--- smeserver-dhcpmanager-2.0.2/root/etc/e-smith/locale/bg/etc/e-smith/web/functions/dhcpd 1970-01-01 01:00:00.000000000 +0100 +++ smeserver-dhcpmanager-2.0.2.update/root/etc/e-smith/locale/bg/etc/e-smith/web/functions/dhcpd 2015-08-17 02:31:45.232748263 +0200 @@ -0,0 +1,331 @@ + + + DHCP manager + DHCP Manager + + + DHCPD_TITLE + DHCP Manager + + + DHCPD_SETTINGS_TITLE + Settings of the DHCP server + + + CONNECTED_IP + Show DHCP Clients + + + SCAN_YOUR_NETWORK + Scan your network + + + GLOBAL_WINPOPUP + Send Global Netsend WinPopup + + + CHECK_CLIENT_STATUS + Always check the status of computers (Disabled is much faster) + + + SHOW_CONNECTED_IP_TITLE + Show all devices connected to the dhcp server : + + + SCAN_YOUR_NETWORK_TITLE + Scan your network to show active devices : + + + GLOBAL_WINPOPUP_TITLE + Send a global WinPopup with the Net send protocol + + + STATUS_DHCP_SERVER + State of DHCPD + + + DHCP_START + DHCP Start + + + DHCP_END + DHCP End + + + CUSTOM_WINSERVER_TITLE + Enable a WINS Server. + + + CUSTOM_WINSERVER_STATUS + WINS Server + + + CUSTOM_WINSERVER_ADDRESS + WINS Server address + + + CUSTOM_DNS_TITLE + Enable custom DNS servers. + + + CUSTOM_DNS_STATUS + Custom DNS + + + PRIMARY_DNS_ADDRESS + Primary DNS + + + SECONDARY_DNS_ADDRESS + Secondary DNS + + + CUSTOM_GATEWAY_TITLE + Enable a custom gateway address. + + + CUSTOM_GATEWAY_STATUS + Custom gateway + + + CUSTOM_GATEWAY_ADDRESS + Gateway address + + + CUSTOM_LEASETIME_TITLE + Set the lease time (default is 86400 seconds). + + + CUSTOM_LEASETIME + Custom lease time + + + SAVE_TITLE + After changing settings above, you must save and restart dhcpd. + + + SAVE/RESTART + Save/Restart + + + DHCPD_SETTING_ERRORS + DHCPd Settings ERRORS + + + DHCP_START_GREATER_DHCP_END_ERRORS + Incorrect range of IPs, the DHCP Start is greater than the DHCP End , Update unsuccessfull]]> + + + CLICK_HERE_TO_MAIN_PANEL + Click Here to return to the main panel]]> + + + DHCP_RANGE_MUST_NOT_INCLUDE_SERVER_IP + Incorrect range of IPs, the range of IP address allocation must not include the server address, Update unsuccessfull]]> + + + DHCP_RANGE_WITH_BAD_IP + Incorrect IP in the DHCP range, Update unsuccessfull]]> + + + WINSSERVER_BAD_IP + Incorrect IP for WINS Server, Update unsuccessfull]]> + + + DNS_SERVER_WITH_BAD_IP + Incorrect IP for DNS servers, Update unsuccessfull]]> + + + GATEWAY_BAD_IP + Incorrect IP for Gateway, Update unsuccessfull]]> + + + SUCCESSFULLY_SAVED_SETTINGS + Successfully saved settings]]> + + + REMOVE_A_DHCP_LEASE_TITLE + Removing a DHCP Lease + + + REMOVE_A_DHCP_LEASE + Remove an entry in dhcpd.leases + + + ARE_YOU_SURE + are you sure ? + + + REMOVE_A_DHCP_LEASE_ACTION + You are about to remove a client from the dhcpd.leases file. + + + SUCCESSFULLY_DELETED_THE_CLIENT + Successfully deleted in dhcpd.leases the client : ]]> + + + WAKING_A_REMOTE_COMPUTER_TITLE + Waking Up a remote computer + + + WAKING_A_REMOTE_COMPUTER + You are about to wake up a remote computer. + + + WAKING_A_REMOTE_COMPUTER_ACTION + Are you sure you want to wake on lan the client : + + + + WAKE_UP + Wake UP + + + REMOVE + Премахване + + + SUCCESSFULLY_CLIENT_WOL_REQUEST + Successfully request to wake up the client. The computer may take time to wake up.]]> + + + ALL_OF_THEM + All of them + + + SENDING_A_WINPOPUP + Sending a WinPopup + + + SENDING_A_WINPOPUP_TO + You are about to send a WinPopup to + + + YOUR_MESSAGE + Your message + + + WRITE_YOUR_MESSAGE + Write your message here + + + DO_YOU_WANT_TO_SENT + Do you want to send this message to + + + SEND_WINPOPUP_TO + Send a WinPopup to + + + SUCCESSFULLY_SENT_MESSAGE + Successfully sent message popup to]]> + + + WARNING_NO_WINPOPUP_GARANTY + Warning, there is no garanty that the popup will appear on the remote computer.]]> + + + MANAGING_DHCP_CLIENT + Managing DHCP clients + + + STATUS_REPORT + Operation status report : + + + REFRESH_CONNECTED_IP_LIST + You may want to refresh this list ? + + + REFRESH + Refresh the list + + + CLEAN_ALL_DHCPLEASES + You may want to clean the dhcp.leases + + + REMOVE_ALL_LEASES + Remove all leases + + + NETWORK_NAME + Network Name + + + STATUS_CLICK_FOR_WOL + Status - click for WOL + + + START_DATE + Start Date + + + END_DATE + End Date + + + MAC_ADDRESS + MAC Address + + + NOT_CHECKED + Not Checked...]]> + + + ACTIVE_DEVICE + Active Device]]> + + + WAKE_UP_ACTION + Wake-Up...]]> + + + REMOVE_ACTION + Remove... + + + WINPOPUP_ACTION + WinPopup... + + + NO_CONNECTED_COMPUTERS + There are no connected computers + + + REMOVE_DHCP_LEASE_TITLE + Removing all DHCP Lease + + + REMOVE_DHCP_LEASE_WARNING + Remove all entries in dhcpd.leases may cause issues]]> + + + REMOVE_DHCP_LEASE_WARNING2 + The lease file is a log-structured file - whenever a lease changes, the contents of that lease are written to the end of the file. This means that it is entirely possible for there to be two or more declarations of the same lease in the lease file at the same time. In that case, the instance of that particular lease that appears last in the file is the one that is in effect. + + + SUCCESSFULLY_REMOVED_ALL_LEASES + Successfully deleted all leases.]]> + + + REMOVE_ALL_LEASES_ACTION + Remove all dhcp leases + + + SCANNING_NETWORK_TITLE + Scanning your network, the time needed depends of your subnet mask + + + NETWORK_VALUES_FOUND + Please wait .... Your subnet and your netmask appear to be : + + + ERROR_WHILE_REMOVING_ALL_LEASES + Error while removing all dhcp Leases]]> + + + ERROR_WHILE_SAVING_SETTINGS + Error while saving settings]]> + + --- smeserver-dhcpmanager-2.0.2/root/etc/e-smith/locale/da/etc/e-smith/web/functions/dhcpd 1970-01-01 01:00:00.000000000 +0100 +++ smeserver-dhcpmanager-2.0.2.update/root/etc/e-smith/locale/da/etc/e-smith/web/functions/dhcpd 2015-08-17 02:31:45.388748255 +0200 @@ -0,0 +1,331 @@ + + + DHCP manager + DHCP Manager + + + DHCPD_TITLE + DHCP Manager + + + DHCPD_SETTINGS_TITLE + Settings of the DHCP server + + + CONNECTED_IP + Show DHCP Clients + + + SCAN_YOUR_NETWORK + Scan your network + + + GLOBAL_WINPOPUP + Send Global Netsend WinPopup + + + CHECK_CLIENT_STATUS + Always check the status of computers (Disabled is much faster) + + + SHOW_CONNECTED_IP_TITLE + Show all devices connected to the dhcp server : + + + SCAN_YOUR_NETWORK_TITLE + Scan your network to show active devices : + + + GLOBAL_WINPOPUP_TITLE + Send a global WinPopup with the Net send protocol + + + STATUS_DHCP_SERVER + State of DHCPD + + + DHCP_START + DHCP Start + + + DHCP_END + DHCP End + + + CUSTOM_WINSERVER_TITLE + Enable a WINS Server. + + + CUSTOM_WINSERVER_STATUS + WINS Server + + + CUSTOM_WINSERVER_ADDRESS + WINS Server address + + + CUSTOM_DNS_TITLE + Enable custom DNS servers. + + + CUSTOM_DNS_STATUS + Custom DNS + + + PRIMARY_DNS_ADDRESS + Primary DNS + + + SECONDARY_DNS_ADDRESS + Secondary DNS + + + CUSTOM_GATEWAY_TITLE + Enable a custom gateway address. + + + CUSTOM_GATEWAY_STATUS + Custom gateway + + + CUSTOM_GATEWAY_ADDRESS + Gateway address + + + CUSTOM_LEASETIME_TITLE + Set the lease time (default is 86400 seconds). + + + CUSTOM_LEASETIME + Custom lease time + + + SAVE_TITLE + After changing settings above, you must save and restart dhcpd. + + + SAVE/RESTART + Save/Restart + + + DHCPD_SETTING_ERRORS + DHCPd Settings ERRORS + + + DHCP_START_GREATER_DHCP_END_ERRORS + Incorrect range of IPs, the DHCP Start is greater than the DHCP End , Update unsuccessfull]]> + + + CLICK_HERE_TO_MAIN_PANEL + Click Here to return to the main panel]]> + + + DHCP_RANGE_MUST_NOT_INCLUDE_SERVER_IP + Incorrect range of IPs, the range of IP address allocation must not include the server address, Update unsuccessfull]]> + + + DHCP_RANGE_WITH_BAD_IP + Incorrect IP in the DHCP range, Update unsuccessfull]]> + + + WINSSERVER_BAD_IP + Incorrect IP for WINS Server, Update unsuccessfull]]> + + + DNS_SERVER_WITH_BAD_IP + Incorrect IP for DNS servers, Update unsuccessfull]]> + + + GATEWAY_BAD_IP + Incorrect IP for Gateway, Update unsuccessfull]]> + + + SUCCESSFULLY_SAVED_SETTINGS + Successfully saved settings]]> + + + REMOVE_A_DHCP_LEASE_TITLE + Removing a DHCP Lease + + + REMOVE_A_DHCP_LEASE + Remove an entry in dhcpd.leases + + + ARE_YOU_SURE + are you sure ? + + + REMOVE_A_DHCP_LEASE_ACTION + You are about to remove a client from the dhcpd.leases file. + + + SUCCESSFULLY_DELETED_THE_CLIENT + Successfully deleted in dhcpd.leases the client : ]]> + + + WAKING_A_REMOTE_COMPUTER_TITLE + Waking Up a remote computer + + + WAKING_A_REMOTE_COMPUTER + You are about to wake up a remote computer. + + + WAKING_A_REMOTE_COMPUTER_ACTION + Are you sure you want to wake on lan the client : + + + + WAKE_UP + Wake UP + + + REMOVE + Fjern + + + SUCCESSFULLY_CLIENT_WOL_REQUEST + Successfully request to wake up the client. The computer may take time to wake up.]]> + + + ALL_OF_THEM + All of them + + + SENDING_A_WINPOPUP + Sending a WinPopup + + + SENDING_A_WINPOPUP_TO + You are about to send a WinPopup to + + + YOUR_MESSAGE + Din besked + + + WRITE_YOUR_MESSAGE + Write your message here + + + DO_YOU_WANT_TO_SENT + Do you want to send this message to + + + SEND_WINPOPUP_TO + Send a WinPopup to + + + SUCCESSFULLY_SENT_MESSAGE + Successfully sent message popup to]]> + + + WARNING_NO_WINPOPUP_GARANTY + Warning, there is no garanty that the popup will appear on the remote computer.]]> + + + MANAGING_DHCP_CLIENT + Managing DHCP clients + + + STATUS_REPORT + Operation status report : + + + REFRESH_CONNECTED_IP_LIST + You may want to refresh this list ? + + + REFRESH + Refresh the list + + + CLEAN_ALL_DHCPLEASES + You may want to clean the dhcp.leases + + + REMOVE_ALL_LEASES + Remove all leases + + + NETWORK_NAME + Network Name + + + STATUS_CLICK_FOR_WOL + Status - click for WOL + + + START_DATE + Start Date + + + END_DATE + End Date + + + MAC_ADDRESS + MAC Address + + + NOT_CHECKED + Not Checked...]]> + + + ACTIVE_DEVICE + Active Device]]> + + + WAKE_UP_ACTION + Wake-Up...]]> + + + REMOVE_ACTION + Remove... + + + WINPOPUP_ACTION + WinPopup... + + + NO_CONNECTED_COMPUTERS + There are no connected computers + + + REMOVE_DHCP_LEASE_TITLE + Removing all DHCP Lease + + + REMOVE_DHCP_LEASE_WARNING + Remove all entries in dhcpd.leases may cause issues]]> + + + REMOVE_DHCP_LEASE_WARNING2 + The lease file is a log-structured file - whenever a lease changes, the contents of that lease are written to the end of the file. This means that it is entirely possible for there to be two or more declarations of the same lease in the lease file at the same time. In that case, the instance of that particular lease that appears last in the file is the one that is in effect. + + + SUCCESSFULLY_REMOVED_ALL_LEASES + Successfully deleted all leases.]]> + + + REMOVE_ALL_LEASES_ACTION + Remove all dhcp leases + + + SCANNING_NETWORK_TITLE + Scanning your network, the time needed depends of your subnet mask + + + NETWORK_VALUES_FOUND + Please wait .... Your subnet and your netmask appear to be : + + + ERROR_WHILE_REMOVING_ALL_LEASES + Error while removing all dhcp Leases]]> + + + ERROR_WHILE_SAVING_SETTINGS + Error while saving settings]]> + + --- smeserver-dhcpmanager-2.0.2/root/etc/e-smith/locale/de/etc/e-smith/web/functions/dhcpd 1970-01-01 01:00:00.000000000 +0100 +++ smeserver-dhcpmanager-2.0.2.update/root/etc/e-smith/locale/de/etc/e-smith/web/functions/dhcpd 2015-08-17 02:31:45.554748244 +0200 @@ -0,0 +1,331 @@ + + + DHCP manager + DHCP Manager + + + DHCPD_TITLE + DHCP Manager + + + DHCPD_SETTINGS_TITLE + Settings of the DHCP server + + + CONNECTED_IP + Show DHCP Clients + + + SCAN_YOUR_NETWORK + Scan your network + + + GLOBAL_WINPOPUP + Send Global Netsend WinPopup + + + CHECK_CLIENT_STATUS + Always check the status of computers (Disabled is much faster) + + + SHOW_CONNECTED_IP_TITLE + Show all devices connected to the dhcp server : + + + SCAN_YOUR_NETWORK_TITLE + Scan your network to show active devices : + + + GLOBAL_WINPOPUP_TITLE + Send a global WinPopup with the Net send protocol + + + STATUS_DHCP_SERVER + State of DHCPD + + + DHCP_START + DHCP Start + + + DHCP_END + DHCP End + + + CUSTOM_WINSERVER_TITLE + Enable a WINS Server. + + + CUSTOM_WINSERVER_STATUS + WINS Server + + + CUSTOM_WINSERVER_ADDRESS + WINS Server address + + + CUSTOM_DNS_TITLE + Enable custom DNS servers. + + + CUSTOM_DNS_STATUS + Custom DNS + + + PRIMARY_DNS_ADDRESS + Primary DNS + + + SECONDARY_DNS_ADDRESS + Secondary DNS + + + CUSTOM_GATEWAY_TITLE + Enable a custom gateway address. + + + CUSTOM_GATEWAY_STATUS + Custom gateway + + + CUSTOM_GATEWAY_ADDRESS + Gateway address + + + CUSTOM_LEASETIME_TITLE + Set the lease time (default is 86400 seconds). + + + CUSTOM_LEASETIME + Custom lease time + + + SAVE_TITLE + After changing settings above, you must save and restart dhcpd. + + + SAVE/RESTART + Save/Restart + + + DHCPD_SETTING_ERRORS + DHCPd Settings ERRORS + + + DHCP_START_GREATER_DHCP_END_ERRORS + Incorrect range of IPs, the DHCP Start is greater than the DHCP End , Update unsuccessfull]]> + + + CLICK_HERE_TO_MAIN_PANEL + Click Here to return to the main panel]]> + + + DHCP_RANGE_MUST_NOT_INCLUDE_SERVER_IP + Incorrect range of IPs, the range of IP address allocation must not include the server address, Update unsuccessfull]]> + + + DHCP_RANGE_WITH_BAD_IP + Incorrect IP in the DHCP range, Update unsuccessfull]]> + + + WINSSERVER_BAD_IP + Incorrect IP for WINS Server, Update unsuccessfull]]> + + + DNS_SERVER_WITH_BAD_IP + Incorrect IP for DNS servers, Update unsuccessfull]]> + + + GATEWAY_BAD_IP + Incorrect IP for Gateway, Update unsuccessfull]]> + + + SUCCESSFULLY_SAVED_SETTINGS + Successfully saved settings]]> + + + REMOVE_A_DHCP_LEASE_TITLE + Removing a DHCP Lease + + + REMOVE_A_DHCP_LEASE + Remove an entry in dhcpd.leases + + + ARE_YOU_SURE + are you sure ? + + + REMOVE_A_DHCP_LEASE_ACTION + You are about to remove a client from the dhcpd.leases file. + + + SUCCESSFULLY_DELETED_THE_CLIENT + Successfully deleted in dhcpd.leases the client : ]]> + + + WAKING_A_REMOTE_COMPUTER_TITLE + Waking Up a remote computer + + + WAKING_A_REMOTE_COMPUTER + You are about to wake up a remote computer. + + + WAKING_A_REMOTE_COMPUTER_ACTION + Are you sure you want to wake on lan the client : + + + + WAKE_UP + Wake UP + + + REMOVE + Entfernen + + + SUCCESSFULLY_CLIENT_WOL_REQUEST + Successfully request to wake up the client. The computer may take time to wake up.]]> + + + ALL_OF_THEM + All of them + + + SENDING_A_WINPOPUP + Sending a WinPopup + + + SENDING_A_WINPOPUP_TO + You are about to send a WinPopup to + + + YOUR_MESSAGE + Ihre Nachricht + + + WRITE_YOUR_MESSAGE + Write your message here + + + DO_YOU_WANT_TO_SENT + Do you want to send this message to + + + SEND_WINPOPUP_TO + Send a WinPopup to + + + SUCCESSFULLY_SENT_MESSAGE + Successfully sent message popup to]]> + + + WARNING_NO_WINPOPUP_GARANTY + Warning, there is no garanty that the popup will appear on the remote computer.]]> + + + MANAGING_DHCP_CLIENT + Managing DHCP clients + + + STATUS_REPORT + Operation status report : + + + REFRESH_CONNECTED_IP_LIST + You may want to refresh this list ? + + + REFRESH + Refresh the list + + + CLEAN_ALL_DHCPLEASES + You may want to clean the dhcp.leases + + + REMOVE_ALL_LEASES + Remove all leases + + + NETWORK_NAME + Network Name + + + STATUS_CLICK_FOR_WOL + Status - click for WOL + + + START_DATE + Start Date + + + END_DATE + End Date + + + MAC_ADDRESS + MAC Address + + + NOT_CHECKED + Not Checked...]]> + + + ACTIVE_DEVICE + Active Device]]> + + + WAKE_UP_ACTION + Wake-Up...]]> + + + REMOVE_ACTION + Remove... + + + WINPOPUP_ACTION + WinPopup... + + + NO_CONNECTED_COMPUTERS + There are no connected computers + + + REMOVE_DHCP_LEASE_TITLE + Removing all DHCP Lease + + + REMOVE_DHCP_LEASE_WARNING + Remove all entries in dhcpd.leases may cause issues]]> + + + REMOVE_DHCP_LEASE_WARNING2 + The lease file is a log-structured file - whenever a lease changes, the contents of that lease are written to the end of the file. This means that it is entirely possible for there to be two or more declarations of the same lease in the lease file at the same time. In that case, the instance of that particular lease that appears last in the file is the one that is in effect. + + + SUCCESSFULLY_REMOVED_ALL_LEASES + Successfully deleted all leases.]]