smeserver-dar2/contribs8/smeserver-dar2-0.0.1-locale-2016-03-09.patch

--- smeserver-dar2-0.0.1/root/etc/e-smith/locale/it/etc/e-smith/web/functions/dar2      2016-03-09 02:10:28.540959075 +0100
+++ smeserver-dar2-0.0.1.update/root/etc/e-smith/locale/it/etc/e-smith/web/functions/dar2       2016-03-09 02:34:41.415244197 +0100
@@ -90,31 +90,31 @@
     </entry>
     <entry>
             <base>LOCALDRIVE</base>
-            <trans>Local drive</trans>
+            <trans>Disco locale</trans>
     </entry>
     <entry>
             <base>MOUNTED</base>
-            <trans>Mounted</trans>
+            <trans>Montato</trans>
     </entry>
     <entry>
             <base>NETWORKSHARE</base>
-            <trans>Network share</trans>
+            <trans>Condivisione di rete</trans>
     </entry>
     <entry>
             <base>UNMOUNTED</base>
-            <trans>Unmounted</trans>
+            <trans>Non montato</trans>
     </entry>
     <entry>
         <base>DESCRIPTION_RESTORE_DATE</base>
-        <trans>Enter the date of the archive you wish to restore from. Format: [ yyyy.mm.dd ]</trans>
+        <trans>Inserire la data dell'archivio da cui ripristinare i file. Formato: [ yyyy.mm.dd ]</trans>
     </entry>
     <entry>
             <base>RESTORE_DATE</base>
-            <trans>Date</trans>
+            <trans>Data</trans>
     </entry>
     <entry>
         <base>DESCRIPTION_RESTORE_DR</base>
-        <trans><![CDATA[ <P>To perform a full disaster recovery restore set the following:</P> <P><B>Disaster Recovery</B> [ Enabled ] <B>Restore</B> [ *.* ] <B>Restore to</B> [ / ]</P> <P>Note: After completion of a full disaster recovery restore, you will need to enter the server-manager <B>Reboot or shutdown</B> panel and <B>Reconfigure</B> your server.</P> <P>To perform a selective restore, enter one restore path per line. Paths must be relative. Example: To restore /root/contribs to the original location you would therefore enter:</P> <P><B>Disaster Recovery</B> [ Disabled ] <B>Restore</B> [ root/contribs ] <B>Restore to</B> [ / ]</P> ]]></trans>
+        <trans><![CDATA[ <P>Per eseguire un disaster recovery completo configurarlo come segue:</P> <P><B>Disaster Recovery</B> [ Abilitato ] <B>Ripristino</B> [ *.* ] <B>Ripristino su</B> [ / ]</P> <P>Nota: dopo il completamento di un disaster recovery, è necessario accedere al pannello del server manager  <B>Riavvio spegnimento</B> e selezionare <B>Riconfigura</B> il server.</P> <P>Per eseguire un ripristino selettivo, inserire un persorso di ripristino per riga. I percorsi sono relativi. Ad esempio, per ripristinare /root/contribs nella posizione originale selezionare:</P> <P><B>Disaster Recovery</B> [ Disabilitato ] <B>Ripristino</B> [ root/contribs ] <B>Ripristino su</B> [ / ]</P> ]]></trans>
     </entry>
     <entry>
             <base>RESTORE_DR</base>
@@ -122,27 +122,27 @@
     </entry>
     <entry>
             <base>RESTORE_RESTORETO</base>
-            <trans>Restore to</trans>
+            <trans>Ripristino su</trans>
     </entry>
     <entry>
         <base>DESCRIPTION_JOBNAME</base>
-        <trans>Enter a unique backup job name. The name should contain only letters, numbers, periods, hyphens and underscores. No spaces.</trans>
+        <trans>Inserire un nome unico per il backup job. Il nome deve contenere solo lettere, numeri, punti, trattini e underscore. Non sono ammessi spazi.</trans>
