smeserver-ezmlm-web/contribs8/smeserver-ezmlm-web-1.1.2-configurable.patch

diff -Nur smeserver-ezmlm-web-1.1.2.old/root/etc/e-smith/db/configuration/defaults/ezmlm/debug smeserver-ezmlm-web-1.1.2/root/etc/e-smith/db/configuration/defaults/ezmlm/debug
--- smeserver-ezmlm-web-1.1.2.old/root/etc/e-smith/db/configuration/defaults/ezmlm/debug        1969-12-31 19:00:00.000000000 -0500
+++ smeserver-ezmlm-web-1.1.2/root/etc/e-smith/db/configuration/defaults/ezmlm/debug    2016-04-20 12:43:32.069000000 -0400
@@ -0,0 +1 @@
+disabled
diff -Nur smeserver-ezmlm-web-1.1.2.old/root/etc/e-smith/db/configuration/defaults/ezmlm/encryption smeserver-ezmlm-web-1.1.2/root/etc/e-smith/db/configuration/defaults/ezmlm/encryption
--- smeserver-ezmlm-web-1.1.2.old/root/etc/e-smith/db/configuration/defaults/ezmlm/encryption   1969-12-31 19:00:00.000000000 -0500
+++ smeserver-ezmlm-web-1.1.2/root/etc/e-smith/db/configuration/defaults/ezmlm/encryption       2016-04-20 12:43:39.245000000 -0400
@@ -0,0 +1 @@
+disabled
diff -Nur smeserver-ezmlm-web-1.1.2.old/root/etc/e-smith/db/configuration/defaults/ezmlm/interface smeserver-ezmlm-web-1.1.2/root/etc/e-smith/db/configuration/defaults/ezmlm/interface
--- smeserver-ezmlm-web-1.1.2.old/root/etc/e-smith/db/configuration/defaults/ezmlm/interface    1969-12-31 19:00:00.000000000 -0500
+++ smeserver-ezmlm-web-1.1.2/root/etc/e-smith/db/configuration/defaults/ezmlm/interface        2016-04-20 12:44:00.172000000 -0400
@@ -0,0 +1 @@
+normal
diff -Nur smeserver-ezmlm-web-1.1.2.old/root/etc/e-smith/db/configuration/defaults/ezmlm/options smeserver-ezmlm-web-1.1.2/root/etc/e-smith/db/configuration/defaults/ezmlm/options
--- smeserver-ezmlm-web-1.1.2.old/root/etc/e-smith/db/configuration/defaults/ezmlm/options      1969-12-31 19:00:00.000000000 -0500
+++ smeserver-ezmlm-web-1.1.2/root/etc/e-smith/db/configuration/defaults/ezmlm/options  2016-04-20 12:44:46.749000000 -0400
@@ -0,0 +1 @@
+aBDFGHiJkLMNOpQRSTUWx
diff -Nur smeserver-ezmlm-web-1.1.2.old/root/etc/e-smith/db/configuration/defaults/ezmlm/type smeserver-ezmlm-web-1.1.2/root/etc/e-smith/db/configuration/defaults/ezmlm/type
--- smeserver-ezmlm-web-1.1.2.old/root/etc/e-smith/db/configuration/defaults/ezmlm/type 1969-12-31 19:00:00.000000000 -0500
+++ smeserver-ezmlm-web-1.1.2/root/etc/e-smith/db/configuration/defaults/ezmlm/type     2016-04-20 12:26:52.757000000 -0400
@@ -0,0 +1 @@
+configuration
diff -Nur smeserver-ezmlm-web-1.1.2.old/root/etc/e-smith/templates/etc/ezmlm/ezmlmwebrc/BODY smeserver-ezmlm-web-1.1.2/root/etc/e-smith/templates/etc/ezmlm/ezmlmwebrc/BODY
--- smeserver-ezmlm-web-1.1.2.old/root/etc/e-smith/templates/etc/ezmlm/ezmlmwebrc/BODY  2016-04-20 07:35:06.363000000 -0400
+++ smeserver-ezmlm-web-1.1.2/root/etc/e-smith/templates/etc/ezmlm/ezmlmwebrc/BODY      2016-04-20 12:48:20.128000000 -0400
@@ -2,30 +2,31 @@
 
