diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/010header smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/010header
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/010header	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/010header	2016-05-26 03:19:40.604000000 -0400
@@ -0,0 +1,11 @@
+# DansGuardian config file for version 2.10.1.1
+
+# **NOTE** as of version 2.7.5 most of the list files are now in dansguardianf1.conf
+{
+    use esmith::config;
+    use esmith::db;
+    our %conf;
+    tie %conf, 'esmith::config';
+    our %dungog;
+    tie %dungog, 'esmith::config', '/home/e-smith/db/dungog';
+}
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/015reportinglevel smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/015reportinglevel
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/015reportinglevel	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/015reportinglevel	2016-05-26 03:47:07.122000000 -0400
@@ -0,0 +1,12 @@
+# Web Access Denied Reporting (does not affect logging)
+#
+# -1 = log, but do not block - Stealth mode
+#  0 = just say 'Access Denied'
+#  1 = report why but not what denied phrase
+#  2 = report fully
+#  3 = use HTML template file (accessdeniedaddress ignored) - recommended
+#
+{
+    my $reportinglevel  = db_get_prop(\%dungog, 'dansguardian', "reportinglevel") || '1';
+    $OUT = "reportinglevel = $reportinglevel\n";
+}
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/020languagedir smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/020languagedir
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/020languagedir	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/020languagedir	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,9 @@
+# Language dir where languages are stored for internationalisation.
+# The HTML template within this dir is only used when reportinglevel
+# is set to 3. When used, DansGuardian will display the HTML file instead of
+# using the perl cgi script.  This option is faster, cleaner
+# and easier to customise the access denied page.
+# The language file is used no matter what setting however.
+#
+languagedir = '/usr/share/dansguardian/languages'
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/025language smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/025language
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/025language	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/025language	2016-05-26 04:21:50.518000000 -0400
@@ -0,0 +1,11 @@
+# language to use from languagedir.
+language = 'ukenglish'
+{
+    my $language  = db_get_prop(\%dungog, 'dansguardian', "language") || 'ukenglish';
+    $OUT = "language = '$language'\n";
+    if (-e "/etc/dansguardian/languages/$language/templatef0.html")
+    {
+      $OUT .= "htmltemplate = templatef0.html\n";
+    }
+}
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/030loggingsettings smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/030loggingsettings
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/030loggingsettings	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/030loggingsettings	2016-05-26 04:16:59.629000000 -0400
@@ -0,0 +1,55 @@
+# Logging Settings
+#
+# 0 = none  1 = just denied  2 = all text based  3 = all requests
+{
+    my $loglevel  = db_get_prop(\%dungog, 'dansguardian', "loglevel") || '2';
+    $OUT = "loglevel = $loglevel\n";
+}
+
+# Log Exception Hits
+# Log if an exception (user, ip, URL, phrase) is matched and so
+# the page gets let through.  Can be useful for diagnosing
+# why a site gets through the filter.
+# 0 = never log exceptions
+# 1 = log exceptions, but do not explicitly mark them as such
+# 2 = always log & mark exceptions (default)
+logexceptionhits = 2
+
+# Log File Format
+# 1 = DansGuardian format (space delimited)
+# 2 = CSV-style format
+# 3 = Squid Log File Format
+# 4 = Tab delimited
+{
+    my $logfileformat  = db_get_prop(\%dungog, 'dansguardian', "logfileformat") || '3';
+    $OUT = "logfileformat = $logfileformat\n";
+}
+
+# truncate large items in log lines
+#maxlogitemlength = 400
+
+# anonymize logs (blank out usernames & IPs)
+#anonymizelogs = on
+
+
+# Syslog logging
+#
+# Use syslog for access logging instead of logging to the file
+# at the defined or built-in "loglocation"
+#syslog = on
+
+# Log file location
+# 
+# Defines the log directory and filename.
+#loglocation = '/var/log/dansguardian/access.log'
+
+
+# Statistics log file location
+#
+# Defines the stat file directory and filename.
+# Only used in conjunction with maxips > 0
+# Once every 3 minutes, the current number of IPs in the cache, and the most
+# that have been in the cache since the daemon was started, are written to this
+# file. IPs persist in the cache for 7 days.
+#statlocation = '/var/log/dansguardian/stats'
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/035networksettings smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/035networksettings
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/035networksettings	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/035networksettings	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,9 @@
+# Network Settings
+# 
+# the IP that DansGuardian listens on.  If left blank DansGuardian will
+# listen on all IPs.  That would include all NICs, loopback, modem, etc.
+# Normally you would have your firewall protecting this, but if you want
+# you can limit it to a certain IP. To bind to multiple interfaces,
+# specify each IP on an individual filterip line.
+filterip =
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/040listenport smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/040listenport
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/040listenport	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/040listenport	2016-05-26 03:21:16.515000000 -0400
@@ -0,0 +1,6 @@
+# the port that DansGuardian listens to.
+{
+    my $port = db_get_prop(\%dungog, 'dansguardian', 'port') || '8080';
+    $OUT = "filterport = $port\n";
+}
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/045proxyloop smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/045proxyloop
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/045proxyloop	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/045proxyloop	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,6 @@
+# the ip of the proxy (default is the loopback - i.e. this server)
+proxyip = 127.0.0.1
+
+# the port DansGuardian connects to proxy on
+proxyport = 3128
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/050dnscachenote smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/050dnscachenote
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/050dnscachenote	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/050dnscachenote	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,14 @@
+# Whether to retrieve the original destination IP in transparent proxy
+# setups and check it againt the domain pulled from the HTTP headers.
+#
+# Be aware that when visiting sites which use a certain type of round-robin
+# DNS for load balancing, DG may mark requests as invalid unless DG gets
+# exactly the same answers to its DNS requests as clients.  The chances of
+# this happening can be increased if all clients and servers on the same LAN
+# make use of a local, caching DNS server instead of using upstream DNS
+# directly.
+#
+# See http://www.kb.cert.org/vuls/id/435052
+# on (default) | off
+#!! Not compiled !! originalip = on
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/055accessdeniedaddress smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/055accessdeniedaddress
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/055accessdeniedaddress	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/055accessdeniedaddress	2016-05-26 03:26:36.775000000 -0400
@@ -0,0 +1,24 @@
+# accessdeniedaddress is the address of your web server to which the cgi
+# dansguardian reporting script was copied. Only used in reporting levels 1 and 2.
+#
+# This webserver must be either:
+#  1. Non-proxied. Either a machine on the local network, or listed as an exception
+#     in your browser's proxy configuration.
+#  2. Added to the exceptionsitelist. Option 1 is preferable; this option is
+#     only for users using both transparent proxying and a non-local server
+#     to host this script.
+#
+# Individual filter groups can override this setting in their own configuration.
+#
+{
+    my $deniedurl  = db_get_prop(\%dungog, 'dansguardian', "deniedurl") || '';
+    if ($deniedurl ne '')
+    {
+      $OUT = "accessdeniedaddress = 'http://$deniedurl'\n";
+    }
+    else
+    {
+       my $wsn  = db_get_prop(\%dungog, 'dansguardian', "wsn") || ${'DomainName'};
+       $OUT = "accessdeniedaddress = 'http://$wsn/cgi-bin/dansguardian.pl'\n";
+    }
+}
\ No newline at end of file
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/060nonstandarddelimiter smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/060nonstandarddelimiter
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/060nonstandarddelimiter	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/060nonstandarddelimiter	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,9 @@
+# Non standard delimiter (only used with accessdeniedaddress)
+# To help preserve the full banned URL, including parameters, the variables
+# passed into the access denied CGI are separated using non-standard
+# delimiters. This can be useful to ensure correct operation of the filter
+# bypass modes. Parameters are split using "::" in place of "&", and "==" in
+# place of "=".
