/[smecontribs]/rpms/smeserver-dar2/contribs7/smeserver-dar2-0.0.1-locale-2008-04-20.patch
ViewVC logotype

Contents of /rpms/smeserver-dar2/contribs7/smeserver-dar2-0.0.1-locale-2008-04-20.patch

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph

Revision 1.2 - (show annotations) (download)
Sun Nov 23 04:57:56 2008 UTC (15 years, 11 months ago) by slords
Branch: MAIN
Changes since 1.1: +0 -0 lines
FILE REMOVED 
Part of epel
1 --- /dev/null 2008-04-15 08:20:57.914268019 -0600
2 +++ pootleupdate/root/etc/e-smith/locale/da/etc/e-smith/web/functions/dar2 2008-04-20 20:53:55.000000000 -0600
3 @@ -0,0 +1,235 @@
4 +<lexicon lang="da">
5 + <entry>
6 + <base>SAVE</base>
7 + <trans>Gem</trans>
8 + </entry>
9 + <entry>
10 + <base>PERFORM</base>
11 + <trans>Udfør</trans>
12 + </entry>
13 + <entry>
14 + <base>FORM_TITLE</base>
15 + <trans>Disk ARchive</trans>
16 + </entry>
17 + <entry>
18 + <base>OPERATION_STATUS_REPORT</base>
19 + <trans>Status rapport</trans>
20 + </entry>
21 + <entry>
22 + <base>FORM_DESCRIPTION</base>
23 + <trans><![CDATA[ <p>Use this panel to define, schedule and launch server backups and restores, to and from network shares or an attached local disk.</p> <p><a class="button-like" href="dar2?page=0&page_stack=&Next=Next&wherenext=DAR2_PAGE_CREATE">Create backup job</a></p> ]]></trans>
24 + </entry>
25 + <entry>
26 + <base>NO_BACKUP_JOBS</base>
27 + <trans>There are no backup jobs in the system.</trans>
28 + </entry>
29 + <entry>
30 + <base>LABEL_ACTION</base>
31 + <trans>Aktivitet</trans>
32 + </entry>
33 + <entry>
34 + <base>MODIFY</base>
35 + <trans>View/Modify</trans>
36 + </entry>
37 + <entry>
38 + <base>BACKUP</base>
39 + <trans>Sikkerhedskopi</trans>
40 + </entry>
41 + <entry>
42 + <base>REMOVE</base>
43 + <trans>Remove</trans>
44 + </entry>
45 + <entry>
46 + <base>CREATE_TITLE</base>
47 + <trans>Create backup job</trans>
48 + </entry>
49 + <entry>
50 + <base>MODIFY_TITLE</base>
51 + <trans>Modify backup job</trans>
52 + </entry>
53 + <entry>
54 + <base>RESTORE_TITLE</base>
55 + <trans>Restore backup job</trans>
56 + </entry>
57 + <entry>
58 + <base>BACKUP_TITLE</base>
59 + <trans>Launch backup job</trans>
60 + </entry>
61 + <entry>
62 + <base>REMOVE_TITLE</base>
63 + <trans>Remove backup job</trans>
64 + </entry>
65 + <entry>
66 + <base>LABEL_JOBNAME</base>
67 + <trans>Job name</trans>
68 + </entry>
69 + <entry>
70 + <base>LABEL_DESTINATION</base>
71 + <trans>Destination</trans>
72 + </entry>
73 + <entry>
74 + <base>LABEL_BACKUP</base>
75 + <trans>Backup selections</trans>
76 + </entry>
77 + <entry>
78 + <base>LABEL_EXCLUDE</base>
79 + <trans>Exclude files</trans>
80 + </entry>
81 + <entry>
82 + <base>LABEL_PRUNE</base>
83 + <trans>Prune directories</trans>
84 + </entry>
85 + <entry>
86 + <base>LABEL_TARGET</base>
87 + <trans>Target</trans>
88 + </entry>
89 + <entry>
90 + <base>LABEL_SLICE</base>
91 + <trans>Slice size</trans>
92 + </entry>
93 + <entry>
94 + <base>LABEL_VFSTYPE</base>
95 + <trans>File system</trans>
96 + </entry>
97 +
98 + <entry>
99 + <base>LABEL_COMPRESSION</base>
100 + <trans>Compression</trans>
101 + </entry>
102 + <entry>
103 + <base>LABEL_USERNAME</base>
104 + <trans>Brugernavn</trans>
105 + </entry>
106 + <entry>
107 + <base>LABEL_PASSWORD</base>
108 + <trans>Password</trans>
109 + </entry>
110 + <entry>
111 + <base>LABEL_DESCRIPTION</base>
112 + <trans>Beskrivelse</trans>
113 + </entry>
114 + <entry>
115 + <base>LABEL_EXPIRY</base>
116 + <trans>Expiry</trans>
117 + </entry>
118 + <entry>
119 + <base>LABEL_VERBOSE</base>
120 + <trans>Verbose</trans>
121 + </entry>
122 + <entry>
123 + <base>LABEL_BACKUP_DAY</base>
124 + <trans>Backup day</trans>
125 + </entry>
126 + <entry>
127 + <base>LABEL_BACKUP_TIME</base>
128 + <trans>Backup time</trans>
129 + </entry>
130 + <entry>
131 + <base>DISABLED</base>
132 + <trans>Fra</trans>
133 + </entry>
134 + <entry>
135 + <base>ENABLED</base>
136 + <trans>Til</trans>
137 + </entry>
138 + <entry>
139 + <base>LOCALDRIVE</base>
140 + <trans>Local drive</trans>
141 + </entry>
142 + <entry>
143 + <base>MOUNTED</base>
144 + <trans>Mounted</trans>
145 + </entry>
146 + <entry>
147 + <base>NETWORKSHARE</base>
148 + <trans>Network share</trans>
149 + </entry>
150 + <entry>
151 + <base>UNMOUNTED</base>
152 + <trans>Unmounted</trans>
153 + </entry>
154 + <entry>
155 + <base>DESCRIPTION_RESTORE_DATE</base>
156 + <trans>Enter the date of the archive you wish to restore from. Format: [ yyyy.mm.dd ]</trans>
157 + </entry>
158 + <entry>
159 + <base>LABEL_RESTORE_DATE</base>
160 + <trans>Date</trans>
161 + </entry>
162 + <entry>
163 + <base>DESCRIPTION_RESTORE_DR</base>
164 + <trans><![CDATA[ <P>To perform a full disaster recovery restore set the following:</P> <P><B>Disaster Recovery</B> [ Enabled ] <B>Restore</B> [ *.* ] <B>Restore to</B> [ / ]</P> <P>Note: After completion of a full disaster recovery restore, you will need to enter the server-manager <B>Reboot or shutdown</B> panel and <B>Reconfigure</B> your P> <P>To perform a selective restore, enter one restore path per line. Paths must be relative. Example: To restore /root/contribs to the original location you would therefore enter:</P> <P><B>Disaster Recovery</B> [ Disabled ] <B>Restore</B> [ root/contribs ] <B>Restore to</B> [ / ]</P> ]]></trans>
165 + </entry>
166 + <entry>
167 + <base>LABEL_RESTORE_DR</base>
168 + <trans>Disaster Recovery</trans>
169 + </entry>
170 + <entry>
171 + <base>LABEL_RESTORE</base>
172 + <trans>Gendan</trans>
173 + </entry>
174 + <entry>
175 + <base>LABEL_RESTORE_RESTORETO</base>
176 + <trans>Restore to</trans>
177 + </entry>
178 + <entry>
179 + <base>DESCRIPTION_JOBNAME</base>
180 + <trans>Enter a unique backup job name. The name should contain only letters, numbers, periods, hyphens and underscores. No spaces.</trans>
181 + </entry>
182 + <entry>
183 + <base>DESCRIPTION_DESC</base>
184 + <trans>Enter a description for this backup job.</trans>
185 + </entry>
186 + <entry>
187 + <base>DESCRIPTION_DR</base>
188 + <trans>A Disaster Recovery backup job runs additional system processes during backup and restore events. Please set to Disabled if performing a standard backup.</trans>
189 + </entry>
190 + <entry>
191 + <base>DESCRIPTION_BACKUP</base>
192 + <trans>All backup selections needed to perform a Disaster Recovery are preset below. Note absolute paths are invalid. All paths must be relative to the base / directory. Example: [home] is relative/correct, [/home] is absolute/incorrect. If you are a performing a standard backup, edit the backup selections as required below. One entry per line. Do not enter [ /,/blah,proc,tmp ].</trans>
193 + </entry>
194 + <entry>
195 + <base>DESCRIPTION_EXCLUDE</base>
196 + <trans>Enter any file exclusions. Example: [ home/e-smith/files/ibays/ibayname/files/document.doc ]. One entry per line. Wildcards * and ? are valid.</trans>
197 + </entry>
198 + <entry>
199 + <base>DESCRIPTION_PRUNE</base>
200 + <trans>Enter any directory tree to prune and not include in the backup. Example: [ home/e-smith/files/ibays/ibayname ]. One entry per line. Wildcards * and ? valid.</trans>
201 + </entry>
202 + <entry>
203 + <base>DESCRIPTION_TARGET</base>
204 + <trans><![CDATA[ <P>Valid targets are an attached local drive or network share.</P> <P>If backing up to an attached local drive, enter the target mount point of your drive. Example: [/media/usbdisk]. Leave the username and password fields blank.</P> <P>If backing up to a network share, enter the target in UNC format. Example: [//computername/sharename]. In addition you must enter a valid username/password that is a local account on the target with full access rights to the share.</P> ]]></trans>
205 + </entry>
206 + <entry>
207 + <base>DESCRIPTION_VFSTYPE</base>
208 + <trans>Three file systems are supported. [ext3] for backup to local attached disk. [smbfs] for backup to Windows workstation and SME Server network shares. [cifs] for backup to Microsoft Windows Server. Note if using cifs, target entry above must use IP address. Example: [//10.1.1.1/sharename].</trans>
209 + </entry>
210 + <entry>
211 + <base>DESCRIPTION_SLICE</base>
212 + <trans>Enter the backup volume segment slices in megabytes. As an example to create 650MB volume segments for copying to CDR/RW you would enter [ 650 ]. This would create in the target files of the following format: job.yyyy.mm.dd.1.dar, job.yyyy.mm.dd.2.dar, etcetera. Note the maximum segment size is 2000MB. Total backup job size is limited only by available target free space.</trans>
213 + </entry>
214 + <entry>
215 + <base>DESCRIPTION_COMPRESSION</base>
216 + <trans>Enter the compression level from 0 (none) to 9 (maximum). No compression dramitcally improves backup speed.</trans>
217 + </entry>
218 + <entry>
219 + <base>DESCRIPTION_U_P</base>
220 + <trans>If backing up to a network share, enter a valid username/password that is a local account on the target with full access rights to the share. Leave the username and password blank if backing up to an attached local drive.</trans>
221 + </entry>
222 + <entry>
223 + <base>DESCRIPTION_EXPIRY</base>
224 + <trans>Enter a backup expiry time. This will keep backups on the target for n days. Choosing 0 means backups are overwritten every day.</trans>
225 + </entry>
226 + <entry>
227 + <base>DESCRIPTION_VERBOSE</base>
228 + <trans>Verbose option sets the output detail. On for full file-by-file listing and log file generated. Off for summary details only and no log file generated. Note if enabled size of output files is related to size of backup job and therefore can become quite large! Scheduled jobs will receive an e-mail to admin of job details.</trans>
229 + </entry>
230 + <entry>
231 + <base>DESCRIPTION_BACKUP_DAY</base>
232 + <trans>Enter the day you would like this backup to occur. Leave manual for unscheduled manual use.</trans>
233 + </entry>
234 + <entry>
235 + <base>DESCRIPTION_BACKUP_TIME</base>
236 + <trans>Enter the time you would like this backup to occur in 24 hr (hh:mm) format.</trans>
237 + </entry>
238 +</lexicon>
239 --- smeserver-dar2-0.0.1/root/etc/e-smith/locale/de/etc/e-smith/web/functions/dar2 2008-04-20 20:40:17.000000000 -0600
240 +++ pootleupdate/root/etc/e-smith/locale/de/etc/e-smith/web/functions/dar2 2008-04-20 20:54:51.000000000 -0600
241 @@ -5,7 +5,7 @@
242 </entry>
243 <entry>
244 <base>PERFORM</base>
245 - <trans>Ausführen</trans>
246 + <trans>Ausführen</trans>
247 </entry>
248 <entry>
249 <base>FORM_TITLE</base>
250 @@ -13,26 +13,15 @@
251 </entry>
252 <entry>
253 <base>OPERATION_STATUS_REPORT</base>
254 - <trans>
255 - Statusbericht
256 - </trans>
257 + <trans>Statusbericht</trans>
258 </entry>
259 <entry>
260 <base>FORM_DESCRIPTION</base>
261 - <trans>
262 - <![CDATA[
263 - <P>Mit dieser Erweiterung können Sie Datensicherungen und Wiederherstellungen Ihres Servers konfigurieren.<br>
264 - <P>Dabei werden neben <span style="color:blue">Netzlaufwerken</span> auch angeschlossene <span style="color:blue">lokale Festplatten</span> unterstützt.<br>
265 - <P>Sie können die Datensicherungen <span style="color:blue">zeitgesteuert</span> festlegen oder <span style="color:blue">direkt</span> starten lassen.</p>
266 -
267 - <p><a class="button-like"
268 - href="dar2?page=0&page_stack=&Next=Next&wherenext=DAR2_PAGE_CREATE">Sicherungsauftrag anlegen</a></p>
269 - ]]>
270 - </trans>
271 + <trans><![CDATA[ <P>Mit dieser Erweiterung können Sie Datensicherungen und Wiederherstellungen Ihres Servers konfigurieren.<br> <P>Dabei werden neben <span style="color:blue">Netzlaufwerken</span> auch angeschlossene <span style="color:blue">lokale Festplatten</span> unterstützt.<br> <P>Sie können die Datensicherungen <span style="color:blue">zeitgesteuert</span> festlegen oder <span style="color:blue">direkt</span> starten lassen.</p> <p><a class="button-like" href="dar2?page=0&page_stack=&Next=Next&wherenext=DAR2_PAGE_CREATE">Sicherungsauftrag anlegen</a></p> ]]></trans>
272 </entry>
273 <entry>
274 <base>NO_BACKUP_JOBS</base>
275 - <trans>Es gibt keine Sicherungsaufträge im System.</trans>
276 + <trans>Es gibt keine Sicherungsaufträge im System.</trans>
277 </entry>
278 <entry>
279 <base>LABEL_ACTION</base>
280 @@ -40,7 +29,7 @@
281 </entry>
282 <entry>
283 <base>MODIFY</base>
284 - <trans>Ansehen/Ändern</trans>
285 + <trans>Ansehen/Ändern</trans>
286 </entry>
287 <entry>
288 <base>BACKUP</base>
289 @@ -48,47 +37,27 @@
290 </entry>
291 <entry>
292 <base>REMOVE</base>
293 - <trans>Löschen</trans>
294 + <trans>Löschen</trans>
295 </entry>
296 <entry>
297 <base>CREATE_TITLE</base>
298 - <trans>
299 - <![CDATA[
300 - <strong>Datensicherung anlegen</strong>
301 - ]]>
302 - </trans>
303 + <trans><![CDATA[ <strong>Datensicherung anlegen</strong> ]]></trans>
304 </entry>
305 <entry>
306 <base>MODIFY_TITLE</base>
307 - <trans>
308 - <![CDATA[
309 - <strong>Datensicherung ändern</strong>
310 - ]]>
311 - </trans>
312 + <trans><![CDATA[ <strong>Datensicherung ändern</strong> ]]></trans>
313 </entry>
314 <entry>
315 <base>RESTORE_TITLE</base>
316 - <trans>
317 - <![CDATA[
318 - <strong>Datensicherung wiederherstellen</strong>
319 - ]]>
320 - </trans>
321 + <trans><![CDATA[ <strong>Datensicherung wiederherstellen</strong> ]]></trans>
322 </entry>
323 <entry>
324 <base>BACKUP_TITLE</base>
325 - <trans>
326 - <![CDATA[
327 - <strong>Datensicherung starten</strong>
328 - ]]>
329 - </trans>
330 + <trans><![CDATA[ <strong>Datensicherung starten</strong> ]]></trans>
331 </entry>
332 <entry>
333 <base>REMOVE_TITLE</base>
334 - <trans>
335 - <![CDATA[
336 - <strong>Datensicherung löschen</strong>
337 - ]]>
338 - </trans>
339 + <trans><![CDATA[ <strong>Datensicherung löschen</strong> ]]></trans>
340 </entry>
341 <entry>
342 <base>LABEL_JOBNAME</base>
343 @@ -100,7 +69,7 @@
344 </entry>
345 <entry>
346 <base>LABEL_BACKUP</base>
347 - <trans>Verzeichnisse auswählen</trans>
348 + <trans>Verzeichnisse auswählen</trans>
349 </entry>
350 <entry>
351 <base>LABEL_EXCLUDE</base>
352 @@ -116,7 +85,7 @@
353 </entry>
354 <entry>
355 <base>LABEL_SLICE</base>
356 - <trans>Segmentgröße</trans>
357 + <trans>Segmentgröße</trans>
358 </entry>
359 <entry>
360 <base>LABEL_VFSTYPE</base>
361 @@ -145,7 +114,7 @@
362 </entry>
363 <entry>
364 <base>LABEL_VERBOSE</base>
365 - <trans>Ausführliche Logdatei</trans>
366 + <trans>Ausführliche Logdatei</trans>
367 </entry>
368 <entry>
369 <base>LABEL_BACKUP_DAY</base>
370 @@ -181,9 +150,7 @@
371 </entry>
372 <entry>
373 <base>DESCRIPTION_RESTORE_DATE</base>
374 - <trans>
375 - Geben Sie das Datum der Sicherung an, von der wiederhergestellt werden soll. Format: [ yyyy.mm.dd ]
376 - </trans>
377 + <trans>Geben Sie das Datum der Sicherung an, von der wiederhergestellt werden soll. Format: [ yyyy.mm.dd ]</trans>
378 </entry>
379 <entry>
380 <base>LABEL_RESTORE_DATE</base>
381 @@ -191,19 +158,7 @@
382 </entry>
383 <entry>
384 <base>DESCRIPTION_RESTORE_DR</base>
385 - <trans>
386 - <![CDATA[
387 - <P>Für eine vollständige Notfall-Datensicherung geben Sie folgende Einstellungen an:</P>
388 - <P><span style="color:blue">Notfall-Datensicherung</span> [ Aktiviert ] <span style="color:blue">Wiederherstellen</span> [ *.* ] <span style="color:blue">Wiederherstellen nach</span> [ / ]</P>
389 -
390 - <P>Anmerkung: Nach dem Ende der Wiederherstellung einer vollständigen Notfall-Datensicherung müssen Sie im Server-Manager
391 - im Register <span style="color:blue">Herunterfahren/Neustart</span> die Option <span style="color:blue">Rekonfigurieren</span> auswählen und den Server neu starten.</P>
392 -
393 - <P>Um eine teilweise Wiederherstellung durchzuführen, geben Sie den Wiederherstellungspfad je Zeile ein. Dabei müssen die Pfade relativ sein.
