diff -ruN smeserver-automysqlbackup-3.0.RC6.old/createlinks smeserver-automysqlbackup-3.0.RC6/createlinks
--- smeserver-automysqlbackup-3.0.RC6.old/createlinks	2018-07-06 11:54:05.456758697 +0200
+++ smeserver-automysqlbackup-3.0.RC6/createlinks	2018-07-09 14:13:37.532047394 +0200
@@ -6,11 +6,21 @@
 # links to add
 
 # templates to expand
-for my $event (qw(
-bootstrap-console-save
-console-save
-automysqlbackup-update
-))
+
+foreach (qw(
+    /etc/cron.d/runmysqlbackup
+    /etc/automysqlbackup/myserver.conf
+    /etc/automysqlbackup/mysql55.conf
+    /etc/automysqlbackup/mysql57.conf
+    /etc/automysqlbackup/mymaria.conf
+
+    ))
 {
-    	templates2events( "/etc/cron.d/runmysqlbackup" , $event );
+    templates2events(
+        "$_", qw(
+            automysqlbackup-update
+            console-save
+            bootstrap-console-save
+            )
+    );
 }
diff -ruN smeserver-automysqlbackup-3.0.RC6.old/root/etc/automysqlbackup/myserver.conf smeserver-automysqlbackup-3.0.RC6/root/etc/automysqlbackup/myserver.conf
--- smeserver-automysqlbackup-3.0.RC6.old/root/etc/automysqlbackup/myserver.conf	2018-07-06 11:54:05.432757518 +0200
+++ smeserver-automysqlbackup-3.0.RC6/root/etc/automysqlbackup/myserver.conf	1970-01-01 01:00:00.000000000 +0100
@@ -1,261 +0,0 @@
-#version=3.0_rc2
-# DONT'T REMOVE THE PREVIOUS VERSION LINE!
-#
-# Uncomment to change the default values (shown after =)
-# WARNING:
-# This is not true for UMASK, CONFIG_prebackup and CONFIG_postbackup!!!
-#
-# Default values are stored in the script itself. Declarations in
-# /etc/automysqlbackup/automysqlbackup.conf will overwrite them. The
-# declarations in here will supersede all other.
-
-# Edit $PATH if mysql and mysqldump are not located in /usr/local/bin:/usr/bin:/bin:/usr/local/mysql/bin
-#PATH=${PATH}:FULL_PATH_TO_YOUR_DIR_CONTAINING_MYSQL:FULL_PATH_TO_YOUR_DIR_CONTAINING_MYSQLDUMP
-
-# Basic Settings
-
-# Username to access the MySQL server e.g. dbuser
-CONFIG_mysql_dump_username='backupuser'
-
-# Password to access the MySQL server e.g. password
-CONFIG_mysql_dump_password=$PWDMYSQL
-
-# Host name (or IP address) of MySQL server e.g localhost
-#CONFIG_mysql_dump_host='localhost'
-
-# "Friendly" host name of MySQL server to be used in email log
-# if unset or empty (default) will use CONFIG_mysql_dump_host instead
-CONFIG_mysql_dump_host_friendly=$SYSTEMNAME
-
-# Backup directory location e.g /backups
-CONFIG_backup_dir=$BACKUPDIR
-
-# This is practically a moot point, since there is a fallback to the compression
-# functions without multicore support in the case that the multicore versions aren't
-# present in the system. Of course, if you have the latter installed, but don't want
-# to use them, just choose no here.
-# pigz -> gzip
-# pbzip2 -> bzip2
-#CONFIG_multicore='yes'
-
-# Number of threads (= occupied cores) you want to use. You should - for the sake
-# of the stability of your system - not choose more than (#number of cores - 1).
-# Especially if the script is run in background by cron and the rest of your system
-# has already heavy load, setting this too high, might crash your system. Assuming
-# all systems have at least some sort of HyperThreading, the default is 2 threads.
-# If you wish to let pigz and pbzip2 autodetect or use their standards, set it to
-# 'auto'.
-#CONFIG_multicore_threads=2
-
-# Databases to backup
-
-# List of databases for Daily/Weekly Backup e.g. ( 'DB1' 'DB2' 'DB3' ... )
-# set to (), i.e. empty, if you want to backup all databases
-#CONFIG_db_names=()
-# You can use
-#declare -a MDBNAMES=( "${DBNAMES[@]}" 'added entry1' 'added entry2' ... )
-# INSTEAD to copy the contents of $DBNAMES and add further entries (optional).