+# Default is enabled, but to go back to the standard mode, disable it.
+nonstandarddelimiter = on
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/065bannedimagereplace smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/065bannedimagereplace
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/065bannedimagereplace	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/065bannedimagereplace	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,9 @@
+# Banned image replacement
+# Images that are banned due to domain/url/etc reasons including those
+# in the adverts blacklists can be replaced by an image.  This will,
+# for example, hide images from advert sites and remove broken image
+# icons from banned domains.
+# on (default) | off
+usecustombannedimage = on
+custombannedimagefile = '/usr/share/dansguardian/transparent1x1.gif'
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/070filtergroups smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/070filtergroups
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/070filtergroups	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/070filtergroups	2016-05-26 03:28:57.490000000 -0400
@@ -0,0 +1,15 @@
+# Filter groups options
+# filtergroups sets the number of filter groups. A filter group is a set of content
+# filtering options you can apply to a group of users.  The value must be 1 or more.
+# DansGuardian will automatically look for dansguardianfN.conf where N is the filter
+# group.  To assign users to groups use the filtergroupslist option.  All users default
+# to filter group 1.  You must have some sort of authentication to be able to map users
+# to a group.  The more filter groups the more copies of the lists will be in RAM so
+# use as few as possible.
+{
+    #from filtergroupslist/30records template
+    my $fn  = db_get_prop(\%dungog, 'dansguardian', "fn") || '1';
+    $OUT = "filtergroups = $fn\n";
+}
+filtergroupslist = '/etc/dansguardian/lists/filtergroupslist'
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/075authfileloation smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/075authfileloation
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/075authfileloation	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/075authfileloation	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,4 @@
+# Authentication files location
+bannediplist = '/etc/dansguardian/lists/bannediplist'
+exceptioniplist = '/etc/dansguardian/lists/exceptioniplist'
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/080showweightphrase smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/080showweightphrase
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/080showweightphrase	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/080showweightphrase	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,6 @@
+# Show weighted phrases found
+# If enabled then the phrases found that made up the total which excedes
+# the naughtyness limit will be logged and, if the reporting level is
+# high enough, reported. on | off
+showweightedfound = on
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/085weightedphrasemode smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/085weightedphrasemode
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/085weightedphrasemode	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/085weightedphrasemode	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,8 @@
+# Weighted phrase mode
+# There are 3 possible modes of operation:
+# 0 = off = do not use the weighted phrase feature.
+# 1 = on, normal = normal weighted phrase operation.
+# 2 = on, singular = each weighted phrase found only counts once on a page.
+#
+weightedphrasemode = 2
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/090urlcacheage smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/090urlcacheage
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/090urlcacheage	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/090urlcacheage	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,14 @@
+#Positive (clean) result caching for URLs
+# Caches good pages so they don't need to be scanned again.
+# It also works with AV plugins.
+# 0 = off (recommended for ISPs with users with disimilar browsing)
+# 1000 = recommended for most users
+# 5000 = suggested max upper limit
+# If you're using an AV plugin then use at least 5000.
+urlcachenumber = 1000
+#
+# Age before they are stale and should be ignored in seconds
+# 0 = never
+# 900 = recommended = 15 mins
+urlcacheage = 900
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/095scancleancache smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/095scancleancache
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/095scancleancache	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/095scancleancache	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,8 @@
+# Clean cache for content (AV) scan results
+# By default, to save CPU, files scanned and found to be
+# clean are inserted into the clean cache and NOT scanned
+# again for a while.  If you don't like this then choose
+# to disable it.
+# (on|off) default = on.
+scancleancache = on
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/100phrasefiltermode smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/100phrasefiltermode
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/100phrasefiltermode	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/100phrasefiltermode	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,11 @@
+# Smart, Raw and Meta/Title phrase content filtering options
+# Smart is where the multiple spaces and HTML are removed before phrase filtering
+# Raw is where the raw HTML including meta tags are phrase filtered
+# Meta/Title is where only meta and title tags are phrase filtered (v. quick)
+# CPU usage can be effectively halved by using setting 0 or 1 compared to 2
+# 0 = raw only
+# 1 = smart only
+# 2 = both of the above (default)
+# 3 = meta/title
+phrasefiltermode = 2
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/110lowercasing smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/110lowercasing
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/110lowercasing	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/110lowercasing	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,18 @@
+# Lower casing options
+# When a document is scanned the uppercase letters are converted to lower case
+# in order to compare them with the phrases.  However this can break Big5 and
+# other 16-bit texts.  If needed preserve the case.  As of version 2.7.0 accented
+# characters are supported.
+# 0 = force lower case (default)
+# 1 = do not change case
+# 2 = scan first in lower case, then in original case
+preservecase = 0
+
+# Note:
+# If phrasefiltermode and preserve case are both 2, this equates to 4 phrase
+# filtering passes. If you have a large enough userbase for this to be a
+# worry, and need to filter pages in exotic character encodings, it may be
+# better to run two instances on separate servers: one with preservecase 1
+# (and possibly forcequicksearch 1) and non ASCII/UTF-8 phrase lists, and one
+# with preservecase 0 and ASCII/UTF-8 lists.
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/115hexdecoding smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/115hexdecoding
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/115hexdecoding	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/115hexdecoding	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,8 @@
+# Hex decoding options
+# When a document is scanned it can optionally convert %XX to chars.
+# If you find documents are getting past the phrase filtering due to encoding
+# then enable.  However this can break Big5 and other 16-bit texts.
+# off = disabled (default)
+# on = enabled
+hexdecodecontent = off
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/120forcequicksearch smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/120forcequicksearch
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/120forcequicksearch	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/120forcequicksearch	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,8 @@
+# Force Quick Search rather than DFA search algorithm
+# The current DFA implementation is not totally 16-bit character compatible
+# but is used by default as it handles large phrase lists much faster.
+# If you wish to use a large number of 16-bit character phrases then
+# enable this option.
+# off (default) | on (Big5 compatible)
+forcequicksearch = off
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/125reverseaddrlook smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/125reverseaddrlook
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/125reverseaddrlook	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/125reverseaddrlook	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,9 @@
+# Reverse lookups for banned site and URLs.
+# If set to on, DansGuardian will look up the forward DNS for an IP URL
+# address and search for both in the banned site and URL lists.  This would
+# prevent a user from simply entering the IP for a banned address.
+# It will reduce searching speed somewhat so unless you have a local caching
+# DNS server, leave it off and use the Blanket IP Block option in the
+# bannedsitelist file instead.
+reverseaddresslookups = off
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/130reverseaddrip smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/130reverseaddrip
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/130reverseaddrip	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/130reverseaddrip	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,11 @@
+# Reverse lookups for banned and exception IP lists.