> + + + REMOVE_ALL_LEASES_ACTION + Remove all dhcp leases + + + SCANNING_NETWORK_TITLE + Scanning your network, the time needed depends of your subnet mask + + + NETWORK_VALUES_FOUND + Please wait .... Your subnet and your netmask appear to be : + + + ERROR_WHILE_REMOVING_ALL_LEASES + Error while removing all dhcp Leases]]> + + + ERROR_WHILE_SAVING_SETTINGS + Error while saving settings]]> + + --- smeserver-dhcpmanager-2.0.2/root/etc/e-smith/locale/el/etc/e-smith/web/functions/dhcpd 1970-01-01 01:00:00.000000000 +0100 +++ smeserver-dhcpmanager-2.0.2.update/root/etc/e-smith/locale/el/etc/e-smith/web/functions/dhcpd 2015-08-17 02:31:45.708748234 +0200 @@ -0,0 +1,331 @@ + + + DHCP manager + DHCP Manager + + + DHCPD_TITLE + DHCP Manager + + + DHCPD_SETTINGS_TITLE + Settings of the DHCP server + + + CONNECTED_IP + Show DHCP Clients + + + SCAN_YOUR_NETWORK + Scan your network + + + GLOBAL_WINPOPUP + Send Global Netsend WinPopup + + + CHECK_CLIENT_STATUS + Always check the status of computers (Disabled is much faster) + + + SHOW_CONNECTED_IP_TITLE + Show all devices connected to the dhcp server : + + + SCAN_YOUR_NETWORK_TITLE + Scan your network to show active devices : + + + GLOBAL_WINPOPUP_TITLE + Send a global WinPopup with the Net send protocol + + + STATUS_DHCP_SERVER + State of DHCPD + + + DHCP_START + DHCP Start + + + DHCP_END + DHCP End + + + CUSTOM_WINSERVER_TITLE + Enable a WINS Server. + + + CUSTOM_WINSERVER_STATUS + WINS Server + + + CUSTOM_WINSERVER_ADDRESS + WINS Server address + + + CUSTOM_DNS_TITLE + Enable custom DNS servers. + + + CUSTOM_DNS_STATUS + Custom DNS + + + PRIMARY_DNS_ADDRESS + Primary DNS + + + SECONDARY_DNS_ADDRESS + Secondary DNS + + + CUSTOM_GATEWAY_TITLE + Enable a custom gateway address. + + + CUSTOM_GATEWAY_STATUS + Custom gateway + + + CUSTOM_GATEWAY_ADDRESS + Gateway address + + + CUSTOM_LEASETIME_TITLE + Set the lease time (default is 86400 seconds). + + + CUSTOM_LEASETIME + Custom lease time + + + SAVE_TITLE + After changing settings above, you must save and restart dhcpd. + + + SAVE/RESTART + Save/Restart + + + DHCPD_SETTING_ERRORS + DHCPd Settings ERRORS + + + DHCP_START_GREATER_DHCP_END_ERRORS + Incorrect range of IPs, the DHCP Start is greater than the DHCP End , Update unsuccessfull]]> + + + CLICK_HERE_TO_MAIN_PANEL + Click Here to return to the main panel]]> + + + DHCP_RANGE_MUST_NOT_INCLUDE_SERVER_IP + Incorrect range of IPs, the range of IP address allocation must not include the server address, Update unsuccessfull]]> + + + DHCP_RANGE_WITH_BAD_IP + Incorrect IP in the DHCP range, Update unsuccessfull]]> + + + WINSSERVER_BAD_IP + Incorrect IP for WINS Server, Update unsuccessfull]]> + + + DNS_SERVER_WITH_BAD_IP + Incorrect IP for DNS servers, Update unsuccessfull]]> + + + GATEWAY_BAD_IP + Incorrect IP for Gateway, Update unsuccessfull]]> + + + SUCCESSFULLY_SAVED_SETTINGS + Successfully saved settings]]> + + + REMOVE_A_DHCP_LEASE_TITLE + Removing a DHCP Lease + + + REMOVE_A_DHCP_LEASE + Remove an entry in dhcpd.leases + + + ARE_YOU_SURE + are you sure ? + + + REMOVE_A_DHCP_LEASE_ACTION + You are about to remove a client from the dhcpd.leases file. + + + SUCCESSFULLY_DELETED_THE_CLIENT + Successfully deleted in dhcpd.leases the client : ]]> + + + WAKING_A_REMOTE_COMPUTER_TITLE + Waking Up a remote computer + + + WAKING_A_REMOTE_COMPUTER + You are about to wake up a remote computer. + + + WAKING_A_REMOTE_COMPUTER_ACTION + Are you sure you want to wake on lan the client : + + + + WAKE_UP + Wake UP + + + REMOVE + Διαγραφή + + + SUCCESSFULLY_CLIENT_WOL_REQUEST + Successfully request to wake up the client. The computer may take time to wake up.]]> + + + ALL_OF_THEM + All of them + + + SENDING_A_WINPOPUP + Sending a WinPopup + + + SENDING_A_WINPOPUP_TO + You are about to send a WinPopup to + + + YOUR_MESSAGE + Το μήνυμα σας + + + WRITE_YOUR_MESSAGE + Write your message here + + + DO_YOU_WANT_TO_SENT + Do you want to send this message to + + + SEND_WINPOPUP_TO + Send a WinPopup to + + + SUCCESSFULLY_SENT_MESSAGE + Successfully sent message popup to]]> + + + WARNING_NO_WINPOPUP_GARANTY + Warning, there is no garanty that the popup will appear on the remote computer.]]> + + + MANAGING_DHCP_CLIENT + Managing DHCP clients + + + STATUS_REPORT + Operation status report : + + + REFRESH_CONNECTED_IP_LIST + You may want to refresh this list ? + + + REFRESH + Refresh the list + + + CLEAN_ALL_DHCPLEASES + You may want to clean the dhcp.leases + + + REMOVE_ALL_LEASES + Remove all leases + + + NETWORK_NAME + Network Name + + + STATUS_CLICK_FOR_WOL + Status - click for WOL + + + START_DATE + Start Date + + + END_DATE + End Date + + + MAC_ADDRESS + MAC Address + + + NOT_CHECKED + Not Checked...]]> + + + ACTIVE_DEVICE + Active Device]]> + + + WAKE_UP_ACTION + Wake-Up...]]> + + + REMOVE_ACTION + Remove... + + + WINPOPUP_ACTION + WinPopup... + + + NO_CONNECTED_COMPUTERS + There are no connected computers + + + REMOVE_DHCP_LEASE_TITLE + Removing all DHCP Lease + + + REMOVE_DHCP_LEASE_WARNING + Remove all entries in dhcpd.leases may cause issues]]> + + + REMOVE_DHCP_LEASE_WARNING2 + The lease file is a log-structured file - whenever a lease changes, the contents of that lease are written to the end of the file. This means that it is entirely possible for there to be two or more declarations of the same lease in the lease file at the same time. In that case, the instance of that particular lease that appears last in the file is the one that is in effect. + + + SUCCESSFULLY_REMOVED_ALL_LEASES + Successfully deleted all leases.]]> + + + REMOVE_ALL_LEASES_ACTION + Remove all dhcp leases + + + SCANNING_NETWORK_TITLE + Scanning your network, the time needed depends of your subnet mask + + + NETWORK_VALUES_FOUND + Please wait .... Your subnet and your netmask appear to be : + + + ERROR_WHILE_REMOVING_ALL_LEASES + Error while removing all dhcp Leases]]> + + + ERROR_WHILE_SAVING_SETTINGS + Error while saving settings]]> + + --- smeserver-dhcpmanager-2.0.2/root/etc/e-smith/locale/en-us/etc/e-smith/web/functions/dhcpd 2015-08-13 14:43:24.000000000 +0200 +++ smeserver-dhcpmanager-2.0.2.update/root/etc/e-smith/locale/en-us/etc/e-smith/web/functions/dhcpd 2015-08-17 02:31:45.086748270 +0200 @@ -1,5 +1,3 @@ - DHCP manager --- smeserver-dhcpmanager-2.0.2/root/etc/e-smith/locale/es/etc/e-smith/web/functions/dhcpd 1970-01-01 01:00:00.000000000 +0100 +++ smeserver-dhcpmanager-2.0.2.update/root/etc/e-smith/locale/es/etc/e-smith/web/functions/dhcpd 2015-08-17 02:31:45.863748227 +0200 @@ -0,0 +1,331 @@ + + + DHCP manager + DHCP Manager + + + DHCPD_TITLE + DHCP Manager + + + DHCPD_SETTINGS_TITLE + Settings of the DHCP server + + + CONNECTED_IP + Show DHCP Clients + + + SCAN_YOUR_NETWORK + Scan your network + + + GLOBAL_WINPOPUP + Send Global Netsend WinPopup + + + CHECK_CLIENT_STATUS + Always check the status of computers (Disabled is much faster) + + + SHOW_CONNECTED_IP_TITLE + Show all devices connected to the dhcp server : + + + SCAN_YOUR_NETWORK_TITLE + Scan your network to show active devices : + + + GLOBAL_WINPOPUP_TITLE + Send a global WinPopup with the Net send protocol + + + STATUS_DHCP_SERVER + State of DHCPD + + + DHCP_START + DHCP Start + + + DHCP_END + DHCP End + + + CUSTOM_WINSERVER_TITLE + Enable a WINS Server. + + + CUSTOM_WINSERVER_STATUS + WINS Server + + + CUSTOM_WINSERVER_ADDRESS + WINS Server address + + + CUSTOM_DNS_TITLE + Enable custom DNS servers. + + + CUSTOM_DNS_STATUS + Custom DNS + + + PRIMARY_DNS_ADDRESS + Primary DNS + + + SECONDARY_DNS_ADDRESS + Secondary DNS + + + CUSTOM_GATEWAY_TITLE + Enable a custom gateway address. + + + CUSTOM_GATEWAY_STATUS + Custom gateway + + + CUSTOM_GATEWAY_ADDRESS + Gateway address + + + CUSTOM_LEASETIME_TITLE + Set the lease time (default is 86400 seconds). + + + CUSTOM_LEASETIME + Custom lease time + + + SAVE_TITLE + After changing settings above, you must save and restart dhcpd. + + + SAVE/RESTART + Save/Restart + + + DHCPD_SETTING_ERRORS + DHCPd Settings ERRORS + + + DHCP_START_GREATER_DHCP_END_ERRORS + Incorrect range of IPs, the DHCP Start is greater than the DHCP End , Update unsuccessfull]]> + + + CLICK_HERE_TO_MAIN_PANEL + Click Here to return to the main panel]]> + + + DHCP_RANGE_MUST_NOT_INCLUDE_SERVER_IP + Incorrect range of IPs, the range of IP address allocation must not include the server address, Update unsuccessfull]]> + + + DHCP_RANGE_WITH_BAD_IP + Incorrect IP in the DHCP range, Update unsuccessfull]]> + + + WINSSERVER_BAD_IP + Incorrect IP for WINS Server, Update unsuccessfull]]> + + + DNS_SERVER_WITH_BAD_IP + Incorrect IP for DNS servers, Update unsuccessfull]]> + + + GATEWAY_BAD_IP + Incorrect IP for Gateway, Update unsuccessfull]]> + + + SUCCESSFULLY_SAVED_SETTINGS + Successfully saved settings]]> + + + REMOVE_A_DHCP_LEASE_TITLE + Removing a DHCP Lease + + + REMOVE_A_DHCP_LEASE + Remove an entry in dhcpd.leases + + + ARE_YOU_SURE + are you sure ? + + + REMOVE_A_DHCP_LEASE_ACTION + You are about to remove a client from the dhcpd.leases file. + + + SUCCESSFULLY_DELETED_THE_CLIENT + Successfully deleted in dhcpd.leases the client : ]]> + + + WAKING_A_REMOTE_COMPUTER_TITLE + Waking Up a remote computer + + + WAKING_A_REMOTE_COMPUTER + You are about to wake up a remote computer. + + + WAKING_A_REMOTE_COMPUTER_ACTION + Are you sure you want to wake on lan the client : + + + + WAKE_UP + Wake UP + + + REMOVE + Eliminar + + + SUCCESSFULLY_CLIENT_WOL_REQUEST + Successfully request to wake up the client. The computer may take time to wake up.]]> + + + ALL_OF_THEM + All of them + + + SENDING_A_WINPOPUP + Sending a WinPopup + + + SENDING_A_WINPOPUP_TO + You are about to send a WinPopup to + + + YOUR_MESSAGE + Mensaje + + + WRITE_YOUR_MESSAGE + Write your message here + + + DO_YOU_WANT_TO_SENT + Do you want to send this message to + + + SEND_WINPOPUP_TO + Send a WinPopup to + + + SUCCESSFULLY_SENT_MESSAGE + Successfully sent message popup to]]> + + + WARNING_NO_WINPOPUP_GARANTY + Warning, there is no garanty that the popup will appear on the remote computer.]]> + + + MANAGING_DHCP_CLIENT + Managing DHCP clients + + + STATUS_REPORT + Operation status report : + + + REFRESH_CONNECTED_IP_LIST + You may want to refresh this list ? + + + REFRESH + Refresh the list + + + CLEAN_ALL_DHCPLEASES + You may want to clean the dhcp.leases + + + REMOVE_ALL_LEASES + Remove all leases + + + NETWORK_NAME + Network Name + + + STATUS_CLICK_FOR_WOL + Status - click for WOL + + + START_DATE + Start Date + + + END_DATE + End Date + + + MAC_ADDRESS + MAC Address + + + NOT_CHECKED + Not Checked...]]> + + + ACTIVE_DEVICE + Active Device]]> + + + WAKE_UP_ACTION + Wake-Up...]]> + + + REMOVE_ACTION + Remove... + + + WINPOPUP_ACTION + WinPopup... + + + NO_CONNECTED_COMPUTERS + There are no connected computers + + + REMOVE_DHCP_LEASE_TITLE + Removing all DHCP Lease + + + REMOVE_DHCP_LEASE_WARNING + Remove all entries in dhcpd.leases may cause issues]]> + + + REMOVE_DHCP_LEASE_WARNING2 + The lease file is a log-structured file - whenever a lease changes, the contents of that lease are written to the end of the file. This means that it is entirely possible for there to be two or more declarations of the same lease in the lease file at the same time. In that case, the instance of that particular lease that appears last in the file is the one that is in effect. + + + SUCCESSFULLY_REMOVED_ALL_LEASES + Successfully deleted all leases.]]> + + + REMOVE_ALL_LEASES_ACTION + Remove all dhcp leases + + + SCANNING_NETWORK_TITLE + Scanning your network, the time needed depends of your subnet mask + + + NETWORK_VALUES_FOUND + Please wait .... Your subnet and your netmask appear to be : + + + ERROR_WHILE_REMOVING_ALL_LEASES + Error while removing all dhcp Leases]]> + + + ERROR_WHILE_SAVING_SETTINGS + Error while saving settings]]> + + --- smeserver-dhcpmanager-2.0.2/root/etc/e-smith/locale/et/etc/e-smith/web/functions/dhcpd 1970-01-01 01:00:00.000000000 +0100 +++ smeserver-dhcpmanager-2.0.2.update/root/etc/e-smith/locale/et/etc/e-smith/web/functions/dhcpd 2015-08-17 02:31:46.018748219 +0200 @@ -0,0 +1,331 @@ + + + DHCP manager + DHCP Manager + + + DHCPD_TITLE + DHCP Manager + + + DHCPD_SETTINGS_TITLE + Settings of the DHCP server + + + CONNECTED_IP + Show DHCP Clients + + + SCAN_YOUR_NETWORK + Scan your network + + + GLOBAL_WINPOPUP + Send Global Netsend WinPopup + + + CHECK_CLIENT_STATUS + Always check the status of computers (Disabled is much faster) + + + SHOW_CONNECTED_IP_TITLE + Show all devices connected to the dhcp server : + + + SCAN_YOUR_NETWORK_TITLE + Scan your network to show active devices : + + + GLOBAL_WINPOPUP_TITLE + Send a global WinPopup with the Net send protocol + + + STATUS_DHCP_SERVER + State of DHCPD + + + DHCP_START + DHCP Start + + + DHCP_END + DHCP End + + + CUSTOM_WINSERVER_TITLE + Enable a WINS Server. + + + CUSTOM_WINSERVER_STATUS + WINS Server + + + CUSTOM_WINSERVER_ADDRESS + WINS Server address + + + CUSTOM_DNS_TITLE + Enable custom DNS servers. + + + CUSTOM_DNS_STATUS + Custom DNS + + + PRIMARY_DNS_ADDRESS + Primary DNS + + + SECONDARY_DNS_ADDRESS + Secondary DNS + + + CUSTOM_GATEWAY_TITLE + Enable a custom gateway address. + + + CUSTOM_GATEWAY_STATUS + Custom gateway + + + CUSTOM_GATEWAY_ADDRESS + Gateway address + + + CUSTOM_LEASETIME_TITLE + Set the lease time (default is 86400 seconds). + + + CUSTOM_LEASETIME + Custom lease time + + + SAVE_TITLE + After changing settings above, you must save and restart dhcpd. + + + SAVE/RESTART + Save/Restart + + + DHCPD_SETTING_ERRORS + DHCPd Settings ERRORS + + + DHCP_START_GREATER_DHCP_END_ERRORS + Incorrect range of IPs, the DHCP Start is greater than the DHCP End , Update unsuccessfull]]> + + + CLICK_HERE_TO_MAIN_PANEL + Click Here to return to the main panel]]> + + + DHCP_RANGE_MUST_NOT_INCLUDE_SERVER_IP + Incorrect range of IPs, the range of IP address allocation must not include the server address, Update unsuccessfull]]> + + + DHCP_RANGE_WITH_BAD_IP + Incorrect IP in the DHCP range, Update unsuccessfull]]> + + + WINSSERVER_BAD_IP + Incorrect IP for WINS Server, Update unsuccessfull]]> + + + DNS_SERVER_WITH_BAD_IP + Incorrect IP for DNS servers, Update unsuccessfull]]> + + + GATEWAY_BAD_IP + Incorrect IP for Gateway, Update unsuccessfull]]> + + + SUCCESSFULLY_SAVED_SETTINGS + Successfully saved settings]]> + + + REMOVE_A_DHCP_LEASE_TITLE + Removing a DHCP Lease + + + REMOVE_A_DHCP_LEASE + Remove an entry in dhcpd.leases + + + ARE_YOU_SURE + are you sure ? + + + REMOVE_A_DHCP_LEASE_ACTION + You are about to remove a client from the dhcpd.leases file. + + + SUCCESSFULLY_DELETED_THE_CLIENT + Successfully deleted in dhcpd.leases the client : ]]> + + + WAKING_A_REMOTE_COMPUTER_TITLE + Waking Up a remote computer + + + WAKING_A_REMOTE_COMPUTER + You are about to wake up a remote computer. + + + WAKING_A_REMOTE_COMPUTER_ACTION + Are you sure you want to wake on lan the client : + + + + WAKE_UP + Wake UP + + + REMOVE + Eemalda + + + SUCCESSFULLY_CLIENT_WOL_REQUEST + Successfully request to wake up the client. The computer may take time to wake up.]]> + + + ALL_OF_THEM + All of them + + + SENDING_A_WINPOPUP + Sending a WinPopup + + + SENDING_A_WINPOPUP_TO + You are about to send a WinPopup to + + + YOUR_MESSAGE + Your message + + + WRITE_YOUR_MESSAGE + Write your message here + + + DO_YOU_WANT_TO_SENT + Do you want to send this message to + + + SEND_WINPOPUP_TO + Send a WinPopup to + + + SUCCESSFULLY_SENT_MESSAGE + Successfully sent message popup to]]> + + + WARNING_NO_WINPOPUP_GARANTY + Warning, there is no garanty that the popup will appear on the remote computer.]]> + + + MANAGING_DHCP_CLIENT + Managing DHCP clients + + + STATUS_REPORT + Operation status report : + + + REFRESH_CONNECTED_IP_LIST + You may want to refresh this list ? + + + REFRESH + Refresh the list + + + CLEAN_ALL_DHCPLEASES + You may want to clean the dhcp.leases + + + REMOVE_ALL_LEASES + Remove all leases + + + NETWORK_NAME + Network Name + + + STATUS_CLICK_FOR_WOL + Status - click for WOL + + + START_DATE + Start Date + + + END_DATE + End Date + + + MAC_ADDRESS + MAC Address + + + NOT_CHECKED + Not Checked...]]> + + + ACTIVE_DEVICE + Active Device]]> + + + WAKE_UP_ACTION + Wake-Up...]]> + + + REMOVE_ACTION + Remove... + + + WINPOPUP_ACTION + WinPopup... + + + NO_CONNECTED_COMPUTERS + There are no connected computers + + + REMOVE_DHCP_LEASE_TITLE + Removing all DHCP Lease + + + REMOVE_DHCP_LEASE_WARNING + Remove all entries in dhcpd.leases may cause issues]]> + + + REMOVE_DHCP_LEASE_WARNING2 + The lease file is a log-structured file - whenever a lease changes, the contents of that lease are written to the end of the file. This means that it is entirely possible for there to be two or more declarations of the same lease in the lease file at the same time. In that case, the instance of that particular lease that appears last in the file is the one that is in effect. + + + SUCCESSFULLY_REMOVED_ALL_LEASES + Successfully deleted all leases.]]