-
-# List of databases for Monthly Backups.
-# set to (), i.e. empty, if you want to backup all databases
-#CONFIG_db_month_names=()
-
-# List of DBNAMES to EXLUCDE if DBNAMES is empty, i.e. ().
-#CONFIG_db_exclude=( 'information_schema' )
-
-# List of tables to exclude, in the form db_name.table_name
-# You may use wildcards for the table names, i.e. 'mydb.a*' selects all tables starting with an 'a'.
-# However we only offer the wildcard '*', matching everything that could appear, which translates to the
-# '%' wildcard in mysql.
-#CONFIG_table_exclude=()
-
-
-# Advanced Settings
-
-# Rotation Settings
-
-# Which day do you want monthly backups? (01 to 31)
-# If the chosen day is greater than the last day of the month, it will be done
-# on the last day of the month.
-# Set to 0 to disable monthly backups.
-#CONFIG_do_monthly="01"
-
-# Which day do you want weekly backups? (1 to 7 where 1 is Monday)
-# Set to 0 to disable weekly backups.
-#CONFIG_do_weekly="5"
-
-# Set rotation of daily backups. VALUE*24hours
-# If you want to keep only today's backups, you could choose 1, i.e. everything older than 24hours will be removed.
-#CONFIG_rotation_daily=6
-
-# Set rotation for weekly backups. VALUE*24hours
-#CONFIG_rotation_weekly=35
-
-# Set rotation for monthly backups. VALUE*24hours
-#CONFIG_rotation_monthly=150
-
-
-# Server Connection Settings
-
-# Set the port for the mysql connection
-#CONFIG_mysql_dump_port=3306
-
-# Compress communications between backup server and MySQL server?
-#CONFIG_mysql_dump_commcomp='no'
-
-# Use ssl encryption with mysqldump?
-#CONFIG_mysql_dump_usessl='yes'
-
-# For connections to localhost. Sometimes the Unix socket file must be specified.
-#CONFIG_mysql_dump_socket=''
-
-# The maximum size of the buffer for client/server communication. e.g. 16MB (maximum is 1GB)
-#CONFIG_mysql_dump_max_allowed_packet=''
-
-# This option sends a START TRANSACTION SQL statement to the server before dumping data. It is useful only with
-# transactional tables such as InnoDB, because then it dumps the consistent state of the database at the time
-# when BEGIN was issued without blocking any applications.
-#
-# When using this option, you should keep in mind that only InnoDB tables are dumped in a consistent state. For
-# example, any MyISAM or MEMORY tables dumped while using this option may still change state.
-#
-# While a --single-transaction dump is in process, to ensure a valid dump file (correct table contents and
-# binary log coordinates), no other connection should use the following statements: ALTER TABLE, CREATE TABLE,
-# DROP TABLE, RENAME TABLE, TRUNCATE TABLE. A consistent read is not isolated from those statements, so use of
-# them on a table to be dumped can cause the SELECT that is performed by mysqldump to retrieve the table
-# contents to obtain incorrect contents or fail.
-#CONFIG_mysql_dump_single_transaction='no'
-
-# http://dev.mysql.com/doc/refman/5.0/en/mysqldump.html#option_mysqldump_master-data
-# --master-data[=value] 
-# Use this option to dump a master replication server to produce a dump file that can be used to set up another
-# server as a slave of the master. It causes the dump output to include a CHANGE MASTER TO statement that indicates
-# the binary log coordinates (file name and position) of the dumped server. These are the master server coordinates
-# from which the slave should start replicating after you load the dump file into the slave.
-#
-# If the option value is 2, the CHANGE MASTER TO statement is written as an SQL comment, and thus is informative only;
-# it has no effect when the dump file is reloaded. If the option value is 1, the statement is not written as a comment
-# and takes effect when the dump file is reloaded. If no option value is specified, the default value is 1.
-#
-# This option requires the RELOAD privilege and the binary log must be enabled. 
-#
-# The --master-data option automatically turns off --lock-tables. It also turns on --lock-all-tables, unless
-# --single-transaction also is specified, in which case, a global read lock is acquired only for a short time at the
-# beginning of the dump (see the description for --single-transaction). In all cases, any action on logs happens at
-# the exact moment of the dump.