+# If set to on, DansGuardian will look up the forward DNS for the IP
+# of the connecting computer.  This means you can put in hostnames in
+# the exceptioniplist and bannediplist.
+# If a client computer is matched against an IP given in the lists, then the
+# IP will be recorded in any log entries; if forward DNS is successful and a
+# match occurs against a hostname, the hostname will be logged instead.
+# It will reduce searching speed somewhat so unless you have a local DNS server, 
+# leave it off.
+reverseclientiplookups = off
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/135logclienthost smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/135logclienthost
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/135logclienthost	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/135logclienthost	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,8 @@
+# Perform reverse lookups on client IPs for successful requests.
+# If set to on, DansGuardian will look up the forward DNS for the IP
+# of the connecting computer, and log host names (where available) rather than
+# IPs against requests.
+# This is not dependent on reverseclientiplookups being enabled; however, if it
+# is, enabling this option does not incur any additional forward DNS requests.
+logclienthostnames = off
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/140bansiteurl smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/140bansiteurl
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/140bansiteurl	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/140bansiteurl	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,8 @@
+# Build bannedsitelist and bannedurllist cache files.
+# This will compare the date stamp of the list file with the date stamp of
+# the cache file and will recreate as needed.
+# If a bsl or bul .processed file exists, then that will be used instead.
+# It will increase process start speed by 300%.  On slow computers this will
+# be significant.  Fast computers do not need this option. on | off
+createlistcachefiles = on
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/145maxupsize smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/145maxupsize
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/145maxupsize	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/145maxupsize	2016-05-26 03:26:08.080000000 -0400
@@ -0,0 +1,14 @@
+# POST protection (web upload and forms)
+# does not block forms without any file upload, i.e. this is just for
+# blocking or limiting uploads
+# measured in kibibytes after MIME encoding and header bumph
+# use 0 for a complete block
+# use higher (e.g. 512 = 512Kbytes) for limiting
+# use -1 for no blocking
+#maxuploadsize = 512
+#maxuploadsize = 0
+{
+    my $maxuploadsize  = db_get_prop(\%dungog, 'dansguardian', "maxuploadsize") || '-1';
+    if ($maxuploadsize eq 'block') {$maxuploadsize = '0';}
+    $OUT = "maxuploadsize = $maxuploadsize\n";
+}
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/150maxcontentfilesize smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/150maxcontentfilesize
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/150maxcontentfilesize	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/150maxcontentfilesize	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,11 @@
+# Max content filter size
+# Sometimes web servers label binary files as text which can be very
+# large which causes a huge drain on memory and cpu resources.
+# To counter this, you can limit the size of the document to be
+# filtered and get it to just pass it straight through.
+# This setting also applies to content regular expression modification.
+# The value must not be higher than maxcontentramcachescansize
+# The size is in Kibibytes - eg 2048 = 2Mb
+# use 0 to set it to maxcontentramcachescansize
+maxcontentfiltersize = 256
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/155maxcontentramcachesize smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/155maxcontentramcachesize
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/155maxcontentramcachesize	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/155maxcontentramcachesize	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,10 @@
+# Max content ram cache scan size
+# This is only used if you use a content scanner plugin such as AV
+# This is the max size of file that DG will download and cache
+# in RAM.  After this limit is reached it will cache to disk
+# This value must be less than or equal to maxcontentfilecachescansize.
+# The size is in Kibibytes - eg 10240 = 10Mb
+# use 0 to set it to maxcontentfilecachescansize
+# This option may be ignored by the configured download manager.
+maxcontentramcachescansize = 2000
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/160maxcontentfilecachescansize smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/160maxcontentfilecachescansize
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/160maxcontentfilecachescansize	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/160maxcontentfilecachescansize	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,8 @@
+# Max content file cache scan size
+# This is only used if you use a content scanner plugin such as AV
+# This is the max size file that DG will download
+# so that it can be scanned or virus checked.
+# This value must be greater or equal to maxcontentramcachescansize.
+# The size is in Kibibytes - eg 10240 = 10Mb
+maxcontentfilecachescansize = 20000
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/165filebigcachedir smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/165filebigcachedir
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/165filebigcachedir	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/165filebigcachedir	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,5 @@
+# File cache dir
+# Where DG will download files to be scanned if too large for the
+# RAM cache.
+filecachedir = '/tmp'
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/170deldowntempl smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/170deldowntempl
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/170deldowntempl	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/170deldowntempl	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,9 @@
+# Delete file cache after user completes download
+# When a file gets save to temp it stays there until it is deleted.
+# You can choose to have the file deleted when the user makes a sucessful
+# download.  This will mean if they click on the link to download from
+# the temp store a second time it will give a 404 error.
+# You should configure something to delete old files in temp to stop it filling up.
+# on|off (defaults to on)
+deletedownloadedtempfiles = on
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/175initialtrickdelay smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/175initialtrickdelay
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/175initialtrickdelay	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/175initialtrickdelay	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,9 @@
+# Initial Trickle delay
+# This is the number of seconds a browser connection is left waiting
+# before first being sent *something* to keep it alive.  The
+# *something* depends on the download manager chosen.
+# Do not choose a value too low or normal web pages will be affected.
+# A value between 20 and 110 would be sensible
+# This may be ignored by the configured download manager.
+initialtrickledelay = 20
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/180trickdelay smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/180trickdelay
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/180trickdelay	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/180trickdelay	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,7 @@
+# Trickle delay
+# This is the number of seconds a browser connection is left waiting
+# before being sent more *something* to keep it alive.  The
+# *something* depends on the download manager chosen.
+# This may be ignored by the configured download manager.
+trickledelay = 10
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/185downloadmang smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/185downloadmang
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/185downloadmang	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/185downloadmang	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,31 @@
+# Download Managers
+# These handle downloads of files to be filtered and scanned.
+# They differ in the method they deal with large downloads.
+# Files usually need to be downloaded 100% before they can be
+# filtered and scanned before being sent on to the browser.
+# Normally the browser can just wait, but with content scanning,
+# for example to AV, the browser may timeout or the user may get
+# confused so the download manager has to do some sort of
+# 'keep alive'.
+#
+# There are various methods possible but not all are included.
+# The author does not have the time to write them all so I have
+# included a plugin systam.  Also, not all methods work with all
+# browsers and clients.  Specifically some fancy methods don't
+# work with software that downloads updates.  To solve this,
+# each plugin can support a regular expression for matching
+# the client's user-agent string, and lists of the mime types
+# and extensions it should manage.
+#
+# Note that these are the matching methods provided by the base plugin
+# code, and individual plugins may override or add to them.
+# See the individual plugin conf files for supported options.
+#
+# The plugins are matched in the order you specify and the last
+# one is forced to match as the default, regardless of user agent
+# and other matching mechanisms.
+#
+downloadmanager = '/etc/dansguardian/downloadmanagers/fancy.conf'
+#downloadmanager = '/etc/dansguardian/downloadmanagers/trickle.conf'
+downloadmanager = '/etc/dansguardian/downloadmanagers/default.conf'
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/190contentscanners smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/190contentscanners
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/190contentscanners	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/190contentscanners	2016-05-26 03:59:22.616000000 -0400
@@ -0,0 +1,29 @@
+# Content Scanners (Also known as AV scanners)
+# These are plugins that scan the content of all files your browser fetches
+# for example to AV scan.  The options are limitless.  Eventually all of
+# DansGuardian will be plugin based.  You can have more than one content
+# scanner. The plugins are run in the order you specify.