> + + + REMOVE_ALL_LEASES_ACTION + Remove all dhcp leases + + + SCANNING_NETWORK_TITLE + Scanning your network, the time needed depends of your subnet mask + + + NETWORK_VALUES_FOUND + Please wait .... Your subnet and your netmask appear to be : + + + ERROR_WHILE_REMOVING_ALL_LEASES + Error while removing all dhcp Leases]]> + + + ERROR_WHILE_SAVING_SETTINGS + Error while saving settings]]> + + --- smeserver-dhcpmanager-2.0.2/root/etc/e-smith/locale/fr/etc/e-smith/web/functions/dhcpd 1970-01-01 01:00:00.000000000 +0100 +++ smeserver-dhcpmanager-2.0.2.update/root/etc/e-smith/locale/fr/etc/e-smith/web/functions/dhcpd 2015-08-17 02:31:46.185748208 +0200 @@ -0,0 +1,331 @@ + + + DHCP manager + Gestionnaire du DHCP + + + DHCPD_TITLE + Gestionnaire du DHCP + + + DHCPD_SETTINGS_TITLE + Paramètres du serveur DHCP + + + CONNECTED_IP + Voir les clients DHCP + + + SCAN_YOUR_NETWORK + Scanner votre réseau + + + GLOBAL_WINPOPUP + Envoyer un message Netsend à tout le monde + + + CHECK_CLIENT_STATUS + Toujours vérifier le status des ordinateurs (désactivé est beaucoup plus rapide) + + + SHOW_CONNECTED_IP_TITLE + Montrer tous les périphériques connectés aux serveur dhcp : + + + SCAN_YOUR_NETWORK_TITLE + Scanner votre réseaux pour montrer les périphériques actifs : + + + GLOBAL_WINPOPUP_TITLE + Envoyer un message avec le protocole Netsend + + + STATUS_DHCP_SERVER + Etat de DHCPD + + + DHCP_START + Début de DHCP + + + DHCP_END + Fin de DHCP + + + CUSTOM_WINSERVER_TITLE + Activer un serveur Wins + + + CUSTOM_WINSERVER_STATUS + Serveur WINS + + + CUSTOM_WINSERVER_ADDRESS + Adresse du serveur WINS + + + CUSTOM_DNS_TITLE + Activer des serveurs DNS personnalisés + + + CUSTOM_DNS_STATUS + DNS personnalisés + + + PRIMARY_DNS_ADDRESS + Premier DNS + + + SECONDARY_DNS_ADDRESS + Second DNS + + + CUSTOM_GATEWAY_TITLE + Activer une passerelle personnalisée + + + CUSTOM_GATEWAY_STATUS + passerelle personnalisée + + + CUSTOM_GATEWAY_ADDRESS + adresse de la passerelle + + + CUSTOM_LEASETIME_TITLE + Définir la durée du bail (par défaut à 86400 secondes). + + + CUSTOM_LEASETIME + durée du bail dhcp + + + SAVE_TITLE + Après avoir changé les réglages, vous devez les sauvez et redémarrer dhcpd + + + SAVE/RESTART + Enregister/redémarrer + + + DHCPD_SETTING_ERRORS + Erreurs de paramètres de DHCPD + + + DHCP_START_GREATER_DHCP_END_ERRORS + La plage d'IP est incorrecte. L'adresse IP du début est supérieure à celle de la fin de la plage, Echec de la mise à jour]]> + + + CLICK_HERE_TO_MAIN_PANEL + Cliquez ici pour retournez au menu principal]]> + + + DHCP_RANGE_MUST_NOT_INCLUDE_SERVER_IP + La plage d'IP est incorrecte, La plage d'IP ne peut pas inclure l'adresse du serveur, Echec de la mise à jour]]> + + + DHCP_RANGE_WITH_BAD_IP + Adresse incorrecte dans la plage d'IP, Echec de la mise à jour]]> + + + WINSSERVER_BAD_IP + Adresse IP incorrecte pour le serveur WINS, Echec de la mise à jour]]> + + + DNS_SERVER_WITH_BAD_IP + Adresse IP incorrecte pour les serveurs DNS, Echec de la mise à jour]]> + + + GATEWAY_BAD_IP + Adresse IP incorrecte pour la passerelle, Echec de la mise à jour]]> + + + SUCCESSFULLY_SAVED_SETTINGS + Paramètres enregistrés avec succès]]> + + + REMOVE_A_DHCP_LEASE_TITLE + Effacer un bail DHCP + + + REMOVE_A_DHCP_LEASE + Retirer un bail dhcp dans le dhcpd.leases + + + ARE_YOU_SURE + Etes vous sure ? + + + REMOVE_A_DHCP_LEASE_ACTION + Vous êtes sur le point de retirer un client du dhcpd.leases. + + + SUCCESSFULLY_DELETED_THE_CLIENT + Le client a été retiré avec succès du dhcpd.leases : ]]> + + + WAKING_A_REMOTE_COMPUTER_TITLE + Réveiller un ordinateur distant. + + + WAKING_A_REMOTE_COMPUTER + Vous êtes sur le point de réveiller un ordinateur distant. + + + WAKING_A_REMOTE_COMPUTER_ACTION + Etes vous sure de vouloir réveiller (wake-on-lan) le client : + + + + WAKE_UP + Réveille toi + + + REMOVE + Supprimer + + + SUCCESSFULLY_CLIENT_WOL_REQUEST + Demande de réveil du client réussie. L'ordinateur peut prendre du temps pour se réveiller.]]> + + + ALL_OF_THEM + à tout le monde + + + SENDING_A_WINPOPUP + Envoyer un message + + + SENDING_A_WINPOPUP_TO + Vous êtes sur le point d'envoyer un message à + + + YOUR_MESSAGE + Votre message + + + WRITE_YOUR_MESSAGE + Écrivez votre message ici + + + DO_YOU_WANT_TO_SENT + Voulez vous envoyer votre message à + + + SEND_WINPOPUP_TO + envoyer un message WinPopup à + + + SUCCESSFULLY_SENT_MESSAGE + Envoi avec succès du message à]]> + + + WARNING_NO_WINPOPUP_GARANTY + Attention. Vous n'avez aucune garantie que le message sera affiché sur l'ordinateur distant]]> + + + MANAGING_DHCP_CLIENT + Gérer les clients DHCP + + + STATUS_REPORT + Rapport du statut de l’opération : + + + REFRESH_CONNECTED_IP_LIST + Vous souhaitez actualiser cette liste ? + + + REFRESH + Rafraichir la liste + + + CLEAN_ALL_DHCPLEASES + Vous pourriez vouloir nettoyer le dhcpd.leases + + + REMOVE_ALL_LEASES + Effacer tous les baux + + + NETWORK_NAME + Nom sur le réseau + + + STATUS_CLICK_FOR_WOL + Statut - cliquer pour wol + + + START_DATE + Date de début + + + END_DATE + Date de fin + + + MAC_ADDRESS + Adresse Mac + + + NOT_CHECKED + Non Vérifié...]]> + + + ACTIVE_DEVICE + Périphérique actif]]> + + + WAKE_UP_ACTION + Réveille toi...]]> + + + REMOVE_ACTION + Effacer... + + + WINPOPUP_ACTION + Message... + + + NO_CONNECTED_COMPUTERS + Il n'y a pas d'ordinateurs connectés + + + REMOVE_DHCP_LEASE_TITLE + Effacer tous les baux DHCP + + + REMOVE_DHCP_LEASE_WARNING + Effacer tous les baux du dhcpd.lease peut causer de sérieux problèmes]]> + + + REMOVE_DHCP_LEASE_WARNING2 + Le fichier de bail dhcp est un fichier journal structuré. A chaque fois qu'un bail change, le contenu de ce bail est écrit à la fin du fichier. Cela signifie qu'il est tout à fait possible qu'il y ait deux ou plusieurs déclarations du même bail dans le fichier en même temps. Dans ce cas, le bail qui apparaît le dernier dans le fichier est celui qui est utilisé. + + + SUCCESSFULLY_REMOVED_ALL_LEASES + Le dhcpd.lease a été effacé avec succès.]]> + + + REMOVE_ALL_LEASES_ACTION + Effacer tous les baux dhcp + + + SCANNING_NETWORK_TITLE + En train de scanner votre réseau. Le temps nécessaire dépend du masque de sous-réseau. + + + NETWORK_VALUES_FOUND + Attendez s'il vous plait ... Votre réseau et votre masque de sous-réseau semble être : + + + ERROR_WHILE_REMOVING_ALL_LEASES + Erreur pendant la suppression du dhcpd.lease]]> + + + ERROR_WHILE_SAVING_SETTINGS + Erreur pendant l'enregistrement des paramètres]]> + + --- smeserver-dhcpmanager-2.0.2/root/etc/e-smith/locale/he/etc/e-smith/web/functions/dhcpd 1970-01-01 01:00:00.000000000 +0100 +++ smeserver-dhcpmanager-2.0.2.update/root/etc/e-smith/locale/he/etc/e-smith/web/functions/dhcpd 2015-08-17 02:31:46.360748198 +0200 @@ -0,0 +1,331 @@ + + + DHCP manager + DHCP Manager + + + DHCPD_TITLE + DHCP Manager + + + DHCPD_SETTINGS_TITLE + Settings of the DHCP server + + + CONNECTED_IP + Show DHCP Clients + + + SCAN_YOUR_NETWORK + Scan your network + + + GLOBAL_WINPOPUP + Send Global Netsend WinPopup + + + CHECK_CLIENT_STATUS + Always check the status of computers (Disabled is much faster) + + + SHOW_CONNECTED_IP_TITLE + Show all devices connected to the dhcp server : + + + SCAN_YOUR_NETWORK_TITLE + Scan your network to show active devices : + + + GLOBAL_WINPOPUP_TITLE + Send a global WinPopup with the Net send protocol + + + STATUS_DHCP_SERVER + State of DHCPD + + + DHCP_START + DHCP Start + + + DHCP_END + DHCP End + + + CUSTOM_WINSERVER_TITLE + Enable a WINS Server. + + + CUSTOM_WINSERVER_STATUS + WINS Server + + + CUSTOM_WINSERVER_ADDRESS + WINS Server address + + + CUSTOM_DNS_TITLE + Enable custom DNS servers. + + + CUSTOM_DNS_STATUS + Custom DNS + + + PRIMARY_DNS_ADDRESS + Primary DNS + + + SECONDARY_DNS_ADDRESS + Secondary DNS + + + CUSTOM_GATEWAY_TITLE + Enable a custom gateway address. + + + CUSTOM_GATEWAY_STATUS + Custom gateway + + + CUSTOM_GATEWAY_ADDRESS + Gateway address + + + CUSTOM_LEASETIME_TITLE + Set the lease time (default is 86400 seconds). + + + CUSTOM_LEASETIME + Custom lease time + + + SAVE_TITLE + After changing settings above, you must save and restart dhcpd. + + + SAVE/RESTART + Save/Restart + + + DHCPD_SETTING_ERRORS + DHCPd Settings ERRORS + + + DHCP_START_GREATER_DHCP_END_ERRORS + Incorrect range of IPs, the DHCP Start is greater than the DHCP End , Update unsuccessfull]]> + + + CLICK_HERE_TO_MAIN_PANEL + Click Here to return to the main panel]]> + + + DHCP_RANGE_MUST_NOT_INCLUDE_SERVER_IP + Incorrect range of IPs, the range of IP address allocation must not include the server address, Update unsuccessfull]]> + + + DHCP_RANGE_WITH_BAD_IP + Incorrect IP in the DHCP range, Update unsuccessfull]]> + + + WINSSERVER_BAD_IP + Incorrect IP for WINS Server, Update unsuccessfull]]> + + + DNS_SERVER_WITH_BAD_IP + Incorrect IP for DNS servers, Update unsuccessfull]]> + + + GATEWAY_BAD_IP + Incorrect IP for Gateway, Update unsuccessfull]]> + + + SUCCESSFULLY_SAVED_SETTINGS + Successfully saved settings]]> + + + REMOVE_A_DHCP_LEASE_TITLE + Removing a DHCP Lease + + + REMOVE_A_DHCP_LEASE + Remove an entry in dhcpd.leases + + + ARE_YOU_SURE + are you sure ? + + + REMOVE_A_DHCP_LEASE_ACTION + You are about to remove a client from the dhcpd.leases file. + + + SUCCESSFULLY_DELETED_THE_CLIENT + Successfully deleted in dhcpd.leases the client : ]]> + + + WAKING_A_REMOTE_COMPUTER_TITLE + Waking Up a remote computer + + + WAKING_A_REMOTE_COMPUTER + You are about to wake up a remote computer. + + + WAKING_A_REMOTE_COMPUTER_ACTION + Are you sure you want to wake on lan the client : + + + + WAKE_UP + Wake UP + + + REMOVE + הסרה + + + SUCCESSFULLY_CLIENT_WOL_REQUEST + Successfully request to wake up the client. The computer may take time to wake up.]]> + + + ALL_OF_THEM + All of them + + + SENDING_A_WINPOPUP + Sending a WinPopup + + + SENDING_A_WINPOPUP_TO + You are about to send a WinPopup to + + + YOUR_MESSAGE + Your message + + + WRITE_YOUR_MESSAGE + Write your message here + + + DO_YOU_WANT_TO_SENT + Do you want to send this message to + + + SEND_WINPOPUP_TO + Send a WinPopup to + + + SUCCESSFULLY_SENT_MESSAGE + Successfully sent message popup to]]> + + + WARNING_NO_WINPOPUP_GARANTY + Warning, there is no garanty that the popup will appear on the remote computer.]]> + + + MANAGING_DHCP_CLIENT + Managing DHCP clients + + + STATUS_REPORT + Operation status report : + + + REFRESH_CONNECTED_IP_LIST + You may want to refresh this list ? + + + REFRESH + Refresh the list + + + CLEAN_ALL_DHCPLEASES + You may want to clean the dhcp.leases + + + REMOVE_ALL_LEASES + Remove all leases + + + NETWORK_NAME + Network Name + + + STATUS_CLICK_FOR_WOL + Status - click for WOL + + + START_DATE + Start Date + + + END_DATE + End Date + + + MAC_ADDRESS + MAC Address + + + NOT_CHECKED + Not Checked...]]> + + + ACTIVE_DEVICE + Active Device]]> + + + WAKE_UP_ACTION + Wake-Up...]]> + + + REMOVE_ACTION + Remove... + + + WINPOPUP_ACTION + WinPopup... + + + NO_CONNECTED_COMPUTERS + There are no connected computers + + + REMOVE_DHCP_LEASE_TITLE + Removing all DHCP Lease + + + REMOVE_DHCP_LEASE_WARNING + Remove all entries in dhcpd.leases may cause issues]]> + + + REMOVE_DHCP_LEASE_WARNING2 + The lease file is a log-structured file - whenever a lease changes, the contents of that lease are written to the end of the file. This means that it is entirely possible for there to be two or more declarations of the same lease in the lease file at the same time. In that case, the instance of that particular lease that appears last in the file is the one that is in effect. + + + SUCCESSFULLY_REMOVED_ALL_LEASES + Successfully deleted all leases.]]> + + + REMOVE_ALL_LEASES_ACTION + Remove all dhcp leases + + + SCANNING_NETWORK_TITLE + Scanning your network, the time needed depends of your subnet mask + + + NETWORK_VALUES_FOUND + Please wait .... Your subnet and your netmask appear to be : + + + ERROR_WHILE_REMOVING_ALL_LEASES + Error while removing all dhcp Leases]]> + + + ERROR_WHILE_SAVING_SETTINGS + Error while saving settings]]> + + --- smeserver-dhcpmanager-2.0.2/root/etc/e-smith/locale/hu/etc/e-smith/web/functions/dhcpd 1970-01-01 01:00:00.000000000 +0100 +++ smeserver-dhcpmanager-2.0.2.update/root/etc/e-smith/locale/hu/etc/e-smith/web/functions/dhcpd 2015-08-17 02:31:46.519748189 +0200 @@ -0,0 +1,331 @@ + + + DHCP manager + DHCP Manager + + + DHCPD_TITLE + DHCP Manager + + + DHCPD_SETTINGS_TITLE + Settings of the DHCP server + + + CONNECTED_IP + Show DHCP Clients + + + SCAN_YOUR_NETWORK + Scan your network + + + GLOBAL_WINPOPUP + Send Global Netsend WinPopup + + + CHECK_CLIENT_STATUS + Always check the status of computers (Disabled is much faster) + + + SHOW_CONNECTED_IP_TITLE + Show all devices connected to the dhcp server : + + + SCAN_YOUR_NETWORK_TITLE + Scan your network to show active devices : + + + GLOBAL_WINPOPUP_TITLE + Send a global WinPopup with the Net send protocol + + + STATUS_DHCP_SERVER + State of DHCPD + + + DHCP_START + DHCP Start + + + DHCP_END + DHCP End + + + CUSTOM_WINSERVER_TITLE + Enable a WINS Server. + + + CUSTOM_WINSERVER_STATUS + WINS Server + + + CUSTOM_WINSERVER_ADDRESS + WINS Server address + + + CUSTOM_DNS_TITLE + Enable custom DNS servers. + + + CUSTOM_DNS_STATUS + Custom DNS + + + PRIMARY_DNS_ADDRESS + Primary DNS + + + SECONDARY_DNS_ADDRESS + Secondary DNS + + + CUSTOM_GATEWAY_TITLE + Enable a custom gateway address. + + + CUSTOM_GATEWAY_STATUS + Custom gateway + + + CUSTOM_GATEWAY_ADDRESS + Gateway address + + + CUSTOM_LEASETIME_TITLE + Set the lease time (default is 86400 seconds). + + + CUSTOM_LEASETIME + Custom lease time + + + SAVE_TITLE + After changing settings above, you must save and restart dhcpd. + + + SAVE/RESTART + Save/Restart + + + DHCPD_SETTING_ERRORS + DHCPd Settings ERRORS + + + DHCP_START_GREATER_DHCP_END_ERRORS + Incorrect range of IPs, the DHCP Start is greater than the DHCP End , Update unsuccessfull]]> + + + CLICK_HERE_TO_MAIN_PANEL + Click Here to return to the main panel]]> + + + DHCP_RANGE_MUST_NOT_INCLUDE_SERVER_IP + Incorrect range of IPs, the range of IP address allocation must not include the server address, Update unsuccessfull]]> + + + DHCP_RANGE_WITH_BAD_IP + Incorrect IP in the DHCP range, Update unsuccessfull]]> + + + WINSSERVER_BAD_IP + Incorrect IP for WINS Server, Update unsuccessfull]]> + + + DNS_SERVER_WITH_BAD_IP + Incorrect IP for DNS servers, Update unsuccessfull]]> + + + GATEWAY_BAD_IP + Incorrect IP for Gateway, Update unsuccessfull]]> + + + SUCCESSFULLY_SAVED_SETTINGS + Successfully saved settings]]> + + + REMOVE_A_DHCP_LEASE_TITLE + Removing a DHCP Lease + + + REMOVE_A_DHCP_LEASE + Remove an entry in dhcpd.leases + + + ARE_YOU_SURE + are you sure ? + + + REMOVE_A_DHCP_LEASE_ACTION + You are about to remove a client from the dhcpd.leases file. + + + SUCCESSFULLY_DELETED_THE_CLIENT + Successfully deleted in dhcpd.leases the client : ]]> + + + WAKING_A_REMOTE_COMPUTER_TITLE + Waking Up a remote computer + + + WAKING_A_REMOTE_COMPUTER + You are about to wake up a remote computer. + + + WAKING_A_REMOTE_COMPUTER_ACTION + Are you sure you want to wake on lan the client : + + + + WAKE_UP + Wake UP + + + REMOVE + Eltávolít + + + SUCCESSFULLY_CLIENT_WOL_REQUEST + Successfully request to wake up the client. The computer may take time to wake up.]]> + + + ALL_OF_THEM + All of them + + + SENDING_A_WINPOPUP + Sending a WinPopup + + + SENDING_A_WINPOPUP_TO + You are about to send a WinPopup to + + + YOUR_MESSAGE + Az Ön üzenete + + + WRITE_YOUR_MESSAGE + Write your message here + + + DO_YOU_WANT_TO_SENT + Do you want to send this message to + + + SEND_WINPOPUP_TO + Send a WinPopup to + + + SUCCESSFULLY_SENT_MESSAGE + Successfully sent message popup to]]> + + + WARNING_NO_WINPOPUP_GARANTY + Warning, there is no garanty that the popup will appear on the remote computer.]]> + + + MANAGING_DHCP_CLIENT + Managing DHCP clients + + + STATUS_REPORT + Operation status report : + + + REFRESH_CONNECTED_IP_LIST + You may want to refresh this list ? + + + REFRESH + Refresh the list + + + CLEAN_ALL_DHCPLEASES + You may want to clean the dhcp.leases + + + REMOVE_ALL_LEASES + Remove all leases + + + NETWORK_NAME + Network Name + + + STATUS_CLICK_FOR_WOL + Status - click for WOL + + + START_DATE + Start Date + + + END_DATE + End Date + + + MAC_ADDRESS + MAC Address + + + NOT_CHECKED + Not Checked...]]> + + + ACTIVE_DEVICE + Active Device]]> + + + WAKE_UP_ACTION + Wake-Up...]]> + + + REMOVE_ACTION + Remove... + + + WINPOPUP_ACTION + WinPopup... + + + NO_CONNECTED_COMPUTERS + There are no connected computers + + + REMOVE_DHCP_LEASE_TITLE + Removing all DHCP Lease + + + REMOVE_DHCP_LEASE_WARNING + Remove all entries in dhcpd.leases may cause issues]]> + + + REMOVE_DHCP_LEASE_WARNING2 + The lease file is a log-structured file - whenever a lease changes, the contents of that lease are written to the end of the file. This means that it is entirely possible for there to be two or more declarations of the same lease in the lease file at the same time. In that case, the instance of that particular lease that appears last in the file is the one that is in effect. + + + SUCCESSFULLY_REMOVED_ALL_LEASES + Successfully deleted all leases.]]> + + + REMOVE_ALL_LEASES_ACTION + Remove all dhcp leases + + + SCANNING_NETWORK_TITLE + Scanning your network, the time needed depends of your subnet mask + + + NETWORK_VALUES_FOUND + Please wait .... Your subnet and your netmask appear to be : + + + ERROR_WHILE_REMOVING_ALL_LEASES + Error while removing all dhcp Leases]]> + + + ERROR_WHILE_SAVING_SETTINGS + Error while saving settings]]> + + --- smeserver-dhcpmanager-2.0.2/root/etc/e-smith/locale/id/etc/e-smith/web/functions/dhcpd 1970-01-01 01:00:00.000000000 +0100 +++ smeserver-dhcpmanager-2.0.2.update/root/etc/e-smith/locale/id/etc/e-smith/web/functions/dhcpd 2015-08-17 02:31:46.671748181 +0200 @@ -0,0 +1,331 @@ + + + DHCP manager + DHCP Manager + + + DHCPD_TITLE + DHCP Manager + + + DHCPD_SETTINGS_TITLE + Settings of the DHCP server + + + CONNECTED_IP + Show DHCP Clients + + + SCAN_YOUR_NETWORK + Scan your network + + + GLOBAL_WINPOPUP + Send Global Netsend WinPopup + + + CHECK_CLIENT_STATUS + Always check the status of computers (Disabled is much faster) + + + SHOW_CONNECTED_IP_TITLE + Show all devices connected to the dhcp server : + + + SCAN_YOUR_NETWORK_TITLE + Scan your network to show active devices : + + + GLOBAL_WINPOPUP_TITLE + Send a global WinPopup with the Net send protocol + + + STATUS_DHCP_SERVER + State of DHCPD + + + DHCP_START + DHCP Start + + + DHCP_END + DHCP End + + + CUSTOM_WINSERVER_TITLE + Enable a WINS Server. + + + CUSTOM_WINSERVER_STATUS + WINS Server + + + CUSTOM_WINSERVER_ADDRESS + WINS Server address + + + CUSTOM_DNS_TITLE + Enable custom DNS servers. + + + CUSTOM_DNS_STATUS + Custom DNS + + + PRIMARY_DNS_ADDRESS + Primary DNS + + + SECONDARY_DNS_ADDRESS + Secondary DNS + + + CUSTOM_GATEWAY_TITLE + Enable a custom gateway address. + + + CUSTOM_GATEWAY_STATUS + Custom gateway + + + CUSTOM_GATEWAY_ADDRESS + Gateway address + + + CUSTOM_LEASETIME_TITLE + Set the lease time (default is 86400 seconds). + + + CUSTOM_LEASETIME + Custom lease time + + + SAVE_TITLE + After changing settings above, you must save and restart dhcpd. + + + SAVE/RESTART + Save/Restart + + + DHCPD_SETTING_ERRORS + DHCPd Settings ERRORS + + + DHCP_START_GREATER_DHCP_END_ERRORS + Incorrect range of IPs, the DHCP Start is greater than the DHCP End , Update unsuccessfull]]> + + + CLICK_HERE_TO_MAIN_PANEL + Click Here to return to the main panel]]> + + + DHCP_RANGE_MUST_NOT_INCLUDE_SERVER_IP + Incorrect range of IPs, the range of IP address allocation must not include the server address, Update unsuccessfull]]> + + + DHCP_RANGE_WITH_BAD_IP + Incorrect IP in the DHCP range, Update unsuccessfull]]> + + + WINSSERVER_BAD_IP + Incorrect IP for WINS Server, Update unsuccessfull]]> + + + DNS_SERVER_WITH_BAD_IP + Incorrect IP for DNS servers, Update unsuccessfull]]> + + + GATEWAY_BAD_IP + Incorrect IP for Gateway, Update unsuccessfull]]> + + + SUCCESSFULLY_SAVED_SETTINGS + Successfully saved settings]]> + + + REMOVE_A_DHCP_LEASE_TITLE + Removing a DHCP Lease + + + REMOVE_A_DHCP_LEASE + Remove an entry in dhcpd.leases + + + ARE_YOU_SURE + are you sure ? + + + REMOVE_A_DHCP_LEASE_ACTION + You are about to remove a client from the dhcpd.leases file. + + + SUCCESSFULLY_DELETED_THE_CLIENT + Successfully deleted in dhcpd.leases the client : ]]> + + + WAKING_A_REMOTE_COMPUTER_TITLE + Waking Up a remote computer + + + WAKING_A_REMOTE_COMPUTER + You are about to wake up a remote computer. + + + WAKING_A_REMOTE_COMPUTER_ACTION + Are you sure you want to wake on lan the client : + + + + WAKE_UP + Wake UP + + + REMOVE + Hapus + + + SUCCESSFULLY_CLIENT_WOL_REQUEST + Successfully request to wake up the client. The computer may take time to wake up.]]