/[smecontribs]/rpms/smeserver-freepbx/contribs9/smeserver-freepbx-0.1-full_dahdi_support.patch
ViewVC logotype

Annotation of /rpms/smeserver-freepbx/contribs9/smeserver-freepbx-0.1-full_dahdi_support.patch

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph


Revision 1.1 - (hide annotations) (download)
Fri May 6 07:58:15 2016 UTC (8 years, 5 months ago) by unnilennium
Branch: MAIN
CVS Tags: smeserver-freepbx-0_1-46_el6_sme, smeserver-freepbx-0_1-45_el6_sme, smeserver-freepbx-0_1-40_el6_sme, smeserver-freepbx-0_1-44_el6_sme, smeserver-freepbx-0_1-36_el6_sme, smeserver-freepbx-0_1-42_el6_sme, smeserver-freepbx-0_1-41_el6_sme, smeserver-freepbx-0_1-35_el6_sme, smeserver-freepbx-0_1-43_el6_sme, smeserver-freepbx-0_1-38_el6_sme, smeserver-freepbx-0_1-47_el6_sme, smeserver-freepbx-0_1-37_el6_sme, smeserver-freepbx-0_1-34_el6_sme, smeserver-freepbx-0_1-39_el6_sme
Initial import

1 unnilennium 1.1 diff -Nur -x '*.orig' -x '*.rej' smeserver-freepbx-0.1/createlinks mezzanine_patched_smeserver-freepbx-0.1/createlinks
2     --- smeserver-freepbx-0.1/createlinks 2009-02-12 00:22:09.000000000 +0100
3     +++ mezzanine_patched_smeserver-freepbx-0.1/createlinks 2009-02-12 00:20:26.000000000 +0100
4     @@ -14,10 +14,10 @@
5     service_link_enhanced("httpd-fpbx", "K15", "0");
6     service_link_enhanced("httpd-fpbx", "K15", "1");
7    
8     -service_link_enhanced("zaptel", "S09", "7");
9     -service_link_enhanced("zaptel", "K16", "6");
10     -service_link_enhanced("zaptel", "K16", "0");
11     -service_link_enhanced("zaptel", "K16", "1");
12     +service_link_enhanced("dahdi", "S09", "7");
13     +service_link_enhanced("dahdi", "K16", "6");
14     +service_link_enhanced("dahdi", "K16", "0");
15     +service_link_enhanced("dahdi", "K16", "1");
16    
17     safe_symlink("../daemontools" , 'root/etc/rc.d/init.d/supervise/httpd-fpbx');
18     safe_symlink("/var/service/httpd-fpbx" , 'root/service/httpd-fpbx');
19     diff -Nur -x '*.orig' -x '*.rej' smeserver-freepbx-0.1/root/etc/e-smith/db/configuration/defaults/dahdi/status mezzanine_patched_smeserver-freepbx-0.1/root/etc/e-smith/db/configuration/defaults/dahdi/status
20     --- smeserver-freepbx-0.1/root/etc/e-smith/db/configuration/defaults/dahdi/status 1970-01-01 01:00:00.000000000 +0100
21     +++ mezzanine_patched_smeserver-freepbx-0.1/root/etc/e-smith/db/configuration/defaults/dahdi/status 2008-09-20 14:06:51.000000000 +0200
22     @@ -0,0 +1 @@
23     +enabled
24     diff -Nur -x '*.orig' -x '*.rej' smeserver-freepbx-0.1/root/etc/e-smith/db/configuration/defaults/dahdi/type mezzanine_patched_smeserver-freepbx-0.1/root/etc/e-smith/db/configuration/defaults/dahdi/type
25     --- smeserver-freepbx-0.1/root/etc/e-smith/db/configuration/defaults/dahdi/type 1970-01-01 01:00:00.000000000 +0100
26     +++ mezzanine_patched_smeserver-freepbx-0.1/root/etc/e-smith/db/configuration/defaults/dahdi/type 2008-09-20 14:06:43.000000000 +0200
27     @@ -0,0 +1 @@
28     +service
29     diff -Nur -x '*.orig' -x '*.rej' smeserver-freepbx-0.1/root/etc/e-smith/db/configuration/defaults/zaptel/status mezzanine_patched_smeserver-freepbx-0.1/root/etc/e-smith/db/configuration/defaults/zaptel/status