-# ==================================================================================================================
-# possible values are 1 and 2, which correspond with the values from mysqldump
-# VARIABLE=    , i.e. no value, turns it off (default)
-#
-#CONFIG_mysql_dump_master_data=
-
-# Included stored routines (procedures and functions) for the dumped databases in the output. Use of this option
-# requires the SELECT privilege for the mysql.proc table. The output generated by using --routines contains
-# CREATE PROCEDURE and CREATE FUNCTION statements to re-create the routines. However, these statements do not
-# include attributes such as the routine creation and modification timestamps. This means that when the routines
-# are reloaded, they will be created with the timestamps equal to the reload time.
-#
-# If you require routines to be re-created with their original timestamp attributes, do not use --routines. Instead,
-# dump and reload the contents of the mysql.proc table directly, using a MySQL account that has appropriate privileges
-# for the mysql database. 
-#
-# This option was added in MySQL 5.0.13. Before that, stored routines are not dumped. Routine DEFINER values are not
-# dumped until MySQL 5.0.20. This means that before 5.0.20, when routines are reloaded, they will be created with the
-# definer set to the reloading user. If you require routines to be re-created with their original definer, dump and
-# load the contents of the mysql.proc table directly as described earlier.
-#
-#CONFIG_mysql_dump_full_schema='yes'
-
-# Backup status of table(s) in textfile. This is very helpful when restoring backups, since it gives an idea, what changed
-# in the meantime.
-#CONFIG_mysql_dump_dbstatus='yes'
-
-# Backup dump settings
-
-# Include CREATE DATABASE in backup?
-#CONFIG_mysql_dump_create_database='no'
-
-# Separate backup directory and file for each DB? (yes or no)
-#CONFIG_mysql_dump_use_separate_dirs='yes'
-
-# Choose Compression type. (gzip or bzip2)
-#CONFIG_mysql_dump_compression='gzip'
-
-# Store an additional copy of the latest backup to a standard
-# location so it can be downloaded by third party scripts.
-#CONFIG_mysql_dump_latest='no'
-
-# Remove all date and time information from the filenames in the latest folder.
-# Runs, if activated, once after the backups are completed. Practically it just finds all files in the latest folder
-# and removes the date and time information from the filenames (if present).
-#CONFIG_mysql_dump_latest_clean_filenames='no'
-
-# Create differential backups. Master backups are created weekly at #$CONFIG_do_weekly weekday. Between master backups,
-# diff is used to create differential backups relative to the latest master backup. In the Manifest file, you find the
-# following structure
-# $filename 	md5sum	$md5sum	diff_id	$diff_id	rel_id	$rel_id
-# where each field is separated by the tabular character '\t'. The entries with $ at the beginning mean the actual values,
-# while the others are just for readability. The diff_id is the id of the differential or master backup which is also in
-# the filename after the last _ and before the suffixes begin, i.e. .diff, .sql and extensions. It is used to relate
-# differential backups to master backups. The master backups have 0 as $rel_id and are thereby identifiable. Differential
-# backups have the id of the corresponding master backup as $rel_id.
-#
-# To ensure that master backups are kept long enough, the value of $CONFIG_rotation_daily is set to a minimum of 21 days.
-#
-#CONFIG_mysql_dump_differential='no'
-
-
-# Notification setup
-
-# What would you like to be mailed to you?
-# - log   : send only log file
-# - files : send log file and sql files as attachments (see docs)
-# - stdout : will simply output the log to the screen if run manually.
-# - quiet : Only send logs if an error occurs to the MAILADDR.
-CONFIG_mailcontent=$MAILCONTENT
-
-# Set the maximum allowed email size in k. (4000 = approx 5MB email [see docs])
-CONFIG_mail_maxattsize=$SIZEMAIL
-
-# Allow packing of files with tar and splitting it in pieces of CONFIG_mail_maxattsize.
-CONFIG_mail_splitandtar='yes'
-
-# Use uuencode instead of mutt. WARNING: Not all email clients work well with uuencoded attachments.
-#CONFIG_mail_use_uuencoded_attachments='no'
-
-# Email Address to send mail to? (user@domain.com)
-CONFIG_mail_address=$MAILTO
-
-
-# Encryption
-
-# Do you wish to encrypt your backups using openssl?
-CONFIG_encrypt=$ENCRYPT
-
-# Choose a password to encrypt the backups.