> + + + ALL_OF_THEM + All of them + + + SENDING_A_WINPOPUP + Sending a WinPopup + + + SENDING_A_WINPOPUP_TO + You are about to send a WinPopup to + + + YOUR_MESSAGE + Your message + + + WRITE_YOUR_MESSAGE + Write your message here + + + DO_YOU_WANT_TO_SENT + Do you want to send this message to + + + SEND_WINPOPUP_TO + Send a WinPopup to + + + SUCCESSFULLY_SENT_MESSAGE + Successfully sent message popup to]]> + + + WARNING_NO_WINPOPUP_GARANTY + Warning, there is no garanty that the popup will appear on the remote computer.]]> + + + MANAGING_DHCP_CLIENT + Managing DHCP clients + + + STATUS_REPORT + Operation status report : + + + REFRESH_CONNECTED_IP_LIST + You may want to refresh this list ? + + + REFRESH + Refresh the list + + + CLEAN_ALL_DHCPLEASES + You may want to clean the dhcp.leases + + + REMOVE_ALL_LEASES + Remove all leases + + + NETWORK_NAME + Network Name + + + STATUS_CLICK_FOR_WOL + Status - click for WOL + + + START_DATE + Start Date + + + END_DATE + End Date + + + MAC_ADDRESS + MAC Address + + + NOT_CHECKED + Not Checked...]]> + + + ACTIVE_DEVICE + Active Device]]> + + + WAKE_UP_ACTION + Wake-Up...]]> + + + REMOVE_ACTION + Remove... + + + WINPOPUP_ACTION + WinPopup... + + + NO_CONNECTED_COMPUTERS + There are no connected computers + + + REMOVE_DHCP_LEASE_TITLE + Removing all DHCP Lease + + + REMOVE_DHCP_LEASE_WARNING + Remove all entries in dhcpd.leases may cause issues]]> + + + REMOVE_DHCP_LEASE_WARNING2 + The lease file is a log-structured file - whenever a lease changes, the contents of that lease are written to the end of the file. This means that it is entirely possible for there to be two or more declarations of the same lease in the lease file at the same time. In that case, the instance of that particular lease that appears last in the file is the one that is in effect. + + + SUCCESSFULLY_REMOVED_ALL_LEASES + Successfully deleted all leases.]]> + + + REMOVE_ALL_LEASES_ACTION + Remove all dhcp leases + + + SCANNING_NETWORK_TITLE + Scanning your network, the time needed depends of your subnet mask + + + NETWORK_VALUES_FOUND + Please wait .... Your subnet and your netmask appear to be : + + + ERROR_WHILE_REMOVING_ALL_LEASES + Error while removing all dhcp Leases]]> + + + ERROR_WHILE_SAVING_SETTINGS + Error while saving settings]]> + + --- smeserver-dhcpmanager-2.0.2/root/etc/e-smith/locale/it/etc/e-smith/web/functions/dhcpd 1970-01-01 01:00:00.000000000 +0100 +++ smeserver-dhcpmanager-2.0.2.update/root/etc/e-smith/locale/it/etc/e-smith/web/functions/dhcpd 2015-08-17 02:31:46.834748171 +0200 @@ -0,0 +1,331 @@ + + + DHCP manager + DHCP Manager + + + DHCPD_TITLE + DHCP Manager + + + DHCPD_SETTINGS_TITLE + Settings of the DHCP server + + + CONNECTED_IP + Show DHCP Clients + + + SCAN_YOUR_NETWORK + Scan your network + + + GLOBAL_WINPOPUP + Send Global Netsend WinPopup + + + CHECK_CLIENT_STATUS + Always check the status of computers (Disabled is much faster) + + + SHOW_CONNECTED_IP_TITLE + Show all devices connected to the dhcp server : + + + SCAN_YOUR_NETWORK_TITLE + Scan your network to show active devices : + + + GLOBAL_WINPOPUP_TITLE + Send a global WinPopup with the Net send protocol + + + STATUS_DHCP_SERVER + State of DHCPD + + + DHCP_START + DHCP Start + + + DHCP_END + DHCP End + + + CUSTOM_WINSERVER_TITLE + Enable a WINS Server. + + + CUSTOM_WINSERVER_STATUS + WINS Server + + + CUSTOM_WINSERVER_ADDRESS + WINS Server address + + + CUSTOM_DNS_TITLE + Enable custom DNS servers. + + + CUSTOM_DNS_STATUS + Custom DNS + + + PRIMARY_DNS_ADDRESS + Primary DNS + + + SECONDARY_DNS_ADDRESS + Secondary DNS + + + CUSTOM_GATEWAY_TITLE + Enable a custom gateway address. + + + CUSTOM_GATEWAY_STATUS + Custom gateway + + + CUSTOM_GATEWAY_ADDRESS + Gateway address + + + CUSTOM_LEASETIME_TITLE + Set the lease time (default is 86400 seconds). + + + CUSTOM_LEASETIME + Custom lease time + + + SAVE_TITLE + After changing settings above, you must save and restart dhcpd. + + + SAVE/RESTART + Save/Restart + + + DHCPD_SETTING_ERRORS + DHCPd Settings ERRORS + + + DHCP_START_GREATER_DHCP_END_ERRORS + Incorrect range of IPs, the DHCP Start is greater than the DHCP End , Update unsuccessfull]]> + + + CLICK_HERE_TO_MAIN_PANEL + Click Here to return to the main panel]]> + + + DHCP_RANGE_MUST_NOT_INCLUDE_SERVER_IP + Incorrect range of IPs, the range of IP address allocation must not include the server address, Update unsuccessfull]]> + + + DHCP_RANGE_WITH_BAD_IP + Incorrect IP in the DHCP range, Update unsuccessfull]]> + + + WINSSERVER_BAD_IP + Incorrect IP for WINS Server, Update unsuccessfull]]> + + + DNS_SERVER_WITH_BAD_IP + Incorrect IP for DNS servers, Update unsuccessfull]]> + + + GATEWAY_BAD_IP + Incorrect IP for Gateway, Update unsuccessfull]]> + + + SUCCESSFULLY_SAVED_SETTINGS + Successfully saved settings]]> + + + REMOVE_A_DHCP_LEASE_TITLE + Removing a DHCP Lease + + + REMOVE_A_DHCP_LEASE + Remove an entry in dhcpd.leases + + + ARE_YOU_SURE + are you sure ? + + + REMOVE_A_DHCP_LEASE_ACTION + You are about to remove a client from the dhcpd.leases file. + + + SUCCESSFULLY_DELETED_THE_CLIENT + Successfully deleted in dhcpd.leases the client : ]]> + + + WAKING_A_REMOTE_COMPUTER_TITLE + Waking Up a remote computer + + + WAKING_A_REMOTE_COMPUTER + You are about to wake up a remote computer. + + + WAKING_A_REMOTE_COMPUTER_ACTION + Are you sure you want to wake on lan the client : + + + + WAKE_UP + Wake UP + + + REMOVE + Rimuovi + + + SUCCESSFULLY_CLIENT_WOL_REQUEST + Successfully request to wake up the client. The computer may take time to wake up.]]> + + + ALL_OF_THEM + All of them + + + SENDING_A_WINPOPUP + Sending a WinPopup + + + SENDING_A_WINPOPUP_TO + You are about to send a WinPopup to + + + YOUR_MESSAGE + Il tuo messaggio + + + WRITE_YOUR_MESSAGE + Write your message here + + + DO_YOU_WANT_TO_SENT + Do you want to send this message to + + + SEND_WINPOPUP_TO + Send a WinPopup to + + + SUCCESSFULLY_SENT_MESSAGE + Successfully sent message popup to]]> + + + WARNING_NO_WINPOPUP_GARANTY + Warning, there is no garanty that the popup will appear on the remote computer.]]> + + + MANAGING_DHCP_CLIENT + Managing DHCP clients + + + STATUS_REPORT + Operation status report : + + + REFRESH_CONNECTED_IP_LIST + You may want to refresh this list ? + + + REFRESH + Refresh the list + + + CLEAN_ALL_DHCPLEASES + You may want to clean the dhcp.leases + + + REMOVE_ALL_LEASES + Remove all leases + + + NETWORK_NAME + Network Name + + + STATUS_CLICK_FOR_WOL + Status - click for WOL + + + START_DATE + Start Date + + + END_DATE + End Date + + + MAC_ADDRESS + MAC Address + + + NOT_CHECKED + Not Checked...]]> + + + ACTIVE_DEVICE + Active Device]]> + + + WAKE_UP_ACTION + Wake-Up...]]> + + + REMOVE_ACTION + Remove... + + + WINPOPUP_ACTION + WinPopup... + + + NO_CONNECTED_COMPUTERS + There are no connected computers + + + REMOVE_DHCP_LEASE_TITLE + Removing all DHCP Lease + + + REMOVE_DHCP_LEASE_WARNING + Remove all entries in dhcpd.leases may cause issues]]> + + + REMOVE_DHCP_LEASE_WARNING2 + The lease file is a log-structured file - whenever a lease changes, the contents of that lease are written to the end of the file. This means that it is entirely possible for there to be two or more declarations of the same lease in the lease file at the same time. In that case, the instance of that particular lease that appears last in the file is the one that is in effect. + + + SUCCESSFULLY_REMOVED_ALL_LEASES + Successfully deleted all leases.]]> + + + REMOVE_ALL_LEASES_ACTION + Remove all dhcp leases + + + SCANNING_NETWORK_TITLE + Scanning your network, the time needed depends of your subnet mask + + + NETWORK_VALUES_FOUND + Please wait .... Your subnet and your netmask appear to be : + + + ERROR_WHILE_REMOVING_ALL_LEASES + Error while removing all dhcp Leases]]> + + + ERROR_WHILE_SAVING_SETTINGS + Error while saving settings]]> + + --- smeserver-dhcpmanager-2.0.2/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/dhcpd 1970-01-01 01:00:00.000000000 +0100 +++ smeserver-dhcpmanager-2.0.2.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/dhcpd 2015-08-17 02:31:46.993748161 +0200 @@ -0,0 +1,331 @@ + + + DHCP manager + DHCP Manager + + + DHCPD_TITLE + DHCP Manager + + + DHCPD_SETTINGS_TITLE + Settings of the DHCP server + + + CONNECTED_IP + Show DHCP Clients + + + SCAN_YOUR_NETWORK + Scan your network + + + GLOBAL_WINPOPUP + Send Global Netsend WinPopup + + + CHECK_CLIENT_STATUS + Always check the status of computers (Disabled is much faster) + + + SHOW_CONNECTED_IP_TITLE + Show all devices connected to the dhcp server : + + + SCAN_YOUR_NETWORK_TITLE + Scan your network to show active devices : + + + GLOBAL_WINPOPUP_TITLE + Send a global WinPopup with the Net send protocol + + + STATUS_DHCP_SERVER + State of DHCPD + + + DHCP_START + DHCP Start + + + DHCP_END + DHCP End + + + CUSTOM_WINSERVER_TITLE + Enable a WINS Server. + + + CUSTOM_WINSERVER_STATUS + WINS Server + + + CUSTOM_WINSERVER_ADDRESS + WINS Server address + + + CUSTOM_DNS_TITLE + Enable custom DNS servers. + + + CUSTOM_DNS_STATUS + Custom DNS + + + PRIMARY_DNS_ADDRESS + Primary DNS + + + SECONDARY_DNS_ADDRESS + Secondary DNS + + + CUSTOM_GATEWAY_TITLE + Enable a custom gateway address. + + + CUSTOM_GATEWAY_STATUS + Custom gateway + + + CUSTOM_GATEWAY_ADDRESS + Gateway address + + + CUSTOM_LEASETIME_TITLE + Set the lease time (default is 86400 seconds). + + + CUSTOM_LEASETIME + Custom lease time + + + SAVE_TITLE + After changing settings above, you must save and restart dhcpd. + + + SAVE/RESTART + Save/Restart + + + DHCPD_SETTING_ERRORS + DHCPd Settings ERRORS + + + DHCP_START_GREATER_DHCP_END_ERRORS + Incorrect range of IPs, the DHCP Start is greater than the DHCP End , Update unsuccessfull]]> + + + CLICK_HERE_TO_MAIN_PANEL + Click Here to return to the main panel]]> + + + DHCP_RANGE_MUST_NOT_INCLUDE_SERVER_IP + Incorrect range of IPs, the range of IP address allocation must not include the server address, Update unsuccessfull]]> + + + DHCP_RANGE_WITH_BAD_IP + Incorrect IP in the DHCP range, Update unsuccessfull]]> + + + WINSSERVER_BAD_IP + Incorrect IP for WINS Server, Update unsuccessfull]]> + + + DNS_SERVER_WITH_BAD_IP + Incorrect IP for DNS servers, Update unsuccessfull]]> + + + GATEWAY_BAD_IP + Incorrect IP for Gateway, Update unsuccessfull]]> + + + SUCCESSFULLY_SAVED_SETTINGS + Successfully saved settings]]> + + + REMOVE_A_DHCP_LEASE_TITLE + Removing a DHCP Lease + + + REMOVE_A_DHCP_LEASE + Remove an entry in dhcpd.leases + + + ARE_YOU_SURE + are you sure ? + + + REMOVE_A_DHCP_LEASE_ACTION + You are about to remove a client from the dhcpd.leases file. + + + SUCCESSFULLY_DELETED_THE_CLIENT + Successfully deleted in dhcpd.leases the client : ]]> + + + WAKING_A_REMOTE_COMPUTER_TITLE + Waking Up a remote computer + + + WAKING_A_REMOTE_COMPUTER + You are about to wake up a remote computer. + + + WAKING_A_REMOTE_COMPUTER_ACTION + Are you sure you want to wake on lan the client : + + + + WAKE_UP + Wake UP + + + REMOVE + 削除 + + + SUCCESSFULLY_CLIENT_WOL_REQUEST + Successfully request to wake up the client. The computer may take time to wake up.]]> + + + ALL_OF_THEM + All of them + + + SENDING_A_WINPOPUP + Sending a WinPopup + + + SENDING_A_WINPOPUP_TO + You are about to send a WinPopup to + + + YOUR_MESSAGE + メッセージ + + + WRITE_YOUR_MESSAGE + Write your message here + + + DO_YOU_WANT_TO_SENT + Do you want to send this message to + + + SEND_WINPOPUP_TO + Send a WinPopup to + + + SUCCESSFULLY_SENT_MESSAGE + Successfully sent message popup to]]> + + + WARNING_NO_WINPOPUP_GARANTY + Warning, there is no garanty that the popup will appear on the remote computer.]]> + + + MANAGING_DHCP_CLIENT + Managing DHCP clients + + + STATUS_REPORT + Operation status report : + + + REFRESH_CONNECTED_IP_LIST + You may want to refresh this list ? + + + REFRESH + Refresh the list + + + CLEAN_ALL_DHCPLEASES + You may want to clean the dhcp.leases + + + REMOVE_ALL_LEASES + Remove all leases + + + NETWORK_NAME + Network Name + + + STATUS_CLICK_FOR_WOL + Status - click for WOL + + + START_DATE + Start Date + + + END_DATE + End Date + + + MAC_ADDRESS + MAC Address + + + NOT_CHECKED + Not Checked...]]> + + + ACTIVE_DEVICE + Active Device]]> + + + WAKE_UP_ACTION + Wake-Up...]]> + + + REMOVE_ACTION + Remove... + + + WINPOPUP_ACTION + WinPopup... + + + NO_CONNECTED_COMPUTERS + There are no connected computers + + + REMOVE_DHCP_LEASE_TITLE + Removing all DHCP Lease + + + REMOVE_DHCP_LEASE_WARNING + Remove all entries in dhcpd.leases may cause issues]]> + + + REMOVE_DHCP_LEASE_WARNING2 + The lease file is a log-structured file - whenever a lease changes, the contents of that lease are written to the end of the file. This means that it is entirely possible for there to be two or more declarations of the same lease in the lease file at the same time. In that case, the instance of that particular lease that appears last in the file is the one that is in effect. + + + SUCCESSFULLY_REMOVED_ALL_LEASES + Successfully deleted all leases.]]> + + + REMOVE_ALL_LEASES_ACTION + Remove all dhcp leases + + + SCANNING_NETWORK_TITLE + Scanning your network, the time needed depends of your subnet mask + + + NETWORK_VALUES_FOUND + Please wait .... Your subnet and your netmask appear to be : + + + ERROR_WHILE_REMOVING_ALL_LEASES + Error while removing all dhcp Leases]]> + + + ERROR_WHILE_SAVING_SETTINGS + Error while saving settings]]> + + --- smeserver-dhcpmanager-2.0.2/root/etc/e-smith/locale/nb/etc/e-smith/web/functions/dhcpd 1970-01-01 01:00:00.000000000 +0100 +++ smeserver-dhcpmanager-2.0.2.update/root/etc/e-smith/locale/nb/etc/e-smith/web/functions/dhcpd 2015-08-17 02:31:47.158748154 +0200 @@ -0,0 +1,331 @@ + + + DHCP manager + DHCP Manager + + + DHCPD_TITLE + DHCP Manager + + + DHCPD_SETTINGS_TITLE + Settings of the DHCP server + + + CONNECTED_IP + Show DHCP Clients + + + SCAN_YOUR_NETWORK + Scan your network + + + GLOBAL_WINPOPUP + Send Global Netsend WinPopup + + + CHECK_CLIENT_STATUS + Always check the status of computers (Disabled is much faster) + + + SHOW_CONNECTED_IP_TITLE + Show all devices connected to the dhcp server : + + + SCAN_YOUR_NETWORK_TITLE + Scan your network to show active devices : + + + GLOBAL_WINPOPUP_TITLE + Send a global WinPopup with the Net send protocol + + + STATUS_DHCP_SERVER + State of DHCPD + + + DHCP_START + DHCP Start + + + DHCP_END + DHCP End + + + CUSTOM_WINSERVER_TITLE + Enable a WINS Server. + + + CUSTOM_WINSERVER_STATUS + WINS Server + + + CUSTOM_WINSERVER_ADDRESS + WINS Server address + + + CUSTOM_DNS_TITLE + Enable custom DNS servers. + + + CUSTOM_DNS_STATUS + Custom DNS + + + PRIMARY_DNS_ADDRESS + Primary DNS + + + SECONDARY_DNS_ADDRESS + Secondary DNS + + + CUSTOM_GATEWAY_TITLE + Enable a custom gateway address. + + + CUSTOM_GATEWAY_STATUS + Custom gateway + + + CUSTOM_GATEWAY_ADDRESS + Gateway address + + + CUSTOM_LEASETIME_TITLE + Set the lease time (default is 86400 seconds). + + + CUSTOM_LEASETIME + Custom lease time + + + SAVE_TITLE + After changing settings above, you must save and restart dhcpd. + + + SAVE/RESTART + Save/Restart + + + DHCPD_SETTING_ERRORS + DHCPd Settings ERRORS + + + DHCP_START_GREATER_DHCP_END_ERRORS + Incorrect range of IPs, the DHCP Start is greater than the DHCP End , Update unsuccessfull]]> + + + CLICK_HERE_TO_MAIN_PANEL + Click Here to return to the main panel]]> + + + DHCP_RANGE_MUST_NOT_INCLUDE_SERVER_IP + Incorrect range of IPs, the range of IP address allocation must not include the server address, Update unsuccessfull]]> + + + DHCP_RANGE_WITH_BAD_IP + Incorrect IP in the DHCP range, Update unsuccessfull]]> + + + WINSSERVER_BAD_IP + Incorrect IP for WINS Server, Update unsuccessfull]]> + + + DNS_SERVER_WITH_BAD_IP + Incorrect IP for DNS servers, Update unsuccessfull]]> + + + GATEWAY_BAD_IP + Incorrect IP for Gateway, Update unsuccessfull]]> + + + SUCCESSFULLY_SAVED_SETTINGS + Successfully saved settings]]> + + + REMOVE_A_DHCP_LEASE_TITLE + Removing a DHCP Lease + + + REMOVE_A_DHCP_LEASE + Remove an entry in dhcpd.leases + + + ARE_YOU_SURE + are you sure ? + + + REMOVE_A_DHCP_LEASE_ACTION + You are about to remove a client from the dhcpd.leases file. + + + SUCCESSFULLY_DELETED_THE_CLIENT + Successfully deleted in dhcpd.leases the client : ]]> + + + WAKING_A_REMOTE_COMPUTER_TITLE + Waking Up a remote computer + + + WAKING_A_REMOTE_COMPUTER + You are about to wake up a remote computer. + + + WAKING_A_REMOTE_COMPUTER_ACTION + Are you sure you want to wake on lan the client : + + + + WAKE_UP + Wake UP + + + REMOVE + Fjern + + + SUCCESSFULLY_CLIENT_WOL_REQUEST + Successfully request to wake up the client. The computer may take time to wake up.]]