30     --- smeserver-freepbx-0.1/root/etc/e-smith/db/configuration/defaults/zaptel/status 2008-09-20 14:06:51.000000000 +0200
31     +++ mezzanine_patched_smeserver-freepbx-0.1/root/etc/e-smith/db/configuration/defaults/zaptel/status 1970-01-01 01:00:00.000000000 +0100
32     @@ -1 +0,0 @@
33     -enabled
34     diff -Nur -x '*.orig' -x '*.rej' smeserver-freepbx-0.1/root/etc/e-smith/db/configuration/defaults/zaptel/type mezzanine_patched_smeserver-freepbx-0.1/root/etc/e-smith/db/configuration/defaults/zaptel/type
35     --- smeserver-freepbx-0.1/root/etc/e-smith/db/configuration/defaults/zaptel/type 2008-09-20 14:06:43.000000000 +0200
36     +++ mezzanine_patched_smeserver-freepbx-0.1/root/etc/e-smith/db/configuration/defaults/zaptel/type 1970-01-01 01:00:00.000000000 +0100
37     @@ -1 +0,0 @@
38     -service
39     diff -Nur -x '*.orig' -x '*.rej' smeserver-freepbx-0.1/root/usr/share/freepbx/scripts/uninstall.sh mezzanine_patched_smeserver-freepbx-0.1/root/usr/share/freepbx/scripts/uninstall.sh
40     --- smeserver-freepbx-0.1/root/usr/share/freepbx/scripts/uninstall.sh 2008-08-13 13:22:56.000000000 +0200
41     +++ mezzanine_patched_smeserver-freepbx-0.1/root/usr/share/freepbx/scripts/uninstall.sh 2009-02-12 00:19:52.000000000 +0100
42     @@ -8,7 +8,7 @@
43     echo "This script will remove from your server:"
44     echo " - freepbx and asterisk cdr MySQL databases"
45     echo " - freepbx MySQL User"
46     -echo " - freepbx DB entries (freepbx, httpd-fpbx and zaptel)"
47     +echo " - freepbx DB entries (freepbx, httpd-fpbx and dahdi)"
48     echo " - /opt/freepbx"
49     echo ""
50     echo -n "Are you sure you want to remove FreePBX permanently ? (y/n) [n] "
51     @@ -26,7 +26,7 @@
52     echo "Removing SME DB entries..."
53     /sbin/e-smith/db configuration delete freepbx
54     /sbin/e-smith/db configuration delete httpd-fpbx
55     - /sbin/e-smith/db configuration delete zaptel
56     + /sbin/e-smith/db configuration delete dahdi
57     echo "Removing /opt/freepbx ..."
58     rm -rf /opt/freepbx
59     echo "Removing this script ..."
60     diff -Nur -x '*.orig' -x '*.rej' smeserver-freepbx-0.1/root/var/lib/asterisk/bin/genzaptelconf mezzanine_patched_smeserver-freepbx-0.1/root/var/lib/asterisk/bin/genzaptelconf
61     --- smeserver-freepbx-0.1/root/var/lib/asterisk/bin/genzaptelconf 2009-02-12 00:22:09.000000000 +0100
62     +++ mezzanine_patched_smeserver-freepbx-0.1/root/var/lib/asterisk/bin/genzaptelconf 1970-01-01 01:00:00.000000000 +0100
63     @@ -1,570 +0,0 @@
64     -#! /bin/bash
65     -
66     -# genzaptelconf: generate as smartly as you can:
67     -# /etc/zaptel.conf
68     -# /etc/asterisk/zapata-channels.conf (to be #include-d into zapata.conf)
69     -# update:
70     -# /etc/default/zaptel (list of modules to load)
71     -#
72     -# $Id:$
73     -#
74     -
75     -# The script uses a number of bash-specific features
76     -# TODO: either ditch them or convert to perl
77     -
78     -# /etc/default/zaptel may override the following variables
79     -lc_country=us
80     -#method=ls
81     -#method=ks
82     -base_exten=6000
83     -
84     -
85     -ZAPCONF_FILE=/etc/zaptel.conf
86     -ZAPATA_FILE=/etc/asterisk/zapata-auto.conf
87     -ZAPTEL_BOOT=/etc/sysconfig/zaptel
