supplied.')
+        warning = C_('No list name supplied.')
         if interact:
             # Let them keep going
             print warning
@@ -246,7 +246,7 @@
             usage(1, warning)
 
     if all and not run:
-        usage(1, _('--all requires --run'))
+        usage(1, C_('--all requires --run'))
 
     # The default for interact is 1 unless -r was given
     if interact is None:
@@ -266,11 +266,11 @@
             module = run[:i]
             callable = run[i+1:]
         if VERBOSE:
-            print >> sys.stderr, _('Importing %(module)s...')
+            print >> sys.stderr, C_('Importing %(module)s...')
         __import__(module)
         mod = sys.modules[module]
         if VERBOSE:
-            print >> sys.stderr, _('Running %(module)s.%(callable)s()...')
+            print >> sys.stderr, C_('Running %(module)s.%(callable)s()...')
         func = getattr(mod, callable)
 
     if all:
@@ -291,7 +291,7 @@
         namespace = globals().copy()
         namespace.update(locals())
         if dolist:
-            ban = _("The variable `m' is the %(listname)s MailList instance")
+            ban = C_("The variable `m' is the %(listname)s MailList instance")
         else:
             ban = None
         code.InteractiveConsole(namespace).interact(ban)
diff -ruN mailman-2.1.12-a/Mailman/i18n.py mailman-2.1.12-b/Mailman/i18n.py
--- mailman-2.1.12-a/Mailman/i18n.py    2009-02-23 22:23:35.000000000 +0100
+++ mailman-2.1.12-b/Mailman/i18n.py    2009-07-28 12:19:54.000000000 +0200
@@ -15,6 +15,7 @@
 # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
 # USA.
 
+import locale
 import sys
 import time
 import gettext
@@ -26,6 +27,16 @@
 _translation = None
 
 
+def _get_ctype_charset():
+    old = locale.setlocale(locale.LC_CTYPE, '')
+    charset = locale.nl_langinfo(locale.CODESET)
+    locale.setlocale(locale.LC_CTYPE, old)
+    return charset
+
+_ctype_charset = _get_ctype_charset()
+
+
+
 
 def set_language(language=None):
     global _translation
@@ -54,7 +65,7 @@
 
 
 
-def _(s):
+def _(s, frame = 1):
     if s == '':
         return s
     assert s
@@ -70,7 +81,7 @@
     # original string is 1) locals dictionary, 2) globals dictionary.
     #
     # First, get the frame of the caller
-    frame = sys._getframe(1)
+    frame = sys._getframe(frame)
     # A `safe' dictionary is used so we won't get an exception if there's a
     # missing key in the dictionary.
     dict = SafeDict(frame.f_globals.copy())
@@ -88,6 +99,21 @@
         if isinstance(v, UnicodeType):
             dict[k] = v.encode(charset, 'replace')
     return tns % dict
+    
+    
+def tolocale(s):
+    global _ctype_charset
+    if isinstance(s, UnicodeType):
+        return s
+    source = _translation.charset ()
+    if not source:
+        return s
+    return unicode(s, source, 'replace').encode(_ctype_charset, 'replace')
+
+def C_(s):
+    return tolocale(_(s, 2))
+    
+
 
 
 
diff -ruN mailman-2.1.12-a/Mailman/MTA/Postfix.py mailman-2.1.12-b/Mailman/MTA/Postfix.py
--- mailman-2.1.12-a/Mailman/MTA/Postfix.py     2009-07-28 12:19:50.000000000 +0200
+++ mailman-2.1.12-b/Mailman/MTA/Postfix.py     2009-07-28 12:19:54.000000000 +0200
@@ -27,7 +27,7 @@
 from Mailman import mm_cfg
 from Mailman import Utils
 from Mailman import LockFile
-from Mailman.i18n import _
+from Mailman.i18n import C_
 from Mailman.MTA.Utils import makealiases
 from Mailman.Logging.Syslog import syslog
 
@@ -308,7 +308,7 @@
     targetmode = S_IFREG | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP
     for file in ALIASFILE, VIRTFILE:
         if state.VERBOSE:
-            print _('checking permissions on %(file)s')
+            print C_('checking permissions on %(file)s')
         stat = None
         try:
             stat = os.stat(file)
@@ -318,9 +318,9 @@
         if stat and (stat[ST_MODE] & targetmode) <> targetmode:
             state.ERRORS += 1
             octmode = oct(stat[ST_MODE])
-            print _('%(file)s permissions must be 066x (got %(octmode)s)'),
+            print C_('%(file)s permissions must be 066x (got %(octmode)s)'),
             if state.FIX:
-                print _('(fixing)')
+                print C_('(fixing)')
                 os.chmod(file, stat[ST_MODE] | targetmode)
             else:
                 print
@@ -336,7 +336,7 @@
                 raise
             continue
         if state.VERBOSE:
-            print _('checking ownership of %(dbfile)s')
+            print C_('checking ownership of %(dbfile)s')
         user = mm_cfg.MAILMAN_USER
         ownerok = stat[ST_UID] == pwd.getpwnam(user)[2]
         if not ownerok:
@@ -344,10 +344,10 @@
                 owner = pwd.getpwuid(stat[ST_UID])[0]
             except KeyError:
                 owner = 'uid %d' % stat[ST_UID]
-            print _('%(dbfile)s owned by %(owner)s (must be owned by %(user)s'),
+            print C_('%(dbfile)s owned by %(owner)s (must be owned by %(user)s'),
             state.ERRORS += 1
             if state.FIX:
-                print _('(fixing)')
+                print C_('(fixing)')
                 uid = pwd.getpwnam(user)[2]
                 gid = grp.getgrnam(mm_cfg.MAILMAN_GROUP)[2]
                 os.chown(dbfile, uid, gid)