> + + + ALL_OF_THEM + All of them + + + SENDING_A_WINPOPUP + Sending a WinPopup + + + SENDING_A_WINPOPUP_TO + You are about to send a WinPopup to + + + YOUR_MESSAGE + Melding + + + WRITE_YOUR_MESSAGE + Write your message here + + + DO_YOU_WANT_TO_SENT + Do you want to send this message to + + + SEND_WINPOPUP_TO + Send a WinPopup to + + + SUCCESSFULLY_SENT_MESSAGE + Successfully sent message popup to]]> + + + WARNING_NO_WINPOPUP_GARANTY + Warning, there is no garanty that the popup will appear on the remote computer.]]> + + + MANAGING_DHCP_CLIENT + Managing DHCP clients + + + STATUS_REPORT + Operation status report : + + + REFRESH_CONNECTED_IP_LIST + You may want to refresh this list ? + + + REFRESH + Refresh the list + + + CLEAN_ALL_DHCPLEASES + You may want to clean the dhcp.leases + + + REMOVE_ALL_LEASES + Remove all leases + + + NETWORK_NAME + Network Name + + + STATUS_CLICK_FOR_WOL + Status - click for WOL + + + START_DATE + Start Date + + + END_DATE + End Date + + + MAC_ADDRESS + MAC Address + + + NOT_CHECKED + Not Checked...]]> + + + ACTIVE_DEVICE + Active Device]]> + + + WAKE_UP_ACTION + Wake-Up...]]> + + + REMOVE_ACTION + Remove... + + + WINPOPUP_ACTION + WinPopup... + + + NO_CONNECTED_COMPUTERS + There are no connected computers + + + REMOVE_DHCP_LEASE_TITLE + Removing all DHCP Lease + + + REMOVE_DHCP_LEASE_WARNING + Remove all entries in dhcpd.leases may cause issues]]> + + + REMOVE_DHCP_LEASE_WARNING2 + The lease file is a log-structured file - whenever a lease changes, the contents of that lease are written to the end of the file. This means that it is entirely possible for there to be two or more declarations of the same lease in the lease file at the same time. In that case, the instance of that particular lease that appears last in the file is the one that is in effect. + + + SUCCESSFULLY_REMOVED_ALL_LEASES + Successfully deleted all leases.]]> + + + REMOVE_ALL_LEASES_ACTION + Remove all dhcp leases + + + SCANNING_NETWORK_TITLE + Scanning your network, the time needed depends of your subnet mask + + + NETWORK_VALUES_FOUND + Please wait .... Your subnet and your netmask appear to be : + + + ERROR_WHILE_REMOVING_ALL_LEASES + Error while removing all dhcp Leases]]> + + + ERROR_WHILE_SAVING_SETTINGS + Error while saving settings]]> + + --- smeserver-dhcpmanager-2.0.2/root/etc/e-smith/locale/nl/etc/e-smith/web/functions/dhcpd 1970-01-01 01:00:00.000000000 +0100 +++ smeserver-dhcpmanager-2.0.2.update/root/etc/e-smith/locale/nl/etc/e-smith/web/functions/dhcpd 2015-08-17 02:31:47.321748144 +0200 @@ -0,0 +1,331 @@ + + + DHCP manager + DHCP Manager + + + DHCPD_TITLE + DHCP Manager + + + DHCPD_SETTINGS_TITLE + Settings of the DHCP server + + + CONNECTED_IP + Show DHCP Clients + + + SCAN_YOUR_NETWORK + Scan your network + + + GLOBAL_WINPOPUP + Send Global Netsend WinPopup + + + CHECK_CLIENT_STATUS + Always check the status of computers (Disabled is much faster) + + + SHOW_CONNECTED_IP_TITLE + Show all devices connected to the dhcp server : + + + SCAN_YOUR_NETWORK_TITLE + Scan your network to show active devices : + + + GLOBAL_WINPOPUP_TITLE + Send a global WinPopup with the Net send protocol + + + STATUS_DHCP_SERVER + State of DHCPD + + + DHCP_START + DHCP Start + + + DHCP_END + DHCP End + + + CUSTOM_WINSERVER_TITLE + Enable a WINS Server. + + + CUSTOM_WINSERVER_STATUS + WINS Server + + + CUSTOM_WINSERVER_ADDRESS + WINS Server address + + + CUSTOM_DNS_TITLE + Enable custom DNS servers. + + + CUSTOM_DNS_STATUS + Custom DNS + + + PRIMARY_DNS_ADDRESS + Primary DNS + + + SECONDARY_DNS_ADDRESS + Secondary DNS + + + CUSTOM_GATEWAY_TITLE + Enable a custom gateway address. + + + CUSTOM_GATEWAY_STATUS + Custom gateway + + + CUSTOM_GATEWAY_ADDRESS + Gateway address + + + CUSTOM_LEASETIME_TITLE + Set the lease time (default is 86400 seconds). + + + CUSTOM_LEASETIME + Custom lease time + + + SAVE_TITLE + After changing settings above, you must save and restart dhcpd. + + + SAVE/RESTART + Save/Restart + + + DHCPD_SETTING_ERRORS + DHCPd Settings ERRORS + + + DHCP_START_GREATER_DHCP_END_ERRORS + Incorrect range of IPs, the DHCP Start is greater than the DHCP End , Update unsuccessfull]]> + + + CLICK_HERE_TO_MAIN_PANEL + Click Here to return to the main panel]]> + + + DHCP_RANGE_MUST_NOT_INCLUDE_SERVER_IP + Incorrect range of IPs, the range of IP address allocation must not include the server address, Update unsuccessfull]]> + + + DHCP_RANGE_WITH_BAD_IP + Incorrect IP in the DHCP range, Update unsuccessfull]]> + + + WINSSERVER_BAD_IP + Incorrect IP for WINS Server, Update unsuccessfull]]> + + + DNS_SERVER_WITH_BAD_IP + Incorrect IP for DNS servers, Update unsuccessfull]]> + + + GATEWAY_BAD_IP + Incorrect IP for Gateway, Update unsuccessfull]]> + + + SUCCESSFULLY_SAVED_SETTINGS + Successfully saved settings]]> + + + REMOVE_A_DHCP_LEASE_TITLE + Removing a DHCP Lease + + + REMOVE_A_DHCP_LEASE + Remove an entry in dhcpd.leases + + + ARE_YOU_SURE + are you sure ? + + + REMOVE_A_DHCP_LEASE_ACTION + You are about to remove a client from the dhcpd.leases file. + + + SUCCESSFULLY_DELETED_THE_CLIENT + Successfully deleted in dhcpd.leases the client : ]]> + + + WAKING_A_REMOTE_COMPUTER_TITLE + Waking Up a remote computer + + + WAKING_A_REMOTE_COMPUTER + You are about to wake up a remote computer. + + + WAKING_A_REMOTE_COMPUTER_ACTION + Are you sure you want to wake on lan the client : + + + + WAKE_UP + Wake UP + + + REMOVE + Verwijderen + + + SUCCESSFULLY_CLIENT_WOL_REQUEST + Successfully request to wake up the client. The computer may take time to wake up.]]> + + + ALL_OF_THEM + All of them + + + SENDING_A_WINPOPUP + Sending a WinPopup + + + SENDING_A_WINPOPUP_TO + You are about to send a WinPopup to + + + YOUR_MESSAGE + Uw bericht + + + WRITE_YOUR_MESSAGE + Write your message here + + + DO_YOU_WANT_TO_SENT + Do you want to send this message to + + + SEND_WINPOPUP_TO + Send a WinPopup to + + + SUCCESSFULLY_SENT_MESSAGE + Successfully sent message popup to]]> + + + WARNING_NO_WINPOPUP_GARANTY + Warning, there is no garanty that the popup will appear on the remote computer.]]> + + + MANAGING_DHCP_CLIENT + Managing DHCP clients + + + STATUS_REPORT + Operation status report : + + + REFRESH_CONNECTED_IP_LIST + You may want to refresh this list ? + + + REFRESH + Refresh the list + + + CLEAN_ALL_DHCPLEASES + You may want to clean the dhcp.leases + + + REMOVE_ALL_LEASES + Remove all leases + + + NETWORK_NAME + Network Name + + + STATUS_CLICK_FOR_WOL + Status - click for WOL + + + START_DATE + Start Date + + + END_DATE + End Date + + + MAC_ADDRESS + MAC Address + + + NOT_CHECKED + Not Checked...]]> + + + ACTIVE_DEVICE + Active Device]]> + + + WAKE_UP_ACTION + Wake-Up...]]> + + + REMOVE_ACTION + Remove... + + + WINPOPUP_ACTION + WinPopup... + + + NO_CONNECTED_COMPUTERS + There are no connected computers + + + REMOVE_DHCP_LEASE_TITLE + Removing all DHCP Lease + + + REMOVE_DHCP_LEASE_WARNING + Remove all entries in dhcpd.leases may cause issues]]> + + + REMOVE_DHCP_LEASE_WARNING2 + The lease file is a log-structured file - whenever a lease changes, the contents of that lease are written to the end of the file. This means that it is entirely possible for there to be two or more declarations of the same lease in the lease file at the same time. In that case, the instance of that particular lease that appears last in the file is the one that is in effect. + + + SUCCESSFULLY_REMOVED_ALL_LEASES + Successfully deleted all leases.]]> + + + REMOVE_ALL_LEASES_ACTION + Remove all dhcp leases + + + SCANNING_NETWORK_TITLE + Scanning your network, the time needed depends of your subnet mask + + + NETWORK_VALUES_FOUND + Please wait .... Your subnet and your netmask appear to be : + + + ERROR_WHILE_REMOVING_ALL_LEASES + Error while removing all dhcp Leases]]> + + + ERROR_WHILE_SAVING_SETTINGS + Error while saving settings]]> + + --- smeserver-dhcpmanager-2.0.2/root/etc/e-smith/locale/pl/etc/e-smith/web/functions/dhcpd 1970-01-01 01:00:00.000000000 +0100 +++ smeserver-dhcpmanager-2.0.2.update/root/etc/e-smith/locale/pl/etc/e-smith/web/functions/dhcpd 2015-08-17 02:31:47.496748132 +0200 @@ -0,0 +1,331 @@ + + + DHCP manager + DHCP Manager + + + DHCPD_TITLE + DHCP Manager + + + DHCPD_SETTINGS_TITLE + Settings of the DHCP server + + + CONNECTED_IP + Show DHCP Clients + + + SCAN_YOUR_NETWORK + Scan your network + + + GLOBAL_WINPOPUP + Send Global Netsend WinPopup + + + CHECK_CLIENT_STATUS + Always check the status of computers (Disabled is much faster) + + + SHOW_CONNECTED_IP_TITLE + Show all devices connected to the dhcp server : + + + SCAN_YOUR_NETWORK_TITLE + Scan your network to show active devices : + + + GLOBAL_WINPOPUP_TITLE + Send a global WinPopup with the Net send protocol + + + STATUS_DHCP_SERVER + State of DHCPD + + + DHCP_START + DHCP Start + + + DHCP_END + DHCP End + + + CUSTOM_WINSERVER_TITLE + Enable a WINS Server. + + + CUSTOM_WINSERVER_STATUS + WINS Server + + + CUSTOM_WINSERVER_ADDRESS + WINS Server address + + + CUSTOM_DNS_TITLE + Enable custom DNS servers. + + + CUSTOM_DNS_STATUS + Custom DNS + + + PRIMARY_DNS_ADDRESS + Primary DNS + + + SECONDARY_DNS_ADDRESS + Secondary DNS + + + CUSTOM_GATEWAY_TITLE + Enable a custom gateway address. + + + CUSTOM_GATEWAY_STATUS + Custom gateway + + + CUSTOM_GATEWAY_ADDRESS + Gateway address + + + CUSTOM_LEASETIME_TITLE + Set the lease time (default is 86400 seconds). + + + CUSTOM_LEASETIME + Custom lease time + + + SAVE_TITLE + After changing settings above, you must save and restart dhcpd. + + + SAVE/RESTART + Save/Restart + + + DHCPD_SETTING_ERRORS + DHCPd Settings ERRORS + + + DHCP_START_GREATER_DHCP_END_ERRORS + Incorrect range of IPs, the DHCP Start is greater than the DHCP End , Update unsuccessfull]]> + + + CLICK_HERE_TO_MAIN_PANEL + Click Here to return to the main panel]]> + + + DHCP_RANGE_MUST_NOT_INCLUDE_SERVER_IP + Incorrect range of IPs, the range of IP address allocation must not include the server address, Update unsuccessfull]]> + + + DHCP_RANGE_WITH_BAD_IP + Incorrect IP in the DHCP range, Update unsuccessfull]]> + + + WINSSERVER_BAD_IP + Incorrect IP for WINS Server, Update unsuccessfull]]> + + + DNS_SERVER_WITH_BAD_IP + Incorrect IP for DNS servers, Update unsuccessfull]]> + + + GATEWAY_BAD_IP + Incorrect IP for Gateway, Update unsuccessfull]]> + + + SUCCESSFULLY_SAVED_SETTINGS + Successfully saved settings]]> + + + REMOVE_A_DHCP_LEASE_TITLE + Removing a DHCP Lease + + + REMOVE_A_DHCP_LEASE + Remove an entry in dhcpd.leases + + + ARE_YOU_SURE + are you sure ? + + + REMOVE_A_DHCP_LEASE_ACTION + You are about to remove a client from the dhcpd.leases file. + + + SUCCESSFULLY_DELETED_THE_CLIENT + Successfully deleted in dhcpd.leases the client : ]]> + + + WAKING_A_REMOTE_COMPUTER_TITLE + Waking Up a remote computer + + + WAKING_A_REMOTE_COMPUTER + You are about to wake up a remote computer. + + + WAKING_A_REMOTE_COMPUTER_ACTION + Are you sure you want to wake on lan the client : + + + + WAKE_UP + Wake UP + + + REMOVE + Usuń + + + SUCCESSFULLY_CLIENT_WOL_REQUEST + Successfully request to wake up the client. The computer may take time to wake up.]]> + + + ALL_OF_THEM + All of them + + + SENDING_A_WINPOPUP + Sending a WinPopup + + + SENDING_A_WINPOPUP_TO + You are about to send a WinPopup to + + + YOUR_MESSAGE + Wiadomość + + + WRITE_YOUR_MESSAGE + Write your message here + + + DO_YOU_WANT_TO_SENT + Do you want to send this message to + + + SEND_WINPOPUP_TO + Send a WinPopup to + + + SUCCESSFULLY_SENT_MESSAGE + Successfully sent message popup to]]> + + + WARNING_NO_WINPOPUP_GARANTY + Warning, there is no garanty that the popup will appear on the remote computer.]]> + + + MANAGING_DHCP_CLIENT + Managing DHCP clients + + + STATUS_REPORT + Operation status report : + + + REFRESH_CONNECTED_IP_LIST + You may want to refresh this list ? + + + REFRESH + Refresh the list + + + CLEAN_ALL_DHCPLEASES + You may want to clean the dhcp.leases + + + REMOVE_ALL_LEASES + Remove all leases + + + NETWORK_NAME + Network Name + + + STATUS_CLICK_FOR_WOL + Status - click for WOL + + + START_DATE + Start Date + + + END_DATE + End Date + + + MAC_ADDRESS + MAC Address + + + NOT_CHECKED + Not Checked...]]> + + + ACTIVE_DEVICE + Active Device]]> + + + WAKE_UP_ACTION + Wake-Up...]]> + + + REMOVE_ACTION + Remove... + + + WINPOPUP_ACTION + WinPopup... + + + NO_CONNECTED_COMPUTERS + There are no connected computers + + + REMOVE_DHCP_LEASE_TITLE + Removing all DHCP Lease + + + REMOVE_DHCP_LEASE_WARNING + Remove all entries in dhcpd.leases may cause issues]]> + + + REMOVE_DHCP_LEASE_WARNING2 + The lease file is a log-structured file - whenever a lease changes, the contents of that lease are written to the end of the file. This means that it is entirely possible for there to be two or more declarations of the same lease in the lease file at the same time. In that case, the instance of that particular lease that appears last in the file is the one that is in effect. + + + SUCCESSFULLY_REMOVED_ALL_LEASES + Successfully deleted all leases.]]> + + + REMOVE_ALL_LEASES_ACTION + Remove all dhcp leases + + + SCANNING_NETWORK_TITLE + Scanning your network, the time needed depends of your subnet mask + + + NETWORK_VALUES_FOUND + Please wait .... Your subnet and your netmask appear to be : + + + ERROR_WHILE_REMOVING_ALL_LEASES + Error while removing all dhcp Leases]]> + + + ERROR_WHILE_SAVING_SETTINGS + Error while saving settings]]> + + --- smeserver-dhcpmanager-2.0.2/root/etc/e-smith/locale/pt/etc/e-smith/web/functions/dhcpd 1970-01-01 01:00:00.000000000 +0100 +++ smeserver-dhcpmanager-2.0.2.update/root/etc/e-smith/locale/pt/etc/e-smith/web/functions/dhcpd 2015-08-17 02:31:47.656748124 +0200 @@ -0,0 +1,331 @@ + + + DHCP manager + DHCP Manager + + + DHCPD_TITLE + DHCP Manager + + + DHCPD_SETTINGS_TITLE + Settings of the DHCP server + + + CONNECTED_IP + Show DHCP Clients + + + SCAN_YOUR_NETWORK + Scan your network + + + GLOBAL_WINPOPUP + Send Global Netsend WinPopup + + + CHECK_CLIENT_STATUS + Always check the status of computers (Disabled is much faster) + + + SHOW_CONNECTED_IP_TITLE + Show all devices connected to the dhcp server : + + + SCAN_YOUR_NETWORK_TITLE + Scan your network to show active devices : + + + GLOBAL_WINPOPUP_TITLE + Send a global WinPopup with the Net send protocol + + + STATUS_DHCP_SERVER + State of DHCPD + + + DHCP_START + DHCP Start + + + DHCP_END + DHCP End + + + CUSTOM_WINSERVER_TITLE + Enable a WINS Server. + + + CUSTOM_WINSERVER_STATUS + WINS Server + + + CUSTOM_WINSERVER_ADDRESS + WINS Server address + + + CUSTOM_DNS_TITLE + Enable custom DNS servers. + + + CUSTOM_DNS_STATUS + Custom DNS + + + PRIMARY_DNS_ADDRESS + Primary DNS + + + SECONDARY_DNS_ADDRESS + Secondary DNS + + + CUSTOM_GATEWAY_TITLE + Enable a custom gateway address. + + + CUSTOM_GATEWAY_STATUS + Custom gateway + + + CUSTOM_GATEWAY_ADDRESS + Gateway address + + + CUSTOM_LEASETIME_TITLE + Set the lease time (default is 86400 seconds). + + + CUSTOM_LEASETIME + Custom lease time + + + SAVE_TITLE + After changing settings above, you must save and restart dhcpd. + + + SAVE/RESTART + Save/Restart + + + DHCPD_SETTING_ERRORS + DHCPd Settings ERRORS + + + DHCP_START_GREATER_DHCP_END_ERRORS + Incorrect range of IPs, the DHCP Start is greater than the DHCP End , Update unsuccessfull]]> + + + CLICK_HERE_TO_MAIN_PANEL + Click Here to return to the main panel]]> + + + DHCP_RANGE_MUST_NOT_INCLUDE_SERVER_IP + Incorrect range of IPs, the range of IP address allocation must not include the server address, Update unsuccessfull]]> + + + DHCP_RANGE_WITH_BAD_IP + Incorrect IP in the DHCP range, Update unsuccessfull]]> + + + WINSSERVER_BAD_IP + Incorrect IP for WINS Server, Update unsuccessfull]]> + + + DNS_SERVER_WITH_BAD_IP + Incorrect IP for DNS servers, Update unsuccessfull]]> + + + GATEWAY_BAD_IP + Incorrect IP for Gateway, Update unsuccessfull]]> + + + SUCCESSFULLY_SAVED_SETTINGS + Successfully saved settings]]> + + + REMOVE_A_DHCP_LEASE_TITLE + Removing a DHCP Lease + + + REMOVE_A_DHCP_LEASE + Remove an entry in dhcpd.leases + + + ARE_YOU_SURE + are you sure ? + + + REMOVE_A_DHCP_LEASE_ACTION + You are about to remove a client from the dhcpd.leases file. + + + SUCCESSFULLY_DELETED_THE_CLIENT + Successfully deleted in dhcpd.leases the client : ]]> + + + WAKING_A_REMOTE_COMPUTER_TITLE + Waking Up a remote computer + + + WAKING_A_REMOTE_COMPUTER + You are about to wake up a remote computer. + + + WAKING_A_REMOTE_COMPUTER_ACTION + Are you sure you want to wake on lan the client : + + + + WAKE_UP + Wake UP + + + REMOVE + Remover + + + SUCCESSFULLY_CLIENT_WOL_REQUEST + Successfully request to wake up the client. The computer may take time to wake up.]]