88     -exten_base_dir=/etc/asterisk/extensions-phones.d
89     -exten_defs_file=/etc/asterisk/extensions-defs.conf
90     -ztcfg_cmd=ztcfg
91     -
92     -# a temporary directory. Created when the switch -r is parsed on getopts
93     -# and deleted in the end on update_extensions_defs
94     -tmp_dir=
95     -
96     -# read default configuration from /etc/default/zaptel
97     -if [ -r $ZAPTEL_BOOT ]; then . $ZAPTEL_BOOT; fi
98     -
99     -# work around a bug (that was already fixed) in the installer:
100     -if [ "$lc_country" = '' ]; then lc_country=us; fi
101     -
102     -ALL_MODULES="wctdm wcfxo wcfxs pciradio tor2 torisa wct1xxp wct4xxp wcte11xp wcusb ztd_eth ztdummy"
103     -force_stop_ast=yes
104     -do_detect=no
105     -do_unload=no
106     -verbose=no
107     -rapid_extens=''
108     -# global: current extension number in extensions list. Should only be
109     -# changed in print_pattern:
110     -rapid_cur_exten=1
111     -# set the TRUNK in extensidialplan dialplan defs file rapid_conf_mode=no
112     -
113     -die() {
114     - echo "$@" >&2
115     - exit 1
116     -}
117     -
118     -say() {
119     - if [ "$verbose" = no ]; then
120     - return
121     - fi
122     - echo "$@" >&2
123     -}
124     -
125     -run_ztcfg() {
126     - if [ "$verbose" = no ]; then
127     - $ztcfg_cmd "$@"
128     - else
129     - say "Reconfiguring identified channels"
130     - $ztcfg_cmd -vv "$@"
131     - fi
132     -}
133     -
134     -do_update() {
135     - sed -i.bak "s/^$1=.*\$/$1=\"$2\"/" ${ZAPTEL_BOOT}
136     - if ! grep -q "^$1=" ${ZAPTEL_BOOT}; then
137     - echo "$1=\"$2\"" >> ${ZAPTEL_BOOT}
138     - fi
139     -}
140     -
141     -update_extensions_defs() {
142     - if [ "$rapid_conf_mode" = 'yes' ]
143     - then
144     - say "DEBUG: Updating dialplan defs file $exten_defs_file"
145     - if [ "`echo $tmp_dir/fxo_* | grep -v '*'`" != '' ]
146     - then
147     - trunk_nums=`cat $tmp_dir/fxo_* | sort -n | xargs`
148     - say "Configuring TRUNK to be [first of] zaptel channels: $trunk_nums"
149     - trunk_dev=`echo $trunk_nums| sed -e 's/ /\\\\\\&/g' -e 's/[0-9a-zA-Z]\+/Zap\\\\\\/&/g'`
150     - echo >&2 sed -i "s/^TRUNK.*=>.*/TRUNK => $trunk_dev/" $exten_defs_file
151     - sed -i "s/^TRUNK.*=>.*/TRUNK => $trunk_dev/" $exten_defs_file
152     - if ! grep -q "^TRUNK =>" $exten_defs_file; then
153     - trunk_dev=`echo $trunk_nums| sed -e 's/ /&/g' -e 's/[0-9a-zA-Z]*/Zap\\/&/g'`
154     - echo "TRUNK => $trunk_dev" >> $exten_defs_file
155     - fi
156     - else
157     - say "Warning: No FXO channel for trunk. Moving on."
158     - fi
159     - if [ "`echo $tmp_dir/fxs_* | grep -v '*'`" != '' ]
160     - then
161     - fxs_nums=`cat $tmp_dir/fxs_* | sort -n | xargs`
162     - zap_nums=`grep '^[^;].*Zap/\${CHAN_ZAP_' $exten_base_dir/*.conf | \
163     - sed -e 's/.*Zap\/\${CHAN_ZAP_\([0-9]*\)}.*/\1/' | sort -u | xargs`
164     - say "Configuring channels: $fxs_nums as channel placeholders: $zap_nums"
165     - j=1
166     - for i in $zap_nums
167     - do
168     - chan=`echo $fxs_nums | awk "{print \\$$i}"`
169     - if [ "$chan" = '' ]
170     - then
171     - # if the result is empty, we probably got past the last one.
172     - # bail out.
