smeserver-coova-chilli/contribs7/smeserver-coova-chilli-0.1-authTemplate.patch

diff -Nur -x '*.orig' -x '*.rej' smeserver-coova-chilli-0.1/root/etc/e-smith/templates/etc/raddb/radiusd.conf/70authenticate25AuthUnix mezzanine_patched_smeserver-coova-chilli-0.1/root/etc/e-smith/templates/etc/raddb/radiusd.conf/70authenticate25AuthUnix
--- smeserver-coova-chilli-0.1/root/etc/e-smith/templates/etc/raddb/radiusd.conf/70authenticate25AuthUnix       1970-01-01 01:00:00.000000000 +0100
+++ mezzanine_patched_smeserver-coova-chilli-0.1/root/etc/e-smith/templates/etc/raddb/radiusd.conf/70authenticate25AuthUnix     2008-08-28 09:30:19.000000000 +0200
@@ -0,0 +1,5 @@
+{
+    push(@authModules, "\tunix\n");
+    $OUT = '';
+}
+
diff -Nur -x '*.orig' -x '*.rej' smeserver-coova-chilli-0.1/root/etc/e-smith/templates-custom/etc/raddb/radiusd.conf/70authenticate mezzanine_patched_smeserver-coova-chilli-0.1/root/etc/e-smith/templates-custom/etc/raddb/radiusd.conf/70authenticate
--- smeserver-coova-chilli-0.1/root/etc/e-smith/templates-custom/etc/raddb/radiusd.conf/70authenticate  2008-04-05 01:49:01.000000000 +0200
+++ mezzanine_patched_smeserver-coova-chilli-0.1/root/etc/e-smith/templates-custom/etc/raddb/radiusd.conf/70authenticate        1970-01-01 01:00:00.000000000 +0100
@@ -1,31 +0,0 @@
-{
-#  Authentication.
-#
-#  This section lists which modules are available for authentication.
-#  Note that it does NOT mean 'try each module in order'.  It means
-#  that a module from the 'authorize' section adds a configuration
-#  attribute 'Auth-Type := FOO'.  That authentication type is then
-#  used to pick the apropriate module from the list below.
-#
-#  In general, you SHOULD NOT set the Auth-Type attribute.  The server
-#  will figure it out on its own, and will do the right thing.  The
-#  most common side effect of erroneously setting the Auth-Type
-#  attribute is that one authentication method will work, but the
-#  others will not.
-#
-#  The common reasons to set the Auth-Type attribute by hand
-#  is to either forcibly reject the user, or forcibly accept him.
-}
-authenticate \{
-{
-        #  MSCHAP authentication.
-}       Auth-Type MS-CHAP \{
-                mschap
-        \}
-{
-        #  Allow EAP authentication.
-}       eap
-        # Allow Unix Auth
-        unix
-\}
-
1	diff -Nur -x '.orig' -x '.rej' smeserver-coova-chilli-0.1/root/etc/e-smith/templates/etc/raddb/radiusd.conf/70authenticate25AuthUnix mezzanine_patched_smeserver-coova-chilli-0.1/root/etc/e-smith/templates/etc/raddb/radiusd.conf/70authenticate25AuthUnix
2	--- smeserver-coova-chilli-0.1/root/etc/e-smith/templates/etc/raddb/radiusd.conf/70authenticate25AuthUnix 1970-01-01 01:00:00.000000000 +0100
3	+++ mezzanine_patched_smeserver-coova-chilli-0.1/root/etc/e-smith/templates/etc/raddb/radiusd.conf/70authenticate25AuthUnix 2008-08-28 09:30:19.000000000 +0200
4	@@ -0,0 +1,5 @@
5	+{
6	+ push(@authModules, "\tunix\n");
7	+ $OUT = '';
8	+}
9	+
10	diff -Nur -x '.orig' -x '.rej' smeserver-coova-chilli-0.1/root/etc/e-smith/templates-custom/etc/raddb/radiusd.conf/70authenticate mezzanine_patched_smeserver-coova-chilli-0.1/root/etc/e-smith/templates-custom/etc/raddb/radiusd.conf/70authenticate
11	--- smeserver-coova-chilli-0.1/root/etc/e-smith/templates-custom/etc/raddb/radiusd.conf/70authenticate 2008-04-05 01:49:01.000000000 +0200
12	+++ mezzanine_patched_smeserver-coova-chilli-0.1/root/etc/e-smith/templates-custom/etc/raddb/radiusd.conf/70authenticate 1970-01-01 01:00:00.000000000 +0100
13	@@ -1,31 +0,0 @@
14	-{
15	-# Authentication.
16	-#
17	-# This section lists which modules are available for authentication.
18	-# Note that it does NOT mean 'try each module in order'. It means
19	-# that a module from the 'authorize' section adds a configuration
20	-# attribute 'Auth-Type := FOO'. That authentication type is then
21	-# used to pick the apropriate module from the list below.
22	-#
23	-# In general, you SHOULD NOT set the Auth-Type attribute. The server
24	-# will figure it out on its own, and will do the right thing. The
25	-# most common side effect of erroneously setting the Auth-Type
26	-# attribute is that one authentication method will work, but the
27	-# others will not.
28	-#
29	-# The common reasons to set the Auth-Type attribute by hand
30	-# is to either forcibly reject the user, or forcibly accept him.
31	-}
32	-authenticate \{
33	-{
34	- # MSCHAP authentication.
35	-} Auth-Type MS-CHAP \{
36	- mschap
37	- \}
38	-{
39	- # Allow EAP authentication.
40	-} eap
41	- # Allow Unix Auth
42	- unix
43	-\}
44	-