 $OUT = <<'EOF';
 
-# $Id: ezmlmwebrc,v 1.5 2000/09/25 18:25:26 guy Exp $
-# Configuration file for ezmlm-web 2.1
+# Minimal configuration file for ezmlm-web 3.3
 # ===========================================================================
 
 # This file is not just an ordinary configuration file - it contains valid
 # perl statements that are executed just like any other perl script. When
 # editing this file, be careful that it is still valid perl when you have
 # finished (perl -w ezmlmwebrc ;-)
-
-# It is divided into to logical parts. The first part configures the way
-# ezmlm-web runs, and the second changes the language, etc of ezmlm-web. You
-# can not arbitarilly exclude any statement, since the script doesn't define
-# any defaults of its own. You could, however, always split this file up and
-# include the parts with
-#
-#   require('/path/to/other/part'); 
-
-$opt_c = 1;     # No list creation or deletion
+#.
+# See the manpage of ezmlmwebrc(5) for a list of all available configuration
+# settings.
 
 # ---------------------------------------------------------------------------
 
-# Path to the ezmlm-web 3.3.1 template and laguage files
+# Where do we store lists on this server ... Try "$HOME_DIR/lists"..
+# This directory will automatically be created if needed.
+# BEWARE: the (resulting) path MUST be absolute (starting with a slash)!
+$LIST_DIR = "$HOME_DIR/lists";
+
+# Where are the language files
+# usually something like /usr/local/share/ezmlm-web/lang
 $LANGUAGE_DIR = "/usr/local/share/ezmlm-web/lang";
-$TEMPLATE_DIR ="/usr/local/share/ezmlm-web/template";
+
+# Where are the template files
+# usually something like /usr/local/share/ezmlm-web/template
+$TEMPLATE_DIR = "/usr/local/share/ezmlm-web/template";
 
 # Where do we store lists on this server ... Try "$HOME_DIR/lists". 
 # This directory will automatically be created if needed.
@@ -43,12 +44,6 @@
 # Where do the qmail control files live on this system ...
 $QMAIL_BASE = $Mail::Ezmlm::QMAIL_BASE . '/control';
 
-# The url to our web interface - so we can use ezmlm-cgi if necessary
-$EZMLM_CGI_URL = 'http://some.server.that.has/cgi-bin/ezmlm-cgi';
-
-# Where our ezcgirc file lives (probably /etc/ezmlm/ezcgirc)
-$EZMLM_CGI_RC = '/etc/ezmlm/ezcgirc';
-
 # Do we want to allow ``pretty'' names - ie more human readable ones
 # This will slow ezmlm-web down a bit for large lists
 $PRETTY_NAMES = 1;
@@ -60,247 +55,113 @@
 # What switches to we want ezmlm-web to have on as default. The ezmlm-make
 # defaults are aBDFGHIJKLMNOpQRSTUWX (small means enabled, CAPITALS mean
 # disabled). The defaults below should be reasonable - I use them ;)
-$DEFAULT_OPTIONS = 'aBDFGHiJkLMNOpQRSTUWx';
+EOF
 