394 - <b>Beispiel:</b> Um /root/contribs im Originalpfad wiederherzustellen, geben Sie ein:</P>
395 - <P><span style="color:blue">Notfall-Datensicherung</span> [ Deaktiviert ] <span style="color:blue">Wiederherstellen</span> [ root/contribs ] <span style="color:blue">Wiederherstellen nach</span> [ / ]</P>
396 - ]]>
397 - </trans>
398 + <trans><![CDATA[ <P>Für eine vollständige Notfall-Datensicherung geben Sie folgende Einstellungen an:</P> <P><span style="color:blue">Notfall-Datensicherung</span> [ Aktiviert ] <span style="color:blue">Wiederherstellen</span> [ *.* ] <span style="color:blue">Wiederherstellen nach</span> [ / ]</P> <P>Anmerkung: Nach dem Ende der Wiederherstellung einer vollständigen Notfall-Datensicherung müssen Sie im Server-Manager im Register <span style="color:blue">Herunterfahren/Neustart</span> die Option <span style="color:blue">Rekonfigurieren</span> auswählen und den Server neu starten.</P> <P>Um eine teilweise Wiederherstellung durchzuführen, geben Sie den Wiederherstellungspfad je Zeile ein. Dabei müssen die Pfade relativ sein. b> Um /root/contribs im Originalpfad wiederherzustellen, geben Sie ein:</P> <P><span style="color:blue">Notfall-Datensicherung</span> [ Deaktiviert ] <span style="color:blue">Wiederherstellen</span> [ root/contribs ] <span style="color:blue">Wiederherstellen nach</span> [ / ]</P> ]]></trans>
399 </entry>
400 <entry>
401 <base>LABEL_RESTORE_DR</base>
402 @@ -219,237 +174,62 @@
403 </entry>
404 <entry>
405 <base>DESCRIPTION_JOBNAME</base>
406 - <trans>
407 - <![CDATA[
408 - Geben Sie einen eindeutigen Namen für den Sicherungsauftrag an. Der Name darf nur <span style="color:blue">Kleinbuchstaben</span>, <span style="color:blue">Zahlen</span>,
409 - <span style="color:blue">Bindestriche</span> und <span style="color:blue">Unterstriche</span> enthalten. <span style="color:blue">Leerzeichen</span> sind nicht gestattet.
410 - ]]>
411 - </trans>
412 + <trans><![CDATA[ Geben Sie einen eindeutigen Namen für den Sicherungsauftrag an. Der Name darf nur <span style="color:blue">Kleinbuchstaben</span>, <span style="color:blue">Zahlen</span>, <span style="color:blue">Bindestriche</span> und <span style="color:blue">Unterstriche</span> enthalten. <span style="color:blue">Leerzeichen</span> sind nicht gestattet. ]]></trans>
413 </entry>
414 <entry>
415 <base>DESCRIPTION_DESC</base>
416 - <trans>
417 - Geben Sie eine Beschreibung für diesen Sicherungsauftrag an.
418 - </trans>
419 + <trans>Geben Sie eine Beschreibung für diesen Sicherungsauftrag an.</trans>
420 </entry>
421 <entry>
422 <base>DESCRIPTION_DR</base>
423 - <trans>
424 - <![CDATA[
425 - <P>Eine Notfall-Datensicherung durchläuft zusätzliche Systemprozesse während der Erstellung bzw. der Wiederherstellung.
426 - Beim Ausführen der Standardsicherung sollte deshalb die Notfalldatensicherungs-Option <span style="color:blue">deaktiviert</span> sein, um Leistungseinbußen zu vermeiden.
427 - ]]>
428 - </trans>
429 + <trans><![CDATA[ <P>Eine Notfall-Datensicherung durchläuft zusätzliche Systemprozesse während der Erstellung bzw. der Wiederherstellung. Beim Ausführen der Standardsicherung sollte deshalb die Notfalldatensicherungs-Option <span style="color:blue">deaktiviert</span> sein, um Leistungseinbußen zu vermeiden. ]]></trans>
430 </entry>
431 <entry>
432 <base>DESCRIPTION_BACKUP</base>
433 - <trans>
434 - <![CDATA[
435 - <P>Die benötigten Verzeichnisse und Dateien zur Durchführung einer Notfall-Datensicherung sind bereits <span style="color:blue">voreingestellt</span>.
436 - Alle Einträge müssen mit <span style="color:blue">relativen Pfaden ohne führenden Slash '/'</span> angegeben werden.
437 - Wenn Sie eine Standardsicherung durchführen, ändern Sie die Verzeichnisse und Dateien nach Ihren Wünschen.
438 - Benutzen Sie <span style="color:blue">je Eintrag eine Zeile</span> und geben Sie nicht <span style="color:blue">[ /,proc,tmp ] </span> ein.
439 - ]]>
440 - </trans>
441 + <trans><![CDATA[ <P>Die benötigten Verzeichnisse und Dateien zur Durchführung einer Notfall-Datensicherung sind bereits <span style="color:blue">voreingestellt</span>. Alle Einträge müssen mit <span style="color:blue">relativen Pfaden ohne führenden Slash '/'</span> angegeben werden. Wenn Sie eine Standardsicherung durchführen, ändern Sie die Verzeichnisse und Dateien nach Ihren Wünschen. Benutzen Sie <span style="color:blue">je Eintrag eine Zeile</span> und geben Sie nicht <span style="color:blue">[ /,proc,tmp ] </span> ein. ]]></trans>
442 </entry>
443 <entry>
444 <base>DESCRIPTION_EXCLUDE</base>
445 - <trans>
446 - <![CDATA[
447 - <P>Geben Sie an, welche <span style="color:blue">Dateien</span> Sie aus der Datensicherung <span style="color:blue">ausschließen</span> möchten.</p>
448 - Beispiel: [ home/e-smith/files/ibays/ibayname/files/document.doc ].
449 - Benutzen Sie <span style="color:blue">je Eintrag eine Zeile</span>. Wildcards * und ? sind erlaubt.
450 - ]]>
451 - </trans>
452 + <trans><![CDATA[ <P>Geben Sie an, welche <span style="color:blue">Dateien</span> Sie aus der Datensicherung <span style="color:blue">ausschließen</span> möchten.</p> Beispiel: [ home/e-smith/files/ibays/ibayname/files/document.doc ]. Benutzen Sie <span style="color:blue">je Eintrag eine Zeile</span>. Wildcards * und ? sind erlaubt. ]]></trans>
453 </entry>
454 <entry>
455 <base>DESCRIPTION_PRUNE</base>
456 - <trans>
457 - <![CDATA[
458 - <P>Geben Sie an, welche <span style="color:blue">Verzeichnisse</span> Sie aus der Datensicherung <span style="color:blue">ausschließen</span> möchten.</p>
459 - Beispiel: [ home/e-smith/files/ibays/ibayname ].
460 - Benutzen Sie <span style="color:blue">je Eintrag eine Zeile</span>. Wildcards * und ? sind erlaubt.
461 - ]]>
462 - </trans>
463 + <trans><![CDATA[ <P>Geben Sie an, welche <span style="color:blue">Verzeichnisse</span> Sie aus der Datensicherung <span style="color:blue">ausschließen</span> möchten.</p> Beispiel: [ home/e-smith/files/ibays/ibayname ]. Benutzen Sie <span style="color:blue">je Eintrag eine Zeile</span>. Wildcards * und ? sind erlaubt. ]]></trans>
464 </entry>
465 <entry>
466 <base>DESCRIPTION_TARGET</base>
467 - <trans>
468 - <![CDATA[
469 - <P>Zulässige Zieladressen sind <span style="color:blue">angeschlossene lokale Festplatten</span> oder <span style="color:blue">Netzlaufwerke</span>.</P>
470 -
471 - <P>Geben Sie den <span style="color:blue">mount point</span> an, wenn Sie auf eine angeschlossene lokale Festplatte sichern wollen.
472 - Beispiel: [/media/usbdisk]. </p>Lassen Sie dabei die Felder <span style="color:blue">Benutzername</span> und <span style="color:blue">Kennwort</span> <b>frei</b>.</P>
473 -
474 - <P>Geben Sie die Zieladresse im <span style="color:blue">UNC Format</span> an, wenn Sie auf ein Netzlaufwerk sichern wollen.
475 - Beispiel: [//computername/verzeichnisname]. Zusätzlich müssen Sie einen <span style="color:blue">Benutzer mit Kennwort</span> eintragen,
476 - der als lokaler Benutzer auf dem Netzlaufwerk über <span style="color:blue">vollständige Schreibrechte</span> verfügt.</P>
477 - ]]>
478 - </trans>
479 + <trans><![CDATA[ <P>Zulässige Zieladressen sind <span style="color:blue">angeschlossene lokale Festplatten</span> oder <span style="color:blue">Netzlaufwerke</span>.</P> <P>Geben Sie den <span style="color:blue">mount point</span> an, wenn Sie auf eine angeschlossene lokale Festplatte sichern wollen. Beispiel: [/media/usbdisk]. </p>Lassen Sie dabei die Felder <span style="color:blue">Benutzername</span> und <span style="color:blue">Kennwort</span> <b>frei</b>.</P> <P>Geben Sie die Zieladresse im <span style="color:blue">UNC Format</span> an, wenn Sie auf ein Netzlaufwerk sichern wollen. Beispiel: [//computername/verzeichnisname]. Zusätzlich müssen Sie einen <span style="color:blue">Benutzer mit Kennwort</span> eintragen, der als lokaler Benutzer auf dem Netzlaufwerk über <span style="color:blue">vollständige Schreibrechte</span> verfügt.</P> ]]></trans>
480 </entry>
481 <entry>
482 <base>DESCRIPTION_VFSTYPE</base>
483 - <trans>
484 - <![CDATA[
485 - <P>Drei Dateisysteme werden unterstützt:<br>
486 - <P><span style="color:blue">[ext3]</span> zur Datensicherung auf angeschlossene lokale Festplatten.<br>
487 - <span style="color:blue">[smbfs]</span> zur Datensicherung auf Windows Arbeitsplätze und SME-Server Netzlaufwerke.<br>
488 - <span style="color:blue">[cifs]</span> zur Datensicherung auf Microsoft Windows Server.<br>
489 - <P><b>Anmerkung:</b> Wenn Sie cifs verwenden wollen, müssen Sie die Zieladresse immer zusammen mit der IP-Adresse verwenden.
490 - Beispiel: [//10.1.1.1/verzeichnisname].
491 - ]]>
492 - </trans>
493 + <trans><![CDATA[ <P>Drei Dateisysteme werden unterstützt:<br> <P><span style="color:blue">[ext3]</span> zur Datensicherung auf angeschlossene lokale Festplatten.<br> <span style="color:blue">[smbfs]</span> zur Datensicherung auf Windows Arbeitsplätze und SME-Server Netzlaufwerke.<br> <span style="color:blue">[cifs]</span> zur Datensicherung auf Microsoft Windows Server.<br> <P><b>Anmerkung:</b> Wenn Sie cifs verwenden wollen, müssen Sie die Zieladresse immer zusammen mit der IP-Adresse verwenden. Beispiel: [//10.1.1.1/verzeichnisname]. ]]></trans>
494 </entry>
495 <entry>
496 <base>DESCRIPTION_SLICE</base>
497 - <trans>
498 - <![CDATA[
499 - <P>Geben Sie die <span style="color:blue">Segmentgröße</span> der Datensicherung in <span style="color:blue">Megabytes</span> an. Um zum Beispiel 650MB große Segmente
500 - für Kopien auf CDR/RW zu erstellen, geben Sie [ 650 ] an.
501 - Dadurch werden in der Zieladresse Dateien im Format <span style="color:blue">job.yyyy.mm.dd.1.dar</span>, <span style="color:blue">job.yyyy.mm.dd.2.dar</span>, etc. erstellt.
502 - Beachten Sie, dass die maximale Segmentgröße <span style="color:blue">2000MB</span> ist.
503 - Insgesamt ist die Größe der Datensicherung nur durch den verfügbaren Speicherplatz in der Zieladresse begrenzt.
504 - ]]>
505 - </trans>
506 + <trans><![CDATA[ <P>Geben Sie die <span style="color:blue">Segmentgröße</span> der Datensicherung in <span style="color:blue">Megabytes</span> an. Um zum Beispiel 650MB große Segmente für Kopien auf CDR/RW zu erstellen, geben Sie [ 650 ] an. Dadurch werden in der Zieladresse Dateien im Format <span style="color:blue">job.yyyy.mm.dd.1.dar</span>, <span style="color:blue">job.yyyy.mm.dd.2.dar</span>, etc. erstellt. Beachten Sie, dass die maximale Segmentgröße <span style="color:blue">2000MB</span> ist. Insgesamt ist die Größe der Datensicherung nur durch den verfügbaren Speicherplatz in der Zieladresse begrenzt. ]]></trans>
507 </entry>
508 <entry>
509 <base>DESCRIPTION_COMPRESSION</base>
510 - <trans>
511 - <![CDATA[
512 - <P>Geben Sie den <span style="color:blue">Kompressionsfaktor</span> in Stufen von 0 (kein) bis 9 (Maximum) an.
513 - Die Geschwindigkeit ihrer Datensicherung ist <span style="color:blue">dramtisch besser</span>, wenn Sie auf Kompression <span style="color:blue">verzichten</span>.
514 - ]]>
515 - </trans>
516 + <trans><![CDATA[ <P>Geben Sie den <span style="color:blue">Kompressionsfaktor</span> in Stufen von 0 (kein) bis 9 (Maximum) an. Die Geschwindigkeit ihrer Datensicherung ist <span style="color:blue">dramtisch besser</span>, wenn Sie auf Kompression <span style="color:blue">verzichten</span>. ]]></trans>
517 </entry>
518 <entry>
519 <base>DESCRIPTION_U_P</base>
520 - <trans>
521 - Wenn Sie auf ein Netzlaufwerk sichern wollen, geben Sie zusätzlich müssen Sie einen Benutzer mit Kennwort an,
522 - der als lokaler Benutzer auf dem Netzlaufwerk über vollständige Schreibrechte verfügt.
523 - Lassen Sie die Felder Benutzername und Kennwort frei, wenn Sie auf eine angeschlossene lokale Festplatte sichern wollen.
524 - </trans>
525 + <trans>Wenn Sie auf ein Netzlaufwerk sichern wollen, geben Sie zusätzlich müssen Sie einen Benutzer mit Kennwort an, der als lokaler Benutzer auf dem Netzlaufwerk über vollständige Schreibrechte verfügt. Lassen Sie die Felder Benutzername und Kennwort frei, wenn Sie auf eine angeschlossene lokale Festplatte sichern wollen.</trans>
526 </entry>
527 <entry>
528 <base>DESCRIPTION_EXPIRY</base>
529 - <trans>
530 - <![CDATA[
531 - <P>Geben Sie an, <span style="color:blue">wie viele Tage</span> vorhandene Datensicherungen in der Zieladresse <span style="color:blue">beibehalten</span> werden sollen.</p>
532 - Bei Auswahl von 0 Tage werden die Datensicherungen <span style="color:blue">täglich überschrieben</span>.
533 - ]]>
534 - </trans>
535 + <trans><![CDATA[ <P>Geben Sie an, <span style="color:blue">wie viele Tage</span> vorhandene Datensicherungen in der Zieladresse <span style="color:blue">beibehalten</span> werden sollen.</p> Bei Auswahl von 0 Tage werden die Datensicherungen <span style="color:blue">täglich überschrieben</span>. ]]></trans>
536 </entry>
537 <entry>
538 <base>DESCRIPTION_VERBOSE</base>
539 - <trans>
540 - <![CDATA[
541 - <P>Geben Sie an, ob Sie eine <span style="color:blue">ausführliche Logdatei</span> schreiben lassen wollen.<br>
542 - <P>Mit <span style="color:blue">'Ja'</span> wird eine ausführliche Liste mit allen Dateien erstellt.<br>
543 - Mit <span style="color:blue">'Nein'</span> wird keine ausführliche Logdatei, sondern nur ein zusammengefasstes Ergebnis erstellt.<br>
544 - <P><b>Anmerkung:</b> Das Schreiben einer ausführlichen Logdatei kann bei großen Sicherungsaufträgen zu <span style="color:blue">sehr großen Dateien</span> führen!<br>
545 - Zeitgesteuerte Sicherungsaufträge erstellen eine <span style="color:blue">E-Mail an den admin</span> mit zusammengefasstem Ergebnis.
546 - ]]>
547 - </trans>
548 + <trans><![CDATA[ <P>Geben Sie an, ob Sie eine <span style="color:blue">ausführliche Logdatei</span> schreiben lassen wollen.<br> <P>Mit <span style="color:blue">'Ja'</span> wird eine ausführliche Liste mit allen Dateien erstellt.<br> Mit <span style="color:blue">'Nein'</span> wird keine ausführliche Logdatei, sondern nur ein zusammengefasstes Ergebnis erstellt.<br> <P><b>Anmerkung:</b> Das Schreiben einer ausführlichen Logdatei kann bei großen Sicherungsaufträgen zu <span style="color:blue">sehr großen Dateien</span> führen!<br> Zeitgesteuerte Sicherungsaufträge erstellen eine <span style="color:blue">E-Mail an den admin</span> mit zusammengefasstem Ergebnis. ]]></trans>
549 </entry>
550 <entry>
551 <base>DESCRIPTION_BACKUP_DAY</base>
552 - <trans>
553 - <![CDATA[
554 - <P>Geben Sie den <span style="color:blue">Wochentag</span> an, an dem der Sicherungsauftrag ausgeführt werden soll.
555 - Bei Auswahl von 'manuell' verzichten Sie auf die zeitgesteuerte Ausführung.
556 - Mit Auswahl von '*' wird der Auftrag täglich ausgeführt.
557 - ]]>
558 - </trans>
559 + <trans><![CDATA[ <P>Geben Sie den <span style="color:blue">Wochentag</span> an, an dem der Sicherungsauftrag ausgeführt werden soll. Bei Auswahl von 'manuell' verzichten Sie auf die zeitgesteuerte Ausführung. Mit Auswahl von '*' wird der Auftrag täglich ausgeführt. ]]></trans>
560 </entry>
561 <entry>
562 <base>DESCRIPTION_BACKUP_TIME</base>
563 - <trans>
564 - <![CDATA[
565 - <P>Geben Sie die <span style="color:blue">Zeit</span>, zu der der Sicherungsauftrag ausgeführt werden soll, im 24-Stunden-Format (hh:mm) an.
566 - ]]>
567 - </trans>
568 - </entry>
569 - <entry>
570 - <base>Enabled</base>
571 - <trans>
572 - Aktiviert
573 - </trans>
574 - </entry>
575 - <entry>
576 - <base>Disabled</base>
577 - <trans>
578 - Deaktiviert
579 - </trans>
580 - </entry>
581 - <entry>
582 - <base>off</base>
583 - <trans>
584 - Nein
585 - </trans>
586 - </entry>
587 - <entry>
588 - <base>on</base>
589 - <trans>
590 - Ja
591 - </trans>
592 - </entry>
593 - <entry>
594 - <base>manual</base>
595 - <trans>
596 - manuell
597 - </trans>
598 - </entry>
599 - <entry>
600 - <base>MON</base>
601 - <trans>
602 - Montag
603 - </trans>
604 - </entry>
605 - <entry>
606 - <base>TUE</base>
607 - <trans>
608 - Dienstag
609 - </trans>
610 - </entry>
611 - <entry>
612 - <base>WED</base>
613 - <trans>
614 - Mittwoch
615 - </trans>
616 - </entry>
617 - <entry>
618 - <base>THU</base>
619 - <trans>
620 - Donnerstag
621 - </trans>
622 - </entry>
623 - <entry>
624 - <base>FRI</base>
625 - <trans>
626 - Freitag
627 - </trans>
628 - </entry>
629 - <entry>
630 - <base>SAT</base>
631 - <trans>
632 - Samstag
633 - </trans>
634 - </entry>
635 - <entry>
636 - <base>SUN</base>
637 - <trans>
638 - Sonntag
639 - </trans>
640 - </entry>
641 - <entry>
642 - <base>Backup</base>
643 - <trans>
644 - Administration
645 - </trans>
646 - </entry>
647 - <entry>
648 - <base>SUCCESS</base>
649 - <trans>
650 - Die Aktion wurde erfolgreich ausgeführt.