+# This is one of the few places you can have multiple options of the same name.
+#
+# Some of the scanner(s) require 3rd party software and libraries eg clamav.
+# See the individual plugin conf file for more options (if any).
+#
+#!! Not compiled !! contentscanner = '/etc/dansguardian/contentscanners/clamav.conf'
+#contentscanner = '/etc/dansguardian/contentscanners/clamdscan.conf'
+#!! Unimplemented !! contentscanner = '/etc/dansguardian/contentscanners/kavav.conf'
+#!! Not compiled !! contentscanner = '/etc/dansguardian/contentscanners/kavdscan.conf'
+#contentscanner = '/etc/dansguardian/contentscanners/icapscan.conf'
+#contentscanner = '/etc/dansguardian/contentscanners/commandlinescan.conf'
+
+{
+    my $contentscanner  = db_get_prop(\%dungog, 'dansguardian', "contentscanner") || '';
+    if ($contentscanner eq 'clamscan')
+    {
+       $OUT = "contentscanner = '/etc/dansguardian/contentscanners/clamdscan.conf'\n";
+    }
+    else
+    {
+	$OUT= "# clamscan disabled "
+    }
+
+}
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/195contentscantimout smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/195contentscantimout
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/195contentscantimout	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/195contentscantimout	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,7 @@
+# Content scanner timeout
+# Some of the content scanners support using a timeout value to stop
+# processing (eg AV scanning) the file if it takes too long.
+# If supported this will be used.
+# The default of 60 seconds is probably reasonable.
+contentscannertimeout = 60
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/200contentscanexceptions smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/200contentscanexceptions
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/200contentscanexceptions	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/200contentscanexceptions	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,8 @@
+# Content scan exceptions
+# If 'on' exception sites, urls, users etc will be scanned
+# This is probably not desirable behavour as exceptions are
+# supposed to be trusted and will increase load.
+# Correct use of grey lists are a better idea.
+# (on|off) default = off
+contentscanexceptions = off
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/205authplugins smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/205authplugins
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/205authplugins	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/205authplugins	2016-05-26 03:38:41.514000000 -0400
@@ -0,0 +1,29 @@
+# Auth plugins
+# These replace the usernameidmethod* options in previous versions. They
+# handle the extraction of client usernames from various sources, such as
+# Proxy-Authorisation headers and ident servers, enabling requests to be
+# handled according to the settings of the user's filter group.
+# Multiple plugins can be specified, and will be queried in order until one
+# of them either finds a username or throws an error. For example, if Squid
+# is configured with both NTLM and Basic auth enabled, and both the 'proxy-basic'
+# and 'proxy-ntlm' auth plugins are enabled here, then clients which do not support
+# NTLM can fall back to Basic without sacrificing access rights.
+#
+# If you do not use multiple filter groups, you need not specify this option.
+#
+#authplugin = '/etc/dansguardian/authplugins/proxy-basic.conf'
+#authplugin = '/etc/dansguardian/authplugins/proxy-digest.conf'
+#authplugin = '/etc/dansguardian/authplugins/proxy-ntlm.conf'
+#authplugin = '/etc/dansguardian/authplugins/ident.conf'
+#authplugin = '/etc/dansguardian/authplugins/ip.conf'
+{
+    my $proxyaccess  = db_get_prop(\%conf, 'squid', "RequireAuth") || '';
+    if ($proxyaccess eq 'ident')
+    {
+       $OUT = "authplugin = '/etc/dansguardian/authplugins/ident.conf'\n";
+    }
+    elsif ($proxyaccess =~ /(ncsa|pam|ldap)/)
+    {
+      $OUT = "authplugin = '/etc/dansguardian/authplugins/proxy-basic.conf'\n";
+    }
+}
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/20local smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/20local
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/20local	2008-10-20 11:44:27.000000000 -0400
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/20local	1969-12-31 19:00:00.000000000 -0500
@@ -1,66 +0,0 @@
-###---------- LOCAL DansGuardian's  settings   ----------###
-
-{
-    use esmith::config;
-    use esmith::db;
-
-    my %conf;
-    tie %conf, 'esmith::config';
-
-    my %dungog;
-    tie %dungog, 'esmith::config', '/home/e-smith/db/dungog';
-
-    $OUT = '';
-
-    my $port = db_get_prop(\%dungog, 'dansguardian', 'port') || '8080';
-    $OUT .= "filterport = $port\n";
-
-    #Individual filter groups can override this setting in their own configuration.
-    my $deniedurl  = db_get_prop(\%dungog, 'dansguardian', "deniedurl") || '';
-    if ($deniedurl ne '')
-    {
-       $OUT .= "accessdeniedaddress = 'http://$deniedurl'\n";
-    }
-    else
-    {
-        my $wsn  = db_get_prop(\%dungog, 'dansguardian', "wsn") || ${'DomainName'};
-        $OUT .= "accessdeniedaddress = 'http://$wsn/cgi-bin/dansguardian.pl'\n";
-    }
-
-    my $maxuploadsize  = db_get_prop(\%dungog, 'dansguardian', "maxuploadsize") || '-1';
-    if ($maxuploadsize eq 'block') {$maxuploadsize = '0';}
-    $OUT .= "maxuploadsize = $maxuploadsize\n";
-
-    #from filtergroupslist/30records template
-    my $fn  = db_get_prop(\%dungog, 'dansguardian', "fn") || '1';
-    $OUT .= "filtergroups = $fn\n";
-
-    my $loglevel  = db_get_prop(\%dungog, 'dansguardian', "loglevel") || '0';
-    $OUT .= "loglevel = $loglevel\n";
-
-    my $logfileformat  = db_get_prop(\%dungog, 'dansguardian', "logfileformat") || '1';
-    $OUT .= "logfileformat = $logfileformat\n";
-
-    my $language  = db_get_prop(\%dungog, 'dansguardian', "language") || 'ukenglish';
-    $OUT .= "language = $language\n";
-
-    if (-e "/etc/dansguardian/languages/$language/templatef0.html")
-    {
-      $OUT .= "htmltemplate = templatef0.html\n";
-    }
-
-    my $proxyaccess  = db_get_prop(\%conf, 'squid', "RequireAuth") || '';
-    if ($proxyaccess eq 'ident')
-    {
-       $OUT .= "authplugin = '/etc/dansguardian/authplugins/ident.conf'\n";
-    }
-    elsif ($proxyaccess =~ /(ncsa|pam|ldap)/)
-    {
-       $OUT .= "authplugin = '/etc/dansguardian/authplugins/proxy-basic.conf'\n";
-    }
-}
-reportinglevel = 1
-maxlogitemlength = 300
-contentscanner = '/etc/dansguardian/contentscanners/clamdscan.conf'
-
-###---------- Default DansGuardian's settings   ----------###
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/210recheckreplacedurls smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/210recheckreplacedurls
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/210recheckreplacedurls	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/210recheckreplacedurls	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,11 @@
+# Re-check replaced URLs
+# As a matter of course, URLs undergo regular expression search/replace (urlregexplist)
+# *after* checking the exception site/URL/regexpURL lists, but *before* checking against
+# the banned site/URL lists, allowing certain requests that would be matched against the
+# latter in their original state to effectively be converted into grey requests.