173     - say "Warning: No FXS channel for CHAN_ZAP_$i. Moving on"
174     - break
175     - fi
176     - say "DEBUG: setting channel $chan to placeholder $i"
177     - if grep -q "^CHAN_ZAP_$i " $exten_defs_file
178     - then
179     - sed -i -e "s/^CHAN_ZAP_$i .*/CHAN_ZAP_$i => Zap\/$chan/" $exten_defs_file
180     - else
181     - echo "CHAN_ZAP_$i => Zap/$chan" >> $exten_defs_file
182     - fi
183     - done
184     - fi
185     - # cleaning up the temp dir
186     - if [ -d "$tmp_dir" ]; then rm -rf "$tmp_dir"; fi
187     - fi
188     -}
189     -
190     -usage() {
191     - program=`basename $0`
192     -
193     - echo >&2 "$program: generate zaptel.conf"
194     - echo >&2 "usage:"
195     - echo >&2 " $program [-v] [-m k|l|g] [-c <country_code>] [-r |-e <base_exten>] "
196     - echo >&2 " $program [-v] -l"
197     - echo >&2 " $program -u"
198     - echo >&2 " $program -h (this screen)"
199     - echo >&2 ""
200     - echo >&2 "Options:"
201     - echo >&2 " -c CODE: set the country code (default: $lc_country)"
202     - echo >&2 " -e NUM: set the base extension number (default: $base_exten)"
203     - echo >&2 " -m: set signalling method (gs/ks/ls, default: $method)"
204     - echo >&2 " -l: output a list of detected channels instead of zaptel.conf"
205     - echo >&2 " -u: Unload zaptel modules"
206     - echo >&2 " -v: verbose"
207     - echo >&2 " -r: rapid configuration mode: configure Zaptel FXS channels from "
208     - echo >&2 " existing Rapid extension files. FXOs will all be TRUNK "
209     -}
210     -
211     -# $1: channel number
212     -print_pattern() {
213     - local chan=$1
214     - local sig=$2 #fxs/fxo
215     - local mode=$3
216     - case "$mode" in
217     - zaptel) echo "${sig}$method=$chan" ;;
218     - list) echo $chan $sig;;
219     - zapata)
220     - echo "signalling=${sig}_$method"
221     - if [ "$sig" = 'fxo' ]
222     - then
223     - echo "; Note: this is an extension. Create a ZAP extension in AMP for Channel $chan"
224     - echo "context=from-internal"
225     - echo "group=1"
226     - # to preconfigure channel 1's extension to 550, set
227     - # chan_1_exten=550
228     - # in, e.g, /etc/default/zaptel
229     - var_name=`echo chan_${chan}_exten`
230     - cfg_exten=`echo ${!var_name} | tr -d -c 0-9`
231     - var_name=`echo chan_${chan}_vmbox`
232     - cfg_vmbox=`echo ${!var_name} | tr -d -c 0-9`
233     - var_name=`echo chan_${chan}_cntxt`
234     - cfg_cntxt=`echo ${!var_name} | tr -d -c 0-9`
235     -
236     - # if option -E was given, get configuration from current extension
237     - if [ "$rapid_conf_mode" = 'yes' ]
238     - then
239     - rap_exten=`echo $rapid_extens |awk "{print \\$$rapid_cur_exten}"`
240     - if [ "$rap_exten" != '' ]
241     - then
242     - rap_cfgfile="$exten_base_dir/$rap_exten.conf"
243     - if [ -r "$rap_exten" ]
244     - then
245     - cfg_exten=$rap_exten
246     - # the vmbox is the third parameter to stdexten
247     - rap_vmbox=`grep '^[^;].*Macro(stdexten' $rap_exten | cut -d, -f3 \
248     - | cut -d')' -f1 | tr -d -c '0-9@a-zA-Z'`
249     - if [ "$rap_vmbox" ]!= '' ; then cfg_vmbox=$rap_vmbox; fi
250     - fi
251     - fi
252     - rapid_cur_exten=$(($rapid_cur_exten + 1))
253     - fi
254     -
255     - if [ "$cfg_exten" = '' ]
256     - then # No extension number set for this channel
257     - exten=$(($chan+$base_exten))
258     - else # use the pre-configured extension number
259     - exten=$cfg_exten
260     - fi
261     - # is there any real need to set 'mailbox=' ?