651 - </trans>
652 + <trans><![CDATA[ <P>Geben Sie die <span style="color:blue">Zeit</span>, zu der der Sicherungsauftrag ausgeführt werden soll, im 24-Stunden-Format (hh:mm) an. ]]></trans>
653 </entry>
654 </lexicon>
655 --- /dev/null 2008-04-15 08:20:57.914268019 -0600
656 +++ pootleupdate/root/etc/e-smith/locale/el/etc/e-smith/web/functions/dar2 2008-04-20 20:55:49.000000000 -0600
657 @@ -0,0 +1,235 @@
658 +<lexicon lang="el">
659 + <entry>
660 + <base>SAVE</base>
661 + <trans>Αποθήκευση</trans>
662 + </entry>
663 + <entry>
664 + <base>PERFORM</base>
665 + <trans>Perform</trans>
666 + </entry>
667 + <entry>
668 + <base>FORM_TITLE</base>
669 + <trans>Disk ARchive</trans>
670 + </entry>
671 + <entry>
672 + <base>OPERATION_STATUS_REPORT</base>
673 + <trans>Αναφορά κατάστασης Λειτουργίας</trans>
674 + </entry>
675 + <entry>
676 + <base>FORM_DESCRIPTION</base>
677 + <trans><![CDATA[ <p>Use this panel to define, schedule and launch server backups and restores, to and from network shares or an attached local disk.</p> <p><a class="button-like" href="dar2?page=0&page_stack=&Next=Next&wherenext=DAR2_PAGE_CREATE">Create backup job</a></p> ]]></trans>
678 + </entry>
679 + <entry>
680 + <base>NO_BACKUP_JOBS</base>
681 + <trans>There are no backup jobs in the system.</trans>
682 + </entry>
683 + <entry>
684 + <base>LABEL_ACTION</base>
685 + <trans>Action</trans>
686 + </entry>
687 + <entry>
688 + <base>MODIFY</base>
689 + <trans>View/Modify</trans>
690 + </entry>
691 + <entry>
692 + <base>BACKUP</base>
693 + <trans>Backup</trans>
694 + </entry>
695 + <entry>
696 + <base>REMOVE</base>
697 + <trans>Remove</trans>
698 + </entry>
699 + <entry>
700 + <base>CREATE_TITLE</base>
701 + <trans>Create backup job</trans>
702 + </entry>
703 + <entry>
704 + <base>MODIFY_TITLE</base>
705 + <trans>Modify backup job</trans>
706 + </entry>
707 + <entry>
708 + <base>RESTORE_TITLE</base>
709 + <trans>Restore backup job</trans>
710 + </entry>
711 + <entry>
712 + <base>BACKUP_TITLE</base>
713 + <trans>Launch backup job</trans>
714 + </entry>
715 + <entry>
716 + <base>REMOVE_TITLE</base>
717 + <trans>Remove backup job</trans>
718 + </entry>
719 + <entry>
720 + <base>LABEL_JOBNAME</base>
721 + <trans>Job name</trans>
722 + </entry>
723 + <entry>
724 + <base>LABEL_DESTINATION</base>
725 + <trans>Destination</trans>
726 + </entry>
727 + <entry>
728 + <base>LABEL_BACKUP</base>
729 + <trans>Backup selections</trans>
730 + </entry>
731 + <entry>
732 + <base>LABEL_EXCLUDE</base>
733 + <trans>Exclude files</trans>
734 + </entry>
735 + <entry>
736 + <base>LABEL_PRUNE</base>
737 + <trans>Prune directories</trans>
738 + </entry>
739 + <entry>
740 + <base>LABEL_TARGET</base>
741 + <trans>Target</trans>
742 + </entry>
743 + <entry>
744 + <base>LABEL_SLICE</base>
745 + <trans>Slice size</trans>
746 + </entry>
747 + <entry>
748 + <base>LABEL_VFSTYPE</base>
749 + <trans>File system</trans>
750 + </entry>
751 +
752 + <entry>
753 + <base>LABEL_COMPRESSION</base>
754 + <trans>Compression</trans>
755 + </entry>
756 + <entry>
757 + <base>LABEL_USERNAME</base>
758 + <trans>Όνομα Χρήστη</trans>
759 + </entry>
760 + <entry>
761 + <base>LABEL_PASSWORD</base>
762 + <trans>Κωδικός Πρόσβασης</trans>
763 + </entry>
764 + <entry>
765 + <base>LABEL_DESCRIPTION</base>
766 + <trans>Περιγραφή</trans>
767 + </entry>
768 + <entry>
769 + <base>LABEL_EXPIRY</base>
770 + <trans>Expiry</trans>
771 + </entry>
772 + <entry>
773 + <base>LABEL_VERBOSE</base>
774 + <trans>Verbose</trans>
775 + </entry>
776 + <entry>
777 + <base>LABEL_BACKUP_DAY</base>
778 + <trans>Backup day</trans>
779 + </entry>
780 + <entry>
781 + <base>LABEL_BACKUP_TIME</base>
782 + <trans>Backup time</trans>
783 + </entry>
784 + <entry>
785 + <base>DISABLED</base>
786 + <trans>Disabled</trans>
787 + </entry>
788 + <entry>
789 + <base>ENABLED</base>
790 + <trans>Enabled</trans>
791 + </entry>
792 + <entry>
793 + <base>LOCALDRIVE</base>
794 + <trans>Local drive</trans>
795 + </entry>
796 + <entry>
797 + <base>MOUNTED</base>
798 + <trans>Mounted</trans>
799 + </entry>
800 + <entry>
801 + <base>NETWORKSHARE</base>
802 + <trans>Network share</trans>
803 + </entry>
804 + <entry>
805 + <base>UNMOUNTED</base>
806 + <trans>Unmounted</trans>
807 + </entry>
808 + <entry>
809 + <base>DESCRIPTION_RESTORE_DATE</base>
810 + <trans>Enter the date of the archive you wish to restore from. Format: [ yyyy.mm.dd ]</trans>
811 + </entry>
812 + <entry>
813 + <base>LABEL_RESTORE_DATE</base>
814 + <trans>Date</trans>
815 + </entry>
816 + <entry>
817 + <base>DESCRIPTION_RESTORE_DR</base>
818 + <trans><![CDATA[ <P>To perform a full disaster recovery restore set the following:</P> <P><B>Disaster Recovery</B> [ Enabled ] <B>Restore</B> [ *.* ] <B>Restore to</B> [ / ]</P> <P>Note: After completion of a full disaster recovery restore, you will need to enter the server-manager <B>Reboot or shutdown</B> panel and <B>Reconfigure</B> your P> <P>To perform a selective restore, enter one restore path per line. Paths must be relative. Example: To restore /root/contribs to the original location you would therefore enter:</P> <P><B>Disaster Recovery</B> [ Disabled ] <B>Restore</B> [ root/contribs ] <B>Restore to</B> [ / ]</P> ]]></trans>
819 + </entry>
820 + <entry>
821 + <base>LABEL_RESTORE_DR</base>
822 + <trans>Disaster Recovery</trans>
823 + </entry>
824 + <entry>
825 + <base>LABEL_RESTORE</base>
826 + <trans>Επαναφορά</trans>
827 + </entry>
828 + <entry>
829 + <base>LABEL_RESTORE_RESTORETO</base>
830 + <trans>Restore to</trans>
831 + </entry>
832 + <entry>
833 + <base>DESCRIPTION_JOBNAME</base>
834 + <trans>Enter a unique backup job name. The name should contain only letters, numbers, periods, hyphens and underscores. No spaces.</trans>
835 + </entry>
836 + <entry>
837 + <base>DESCRIPTION_DESC</base>
838 + <trans>Enter a description for this backup job.</trans>
839 + </entry>
840 + <entry>
841 + <base>DESCRIPTION_DR</base>
842 + <trans>A Disaster Recovery backup job runs additional system processes during backup and restore events. Please set to Disabled if performing a standard backup.</trans>
843 + </entry>
844 + <entry>
845 + <base>DESCRIPTION_BACKUP</base>
846 + <trans>All backup selections needed to perform a Disaster Recovery are preset below. Note absolute paths are invalid. All paths must be relative to the base / directory. Example: [home] is relative/correct, [/home] is absolute/incorrect. If you are a performing a standard backup, edit the backup selections as required below. One entry per line. Do not enter [ /,/blah,proc,tmp ].</trans>
847 + </entry>
848 + <entry>
849 + <base>DESCRIPTION_EXCLUDE</base>
850 + <trans>Enter any file exclusions. Example: [ home/e-smith/files/ibays/ibayname/files/document.doc ]. One entry per line. Wildcards * and ? are valid.</trans>
851 + </entry>
852 + <entry>
853 + <base>DESCRIPTION_PRUNE</base>
854 + <trans>Enter any directory tree to prune and not include in the backup. Example: [ home/e-smith/files/ibays/ibayname ]. One entry per line. Wildcards * and ? valid.</trans>
855 + </entry>
856 + <entry>
857 + <base>DESCRIPTION_TARGET</base>
858 + <trans><![CDATA[ <P>Valid targets are an attached local drive or network share.</P> <P>If backing up to an attached local drive, enter the target mount point of your drive. Example: [/media/usbdisk]. Leave the username and password fields blank.</P> <P>If backing up to a network share, enter the target in UNC format. Example: [//computername/sharename]. In addition you must enter a valid username/password that is a local account on the target with full access rights to the share.</P> ]]></trans>
859 + </entry>
860 + <entry>
861 + <base>DESCRIPTION_VFSTYPE</base>
862 + <trans>Three file systems are supported. [ext3] for backup to local attached disk. [smbfs] for backup to Windows workstation and SME Server network shares. [cifs] for backup to Microsoft Windows Server. Note if using cifs, target entry above must use IP address. Example: [//10.1.1.1/sharename].</trans>
863 + </entry>
864 + <entry>
865 + <base>DESCRIPTION_SLICE</base>
866 + <trans>Enter the backup volume segment slices in megabytes. As an example to create 650MB volume segments for copying to CDR/RW you would enter [ 650 ]. This would create in the target files of the following format: job.yyyy.mm.dd.1.dar, job.yyyy.mm.dd.2.dar, etcetera. Note the maximum segment size is 2000MB. Total backup job size is limited only by available target free space.</trans>
867 + </entry>
868 + <entry>
869 + <base>DESCRIPTION_COMPRESSION</base>
870 + <trans>Enter the compression level from 0 (none) to 9 (maximum). No compression dramitcally improves backup speed.</trans>
871 + </entry>
872 + <entry>
873 + <base>DESCRIPTION_U_P</base>
874 + <trans>If backing up to a network share, enter a valid username/password that is a local account on the target with full access rights to the share. Leave the username and password blank if backing up to an attached local drive.</trans>
875 + </entry>
876 + <entry>
877 + <base>DESCRIPTION_EXPIRY</base>
878 + <trans>Enter a backup expiry time. This will keep backups on the target for n days. Choosing 0 means backups are overwritten every day.</trans>
879 + </entry>
880 + <entry>
881 + <base>DESCRIPTION_VERBOSE</base>
882 + <trans>Verbose option sets the output detail. On for full file-by-file listing and log file generated. Off for summary details only and no log file generated. Note if enabled size of output files is related to size of backup job and therefore can become quite large! Scheduled jobs will receive an e-mail to admin of job details.</trans>
883 + </entry>
884 + <entry>
885 + <base>DESCRIPTION_BACKUP_DAY</base>
886 + <trans>Enter the day you would like this backup to occur. Leave manual for unscheduled manual use.</trans>
887 + </entry>
888 + <entry>
889 + <base>DESCRIPTION_BACKUP_TIME</base>
890 + <trans>Enter the time you would like this backup to occur in 24 hr (hh:mm) format.</trans>
891 + </entry>
892 +</lexicon>
893 --- /dev/null 2008-04-15 08:20:57.914268019 -0600
894 +++ pootleupdate/root/etc/e-smith/locale/es/etc/e-smith/web/functions/dar2 2008-04-20 20:56:41.000000000 -0600
895 @@ -0,0 +1,235 @@
896 +<lexicon lang="es">
897 + <entry>
898 + <base>SAVE</base>
899 + <trans>Guardar</trans>
900 + </entry>
901 + <entry>
902 + <base>PERFORM</base>
903 + <trans>Ejecutar</trans>
904 + </entry>
905 + <entry>
906 + <base>FORM_TITLE</base>
907 + <trans>Disk ARchive</trans>
908 + </entry>
909 + <entry>
910 + <base>OPERATION_STATUS_REPORT</base>
911 + <trans>Estado de la operación</trans>
912 + </entry>
913 + <entry>
914 + <base>FORM_DESCRIPTION</base>
915 + <trans><![CDATA[ <p>Use this panel to define, schedule and launch server backups and restores, to and from network shares or an attached local disk.</p> <p><a class="button-like" href="dar2?page=0&page_stack=&Next=Next&wherenext=DAR2_PAGE_CREATE">Create backup job</a></p> ]]></trans>
916 + </entry>
917 + <entry>
918 + <base>NO_BACKUP_JOBS</base>
919 + <trans>There are no backup jobs in the system.</trans>
920 + </entry>
921 + <entry>
922 + <base>LABEL_ACTION</base>
923 + <trans>Acción</trans>
924 + </entry>
925 + <entry>
926 + <base>MODIFY</base>
927 + <trans>View/Modify</trans>
928 + </entry>
929 + <entry>
930 + <base>BACKUP</base>
931 + <trans>Respaldar</trans>
932 + </entry>
933 + <entry>
934 + <base>REMOVE</base>
935 + <trans>Eliminar</trans>
936 + </entry>
937 + <entry>
938 + <base>CREATE_TITLE</base>
939 + <trans>Create backup job</trans>
940 + </entry>
941 + <entry>
942 + <base>MODIFY_TITLE</base>
943 + <trans>Modify backup job</trans>
944 + </entry>
945 + <entry>
946 + <base>RESTORE_TITLE</base>
947 + <trans>Restore backup job</trans>
948 + </entry>
949 + <entry>
950 + <base>BACKUP_TITLE</base>
951 + <trans>Launch backup job</trans>
952 + </entry>
953 + <entry>
954 + <base>REMOVE_TITLE</base>
955 + <trans>Remove backup job</trans>
956 + </entry>
957 + <entry>
958 + <base>LABEL_JOBNAME</base>
959 + <trans>Job name</trans>
960 + </entry>
961 + <entry>
962 + <base>LABEL_DESTINATION</base>
963 + <trans>Destino</trans>
964 + </entry>
965 + <entry>
966 + <base>LABEL_BACKUP</base>
967 + <trans>Backup selections</trans>
968 + </entry>
969 + <entry>
970 + <base>LABEL_EXCLUDE</base>
971 + <trans>Exclude files</trans>
972 + </entry>
973 + <entry>
974 + <base>LABEL_PRUNE</base>
975 + <trans>Prune directories</trans>
976 + </entry>
977 + <entry>
978 + <base>LABEL_TARGET</base>
979 + <trans>Target</trans>
980 + </entry>
981 + <entry>
982 + <base>LABEL_SLICE</base>
983 + <trans>Slice size</trans>
984 + </entry>
985 + <entry>
986 + <base>LABEL_VFSTYPE</base>
987 + <trans>File system</trans>
988 + </entry>
989 +
990 + <entry>
991 + <base>LABEL_COMPRESSION</base>
992 + <trans>Compression</trans>
993 + </entry>
994 + <entry>
995 + <base>LABEL_USERNAME</base>
996 + <trans>Nombre de usuario</trans>
997 + </entry>
998 + <entry>
999 + <base>LABEL_PASSWORD</base>
1000 + <trans>Contraseña</trans>
1001 + </entry>
1002 + <entry>
1003 + <base>LABEL_DESCRIPTION</base>
1004 + <trans>Descripción</trans>
1005 + </entry>
1006 + <entry>
1007 + <base>LABEL_EXPIRY</base>
1008 + <trans>Expiry</trans>
1009 + </entry>
1010 + <entry>
1011 + <base>LABEL_VERBOSE</base>
1012 + <trans>Verbose</trans>
1013 + </entry>
1014 + <entry>
1015 + <base>LABEL_BACKUP_DAY</base>
1016 + <trans>Backup day</trans>
1017 + </entry>
1018 + <entry>
1019 + <base>LABEL_BACKUP_TIME</base>
1020 + <trans>Backup time</trans>
1021 + </entry>
1022 + <entry>
1023 + <base>DISABLED</base>
1024 + <trans>Deshabilitado</trans>
1025 + </entry>
1026 + <entry>
1027 + <base>ENABLED</base>
1028 + <trans>Habilitado</trans>
1029 + </entry>
1030 + <entry>
1031 + <base>LOCALDRIVE</base>
1032 + <trans>Local drive</trans>
1033 + </entry>
1034 + <entry>
1035 + <base>MOUNTED</base>
1036 + <trans>Mounted</trans>
1037 + </entry>
1038 + <entry>
1039 + <base>NETWORKSHARE</base>
1040 + <trans>Network share</trans>
1041 + </entry>
1042 + <entry>
1043 + <base>UNMOUNTED</base>
1044 + <trans>Unmounted</trans>
1045 + </entry>
1046 + <entry>
1047 + <base>DESCRIPTION_RESTORE_DATE</base>
1048 + <trans>Enter the date of the archive you wish to restore from. Format: [ yyyy.mm.dd ]</trans>
1049 + </entry>
1050 + <entry>
1051 + <base>LABEL_RESTORE_DATE</base>
1052 + <trans>Date</trans>
1053 + </entry>
1054 + <entry>
1055 + <base>DESCRIPTION_RESTORE_DR</base>
1056 + <trans><![CDATA[ <P>To perform a full disaster recovery restore set the following:</P> <P><B>Disaster Recovery</B> [ Enabled ] <B>Restore</B> [ *.* ] <B>Restore to</B> [ / ]</P> <P>Note: After completion of a full disaster recovery restore, you will need to enter the server-manager <B>Reboot or shutdown</B> panel and <B>Reconfigure</B> your P> <P>To perform a selective restore, enter one restore path per line. Paths must be relative. Example: To restore /root/contribs to the original location you would therefore enter:</P> <P><B>Disaster Recovery</B> [ Disabled ] <B>Restore</B> [ root/contribs ] <B>Restore to</B> [ / ]</P> ]]></trans>
1057 + </entry>
1058 + <entry>
1059 + <base>LABEL_RESTORE_DR</base>
1060 + <trans>Disaster Recovery</trans>
1061 + </entry>
1062 + <entry>
1063 + <base>LABEL_RESTORE</base>
1064 + <trans>Restaurar</trans>
1065 + </entry>
1066 + <entry>
1067 + <base>LABEL_RESTORE_RESTORETO</base>
1068 + <trans>Restore to</trans>
1069 + </entry>
1070 + <entry>
1071 + <base>DESCRIPTION_JOBNAME</base>
1072 + <trans>Enter a unique backup job name. The name should contain only letters, numbers, periods, hyphens and underscores. No spaces.</trans>
1073 + </entry>
1074 + <entry>
1075 + <base>DESCRIPTION_DESC</base>
1076 + <trans>Enter a description for this backup job.</trans>
1077 + </entry>
1078 + <entry>
1079 + <base>DESCRIPTION_DR</base>
1080 + <trans>A Disaster Recovery backup job runs additional system processes during backup and restore events. Please set to Disabled if performing a standard backup.</trans>
1081 + </entry>
1082 + <entry>
1083 + <base>DESCRIPTION_BACKUP</base>
1084 + <trans>All backup selections needed to perform a Disaster Recovery are preset below. Note absolute paths are invalid. All paths must be relative to the base / directory. Example: [home] is relative/correct, [/home] is absolute/incorrect. If you are a performing a standard backup, edit the backup selections as required below. One entry per line. Do not enter [ /,/blah,proc,tmp ].</trans>
1085 + </entry>
1086 + <entry>
1087 + <base>DESCRIPTION_EXCLUDE</base>
1088 + <trans>Enter any file exclusions. Example: [ home/e-smith/files/ibays/ibayname/files/document.doc ]. One entry per line. Wildcards * and ? are valid.</trans>