+# With this option enabled, the exception site/URL/regexpURL lists are also re-checked
+# after replacement, making it possible for URL replacement to trigger exceptions based
+# on them.
+# Defaults to off.
+recheckreplacedurls = off
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/215forwardmisc smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/215forwardmisc
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/215forwardmisc	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/215forwardmisc	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,7 @@
+# Misc settings
+
+# if on it adds an X-Forwarded-For: <clientip> to the HTTP request
+# header.  This may help solve some problem sites that need to know the
+# source ip. on | off
+forwardedfor = off
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/220xforwardmisc smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/220xforwardmisc
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/220xforwardmisc	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/220xforwardmisc	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,5 @@
+# if on it uses the X-Forwarded-For: <clientip> to determine the client
+# IP. This is for when you have squid between the clients and DansGuardian.
+# Warning - headers are easily spoofed. on | off
+usexforwardedfor = off
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/225logconnectionmisc smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/225logconnectionmisc
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/225logconnectionmisc	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/225logconnectionmisc	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,5 @@
+# if on it logs some debug info regarding fork()ing and accept()ing which
+# can usually be ignored.  These are logged by syslog.  It is safe to leave
+# it on or off
+logconnectionhandlingerrors = on
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/230logchildprocesshandle smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/230logchildprocesshandle
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/230logchildprocesshandle	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/230logchildprocesshandle	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,8 @@
+# Fork pool options
+
+# If on, this causes DG to write to the log file whenever child processes are
+# created or destroyed (other than by crashes). This information can help in
+# understanding and tuning the following parameters, but is not generally
+# useful in production.
+logchildprocesshandling = off
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/235maxchild smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/235maxchild
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/235maxchild	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/235maxchild	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,5 @@
+# sets the maximum number of processes to spawn to handle the incoming
+# connections.  Max value usually 250 depending on OS.
+# On large sites you might want to try 180.
+maxchildren = 120
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/240minchild smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/240minchild
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/240minchild	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/240minchild	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,4 @@
+# sets the minimum number of processes to spawn to handle the incoming connections.
+# On large sites you might want to try 32.
+minchildren = 8
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/245minsparechild smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/245minsparechild
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/245minsparechild	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/245minsparechild	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,4 @@
+# sets the minimum number of processes to be kept ready to handle connections.
+# On large sites you might want to try 8.
+minsparechildren = 4
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/250preforkchild smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/250preforkchild
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/250preforkchild	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/250preforkchild	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,4 @@
+# sets the minimum number of processes to spawn when it runs out
+# On large sites you might want to try 10.
+preforkchildren = 6
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/255maxsparechild smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/255maxsparechild
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/255maxsparechild	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/255maxsparechild	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,5 @@
+# sets the maximum number of processes to have doing nothing.
+# When this many are spare it will cull some of them.
+# On large sites you might want to try 64.
+maxsparechildren = 32
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/260maxagechild smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/260maxagechild
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/260maxagechild	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/260maxagechild	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,5 @@
+# sets the maximum age of a child process before it croaks it.
+# This is the number of connections they handle before exiting.
+# On large sites you might want to try 10000.
+maxagechildren = 500
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/265maxips smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/265maxips
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/265maxips	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/265maxips	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,5 @@
+# Sets the maximum number client IP addresses allowed to connect at once.
+# Use this to set a hard limit on the number of users allowed to concurrently
+# browse the web. Set to 0 for no limit, and to disable the IP cache process.
+maxips = 0
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/270processoptions smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/270processoptions
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/270processoptions	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/270processoptions	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,22 @@
+# Process options
+# (Change these only if you really know what you are doing).
+# These options allow you to run multiple instances of DansGuardian on a single machine.
+# Remember to edit the log file path above also if that is your intention.
+
+# IPC filename
+# 
+# Defines IPC server directory and filename used to communicate with the log process.
+ipcfilename = '/tmp/.dguardianipc'
+
+# URL list IPC filename
+# 
+# Defines URL list IPC server directory and filename used to communicate with the URL
+# cache process.
+urlipcfilename = '/tmp/.dguardianurlipc'
+
+# IP list IPC filename
+#
+# Defines IP list IPC server directory and filename, for communicating with the client
+# IP cache process.
+ipipcfilename = '/tmp/.dguardianipipc'
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/275pidfilename smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/275pidfilename
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/275pidfilename	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/275pidfilename	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,5 @@
+# PID filename
+# 
+# Defines process id directory and filename.
+#pidfilename = '/var/run/dansguardian.pid'
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/280disabledaemon smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/280disabledaemon
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/280disabledaemon	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/280disabledaemon	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,6 @@
+# Disable daemoning
+# If enabled the process will not fork into the background.
+# It is not usually advantageous to do this.
+# on|off (defaults to off)
+nodaemon = off
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/285disablelog smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/285disablelog
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/285disablelog	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/285disablelog	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,4 @@
+# Disable logging process
+# on|off (defaults to off)
+nologger = off
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/290logadblocks smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/290logadblocks
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/290logadblocks	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/290logadblocks	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,4 @@
+# Enable logging of "ADs" category blocks
+# on|off (defaults to off)
+logadblocks = off
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/295loguseragent smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/295loguseragent
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/295loguseragent	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/295loguseragent	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,5 @@
+# Enable logging of client User-Agent
+# Some browsers will cause a *lot* of extra information on each line!
+# on|off (defaults to off)
+loguseragent = off
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/300daemonrunasusergroup smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/300daemonrunasusergroup
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/300daemonrunasusergroup	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/300daemonrunasusergroup	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,9 @@
+# Daemon runas user and group
+# This is the user that DansGuardian runs as.  Normally the user/group nobody.
+# Uncomment to use.  Defaults to the user set at compile time.
+# Temp files created during virus scanning are given owner and group read
+# permissions; to use content scanners based on external processes, such as
+# clamdscan, the two processes must run with either the same group or user ID.
+#daemonuser = 'dansguardian'
+#daemongroup = 'dansguardian'
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/305softrestart smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/305softrestart
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/305softrestart	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/305softrestart	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,6 @@
+# Soft restart
+# When on this disables the forced killing off all processes in the process group.
+# This is not to be confused with the -g run time option - they are not related.
+# on|off (defaults to off)
+softrestart = off
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/310mailer smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/310mailer
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/310mailer	1969-12-31 19:00:00.000000000 -0500
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/310mailer	2016-05-25 13:14:48.000000000 -0400
@@ -0,0 +1,5 @@
+# Mail program
+# Path (sendmail-compatible) email program, with options.
+# Not used if usesmtp is disabled (filtergroup specific).
+mailer = '/usr/sbin/sendmail -t'
+
diff -Nur smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/40distro smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/40distro
--- smeserver-dansguardian-panel-2.11-old/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/40distro	2007-10-29 10:14:12.000000000 -0400
+++ smeserver-dansguardian-panel-2.11/root/etc/e-smith/templates/etc/dansguardian/dansguardian.conf/40distro	1969-12-31 19:00:00.000000000 -0500
@@ -1,609 +0,0 @@
-# DansGuardian config file for version 2.9.9.1,
-
-# **NOTE** as of version 2.7.5 most of the list files are now in dansguardianf1.conf
-
-
-# Web Access Denied Reporting (does not affect logging)
-#
-# -1 = log, but do not block - Stealth mode
-#  0 = just say 'Access Denied'
-#  1 = report why but not what denied phrase
-#  2 = report fully
-#  3 = use HTML template file (accessdeniedaddress ignored) - recommended
-#
-reportinglevel = 3
-
-# Language dir where languages are stored for internationalisation.