     </entry>
     <entry>
         <base>DESCRIPTION_DESC</base>
-        <trans>Enter a description for this backup job.</trans>
+        <trans>Inserire una descrizione per il backup job.</trans>
     </entry>
     <entry>
         <base>DESCRIPTION_DR</base>
-        <trans>A Disaster Recovery backup job runs additional system processes during backup and restore events. Please set to Disabled if performing a standard backup.</trans>
+        <trans>Un Disaster Recovery esegue dei processi di sistema aggiuntivi durante il salvataggio ed il ripristino. Impostare a 'disabilitato' se si esegue un salvataggio standard.</trans>
     </entry>
     <entry>
         <base>DESCRIPTION_BACKUP</base>
-        <trans>All backup selections needed to perform a Disaster Recovery are preset below. Note absolute paths are invalid. All paths must be relative to the base / directory. Example: [home] is relative/correct, [/home] is absolute/incorrect. If you are a performing a standard backup, edit the backup selections as required below. One entry per line. Do not enter [ /,/blah,proc,tmp ].</trans>
+        <trans>Tutte le selezioni di file/cartelle necessarie per eseguire un Disaster Recovery son preimpostate di seguito. Nota: i percorsi assoluti non sono validi. Tutti i percorsi devono essere relativi a / . Ad esempio [home] è relativo/corretto, [/home] è assoluto/scorretto. Se sis sta eseguendo un salvataggio standard, compilare la lista di backup come indicato sotto. Una selezione per riga. Non inserire [ /,/blah,proc,tmp ].</trans>
     </entry>
     <entry>
         <base>DESCRIPTION_EXCLUDE</base>
-        <trans>Enter any file exclusions. Example: [ home/e-smith/files/ibays/ibayname/files/document.doc ]. One entry per line. Wildcards * and ? are valid.</trans>
+        <trans>Inserire le esclusioni dei file. Ad esempio: [ home/e-smith/files/ibays/ibayname/files/document.doc ]. Una selezione per riga. Sono ammessi i caratteri 'wildcard' * e ?.</trans>
     </entry>
     <entry>
         <base>DESCRIPTION_PRUNE</base>
--- smeserver-dar2-0.0.1/root/etc/e-smith/locale/zh-cn/etc/e-smith/web/functions/dar2   2016-03-09 02:10:28.589959050 +0100
+++ smeserver-dar2-0.0.1.update/root/etc/e-smith/locale/zh-cn/etc/e-smith/web/functions/dar2    2016-03-09 02:34:43.048243374 +0100
@@ -5,7 +5,7 @@
     </entry>
     <entry>
         <base>FORM_DESCRIPTION</base>
-        <trans><![CDATA[ <p>Use this panel to define, schedule and launch server backups and restores, to and from network shares or an attached local disk.</p> <p><a class="button-like" href="dar2?page=0&page_stack=&Next=Next&wherenext=DAR2_PAGE_CREATE">Create backup job</a></p> ]]></trans>
+        <trans><![CDATA[ <p>使用此面板来定义、预设和执行服务器的备份与还原操作，不论使用本地磁盘还是网络共享。</p> <p><a class="button-like" href="dar2?page=0&page_stack=&Next=Next&wherenext=DAR2_PAGE_CREATE">创建备份任务</a></p> ]]></trans>
     </entry>
     <entry>
         <base>NO_BACKUP_JOBS</base>
@@ -94,7 +94,7 @@
     </entry>
     <entry>
             <base>MOUNTED</base>
-            <trans>已经挂载的</trans>
+            <trans>已挂载</trans>
     </entry>
     <entry>
             <base>NETWORKSHARE</base>
@@ -114,7 +114,7 @@
     </entry>
     <entry>
         <base>DESCRIPTION_RESTORE_DR</base>