> + + + ALL_OF_THEM + All of them + + + SENDING_A_WINPOPUP + Sending a WinPopup + + + SENDING_A_WINPOPUP_TO + You are about to send a WinPopup to + + + YOUR_MESSAGE + Mensagem + + + WRITE_YOUR_MESSAGE + Write your message here + + + DO_YOU_WANT_TO_SENT + Do you want to send this message to + + + SEND_WINPOPUP_TO + Send a WinPopup to + + + SUCCESSFULLY_SENT_MESSAGE + Successfully sent message popup to]]> + + + WARNING_NO_WINPOPUP_GARANTY + Warning, there is no garanty that the popup will appear on the remote computer.]]> + + + MANAGING_DHCP_CLIENT + Managing DHCP clients + + + STATUS_REPORT + Operation status report : + + + REFRESH_CONNECTED_IP_LIST + You may want to refresh this list ? + + + REFRESH + Refresh the list + + + CLEAN_ALL_DHCPLEASES + You may want to clean the dhcp.leases + + + REMOVE_ALL_LEASES + Remove all leases + + + NETWORK_NAME + Network Name + + + STATUS_CLICK_FOR_WOL + Status - click for WOL + + + START_DATE + Start Date + + + END_DATE + End Date + + + MAC_ADDRESS + MAC Address + + + NOT_CHECKED + Not Checked...]]> + + + ACTIVE_DEVICE + Active Device]]> + + + WAKE_UP_ACTION + Wake-Up...]]> + + + REMOVE_ACTION + Remove... + + + WINPOPUP_ACTION + WinPopup... + + + NO_CONNECTED_COMPUTERS + There are no connected computers + + + REMOVE_DHCP_LEASE_TITLE + Removing all DHCP Lease + + + REMOVE_DHCP_LEASE_WARNING + Remove all entries in dhcpd.leases may cause issues]]> + + + REMOVE_DHCP_LEASE_WARNING2 + The lease file is a log-structured file - whenever a lease changes, the contents of that lease are written to the end of the file. This means that it is entirely possible for there to be two or more declarations of the same lease in the lease file at the same time. In that case, the instance of that particular lease that appears last in the file is the one that is in effect. + + + SUCCESSFULLY_REMOVED_ALL_LEASES + Successfully deleted all leases.]]> + + + REMOVE_ALL_LEASES_ACTION + Remove all dhcp leases + + + SCANNING_NETWORK_TITLE + Scanning your network, the time needed depends of your subnet mask + + + NETWORK_VALUES_FOUND + Please wait .... Your subnet and your netmask appear to be : + + + ERROR_WHILE_REMOVING_ALL_LEASES + Error while removing all dhcp Leases]]> + + + ERROR_WHILE_SAVING_SETTINGS + Error while saving settings]]> + + --- smeserver-dhcpmanager-2.0.2/root/etc/e-smith/locale/pt-br/etc/e-smith/web/functions/dhcpd 1970-01-01 01:00:00.000000000 +0100 +++ smeserver-dhcpmanager-2.0.2.update/root/etc/e-smith/locale/pt-br/etc/e-smith/web/functions/dhcpd 2015-08-17 02:31:47.810748114 +0200 @@ -0,0 +1,331 @@ + + + DHCP manager + DHCP Manager + + + DHCPD_TITLE + DHCP Manager + + + DHCPD_SETTINGS_TITLE + Settings of the DHCP server + + + CONNECTED_IP + Show DHCP Clients + + + SCAN_YOUR_NETWORK + Scan your network + + + GLOBAL_WINPOPUP + Send Global Netsend WinPopup + + + CHECK_CLIENT_STATUS + Always check the status of computers (Disabled is much faster) + + + SHOW_CONNECTED_IP_TITLE + Show all devices connected to the dhcp server : + + + SCAN_YOUR_NETWORK_TITLE + Scan your network to show active devices : + + + GLOBAL_WINPOPUP_TITLE + Send a global WinPopup with the Net send protocol + + + STATUS_DHCP_SERVER + State of DHCPD + + + DHCP_START + DHCP Start + + + DHCP_END + DHCP End + + + CUSTOM_WINSERVER_TITLE + Enable a WINS Server. + + + CUSTOM_WINSERVER_STATUS + WINS Server + + + CUSTOM_WINSERVER_ADDRESS + WINS Server address + + + CUSTOM_DNS_TITLE + Enable custom DNS servers. + + + CUSTOM_DNS_STATUS + Custom DNS + + + PRIMARY_DNS_ADDRESS + Primary DNS + + + SECONDARY_DNS_ADDRESS + Secondary DNS + + + CUSTOM_GATEWAY_TITLE + Enable a custom gateway address. + + + CUSTOM_GATEWAY_STATUS + Custom gateway + + + CUSTOM_GATEWAY_ADDRESS + Gateway address + + + CUSTOM_LEASETIME_TITLE + Set the lease time (default is 86400 seconds). + + + CUSTOM_LEASETIME + Custom lease time + + + SAVE_TITLE + After changing settings above, you must save and restart dhcpd. + + + SAVE/RESTART + Save/Restart + + + DHCPD_SETTING_ERRORS + DHCPd Settings ERRORS + + + DHCP_START_GREATER_DHCP_END_ERRORS + Incorrect range of IPs, the DHCP Start is greater than the DHCP End , Update unsuccessfull]]> + + + CLICK_HERE_TO_MAIN_PANEL + Click Here to return to the main panel]]> + + + DHCP_RANGE_MUST_NOT_INCLUDE_SERVER_IP + Incorrect range of IPs, the range of IP address allocation must not include the server address, Update unsuccessfull]]> + + + DHCP_RANGE_WITH_BAD_IP + Incorrect IP in the DHCP range, Update unsuccessfull]]> + + + WINSSERVER_BAD_IP + Incorrect IP for WINS Server, Update unsuccessfull]]> + + + DNS_SERVER_WITH_BAD_IP + Incorrect IP for DNS servers, Update unsuccessfull]]> + + + GATEWAY_BAD_IP + Incorrect IP for Gateway, Update unsuccessfull]]> + + + SUCCESSFULLY_SAVED_SETTINGS + Successfully saved settings]]> + + + REMOVE_A_DHCP_LEASE_TITLE + Removing a DHCP Lease + + + REMOVE_A_DHCP_LEASE + Remove an entry in dhcpd.leases + + + ARE_YOU_SURE + are you sure ? + + + REMOVE_A_DHCP_LEASE_ACTION + You are about to remove a client from the dhcpd.leases file. + + + SUCCESSFULLY_DELETED_THE_CLIENT + Successfully deleted in dhcpd.leases the client : ]]> + + + WAKING_A_REMOTE_COMPUTER_TITLE + Waking Up a remote computer + + + WAKING_A_REMOTE_COMPUTER + You are about to wake up a remote computer. + + + WAKING_A_REMOTE_COMPUTER_ACTION + Are you sure you want to wake on lan the client : + + + + WAKE_UP + Wake UP + + + REMOVE + Remover + + + SUCCESSFULLY_CLIENT_WOL_REQUEST + Successfully request to wake up the client. The computer may take time to wake up.]]> + + + ALL_OF_THEM + All of them + + + SENDING_A_WINPOPUP + Sending a WinPopup + + + SENDING_A_WINPOPUP_TO + You are about to send a WinPopup to + + + YOUR_MESSAGE + Sua mensagem + + + WRITE_YOUR_MESSAGE + Write your message here + + + DO_YOU_WANT_TO_SENT + Do you want to send this message to + + + SEND_WINPOPUP_TO + Send a WinPopup to + + + SUCCESSFULLY_SENT_MESSAGE + Successfully sent message popup to]]> + + + WARNING_NO_WINPOPUP_GARANTY + Warning, there is no garanty that the popup will appear on the remote computer.]]> + + + MANAGING_DHCP_CLIENT + Managing DHCP clients + + + STATUS_REPORT + Operation status report : + + + REFRESH_CONNECTED_IP_LIST + You may want to refresh this list ? + + + REFRESH + Refresh the list + + + CLEAN_ALL_DHCPLEASES + You may want to clean the dhcp.leases + + + REMOVE_ALL_LEASES + Remove all leases + + + NETWORK_NAME + Network Name + + + STATUS_CLICK_FOR_WOL + Status - click for WOL + + + START_DATE + Start Date + + + END_DATE + End Date + + + MAC_ADDRESS + MAC Address + + + NOT_CHECKED + Not Checked...]]> + + + ACTIVE_DEVICE + Active Device]]> + + + WAKE_UP_ACTION + Wake-Up...]]> + + + REMOVE_ACTION + Remove... + + + WINPOPUP_ACTION + WinPopup... + + + NO_CONNECTED_COMPUTERS + There are no connected computers + + + REMOVE_DHCP_LEASE_TITLE + Removing all DHCP Lease + + + REMOVE_DHCP_LEASE_WARNING + Remove all entries in dhcpd.leases may cause issues]]> + + + REMOVE_DHCP_LEASE_WARNING2 + The lease file is a log-structured file - whenever a lease changes, the contents of that lease are written to the end of the file. This means that it is entirely possible for there to be two or more declarations of the same lease in the lease file at the same time. In that case, the instance of that particular lease that appears last in the file is the one that is in effect. + + + SUCCESSFULLY_REMOVED_ALL_LEASES + Successfully deleted all leases.]]> + + + REMOVE_ALL_LEASES_ACTION + Remove all dhcp leases + + + SCANNING_NETWORK_TITLE + Scanning your network, the time needed depends of your subnet mask + + + NETWORK_VALUES_FOUND + Please wait .... Your subnet and your netmask appear to be : + + + ERROR_WHILE_REMOVING_ALL_LEASES + Error while removing all dhcp Leases]]> + + + ERROR_WHILE_SAVING_SETTINGS + Error while saving settings]]> + + --- smeserver-dhcpmanager-2.0.2/root/etc/e-smith/locale/ro/etc/e-smith/web/functions/dhcpd 1970-01-01 01:00:00.000000000 +0100 +++ smeserver-dhcpmanager-2.0.2.update/root/etc/e-smith/locale/ro/etc/e-smith/web/functions/dhcpd 2015-08-17 02:31:47.980748107 +0200 @@ -0,0 +1,331 @@ + + + DHCP manager + DHCP Manager + + + DHCPD_TITLE + DHCP Manager + + + DHCPD_SETTINGS_TITLE + Settings of the DHCP server + + + CONNECTED_IP + Show DHCP Clients + + + SCAN_YOUR_NETWORK + Scan your network + + + GLOBAL_WINPOPUP + Send Global Netsend WinPopup + + + CHECK_CLIENT_STATUS + Always check the status of computers (Disabled is much faster) + + + SHOW_CONNECTED_IP_TITLE + Show all devices connected to the dhcp server : + + + SCAN_YOUR_NETWORK_TITLE + Scan your network to show active devices : + + + GLOBAL_WINPOPUP_TITLE + Send a global WinPopup with the Net send protocol + + + STATUS_DHCP_SERVER + State of DHCPD + + + DHCP_START + DHCP Start + + + DHCP_END + DHCP End + + + CUSTOM_WINSERVER_TITLE + Enable a WINS Server. + + + CUSTOM_WINSERVER_STATUS + WINS Server + + + CUSTOM_WINSERVER_ADDRESS + WINS Server address + + + CUSTOM_DNS_TITLE + Enable custom DNS servers. + + + CUSTOM_DNS_STATUS + Custom DNS + + + PRIMARY_DNS_ADDRESS + Primary DNS + + + SECONDARY_DNS_ADDRESS + Secondary DNS + + + CUSTOM_GATEWAY_TITLE + Enable a custom gateway address. + + + CUSTOM_GATEWAY_STATUS + Custom gateway + + + CUSTOM_GATEWAY_ADDRESS + Gateway address + + + CUSTOM_LEASETIME_TITLE + Set the lease time (default is 86400 seconds). + + + CUSTOM_LEASETIME + Custom lease time + + + SAVE_TITLE + After changing settings above, you must save and restart dhcpd. + + + SAVE/RESTART + Save/Restart + + + DHCPD_SETTING_ERRORS + DHCPd Settings ERRORS + + + DHCP_START_GREATER_DHCP_END_ERRORS + Incorrect range of IPs, the DHCP Start is greater than the DHCP End , Update unsuccessfull]]> + + + CLICK_HERE_TO_MAIN_PANEL + Click Here to return to the main panel]]> + + + DHCP_RANGE_MUST_NOT_INCLUDE_SERVER_IP + Incorrect range of IPs, the range of IP address allocation must not include the server address, Update unsuccessfull]]> + + + DHCP_RANGE_WITH_BAD_IP + Incorrect IP in the DHCP range, Update unsuccessfull]]> + + + WINSSERVER_BAD_IP + Incorrect IP for WINS Server, Update unsuccessfull]]> + + + DNS_SERVER_WITH_BAD_IP + Incorrect IP for DNS servers, Update unsuccessfull]]> + + + GATEWAY_BAD_IP + Incorrect IP for Gateway, Update unsuccessfull]]> + + + SUCCESSFULLY_SAVED_SETTINGS + Successfully saved settings]]> + + + REMOVE_A_DHCP_LEASE_TITLE + Removing a DHCP Lease + + + REMOVE_A_DHCP_LEASE + Remove an entry in dhcpd.leases + + + ARE_YOU_SURE + are you sure ? + + + REMOVE_A_DHCP_LEASE_ACTION + You are about to remove a client from the dhcpd.leases file. + + + SUCCESSFULLY_DELETED_THE_CLIENT + Successfully deleted in dhcpd.leases the client : ]]> + + + WAKING_A_REMOTE_COMPUTER_TITLE + Waking Up a remote computer + + + WAKING_A_REMOTE_COMPUTER + You are about to wake up a remote computer. + + + WAKING_A_REMOTE_COMPUTER_ACTION + Are you sure you want to wake on lan the client : + + + + WAKE_UP + Wake UP + + + REMOVE + Remove + + + SUCCESSFULLY_CLIENT_WOL_REQUEST + Successfully request to wake up the client. The computer may take time to wake up.]]> + + + ALL_OF_THEM + All of them + + + SENDING_A_WINPOPUP + Sending a WinPopup + + + SENDING_A_WINPOPUP_TO + You are about to send a WinPopup to + + + YOUR_MESSAGE + Mesajul dumneavoastră + + + WRITE_YOUR_MESSAGE + Write your message here + + + DO_YOU_WANT_TO_SENT + Do you want to send this message to + + + SEND_WINPOPUP_TO + Send a WinPopup to + + + SUCCESSFULLY_SENT_MESSAGE + Successfully sent message popup to]]> + + + WARNING_NO_WINPOPUP_GARANTY + Warning, there is no garanty that the popup will appear on the remote computer.]]> + + + MANAGING_DHCP_CLIENT + Managing DHCP clients + + + STATUS_REPORT + Operation status report : + + + REFRESH_CONNECTED_IP_LIST + You may want to refresh this list ? + + + REFRESH + Refresh the list + + + CLEAN_ALL_DHCPLEASES + You may want to clean the dhcp.leases + + + REMOVE_ALL_LEASES + Remove all leases + + + NETWORK_NAME + Network Name + + + STATUS_CLICK_FOR_WOL + Status - click for WOL + + + START_DATE + Start Date + + + END_DATE + End Date + + + MAC_ADDRESS + MAC Address + + + NOT_CHECKED + Not Checked...]]> + + + ACTIVE_DEVICE + Active Device]]> + + + WAKE_UP_ACTION + Wake-Up...]]> + + + REMOVE_ACTION + Remove... + + + WINPOPUP_ACTION + WinPopup... + + + NO_CONNECTED_COMPUTERS + There are no connected computers + + + REMOVE_DHCP_LEASE_TITLE + Removing all DHCP Lease + + + REMOVE_DHCP_LEASE_WARNING + Remove all entries in dhcpd.leases may cause issues]]> + + + REMOVE_DHCP_LEASE_WARNING2 + The lease file is a log-structured file - whenever a lease changes, the contents of that lease are written to the end of the file. This means that it is entirely possible for there to be two or more declarations of the same lease in the lease file at the same time. In that case, the instance of that particular lease that appears last in the file is the one that is in effect. + + + SUCCESSFULLY_REMOVED_ALL_LEASES + Successfully deleted all leases.]]> + + + REMOVE_ALL_LEASES_ACTION + Remove all dhcp leases + + + SCANNING_NETWORK_TITLE + Scanning your network, the time needed depends of your subnet mask + + + NETWORK_VALUES_FOUND + Please wait .... Your subnet and your netmask appear to be : + + + ERROR_WHILE_REMOVING_ALL_LEASES + Error while removing all dhcp Leases]]> + + + ERROR_WHILE_SAVING_SETTINGS + Error while saving settings]]> + + --- smeserver-dhcpmanager-2.0.2/root/etc/e-smith/locale/ru/etc/e-smith/web/functions/dhcpd 1970-01-01 01:00:00.000000000 +0100 +++ smeserver-dhcpmanager-2.0.2.update/root/etc/e-smith/locale/ru/etc/e-smith/web/functions/dhcpd 2015-08-17 02:31:48.144748095 +0200 @@ -0,0 +1,331 @@ + + + DHCP manager + DHCP Manager + + + DHCPD_TITLE + DHCP Manager + + + DHCPD_SETTINGS_TITLE + Settings of the DHCP server + + + CONNECTED_IP + Show DHCP Clients + + + SCAN_YOUR_NETWORK + Scan your network + + + GLOBAL_WINPOPUP + Send Global Netsend WinPopup + + + CHECK_CLIENT_STATUS + Always check the status of computers (Disabled is much faster) + + + SHOW_CONNECTED_IP_TITLE + Show all devices connected to the dhcp server : + + + SCAN_YOUR_NETWORK_TITLE + Scan your network to show active devices : + + + GLOBAL_WINPOPUP_TITLE + Send a global WinPopup with the Net send protocol + + + STATUS_DHCP_SERVER + State of DHCPD + + + DHCP_START + DHCP Start + + + DHCP_END + DHCP End + + + CUSTOM_WINSERVER_TITLE + Enable a WINS Server. + + + CUSTOM_WINSERVER_STATUS + WINS Server + + + CUSTOM_WINSERVER_ADDRESS + WINS Server address + + + CUSTOM_DNS_TITLE + Enable custom DNS servers. + + + CUSTOM_DNS_STATUS + Custom DNS + + + PRIMARY_DNS_ADDRESS + Primary DNS + + + SECONDARY_DNS_ADDRESS + Secondary DNS + + + CUSTOM_GATEWAY_TITLE + Enable a custom gateway address. + + + CUSTOM_GATEWAY_STATUS + Custom gateway + + + CUSTOM_GATEWAY_ADDRESS + Gateway address + + + CUSTOM_LEASETIME_TITLE + Set the lease time (default is 86400 seconds). + + + CUSTOM_LEASETIME + Custom lease time + + + SAVE_TITLE + After changing settings above, you must save and restart dhcpd. + + + SAVE/RESTART + Save/Restart + + + DHCPD_SETTING_ERRORS + DHCPd Settings ERRORS + + + DHCP_START_GREATER_DHCP_END_ERRORS + Incorrect range of IPs, the DHCP Start is greater than the DHCP End , Update unsuccessfull]]> + + + CLICK_HERE_TO_MAIN_PANEL + Click Here to return to the main panel]]> + + + DHCP_RANGE_MUST_NOT_INCLUDE_SERVER_IP + Incorrect range of IPs, the range of IP address allocation must not include the server address, Update unsuccessfull]]> + + + DHCP_RANGE_WITH_BAD_IP + Incorrect IP in the DHCP range, Update unsuccessfull]]> + + + WINSSERVER_BAD_IP + Incorrect IP for WINS Server, Update unsuccessfull]]> + + + DNS_SERVER_WITH_BAD_IP + Incorrect IP for DNS servers, Update unsuccessfull]]> + + + GATEWAY_BAD_IP + Incorrect IP for Gateway, Update unsuccessfull]]> + + + SUCCESSFULLY_SAVED_SETTINGS + Successfully saved settings]]> + + + REMOVE_A_DHCP_LEASE_TITLE + Removing a DHCP Lease + + + REMOVE_A_DHCP_LEASE + Remove an entry in dhcpd.leases + + + ARE_YOU_SURE + are you sure ? + + + REMOVE_A_DHCP_LEASE_ACTION + You are about to remove a client from the dhcpd.leases file. + + + SUCCESSFULLY_DELETED_THE_CLIENT + Successfully deleted in dhcpd.leases the client : ]]> + + + WAKING_A_REMOTE_COMPUTER_TITLE + Waking Up a remote computer + + + WAKING_A_REMOTE_COMPUTER + You are about to wake up a remote computer. + + + WAKING_A_REMOTE_COMPUTER_ACTION + Are you sure you want to wake on lan the client : + + + + WAKE_UP + Wake UP + + + REMOVE + Удалить + + + SUCCESSFULLY_CLIENT_WOL_REQUEST + Successfully request to wake up the client. The computer may take time to wake up.]]> + + + ALL_OF_THEM + All of them + + + SENDING_A_WINPOPUP + Sending a WinPopup + + + SENDING_A_WINPOPUP_TO + You are about to send a WinPopup to + + + YOUR_MESSAGE + Ваше сообщение + + + WRITE_YOUR_MESSAGE + Write your message here + + + DO_YOU_WANT_TO_SENT + Do you want to send this message to + + + SEND_WINPOPUP_TO + Send a WinPopup to + + + SUCCESSFULLY_SENT_MESSAGE + Successfully sent message popup to]]> + + + WARNING_NO_WINPOPUP_GARANTY + Warning, there is no garanty that the popup will appear on the remote computer.]]