-# The HTML template within this dir is only used when reportinglevel
-# is set to 3. When used, DansGuardian will display the HTML file instead of
-# using the perl cgi script.  This option is faster, cleaner
-# and easier to customise the access denied page.
-# The language file is used no matter what setting however.
-#
-languagedir = '/etc/dansguardian/languages'
-
-# language to use from languagedir.
-language = 'ukenglish'
-
-# Logging Settings
-#
-# 0 = none  1 = just denied  2 = all text based  3 = all requests
-loglevel = 2
-
-# Log Exception Hits
-# Log if an exception (user, ip, URL, phrase) is matched and so
-# the page gets let through.  Can be useful for diagnosing
-# why a site gets through the filter.
-# 0 = never log exceptions
-# 1 = log exceptions, but do not explicitly mark them as such
-# 2 = always log & mark exceptions (default)
-logexceptionhits = 2
-
-# Log File Format
-# 1 = DansGuardian format (space delimited)
-# 2 = CSV-style format
-# 3 = Squid Log File Format
-# 4 = Tab delimited
-logfileformat = 1
-
-# truncate large items in log lines
-#maxlogitemlength = 400
-
-# anonymize logs (blank out usernames & IPs)
-#anonymizelogs = on
-
-
-# Syslog logging
-#
-# Use syslog for access logging instead of logging to the file
-# at the defined or built-in "loglocation"
-#syslog = on
-
-# Log file location
-# 
-# Defines the log directory and filename.
-#loglocation = '/var/log/dansguardian/access.log'
-
-
-# Statistics log file location
-#
-# Defines the stat file directory and filename.
-# Only used in conjunction with maxips > 0
-# Once every 3 minutes, the current number of IPs in the cache, and the most
-# that have been in the cache since the daemon was started, are written to this
-# file. IPs persist in the cache for 7 days.
-#statlocation = '/var/log/dansguardian/stats'
-
-
-# Network Settings
-# 
-# the IP that DansGuardian listens on.  If left blank DansGuardian will
-# listen on all IPs.  That would include all NICs, loopback, modem, etc.
-# Normally you would have your firewall protecting this, but if you want
-# you can limit it to a certain IP. To bind to multiple interfaces,
-# specify each IP on an individual filterip line.
-filterip =
-
-# the port that DansGuardian listens to.
-filterport = 8080
-
-# the ip of the proxy (default is the loopback - i.e. this server)
-proxyip = 127.0.0.1
-
-# the port DansGuardian connects to proxy on
-proxyport = 3128
-
-# accessdeniedaddress is the address of your web server to which the cgi
-# dansguardian reporting script was copied. Only used in reporting levels 1 and 2.
-#
-# This webserver must be either:
-#  1. Non-proxied. Either a machine on the local network, or listed as an exception
-#     in your browser's proxy configuration.
-#  2. Added to the exceptionsitelist. Option 1 is preferable; this option is
-#     only for users using both transparent proxying and a non-local server
-#     to host this script.
-#
-# Individual filter groups can override this setting in their own configuration.
-#
-accessdeniedaddress = 'http://YOURSERVER.YOURDOMAIN/cgi-bin/dansguardian.pl'
-
-# Non standard delimiter (only used with accessdeniedaddress)
-# To help preserve the full banned URL, including parameters, the variables
-# passed into the access denied CGI are separated using non-standard
-# delimiters. This can be useful to ensure correct operation of the filter
-# bypass modes. Parameters are split using "::" in place of "&", and "==" in
-# place of "=".
-# Default is enabled, but to go back to the standard mode, disable it.
-nonstandarddelimiter = on
-
-
-
-# Banned image replacement
-# Images that are banned due to domain/url/etc reasons including those
-# in the adverts blacklists can be replaced by an image.  This will,
-# for example, hide images from advert sites and remove broken image
-# icons from banned domains.
-# on (default) | off
-usecustombannedimage = on
-custombannedimagefile = '/etc/dansguardian/transparent1x1.gif'
-
-
-
-# Filter groups options
-# filtergroups sets the number of filter groups. A filter group is a set of content
-# filtering options you can apply to a group of users.  The value must be 1 or more.
-# DansGuardian will automatically look for dansguardianfN.conf where N is the filter
-# group.  To assign users to groups use the filtergroupslist option.  All users default
-# to filter group 1.  You must have some sort of authentication to be able to map users
-# to a group.  The more filter groups the more copies of the lists will be in RAM so
-# use as few as possible.
-filtergroups = 1
-filtergroupslist = '/etc/dansguardian/lists/filtergroupslist'
-
-
-
-# Authentication files location
-bannediplist = '/etc/dansguardian/lists/bannediplist'
-exceptioniplist = '/etc/dansguardian/lists/exceptioniplist'
-
-
-
-# Show weighted phrases found
-# If enabled then the phrases found that made up the total which excedes
-# the naughtyness limit will be logged and, if the reporting level is
-# high enough, reported. on | off
-showweightedfound = on
-
-# Weighted phrase mode
-# There are 3 possible modes of operation:
-# 0 = off = do not use the weighted phrase feature.
-# 1 = on, normal = normal weighted phrase operation.
-# 2 = on, singular = each weighted phrase found only counts once on a page.
-#
-weightedphrasemode = 2
-
-
-
-# Positive (clean) result caching for URLs
-# Caches good pages so they don't need to be scanned again.
-# It also works with AV plugins.
-# 0 = off (recommended for ISPs with users with disimilar browsing)
-# 1000 = recommended for most users
-# 5000 = suggested max upper limit
-# If you're using an AV plugin then use at least 5000.
-urlcachenumber = 1000
-#
-# Age before they are stale and should be ignored in seconds
-# 0 = never
-# 900 = recommended = 15 mins
-urlcacheage = 900
-
-
-
-# Clean cache for content (AV) scan results
-# By default, to save CPU, files scanned and found to be
-# clean are inserted into the clean cache and NOT scanned
-# again for a while.  If you don't like this then choose
-# to disable it.
-# (on|off) default = on.
-scancleancache = on
-
-
-
-# Smart, Raw and Meta/Title phrase content filtering options
-# Smart is where the multiple spaces and HTML are removed before phrase filtering
-# Raw is where the raw HTML including meta tags are phrase filtered
-# Meta/Title is where only meta and title tags are phrase filtered (v. quick)
-# CPU usage can be effectively halved by using setting 0 or 1 compared to 2
-# 0 = raw only
-# 1 = smart only
-# 2 = both of the above (default)
-# 3 = meta/title
-phrasefiltermode = 2
-
-# Lower casing options
-# When a document is scanned the uppercase letters are converted to lower case
-# in order to compare them with the phrases.  However this can break Big5 and
-# other 16-bit texts.  If needed preserve the case.  As of version 2.7.0 accented
-# characters are supported.