262     - if [ "x$cfg_vmbox" = x ]
263     - then # No extension number set for this channel
264     - vmbox=$exten
265     - else # use the pre-configured extension number
266     - vmbox=$cfg_vmbox
267     - fi
268     - # echo "callerid=\"Channel $chan\" <$exten>"
269     - # echo "mailbox=$exten"
270     - else # we have may have set it. So reset it:
271     - echo "; Note: this is a trunk. Create a ZAP trunk in AMP for Channel $chan"
272     - echo "context=from-zaptel"
273     - echo "group=0"
274     - # echo "callerid=\"\" <0>"
275     - # echo "mailbox="
276     - fi
277     -
278     - echo "channel => $chan"
279     - echo ""
280     -
281     - # Keep a note of what channels we have identified
282     - say "DEBUG: adding to channels list: channel: $chan, sig: $sig"
283     - case "$sig" in
284     - fxs)
285     - echo $chan >$tmp_dir/fxo_$chan
286     - say "DEBUG: FXO list now contains: `cat $tmp_dir/fxo_* |xargs`"
287     - ;;
288     - fxo)
289     - echo $chan >$tmp_dir/fxs_$chan
290     - say "DEBUG: FXS list now contains: `cat $tmp_dir/fxs_* |xargs`"
291     - ;;
292     - esac
293     - ;;
294     - esac
295     -
296     -}
297     -
298     -# the number of channels from /proc/zaptel
299     -# must always print a number as its output.
300     -count_proc_zap_lines() {
301     - # if zaptel is not loaded there are 0 channels:
302     - if [ ! -d /proc/zaptel ]; then echo '0'; return; fi
303     -
304     - (
305     - for file in `echo /proc/zaptel/* |grep -v '\*'`
306     - do sed -e 1,2d $file # remove the two header lines
307     - done
308     - ) | wc -l # the total number of lines
309     -}
310     -
311     -load_modules() {
312     - say "Test Loading modules:"
313     - for i in zaptel $ALL_MODULES
314     - do
315     - if [ "$i" = ztdummy ]; then
316     - continue # No hardware to detect
317     - fi
318     - lines_before=`count_proc_zap_lines`
319     - args="${i}_args"
320     - eval "args=\$$args"
321     - # a module is worth listing if it:
322     - # a. loaded successfully, and
323     - # b. added channels lines under /proc/zaptel/*
324     - if /sbin/modprobe $i $args 2> /dev/null && \
325     - [ $lines_before -lt `count_proc_zap_lines` ]
326     - then
327     - probed_modules="$probed_modules $i"
328     - say " ok $i $args"
329     - else
330     - say " - $i $args"
331     - fi
332     - done
333     -}
334     -
335     -
336     -unload_modules() {
337     - if
338     - pids="$(pgrep asterisk)"
339     - [ "$pids" != '' ]
340     - then
341     - die "Before unloading -- STOP asterisk (pids=$pids)."
342     - fi
343     - say "Unloading zaptel modules:"
344     - modlist=''
345     - for i in $ALL_MODULES zaptel
346     - do
347     - if lsmod | grep "^$i *" > /dev/null; then
348     - modlist="$modlist $i"
349     - say -n "$i "
350     - fi
351     - done
352     - /sbin/modprobe -r $modlist
353     - say ''
354     -}
355     -
356     -detect() {
357     - unload_modules
358     - load_modules
359     - modlist="$probed_modules"
360     - #for i in $ALL_MODULES
361     - #do
362     - # if lsmod | grep "^$i *" > /dev/null; then
363     - # modlist="$modlist $i"
364     - # fi
365     - #done
366     - modlist="$(echo $modlist)" # clean spaces
367     - if [ "$modlist" = '' ]; then
368     - modlist=ztdummy # Fallback
369     - fi
370     - say "Updating '${ZAPTEL_BOOT}'"
371     - do_update ZAPTEL_MODS "$modlist"
372     -}
373     -
374     -check_tdm_sigtype() {
375     - chan_num=$1
376     - sig_type=$2
377     - mode=$3
378     -
379     - case "$sig_type" in
380     - fxs)chan_sig_type=fxo;;
381     - fxo)chan_sig_type=fxs;;
382     - esac
383     -
384     -# print_pattern $chan_num $chan_sig_type $mode
385     -
386     - $ztcfg_cmd -c <(print_pattern $chan_num $chan_sig_type zaptel) 2>/dev/null \
387     - || return 1
388     - if head -c1 /dev/zap/$chan_num >/dev/null 2>/dev/null