-# Where do we find the nice little help icon - by default HELP_ICON_URL
-# points to resources on http://rucus.ru.ac.za/. This will work, but we
-# would appreciate it if you changed this to a local site.
-# $HELP_ICON_URL = '/icons/small/unknown.gif';
-$HELP_ICON_URL = '/server-common/unknown.gif';
-
-# Header for every page (.= concatinates)
-# $HTML_HEADER = '<TABLE BORDER="3" ALIGN="CENTER" CELLPADDING="5"><TR><TD BGCOLOR="#e0e0ff"><FONT SIZE=+3 COLOR=#000080><STRONG>E Z Mailing List Manager</STRONG></FONT></TD></TR></TABLE></CENTER><P>';
-# $HTML_HEADER .= '<TABLE BORDER="0" CELLPADDING="5" CELLSPACING="5" ALIGN="CENTER" WIDTH="99%"><TR><TD BGCOLOR="#e0e0ff">';
-
-$HTML_HEADER =<<END_OF_HEADER;
-
-<LINK REL="stylesheet" TYPE="text/css" HREF="/server-common/css/manager.css">
-
-<TABLE CELLSPACING="0" BORDER="0" CELLPADDING="1" ALIGN="LEFT" WIDTH="100%">
-  <TR VALIGN="BOTTOM">
-    <TD BACKGROUND="/server-common/banner-shim.gif">
-      <IMG BORDER="0" ALT="SME Server ezmlm-web" SRC="/server-common/smeserver_logo.gif">
-    </TD>
-  </TR>
-</TABLE>
-
-<BR CLEAR="ALL">
-<FONT FACE="Helvetica,Arial">
-END_OF_HEADER
-
-# $HTML_HEADER = '<TABLE BORDER="3" ALIGN="CENTER" CELLPADDING="5"><TR><TD BGCOLOR="#ffffff"><FONT SIZE=+3 COLOR=#000000><STRONG>E Z Mailing List Manager</STRONG></FONT></TD></TR></TABLE></CENTER><P>';
-$HTML_HEADER .= '<TABLE BORDER="0" CELLPADDING="5" CELLSPACING="5" ALIGN="CENTER" WIDTH="99%"><TR><TD BGCOLOR="#ffffff">';
-
-# Footer for every page (.= concatinates)
-$HTML_FOOTER = '</TD></TR></TABLE>';
-$HTML_FOOTER .= '<TABLE BORDER="0" CELLPADDING="5" CELLSPACING="5" ALIGN="CENTER" WIDTH="99%"><TR><TD BGCOLOR="#e0e0ff">';
-$HTML_FOOTER .= '<FONT SIZE="-1"><A HREF="http://rucus.ru.ac.za/~guy/ezmlm/#ezmlm-web" TARGET="_blank">ezmlm-web</A> (v2.1) A web interface to <A HREF="http://www.ezmlm.org/" TARGET="_blank">ezmlm</A></FONT></TD></TR></TABLE>';
-
-# What colour do we want the background to be?
-# $HTML_BGCOLOR = '#000080'; 
-$HTML_BGCOLOR = '#FFFFFF'; 
-
-# What colour do we want text?
-$HTML_TEXT = '#000000';
-
-# What color do we want links?
-$HTML_LINK = '#3333ff';
-
-# What color to we want visited links?
-$HTML_VLINK = '#8888ff';
-
-# What is the title of this document?
-# $HTML_TITLE = 'E Z Mailing List Manager';
-$HTML_TITLE = 'Mailing Lists';
+my $options= ($ezmlm->{options} || 'aBDFGHiJkLMNOpQRSTUWx';
+$OUT .= "\$DEFAULT_OPTIONS = '$options'";
 
-# ---------------------------------------------------------------------------
+my $title= ($ezmlm->{title} || 'Koozali SME Server Mailing List Manager';
+$OUT .= "# What is the title of this document?
+\$HTML_TITLE = '$title';";
+
+
+$OUT .= <<'EOF';
+# Optional: some permanent links (visible in the top right corner)
+#@HTML_LINKS = (
+#              { name  => 'ezmlm-web homepage',
+#                      url     => 'https://systemausfall.org/toolforge/ezmlm-web' },
+#              { name  => 'domain\'s root',
+#                              url     => '/'},
+#              );
+
+# Multi-Domain-Support
+# This is a quite advanced setting for special installations.
+# Most people should just ignore it.
+# Anyway - if you want to control more than one directory containing
+# different lists, then you should:
+#  1) copy examples/multidomain.conf.dist to /etc/ezmlm-web/multidomain.conf
+#  2) adjust /etc/ezmlm-web/multidomain.conf to your setup
+#  3) uncomment the following line
+#  4) make sure that your multi domain settings are not overriden by settings below
+#warn "multidomain.conf failed" unless (defined do "/etc/ezmlm-web/multidomain.conf");
+
+# Where do we store the dotqmail files of this user?
+# (defaults to the home directory of the executing user)
+# You will have to change this value, if you use a multi domain
+# vpopmail setup. Otherwise just leave the setting turned off.
+# BEWARE: the (resulting) path MUST be absolute (starting with a slash)!
+#$DOTQMAIL_DIR = "/home/vpopmail/domain";
+
+# Where is the webusers file for access-permissions
+# defaults to "$LIST_DIR/webusers"
+#$WEBUSERS_FILE = "$LIST_DIR/webusers";
+
+# default mailing list domain name (optional)
+#$MAIL_DOMAIN = "lists.someserver.org";
+
+# default prefix of the local part of the addresses of mailing lists
+# useful for some qmail-ldap setups
+#$MAIL_ADDRESS_PREFIX = "lists-";
 