1089 + </entry>
1090 + <entry>
1091 + <base>DESCRIPTION_PRUNE</base>
1092 + <trans>Enter any directory tree to prune and not include in the backup. Example: [ home/e-smith/files/ibays/ibayname ]. One entry per line. Wildcards * and ? valid.</trans>
1093 + </entry>
1094 + <entry>
1095 + <base>DESCRIPTION_TARGET</base>
1096 + <trans><![CDATA[ <P>Valid targets are an attached local drive or network share.</P> <P>If backing up to an attached local drive, enter the target mount point of your drive. Example: [/media/usbdisk]. Leave the username and password fields blank.</P> <P>If backing up to a network share, enter the target in UNC format. Example: [//computername/sharename]. In addition you must enter a valid username/password that is a local account on the target with full access rights to the share.</P> ]]></trans>
1097 + </entry>
1098 + <entry>
1099 + <base>DESCRIPTION_VFSTYPE</base>
1100 + <trans>Three file systems are supported. [ext3] for backup to local attached disk. [smbfs] for backup to Windows workstation and SME Server network shares. [cifs] for backup to Microsoft Windows Server. Note if using cifs, target entry above must use IP address. Example: [//10.1.1.1/sharename].</trans>
1101 + </entry>
1102 + <entry>
1103 + <base>DESCRIPTION_SLICE</base>
1104 + <trans>Enter the backup volume segment slices in megabytes. As an example to create 650MB volume segments for copying to CDR/RW you would enter [ 650 ]. This would create in the target files of the following format: job.yyyy.mm.dd.1.dar, job.yyyy.mm.dd.2.dar, etcetera. Note the maximum segment size is 2000MB. Total backup job size is limited only by available target free space.</trans>
1105 + </entry>
1106 + <entry>
1107 + <base>DESCRIPTION_COMPRESSION</base>
1108 + <trans>Enter the compression level from 0 (none) to 9 (maximum). No compression dramitcally improves backup speed.</trans>
1109 + </entry>
1110 + <entry>
1111 + <base>DESCRIPTION_U_P</base>
1112 + <trans>If backing up to a network share, enter a valid username/password that is a local account on the target with full access rights to the share. Leave the username and password blank if backing up to an attached local drive.</trans>
1113 + </entry>
1114 + <entry>
1115 + <base>DESCRIPTION_EXPIRY</base>
1116 + <trans>Enter a backup expiry time. This will keep backups on the target for n days. Choosing 0 means backups are overwritten every day.</trans>
1117 + </entry>
1118 + <entry>
1119 + <base>DESCRIPTION_VERBOSE</base>
1120 + <trans>Verbose option sets the output detail. On for full file-by-file listing and log file generated. Off for summary details only and no log file generated. Note if enabled size of output files is related to size of backup job and therefore can become quite large! Scheduled jobs will receive an e-mail to admin of job details.</trans>
1121 + </entry>
1122 + <entry>
1123 + <base>DESCRIPTION_BACKUP_DAY</base>
1124 + <trans>Enter the day you would like this backup to occur. Leave manual for unscheduled manual use.</trans>
1125 + </entry>
1126 + <entry>
1127 + <base>DESCRIPTION_BACKUP_TIME</base>
1128 + <trans>Enter the time you would like this backup to occur in 24 hr (hh:mm) format.</trans>
1129 + </entry>
1130 +</lexicon>
1131 --- /dev/null 2008-04-15 08:20:57.914268019 -0600
1132 +++ pootleupdate/root/etc/e-smith/locale/fr/etc/e-smith/web/functions/dar2 2008-04-20 20:57:32.000000000 -0600
1133 @@ -0,0 +1,235 @@
1134 +<lexicon lang="fr">
1135 + <entry>
1136 + <base>SAVE</base>
1137 + <trans>Enregistrer</trans>
1138 + </entry>
1139 + <entry>
1140 + <base>PERFORM</base>
1141 + <trans>Exécuter</trans>
1142 + </entry>
1143 + <entry>
1144 + <base>FORM_TITLE</base>
1145 + <trans>Disk ARchive</trans>
1146 + </entry>
1147 + <entry>
1148 + <base>OPERATION_STATUS_REPORT</base>
1149 + <trans>Rapport d'état de l'opération</trans>
1150 + </entry>
1151 + <entry>
1152 + <base>FORM_DESCRIPTION</base>
1153 + <trans><![CDATA[ <p>Use this panel to define, schedule and launch server backups and restores, to and from network shares or an attached local disk.</p> <p><a class="button-like" href="dar2?page=0&page_stack=&Next=Next&wherenext=DAR2_PAGE_CREATE">Create backup job</a></p> ]]></trans>
1154 + </entry>
1155 + <entry>
1156 + <base>NO_BACKUP_JOBS</base>
1157 + <trans>There are no backup jobs in the system.</trans>
1158 + </entry>
1159 + <entry>
1160 + <base>LABEL_ACTION</base>
1161 + <trans>Action</trans>
1162 + </entry>
1163 + <entry>
1164 + <base>MODIFY</base>
1165 + <trans>View/Modify</trans>
1166 + </entry>
1167 + <entry>
1168 + <base>BACKUP</base>
1169 + <trans>Backup</trans>
1170 + </entry>
1171 + <entry>
1172 + <base>REMOVE</base>
1173 + <trans>Remove</trans>
1174 + </entry>
1175 + <entry>
1176 + <base>CREATE_TITLE</base>
1177 + <trans>Create backup job</trans>
1178 + </entry>
1179 + <entry>
1180 + <base>MODIFY_TITLE</base>
1181 + <trans>Modify backup job</trans>
1182 + </entry>
1183 + <entry>
1184 + <base>RESTORE_TITLE</base>
1185 + <trans>Restore backup job</trans>
1186 + </entry>
1187 + <entry>
1188 + <base>BACKUP_TITLE</base>
1189 + <trans>Launch backup job</trans>
1190 + </entry>
1191 + <entry>
1192 + <base>REMOVE_TITLE</base>
1193 + <trans>Remove backup job</trans>
1194 + </entry>
1195 + <entry>
1196 + <base>LABEL_JOBNAME</base>
1197 + <trans>Job name</trans>
1198 + </entry>
1199 + <entry>
1200 + <base>LABEL_DESTINATION</base>
1201 + <trans>Destination</trans>
1202 + </entry>
1203 + <entry>
1204 + <base>LABEL_BACKUP</base>
1205 + <trans>Backup selections</trans>
1206 + </entry>
1207 + <entry>
1208 + <base>LABEL_EXCLUDE</base>
1209 + <trans>Exclude files</trans>
1210 + </entry>
1211 + <entry>
1212 + <base>LABEL_PRUNE</base>
1213 + <trans>Prune directories</trans>
1214 + </entry>
1215 + <entry>
1216 + <base>LABEL_TARGET</base>
1217 + <trans>Target</trans>
1218 + </entry>
1219 + <entry>
1220 + <base>LABEL_SLICE</base>
1221 + <trans>Slice size</trans>
1222 + </entry>
1223 + <entry>
1224 + <base>LABEL_VFSTYPE</base>
1225 + <trans>File system</trans>
1226 + </entry>
1227 +
1228 + <entry>
1229 + <base>LABEL_COMPRESSION</base>
1230 + <trans>Compression</trans>
1231 + </entry>
1232 + <entry>
1233 + <base>LABEL_USERNAME</base>
1234 + <trans>Utilisateur</trans>
1235 + </entry>
1236 + <entry>
1237 + <base>LABEL_PASSWORD</base>
1238 + <trans>Mot de passe</trans>
1239 + </entry>
1240 + <entry>
1241 + <base>LABEL_DESCRIPTION</base>
1242 + <trans>Description</trans>
1243 + </entry>
1244 + <entry>
1245 + <base>LABEL_EXPIRY</base>
1246 + <trans>Expiry</trans>
1247 + </entry>
1248 + <entry>
1249 + <base>LABEL_VERBOSE</base>
1250 + <trans>Verbose</trans>
1251 + </entry>
1252 + <entry>
1253 + <base>LABEL_BACKUP_DAY</base>
1254 + <trans>Backup day</trans>
1255 + </entry>
1256 + <entry>
1257 + <base>LABEL_BACKUP_TIME</base>
1258 + <trans>Backup time</trans>
1259 + </entry>
1260 + <entry>
1261 + <base>DISABLED</base>
1262 + <trans>Désactivé</trans>
1263 + </entry>
1264 + <entry>
1265 + <base>ENABLED</base>
1266 + <trans>Activé</trans>
1267 + </entry>
1268 + <entry>
1269 + <base>LOCALDRIVE</base>
1270 + <trans>Local drive</trans>
1271 + </entry>
1272 + <entry>
1273 + <base>MOUNTED</base>
1274 + <trans>Mounted</trans>
1275 + </entry>
1276 + <entry>
1277 + <base>NETWORKSHARE</base>
1278 + <trans>Network share</trans>
1279 + </entry>
1280 + <entry>
1281 + <base>UNMOUNTED</base>
1282 + <trans>Unmounted</trans>
1283 + </entry>
1284 + <entry>
1285 + <base>DESCRIPTION_RESTORE_DATE</base>
1286 + <trans>Enter the date of the archive you wish to restore from. Format: [ yyyy.mm.dd ]</trans>
1287 + </entry>
1288 + <entry>
1289 + <base>LABEL_RESTORE_DATE</base>
1290 + <trans>Date</trans>
1291 + </entry>
1292 + <entry>
1293 + <base>DESCRIPTION_RESTORE_DR</base>
1294 + <trans><![CDATA[ <P>To perform a full disaster recovery restore set the following:</P> <P><B>Disaster Recovery</B> [ Enabled ] <B>Restore</B> [ *.* ] <B>Restore to</B> [ / ]</P> <P>Note: After completion of a full disaster recovery restore, you will need to enter the server-manager <B>Reboot or shutdown</B> panel and <B>Reconfigure</B> your P> <P>To perform a selective restore, enter one restore path per line. Paths must be relative. Example: To restore /root/contribs to the original location you would therefore enter:</P> <P><B>Disaster Recovery</B> [ Disabled ] <B>Restore</B> [ root/contribs ] <B>Restore to</B> [ / ]</P> ]]></trans>
1295 + </entry>
1296 + <entry>
1297 + <base>LABEL_RESTORE_DR</base>
1298 + <trans>Disaster Recovery</trans>
1299 + </entry>
1300 + <entry>
1301 + <base>LABEL_RESTORE</base>
1302 + <trans>Restaurer</trans>
1303 + </entry>
1304 + <entry>
1305 + <base>LABEL_RESTORE_RESTORETO</base>
1306 + <trans>Restore to</trans>
1307 + </entry>
1308 + <entry>
1309 + <base>DESCRIPTION_JOBNAME</base>
1310 + <trans>Enter a unique backup job name. The name should contain only letters, numbers, periods, hyphens and underscores. No spaces.</trans>
1311 + </entry>
1312 + <entry>
1313 + <base>DESCRIPTION_DESC</base>
1314 + <trans>Enter a description for this backup job.</trans>
1315 + </entry>
1316 + <entry>
1317 + <base>DESCRIPTION_DR</base>
1318 + <trans>A Disaster Recovery backup job runs additional system processes during backup and restore events. Please set to Disabled if performing a standard backup.</trans>
1319 + </entry>
1320 + <entry>
1321 + <base>DESCRIPTION_BACKUP</base>
1322 + <trans>All backup selections needed to perform a Disaster Recovery are preset below. Note absolute paths are invalid. All paths must be relative to the base / directory. Example: [home] is relative/correct, [/home] is absolute/incorrect. If you are a performing a standard backup, edit the backup selections as required below. One entry per line. Do not enter [ /,/blah,proc,tmp ].</trans>
1323 + </entry>
1324 + <entry>
1325 + <base>DESCRIPTION_EXCLUDE</base>
1326 + <trans>Enter any file exclusions. Example: [ home/e-smith/files/ibays/ibayname/files/document.doc ]. One entry per line. Wildcards * and ? are valid.</trans>
1327 + </entry>
1328 + <entry>
1329 + <base>DESCRIPTION_PRUNE</base>
1330 + <trans>Enter any directory tree to prune and not include in the backup. Example: [ home/e-smith/files/ibays/ibayname ]. One entry per line. Wildcards * and ? valid.</trans>
1331 + </entry>
1332 + <entry>
1333 + <base>DESCRIPTION_TARGET</base>
1334 + <trans><![CDATA[ <P>Valid targets are an attached local drive or network share.</P> <P>If backing up to an attached local drive, enter the target mount point of your drive. Example: [/media/usbdisk]. Leave the username and password fields blank.</P> <P>If backing up to a network share, enter the target in UNC format. Example: [//computername/sharename]. In addition you must enter a valid username/password that is a local account on the target with full access rights to the share.</P> ]]></trans>
1335 + </entry>
1336 + <entry>
1337 + <base>DESCRIPTION_VFSTYPE</base>
1338 + <trans>Three file systems are supported. [ext3] for backup to local attached disk. [smbfs] for backup to Windows workstation and SME Server network shares. [cifs] for backup to Microsoft Windows Server. Note if using cifs, target entry above must use IP address. Example: [//10.1.1.1/sharename].</trans>
1339 + </entry>
1340 + <entry>
1341 + <base>DESCRIPTION_SLICE</base>
1342 + <trans>Enter the backup volume segment slices in megabytes. As an example to create 650MB volume segments for copying to CDR/RW you would enter [ 650 ]. This would create in the target files of the following format: job.yyyy.mm.dd.1.dar, job.yyyy.mm.dd.2.dar, etcetera. Note the maximum segment size is 2000MB. Total backup job size is limited only by available target free space.</trans>
1343 + </entry>
1344 + <entry>
1345 + <base>DESCRIPTION_COMPRESSION</base>
1346 + <trans>Enter the compression level from 0 (none) to 9 (maximum). No compression dramitcally improves backup speed.</trans>
1347 + </entry>
1348 + <entry>
1349 + <base>DESCRIPTION_U_P</base>
1350 + <trans>If backing up to a network share, enter a valid username/password that is a local account on the target with full access rights to the share. Leave the username and password blank if backing up to an attached local drive.</trans>
1351 + </entry>
1352 + <entry>
1353 + <base>DESCRIPTION_EXPIRY</base>
1354 + <trans>Enter a backup expiry time. This will keep backups on the target for n days. Choosing 0 means backups are overwritten every day.</trans>
1355 + </entry>
1356 + <entry>
1357 + <base>DESCRIPTION_VERBOSE</base>
1358 + <trans>Verbose option sets the output detail. On for full file-by-file listing and log file generated. Off for summary details only and no log file generated. Note if enabled size of output files is related to size of backup job and therefore can become quite large! Scheduled jobs will receive an e-mail to admin of job details.</trans>
1359 + </entry>
1360 + <entry>
1361 + <base>DESCRIPTION_BACKUP_DAY</base>
1362 + <trans>Enter the day you would like this backup to occur. Leave manual for unscheduled manual use.</trans>
1363 + </entry>
1364 + <entry>
1365 + <base>DESCRIPTION_BACKUP_TIME</base>
1366 + <trans>Enter the time you would like this backup to occur in 24 hr (hh:mm) format.</trans>
1367 + </entry>
1368 +</lexicon>
1369 --- /dev/null 2008-04-15 08:20:57.914268019 -0600
1370 +++ pootleupdate/root/etc/e-smith/locale/hu/etc/e-smith/web/functions/dar2 2008-04-20 20:58:23.000000000 -0600
1371 @@ -0,0 +1,235 @@
1372 +<lexicon lang="hu">
1373 + <entry>
1374 + <base>SAVE</base>
1375 + <trans>Save</trans>
1376 + </entry>
1377 + <entry>
1378 + <base>PERFORM</base>
1379 + <trans>Végrehajtás</trans>
1380 + </entry>
1381 + <entry>
1382 + <base>FORM_TITLE</base>
1383 + <trans>Disk ARchive</trans>
1384 + </entry>
1385 + <entry>
1386 + <base>OPERATION_STATUS_REPORT</base>
1387 + <trans>Operation status report</trans>
1388 + </entry>
1389 + <entry>
1390 + <base>FORM_DESCRIPTION</base>
1391 + <trans><![CDATA[ <p>Use this panel to define, schedule and launch server backups and restores, to and from network shares or an attached local disk.</p> <p><a class="button-like" href="dar2?page=0&page_stack=&Next=Next&wherenext=DAR2_PAGE_CREATE">Create backup job</a></p> ]]></trans>
1392 + </entry>
1393 + <entry>
1394 + <base>NO_BACKUP_JOBS</base>
1395 + <trans>There are no backup jobs in the system.</trans>
1396 + </entry>
1397 + <entry>
1398 + <base>LABEL_ACTION</base>
1399 + <trans>Action</trans>
1400 + </entry>
1401 + <entry>
1402 + <base>MODIFY</base>
1403 + <trans>View/Modify</trans>
1404 + </entry>
1405 + <entry>
1406 + <base>BACKUP</base>
1407 + <trans>Backup</trans>
1408 + </entry>
1409 + <entry>
1410 + <base>REMOVE</base>
1411 + <trans>Eltávolít</trans>
1412 + </entry>
1413 + <entry>
1414 + <base>CREATE_TITLE</base>
1415 + <trans>Create backup job</trans>
1416 + </entry>
1417 + <entry>
1418 + <base>MODIFY_TITLE</base>
1419 + <trans>Modify backup job</trans>
1420 + </entry>
1421 + <entry>
1422 + <base>RESTORE_TITLE</base>
1423 + <trans>Restore backup job</trans>
1424 + </entry>
1425 + <entry>
1426 + <base>BACKUP_TITLE</base>
1427 + <trans>Launch backup job</trans>
1428 + </entry>
1429 + <entry>
1430 + <base>REMOVE_TITLE</base>
1431 + <trans>Remove backup job</trans>
1432 + </entry>
1433 + <entry>
1434 + <base>LABEL_JOBNAME</base>
1435 + <trans>Job name</trans>
1436 + </entry>
1437 + <entry>
1438 + <base>LABEL_DESTINATION</base>
1439 + <trans>Destination</trans>
1440 + </entry>
1441 + <entry>
1442 + <base>LABEL_BACKUP</base>
1443 + <trans>Backup selections</trans>
1444 + </entry>
1445 + <entry>
1446 + <base>LABEL_EXCLUDE</base>
1447 + <trans>Exclude files</trans>
1448 + </entry>
1449 + <entry>
1450 + <base>LABEL_PRUNE</base>
1451 + <trans>Prune directories</trans>
1452 + </entry>
1453 + <entry>
1454 + <base>LABEL_TARGET</base>
1455 + <trans>Target</trans>
1456 + </entry>
1457 + <entry>
1458 + <base>LABEL_SLICE</base>
1459 + <trans>Slice size</trans>
1460 + </entry>
1461 + <entry>
1462 + <base>LABEL_VFSTYPE</base>
1463 + <trans>File system</trans>
1464 + </entry>
1465 +
1466 + <entry>
1467 + <base>LABEL_COMPRESSION</base>
1468 + <trans>Compression</trans>
1469 + </entry>
1470 + <entry>
1471 + <base>LABEL_USERNAME</base>
1472 + <trans>Felhasználónév</trans>
1473 + </entry>
1474 + <entry>
1475 + <base>LABEL_PASSWORD</base>
1476 + <trans>Jelszó</trans>
1477 + </entry>
1478 + <entry>
1479 + <base>LABEL_DESCRIPTION</base>
1480 + <trans>Description</trans>
1481 + </entry>
1482 + <entry>
1483 + <base>LABEL_EXPIRY</base>
1484 + <trans>Expiry</trans>
1485 + </entry>
1486 + <entry>
1487 + <base>LABEL_VERBOSE</base>
1488 + <trans>Verbose</trans>
1489 + </entry>
1490 + <entry>