389     - then
390     - print_pattern $chan_num $chan_sig_type $mode
391     - return 0
392     - else
393     - return 1
394     - fi
395     -}
396     -
397     -# output a list of extensions that need a channel
398     -get_rapid_extens() {
399     - if [ "$rapid_conf_mode" = 'yes' ]
400     - then
401     - rapid_extens=`grep -l '^[^;].*Zap/\${CHAN_ZAP_' $exten_base_dir/*.conf 2>/dev/null | \
402     - rev | cut -d/ -f1 | cut -d. -f2- | rev | xargs`
403     - say "Need to configure extensions: $rapid_extens"
404     - fi
405     -}
406     -
407     -genconf() {
408     - local mode=$1
409     -
410     - # reset FXO list (global)
411     - say "DEBUG: resetting channels lists"
412     - rm -f $tmp_dir/fx{s,o}_*
413     -
414     - if [ "$mode" = 'zapata' ]
415     - then
416     - rem_char=';'
417     - else
418     - rem_char='#'
419     - fi
420     -
421     - spanlist=`echo /proc/zaptel/* | grep -v '\*'`
422     -
423     - #if [ "$spanlist" == "" ]; then
424     - # die "No zapata interfaces in /proc/zaptel"
425     - #fi
426     -
427     -
428     - case "$mode" in
429     - zaptel)
430     - cat <<EOF
431     -# Autogenerated by $0 -- do not hand edit
432     -# Zaptel Configuration File
433     -#
434     -# This file is parsed by the Zaptel Configurator, ztcfg
435     -#
436     -
437     -# It must be in the module loading order
438     -
439     -EOF
440     - ;;
441     - zapata)
442     - cat <<EOF
443     -; Autogenerated by $0 -- do not hand edit
444     -; Zaptel Channels Configurations (zapata.conf)
445     -;
446     -; This is not intended to be a complete zapata.conf. Rather, it is intended
447     -; to be #include-d by /etc/zapata.conf that will include the global settings
448     -;
449     -callerid=asreceived
450     -EOF
451     - ;;
452     - esac
453     -
454     - # For each line in the spanlist: see if it represents a channel.
455     - # if it does, test that the channel is usable.
456     - # we do that by configuring it (using ztcfg with a 1-line config file)
457     - # and then trying to read 1 byte from the device file.
458     - #
459     - # The '<(command)' syntax creates a temporary file whose content is is the
460     - # output of 'command'.
461     - #
462     - # This approach failed with the T1 card we have: the read operation simply
463     - # hung.
464     - #
465     - # Another problem with such an approach is how to include an existing
466     - # configuration file. For instance: how to include some default settings.
467     - #
468     - # Maybe an 'include' directive should be added to zaptel.conf ?
469     - #cat $spanlist |
470     - for procfile in $spanlist
471     - do
472     - # the first line is the title line. It states the model name
473     - # the second line is empty
474     - title=`head -n 1 $procfile`
475     - echo ""
476     - echo "$rem_char $title"
477     -
478     - # The rest of the lines are per-channel lines
479     - sed -e 1,2d $procfile | \
480     - while read line
481     - do
482     - # in case this is a real channel.
483     - chan_num=`echo $line |awk '{print $1}'`
484     - case "$line" in
485     - *WCT1/*) # we're yet to detect when a channel is active
486     - echo "$rem_char channel $chan_num, WCT1, unhandled for now"
487     - ;;
488     - *WCTDM/*)
489     - # this can be either FXS or FXO
490     - check_tdm_sigtype $chan_num fxs $mode || \
491     - check_tdm_sigtype $chan_num fxo $mode || \
492     - echo "$rem_char channel $chan_num, WCTDM, inactive."
493     - ;;
494     - *WRTDM/*)
495     - # this can be either FXS or FXO
496     - check_tdm_sigtype $chan_num fxs $mode || \
497     - check_tdm_sigtype $chan_num fxo $mode || \
498     - echo "$rem_char channel $chan_num, WRTDM, inactive."
499     - ;;
500     - *WCFXO/*)
501     - check_tdm_sigtype $chan_num fxo $mode || \
502     - echo "$rem_char channel $chan_num, WCFXO, inactive."