-# The meanings of the various ezmlm-make command line switches. The default
-# ones match the ezmlm-idx 0.4 default ezmlmrc ... Alter them to suit your
-# own ezmlmrc. Removing options from this list makes them unavailable
-# through ezmlm-web - this could be useful for things like -w
-
-%EZMLM_LABELS = (
-#   option => ['Short Name', 
-#              'Long Help Description'],
-
-      a => ['Archived', 
-            'Ezmlm will archive new messages'],
-      b => ['Block archive', 
-            'Only moderators are allowed to access the archive'],
-#     c => config. This is implicity called, so is not defined here
-      d => ['Digest',
-            'Set up a digest list to disseminate digest of the list messages'], 
-#     e => edit. Also implicity called, so not defined here
-      f => ['Prefix',
-            'Outgoing subject will be prefixed with the list name'],
-      g => ['Guard Archive',
-            'Archive access requests from unrecognized SENDERs will be rejected'],
-      h => ['Help subscription',
-            'Subscriptions do not require confirmation'],
-      i => ['Indexed',
-            'Indexed for WWW archive access'],
-      j => ['Jump off',
-            'Unsubscribe does not require  confirmation'],
-      k => ['Kill',
-            'Posts from addresses in dir/deny/ are rejected'], 
-      l => ['Subscriber List',
-            'Remote administrators can request a subscriber list'],
-      m => ['Message Moderation',
-            'All incoming messages are moderated'],
-      n => ['Text Editing', 
-            'Allow remote administrators to edit files in dir/text/'],
-      o => ['Others  rejected', 
-            'Posts from addresses other than moderators are rejected'],
-      p => ['Public',
-            'List will respond to administrative requests and archive retrieval'],
-      q => ['Service Request Address',
-            'Process commands sent in the subject to local-request@host'],
-      r => ['Remote Admin',
-            'Enable remote adminstration of the list'],
-      s => ['Subscription Moderation',
-            'Subscriptions to the main list and digest will be moderated'],
-      t => ['Trailer',
-            'Add a trailer to outgoing messages'], 
-      u => ['User Posts Only',
-            'Posts from unrecognized SENDER addresses will be rejected'], 
-#     v => version. I doubt you will really need this ;-)
-      w => ['Remove Warn',
-            'Remove the ezmlm-warn(1) invocations from the list setup. It is assumed that ezmlm-warn(1) is run by other means'],
-      x => ['Extra',
-            'Strip certain mimetypes, etc'],
-#     y => not used
-#     z => not used
-
-# These all take an extra argument, which is the default value to use
-
-#      0 => ['Sublist', 
-#            'Make the list a sublist of list mainlist@host',
-#            'mainlist@host'],   
-#     1 => not used
-#     2 => not used
-#      3 => ['From Address',
-#            'Replace the &quot;From:&quot; header of the message with &quot;From: fromarg&quot;',
-#            'fromarg'],
-#      4 => ['Digest Options',
-#            'Switches for ezmlm-tstdig(1)',
-#            '-t24 -m30 -k64'],
-      5 => ['List Owner',
-            'The email address of the list owner', 
-            ''],
-#      6 => ['SQL Database',
-#            'SQL database connect information. Requires SQL support',
-#            'host:port:user:password:datab:table'],
-#      7 => ['Message Moderation Path',
-#            'Make /path the path to the database for message moderators, if the list is set up for message moderation',
-#            '/some/full/path'],
-#      8 => ['Subscription Moderation Path',
-#            'Make /path the path to the database for message moderators, if the list is set up for message moderation',
-#            '/some/full/path'],
-#      9 => ['Remote Admin Path',
-#            'Make /path the path to the database for message moderators, if the list is set up for message moderation',
-#            '/some/full/path']
-
-);
-
-# This list defines most of the context sensitive help in ezmlm-web. What
-# isn't defined here is the options, which are defined above ... You can
-# alter these if you feel something else would make more sense to your users
-# Just be careful of what can fit on a screen!
-
-%HELPER = (
-
-   # These should be self explainitory
-   addaddress       => 'You may enter any RFC822 compliant email address here, including the comment part. For example; J Random User <jru@on.web.za>',
-   addaddressfile   => 'or you may enter the filename of a plain text file containing multiple RFC822 email addresses, one per line',
-   moderator        => 'Moderators: people who control who may subscribe or post to a list',
-   deny             => 'Deny: A list of addresses that are _never_ allowed to mail the list',
-   allow            => 'Allow: A list of address that are allowed to mail the list even if the configuration otherwise restricts it',
-   digest           => 'Digest: People who will recieve a digest of all messages on the list',
-   webarch          => 'View the web based archive of this list',
-   config           => 'This lets you alter the way the list is set up',