1491 + <base>LABEL_BACKUP_DAY</base>
1492 + <trans>Backup day</trans>
1493 + </entry>
1494 + <entry>
1495 + <base>LABEL_BACKUP_TIME</base>
1496 + <trans>Backup time</trans>
1497 + </entry>
1498 + <entry>
1499 + <base>DISABLED</base>
1500 + <trans>Disabled</trans>
1501 + </entry>
1502 + <entry>
1503 + <base>ENABLED</base>
1504 + <trans>Enabled</trans>
1505 + </entry>
1506 + <entry>
1507 + <base>LOCALDRIVE</base>
1508 + <trans>Local drive</trans>
1509 + </entry>
1510 + <entry>
1511 + <base>MOUNTED</base>
1512 + <trans>Mounted</trans>
1513 + </entry>
1514 + <entry>
1515 + <base>NETWORKSHARE</base>
1516 + <trans>Network share</trans>
1517 + </entry>
1518 + <entry>
1519 + <base>UNMOUNTED</base>
1520 + <trans>Unmounted</trans>
1521 + </entry>
1522 + <entry>
1523 + <base>DESCRIPTION_RESTORE_DATE</base>
1524 + <trans>Enter the date of the archive you wish to restore from. Format: [ yyyy.mm.dd ]</trans>
1525 + </entry>
1526 + <entry>
1527 + <base>LABEL_RESTORE_DATE</base>
1528 + <trans>Date</trans>
1529 + </entry>
1530 + <entry>
1531 + <base>DESCRIPTION_RESTORE_DR</base>
1532 + <trans><![CDATA[ <P>To perform a full disaster recovery restore set the following:</P> <P><B>Disaster Recovery</B> [ Enabled ] <B>Restore</B> [ *.* ] <B>Restore to</B> [ / ]</P> <P>Note: After completion of a full disaster recovery restore, you will need to enter the server-manager <B>Reboot or shutdown</B> panel and <B>Reconfigure</B> your P> <P>To perform a selective restore, enter one restore path per line. Paths must be relative. Example: To restore /root/contribs to the original location you would therefore enter:</P> <P><B>Disaster Recovery</B> [ Disabled ] <B>Restore</B> [ root/contribs ] <B>Restore to</B> [ / ]</P> ]]></trans>
1533 + </entry>
1534 + <entry>
1535 + <base>LABEL_RESTORE_DR</base>
1536 + <trans>Disaster Recovery</trans>
1537 + </entry>
1538 + <entry>
1539 + <base>LABEL_RESTORE</base>
1540 + <trans>Rendszer-visszaállítás</trans>
1541 + </entry>
1542 + <entry>
1543 + <base>LABEL_RESTORE_RESTORETO</base>
1544 + <trans>Restore to</trans>
1545 + </entry>
1546 + <entry>
1547 + <base>DESCRIPTION_JOBNAME</base>
1548 + <trans>Enter a unique backup job name. The name should contain only letters, numbers, periods, hyphens and underscores. No spaces.</trans>
1549 + </entry>
1550 + <entry>
1551 + <base>DESCRIPTION_DESC</base>
1552 + <trans>Enter a description for this backup job.</trans>
1553 + </entry>
1554 + <entry>
1555 + <base>DESCRIPTION_DR</base>
1556 + <trans>A Disaster Recovery backup job runs additional system processes during backup and restore events. Please set to Disabled if performing a standard backup.</trans>
1557 + </entry>
1558 + <entry>
1559 + <base>DESCRIPTION_BACKUP</base>
1560 + <trans>All backup selections needed to perform a Disaster Recovery are preset below. Note absolute paths are invalid. All paths must be relative to the base / directory. Example: [home] is relative/correct, [/home] is absolute/incorrect. If you are a performing a standard backup, edit the backup selections as required below. One entry per line. Do not enter [ /,/blah,proc,tmp ].</trans>
1561 + </entry>
1562 + <entry>
1563 + <base>DESCRIPTION_EXCLUDE</base>
1564 + <trans>Enter any file exclusions. Example: [ home/e-smith/files/ibays/ibayname/files/document.doc ]. One entry per line. Wildcards * and ? are valid.</trans>
1565 + </entry>
1566 + <entry>
1567 + <base>DESCRIPTION_PRUNE</base>
1568 + <trans>Enter any directory tree to prune and not include in the backup. Example: [ home/e-smith/files/ibays/ibayname ]. One entry per line. Wildcards * and ? valid.</trans>
1569 + </entry>
1570 + <entry>
1571 + <base>DESCRIPTION_TARGET</base>
1572 + <trans><![CDATA[ <P>Valid targets are an attached local drive or network share.</P> <P>If backing up to an attached local drive, enter the target mount point of your drive. Example: [/media/usbdisk]. Leave the username and password fields blank.</P> <P>If backing up to a network share, enter the target in UNC format. Example: [//computername/sharename]. In addition you must enter a valid username/password that is a local account on the target with full access rights to the share.</P> ]]></trans>
1573 + </entry>
1574 + <entry>
1575 + <base>DESCRIPTION_VFSTYPE</base>
1576 + <trans>Three file systems are supported. [ext3] for backup to local attached disk. [smbfs] for backup to Windows workstation and SME Server network shares. [cifs] for backup to Microsoft Windows Server. Note if using cifs, target entry above must use IP address. Example: [//10.1.1.1/sharename].</trans>
1577 + </entry>
1578 + <entry>
1579 + <base>DESCRIPTION_SLICE</base>
1580 + <trans>Enter the backup volume segment slices in megabytes. As an example to create 650MB volume segments for copying to CDR/RW you would enter [ 650 ]. This would create in the target files of the following format: job.yyyy.mm.dd.1.dar, job.yyyy.mm.dd.2.dar, etcetera. Note the maximum segment size is 2000MB. Total backup job size is limited only by available target free space.</trans>
1581 + </entry>
1582 + <entry>
1583 + <base>DESCRIPTION_COMPRESSION</base>
1584 + <trans>Enter the compression level from 0 (none) to 9 (maximum). No compression dramitcally improves backup speed.</trans>
1585 + </entry>
1586 + <entry>
1587 + <base>DESCRIPTION_U_P</base>
1588 + <trans>If backing up to a network share, enter a valid username/password that is a local account on the target with full access rights to the share. Leave the username and password blank if backing up to an attached local drive.</trans>
1589 + </entry>
1590 + <entry>
1591 + <base>DESCRIPTION_EXPIRY</base>
1592 + <trans>Enter a backup expiry time. This will keep backups on the target for n days. Choosing 0 means backups are overwritten every day.</trans>
1593 + </entry>
1594 + <entry>
1595 + <base>DESCRIPTION_VERBOSE</base>
1596 + <trans>Verbose option sets the output detail. On for full file-by-file listing and log file generated. Off for summary details only and no log file generated. Note if enabled size of output files is related to size of backup job and therefore can become quite large! Scheduled jobs will receive an e-mail to admin of job details.</trans>
1597 + </entry>
1598 + <entry>
1599 + <base>DESCRIPTION_BACKUP_DAY</base>
1600 + <trans>Enter the day you would like this backup to occur. Leave manual for unscheduled manual use.</trans>
1601 + </entry>
1602 + <entry>
1603 + <base>DESCRIPTION_BACKUP_TIME</base>
1604 + <trans>Enter the time you would like this backup to occur in 24 hr (hh:mm) format.</trans>
1605 + </entry>
1606 +</lexicon>
1607 --- /dev/null 2008-04-15 08:20:57.914268019 -0600
1608 +++ pootleupdate/root/etc/e-smith/locale/id/etc/e-smith/web/functions/dar2 2008-04-20 20:59:14.000000000 -0600
1609 @@ -0,0 +1,235 @@
1610 +<lexicon lang="id">
1611 + <entry>
1612 + <base>SAVE</base>
1613 + <trans>Save</trans>
1614 + </entry>
1615 + <entry>
1616 + <base>PERFORM</base>
1617 + <trans>Jalankan</trans>
1618 + </entry>
1619 + <entry>
1620 + <base>FORM_TITLE</base>
1621 + <trans>Disk ARchive</trans>
1622 + </entry>
1623 + <entry>
1624 + <base>OPERATION_STATUS_REPORT</base>
1625 + <trans>Operation status report</trans>
1626 + </entry>
1627 + <entry>
1628 + <base>FORM_DESCRIPTION</base>
1629 + <trans><![CDATA[ <p>Use this panel to define, schedule and launch server backups and restores, to and from network shares or an attached local disk.</p> <p><a class="button-like" href="dar2?page=0&page_stack=&Next=Next&wherenext=DAR2_PAGE_CREATE">Create backup job</a></p> ]]></trans>
1630 + </entry>
1631 + <entry>
1632 + <base>NO_BACKUP_JOBS</base>
1633 + <trans>There are no backup jobs in the system.</trans>
1634 + </entry>
1635 + <entry>
1636 + <base>LABEL_ACTION</base>
1637 + <trans>Action</trans>
1638 + </entry>
1639 + <entry>
1640 + <base>MODIFY</base>
1641 + <trans>View/Modify</trans>
1642 + </entry>
1643 + <entry>
1644 + <base>BACKUP</base>
1645 + <trans>Backup</trans>
1646 + </entry>
1647 + <entry>
1648 + <base>REMOVE</base>
1649 + <trans>Hapus</trans>
1650 + </entry>
1651 + <entry>
1652 + <base>CREATE_TITLE</base>
1653 + <trans>Create backup job</trans>
1654 + </entry>
1655 + <entry>
1656 + <base>MODIFY_TITLE</base>
1657 + <trans>Modify backup job</trans>
1658 + </entry>
1659 + <entry>
1660 + <base>RESTORE_TITLE</base>
1661 + <trans>Restore backup job</trans>
1662 + </entry>
1663 + <entry>
1664 + <base>BACKUP_TITLE</base>
1665 + <trans>Launch backup job</trans>
1666 + </entry>
1667 + <entry>
1668 + <base>REMOVE_TITLE</base>
1669 + <trans>Remove backup job</trans>
1670 + </entry>
1671 + <entry>
1672 + <base>LABEL_JOBNAME</base>
1673 + <trans>Job name</trans>
1674 + </entry>
1675 + <entry>
1676 + <base>LABEL_DESTINATION</base>
1677 + <trans>Destination</trans>
1678 + </entry>
1679 + <entry>
1680 + <base>LABEL_BACKUP</base>
1681 + <trans>Backup selections</trans>
1682 + </entry>
1683 + <entry>
1684 + <base>LABEL_EXCLUDE</base>
1685 + <trans>Exclude files</trans>
1686 + </entry>
1687 + <entry>
1688 + <base>LABEL_PRUNE</base>
1689 + <trans>Prune directories</trans>
1690 + </entry>
1691 + <entry>
1692 + <base>LABEL_TARGET</base>
1693 + <trans>Target</trans>
1694 + </entry>
1695 + <entry>
1696 + <base>LABEL_SLICE</base>
1697 + <trans>Slice size</trans>
1698 + </entry>
1699 + <entry>
1700 + <base>LABEL_VFSTYPE</base>
1701 + <trans>File system</trans>
1702 + </entry>
1703 +
1704 + <entry>
1705 + <base>LABEL_COMPRESSION</base>
1706 + <trans>Compression</trans>
1707 + </entry>
1708 + <entry>
1709 + <base>LABEL_USERNAME</base>
1710 + <trans>Nama pengguna</trans>
1711 + </entry>
1712 + <entry>
1713 + <base>LABEL_PASSWORD</base>
1714 + <trans>Kata kunci</trans>
1715 + </entry>
1716 + <entry>
1717 + <base>LABEL_DESCRIPTION</base>
1718 + <trans>Gambaran</trans>
1719 + </entry>
1720 + <entry>
1721 + <base>LABEL_EXPIRY</base>
1722 + <trans>Expiry</trans>
1723 + </entry>
1724 + <entry>
1725 + <base>LABEL_VERBOSE</base>
1726 + <trans>Verbose</trans>
1727 + </entry>
1728 + <entry>
1729 + <base>LABEL_BACKUP_DAY</base>
1730 + <trans>Backup day</trans>
1731 + </entry>
1732 + <entry>
1733 + <base>LABEL_BACKUP_TIME</base>
1734 + <trans>Backup time</trans>
1735 + </entry>
1736 + <entry>
1737 + <base>DISABLED</base>
1738 + <trans>Disabled</trans>
1739 + </entry>
1740 + <entry>
1741 + <base>ENABLED</base>
1742 + <trans>Enabled</trans>
1743 + </entry>
1744 + <entry>
1745 + <base>LOCALDRIVE</base>
1746 + <trans>Local drive</trans>
1747 + </entry>
1748 + <entry>
1749 + <base>MOUNTED</base>
1750 + <trans>Mounted</trans>
1751 + </entry>
1752 + <entry>
1753 + <base>NETWORKSHARE</base>
1754 + <trans>Network share</trans>
1755 + </entry>
1756 + <entry>
1757 + <base>UNMOUNTED</base>
1758 + <trans>Unmounted</trans>
1759 + </entry>
1760 + <entry>
1761 + <base>DESCRIPTION_RESTORE_DATE</base>
1762 + <trans>Enter the date of the archive you wish to restore from. Format: [ yyyy.mm.dd ]</trans>
1763 + </entry>
1764 + <entry>
1765 + <base>LABEL_RESTORE_DATE</base>
1766 + <trans>Date</trans>
1767 + </entry>
1768 + <entry>
1769 + <base>DESCRIPTION_RESTORE_DR</base>
1770 + <trans><![CDATA[ <P>To perform a full disaster recovery restore set the following:</P> <P><B>Disaster Recovery</B> [ Enabled ] <B>Restore</B> [ *.* ] <B>Restore to</B> [ / ]</P> <P>Note: After completion of a full disaster recovery restore, you will need to enter the server-manager <B>Reboot or shutdown</B> panel and <B>Reconfigure</B> your P> <P>To perform a selective restore, enter one restore path per line. Paths must be relative. Example: To restore /root/contribs to the original location you would therefore enter:</P> <P><B>Disaster Recovery</B> [ Disabled ] <B>Restore</B> [ root/contribs ] <B>Restore to</B> [ / ]</P> ]]></trans>
1771 + </entry>
1772 + <entry>
1773 + <base>LABEL_RESTORE_DR</base>
1774 + <trans>Disaster Recovery</trans>
1775 + </entry>
1776 + <entry>
1777 + <base>LABEL_RESTORE</base>
1778 + <trans>Restore</trans>
1779 + </entry>
1780 + <entry>
1781 + <base>LABEL_RESTORE_RESTORETO</base>
1782 + <trans>Restore to</trans>
1783 + </entry>
1784 + <entry>
1785 + <base>DESCRIPTION_JOBNAME</base>
1786 + <trans>Enter a unique backup job name. The name should contain only letters, numbers, periods, hyphens and underscores. No spaces.</trans>
1787 + </entry>
1788 + <entry>
1789 + <base>DESCRIPTION_DESC</base>
1790 + <trans>Enter a description for this backup job.</trans>
1791 + </entry>
1792 + <entry>
1793 + <base>DESCRIPTION_DR</base>
1794 + <trans>A Disaster Recovery backup job runs additional system processes during backup and restore events. Please set to Disabled if performing a standard backup.</trans>
1795 + </entry>
1796 + <entry>
1797 + <base>DESCRIPTION_BACKUP</base>
1798 + <trans>All backup selections needed to perform a Disaster Recovery are preset below. Note absolute paths are invalid. All paths must be relative to the base / directory. Example: [home] is relative/correct, [/home] is absolute/incorrect. If you are a performing a standard backup, edit the backup selections as required below. One entry per line. Do not enter [ /,/blah,proc,tmp ].</trans>
1799 + </entry>
1800 + <entry>
1801 + <base>DESCRIPTION_EXCLUDE</base>
1802 + <trans>Enter any file exclusions. Example: [ home/e-smith/files/ibays/ibayname/files/document.doc ]. One entry per line. Wildcards * and ? are valid.</trans>
1803 + </entry>
1804 + <entry>
1805 + <base>DESCRIPTION_PRUNE</base>
1806 + <trans>Enter any directory tree to prune and not include in the backup. Example: [ home/e-smith/files/ibays/ibayname ]. One entry per line. Wildcards * and ? valid.</trans>
1807 + </entry>
1808 + <entry>
1809 + <base>DESCRIPTION_TARGET</base>
1810 + <trans><![CDATA[ <P>Valid targets are an attached local drive or network share.</P> <P>If backing up to an attached local drive, enter the target mount point of your drive. Example: [/media/usbdisk]. Leave the username and password fields blank.</P> <P>If backing up to a network share, enter the target in UNC format. Example: [//computername/sharename]. In addition you must enter a valid username/password that is a local account on the target with full access rights to the share.</P> ]]></trans>
1811 + </entry>
1812 + <entry>
1813 + <base>DESCRIPTION_VFSTYPE</base>
1814 + <trans>Three file systems are supported. [ext3] for backup to local attached disk. [smbfs] for backup to Windows workstation and SME Server network shares. [cifs] for backup to Microsoft Windows Server. Note if using cifs, target entry above must use IP address. Example: [//10.1.1.1/sharename].</trans>
1815 + </entry>
1816 + <entry>
1817 + <base>DESCRIPTION_SLICE</base>
1818 + <trans>Enter the backup volume segment slices in megabytes. As an example to create 650MB volume segments for copying to CDR/RW you would enter [ 650 ]. This would create in the target files of the following format: job.yyyy.mm.dd.1.dar, job.yyyy.mm.dd.2.dar, etcetera. Note the maximum segment size is 2000MB. Total backup job size is limited only by available target free space.</trans>
1819 + </entry>
1820 + <entry>
1821 + <base>DESCRIPTION_COMPRESSION</base>
1822 + <trans>Enter the compression level from 0 (none) to 9 (maximum). No compression dramitcally improves backup speed.</trans>
1823 + </entry>
1824 + <entry>
1825 + <base>DESCRIPTION_U_P</base>
1826 + <trans>If backing up to a network share, enter a valid username/password that is a local account on the target with full access rights to the share. Leave the username and password blank if backing up to an attached local drive.</trans>
1827 + </entry>
1828 + <entry>
1829 + <base>DESCRIPTION_EXPIRY</base>
1830 + <trans>Enter a backup expiry time. This will keep backups on the target for n days. Choosing 0 means backups are overwritten every day.</trans>
1831 + </entry>
1832 + <entry>
1833 + <base>DESCRIPTION_VERBOSE</base>
1834 + <trans>Verbose option sets the output detail. On for full file-by-file listing and log file generated. Off for summary details only and no log file generated. Note if enabled size of output files is related to size of backup job and therefore can become quite large! Scheduled jobs will receive an e-mail to admin of job details.</trans>
1835 + </entry>
1836 + <entry>
1837 + <base>DESCRIPTION_BACKUP_DAY</base>
1838 + <trans>Enter the day you would like this backup to occur. Leave manual for unscheduled manual use.</trans>
1839 + </entry>
1840 + <entry>
1841 + <base>DESCRIPTION_BACKUP_TIME</base>
1842 + <trans>Enter the time you would like this backup to occur in 24 hr (hh:mm) format.</trans>
1843 + </entry>
1844 +</lexicon>
1845 --- /dev/null 2008-04-15 08:20:57.914268019 -0600