-# 0 = force lower case (default)
-# 1 = do not change case
-# 2 = scan first in lower case, then in original case
-preservecase = 0
-
-# Note:
-# If phrasefiltermode and preserve case are both 2, this equates to 4 phrase
-# filtering passes. If you have a large enough userbase for this to be a
-# worry, and need to filter pages in exotic character encodings, it may be
-# better to run two instances on separate servers: one with preservecase 1
-# (and possibly forcequicksearch 1) and non ASCII/UTF-8 phrase lists, and one
-# with preservecase 0 and ASCII/UTF-8 lists.
-
-
-
-# Hex decoding options
-# When a document is scanned it can optionally convert %XX to chars.
-# If you find documents are getting past the phrase filtering due to encoding
-# then enable.  However this can break Big5 and other 16-bit texts.
-# off = disabled (default)
-# on = enabled
-hexdecodecontent = off
-
-
-
-# Force Quick Search rather than DFA search algorithm
-# The current DFA implementation is not totally 16-bit character compatible
-# but is used by default as it handles large phrase lists much faster.
-# If you wish to use a large number of 16-bit character phrases then
-# enable this option.
-# off (default) | on (Big5 compatible)
-forcequicksearch = off
-
-
-
-# Reverse lookups for banned site and URLs.
-# If set to on, DansGuardian will look up the forward DNS for an IP URL
-# address and search for both in the banned site and URL lists.  This would
-# prevent a user from simply entering the IP for a banned address.
-# It will reduce searching speed somewhat so unless you have a local caching
-# DNS server, leave it off and use the Blanket IP Block option in the
-# bannedsitelist file instead.
-reverseaddresslookups = off
-
-
-
-# Reverse lookups for banned and exception IP lists.
-# If set to on, DansGuardian will look up the forward DNS for the IP
-# of the connecting computer.  This means you can put in hostnames in
-# the exceptioniplist and bannediplist.
-# If a client computer is matched against an IP given in the lists, then the
-# IP will be recorded in any log entries; if forward DNS is successful and a
-# match occurs against a hostname, the hostname will be logged instead.
-# It will reduce searching speed somewhat so unless you have a local DNS server, 
-# leave it off.
-reverseclientiplookups = off
-
-
-# Perform reverse lookups on client IPs for successful requests.
-# If set to on, DansGuardian will look up the forward DNS for the IP
-# of the connecting computer, and log host names (where available) rather than
-# IPs against requests.
-# This is not dependent on reverseclientiplookups being enabled; however, if it
-# is, enabling this option does not incur any additional forward DNS requests.
-logclienthostnames = off
-
-
-# Build bannedsitelist and bannedurllist cache files.
-# This will compare the date stamp of the list file with the date stamp of
-# the cache file and will recreate as needed.
-# If a bsl or bul .processed file exists, then that will be used instead.
-# It will increase process start speed by 300%.  On slow computers this will
-# be significant.  Fast computers do not need this option. on | off
-createlistcachefiles = on
-
-
-
-# POST protection (web upload and forms)
-# does not block forms without any file upload, i.e. this is just for
-# blocking or limiting uploads
-# measured in kibibytes after MIME encoding and header bumph
-# use 0 for a complete block
-# use higher (e.g. 512 = 512Kbytes) for limiting
-# use -1 for no blocking
-#maxuploadsize = 512
-#maxuploadsize = 0
-maxuploadsize = -1
-
-
-
-# Max content filter size
-# Sometimes web servers label binary files as text which can be very
-# large which causes a huge drain on memory and cpu resources.
-# To counter this, you can limit the size of the document to be
-# filtered and get it to just pass it straight through.
-# This setting also applies to content regular expression modification.
-# The value must not be higher than maxcontentramcachescansize
-# The size is in Kibibytes - eg 2048 = 2Mb
-# use 0 to set it to maxcontentramcachescansize
-maxcontentfiltersize = 256
-
-
-
-# Max content ram cache scan size
-# This is only used if you use a content scanner plugin such as AV
-# This is the max size of file that DG will download and cache
-# in RAM.  After this limit is reached it will cache to disk
-# This value must be less than or equal to maxcontentfilecachescansize.
-# The size is in Kibibytes - eg 10240 = 10Mb
-# use 0 to set it to maxcontentfilecachescansize
-# This option may be ignored by the configured download manager.
-maxcontentramcachescansize = 2000
-
-
-
-# Max content file cache scan size
-# This is only used if you use a content scanner plugin such as AV
-# This is the max size file that DG will download
-# so that it can be scanned or virus checked.
-# This value must be greater or equal to maxcontentramcachescansize.
-# The size is in Kibibytes - eg 10240 = 10Mb
-maxcontentfilecachescansize = 20000
-
-
-
-# File cache dir
-# Where DG will download files to be scanned if too large for the
-# RAM cache.
-filecachedir = '/tmp'
-
-
-
-# Delete file cache after user completes download
-# When a file gets save to temp it stays there until it is deleted.
-# You can choose to have the file deleted when the user makes a sucessful
-# download.  This will mean if they click on the link to download from
-# the temp store a second time it will give a 404 error.
-# You should configure something to delete old files in temp to stop it filling up.
-# on|off (defaults to on)
-deletedownloadedtempfiles = on
-
-
-
-# Initial Trickle delay
-# This is the number of seconds a browser connection is left waiting
-# before first being sent *something* to keep it alive.  The
-# *something* depends on the download manager chosen.
-# Do not choose a value too low or normal web pages will be affected.
-# A value between 20 and 110 would be sensible
-# This may be ignored by the configured download manager.
-initialtrickledelay = 20
-
-
-
-# Trickle delay
-# This is the number of seconds a browser connection is left waiting
-# before being sent more *something* to keep it alive.  The
-# *something* depends on the download manager chosen.
-# This may be ignored by the configured download manager.
-trickledelay = 10
-
-
-
-# Download Managers
-# These handle downloads of files to be filtered and scanned.
-# They differ in the method they deal with large downloads.
-# Files usually need to be downloaded 100% before they can be
-# filtered and scanned before being sent on to the browser.
-# Normally the browser can just wait, but with content scanning,
-# for example to AV, the browser may timeout or the user may get
-# confused so the download manager has to do some sort of
-# 'keep alive'.
-#
-# There are various methods possible but not all are included.
-# The author does not have the time to write them all so I have
-# included a plugin systam.  Also, not all methods work with all
-# browsers and clients.  Specifically some fancy methods don't
-# work with software that downloads updates.  To solve this,
-# each plugin can support a regular expression for matching
-# the client's user-agent string, and lists of the mime types
-# and extensions it should manage.
-#
-# Note that these are the matching methods provided by the base plugin
-# code, and individual plugins may override or add to them.
-# See the individual plugin conf files for supported options.
-#
-# The plugins are matched in the order you specify and the last
-# one is forced to match as the default, regardless of user agent
-# and other matching mechanisms.
-#
-downloadmanager = '/etc/dansguardian/downloadmanagers/fancy.conf'
-#downloadmanager = '/etc/dansguardian/downloadmanagers/trickle.conf'
-downloadmanager = '/etc/dansguardian/downloadmanagers/default.conf'
-
-
-
-# Content Scanners (Also known as AV scanners)
-# These are plugins that scan the content of all files your browser fetches
-# for example to AV scan.  The options are limitless.  Eventually all of
-# DansGuardian will be plugin based.  You can have more than one content
-# scanner. The plugins are run in the order you specify.