-CONFIG_encrypt_password=$DBENCRYPT_PASSWORD
-
-# Other
-
-# Backup local files, i.e. maybe you would like to backup your my.cnf (mysql server configuration), etc.
-# These files will be tar'ed, depending on your compression option CONFIG_mysql_dump_compression compressed and
-# depending on the option CONFIG_encrypt encrypted.
-#
-# Note: This could also have been accomplished with CONFIG_prebackup or CONFIG_postbackup.
-CONFIG_backup_local_files=($BACKUP_LOCAL_FILES)
-
-# Command to run before backups (uncomment to use)
-#CONFIG_prebackup="/etc/mysql-backup-pre"
-
-# Command run after backups (uncomment to use)
-#CONFIG_postbackup="/etc/mysql-backup-post"
-
-# Uncomment to activate! This will give folders rwx------
-# and files rw------- permissions.
-umask 0077
-
-# dry-run, i.e. show what you are gonna do without actually doing it
-# inactive: =0 or commented out
-# active: uncommented AND =1
-#CONFIG_dryrun=1
-
diff -ruN smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/db/configuration/defaults/automysqlbackup/Mymaria smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/db/configuration/defaults/automysqlbackup/Mymaria
--- smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/db/configuration/defaults/automysqlbackup/Mymaria	1970-01-01 01:00:00.000000000 +0100
+++ smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/db/configuration/defaults/automysqlbackup/Mymaria	2018-07-09 14:13:37.532047394 +0200
@@ -0,0 +1 @@
+disabled
\ No newline at end of file
diff -ruN smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/db/configuration/defaults/automysqlbackup/Mysql53 smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/db/configuration/defaults/automysqlbackup/Mysql53
--- smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/db/configuration/defaults/automysqlbackup/Mysql53	1970-01-01 01:00:00.000000000 +0100
+++ smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/db/configuration/defaults/automysqlbackup/Mysql53	2018-07-09 14:13:37.532047394 +0200
@@ -0,0 +1 @@
+enabled
\ No newline at end of file
diff -ruN smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/db/configuration/defaults/automysqlbackup/Mysql55 smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/db/configuration/defaults/automysqlbackup/Mysql55
--- smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/db/configuration/defaults/automysqlbackup/Mysql55	1970-01-01 01:00:00.000000000 +0100
+++ smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/db/configuration/defaults/automysqlbackup/Mysql55	2018-07-09 14:13:37.533047443 +0200
@@ -0,0 +1 @@
+disabled
\ No newline at end of file
diff -ruN smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/db/configuration/defaults/automysqlbackup/Mysql57 smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/db/configuration/defaults/automysqlbackup/Mysql57
--- smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/db/configuration/defaults/automysqlbackup/Mysql57	1970-01-01 01:00:00.000000000 +0100
+++ smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/db/configuration/defaults/automysqlbackup/Mysql57	2018-07-09 14:13:37.533047443 +0200
@@ -0,0 +1 @@
+disabled
\ No newline at end of file
diff -ruN smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/automysqlbackup/mymaria.conf/10start smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/automysqlbackup/mymaria.conf/10start
--- smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/automysqlbackup/mymaria.conf/10start	1970-01-01 01:00:00.000000000 +0100
+++ smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/automysqlbackup/mymaria.conf/10start	2018-07-09 14:13:37.542047887 +0200
@@ -0,0 +1,18 @@
+{
+my $mymaria = ${'mariadb55-mysqld'}{'status'} || 'disabled';
+my $myauto = ${'automysqlbackup'}{'Mymaria'} || 'disabled';
+if ($mymaria eq 'enabled' &&  $myauto eq 'enabled') {
+$OUT .= <<'_EOF';
+#version=3.0_rc2
+# DONT'T REMOVE THE PREVIOUS VERSION LINE!