1846 +++ pootleupdate/root/etc/e-smith/locale/it/etc/e-smith/web/functions/dar2 2008-04-20 21:00:05.000000000 -0600
1847 @@ -0,0 +1,235 @@
1848 +<lexicon lang="it">
1849 + <entry>
1850 + <base>SAVE</base>
1851 + <trans>Salva</trans>
1852 + </entry>
1853 + <entry>
1854 + <base>PERFORM</base>
1855 + <trans>Perform</trans>
1856 + </entry>
1857 + <entry>
1858 + <base>FORM_TITLE</base>
1859 + <trans>Disk ARchive</trans>
1860 + </entry>
1861 + <entry>
1862 + <base>OPERATION_STATUS_REPORT</base>
1863 + <trans>Rapporto operazione</trans>
1864 + </entry>
1865 + <entry>
1866 + <base>FORM_DESCRIPTION</base>
1867 + <trans><![CDATA[ <p>Use this panel to define, schedule and launch server backups and restores, to and from network shares or an attached local disk.</p> <p><a class="button-like" href="dar2?page=0&page_stack=&Next=Next&wherenext=DAR2_PAGE_CREATE">Create backup job</a></p> ]]></trans>
1868 + </entry>
1869 + <entry>
1870 + <base>NO_BACKUP_JOBS</base>
1871 + <trans>There are no backup jobs in the system.</trans>
1872 + </entry>
1873 + <entry>
1874 + <base>LABEL_ACTION</base>
1875 + <trans>Azione</trans>
1876 + </entry>
1877 + <entry>
1878 + <base>MODIFY</base>
1879 + <trans>View/Modify</trans>
1880 + </entry>
1881 + <entry>
1882 + <base>BACKUP</base>
1883 + <trans>Backup</trans>
1884 + </entry>
1885 + <entry>
1886 + <base>REMOVE</base>
1887 + <trans>Rimuovi</trans>
1888 + </entry>
1889 + <entry>
1890 + <base>CREATE_TITLE</base>
1891 + <trans>Create backup job</trans>
1892 + </entry>
1893 + <entry>
1894 + <base>MODIFY_TITLE</base>
1895 + <trans>Modify backup job</trans>
1896 + </entry>
1897 + <entry>
1898 + <base>RESTORE_TITLE</base>
1899 + <trans>Restore backup job</trans>
1900 + </entry>
1901 + <entry>
1902 + <base>BACKUP_TITLE</base>
1903 + <trans>Launch backup job</trans>
1904 + </entry>
1905 + <entry>
1906 + <base>REMOVE_TITLE</base>
1907 + <trans>Remove backup job</trans>
1908 + </entry>
1909 + <entry>
1910 + <base>LABEL_JOBNAME</base>
1911 + <trans>Job name</trans>
1912 + </entry>
1913 + <entry>
1914 + <base>LABEL_DESTINATION</base>
1915 + <trans>Destination</trans>
1916 + </entry>
1917 + <entry>
1918 + <base>LABEL_BACKUP</base>
1919 + <trans>Backup selections</trans>
1920 + </entry>
1921 + <entry>
1922 + <base>LABEL_EXCLUDE</base>
1923 + <trans>Exclude files</trans>
1924 + </entry>
1925 + <entry>
1926 + <base>LABEL_PRUNE</base>
1927 + <trans>Prune directories</trans>
1928 + </entry>
1929 + <entry>
1930 + <base>LABEL_TARGET</base>
1931 + <trans>Target</trans>
1932 + </entry>
1933 + <entry>
1934 + <base>LABEL_SLICE</base>
1935 + <trans>Slice size</trans>
1936 + </entry>
1937 + <entry>
1938 + <base>LABEL_VFSTYPE</base>
1939 + <trans>File system</trans>
1940 + </entry>
1941 +
1942 + <entry>
1943 + <base>LABEL_COMPRESSION</base>
1944 + <trans>Compression</trans>
1945 + </entry>
1946 + <entry>
1947 + <base>LABEL_USERNAME</base>
1948 + <trans>Nome utente</trans>
1949 + </entry>
1950 + <entry>
1951 + <base>LABEL_PASSWORD</base>
1952 + <trans>Password</trans>
1953 + </entry>
1954 + <entry>
1955 + <base>LABEL_DESCRIPTION</base>
1956 + <trans>Descrizione</trans>
1957 + </entry>
1958 + <entry>
1959 + <base>LABEL_EXPIRY</base>
1960 + <trans>Expiry</trans>
1961 + </entry>
1962 + <entry>
1963 + <base>LABEL_VERBOSE</base>
1964 + <trans>Verbose</trans>
1965 + </entry>
1966 + <entry>
1967 + <base>LABEL_BACKUP_DAY</base>
1968 + <trans>Backup day</trans>
1969 + </entry>
1970 + <entry>
1971 + <base>LABEL_BACKUP_TIME</base>
1972 + <trans>Backup time</trans>
1973 + </entry>
1974 + <entry>
1975 + <base>DISABLED</base>
1976 + <trans>Disabilitato</trans>
1977 + </entry>
1978 + <entry>
1979 + <base>ENABLED</base>
1980 + <trans>Abilitato</trans>
1981 + </entry>
1982 + <entry>
1983 + <base>LOCALDRIVE</base>
1984 + <trans>Local drive</trans>
1985 + </entry>
1986 + <entry>
1987 + <base>MOUNTED</base>
1988 + <trans>Mounted</trans>
1989 + </entry>
1990 + <entry>
1991 + <base>NETWORKSHARE</base>
1992 + <trans>Network share</trans>
1993 + </entry>
1994 + <entry>
1995 + <base>UNMOUNTED</base>
1996 + <trans>Unmounted</trans>
1997 + </entry>
1998 + <entry>
1999 + <base>DESCRIPTION_RESTORE_DATE</base>
2000 + <trans>Enter the date of the archive you wish to restore from. Format: [ yyyy.mm.dd ]</trans>
2001 + </entry>
2002 + <entry>
2003 + <base>LABEL_RESTORE_DATE</base>
2004 + <trans>Date</trans>
2005 + </entry>
2006 + <entry>
2007 + <base>DESCRIPTION_RESTORE_DR</base>
2008 + <trans><![CDATA[ <P>To perform a full disaster recovery restore set the following:</P> <P><B>Disaster Recovery</B> [ Enabled ] <B>Restore</B> [ *.* ] <B>Restore to</B> [ / ]</P> <P>Note: After completion of a full disaster recovery restore, you will need to enter the server-manager <B>Reboot or shutdown</B> panel and <B>Reconfigure</B> your P> <P>To perform a selective restore, enter one restore path per line. Paths must be relative. Example: To restore /root/contribs to the original location you would therefore enter:</P> <P><B>Disaster Recovery</B> [ Disabled ] <B>Restore</B> [ root/contribs ] <B>Restore to</B> [ / ]</P> ]]></trans>
2009 + </entry>
2010 + <entry>
2011 + <base>LABEL_RESTORE_DR</base>
2012 + <trans>Disaster Recovery</trans>
2013 + </entry>
2014 + <entry>
2015 + <base>LABEL_RESTORE</base>
2016 + <trans>Ripristina</trans>
2017 + </entry>
2018 + <entry>
2019 + <base>LABEL_RESTORE_RESTORETO</base>
2020 + <trans>Restore to</trans>
2021 + </entry>
2022 + <entry>
2023 + <base>DESCRIPTION_JOBNAME</base>
2024 + <trans>Enter a unique backup job name. The name should contain only letters, numbers, periods, hyphens and underscores. No spaces.</trans>
2025 + </entry>
2026 + <entry>
2027 + <base>DESCRIPTION_DESC</base>
2028 + <trans>Enter a description for this backup job.</trans>
2029 + </entry>
2030 + <entry>
2031 + <base>DESCRIPTION_DR</base>
2032 + <trans>A Disaster Recovery backup job runs additional system processes during backup and restore events. Please set to Disabled if performing a standard backup.</trans>
2033 + </entry>
2034 + <entry>
2035 + <base>DESCRIPTION_BACKUP</base>
2036 + <trans>All backup selections needed to perform a Disaster Recovery are preset below. Note absolute paths are invalid. All paths must be relative to the base / directory. Example: [home] is relative/correct, [/home] is absolute/incorrect. If you are a performing a standard backup, edit the backup selections as required below. One entry per line. Do not enter [ /,/blah,proc,tmp ].</trans>
2037 + </entry>
2038 + <entry>
2039 + <base>DESCRIPTION_EXCLUDE</base>
2040 + <trans>Enter any file exclusions. Example: [ home/e-smith/files/ibays/ibayname/files/document.doc ]. One entry per line. Wildcards * and ? are valid.</trans>
2041 + </entry>
2042 + <entry>
2043 + <base>DESCRIPTION_PRUNE</base>
2044 + <trans>Enter any directory tree to prune and not include in the backup. Example: [ home/e-smith/files/ibays/ibayname ]. One entry per line. Wildcards * and ? valid.</trans>
2045 + </entry>
2046 + <entry>
2047 + <base>DESCRIPTION_TARGET</base>
2048 + <trans><![CDATA[ <P>Valid targets are an attached local drive or network share.</P> <P>If backing up to an attached local drive, enter the target mount point of your drive. Example: [/media/usbdisk]. Leave the username and password fields blank.</P> <P>If backing up to a network share, enter the target in UNC format. Example: [//computername/sharename]. In addition you must enter a valid username/password that is a local account on the target with full access rights to the share.</P> ]]></trans>
2049 + </entry>
2050 + <entry>
2051 + <base>DESCRIPTION_VFSTYPE</base>
2052 + <trans>Three file systems are supported. [ext3] for backup to local attached disk. [smbfs] for backup to Windows workstation and SME Server network shares. [cifs] for backup to Microsoft Windows Server. Note if using cifs, target entry above must use IP address. Example: [//10.1.1.1/sharename].</trans>
2053 + </entry>
2054 + <entry>
2055 + <base>DESCRIPTION_SLICE</base>
2056 + <trans>Enter the backup volume segment slices in megabytes. As an example to create 650MB volume segments for copying to CDR/RW you would enter [ 650 ]. This would create in the target files of the following format: job.yyyy.mm.dd.1.dar, job.yyyy.mm.dd.2.dar, etcetera. Note the maximum segment size is 2000MB. Total backup job size is limited only by available target free space.</trans>
2057 + </entry>
2058 + <entry>
2059 + <base>DESCRIPTION_COMPRESSION</base>
2060 + <trans>Enter the compression level from 0 (none) to 9 (maximum). No compression dramitcally improves backup speed.</trans>
2061 + </entry>
2062 + <entry>
2063 + <base>DESCRIPTION_U_P</base>
2064 + <trans>If backing up to a network share, enter a valid username/password that is a local account on the target with full access rights to the share. Leave the username and password blank if backing up to an attached local drive.</trans>
2065 + </entry>
2066 + <entry>
2067 + <base>DESCRIPTION_EXPIRY</base>
2068 + <trans>Enter a backup expiry time. This will keep backups on the target for n days. Choosing 0 means backups are overwritten every day.</trans>
2069 + </entry>
2070 + <entry>
2071 + <base>DESCRIPTION_VERBOSE</base>
2072 + <trans>Verbose option sets the output detail. On for full file-by-file listing and log file generated. Off for summary details only and no log file generated. Note if enabled size of output files is related to size of backup job and therefore can become quite large! Scheduled jobs will receive an e-mail to admin of job details.</trans>
2073 + </entry>
2074 + <entry>
2075 + <base>DESCRIPTION_BACKUP_DAY</base>
2076 + <trans>Enter the day you would like this backup to occur. Leave manual for unscheduled manual use.</trans>
2077 + </entry>
2078 + <entry>
2079 + <base>DESCRIPTION_BACKUP_TIME</base>
2080 + <trans>Enter the time you would like this backup to occur in 24 hr (hh:mm) format.</trans>
2081 + </entry>
2082 +</lexicon>
2083 --- /dev/null 2008-04-15 08:20:57.914268019 -0600
2084 +++ pootleupdate/root/etc/e-smith/locale/nl/etc/e-smith/web/functions/dar2 2008-04-20 21:00:56.000000000 -0600
2085 @@ -0,0 +1,235 @@
2086 +<lexicon lang="nl">
2087 + <entry>
2088 + <base>SAVE</base>
2089 + <trans>Opslaan</trans>
2090 + </entry>
2091 + <entry>
2092 + <base>PERFORM</base>
2093 + <trans>Uitvoeren</trans>
2094 + </entry>
2095 + <entry>
2096 + <base>FORM_TITLE</base>
2097 + <trans>Disk ARchive</trans>
2098 + </entry>
2099 + <entry>
2100 + <base>OPERATION_STATUS_REPORT</base>
2101 + <trans>Operationeel status rapport</trans>
2102 + </entry>
2103 + <entry>
2104 + <base>FORM_DESCRIPTION</base>
2105 + <trans><![CDATA[ <p>Use this panel to define, schedule and launch server backups and restores, to and from network shares or an attached local disk.</p> <p><a class="button-like" href="dar2?page=0&page_stack=&Next=Next&wherenext=DAR2_PAGE_CREATE">Create backup job</a></p> ]]></trans>
2106 + </entry>
2107 + <entry>
2108 + <base>NO_BACKUP_JOBS</base>
2109 + <trans>There are no backup jobs in the system.</trans>
2110 + </entry>
2111 + <entry>
2112 + <base>LABEL_ACTION</base>
2113 + <trans>Actie</trans>
2114 + </entry>
2115 + <entry>
2116 + <base>MODIFY</base>
2117 + <trans>View/Modify</trans>
2118 + </entry>
2119 + <entry>
2120 + <base>BACKUP</base>
2121 + <trans>Veilig stellen</trans>
2122 + </entry>
2123 + <entry>
2124 + <base>REMOVE</base>
2125 + <trans>Verwijderen</trans>
2126 + </entry>
2127 + <entry>
2128 + <base>CREATE_TITLE</base>
2129 + <trans>Create backup job</trans>
2130 + </entry>
2131 + <entry>
2132 + <base>MODIFY_TITLE</base>
2133 + <trans>Modify backup job</trans>
2134 + </entry>
2135 + <entry>
2136 + <base>RESTORE_TITLE</base>
2137 + <trans>Restore backup job</trans>
2138 + </entry>
2139 + <entry>
2140 + <base>BACKUP_TITLE</base>
2141 + <trans>Launch backup job</trans>
2142 + </entry>
2143 + <entry>
2144 + <base>REMOVE_TITLE</base>
2145 + <trans>Remove backup job</trans>
2146 + </entry>
2147 + <entry>
2148 + <base>LABEL_JOBNAME</base>
2149 + <trans>Job name</trans>
2150 + </entry>
2151 + <entry>
2152 + <base>LABEL_DESTINATION</base>
2153 + <trans>Bestemming</trans>
2154 + </entry>
2155 + <entry>
2156 + <base>LABEL_BACKUP</base>
2157 + <trans>Backup selections</trans>
2158 + </entry>
2159 + <entry>
2160 + <base>LABEL_EXCLUDE</base>
2161 + <trans>Exclude files</trans>
2162 + </entry>
2163 + <entry>
2164 + <base>LABEL_PRUNE</base>
2165 + <trans>Prune directories</trans>
2166 + </entry>
2167 + <entry>
2168 + <base>LABEL_TARGET</base>
2169 + <trans>Target</trans>
2170 + </entry>
2171 + <entry>
2172 + <base>LABEL_SLICE</base>
2173 + <trans>Slice size</trans>
2174 + </entry>
2175 + <entry>
2176 + <base>LABEL_VFSTYPE</base>
2177 + <trans>File system</trans>
2178 + </entry>
2179 +
2180 + <entry>
2181 + <base>LABEL_COMPRESSION</base>
2182 + <trans>Compression</trans>
2183 + </entry>
2184 + <entry>
2185 + <base>LABEL_USERNAME</base>
2186 + <trans>Gebruikersnaam</trans>
2187 + </entry>
2188 + <entry>
2189 + <base>LABEL_PASSWORD</base>
2190 + <trans>Wachtwoord</trans>
2191 + </entry>
2192 + <entry>
2193 + <base>LABEL_DESCRIPTION</base>
2194 + <trans>Beschrijving</trans>
2195 + </entry>
2196 + <entry>
2197 + <base>LABEL_EXPIRY</base>
2198 + <trans>Expiry</trans>
2199 + </entry>
2200 + <entry>
2201 + <base>LABEL_VERBOSE</base>
2202 + <trans>Verbose</trans>
2203 + </entry>
2204 + <entry>
2205 + <base>LABEL_BACKUP_DAY</base>
2206 + <trans>Backup day</trans>
2207 + </entry>
2208 + <entry>
2209 + <base>LABEL_BACKUP_TIME</base>
2210 + <trans>Backup time</trans>
2211 + </entry>
2212 + <entry>
2213 + <base>DISABLED</base>
2214 + <trans>Inactief</trans>
2215 + </entry>
2216 + <entry>
2217 + <base>ENABLED</base>
2218 + <trans>Actief</trans>
2219 + </entry>
2220 + <entry>
2221 + <base>LOCALDRIVE</base>
2222 + <trans>Local drive</trans>
2223 + </entry>
2224 + <entry>
2225 + <base>MOUNTED</base>
2226 + <trans>Mounted</trans>
2227 + </entry>
2228 + <entry>
2229 + <base>NETWORKSHARE</base>
2230 + <trans>Network share</trans>
2231 + </entry>
2232 + <entry>
2233 + <base>UNMOUNTED</base>
2234 + <trans>Unmounted</trans>
2235 + </entry>
2236 + <entry>
2237 + <base>DESCRIPTION_RESTORE_DATE</base>
2238 + <trans>Enter the date of the archive you wish to restore from. Format: [ yyyy.mm.dd ]</trans>
2239 + </entry>
2240 + <entry>
2241 + <base>LABEL_RESTORE_DATE</base>
2242 + <trans>Date</trans>
2243 + </entry>
2244 + <entry>
2245 + <base>DESCRIPTION_RESTORE_DR</base>
2246 + <trans><![CDATA[ <P>To perform a full disaster recovery restore set the following:</P> <P><B>Disaster Recovery</B> [ Enabled ] <B>Restore</B> [ *.* ] <B>Restore to</B> [ / ]</P> <P>Note: After completion of a full disaster recovery restore, you will need to enter the server-manager <B>Reboot or shutdown</B> panel and <B>Reconfigure</B> your P> <P>To perform a selective restore, enter one restore path per line. Paths must be relative. Example: To restore /root/contribs to the original location you would therefore enter:</P> <P><B>Disaster Recovery</B> [ Disabled ] <B>Restore</B> [ root/contribs ] <B>Restore to</B> [ / ]</P> ]]></trans>
2247 + </entry>
2248 + <entry>
2249 + <base>LABEL_RESTORE_DR</base>
2250 + <trans>Disaster Recovery</trans>
2251 + </entry>
2252 + <entry>
2253 + <base>LABEL_RESTORE</base>
2254 + <trans>Herstellen</trans>
2255 + </entry>
2256 + <entry>
2257 + <base>LABEL_RESTORE_RESTORETO</base>
2258 + <trans>Restore to</trans>
2259 + </entry>
2260 + <entry>
2261 + <base>DESCRIPTION_JOBNAME</base>
2262 + <trans>Enter a unique backup job name. The name should contain only letters, numbers, periods, hyphens and underscores. No spaces.</trans>
2263 + </entry>
2264 + <entry>
2265 + <base>DESCRIPTION_DESC</base>
2266 + <trans>Enter a description for this backup job.</trans>
2267 + </entry>
2268 + <entry>
2269 + <base>DESCRIPTION_DR</base>
2270 + <trans>A Disaster Recovery backup job runs additional system processes during backup and restore events. Please set to Disabled if performing a standard backup.</trans>
2271 + </entry>
2272 + <entry>
2273 + <base>DESCRIPTION_BACKUP</base>
2274 + <trans>All backup selections needed to perform a Disaster Recovery are preset below. Note absolute paths are invalid. All paths must be relative to the base / directory. Example: [home] is relative/correct, [/home] is absolute/incorrect. If you are a performing a standard backup, edit the backup selections as required below. One entry per line. Do not enter [ /,/blah,proc,tmp ].</trans>
2275 + </entry>
2276 + <entry>
2277 + <base>DESCRIPTION_EXCLUDE</base>
2278 + <trans>Enter any file exclusions. Example: [ home/e-smith/files/ibays/ibayname/files/document.doc ]. One entry per line. Wildcards * and ? are valid.</trans>