-        <trans><![CDATA[ <P>To perform a full disaster recovery restore set the following:</P> <P><B>Disaster Recovery</B> [ Enabled ] <B>Restore</B> [ *.* ] <B>Restore to</B> [ / ]</P> <P>Note: After completion of a full disaster recovery restore, you will need to enter the server-manager <B>Reboot or shutdown</B> panel and <B>Reconfigure</B> your server.</P> <P>To perform a selective restore, enter one restore path per line. Paths must be relative. Example: To restore /root/contribs to the original location you would therefore enter:</P> <P><B>Disaster Recovery</B> [ Disabled ] <B>Restore</B> [ root/contribs ] <B>Restore to</B> [ / ]</P> ]]></trans>
+        <trans><![CDATA[ <P>要执行完整的灾难还原操作设置如下:</P> <P><B>灾难恢复</B> [ 启用 ] <B>恢复</B> [ *.* ] <B>恢复到</B> [ / ]</P> <P>注意：当完成完整的灾难恢复后，您需要进入服务器管理界面<B>重新启动或者关机</B> 控制面板和 <B>重新配置</B> 您的服务器.</P> <P>要执行选择性的恢复，每行输入一个恢复路径。路径必须为相对路径. 比如: 要恢复/root/contribs 到初始化状态，因此您要输入:</P> <P><B>灾难恢复</B> [ 禁用 ] <B>恢复</B> [ root/contribs ] <B>恢复到o</B> [ / ]</P> ]]></trans>
     </entry>
     <entry>
             <base>RESTORE_DR</base>
@@ -150,7 +150,7 @@
     </entry>
     <entry>
         <base>DESCRIPTION_TARGET</base>
-        <trans><![CDATA[ <P>Valid targets are an attached local drive or network share.</P> <P>If backing up to an attached local drive, enter the target mount point of your drive. Example: [/media/usbdisk]. Leave the username and password fields blank.</P> <P>If backing up to a network share, enter the target in UNC format. Example: [//computername/sharename]. In addition you must enter a valid username/password that is a local account on the target with full access rights to the share.</P> ]]></trans>
+        <trans><![CDATA[ <P>有效的目标是一个本地磁盘或网络共享。</P> <P>如果是备份到本地磁盘，请输入磁盘的挂载点。例如: [/media/usbdisk]。 用户名和密码请留空。</P> <P>如果是备份到网络共享，也请输入路径。例如: [//computername/sharename]。另外，您需要输入有效的用户名和密码，以保证使用目标机器的本地用户，并确保在网络共享中有完整的权限。 </P> ]]></trans>
     </entry>
     <entry>
         <base>DESCRIPTION_VFSTYPE</base>
1	--- smeserver-dar2-0.0.1/root/etc/e-smith/locale/it/etc/e-smith/web/functions/dar2 2016-03-09 02:10:28.540959075 +0100
2	+++ smeserver-dar2-0.0.1.update/root/etc/e-smith/locale/it/etc/e-smith/web/functions/dar2 2016-03-09 02:34:41.415244197 +0100
3	@@ -90,31 +90,31 @@
4	</entry>
5	<entry>
6	<base>LOCALDRIVE</base>
7	- <trans>Local drive</trans>
8	+ <trans>Disco locale</trans>
9	</entry>
10	<entry>
11	<base>MOUNTED</base>
12	- <trans>Mounted</trans>
13	+ <trans>Montato</trans>
14	</entry>
15	<entry>
16	<base>NETWORKSHARE</base>
17	- <trans>Network share</trans>
18	+ <trans>Condivisione di rete</trans>
19	</entry>
20	<entry>
21	<base>UNMOUNTED</base>
22	- <trans>Unmounted</trans>
23	+ <trans>Non montato</trans>
24	</entry>
25	<entry>
26	<base>DESCRIPTION_RESTORE_DATE</base>
27	- <trans>Enter the date of the archive you wish to restore from. Format: [ yyyy.mm.dd ]</trans>
28	+ <trans>Inserire la data dell'archivio da cui ripristinare i file. Formato: [ yyyy.mm.dd ]</trans>
29	</entry>
30	<entry>
31	<base>RESTORE_DATE</base>
32	- <trans>Date</trans>
33	+ <trans>Data</trans>
34	</entry>
35	<entry>
36	<base>DESCRIPTION_RESTORE_DR</base>