+CONFIG_mysql_dump_username='backupuser'
+CONFIG_mysql_dump_password=$PWDMYSQL
+CONFIG_mysql_dump_host_friendly=$SYSTEMNAME
+_EOF
+}
+else {
+$OUT .= "#version=3.0_rc2\n";
+$OUT .= "# DONT'T REMOVE THE PREVIOUS VERSION LINE!\n";
+$OUT .= "# Automysqlbackup disabled\n";
+}
+}
\ No newline at end of file
diff -ruN smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/automysqlbackup/mymaria.conf/20db smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/automysqlbackup/mymaria.conf/20db
--- smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/automysqlbackup/mymaria.conf/20db	1970-01-01 01:00:00.000000000 +0100
+++ smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/automysqlbackup/mymaria.conf/20db	2018-07-09 14:13:37.543047937 +0200
@@ -0,0 +1,14 @@
+{
+my $mymaria = ${'mariadb55-mysqld'}{'status'} || 'disabled';
+my $myauto = ${'automysqlbackup'}{'Mymaria'} || 'disabled';
+if ($mymaria eq 'enabled' &&  $myauto eq 'enabled') {
+$OUT .= <<'_EOF';
+# DB Specific
+CONFIG_backup_dir=${BACKUPDIR}_mymaria
+CONFIG_mysql_dump_full_schema='no'
+CONFIG_db_exclude=( 'performance_schema' 'sys' )
+CONFIG_mysql_dump_socket='/var/lib/mysql/mariadb55.sock'
+# End
+_EOF
+}
+}
\ No newline at end of file
diff -ruN smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/automysqlbackup/mymaria.conf/30end smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/automysqlbackup/mymaria.conf/30end
--- smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/automysqlbackup/mymaria.conf/30end	1970-01-01 01:00:00.000000000 +0100
+++ smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/automysqlbackup/mymaria.conf/30end	2018-07-09 14:13:37.556048573 +0200
@@ -0,0 +1,16 @@
+{
+my $mymaria = ${'mariadb55-mysqld'}{'status'} || 'disabled';
+my $myauto = ${'automysqlbackup'}{'Mymaria'} || 'disabled';
+if ($mymaria eq 'enabled' &&  $myauto eq 'enabled') {
+$OUT .= <<'_EOF';
+CONFIG_mailcontent=$MAILCONTENT
+CONFIG_mail_maxattsize=$SIZEMAIL
+CONFIG_mail_splitandtar='yes'
+CONFIG_mail_address=$MAILTO
+CONFIG_encrypt=$ENCRYPT
+CONFIG_encrypt_password=$DBENCRYPT_PASSWORD
+CONFIG_backup_local_files=($BACKUP_LOCAL_FILES)
+umask 0077
+_EOF
+}
+}
\ No newline at end of file
diff -ruN smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/automysqlbackup/myserver.conf/10start smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/automysqlbackup/myserver.conf/10start
--- smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/automysqlbackup/myserver.conf/10start	1970-01-01 01:00:00.000000000 +0100
+++ smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/automysqlbackup/myserver.conf/10start	2018-07-09 14:13:37.556048573 +0200
@@ -0,0 +1,19 @@
+{
+my $my53 = ${'mysqld'}{'status'} || 'disabled';
+my $myauto = ${'automysqlbackup'}{'Mysql53'} || 'disabled';
+if ($my53 eq 'enabled' &&  $myauto eq 'enabled') {
+$OUT .= <<'_EOF';
+#version=3.0_rc2
+# DONT'T REMOVE THE PREVIOUS VERSION LINE!
+CONFIG_mysql_dump_username='backupuser'
+CONFIG_mysql_dump_password=$PWDMYSQL
+CONFIG_mysql_dump_host_friendly=$SYSTEMNAME
+CONFIG_backup_dir=$BACKUPDIR
+_EOF
+}
+else {
+$OUT .= "#version=3.0_rc2\n";
+$OUT .= "# DONT'T REMOVE THE PREVIOUS VERSION LINE!\n";
+$OUT .= "# Automysqlbackup disabled\n";
+}
+}
\ No newline at end of file
diff -ruN smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/automysqlbackup/myserver.conf/20db smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/automysqlbackup/myserver.conf/20db
--- smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/automysqlbackup/myserver.conf/20db	1970-01-01 01:00:00.000000000 +0100
+++ smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/automysqlbackup/myserver.conf/20db	2018-07-09 14:13:37.558048680 +0200
@@ -0,0 +1,7 @@
+{
+my $my53 = ${'mysqld'}{'status'} || 'disabled';
+my $myauto = ${'automysqlbackup'}{'Mysql53'} || 'disabled';
+if ($my53 eq 'enabled' &&  $myauto eq 'enabled') {
+$OUT .= "CONFIG_mysql_dump_socket='/var/lib/mysql/mysql.sock'\n";
+}
+}
\ No newline at end of file
diff -ruN smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/automysqlbackup/myserver.conf/30end smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/automysqlbackup/myserver.conf/30end
--- smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/automysqlbackup/myserver.conf/30end	1970-01-01 01:00:00.000000000 +0100