-   listname         => 'This is the name of the list as displayed on the Select Lists screen. It is also the name of the subdirectory that contains the list',
-   listadd          => 'This is the email address of the list. Note that the defaults come from your qmail config. You should just update the local part (before the @)',
-   webusers         => 'NB! At this stage, any users specified here must exist. User creation may be added in future versions',
-   prefix           => 'Text to add to the subject line of all outgoing messages',
-   headerremove     => 'This is a list of headers to remove from all outgoing mail',
-   headeradd        => 'This is a list of headers to add to all outging mail',
-   mimeremove       => 'All messages whose Content-Type matches these mime types will be bounced back to sender',
-   allowedit        => 'Comma separated list of usernames, or <CODE>ALL</CODE> (all valid users)',
-   mysqlcreate      => 'This will create the necessary MySQL tables if the list configuration above requires it'
-
-);
-
-# This defines the captions of each of the buttons in ezmlm-web, and allows 
-# you to configure them for your own language or taste. Since these are used
-# by the switching algorithm it is important that every button has a unique
-# caption - ie we can't have two 'Edit' buttons doing different things.
-
-%BUTTON = (
-   
-   # These MUST all be unique!
-   create                => 'Create',
-   createlist            => 'Create List',
-   edit                  => 'Edit',
-   delete                => 'Delete',
-   deleteaddress         => 'Delete Address',
-   addaddress            => 'Add Address',
-   moderators            => 'Moderators',
-   denylist              => 'Deny List',
-   allowlist             => 'Allow List',
-   digestsubscribers     => 'Digest Subscribers',
-   configuration         => 'Configuration',
-   yes                   => 'Yes',
-   no                    => 'No',
-   updateconfiguration   => 'Update Configuration',
-   edittexts             => 'Edit Texts',
-   editfile              => 'Edit File',
-   savefile              => 'Save File',
-   webarchive            => 'Web Archive',
-   selectlist            => 'Select List',
-   subscribers           => 'Subscribers',
-   cancel                => 'Cancel',
-   resetform             => 'Reset Form',
-
-);
-
-# This defines the fixed text strings that are used in ezmlm-web. By editing
-# these along with the button labels and help texts, you can convert ezmlm-web
-# to another language :-) If anyone gets arround to doing complete templates
-# for other languages I would appreciate a copy so that I can include it in
-# future releases of ezmlm-web.
-
-%LANGUAGE = (
-   nop                   => 'Action not yet implemented',
-#   chooselistinfo        => "<UL><LI>Choose a mailing list from the selection box or click on [$BUTTON{'create'}].<LI>Click on the [$BUTTON{'edit'}] button if you want to edit the selected list.<LI>Click on the [$BUTTON{'delete'}] button if you want to delete the selected list.</UL>",
-   chooselistinfo        => "<UL><LI>Choose a mailing list from the selection box and click on the [$BUTTON{'edit'}] button to edit the selected list.</LI></UL>",
-   confirmdelete         => 'Confirm deletion of', # list name
-   subscribersto         => 'Subscribers to', # list name
-   subscribers           => 'subscribers',
-   additionalparts       => 'Additional list parts',
-   posting               => 'Posting',
-   subscription          => 'Subscription',
-   remoteadmin           => 'Remote Admin',
-   for                   => 'for', # as in; moderators for blahlist
-   createnew             => 'Create a New List',
-   listname              => 'List Name',
-   listaddress           => 'List Address',
-   listoptions           => 'List Options',
-   allowedtoedit         => 'Users allowed to edit this list',
-   editconfiguration     => 'Edit the List Configuration',
-   prefix                => 'Subject prefix for outgoing messages',
-   headerremove          => 'Headers to strip from all outgoing mail',
-   headeradd             => 'Headers to add to all outgoing mail',
-   mimeremove            =>   'Mime types to strip from all outgoing mail',
-   edittextinfo          => "The box on the left contains a list of files available in the<BR>DIR/text directory. These files are sent out in response to specfic user request, or as part of all outgoing messages<P>To edit a file, select its name from the box. Then click on the [$BUTTON{'editfile'}] button.<P>Press [$BUTTON{'cancel'}] when you have finished editing.",
-   editingfile           => 'Editing File',
-   editfileinfo          => '<BIG><STRONG>ezmlm-manage</STRONG></BIG><BR><TT><STRONG>&lt;#l#&gt;</STRONG></TT> The list name<BR><TT><STRONG>&lt;#A#&gt;</STRONG></TT> The subscription address<BR><TT><STRONG>&lt;#R#&gt;</STRONG></TT> The address a subscriber must reply to<P><BIG><STRONG>ezmlm-store</STRONG></BIG><BR><TT><STRONG>&lt;#l#&gt;</STRONG></TT> The list name<BR><TT><STRONG>&lt;#A#&gt;</STRONG></TT> The acceptance address<BR><TT><STRONG>&lt;#R#&gt;</STRONG></TT> The rejection address</UL>',
-   mysqlcreate           => 'Create the MySQL database tables if necessary',
+# Which interface type should be displayed by default?
+# available values are: easy, normal and expert
+EOF
 