> + + + MANAGING_DHCP_CLIENT + Managing DHCP clients + + + STATUS_REPORT + Operation status report : + + + REFRESH_CONNECTED_IP_LIST + You may want to refresh this list ? + + + REFRESH + Refresh the list + + + CLEAN_ALL_DHCPLEASES + You may want to clean the dhcp.leases + + + REMOVE_ALL_LEASES + Remove all leases + + + NETWORK_NAME + Network Name + + + STATUS_CLICK_FOR_WOL + Status - click for WOL + + + START_DATE + Start Date + + + END_DATE + End Date + + + MAC_ADDRESS + MAC Address + + + NOT_CHECKED + Not Checked...]]> + + + ACTIVE_DEVICE + Active Device]]> + + + WAKE_UP_ACTION + Wake-Up...]]> + + + REMOVE_ACTION + Remove... + + + WINPOPUP_ACTION + WinPopup... + + + NO_CONNECTED_COMPUTERS + There are no connected computers + + + REMOVE_DHCP_LEASE_TITLE + Removing all DHCP Lease + + + REMOVE_DHCP_LEASE_WARNING + Remove all entries in dhcpd.leases may cause issues]]> + + + REMOVE_DHCP_LEASE_WARNING2 + The lease file is a log-structured file - whenever a lease changes, the contents of that lease are written to the end of the file. This means that it is entirely possible for there to be two or more declarations of the same lease in the lease file at the same time. In that case, the instance of that particular lease that appears last in the file is the one that is in effect. + + + SUCCESSFULLY_REMOVED_ALL_LEASES + Successfully deleted all leases.]]> + + + REMOVE_ALL_LEASES_ACTION + Remove all dhcp leases + + + SCANNING_NETWORK_TITLE + Scanning your network, the time needed depends of your subnet mask + + + NETWORK_VALUES_FOUND + Please wait .... Your subnet and your netmask appear to be : + + + ERROR_WHILE_REMOVING_ALL_LEASES + Error while removing all dhcp Leases]]> + + + ERROR_WHILE_SAVING_SETTINGS + Error while saving settings]]> + + --- smeserver-dhcpmanager-2.0.2/root/etc/e-smith/locale/sl/etc/e-smith/web/functions/dhcpd 1970-01-01 01:00:00.000000000 +0100 +++ smeserver-dhcpmanager-2.0.2.update/root/etc/e-smith/locale/sl/etc/e-smith/web/functions/dhcpd 2015-08-17 02:31:48.315748087 +0200 @@ -0,0 +1,331 @@ + + + DHCP manager + DHCP Manager + + + DHCPD_TITLE + DHCP Manager + + + DHCPD_SETTINGS_TITLE + Settings of the DHCP server + + + CONNECTED_IP + Show DHCP Clients + + + SCAN_YOUR_NETWORK + Scan your network + + + GLOBAL_WINPOPUP + Send Global Netsend WinPopup + + + CHECK_CLIENT_STATUS + Always check the status of computers (Disabled is much faster) + + + SHOW_CONNECTED_IP_TITLE + Show all devices connected to the dhcp server : + + + SCAN_YOUR_NETWORK_TITLE + Scan your network to show active devices : + + + GLOBAL_WINPOPUP_TITLE + Send a global WinPopup with the Net send protocol + + + STATUS_DHCP_SERVER + State of DHCPD + + + DHCP_START + DHCP Start + + + DHCP_END + DHCP End + + + CUSTOM_WINSERVER_TITLE + Enable a WINS Server. + + + CUSTOM_WINSERVER_STATUS + WINS Server + + + CUSTOM_WINSERVER_ADDRESS + WINS Server address + + + CUSTOM_DNS_TITLE + Enable custom DNS servers. + + + CUSTOM_DNS_STATUS + Custom DNS + + + PRIMARY_DNS_ADDRESS + Primary DNS + + + SECONDARY_DNS_ADDRESS + Secondary DNS + + + CUSTOM_GATEWAY_TITLE + Enable a custom gateway address. + + + CUSTOM_GATEWAY_STATUS + Custom gateway + + + CUSTOM_GATEWAY_ADDRESS + Gateway address + + + CUSTOM_LEASETIME_TITLE + Set the lease time (default is 86400 seconds). + + + CUSTOM_LEASETIME + Custom lease time + + + SAVE_TITLE + After changing settings above, you must save and restart dhcpd. + + + SAVE/RESTART + Save/Restart + + + DHCPD_SETTING_ERRORS + DHCPd Settings ERRORS + + + DHCP_START_GREATER_DHCP_END_ERRORS + Incorrect range of IPs, the DHCP Start is greater than the DHCP End , Update unsuccessfull]]> + + + CLICK_HERE_TO_MAIN_PANEL + Click Here to return to the main panel]]> + + + DHCP_RANGE_MUST_NOT_INCLUDE_SERVER_IP + Incorrect range of IPs, the range of IP address allocation must not include the server address, Update unsuccessfull]]> + + + DHCP_RANGE_WITH_BAD_IP + Incorrect IP in the DHCP range, Update unsuccessfull]]> + + + WINSSERVER_BAD_IP + Incorrect IP for WINS Server, Update unsuccessfull]]> + + + DNS_SERVER_WITH_BAD_IP + Incorrect IP for DNS servers, Update unsuccessfull]]> + + + GATEWAY_BAD_IP + Incorrect IP for Gateway, Update unsuccessfull]]> + + + SUCCESSFULLY_SAVED_SETTINGS + Successfully saved settings]]> + + + REMOVE_A_DHCP_LEASE_TITLE + Removing a DHCP Lease + + + REMOVE_A_DHCP_LEASE + Remove an entry in dhcpd.leases + + + ARE_YOU_SURE + are you sure ? + + + REMOVE_A_DHCP_LEASE_ACTION + You are about to remove a client from the dhcpd.leases file. + + + SUCCESSFULLY_DELETED_THE_CLIENT + Successfully deleted in dhcpd.leases the client : ]]> + + + WAKING_A_REMOTE_COMPUTER_TITLE + Waking Up a remote computer + + + WAKING_A_REMOTE_COMPUTER + You are about to wake up a remote computer. + + + WAKING_A_REMOTE_COMPUTER_ACTION + Are you sure you want to wake on lan the client : + + + + WAKE_UP + Wake UP + + + REMOVE + Odstrani + + + SUCCESSFULLY_CLIENT_WOL_REQUEST + Successfully request to wake up the client. The computer may take time to wake up.]]> + + + ALL_OF_THEM + All of them + + + SENDING_A_WINPOPUP + Sending a WinPopup + + + SENDING_A_WINPOPUP_TO + You are about to send a WinPopup to + + + YOUR_MESSAGE + Vaše sporočilo + + + WRITE_YOUR_MESSAGE + Write your message here + + + DO_YOU_WANT_TO_SENT + Do you want to send this message to + + + SEND_WINPOPUP_TO + Send a WinPopup to + + + SUCCESSFULLY_SENT_MESSAGE + Successfully sent message popup to]]> + + + WARNING_NO_WINPOPUP_GARANTY + Warning, there is no garanty that the popup will appear on the remote computer.]]> + + + MANAGING_DHCP_CLIENT + Managing DHCP clients + + + STATUS_REPORT + Operation status report : + + + REFRESH_CONNECTED_IP_LIST + You may want to refresh this list ? + + + REFRESH + Refresh the list + + + CLEAN_ALL_DHCPLEASES + You may want to clean the dhcp.leases + + + REMOVE_ALL_LEASES + Remove all leases + + + NETWORK_NAME + Network Name + + + STATUS_CLICK_FOR_WOL + Status - click for WOL + + + START_DATE + Start Date + + + END_DATE + End Date + + + MAC_ADDRESS + MAC Address + + + NOT_CHECKED + Not Checked...]]> + + + ACTIVE_DEVICE + Active Device]]> + + + WAKE_UP_ACTION + Wake-Up...]]> + + + REMOVE_ACTION + Remove... + + + WINPOPUP_ACTION + WinPopup... + + + NO_CONNECTED_COMPUTERS + There are no connected computers + + + REMOVE_DHCP_LEASE_TITLE + Removing all DHCP Lease + + + REMOVE_DHCP_LEASE_WARNING + Remove all entries in dhcpd.leases may cause issues]]> + + + REMOVE_DHCP_LEASE_WARNING2 + The lease file is a log-structured file - whenever a lease changes, the contents of that lease are written to the end of the file. This means that it is entirely possible for there to be two or more declarations of the same lease in the lease file at the same time. In that case, the instance of that particular lease that appears last in the file is the one that is in effect. + + + SUCCESSFULLY_REMOVED_ALL_LEASES + Successfully deleted all leases.]]> + + + REMOVE_ALL_LEASES_ACTION + Remove all dhcp leases + + + SCANNING_NETWORK_TITLE + Scanning your network, the time needed depends of your subnet mask + + + NETWORK_VALUES_FOUND + Please wait .... Your subnet and your netmask appear to be : + + + ERROR_WHILE_REMOVING_ALL_LEASES + Error while removing all dhcp Leases]]> + + + ERROR_WHILE_SAVING_SETTINGS + Error while saving settings]]> + + --- smeserver-dhcpmanager-2.0.2/root/etc/e-smith/locale/sv/etc/e-smith/web/functions/dhcpd 1970-01-01 01:00:00.000000000 +0100 +++ smeserver-dhcpmanager-2.0.2.update/root/etc/e-smith/locale/sv/etc/e-smith/web/functions/dhcpd 2015-08-17 02:31:48.483748076 +0200 @@ -0,0 +1,331 @@ + + + DHCP manager + DHCP Manager + + + DHCPD_TITLE + DHCP Manager + + + DHCPD_SETTINGS_TITLE + Settings of the DHCP server + + + CONNECTED_IP + Show DHCP Clients + + + SCAN_YOUR_NETWORK + Scan your network + + + GLOBAL_WINPOPUP + Send Global Netsend WinPopup + + + CHECK_CLIENT_STATUS + Always check the status of computers (Disabled is much faster) + + + SHOW_CONNECTED_IP_TITLE + Show all devices connected to the dhcp server : + + + SCAN_YOUR_NETWORK_TITLE + Scan your network to show active devices : + + + GLOBAL_WINPOPUP_TITLE + Send a global WinPopup with the Net send protocol + + + STATUS_DHCP_SERVER + State of DHCPD + + + DHCP_START + DHCP Start + + + DHCP_END + DHCP End + + + CUSTOM_WINSERVER_TITLE + Enable a WINS Server. + + + CUSTOM_WINSERVER_STATUS + WINS Server + + + CUSTOM_WINSERVER_ADDRESS + WINS Server address + + + CUSTOM_DNS_TITLE + Enable custom DNS servers. + + + CUSTOM_DNS_STATUS + Custom DNS + + + PRIMARY_DNS_ADDRESS + Primary DNS + + + SECONDARY_DNS_ADDRESS + Secondary DNS + + + CUSTOM_GATEWAY_TITLE + Enable a custom gateway address. + + + CUSTOM_GATEWAY_STATUS + Custom gateway + + + CUSTOM_GATEWAY_ADDRESS + Gateway address + + + CUSTOM_LEASETIME_TITLE + Set the lease time (default is 86400 seconds). + + + CUSTOM_LEASETIME + Custom lease time + + + SAVE_TITLE + After changing settings above, you must save and restart dhcpd. + + + SAVE/RESTART + Save/Restart + + + DHCPD_SETTING_ERRORS + DHCPd Settings ERRORS + + + DHCP_START_GREATER_DHCP_END_ERRORS + Incorrect range of IPs, the DHCP Start is greater than the DHCP End , Update unsuccessfull]]> + + + CLICK_HERE_TO_MAIN_PANEL + Click Here to return to the main panel]]> + + + DHCP_RANGE_MUST_NOT_INCLUDE_SERVER_IP + Incorrect range of IPs, the range of IP address allocation must not include the server address, Update unsuccessfull]]> + + + DHCP_RANGE_WITH_BAD_IP + Incorrect IP in the DHCP range, Update unsuccessfull]]> + + + WINSSERVER_BAD_IP + Incorrect IP for WINS Server, Update unsuccessfull]]> + + + DNS_SERVER_WITH_BAD_IP + Incorrect IP for DNS servers, Update unsuccessfull]]> + + + GATEWAY_BAD_IP + Incorrect IP for Gateway, Update unsuccessfull]]> + + + SUCCESSFULLY_SAVED_SETTINGS + Successfully saved settings]]> + + + REMOVE_A_DHCP_LEASE_TITLE + Removing a DHCP Lease + + + REMOVE_A_DHCP_LEASE + Remove an entry in dhcpd.leases + + + ARE_YOU_SURE + are you sure ? + + + REMOVE_A_DHCP_LEASE_ACTION + You are about to remove a client from the dhcpd.leases file. + + + SUCCESSFULLY_DELETED_THE_CLIENT + Successfully deleted in dhcpd.leases the client : ]]> + + + WAKING_A_REMOTE_COMPUTER_TITLE + Waking Up a remote computer + + + WAKING_A_REMOTE_COMPUTER + You are about to wake up a remote computer. + + + WAKING_A_REMOTE_COMPUTER_ACTION + Are you sure you want to wake on lan the client : + + + + WAKE_UP + Wake UP + + + REMOVE + Radera + + + SUCCESSFULLY_CLIENT_WOL_REQUEST + Successfully request to wake up the client. The computer may take time to wake up.]]> + + + ALL_OF_THEM + All of them + + + SENDING_A_WINPOPUP + Sending a WinPopup + + + SENDING_A_WINPOPUP_TO + You are about to send a WinPopup to + + + YOUR_MESSAGE + Ditt meddelande + + + WRITE_YOUR_MESSAGE + Write your message here + + + DO_YOU_WANT_TO_SENT + Do you want to send this message to + + + SEND_WINPOPUP_TO + Send a WinPopup to + + + SUCCESSFULLY_SENT_MESSAGE + Successfully sent message popup to]]> + + + WARNING_NO_WINPOPUP_GARANTY + Warning, there is no garanty that the popup will appear on the remote computer.]]> + + + MANAGING_DHCP_CLIENT + Managing DHCP clients + + + STATUS_REPORT + Operation status report : + + + REFRESH_CONNECTED_IP_LIST + You may want to refresh this list ? + + + REFRESH + Refresh the list + + + CLEAN_ALL_DHCPLEASES + You may want to clean the dhcp.leases + + + REMOVE_ALL_LEASES + Remove all leases + + + NETWORK_NAME + Network Name + + + STATUS_CLICK_FOR_WOL + Status - click for WOL + + + START_DATE + Start Date + + + END_DATE + End Date + + + MAC_ADDRESS + MAC Address + + + NOT_CHECKED + Not Checked...]]> + + + ACTIVE_DEVICE + Active Device]]> + + + WAKE_UP_ACTION + Wake-Up...]]> + + + REMOVE_ACTION + Remove... + + + WINPOPUP_ACTION + WinPopup... + + + NO_CONNECTED_COMPUTERS + There are no connected computers + + + REMOVE_DHCP_LEASE_TITLE + Removing all DHCP Lease + + + REMOVE_DHCP_LEASE_WARNING + Remove all entries in dhcpd.leases may cause issues]]> + + + REMOVE_DHCP_LEASE_WARNING2 + The lease file is a log-structured file - whenever a lease changes, the contents of that lease are written to the end of the file. This means that it is entirely possible for there to be two or more declarations of the same lease in the lease file at the same time. In that case, the instance of that particular lease that appears last in the file is the one that is in effect. + + + SUCCESSFULLY_REMOVED_ALL_LEASES + Successfully deleted all leases.]]> + + + REMOVE_ALL_LEASES_ACTION + Remove all dhcp leases + + + SCANNING_NETWORK_TITLE + Scanning your network, the time needed depends of your subnet mask + + + NETWORK_VALUES_FOUND + Please wait .... Your subnet and your netmask appear to be : + + + ERROR_WHILE_REMOVING_ALL_LEASES + Error while removing all dhcp Leases]]> + + + ERROR_WHILE_SAVING_SETTINGS + Error while saving settings]]> + + --- smeserver-dhcpmanager-2.0.2/root/etc/e-smith/locale/th/etc/e-smith/web/functions/dhcpd 1970-01-01 01:00:00.000000000 +0100 +++ smeserver-dhcpmanager-2.0.2.update/root/etc/e-smith/locale/th/etc/e-smith/web/functions/dhcpd 2015-08-17 02:31:48.640748067 +0200 @@ -0,0 +1,331 @@ + + + DHCP manager + DHCP Manager + + + DHCPD_TITLE + DHCP Manager + + + DHCPD_SETTINGS_TITLE + Settings of the DHCP server + + + CONNECTED_IP + Show DHCP Clients + + + SCAN_YOUR_NETWORK + Scan your network + + + GLOBAL_WINPOPUP + Send Global Netsend WinPopup + + + CHECK_CLIENT_STATUS + Always check the status of computers (Disabled is much faster) + + + SHOW_CONNECTED_IP_TITLE + Show all devices connected to the dhcp server : + + + SCAN_YOUR_NETWORK_TITLE + Scan your network to show active devices : + + + GLOBAL_WINPOPUP_TITLE + Send a global WinPopup with the Net send protocol + + + STATUS_DHCP_SERVER + State of DHCPD + + + DHCP_START + DHCP Start + + + DHCP_END + DHCP End + + + CUSTOM_WINSERVER_TITLE + Enable a WINS Server. + + + CUSTOM_WINSERVER_STATUS + WINS Server + + + CUSTOM_WINSERVER_ADDRESS + WINS Server address + + + CUSTOM_DNS_TITLE + Enable custom DNS servers. + + + CUSTOM_DNS_STATUS + Custom DNS + + + PRIMARY_DNS_ADDRESS + Primary DNS + + + SECONDARY_DNS_ADDRESS + Secondary DNS + + + CUSTOM_GATEWAY_TITLE + Enable a custom gateway address. + + + CUSTOM_GATEWAY_STATUS + Custom gateway + + + CUSTOM_GATEWAY_ADDRESS + Gateway address + + + CUSTOM_LEASETIME_TITLE + Set the lease time (default is 86400 seconds). + + + CUSTOM_LEASETIME + Custom lease time + + + SAVE_TITLE + After changing settings above, you must save and restart dhcpd. + + + SAVE/RESTART + Save/Restart + + + DHCPD_SETTING_ERRORS + DHCPd Settings ERRORS + + + DHCP_START_GREATER_DHCP_END_ERRORS + Incorrect range of IPs, the DHCP Start is greater than the DHCP End , Update unsuccessfull]]> + + + CLICK_HERE_TO_MAIN_PANEL + Click Here to return to the main panel]]> + + + DHCP_RANGE_MUST_NOT_INCLUDE_SERVER_IP + Incorrect range of IPs, the range of IP address allocation must not include the server address, Update unsuccessfull]]> + + + DHCP_RANGE_WITH_BAD_IP + Incorrect IP in the DHCP range, Update unsuccessfull]]> + + + WINSSERVER_BAD_IP + Incorrect IP for WINS Server, Update unsuccessfull]]> + + + DNS_SERVER_WITH_BAD_IP + Incorrect IP for DNS servers, Update unsuccessfull]]> + + + GATEWAY_BAD_IP + Incorrect IP for Gateway, Update unsuccessfull]]> + + + SUCCESSFULLY_SAVED_SETTINGS + Successfully saved settings]]> + + + REMOVE_A_DHCP_LEASE_TITLE + Removing a DHCP Lease + + + REMOVE_A_DHCP_LEASE + Remove an entry in dhcpd.leases + + + ARE_YOU_SURE + are you sure ? + + + REMOVE_A_DHCP_LEASE_ACTION + You are about to remove a client from the dhcpd.leases file. + + + SUCCESSFULLY_DELETED_THE_CLIENT + Successfully deleted in dhcpd.leases the client : ]]> + + + WAKING_A_REMOTE_COMPUTER_TITLE + Waking Up a remote computer + + + WAKING_A_REMOTE_COMPUTER + You are about to wake up a remote computer. + + + WAKING_A_REMOTE_COMPUTER_ACTION + Are you sure you want to wake on lan the client : + + + + WAKE_UP + Wake UP + + + REMOVE + ลบ + + + SUCCESSFULLY_CLIENT_WOL_REQUEST + Successfully request to wake up the client. The computer may take time to wake up.]]> + + + ALL_OF_THEM + All of them + + + SENDING_A_WINPOPUP + Sending a WinPopup + + + SENDING_A_WINPOPUP_TO + You are about to send a WinPopup to + + + YOUR_MESSAGE + Your message + + + WRITE_YOUR_MESSAGE + Write your message here + + + DO_YOU_WANT_TO_SENT + Do you want to send this message to + + + SEND_WINPOPUP_TO + Send a WinPopup to + + + SUCCESSFULLY_SENT_MESSAGE + Successfully sent message popup to]]> + + + WARNING_NO_WINPOPUP_GARANTY + Warning, there is no garanty that the popup will appear on the remote computer.]]> + + + MANAGING_DHCP_CLIENT + Managing DHCP clients + + + STATUS_REPORT + Operation status report : + + + REFRESH_CONNECTED_IP_LIST + You may want to refresh this list ? + + + REFRESH + Refresh the list + + + CLEAN_ALL_DHCPLEASES + You may want to clean the dhcp.leases + + + REMOVE_ALL_LEASES + Remove all leases + + + NETWORK_NAME + Network Name + + + STATUS_CLICK_FOR_WOL + Status - click for WOL + + + START_DATE + Start Date + + + END_DATE + End Date + + + MAC_ADDRESS + MAC Address + + + NOT_CHECKED + Not Checked...]]> + + + ACTIVE_DEVICE + Active Device]]> + + + WAKE_UP_ACTION + Wake-Up...]]