37	- <trans><![CDATA[ <P>To perform a full disaster recovery restore set the following:</P> <P><B>Disaster Recovery</B> [ Enabled ] <B>Restore</B> [ . ] <B>Restore to</B> [ / ]</P> <P>Note: After completion of a full disaster recovery restore, you will need to enter the server-manager <B>Reboot or shutdown</B> panel and <B>Reconfigure</B> your server.</P> <P>To perform a selective restore, enter one restore path per line. Paths must be relative. Example: To restore /root/contribs to the original location you would therefore enter:</P> <P><B>Disaster Recovery</B> [ Disabled ] <B>Restore</B> [ root/contribs ] <B>Restore to</B> [ / ]</P> ]]></trans>
38	+ <trans><![CDATA[ <P>Per eseguire un disaster recovery completo configurarlo come segue:</P> <P><B>Disaster Recovery</B> [ Abilitato ] <B>Ripristino</B> [ . ] <B>Ripristino su</B> [ / ]</P> <P>Nota: dopo il completamento di un disaster recovery, è necessario accedere al pannello del server manager <B>Riavvio spegnimento</B> e selezionare <B>Riconfigura</B> il server.</P> <P>Per eseguire un ripristino selettivo, inserire un persorso di ripristino per riga. I percorsi sono relativi. Ad esempio, per ripristinare /root/contribs nella posizione originale selezionare:</P> <P><B>Disaster Recovery</B> [ Disabilitato ] <B>Ripristino</B> [ root/contribs ] <B>Ripristino su</B> [ / ]</P> ]]></trans>
39	</entry>
40	<entry>
41	<base>RESTORE_DR</base>
42	@@ -122,27 +122,27 @@
43	</entry>
44	<entry>
45	<base>RESTORE_RESTORETO</base>
46	- <trans>Restore to</trans>
47	+ <trans>Ripristino su</trans>
48	</entry>
49	<entry>
50	<base>DESCRIPTION_JOBNAME</base>
51	- <trans>Enter a unique backup job name. The name should contain only letters, numbers, periods, hyphens and underscores. No spaces.</trans>
52	+ <trans>Inserire un nome unico per il backup job. Il nome deve contenere solo lettere, numeri, punti, trattini e underscore. Non sono ammessi spazi.</trans>
53	</entry>
54	<entry>
55	<base>DESCRIPTION_DESC</base>
56	- <trans>Enter a description for this backup job.</trans>
57	+ <trans>Inserire una descrizione per il backup job.</trans>
58	</entry>
59	<entry>
60	<base>DESCRIPTION_DR</base>
61	- <trans>A Disaster Recovery backup job runs additional system processes during backup and restore events. Please set to Disabled if performing a standard backup.</trans>
62	+ <trans>Un Disaster Recovery esegue dei processi di sistema aggiuntivi durante il salvataggio ed il ripristino. Impostare a 'disabilitato' se si esegue un salvataggio standard.</trans>
63	</entry>
64	<entry>
65	<base>DESCRIPTION_BACKUP</base>
66	- <trans>All backup selections needed to perform a Disaster Recovery are preset below. Note absolute paths are invalid. All paths must be relative to the base / directory. Example: [home] is relative/correct, [/home] is absolute/incorrect. If you are a performing a standard backup, edit the backup selections as required below. One entry per line. Do not enter [ /,/blah,proc,tmp ].</trans>
67	+ <trans>Tutte le selezioni di file/cartelle necessarie per eseguire un Disaster Recovery son preimpostate di seguito. Nota: i percorsi assoluti non sono validi. Tutti i percorsi devono essere relativi a / . Ad esempio [home] è relativo/corretto, [/home] è assoluto/scorretto. Se sis sta eseguendo un salvataggio standard, compilare la lista di backup come indicato sotto. Una selezione per riga. Non inserire [ /,/blah,proc,tmp ].</trans>
68	</entry>
69	<entry>
70	<base>DESCRIPTION_EXCLUDE</base>
71	- <trans>Enter any file exclusions. Example: [ home/e-smith/files/ibays/ibayname/files/document.doc ]. One entry per line. Wildcards * and ? are valid.</trans>