-);
+my $interface=$ezmlm->{interface} || 'normal';
+$OUT .= "\$DEFAULT_INTERFACE_TYPE = '$interface';"
 
-#                      === Configuration file ends ===
+$OUT .= <<'EOF';
+
+# exclude some interface options from being displayed
+# BEWARE: this does not protect the specific option from being changed.
+# It just hides the visible interface items. Anyone can still craft a manual
+# http request, that could change the specified options.
+# See the list of filenames below $TEMPLATE_DIR/config_options/. The
+# blacklist may contain any of these filenames (without '.cs' extension).
+#$INTERFACE_OPTIONS_BLACKLIST = ('lang_select', 'mime_reject');
+
+# use a cascading style sheet (css)
+# the setting is interpreted as a URL
+# this setting was formerly known as "HTML_CSS_FILE"
+$HTML_CSS_COMMON = "/ezmlm-web/default.css";
+
+# choose a coloring scheme - the available files are:
+#    color-blue-gray:   default style used before v3.2
+#    color-red-blue:    use gradients instead of plain colors (since v3.2)
+#
+# be aware, that some stylesheets may require additional graphic
+# files in the same directory
+$HTML_CSS_COLOR = "/ezmlm-web/color-red-blue.css";
+
+# the default interface language
+# all other available translation are available via the web interface
+# the configured preferred browser language of a user can override this
+# setting individually
+$HTML_LANGUAGE = "en";
 
+# enabled support for encrypted mailing lists - defaults to 0 (off).
+# This include keyring management and mailing list handling in general.
 EOF
 
+my $encryption= ($ezmlm->{encryption} eq 'enabled' )? 1 : 0;
+$OUT .="\$ENCRYPTION_SUPPORT = $encryption;";
+
+$OUT .= <<'EOF';
+# Define the default location of gnupg keyrings used for mailing list
+# encryption. If the location starts with a slash ('/'), then it is considered
+# to be an absolute path. Otherwise it is relative to the current list
+# directory. For the ezmlm-gpg mailing list encryption system, the default
+# (".gnupg") is usable.
+$GPG_KEYRING_DEFAULT_LOCATION = ".gnupg";
+
+# Prints Error/Warning messages instead of "Internal Server Error" page.
+# It's recommend to disable (set to 0) in production mode..
+# 0 = disabled
+# 1 = enabled
+# defaults to 0
+EOF
+
+my $debug= ($ezmlm->{debug} eq 'enabled' )? 1 : 0;
+$OUT .="\$DEBUG = $debug;";
+
 }