> + + + REMOVE_ACTION + Remove... + + + WINPOPUP_ACTION + WinPopup... + + + NO_CONNECTED_COMPUTERS + There are no connected computers + + + REMOVE_DHCP_LEASE_TITLE + Removing all DHCP Lease + + + REMOVE_DHCP_LEASE_WARNING + Remove all entries in dhcpd.leases may cause issues]]> + + + REMOVE_DHCP_LEASE_WARNING2 + The lease file is a log-structured file - whenever a lease changes, the contents of that lease are written to the end of the file. This means that it is entirely possible for there to be two or more declarations of the same lease in the lease file at the same time. In that case, the instance of that particular lease that appears last in the file is the one that is in effect. + + + SUCCESSFULLY_REMOVED_ALL_LEASES + Successfully deleted all leases.]]> + + + REMOVE_ALL_LEASES_ACTION + Remove all dhcp leases + + + SCANNING_NETWORK_TITLE + Scanning your network, the time needed depends of your subnet mask + + + NETWORK_VALUES_FOUND + Please wait .... Your subnet and your netmask appear to be : + + + ERROR_WHILE_REMOVING_ALL_LEASES + Error while removing all dhcp Leases]]> + + + ERROR_WHILE_SAVING_SETTINGS + Error while saving settings]]> + + --- smeserver-dhcpmanager-2.0.2/root/etc/e-smith/locale/tr/etc/e-smith/web/functions/dhcpd 1970-01-01 01:00:00.000000000 +0100 +++ smeserver-dhcpmanager-2.0.2.update/root/etc/e-smith/locale/tr/etc/e-smith/web/functions/dhcpd 2015-08-17 02:31:48.824748057 +0200 @@ -0,0 +1,331 @@ + + + DHCP manager + DHCP Manager + + + DHCPD_TITLE + DHCP Manager + + + DHCPD_SETTINGS_TITLE + Settings of the DHCP server + + + CONNECTED_IP + Show DHCP Clients + + + SCAN_YOUR_NETWORK + Scan your network + + + GLOBAL_WINPOPUP + Send Global Netsend WinPopup + + + CHECK_CLIENT_STATUS + Always check the status of computers (Disabled is much faster) + + + SHOW_CONNECTED_IP_TITLE + Show all devices connected to the dhcp server : + + + SCAN_YOUR_NETWORK_TITLE + Scan your network to show active devices : + + + GLOBAL_WINPOPUP_TITLE + Send a global WinPopup with the Net send protocol + + + STATUS_DHCP_SERVER + State of DHCPD + + + DHCP_START + DHCP Start + + + DHCP_END + DHCP End + + + CUSTOM_WINSERVER_TITLE + Enable a WINS Server. + + + CUSTOM_WINSERVER_STATUS + WINS Server + + + CUSTOM_WINSERVER_ADDRESS + WINS Server address + + + CUSTOM_DNS_TITLE + Enable custom DNS servers. + + + CUSTOM_DNS_STATUS + Custom DNS + + + PRIMARY_DNS_ADDRESS + Primary DNS + + + SECONDARY_DNS_ADDRESS + Secondary DNS + + + CUSTOM_GATEWAY_TITLE + Enable a custom gateway address. + + + CUSTOM_GATEWAY_STATUS + Custom gateway + + + CUSTOM_GATEWAY_ADDRESS + Gateway address + + + CUSTOM_LEASETIME_TITLE + Set the lease time (default is 86400 seconds). + + + CUSTOM_LEASETIME + Custom lease time + + + SAVE_TITLE + After changing settings above, you must save and restart dhcpd. + + + SAVE/RESTART + Save/Restart + + + DHCPD_SETTING_ERRORS + DHCPd Settings ERRORS + + + DHCP_START_GREATER_DHCP_END_ERRORS + Incorrect range of IPs, the DHCP Start is greater than the DHCP End , Update unsuccessfull]]> + + + CLICK_HERE_TO_MAIN_PANEL + Click Here to return to the main panel]]> + + + DHCP_RANGE_MUST_NOT_INCLUDE_SERVER_IP + Incorrect range of IPs, the range of IP address allocation must not include the server address, Update unsuccessfull]]> + + + DHCP_RANGE_WITH_BAD_IP + Incorrect IP in the DHCP range, Update unsuccessfull]]> + + + WINSSERVER_BAD_IP + Incorrect IP for WINS Server, Update unsuccessfull]]> + + + DNS_SERVER_WITH_BAD_IP + Incorrect IP for DNS servers, Update unsuccessfull]]> + + + GATEWAY_BAD_IP + Incorrect IP for Gateway, Update unsuccessfull]]> + + + SUCCESSFULLY_SAVED_SETTINGS + Successfully saved settings]]> + + + REMOVE_A_DHCP_LEASE_TITLE + Removing a DHCP Lease + + + REMOVE_A_DHCP_LEASE + Remove an entry in dhcpd.leases + + + ARE_YOU_SURE + are you sure ? + + + REMOVE_A_DHCP_LEASE_ACTION + You are about to remove a client from the dhcpd.leases file. + + + SUCCESSFULLY_DELETED_THE_CLIENT + Successfully deleted in dhcpd.leases the client : ]]> + + + WAKING_A_REMOTE_COMPUTER_TITLE + Waking Up a remote computer + + + WAKING_A_REMOTE_COMPUTER + You are about to wake up a remote computer. + + + WAKING_A_REMOTE_COMPUTER_ACTION + Are you sure you want to wake on lan the client : + + + + WAKE_UP + Wake UP + + + REMOVE + Kaldır + + + SUCCESSFULLY_CLIENT_WOL_REQUEST + Successfully request to wake up the client. The computer may take time to wake up.]]> + + + ALL_OF_THEM + All of them + + + SENDING_A_WINPOPUP + Sending a WinPopup + + + SENDING_A_WINPOPUP_TO + You are about to send a WinPopup to + + + YOUR_MESSAGE + Mesajınız + + + WRITE_YOUR_MESSAGE + Write your message here + + + DO_YOU_WANT_TO_SENT + Do you want to send this message to + + + SEND_WINPOPUP_TO + Send a WinPopup to + + + SUCCESSFULLY_SENT_MESSAGE + Successfully sent message popup to]]> + + + WARNING_NO_WINPOPUP_GARANTY + Warning, there is no garanty that the popup will appear on the remote computer.]]> + + + MANAGING_DHCP_CLIENT + Managing DHCP clients + + + STATUS_REPORT + Operation status report : + + + REFRESH_CONNECTED_IP_LIST + You may want to refresh this list ? + + + REFRESH + Refresh the list + + + CLEAN_ALL_DHCPLEASES + You may want to clean the dhcp.leases + + + REMOVE_ALL_LEASES + Remove all leases + + + NETWORK_NAME + Network Name + + + STATUS_CLICK_FOR_WOL + Status - click for WOL + + + START_DATE + Start Date + + + END_DATE + End Date + + + MAC_ADDRESS + MAC Address + + + NOT_CHECKED + Not Checked...]]> + + + ACTIVE_DEVICE + Active Device]]> + + + WAKE_UP_ACTION + Wake-Up...]]> + + + REMOVE_ACTION + Remove... + + + WINPOPUP_ACTION + WinPopup... + + + NO_CONNECTED_COMPUTERS + There are no connected computers + + + REMOVE_DHCP_LEASE_TITLE + Removing all DHCP Lease + + + REMOVE_DHCP_LEASE_WARNING + Remove all entries in dhcpd.leases may cause issues]]> + + + REMOVE_DHCP_LEASE_WARNING2 + The lease file is a log-structured file - whenever a lease changes, the contents of that lease are written to the end of the file. This means that it is entirely possible for there to be two or more declarations of the same lease in the lease file at the same time. In that case, the instance of that particular lease that appears last in the file is the one that is in effect. + + + SUCCESSFULLY_REMOVED_ALL_LEASES + Successfully deleted all leases.]]> + + + REMOVE_ALL_LEASES_ACTION + Remove all dhcp leases + + + SCANNING_NETWORK_TITLE + Scanning your network, the time needed depends of your subnet mask + + + NETWORK_VALUES_FOUND + Please wait .... Your subnet and your netmask appear to be : + + + ERROR_WHILE_REMOVING_ALL_LEASES + Error while removing all dhcp Leases]]> + + + ERROR_WHILE_SAVING_SETTINGS + Error while saving settings]]> + + --- smeserver-dhcpmanager-2.0.2/root/etc/e-smith/locale/zh-cn/etc/e-smith/web/functions/dhcpd 1970-01-01 01:00:00.000000000 +0100 +++ smeserver-dhcpmanager-2.0.2.update/root/etc/e-smith/locale/zh-cn/etc/e-smith/web/functions/dhcpd 2015-08-17 02:31:48.967748048 +0200 @@ -0,0 +1,331 @@ + + + DHCP manager + DHCP Manager + + + DHCPD_TITLE + DHCP Manager + + + DHCPD_SETTINGS_TITLE + Settings of the DHCP server + + + CONNECTED_IP + Show DHCP Clients + + + SCAN_YOUR_NETWORK + Scan your network + + + GLOBAL_WINPOPUP + Send Global Netsend WinPopup + + + CHECK_CLIENT_STATUS + Always check the status of computers (Disabled is much faster) + + + SHOW_CONNECTED_IP_TITLE + Show all devices connected to the dhcp server : + + + SCAN_YOUR_NETWORK_TITLE + Scan your network to show active devices : + + + GLOBAL_WINPOPUP_TITLE + Send a global WinPopup with the Net send protocol + + + STATUS_DHCP_SERVER + State of DHCPD + + + DHCP_START + DHCP Start + + + DHCP_END + DHCP End + + + CUSTOM_WINSERVER_TITLE + Enable a WINS Server. + + + CUSTOM_WINSERVER_STATUS + WINS Server + + + CUSTOM_WINSERVER_ADDRESS + WINS Server address + + + CUSTOM_DNS_TITLE + Enable custom DNS servers. + + + CUSTOM_DNS_STATUS + Custom DNS + + + PRIMARY_DNS_ADDRESS + Primary DNS + + + SECONDARY_DNS_ADDRESS + Secondary DNS + + + CUSTOM_GATEWAY_TITLE + Enable a custom gateway address. + + + CUSTOM_GATEWAY_STATUS + Custom gateway + + + CUSTOM_GATEWAY_ADDRESS + Gateway address + + + CUSTOM_LEASETIME_TITLE + Set the lease time (default is 86400 seconds). + + + CUSTOM_LEASETIME + Custom lease time + + + SAVE_TITLE + After changing settings above, you must save and restart dhcpd. + + + SAVE/RESTART + Save/Restart + + + DHCPD_SETTING_ERRORS + DHCPd Settings ERRORS + + + DHCP_START_GREATER_DHCP_END_ERRORS + Incorrect range of IPs, the DHCP Start is greater than the DHCP End , Update unsuccessfull]]> + + + CLICK_HERE_TO_MAIN_PANEL + Click Here to return to the main panel]]> + + + DHCP_RANGE_MUST_NOT_INCLUDE_SERVER_IP + Incorrect range of IPs, the range of IP address allocation must not include the server address, Update unsuccessfull]]> + + + DHCP_RANGE_WITH_BAD_IP + Incorrect IP in the DHCP range, Update unsuccessfull]]> + + + WINSSERVER_BAD_IP + Incorrect IP for WINS Server, Update unsuccessfull]]> + + + DNS_SERVER_WITH_BAD_IP + Incorrect IP for DNS servers, Update unsuccessfull]]> + + + GATEWAY_BAD_IP + Incorrect IP for Gateway, Update unsuccessfull]]> + + + SUCCESSFULLY_SAVED_SETTINGS + Successfully saved settings]]> + + + REMOVE_A_DHCP_LEASE_TITLE + Removing a DHCP Lease + + + REMOVE_A_DHCP_LEASE + Remove an entry in dhcpd.leases + + + ARE_YOU_SURE + are you sure ? + + + REMOVE_A_DHCP_LEASE_ACTION + You are about to remove a client from the dhcpd.leases file. + + + SUCCESSFULLY_DELETED_THE_CLIENT + Successfully deleted in dhcpd.leases the client : ]]> + + + WAKING_A_REMOTE_COMPUTER_TITLE + Waking Up a remote computer + + + WAKING_A_REMOTE_COMPUTER + You are about to wake up a remote computer. + + + WAKING_A_REMOTE_COMPUTER_ACTION + Are you sure you want to wake on lan the client : + + + + WAKE_UP + Wake UP + + + REMOVE + 移除 + + + SUCCESSFULLY_CLIENT_WOL_REQUEST + Successfully request to wake up the client. The computer may take time to wake up.]]> + + + ALL_OF_THEM + All of them + + + SENDING_A_WINPOPUP + Sending a WinPopup + + + SENDING_A_WINPOPUP_TO + You are about to send a WinPopup to + + + YOUR_MESSAGE + 您的消息 + + + WRITE_YOUR_MESSAGE + Write your message here + + + DO_YOU_WANT_TO_SENT + Do you want to send this message to + + + SEND_WINPOPUP_TO + Send a WinPopup to + + + SUCCESSFULLY_SENT_MESSAGE + Successfully sent message popup to]]> + + + WARNING_NO_WINPOPUP_GARANTY + Warning, there is no garanty that the popup will appear on the remote computer.]]> + + + MANAGING_DHCP_CLIENT + Managing DHCP clients + + + STATUS_REPORT + Operation status report : + + + REFRESH_CONNECTED_IP_LIST + You may want to refresh this list ? + + + REFRESH + Refresh the list + + + CLEAN_ALL_DHCPLEASES + You may want to clean the dhcp.leases + + + REMOVE_ALL_LEASES + Remove all leases + + + NETWORK_NAME + Network Name + + + STATUS_CLICK_FOR_WOL + Status - click for WOL + + + START_DATE + Start Date + + + END_DATE + End Date + + + MAC_ADDRESS + MAC Address + + + NOT_CHECKED + Not Checked...]]> + + + ACTIVE_DEVICE + Active Device]]> + + + WAKE_UP_ACTION + Wake-Up...]]> + + + REMOVE_ACTION + Remove... + + + WINPOPUP_ACTION + WinPopup... + + + NO_CONNECTED_COMPUTERS + There are no connected computers + + + REMOVE_DHCP_LEASE_TITLE + Removing all DHCP Lease + + + REMOVE_DHCP_LEASE_WARNING + Remove all entries in dhcpd.leases may cause issues]]> + + + REMOVE_DHCP_LEASE_WARNING2 + The lease file is a log-structured file - whenever a lease changes, the contents of that lease are written to the end of the file. This means that it is entirely possible for there to be two or more declarations of the same lease in the lease file at the same time. In that case, the instance of that particular lease that appears last in the file is the one that is in effect. + + + SUCCESSFULLY_REMOVED_ALL_LEASES + Successfully deleted all leases.]]> + + + REMOVE_ALL_LEASES_ACTION + Remove all dhcp leases + + + SCANNING_NETWORK_TITLE + Scanning your network, the time needed depends of your subnet mask + + + NETWORK_VALUES_FOUND + Please wait .... Your subnet and your netmask appear to be : + + + ERROR_WHILE_REMOVING_ALL_LEASES + Error while removing all dhcp Leases]]> + + + ERROR_WHILE_SAVING_SETTINGS + Error while saving settings]]> + + --- smeserver-dhcpmanager-2.0.2/root/etc/e-smith/locale/zh-tw/etc/e-smith/web/functions/dhcpd 1970-01-01 01:00:00.000000000 +0100 +++ smeserver-dhcpmanager-2.0.2.update/root/etc/e-smith/locale/zh-tw/etc/e-smith/web/functions/dhcpd 2015-08-17 02:31:49.137748040 +0200 @@ -0,0 +1,331 @@ + + + DHCP manager + DHCP Manager + + + DHCPD_TITLE + DHCP Manager + + + DHCPD_SETTINGS_TITLE + Settings of the DHCP server + + + CONNECTED_IP + Show DHCP Clients + + + SCAN_YOUR_NETWORK + Scan your network + + + GLOBAL_WINPOPUP + Send Global Netsend WinPopup + + + CHECK_CLIENT_STATUS + Always check the status of computers (Disabled is much faster) + + + SHOW_CONNECTED_IP_TITLE + Show all devices connected to the dhcp server : + + + SCAN_YOUR_NETWORK_TITLE + Scan your network to show active devices : + + + GLOBAL_WINPOPUP_TITLE + Send a global WinPopup with the Net send protocol + + + STATUS_DHCP_SERVER + State of DHCPD + + + DHCP_START + DHCP Start + + + DHCP_END + DHCP End + + + CUSTOM_WINSERVER_TITLE + Enable a WINS Server. + + + CUSTOM_WINSERVER_STATUS + WINS Server + + + CUSTOM_WINSERVER_ADDRESS + WINS Server address + + + CUSTOM_DNS_TITLE + Enable custom DNS servers. + + + CUSTOM_DNS_STATUS + Custom DNS + + + PRIMARY_DNS_ADDRESS + Primary DNS + + + SECONDARY_DNS_ADDRESS + Secondary DNS + + + CUSTOM_GATEWAY_TITLE + Enable a custom gateway address. + + + CUSTOM_GATEWAY_STATUS + Custom gateway + + + CUSTOM_GATEWAY_ADDRESS + Gateway address + + + CUSTOM_LEASETIME_TITLE + Set the lease time (default is 86400 seconds). + + + CUSTOM_LEASETIME + Custom lease time + + + SAVE_TITLE + After changing settings above, you must save and restart dhcpd. + + + SAVE/RESTART + Save/Restart + + + DHCPD_SETTING_ERRORS + DHCPd Settings ERRORS + + + DHCP_START_GREATER_DHCP_END_ERRORS + Incorrect range of IPs, the DHCP Start is greater than the DHCP End , Update unsuccessfull]]> + + + CLICK_HERE_TO_MAIN_PANEL + Click Here to return to the main panel]]> + + + DHCP_RANGE_MUST_NOT_INCLUDE_SERVER_IP + Incorrect range of IPs, the range of IP address allocation must not include the server address, Update unsuccessfull]]> + + + DHCP_RANGE_WITH_BAD_IP + Incorrect IP in the DHCP range, Update unsuccessfull]]> + + + WINSSERVER_BAD_IP + Incorrect IP for WINS Server, Update unsuccessfull]]> + + + DNS_SERVER_WITH_BAD_IP + Incorrect IP for DNS servers, Update unsuccessfull]]> + + + GATEWAY_BAD_IP + Incorrect IP for Gateway, Update unsuccessfull]]> + + + SUCCESSFULLY_SAVED_SETTINGS + Successfully saved settings]]> + + + REMOVE_A_DHCP_LEASE_TITLE + Removing a DHCP Lease + + + REMOVE_A_DHCP_LEASE + Remove an entry in dhcpd.leases + + + ARE_YOU_SURE + are you sure ? + + + REMOVE_A_DHCP_LEASE_ACTION + You are about to remove a client from the dhcpd.leases file. + + + SUCCESSFULLY_DELETED_THE_CLIENT + Successfully deleted in dhcpd.leases the client : ]]> + + + WAKING_A_REMOTE_COMPUTER_TITLE + Waking Up a remote computer + + + WAKING_A_REMOTE_COMPUTER + You are about to wake up a remote computer. + + + WAKING_A_REMOTE_COMPUTER_ACTION + Are you sure you want to wake on lan the client : + + + + WAKE_UP + Wake UP + + + REMOVE + 移除 + + + SUCCESSFULLY_CLIENT_WOL_REQUEST + Successfully request to wake up the client. The computer may take time to wake up.]]> + + + ALL_OF_THEM + All of them + + + SENDING_A_WINPOPUP + Sending a WinPopup + + + SENDING_A_WINPOPUP_TO + You are about to send a WinPopup to + + + YOUR_MESSAGE + 你的訊息 + + + WRITE_YOUR_MESSAGE + Write your message here + + + DO_YOU_WANT_TO_SENT + Do you want to send this message to + + + SEND_WINPOPUP_TO + Send a WinPopup to + + + SUCCESSFULLY_SENT_MESSAGE + Successfully sent message popup to]]> + + + WARNING_NO_WINPOPUP_GARANTY + Warning, there is no garanty that the popup will appear on the remote computer.]]> + + + MANAGING_DHCP_CLIENT + Managing DHCP clients + + + STATUS_REPORT + Operation status report : + + + REFRESH_CONNECTED_IP_LIST + You may want to refresh this list ? + + + REFRESH + Refresh the list + + + CLEAN_ALL_DHCPLEASES + You may want to clean the dhcp.leases + + + REMOVE_ALL_LEASES + Remove all leases + + + NETWORK_NAME + Network Name + + + STATUS_CLICK_FOR_WOL + Status - click for WOL + + + START_DATE + Start Date + + + END_DATE + End Date + + + MAC_ADDRESS + MAC Address + + + NOT_CHECKED + Not Checked...]]> + + + ACTIVE_DEVICE + Active Device]]> + + + WAKE_UP_ACTION + Wake-Up...]]> + + + REMOVE_ACTION + Remove... + + + WINPOPUP_ACTION + WinPopup... + + + NO_CONNECTED_COMPUTERS + There are no connected computers + + + REMOVE_DHCP_LEASE_TITLE + Removing all DHCP Lease + + + REMOVE_DHCP_LEASE_WARNING + Remove all entries in dhcpd.leases may cause issues]]> + + + REMOVE_DHCP_LEASE_WARNING2 + The lease file is a log-structured file - whenever a lease changes, the contents of that lease are written to the end of the file. This means that it is entirely possible for there to be two or more declarations of the same lease in the lease file at the same time. In that case, the instance of that particular lease that appears last in the file is the one that is in effect. + + + SUCCESSFULLY_REMOVED_ALL_LEASES + Successfully deleted all leases.]]> + + + REMOVE_ALL_LEASES_ACTION + Remove all dhcp leases + + + SCANNING_NETWORK_TITLE + Scanning your network, the time needed depends of your subnet mask + + + NETWORK_VALUES_FOUND + Please wait .... Your subnet and your netmask appear to be : + + + ERROR_WHILE_REMOVING_ALL_LEASES + Error while removing all dhcp Leases]]> + + + ERROR_WHILE_SAVING_SETTINGS + Error while saving settings]]> + +