503     - ;;
504     - '') ;; # Empty line (after span header)
505     - *) echo "$rem_char ??: $line";;
506     - esac
507     - done
508     - done
509     -
510     - if [ "$mode" = 'zaptel' ]
511     - then
512     - cat <<EOF
513     -
514     -# Global data
515     -
516     -EOF
517     - echo "loadzone = $loadzone"
518     - echo "defaultzone = $defaultzone"
519     - fi
520     -
521     - if [ "$mode" = 'zapata' ]
522     - then
523     - update_extensions_defs
524     - fi
525     -}
526     -
527     -while getopts 'c:de:E:hlm:rsuv' arg
528     -do
529     - case "$arg" in
530     - e) # guarantee that it is a number:
531     - new_base_exten=`echo $OPTARG | tr -d -c 0-9`
532     - if [ "x$new_base_exten" != x ]; then base_exten=$new_base_exten; fi
533     - ;;
534     - c) lc_country=`echo $OPTARG | tr -d -c a-z` ;;
535     - u) do_unload=yes ;;
536     - v) verbose=yes ;;
537     - l) mode='list' ;;
538     - m)
539     - case "$OPTARG" in
540     - k|l|g)method=${OPTARG}s ;;
541     - *) echo >&2 "unknown signalling method ${OPTARG}s, defaulting to \"$method\"";;
542     - esac
543     - ;;
544     - r)
545     - rapid_conf_mode=yes
546     - tmp_dir=`mktemp -d` || die "$0: failed to create temporary directory. Aborting"
547     - ;;
548     - *) echo >&2 "unknown parameter -$arg, Aborting"; usage; exit 1;;
549     - esac
550     -done
551     -shift $(( $OPTIND-1 ))
552     -if [ $# != 0 ]; then
553     - echo >&2 "$0: too many parameters"
554     - usage
555     - exit 1
556     -fi
557     -
558     -case "$lc_country" in
559     - # the list was generated from the source of zaptel:
560     - #grep '{.*[0-9]\+,.*"[a-z][a-z]"' zonedata.c | cut -d'"' -f 2 | xargs |tr ' ' '|'
561     - us|au|fr|nl|uk|fi|es|jp|no|at|nz|it|gr|tw|cl|se|be|il)
562     - :;;
563     -*)
564     - lc_country=us
565     - echo >&2 "unknown country-code $lc_country, defaulting to \"us\"";;
566     -esac
567     -# any reason for loadzone and defaultzone to be different? If so, this is
568     -# the place to make that difference
569     -loadzone=$lc_country
570     -defaultzone=$loadzone
571     -
572     -# Choose reasonable default for signaling method (by country)
573     -if [ "" = "$method" ]; then
574     - case "$lc_country" in
575     - il) method=ls ;;
576     - *) method=ks ;;
577     - esac
578     -fi
579     -
580     -# make sure asterisk is not in our way
581     -if [ "$force_stop_ast" = 'yes' ]
582     -then
583     -# /etc/init.d/asterisk stop 1>&2
584     - /usr/sbin/amportal stop 1>&2
585     -else
586     - if ps auxww |grep asterisk | grep -v -- -r | grep -q -v grep
587     - then
588     - echo >&2 "Asterisk is already running. Configuration left untouched"
589     - echo >&2 "You can use the option -s to shut down Asterisk for the"
590     - echo >&2 "duration of the detection."
591     - exit 1
592     - fi
593     -fi
594     -
595     -if [ "$do_unload" = yes ]
596     -then
597     - unload_modules
598     - exit
599     -fi
600     -
601     -if [ "$do_detect" = yes ]
602     -then
603     - detect
604     -fi
605     -
606     -if [ "$mode" = list ]; then
607     - genconf list
608     -else
609     - get_rapid_extens
610     - echo "Generating '${ZAPCONF_FILE}'"
611     - mv "${ZAPCONF_FILE}" "${ZAPCONF_FILE}.bak"
612     - genconf zaptel > "${ZAPCONF_FILE}"
613     - echo "Generating '${ZAPATA_FILE}'"
614     - mv "${ZAPATA_FILE}" "${ZAPATA_FILE}.bak"
615     - genconf zapata > "${ZAPATA_FILE}"
616     - run_ztcfg
617     -fi
618     -
619     -if [ "$force_stop_ast" = 'yes' ]
620     -then
621     -# /etc/init.d/asterisk start 1>&2
622     - /etc/init.d/zaptel stop
623     - /etc/init.d/zaptel start
624     - /usr/sbin/amportal start 1>&2
625     -fi
626     -
627     -# if in verbose mode: verify that asterisk is running
628     -if [ "$verify" != 'no' ]
629     - then
630     - say "Checking channels configured in Asterisk:"
631     - sleep 1 # give it some time. This is enough on our simple test server
632     - /usr/local/sbin/ast-cmd cmd "zap show channels"
633     -fi

admin@koozali.org
ViewVC Help
Powered by ViewVC 1.2.1 RSS 2.0 feed