+++ smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/automysqlbackup/myserver.conf/30end	2018-07-09 14:13:37.558048680 +0200
@@ -0,0 +1,16 @@
+{
+my $my53 = ${'mysqld'}{'status'} || 'disabled';
+my $myauto = ${'automysqlbackup'}{'Mysql53'} || 'disabled';
+if ($my53 eq 'enabled' &&  $myauto eq 'enabled') {
+$OUT .= <<'_EOF';
+CONFIG_mailcontent=$MAILCONTENT
+CONFIG_mail_maxattsize=$SIZEMAIL
+CONFIG_mail_splitandtar='yes'
+CONFIG_mail_address=$MAILTO
+CONFIG_encrypt=$ENCRYPT
+CONFIG_encrypt_password=$DBENCRYPT_PASSWORD
+CONFIG_backup_local_files=($BACKUP_LOCAL_FILES)
+umask 0077
+_EOF
+}
+}
\ No newline at end of file
diff -ruN smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/automysqlbackup/mysql55.conf/10start smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/automysqlbackup/mysql55.conf/10start
--- smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/automysqlbackup/mysql55.conf/10start	1970-01-01 01:00:00.000000000 +0100
+++ smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/automysqlbackup/mysql55.conf/10start	2018-07-09 14:13:37.559048732 +0200
@@ -0,0 +1,18 @@
+{
+my $my55 = ${'mysql55-mysqld'}{'status'} || 'disabled';
+my $myauto = ${'automysqlbackup'}{'Mysql55'} || 'disabled';
+if ($my55 eq 'enabled' &&  $myauto eq 'enabled') {
+$OUT .= <<'_EOF';
+#version=3.0_rc2
+# DONT'T REMOVE THE PREVIOUS VERSION LINE!
+CONFIG_mysql_dump_username='backupuser'
+CONFIG_mysql_dump_password=$PWDMYSQL
+CONFIG_mysql_dump_host_friendly=$SYSTEMNAME
+_EOF
+}
+else {
+$OUT .= "#version=3.0_rc2\n";
+$OUT .= "# DONT'T REMOVE THE PREVIOUS VERSION LINE!\n";
+$OUT .= "# Automysqlbackup disabled\n";
+}
+}
\ No newline at end of file
diff -ruN smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/automysqlbackup/mysql55.conf/20db smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/automysqlbackup/mysql55.conf/20db
--- smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/automysqlbackup/mysql55.conf/20db	1970-01-01 01:00:00.000000000 +0100
+++ smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/automysqlbackup/mysql55.conf/20db	2018-07-09 14:13:37.559048732 +0200
@@ -0,0 +1,14 @@
+{
+my $my55 = ${'mysql55-mysqld'}{'status'} || 'disabled';
+my $myauto = ${'automysqlbackup'}{'Mysql55'} || 'disabled';
+if ($my55 eq 'enabled' &&  $myauto eq 'enabled') {
+$OUT .= <<'_EOF';
+# DB Specific
+CONFIG_backup_dir=${BACKUPDIR}_mysql55
+CONFIG_mysql_dump_full_schema='no'
+CONFIG_db_exclude=( 'information_schema' 'performance_schema' 'sys' )
+CONFIG_mysql_dump_socket='/var/lib/mysql/mysql55.sock'
+# End
+_EOF
+}
+}
\ No newline at end of file
diff -ruN smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/automysqlbackup/mysql55.conf/30end smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/automysqlbackup/mysql55.conf/30end
--- smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/automysqlbackup/mysql55.conf/30end	1970-01-01 01:00:00.000000000 +0100
+++ smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/automysqlbackup/mysql55.conf/30end	2018-07-09 14:13:37.560048781 +0200
@@ -0,0 +1,16 @@
+{
+my $my55 = ${'mysql55-mysqld'}{'status'} || 'disabled';
+my $myauto = ${'automysqlbackup'}{'Mysql55'} || 'disabled';
+if ($my55 eq 'enabled' &&  $myauto eq 'enabled') {
+$OUT .= <<'_EOF';
+CONFIG_mailcontent=$MAILCONTENT
+CONFIG_mail_maxattsize=$SIZEMAIL
+CONFIG_mail_splitandtar='yes'
+CONFIG_mail_address=$MAILTO
+CONFIG_encrypt=$ENCRYPT
+CONFIG_encrypt_password=$DBENCRYPT_PASSWORD
+CONFIG_backup_local_files=($BACKUP_LOCAL_FILES)
+umask 0077
+_EOF
+}
+}
\ No newline at end of file
diff -ruN smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/automysqlbackup/mysql57.conf/10start smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/automysqlbackup/mysql57.conf/10start
--- smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/automysqlbackup/mysql57.conf/10start	1970-01-01 01:00:00.000000000 +0100
+++ smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/automysqlbackup/mysql57.conf/10start	2018-07-09 14:13:37.561048828 +0200
@@ -0,0 +1,18 @@
+{
+my $my57 = ${'mysql57-mysqld'}{'status'} || 'disabled';
+my $myauto = ${'automysqlbackup'}{'Mysql57'} || 'disabled';
+if ($my57 eq 'enabled' &&  $myauto eq 'enabled') {
+$OUT .= <<'_EOF';
+#version=3.0_rc2
+# DONT'T REMOVE THE PREVIOUS VERSION LINE!