2279 + </entry>
2280 + <entry>
2281 + <base>DESCRIPTION_PRUNE</base>
2282 + <trans>Enter any directory tree to prune and not include in the backup. Example: [ home/e-smith/files/ibays/ibayname ]. One entry per line. Wildcards * and ? valid.</trans>
2283 + </entry>
2284 + <entry>
2285 + <base>DESCRIPTION_TARGET</base>
2286 + <trans><![CDATA[ <P>Valid targets are an attached local drive or network share.</P> <P>If backing up to an attached local drive, enter the target mount point of your drive. Example: [/media/usbdisk]. Leave the username and password fields blank.</P> <P>If backing up to a network share, enter the target in UNC format. Example: [//computername/sharename]. In addition you must enter a valid username/password that is a local account on the target with full access rights to the share.</P> ]]></trans>
2287 + </entry>
2288 + <entry>
2289 + <base>DESCRIPTION_VFSTYPE</base>
2290 + <trans>Three file systems are supported. [ext3] for backup to local attached disk. [smbfs] for backup to Windows workstation and SME Server network shares. [cifs] for backup to Microsoft Windows Server. Note if using cifs, target entry above must use IP address. Example: [//10.1.1.1/sharename].</trans>
2291 + </entry>
2292 + <entry>
2293 + <base>DESCRIPTION_SLICE</base>
2294 + <trans>Enter the backup volume segment slices in megabytes. As an example to create 650MB volume segments for copying to CDR/RW you would enter [ 650 ]. This would create in the target files of the following format: job.yyyy.mm.dd.1.dar, job.yyyy.mm.dd.2.dar, etcetera. Note the maximum segment size is 2000MB. Total backup job size is limited only by available target free space.</trans>
2295 + </entry>
2296 + <entry>
2297 + <base>DESCRIPTION_COMPRESSION</base>
2298 + <trans>Enter the compression level from 0 (none) to 9 (maximum). No compression dramitcally improves backup speed.</trans>
2299 + </entry>
2300 + <entry>
2301 + <base>DESCRIPTION_U_P</base>
2302 + <trans>If backing up to a network share, enter a valid username/password that is a local account on the target with full access rights to the share. Leave the username and password blank if backing up to an attached local drive.</trans>
2303 + </entry>
2304 + <entry>
2305 + <base>DESCRIPTION_EXPIRY</base>
2306 + <trans>Enter a backup expiry time. This will keep backups on the target for n days. Choosing 0 means backups are overwritten every day.</trans>
2307 + </entry>
2308 + <entry>
2309 + <base>DESCRIPTION_VERBOSE</base>
2310 + <trans>Verbose option sets the output detail. On for full file-by-file listing and log file generated. Off for summary details only and no log file generated. Note if enabled size of output files is related to size of backup job and therefore can become quite large! Scheduled jobs will receive an e-mail to admin of job details.</trans>
2311 + </entry>
2312 + <entry>
2313 + <base>DESCRIPTION_BACKUP_DAY</base>
2314 + <trans>Enter the day you would like this backup to occur. Leave manual for unscheduled manual use.</trans>
2315 + </entry>
2316 + <entry>
2317 + <base>DESCRIPTION_BACKUP_TIME</base>
2318 + <trans>Enter the time you would like this backup to occur in 24 hr (hh:mm) format.</trans>
2319 + </entry>
2320 +</lexicon>
2321 --- /dev/null 2008-04-15 08:20:57.914268019 -0600
2322 +++ pootleupdate/root/etc/e-smith/locale/pt_BR/etc/e-smith/web/functions/dar2 2008-04-20 21:01:48.000000000 -0600
2323 @@ -0,0 +1,235 @@
2324 +<lexicon lang="pt_BR">
2325 + <entry>
2326 + <base>SAVE</base>
2327 + <trans>Salvar</trans>
2328 + </entry>
2329 + <entry>
2330 + <base>PERFORM</base>
2331 + <trans>Executar</trans>
2332 + </entry>
2333 + <entry>
2334 + <base>FORM_TITLE</base>
2335 + <trans>Disk ARchive</trans>
2336 + </entry>
2337 + <entry>
2338 + <base>OPERATION_STATUS_REPORT</base>
2339 + <trans>Relarório de status de operação</trans>
2340 + </entry>
2341 + <entry>
2342 + <base>FORM_DESCRIPTION</base>
2343 + <trans><![CDATA[ <p>Use this panel to define, schedule and launch server backups and restores, to and from network shares or an attached local disk.</p> <p><a class="button-like" href="dar2?page=0&page_stack=&Next=Next&wherenext=DAR2_PAGE_CREATE">Create backup job</a></p> ]]></trans>
2344 + </entry>
2345 + <entry>
2346 + <base>NO_BACKUP_JOBS</base>
2347 + <trans>There are no backup jobs in the system.</trans>
2348 + </entry>
2349 + <entry>
2350 + <base>LABEL_ACTION</base>
2351 + <trans>Ação</trans>
2352 + </entry>
2353 + <entry>
2354 + <base>MODIFY</base>
2355 + <trans>View/Modify</trans>
2356 + </entry>
2357 + <entry>
2358 + <base>BACKUP</base>
2359 + <trans>Backup</trans>
2360 + </entry>
2361 + <entry>
2362 + <base>REMOVE</base>
2363 + <trans>Remover</trans>
2364 + </entry>
2365 + <entry>
2366 + <base>CREATE_TITLE</base>
2367 + <trans>Create backup job</trans>
2368 + </entry>
2369 + <entry>
2370 + <base>MODIFY_TITLE</base>
2371 + <trans>Modify backup job</trans>
2372 + </entry>
2373 + <entry>
2374 + <base>RESTORE_TITLE</base>
2375 + <trans>Restore backup job</trans>
2376 + </entry>
2377 + <entry>
2378 + <base>BACKUP_TITLE</base>
2379 + <trans>Launch backup job</trans>
2380 + </entry>
2381 + <entry>
2382 + <base>REMOVE_TITLE</base>
2383 + <trans>Remove backup job</trans>
2384 + </entry>
2385 + <entry>
2386 + <base>LABEL_JOBNAME</base>
2387 + <trans>Job name</trans>
2388 + </entry>
2389 + <entry>
2390 + <base>LABEL_DESTINATION</base>
2391 + <trans>Destino</trans>
2392 + </entry>
2393 + <entry>
2394 + <base>LABEL_BACKUP</base>
2395 + <trans>Backup selections</trans>
2396 + </entry>
2397 + <entry>
2398 + <base>LABEL_EXCLUDE</base>
2399 + <trans>Exclude files</trans>
2400 + </entry>
2401 + <entry>
2402 + <base>LABEL_PRUNE</base>
2403 + <trans>Prune directories</trans>
2404 + </entry>
2405 + <entry>
2406 + <base>LABEL_TARGET</base>
2407 + <trans>Target</trans>
2408 + </entry>
2409 + <entry>
2410 + <base>LABEL_SLICE</base>
2411 + <trans>Slice size</trans>
2412 + </entry>
2413 + <entry>
2414 + <base>LABEL_VFSTYPE</base>
2415 + <trans>File system</trans>
2416 + </entry>
2417 +
2418 + <entry>
2419 + <base>LABEL_COMPRESSION</base>
2420 + <trans>Compression</trans>
2421 + </entry>
2422 + <entry>
2423 + <base>LABEL_USERNAME</base>
2424 + <trans>Nome de usuário</trans>
2425 + </entry>
2426 + <entry>
2427 + <base>LABEL_PASSWORD</base>
2428 + <trans>Senha</trans>
2429 + </entry>
2430 + <entry>
2431 + <base>LABEL_DESCRIPTION</base>
2432 + <trans>Descrição</trans>
2433 + </entry>
2434 + <entry>
2435 + <base>LABEL_EXPIRY</base>
2436 + <trans>Expiry</trans>
2437 + </entry>
2438 + <entry>
2439 + <base>LABEL_VERBOSE</base>
2440 + <trans>Verbose</trans>
2441 + </entry>
2442 + <entry>
2443 + <base>LABEL_BACKUP_DAY</base>
2444 + <trans>Backup day</trans>
2445 + </entry>
2446 + <entry>
2447 + <base>LABEL_BACKUP_TIME</base>
2448 + <trans>Backup time</trans>
2449 + </entry>
2450 + <entry>
2451 + <base>DISABLED</base>
2452 + <trans>Desabilitado</trans>
2453 + </entry>
2454 + <entry>
2455 + <base>ENABLED</base>
2456 + <trans>Habilitado</trans>
2457 + </entry>
2458 + <entry>
2459 + <base>LOCALDRIVE</base>
2460 + <trans>Local drive</trans>
2461 + </entry>
2462 + <entry>
2463 + <base>MOUNTED</base>
2464 + <trans>Mounted</trans>
2465 + </entry>
2466 + <entry>
2467 + <base>NETWORKSHARE</base>
2468 + <trans>Network share</trans>
2469 + </entry>
2470 + <entry>
2471 + <base>UNMOUNTED</base>
2472 + <trans>Unmounted</trans>
2473 + </entry>
2474 + <entry>
2475 + <base>DESCRIPTION_RESTORE_DATE</base>
2476 + <trans>Enter the date of the archive you wish to restore from. Format: [ yyyy.mm.dd ]</trans>
2477 + </entry>
2478 + <entry>
2479 + <base>LABEL_RESTORE_DATE</base>
2480 + <trans>Date</trans>
2481 + </entry>
2482 + <entry>
2483 + <base>DESCRIPTION_RESTORE_DR</base>
2484 + <trans><![CDATA[ <P>To perform a full disaster recovery restore set the following:</P> <P><B>Disaster Recovery</B> [ Enabled ] <B>Restore</B> [ *.* ] <B>Restore to</B> [ / ]</P> <P>Note: After completion of a full disaster recovery restore, you will need to enter the server-manager <B>Reboot or shutdown</B> panel and <B>Reconfigure</B> your P> <P>To perform a selective restore, enter one restore path per line. Paths must be relative. Example: To restore /root/contribs to the original location you would therefore enter:</P> <P><B>Disaster Recovery</B> [ Disabled ] <B>Restore</B> [ root/contribs ] <B>Restore to</B> [ / ]</P> ]]></trans>
2485 + </entry>
2486 + <entry>
2487 + <base>LABEL_RESTORE_DR</base>
2488 + <trans>Disaster Recovery</trans>
2489 + </entry>
2490 + <entry>
2491 + <base>LABEL_RESTORE</base>
2492 + <trans>Restaurar</trans>
2493 + </entry>
2494 + <entry>
2495 + <base>LABEL_RESTORE_RESTORETO</base>
2496 + <trans>Restore to</trans>
2497 + </entry>
2498 + <entry>
2499 + <base>DESCRIPTION_JOBNAME</base>
2500 + <trans>Enter a unique backup job name. The name should contain only letters, numbers, periods, hyphens and underscores. No spaces.</trans>
2501 + </entry>
2502 + <entry>
2503 + <base>DESCRIPTION_DESC</base>
2504 + <trans>Enter a description for this backup job.</trans>
2505 + </entry>
2506 + <entry>
2507 + <base>DESCRIPTION_DR</base>
2508 + <trans>A Disaster Recovery backup job runs additional system processes during backup and restore events. Please set to Disabled if performing a standard backup.</trans>
2509 + </entry>
2510 + <entry>
2511 + <base>DESCRIPTION_BACKUP</base>
2512 + <trans>All backup selections needed to perform a Disaster Recovery are preset below. Note absolute paths are invalid. All paths must be relative to the base / directory. Example: [home] is relative/correct, [/home] is absolute/incorrect. If you are a performing a standard backup, edit the backup selections as required below. One entry per line. Do not enter [ /,/blah,proc,tmp ].</trans>
2513 + </entry>
2514 + <entry>
2515 + <base>DESCRIPTION_EXCLUDE</base>
2516 + <trans>Enter any file exclusions. Example: [ home/e-smith/files/ibays/ibayname/files/document.doc ]. One entry per line. Wildcards * and ? are valid.</trans>
2517 + </entry>
2518 + <entry>
2519 + <base>DESCRIPTION_PRUNE</base>
2520 + <trans>Enter any directory tree to prune and not include in the backup. Example: [ home/e-smith/files/ibays/ibayname ]. One entry per line. Wildcards * and ? valid.</trans>
2521 + </entry>
2522 + <entry>
2523 + <base>DESCRIPTION_TARGET</base>
2524 + <trans><![CDATA[ <P>Valid targets are an attached local drive or network share.</P> <P>If backing up to an attached local drive, enter the target mount point of your drive. Example: [/media/usbdisk]. Leave the username and password fields blank.</P> <P>If backing up to a network share, enter the target in UNC format. Example: [//computername/sharename]. In addition you must enter a valid username/password that is a local account on the target with full access rights to the share.</P> ]]></trans>
2525 + </entry>
2526 + <entry>
2527 + <base>DESCRIPTION_VFSTYPE</base>
2528 + <trans>Three file systems are supported. [ext3] for backup to local attached disk. [smbfs] for backup to Windows workstation and SME Server network shares. [cifs] for backup to Microsoft Windows Server. Note if using cifs, target entry above must use IP address. Example: [//10.1.1.1/sharename].</trans>
2529 + </entry>
2530 + <entry>
2531 + <base>DESCRIPTION_SLICE</base>
2532 + <trans>Enter the backup volume segment slices in megabytes. As an example to create 650MB volume segments for copying to CDR/RW you would enter [ 650 ]. This would create in the target files of the following format: job.yyyy.mm.dd.1.dar, job.yyyy.mm.dd.2.dar, etcetera. Note the maximum segment size is 2000MB. Total backup job size is limited only by available target free space.</trans>
2533 + </entry>
2534 + <entry>
2535 + <base>DESCRIPTION_COMPRESSION</base>
2536 + <trans>Enter the compression level from 0 (none) to 9 (maximum). No compression dramitcally improves backup speed.</trans>
2537 + </entry>
2538 + <entry>
2539 + <base>DESCRIPTION_U_P</base>
2540 + <trans>If backing up to a network share, enter a valid username/password that is a local account on the target with full access rights to the share. Leave the username and password blank if backing up to an attached local drive.</trans>
2541 + </entry>
2542 + <entry>
2543 + <base>DESCRIPTION_EXPIRY</base>
2544 + <trans>Enter a backup expiry time. This will keep backups on the target for n days. Choosing 0 means backups are overwritten every day.</trans>
2545 + </entry>
2546 + <entry>
2547 + <base>DESCRIPTION_VERBOSE</base>
2548 + <trans>Verbose option sets the output detail. On for full file-by-file listing and log file generated. Off for summary details only and no log file generated. Note if enabled size of output files is related to size of backup job and therefore can become quite large! Scheduled jobs will receive an e-mail to admin of job details.</trans>
2549 + </entry>
2550 + <entry>
2551 + <base>DESCRIPTION_BACKUP_DAY</base>
2552 + <trans>Enter the day you would like this backup to occur. Leave manual for unscheduled manual use.</trans>
2553 + </entry>
2554 + <entry>
2555 + <base>DESCRIPTION_BACKUP_TIME</base>
2556 + <trans>Enter the time you would like this backup to occur in 24 hr (hh:mm) format.</trans>
2557 + </entry>
2558 +</lexicon>
2559 --- /dev/null 2008-04-15 08:20:57.914268019 -0600
2560 +++ pootleupdate/root/etc/e-smith/locale/sl/etc/e-smith/web/functions/dar2 2008-04-20 21:02:42.000000000 -0600
2561 @@ -0,0 +1,235 @@
2562 +<lexicon lang="sl">
2563 + <entry>
2564 + <base>SAVE</base>
2565 + <trans>Shrani</trans>
2566 + </entry>
2567 + <entry>
2568 + <base>PERFORM</base>
2569 + <trans>Izvedi</trans>
2570 + </entry>
2571 + <entry>
2572 + <base>FORM_TITLE</base>
2573 + <trans>Disk ARchive</trans>
2574 + </entry>
2575 + <entry>
2576 + <base>OPERATION_STATUS_REPORT</base>
2577 + <trans>Porocilo o delovanju</trans>
2578 + </entry>
2579 + <entry>
2580 + <base>FORM_DESCRIPTION</base>
2581 + <trans><![CDATA[ <p>Use this panel to define, schedule and launch server backups and restores, to and from network shares or an attached local disk.</p> <p><a class="button-like" href="dar2?page=0&page_stack=&Next=Next&wherenext=DAR2_PAGE_CREATE">Create backup job</a></p> ]]></trans>
2582 + </entry>
2583 + <entry>
2584 + <base>NO_BACKUP_JOBS</base>
2585 + <trans>There are no backup jobs in the system.</trans>
2586 + </entry>
2587 + <entry>
2588 + <base>LABEL_ACTION</base>
2589 + <trans>Izvedi</trans>
2590 + </entry>
2591 + <entry>
2592 + <base>MODIFY</base>
2593 + <trans>View/Modify</trans>
2594 + </entry>
2595 + <entry>
2596 + <base>BACKUP</base>
2597 + <trans>Backup</trans>
2598 + </entry>
2599 + <entry>
2600 + <base>REMOVE</base>
2601 + <trans>Odstrani</trans>
2602 + </entry>
2603 + <entry>
2604 + <base>CREATE_TITLE</base>
2605 + <trans>Create backup job</trans>
2606 + </entry>
2607 + <entry>
2608 + <base>MODIFY_TITLE</base>
2609 + <trans>Modify backup job</trans>
2610 + </entry>
2611 + <entry>
2612 + <base>RESTORE_TITLE</base>
2613 + <trans>Restore backup job</trans>
2614 + </entry>
2615 + <entry>
2616 + <base>BACKUP_TITLE</base>
2617 + <trans>Launch backup job</trans>
2618 + </entry>
2619 + <entry>
2620 + <base>REMOVE_TITLE</base>
2621 + <trans>Remove backup job</trans>
2622 + </entry>
2623 + <entry>
2624 + <base>LABEL_JOBNAME</base>
2625 + <trans>Job name</trans>
2626 + </entry>
2627 + <entry>
2628 + <base>LABEL_DESTINATION</base>
2629 + <trans>Destination</trans>
2630 + </entry>
2631 + <entry>
2632 + <base>LABEL_BACKUP</base>
2633 + <trans>Backup selections</trans>
2634 + </entry>
2635 + <entry>
2636 + <base>LABEL_EXCLUDE</base>
2637 + <trans>Exclude files</trans>
2638 + </entry>
2639 + <entry>
2640 + <base>LABEL_PRUNE</base>
2641 + <trans>Prune directories</trans>
2642 + </entry>
2643 + <entry>
2644 + <base>LABEL_TARGET</base>
2645 + <trans>Target</trans>
2646 + </entry>
2647 + <entry>
2648 + <base>LABEL_SLICE</base>
2649 + <trans>Slice size</trans>
2650 + </entry>
2651 + <entry>
2652 + <base>LABEL_VFSTYPE</base>
2653 + <trans>File system</trans>
2654 + </entry>
2655 +
2656 + <entry>
2657 + <base>LABEL_COMPRESSION</base>
2658 + <trans>Compression</trans>
2659 + </entry>
2660 + <entry>
2661 + <base>LABEL_USERNAME</base>
2662 + <trans>Uporabniško ime</trans>
2663 + </entry>
2664 + <entry>
2665 + <base>LABEL_PASSWORD</base>
2666 + <trans>Geslo</trans>
2667 + </entry>
2668 + <entry>
2669 + <base>LABEL_DESCRIPTION</base>
2670 + <trans>Opis</trans>
2671 + </entry>
2672 + <entry>
2673 + <base>LABEL_EXPIRY</base>
2674 + <trans>Expiry</trans>
2675 + </entry>
2676 + <entry>
2677 + <base>LABEL_VERBOSE</base>
2678 + <trans>Verbose</trans>
2679 + </entry>
2680 + <entry>