72	+ <trans>Inserire le esclusioni dei file. Ad esempio: [ home/e-smith/files/ibays/ibayname/files/document.doc ]. Una selezione per riga. Sono ammessi i caratteri 'wildcard' * e ?.</trans>
73	</entry>
74	<entry>
75	<base>DESCRIPTION_PRUNE</base>
76	--- smeserver-dar2-0.0.1/root/etc/e-smith/locale/zh-cn/etc/e-smith/web/functions/dar2 2016-03-09 02:10:28.589959050 +0100
77	+++ smeserver-dar2-0.0.1.update/root/etc/e-smith/locale/zh-cn/etc/e-smith/web/functions/dar2 2016-03-09 02:34:43.048243374 +0100
78	@@ -5,7 +5,7 @@
79	</entry>
80	<entry>
81	<base>FORM_DESCRIPTION</base>
82	- <trans><![CDATA[ <p>Use this panel to define, schedule and launch server backups and restores, to and from network shares or an attached local disk.</p> <p><a class="button-like" href="dar2?page=0&page_stack=&Next=Next&wherenext=DAR2_PAGE_CREATE">Create backup job</a></p> ]]></trans>
83	+ <trans><![CDATA[ <p>使用此面板来定义、预设和执行服务器的备份与还原操作，不论使用本地磁盘还是网络共享。</p> <p><a class="button-like" href="dar2?page=0&page_stack=&Next=Next&wherenext=DAR2_PAGE_CREATE">创建备份任务</a></p> ]]></trans>
84	</entry>
85	<entry>
86	<base>NO_BACKUP_JOBS</base>
87	@@ -94,7 +94,7 @@
88	</entry>
89	<entry>
90	<base>MOUNTED</base>
91	- <trans>已经挂载的</trans>
92	+ <trans>已挂载</trans>
93	</entry>
94	<entry>
95	<base>NETWORKSHARE</base>
96	@@ -114,7 +114,7 @@
97	</entry>
98	<entry>
99	<base>DESCRIPTION_RESTORE_DR</base>
100	- <trans><![CDATA[ <P>To perform a full disaster recovery restore set the following:</P> <P><B>Disaster Recovery</B> [ Enabled ] <B>Restore</B> [ . ] <B>Restore to</B> [ / ]</P> <P>Note: After completion of a full disaster recovery restore, you will need to enter the server-manager <B>Reboot or shutdown</B> panel and <B>Reconfigure</B> your server.</P> <P>To perform a selective restore, enter one restore path per line. Paths must be relative. Example: To restore /root/contribs to the original location you would therefore enter:</P> <P><B>Disaster Recovery</B> [ Disabled ] <B>Restore</B> [ root/contribs ] <B>Restore to</B> [ / ]</P> ]]></trans>
101	+ <trans><![CDATA[ <P>要执行完整的灾难还原操作设置如下:</P> <P><B>灾难恢复</B> [ 启用 ] <B>恢复</B> [ . ] <B>恢复到</B> [ / ]</P> <P>注意：当完成完整的灾难恢复后，您需要进入服务器管理界面<B>重新启动或者关机</B> 控制面板和 <B>重新配置</B> 您的服务器.</P> <P>要执行选择性的恢复，每行输入一个恢复路径。路径必须为相对路径. 比如: 要恢复/root/contribs 到初始化状态，因此您要输入:</P> <P><B>灾难恢复</B> [ 禁用 ] <B>恢复</B> [ root/contribs ] <B>恢复到o</B> [ / ]</P> ]]></trans>
102	</entry>
103	<entry>
104	<base>RESTORE_DR</base>
105	@@ -150,7 +150,7 @@
106	</entry>
107	<entry>
108	<base>DESCRIPTION_TARGET</base>
109	- <trans><![CDATA[ <P>Valid targets are an attached local drive or network share.</P> <P>If backing up to an attached local drive, enter the target mount point of your drive. Example: [/media/usbdisk]. Leave the username and password fields blank.</P> <P>If backing up to a network share, enter the target in UNC format. Example: [//computername/sharename]. In addition you must enter a valid username/password that is a local account on the target with full access rights to the share.</P> ]]></trans>
110	+ <trans><![CDATA[ <P>有效的目标是一个本地磁盘或网络共享。</P> <P>如果是备份到本地磁盘，请输入磁盘的挂载点。例如: [/media/usbdisk]。用户名和密码请留空。</P> <P>如果是备份到网络共享，也请输入路径。例如: [//computername/sharename]。另外，您需要输入有效的用户名和密码，以保证使用目标机器的本地用户，并确保在网络共享中有完整的权限。 </P> ]]></trans>
111	</entry>
112	<entry>
113	<base>DESCRIPTION_VFSTYPE</base>