+CONFIG_mysql_dump_username='backupuser'
+CONFIG_mysql_dump_password=$PWDMYSQL
+CONFIG_mysql_dump_host_friendly=$SYSTEMNAME
+_EOF
+}
+else {
+$OUT .= "#version=3.0_rc2\n";
+$OUT .= "# DONT'T REMOVE THE PREVIOUS VERSION LINE!\n";
+$OUT .= "# Automysqlbackup disabled\n";
+}
+}
\ No newline at end of file
diff -ruN smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/automysqlbackup/mysql57.conf/20db smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/automysqlbackup/mysql57.conf/20db
--- smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/automysqlbackup/mysql57.conf/20db	1970-01-01 01:00:00.000000000 +0100
+++ smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/automysqlbackup/mysql57.conf/20db	2018-07-09 14:13:37.561048828 +0200
@@ -0,0 +1,14 @@
+{
+my $my57 = ${'mysql57-mysqld'}{'status'} || 'disabled';
+my $myauto = ${'automysqlbackup'}{'Mysql57'} || 'disabled';
+if ($my57 eq 'enabled' &&  $myauto eq 'enabled') {
+$OUT .= <<'_EOF';
+# DB Specific
+CONFIG_backup_dir=${BACKUPDIR}_mysql57
+CONFIG_mysql_dump_full_schema='no'
+CONFIG_db_exclude=( 'performance_schema' 'sys' )
+CONFIG_mysql_dump_socket='/var/lib/mysql/mysql57.sock'
+# End
+_EOF
+}
+}
\ No newline at end of file
diff -ruN smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/automysqlbackup/mysql57.conf/30end smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/automysqlbackup/mysql57.conf/30end
--- smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/automysqlbackup/mysql57.conf/30end	1970-01-01 01:00:00.000000000 +0100
+++ smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/automysqlbackup/mysql57.conf/30end	2018-07-09 14:13:37.573049415 +0200
@@ -0,0 +1,16 @@
+{
+my $my57 = ${'mysql57-mysqld'}{'status'} || 'disabled';
+my $myauto = ${'automysqlbackup'}{'Mysql57'} || 'disabled';
+if ($my57 eq 'enabled' &&  $myauto eq 'enabled') {
+$OUT .= <<'_EOF';
+CONFIG_mailcontent=$MAILCONTENT
+CONFIG_mail_maxattsize=$SIZEMAIL
+CONFIG_mail_splitandtar='yes'
+CONFIG_mail_address=$MAILTO
+CONFIG_encrypt=$ENCRYPT
+CONFIG_encrypt_password=$DBENCRYPT_PASSWORD
+CONFIG_backup_local_files=($BACKUP_LOCAL_FILES)
+umask 0077
+_EOF
+}
+}
\ No newline at end of file
diff -ruN smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/cron.d/runmysqlbackup/10base smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/cron.d/runmysqlbackup/10base
--- smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/cron.d/runmysqlbackup/10base	2018-07-06 11:54:05.456758697 +0200
+++ smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/cron.d/runmysqlbackup/10base	2018-07-09 14:13:37.582049862 +0200
@@ -1 +1,9 @@
-{${'automysqlbackup'}{'Minute'}||'1'} {${'automysqlbackup'}{'Hour'}||'3'} * * * root /sbin/e-smith/runmysqlbackup
+{
+my $my53 = ${'mysqld'}{'status'} || 'disabled';
+
+return '' unless $my53 eq 'enabled';
+my $minutes= ${'automysqlbackup'}{'Minute'}||'1';
+my $hours= ${'automysqlbackup'}{'Hour'}||'3';
+$OUT = "$minutes $hours * * * root /sbin/e-smith/runmysqlbackup /etc/automysqlbackup/myserver.conf > /dev/null\n";
+
+}
\ No newline at end of file