2681 + <base>LABEL_BACKUP_DAY</base>
2682 + <trans>Backup day</trans>
2683 + </entry>
2684 + <entry>
2685 + <base>LABEL_BACKUP_TIME</base>
2686 + <trans>Backup time</trans>
2687 + </entry>
2688 + <entry>
2689 + <base>DISABLED</base>
2690 + <trans>Onemogoceno</trans>
2691 + </entry>
2692 + <entry>
2693 + <base>ENABLED</base>
2694 + <trans>Omogoceno</trans>
2695 + </entry>
2696 + <entry>
2697 + <base>LOCALDRIVE</base>
2698 + <trans>Local drive</trans>
2699 + </entry>
2700 + <entry>
2701 + <base>MOUNTED</base>
2702 + <trans>Mounted</trans>
2703 + </entry>
2704 + <entry>
2705 + <base>NETWORKSHARE</base>
2706 + <trans>Network share</trans>
2707 + </entry>
2708 + <entry>
2709 + <base>UNMOUNTED</base>
2710 + <trans>Unmounted</trans>
2711 + </entry>
2712 + <entry>
2713 + <base>DESCRIPTION_RESTORE_DATE</base>
2714 + <trans>Enter the date of the archive you wish to restore from. Format: [ yyyy.mm.dd ]</trans>
2715 + </entry>
2716 + <entry>
2717 + <base>LABEL_RESTORE_DATE</base>
2718 + <trans>Date</trans>
2719 + </entry>
2720 + <entry>
2721 + <base>DESCRIPTION_RESTORE_DR</base>
2722 + <trans><![CDATA[ <P>To perform a full disaster recovery restore set the following:</P> <P><B>Disaster Recovery</B> [ Enabled ] <B>Restore</B> [ *.* ] <B>Restore to</B> [ / ]</P> <P>Note: After completion of a full disaster recovery restore, you will need to enter the server-manager <B>Reboot or shutdown</B> panel and <B>Reconfigure</B> your P> <P>To perform a selective restore, enter one restore path per line. Paths must be relative. Example: To restore /root/contribs to the original location you would therefore enter:</P> <P><B>Disaster Recovery</B> [ Disabled ] <B>Restore</B> [ root/contribs ] <B>Restore to</B> [ / ]</P> ]]></trans>
2723 + </entry>
2724 + <entry>
2725 + <base>LABEL_RESTORE_DR</base>
2726 + <trans>Disaster Recovery</trans>
2727 + </entry>
2728 + <entry>
2729 + <base>LABEL_RESTORE</base>
2730 + <trans>Restavriraj</trans>
2731 + </entry>
2732 + <entry>
2733 + <base>LABEL_RESTORE_RESTORETO</base>
2734 + <trans>Restore to</trans>
2735 + </entry>
2736 + <entry>
2737 + <base>DESCRIPTION_JOBNAME</base>
2738 + <trans>Enter a unique backup job name. The name should contain only letters, numbers, periods, hyphens and underscores. No spaces.</trans>
2739 + </entry>
2740 + <entry>
2741 + <base>DESCRIPTION_DESC</base>
2742 + <trans>Enter a description for this backup job.</trans>
2743 + </entry>
2744 + <entry>
2745 + <base>DESCRIPTION_DR</base>
2746 + <trans>A Disaster Recovery backup job runs additional system processes during backup and restore events. Please set to Disabled if performing a standard backup.</trans>
2747 + </entry>
2748 + <entry>
2749 + <base>DESCRIPTION_BACKUP</base>
2750 + <trans>All backup selections needed to perform a Disaster Recovery are preset below. Note absolute paths are invalid. All paths must be relative to the base / directory. Example: [home] is relative/correct, [/home] is absolute/incorrect. If you are a performing a standard backup, edit the backup selections as required below. One entry per line. Do not enter [ /,/blah,proc,tmp ].</trans>
2751 + </entry>
2752 + <entry>
2753 + <base>DESCRIPTION_EXCLUDE</base>
2754 + <trans>Enter any file exclusions. Example: [ home/e-smith/files/ibays/ibayname/files/document.doc ]. One entry per line. Wildcards * and ? are valid.</trans>
2755 + </entry>
2756 + <entry>
2757 + <base>DESCRIPTION_PRUNE</base>
2758 + <trans>Enter any directory tree to prune and not include in the backup. Example: [ home/e-smith/files/ibays/ibayname ]. One entry per line. Wildcards * and ? valid.</trans>
2759 + </entry>
2760 + <entry>
2761 + <base>DESCRIPTION_TARGET</base>
2762 + <trans><![CDATA[ <P>Valid targets are an attached local drive or network share.</P> <P>If backing up to an attached local drive, enter the target mount point of your drive. Example: [/media/usbdisk]. Leave the username and password fields blank.</P> <P>If backing up to a network share, enter the target in UNC format. Example: [//computername/sharename]. In addition you must enter a valid username/password that is a local account on the target with full access rights to the share.</P> ]]></trans>
2763 + </entry>
2764 + <entry>
2765 + <base>DESCRIPTION_VFSTYPE</base>
2766 + <trans>Three file systems are supported. [ext3] for backup to local attached disk. [smbfs] for backup to Windows workstation and SME Server network shares. [cifs] for backup to Microsoft Windows Server. Note if using cifs, target entry above must use IP address. Example: [//10.1.1.1/sharename].</trans>
2767 + </entry>
2768 + <entry>
2769 + <base>DESCRIPTION_SLICE</base>
2770 + <trans>Enter the backup volume segment slices in megabytes. As an example to create 650MB volume segments for copying to CDR/RW you would enter [ 650 ]. This would create in the target files of the following format: job.yyyy.mm.dd.1.dar, job.yyyy.mm.dd.2.dar, etcetera. Note the maximum segment size is 2000MB. Total backup job size is limited only by available target free space.</trans>
2771 + </entry>
2772 + <entry>
2773 + <base>DESCRIPTION_COMPRESSION</base>
2774 + <trans>Enter the compression level from 0 (none) to 9 (maximum). No compression dramitcally improves backup speed.</trans>
2775 + </entry>
2776 + <entry>
2777 + <base>DESCRIPTION_U_P</base>
2778 + <trans>If backing up to a network share, enter a valid username/password that is a local account on the target with full access rights to the share. Leave the username and password blank if backing up to an attached local drive.</trans>
2779 + </entry>
2780 + <entry>
2781 + <base>DESCRIPTION_EXPIRY</base>
2782 + <trans>Enter a backup expiry time. This will keep backups on the target for n days. Choosing 0 means backups are overwritten every day.</trans>
2783 + </entry>
2784 + <entry>
2785 + <base>DESCRIPTION_VERBOSE</base>
2786 + <trans>Verbose option sets the output detail. On for full file-by-file listing and log file generated. Off for summary details only and no log file generated. Note if enabled size of output files is related to size of backup job and therefore can become quite large! Scheduled jobs will receive an e-mail to admin of job details.</trans>
2787 + </entry>
2788 + <entry>
2789 + <base>DESCRIPTION_BACKUP_DAY</base>
2790 + <trans>Enter the day you would like this backup to occur. Leave manual for unscheduled manual use.</trans>
2791 + </entry>
2792 + <entry>
2793 + <base>DESCRIPTION_BACKUP_TIME</base>
2794 + <trans>Enter the time you would like this backup to occur in 24 hr (hh:mm) format.</trans>
2795 + </entry>
2796 +</lexicon>
2797 --- /dev/null 2008-04-15 08:20:57.914268019 -0600
2798 +++ pootleupdate/root/etc/e-smith/locale/sv/etc/e-smith/web/functions/dar2 2008-04-20 21:03:33.000000000 -0600
2799 @@ -0,0 +1,235 @@
2800 +<lexicon lang="sv">
2801 + <entry>
2802 + <base>SAVE</base>
2803 + <trans>Spara</trans>
2804 + </entry>
2805 + <entry>
2806 + <base>PERFORM</base>
2807 + <trans>Verkställ</trans>
2808 + </entry>
2809 + <entry>
2810 + <base>FORM_TITLE</base>
2811 + <trans>Disk ARchive</trans>
2812 + </entry>
2813 + <entry>
2814 + <base>OPERATION_STATUS_REPORT</base>
2815 + <trans>Statusrapport över operationerna</trans>
2816 + </entry>
2817 + <entry>
2818 + <base>FORM_DESCRIPTION</base>
2819 + <trans><![CDATA[ <p>Use this panel to define, schedule and launch server backups and restores, to and from network shares or an attached local disk.</p> <p><a class="button-like" href="dar2?page=0&page_stack=&Next=Next&wherenext=DAR2_PAGE_CREATE">Create backup job</a></p> ]]></trans>
2820 + </entry>
2821 + <entry>
2822 + <base>NO_BACKUP_JOBS</base>
2823 + <trans>There are no backup jobs in the system.</trans>
2824 + </entry>
2825 + <entry>
2826 + <base>LABEL_ACTION</base>
2827 + <trans>Action</trans>
2828 + </entry>
2829 + <entry>
2830 + <base>MODIFY</base>
2831 + <trans>View/Modify</trans>
2832 + </entry>
2833 + <entry>
2834 + <base>BACKUP</base>
2835 + <trans>Backup</trans>
2836 + </entry>
2837 + <entry>
2838 + <base>REMOVE</base>
2839 + <trans>Remove</trans>
2840 + </entry>
2841 + <entry>
2842 + <base>CREATE_TITLE</base>
2843 + <trans>Create backup job</trans>
2844 + </entry>
2845 + <entry>
2846 + <base>MODIFY_TITLE</base>
2847 + <trans>Modify backup job</trans>
2848 + </entry>
2849 + <entry>
2850 + <base>RESTORE_TITLE</base>
2851 + <trans>Restore backup job</trans>
2852 + </entry>
2853 + <entry>
2854 + <base>BACKUP_TITLE</base>
2855 + <trans>Launch backup job</trans>
2856 + </entry>
2857 + <entry>
2858 + <base>REMOVE_TITLE</base>
2859 + <trans>Remove backup job</trans>
2860 + </entry>
2861 + <entry>
2862 + <base>LABEL_JOBNAME</base>
2863 + <trans>Job name</trans>
2864 + </entry>
2865 + <entry>
2866 + <base>LABEL_DESTINATION</base>
2867 + <trans>Destination</trans>
2868 + </entry>
2869 + <entry>
2870 + <base>LABEL_BACKUP</base>
2871 + <trans>Backup selections</trans>
2872 + </entry>
2873 + <entry>
2874 + <base>LABEL_EXCLUDE</base>
2875 + <trans>Exclude files</trans>
2876 + </entry>
2877 + <entry>
2878 + <base>LABEL_PRUNE</base>
2879 + <trans>Prune directories</trans>
2880 + </entry>
2881 + <entry>
2882 + <base>LABEL_TARGET</base>
2883 + <trans>Target</trans>
2884 + </entry>
2885 + <entry>
2886 + <base>LABEL_SLICE</base>
2887 + <trans>Slice size</trans>
2888 + </entry>
2889 + <entry>
2890 + <base>LABEL_VFSTYPE</base>
2891 + <trans>File system</trans>
2892 + </entry>
2893 +
2894 + <entry>
2895 + <base>LABEL_COMPRESSION</base>
2896 + <trans>Compression</trans>
2897 + </entry>
2898 + <entry>
2899 + <base>LABEL_USERNAME</base>
2900 + <trans>Användarnamn</trans>
2901 + </entry>
2902 + <entry>
2903 + <base>LABEL_PASSWORD</base>
2904 + <trans>Lösenord</trans>
2905 + </entry>
2906 + <entry>
2907 + <base>LABEL_DESCRIPTION</base>
2908 + <trans>Beskrivning</trans>
2909 + </entry>
2910 + <entry>
2911 + <base>LABEL_EXPIRY</base>
2912 + <trans>Expiry</trans>
2913 + </entry>
2914 + <entry>
2915 + <base>LABEL_VERBOSE</base>
2916 + <trans>Verbose</trans>
2917 + </entry>
2918 + <entry>
2919 + <base>LABEL_BACKUP_DAY</base>
2920 + <trans>Backup day</trans>
2921 + </entry>
2922 + <entry>
2923 + <base>LABEL_BACKUP_TIME</base>
2924 + <trans>Backup time</trans>
2925 + </entry>
2926 + <entry>
2927 + <base>DISABLED</base>
2928 + <trans>Ej tillåten</trans>
2929 + </entry>
2930 + <entry>
2931 + <base>ENABLED</base>
2932 + <trans>Tillåten</trans>
2933 + </entry>
2934 + <entry>
2935 + <base>LOCALDRIVE</base>
2936 + <trans>Local drive</trans>
2937 + </entry>
2938 + <entry>
2939 + <base>MOUNTED</base>
2940 + <trans>Mounted</trans>
2941 + </entry>
2942 + <entry>
2943 + <base>NETWORKSHARE</base>
2944 + <trans>Network share</trans>
2945 + </entry>
2946 + <entry>
2947 + <base>UNMOUNTED</base>
2948 + <trans>Unmounted</trans>
2949 + </entry>
2950 + <entry>
2951 + <base>DESCRIPTION_RESTORE_DATE</base>
2952 + <trans>Enter the date of the archive you wish to restore from. Format: [ yyyy.mm.dd ]</trans>
2953 + </entry>
2954 + <entry>
2955 + <base>LABEL_RESTORE_DATE</base>
2956 + <trans>Date</trans>
2957 + </entry>
2958 + <entry>
2959 + <base>DESCRIPTION_RESTORE_DR</base>
2960 + <trans><![CDATA[ <P>To perform a full disaster recovery restore set the following:</P> <P><B>Disaster Recovery</B> [ Enabled ] <B>Restore</B> [ *.* ] <B>Restore to</B> [ / ]</P> <P>Note: After completion of a full disaster recovery restore, you will need to enter the server-manager <B>Reboot or shutdown</B> panel and <B>Reconfigure</B> your P> <P>To perform a selective restore, enter one restore path per line. Paths must be relative. Example: To restore /root/contribs to the original location you would therefore enter:</P> <P><B>Disaster Recovery</B> [ Disabled ] <B>Restore</B> [ root/contribs ] <B>Restore to</B> [ / ]</P> ]]></trans>
2961 + </entry>
2962 + <entry>
2963 + <base>LABEL_RESTORE_DR</base>
2964 + <trans>Disaster Recovery</trans>
2965 + </entry>
2966 + <entry>
2967 + <base>LABEL_RESTORE</base>
2968 + <trans>Återställ</trans>
2969 + </entry>
2970 + <entry>
2971 + <base>LABEL_RESTORE_RESTORETO</base>
2972 + <trans>Restore to</trans>
2973 + </entry>
2974 + <entry>
2975 + <base>DESCRIPTION_JOBNAME</base>
2976 + <trans>Enter a unique backup job name. The name should contain only letters, numbers, periods, hyphens and underscores. No spaces.</trans>
2977 + </entry>
2978 + <entry>
2979 + <base>DESCRIPTION_DESC</base>
2980 + <trans>Enter a description for this backup job.</trans>
2981 + </entry>
2982 + <entry>
2983 + <base>DESCRIPTION_DR</base>
2984 + <trans>A Disaster Recovery backup job runs additional system processes during backup and restore events. Please set to Disabled if performing a standard backup.</trans>
2985 + </entry>
2986 + <entry>
2987 + <base>DESCRIPTION_BACKUP</base>
2988 + <trans>All backup selections needed to perform a Disaster Recovery are preset below. Note absolute paths are invalid. All paths must be relative to the base / directory. Example: [home] is relative/correct, [/home] is absolute/incorrect. If you are a performing a standard backup, edit the backup selections as required below. One entry per line. Do not enter [ /,/blah,proc,tmp ].</trans>
2989 + </entry>
2990 + <entry>
2991 + <base>DESCRIPTION_EXCLUDE</base>
2992 + <trans>Enter any file exclusions. Example: [ home/e-smith/files/ibays/ibayname/files/document.doc ]. One entry per line. Wildcards * and ? are valid.</trans>
2993 + </entry>
2994 + <entry>
2995 + <base>DESCRIPTION_PRUNE</base>
2996 + <trans>Enter any directory tree to prune and not include in the backup. Example: [ home/e-smith/files/ibays/ibayname ]. One entry per line. Wildcards * and ? valid.</trans>
2997 + </entry>
2998 + <entry>
2999 + <base>DESCRIPTION_TARGET</base>
3000 + <trans><![CDATA[ <P>Valid targets are an attached local drive or network share.</P> <P>If backing up to an attached local drive, enter the target mount point of your drive. Example: [/media/usbdisk]. Leave the username and password fields blank.</P> <P>If backing up to a network share, enter the target in UNC format. Example: [//computername/sharename]. In addition you must enter a valid username/password that is a local account on the target with full access rights to the share.</P> ]]></trans>
3001 + </entry>
3002 + <entry>
3003 + <base>DESCRIPTION_VFSTYPE</base>
3004 + <trans>Three file systems are supported. [ext3] for backup to local attached disk. [smbfs] for backup to Windows workstation and SME Server network shares. [cifs] for backup to Microsoft Windows Server. Note if using cifs, target entry above must use IP address. Example: [//10.1.1.1/sharename].</trans>
3005 + </entry>
3006 + <entry>
3007 + <base>DESCRIPTION_SLICE</base>
3008 + <trans>Enter the backup volume segment slices in megabytes. As an example to create 650MB volume segments for copying to CDR/RW you would enter [ 650 ]. This would create in the target files of the following format: job.yyyy.mm.dd.1.dar, job.yyyy.mm.dd.2.dar, etcetera. Note the maximum segment size is 2000MB. Total backup job size is limited only by available target free space.</trans>
3009 + </entry>
3010 + <entry>
3011 + <base>DESCRIPTION_COMPRESSION</base>
3012 + <trans>Enter the compression level from 0 (none) to 9 (maximum). No compression dramitcally improves backup speed.</trans>
3013 + </entry>
3014 + <entry>
3015 + <base>DESCRIPTION_U_P</base>
3016 + <trans>If backing up to a network share, enter a valid username/password that is a local account on the target with full access rights to the share. Leave the username and password blank if backing up to an attached local drive.</trans>
3017 + </entry>
3018 + <entry>
3019 + <base>DESCRIPTION_EXPIRY</base>
3020 + <trans>Enter a backup expiry time. This will keep backups on the target for n days. Choosing 0 means backups are overwritten every day.</trans>
3021 + </entry>
3022 + <entry>
3023 + <base>DESCRIPTION_VERBOSE</base>
3024 + <trans>Verbose option sets the output detail. On for full file-by-file listing and log file generated. Off for summary details only and no log file generated. Note if enabled size of output files is related to size of backup job and therefore can become quite large! Scheduled jobs will receive an e-mail to admin of job details.</trans>
3025 + </entry>
3026 + <entry>
3027 + <base>DESCRIPTION_BACKUP_DAY</base>
3028 + <trans>Enter the day you would like this backup to occur. Leave manual for unscheduled manual use.</trans>
3029 + </entry>
3030 + <entry>
3031 + <base>DESCRIPTION_BACKUP_TIME</base>
3032 + <trans>Enter the time you would like this backup to occur in 24 hr (hh:mm) format.</trans>
3033 + </entry>
3034 +</lexicon>
admin@koozali.org
 ViewVC Help
Powered by ViewVC 1.2.1 RSS 2.0 feed