-# This is one of the few places you can have multiple options of the same name.
-#
-# Some of the scanner(s) require 3rd party software and libraries eg clamav.
-# See the individual plugin conf file for more options (if any).
-#
-#contentscanner = '/etc/dansguardian/contentscanners/clamav.conf'
-#contentscanner = '/etc/dansguardian/contentscanners/clamdscan.conf'
-#!! Unimplemented !! contentscanner = '/etc/dansguardian/contentscanners/kavav.conf'
-#!! Not compiled !! contentscanner = '/etc/dansguardian/contentscanners/kavdscan.conf'
-#contentscanner = '/etc/dansguardian/contentscanners/icapscan.conf'
-#!! Not compiled !! contentscanner = '/etc/dansguardian/contentscanners/commandlinescan.conf'
-
-
-
-# Content scanner timeout
-# Some of the content scanners support using a timeout value to stop
-# processing (eg AV scanning) the file if it takes too long.
-# If supported this will be used.
-# The default of 60 seconds is probably reasonable.
-contentscannertimeout = 60
-
-
-
-# Content scan exceptions
-# If 'on' exception sites, urls, users etc will be scanned
-# This is probably not desirable behavour as exceptions are
-# supposed to be trusted and will increase load.
-# Correct use of grey lists are a better idea.
-# (on|off) default = off
-contentscanexceptions = off
-
-
-
-# Auth plugins
-# These replace the usernameidmethod* options in previous versions. They
-# handle the extraction of client usernames from various sources, such as
-# Proxy-Authorisation headers and ident servers, enabling requests to be
-# handled according to the settings of the user's filter group.
-# Multiple plugins can be specified, and will be queried in order until one
-# of them either finds a username or throws an error. For example, if Squid
-# is configured with both NTLM and Basic auth enabled, and both the 'proxy-basic'
-# and 'proxy-ntlm' auth plugins are enabled here, then clients which do not support
-# NTLM can fall back to Basic without sacrificing access rights.
-#
-# If you do not use multiple filter groups, you need not specify this option.
-#
-#authplugin = '/etc/dansguardian/authplugins/proxy-basic.conf'
-#authplugin = '/etc/dansguardian/authplugins/proxy-ntlm.conf'
-#authplugin = '/etc/dansguardian/authplugins/ident.conf'
-#authplugin = '/etc/dansguardian/authplugins/ip.conf'
-
-
-
-# Re-check replaced URLs
-# As a matter of course, URLs undergo regular expression search/replace (urlregexplist)
-# *after* checking the exception site/URL/regexpURL lists, but *before* checking against
-# the banned site/URL lists, allowing certain requests that would be matched against the
-# latter in their original state to effectively be converted into grey requests.
-# With this option enabled, the exception site/URL/regexpURL lists are also re-checked
-# after replacement, making it possible for URL replacement to trigger exceptions based
-# on them.
-# Defaults to off.
-recheckreplacedurls = off
-
-
-
-# Misc settings
-
-# if on it adds an X-Forwarded-For: <clientip> to the HTTP request
-# header.  This may help solve some problem sites that need to know the
-# source ip. on | off
-forwardedfor = off
-
-
-# if on it uses the X-Forwarded-For: <clientip> to determine the client
-# IP. This is for when you have squid between the clients and DansGuardian.
-# Warning - headers are easily spoofed. on | off
-usexforwardedfor = off
-
-
-# if on it logs some debug info regarding fork()ing and accept()ing which
-# can usually be ignored.  These are logged by syslog.  It is safe to leave
-# it on or off
-logconnectionhandlingerrors = on
-
-
-
-# Fork pool options
-
-# If on, this causes DG to write to the log file whenever child processes are
-# created or destroyed (other than by crashes). This information can help in
-# understanding and tuning the following parameters, but is not generally
-# useful in production.
-logchildprocesshandling = off
-
-# sets the maximum number of processes to spawn to handle the incoming
-# connections.  Max value usually 250 depending on OS.
-# On large sites you might want to try 180.
-maxchildren = 120
-
-
-# sets the minimum number of processes to spawn to handle the incoming connections.
-# On large sites you might want to try 32.
-minchildren = 8
-
-
-# sets the minimum number of processes to be kept ready to handle connections.
-# On large sites you might want to try 8.
-minsparechildren = 4
-
-
-# sets the minimum number of processes to spawn when it runs out
-# On large sites you might want to try 10.
-preforkchildren = 6
-
-
-# sets the maximum number of processes to have doing nothing.
-# When this many are spare it will cull some of them.
-# On large sites you might want to try 64.
-maxsparechildren = 32
-
-
-# sets the maximum age of a child process before it croaks it.
-# This is the number of connections they handle before exiting.
-# On large sites you might want to try 10000.
-maxagechildren = 500
-
-
-# Sets the maximum number client IP addresses allowed to connect at once.
-# Use this to set a hard limit on the number of users allowed to concurrently
-# browse the web. Set to 0 for no limit, and to disable the IP cache process.
-maxips = 0
-
-
-
-# Process options
-# (Change these only if you really know what you are doing).
-# These options allow you to run multiple instances of DansGuardian on a single machine.
-# Remember to edit the log file path above also if that is your intention.
-
-# IPC filename
-# 
-# Defines IPC server directory and filename used to communicate with the log process.
-ipcfilename = '/tmp/.dguardianipc'
-
-# URL list IPC filename
-# 
-# Defines URL list IPC server directory and filename used to communicate with the URL
-# cache process.
-urlipcfilename = '/tmp/.dguardianurlipc'
-
-# IP list IPC filename
-#
-# Defines IP list IPC server directory and filename, for communicating with the client
-# IP cache process.
-ipipcfilename = '/tmp/.dguardianipipc'
-
-# PID filename
-# 
-# Defines process id directory and filename.
-#pidfilename = '/var/run/dansguardian.pid'
-
-# Disable daemoning
-# If enabled the process will not fork into the background.
-# It is not usually advantageous to do this.
-# on|off (defaults to off)
-nodaemon = off
-
-# Disable logging process
-# on|off (defaults to off)
-nologger = off
-
-# Enable logging of "ADs" category blocks
-# on|off (defaults to off)
-logadblocks = off
-
-# Enable logging of client User-Agent
-# Some browsers will cause a *lot* of extra information on each line!
-# on|off (defaults to off)
-loguseragent = off
-
-# Daemon runas user and group
-# This is the user that DansGuardian runs as.  Normally the user/group nobody.
-# Uncomment to use.  Defaults to the user set at compile time.
-# Temp files created during virus scanning are given owner and group read
-# permissions; to use content scanners based on external processes, such as
-# clamdscan, the two processes must run with either the same group or user ID.
-#daemonuser = 'clamav'
-#daemongroup = 'clamav'
-
-# Soft restart
-# When on this disables the forced killing off all processes in the process group.
-# This is not to be confused with the -g run time option - they are not related.
-# on|off (defaults to off)
-softrestart = off
-
-# Mail program
-# Path (sendmail-compatible) email program, with options.
-# Not used if usesmtp is disabled (filtergroup specific).
-mailer = '/usr/sbin/sendmail -t'