diff -ruN smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/cron.d/runmysqlbackup/20mysql55 smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/cron.d/runmysqlbackup/20mysql55
--- smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/cron.d/runmysqlbackup/20mysql55	1970-01-01 01:00:00.000000000 +0100
+++ smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/cron.d/runmysqlbackup/20mysql55	2018-07-09 14:13:37.583049912 +0200
@@ -0,0 +1,9 @@
+{
+my $my55 = ${'mysql55-mysqld'}{'status'} || 'disabled';
+
+return '' unless $my55 eq 'enabled';
+my $minutes= ${'automysqlbackup'}{'Minute'}||'1';
+my $hours= ${'automysqlbackup'}{'Hour'}||'3';
+$OUT = "$minutes $hours * * * root /sbin/e-smith/runmysqlbackup /etc/automysqlbackup/mysql55.conf > /dev/null\n";
+
+}
\ No newline at end of file
diff -ruN smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/cron.d/runmysqlbackup/21mysql57 smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/cron.d/runmysqlbackup/21mysql57
--- smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/cron.d/runmysqlbackup/21mysql57	1970-01-01 01:00:00.000000000 +0100
+++ smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/cron.d/runmysqlbackup/21mysql57	2018-07-09 14:13:37.583049912 +0200
@@ -0,0 +1,9 @@
+{
+my $my57 = ${'mysql57-mysqld'}{'status'} || 'disabled';
+
+return '' unless $my57 eq 'enabled';
+my $minutes= ${'automysqlbackup'}{'Minute'}||'1';
+my $hours= ${'automysqlbackup'}{'Hour'}||'3';
+$OUT = "$minutes $hours * * * root /sbin/e-smith/runmysqlbackup /etc/automysqlbackup/mysql57.conf > /dev/null\n";
+
+}
\ No newline at end of file
diff -ruN smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/cron.d/runmysqlbackup/22mymaria smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/cron.d/runmysqlbackup/22mymaria
--- smeserver-automysqlbackup-3.0.RC6.old/root/etc/e-smith/templates/etc/cron.d/runmysqlbackup/22mymaria	1970-01-01 01:00:00.000000000 +0100
+++ smeserver-automysqlbackup-3.0.RC6/root/etc/e-smith/templates/etc/cron.d/runmysqlbackup/22mymaria	2018-07-09 14:13:37.584049962 +0200
@@ -0,0 +1,9 @@
+{
+my $mymaria = ${'mariadb55-mysqld'}{'status'} || 'disabled';
+
+return '' unless $mymaria eq 'enabled';
+my $minutes= ${'automysqlbackup'}{'Minute'}||'1';
+my $hours= ${'automysqlbackup'}{'Hour'}||'3';
+$OUT = "$minutes $hours * * * root /sbin/e-smith/runmysqlbackup /etc/automysqlbackup/mymaria.conf > /dev/null\n";
+
+}
\ No newline at end of file
diff -ruN smeserver-automysqlbackup-3.0.RC6.old/root/sbin/e-smith/runmysqlbackup smeserver-automysqlbackup-3.0.RC6/root/sbin/e-smith/runmysqlbackup
--- smeserver-automysqlbackup-3.0.RC6.old/root/sbin/e-smith/runmysqlbackup	2018-07-06 11:54:05.456758697 +0200
+++ smeserver-automysqlbackup-3.0.RC6/root/sbin/e-smith/runmysqlbackup	2018-07-09 14:13:37.584049962 +0200
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-/usr/local/bin/automysqlbackup /etc/automysqlbackup/myserver.conf >/dev/null
+/usr/local/bin/automysqlbackup >/dev/null
 
 chown root:root /root/backup/db* -R
 find /root/backup/db* -type f -exec chmod 400 {} \;