| 1 |
slords |
1.1 |
--- smeserver-htbwshaper-1.0/root/etc/e-smith/locale/da/etc/e-smith/web/functions/htbwshaper 2009-08-24 08:48:52.000000000 -0600 |
| 2 |
|
|
+++ smeserver-htbwshaper-1.0.update/root/etc/e-smith/locale/da/etc/e-smith/web/functions/htbwshaper 2009-08-24 09:17:13.000000000 -0600 |
| 3 |
|
|
@@ -5,55 +5,55 @@ |
| 4 |
|
|
</entry> |
| 5 |
|
|
<entry> |
| 6 |
|
|
<base>DESC_QOS</base> |
| 7 |
|
|
- <trans>You can manage quality of service on your server. You must define the capacities of the band-width, the various parameters of the VOIP and your servers external interface. The information required on the SIP and RTP protocols are used to ensure a quality of service for telephony IP.</trans> |
| 8 |
|
|
+ <trans>Du kan administrere servicekvalitet(QoS) på din server. Du skal angive størrelserne på båndbredde, de forskellige parametre i VOIP og din servers eksterne interface. Oplysninger om SIP og RTP protokoller bruges til at sikre servicekvaliteten(QoS) for IP-telefoni. </trans> |
| 9 |
|
|
</entry> |
| 10 |
|
|
<entry> |
| 11 |
|
|
<base>DESC_RTP</base> |
| 12 |
|
|
- <trans>To open a port used by the RTP protocol, enter information below</trans> |
| 13 |
|
|
+ <trans>Angiv information nedenfor, for at åbne en port til brug for RTP protokollen</trans> |
| 14 |
|
|
</entry> |
| 15 |
|
|
<entry> |
| 16 |
|
|
<base>DESC_SIP</base> |
| 17 |
|
|
- <trans>Indicate the port used by the SIP protocol</trans> |
| 18 |
|
|
+ <trans>Angiv hvilken port SIP protokollen anvender</trans> |
| 19 |
|
|
</entry> |
| 20 |
|
|
<entry> |
| 21 |
|
|
<base>DESC_INT</base> |
| 22 |
|
|
- <trans>Select the external network interface of your server</trans> |
| 23 |
|
|
+ <trans>Angiv det eksterne netværksgrænseflade på din server</trans> |
| 24 |
|
|
</entry> |
| 25 |
|
|
<entry> |
| 26 |
|
|
<base>DESC_BP</base> |
| 27 |
|
|
- <trans>Enter your band-width speed, and indicate information below</trans> |
| 28 |
|
|
+ <trans>Indtast størrelsen på din båndbredde og angiv oplysninger nedenfor</trans> |
| 29 |
|
|
</entry> |
| 30 |
|
|
<entry> |
| 31 |
|
|
<base>QOS</base> |
| 32 |
|
|
- <trans>Quality of service</trans> |
| 33 |
|
|
+ <trans>Servicekvalitet (QoS)</trans> |
| 34 |
|
|
</entry> |
| 35 |
|
|
<entry> |
| 36 |
|
|
<base>VALUE_INF</base> |
| 37 |
|
|
- <trans>Last port RTP must be higher than the first</trans> |
| 38 |
|
|
+ <trans>Sidste RTP port skal være større end den første</trans> |
| 39 |
|
|
</entry> |
| 40 |
|
|
<entry> |
| 41 |
|
|
<base>LABEL_UPLINK</base> |
| 42 |
|
|
- <trans>Bandwith speed Up (in kbit/s)</trans> |
| 43 |
|
|
+ <trans>Upload båndbredde (i kbit/s)</trans> |
| 44 |
|
|
</entry> |
| 45 |
|
|
<entry> |
| 46 |
|
|
<base>LABEL_DOWNLINK</base> |
| 47 |
|
|
- <trans>Bandwith speed Down (in kbit/s)</trans> |
| 48 |
|
|
+ <trans>Download båndbredde (i kbit/s)</trans> |
| 49 |
|
|
</entry> |
| 50 |
|
|
<entry> |
| 51 |
|
|
<base>LABEL_RTPSTART</base> |
| 52 |
|
|
- <trans>First port used by RTP protocol</trans> |
| 53 |
|
|
+ <trans>Første port som anvendes til RTP protokol</trans> |
| 54 |
|
|
</entry> |
| 55 |
|
|
<entry> |
| 56 |
|
|
<base>LABEL_RTPEND</base> |
| 57 |
|
|
- <trans>Last port used by RTP protocol</trans> |
| 58 |
|
|
+ <trans>Sidste port som anvendes til RTP protokol</trans> |
| 59 |
|
|
</entry> |
| 60 |
|
|
<entry> |
| 61 |
|
|
<base>LABEL_INT</base> |
| 62 |
|
|
- <trans>External network interface of your server</trans> |
| 63 |
|
|
+ <trans>Eksternt netværksgrænseflade på din server</trans> |
| 64 |
|
|
</entry> |
| 65 |
|
|
<entry> |
| 66 |
|
|
<base>LABEL_SIP</base> |
| 67 |
|
|
- <trans>Port used by SIP protocol</trans> |
| 68 |
|
|
+ <trans>Port som bruges af SIP protokol</trans> |
| 69 |
|
|
</entry> |
| 70 |
|
|
|
| 71 |
|
|
</lexicon> |
| 72 |
|
|
--- smeserver-htbwshaper-1.0/root/etc/e-smith/locale/pl/etc/e-smith/web/functions/htbwshaper 1969-12-31 17:00:00.000000000 -0700 |
| 73 |
|
|
+++ smeserver-htbwshaper-1.0.update/root/etc/e-smith/locale/pl/etc/e-smith/web/functions/htbwshaper 2009-08-24 09:17:15.000000000 -0600 |
| 74 |
|
|
@@ -0,0 +1,59 @@ |
| 75 |
|
|
+<lexicon lang="pl"> |
| 76 |
|
|
+ <entry> |
| 77 |
|
|
+ <base>FORM_TITLE</base> |
| 78 |
|
|
+ <trans>Configure quality of service</trans> |
| 79 |
|
|
+ </entry> |
| 80 |
|
|
+ <entry> |
| 81 |
|
|
+ <base>DESC_QOS</base> |
| 82 |
|
|
+ <trans>You can manage quality of service on your server. You must define the capacities of the band-width, the various parameters of the VOIP and your servers external interface. The information required on the SIP and RTP protocols are used to ensure a quality of service for telephony IP.</trans> |
| 83 |
|
|
+ </entry> |
| 84 |
|
|
+ <entry> |
| 85 |
|
|
+ <base>DESC_RTP</base> |
| 86 |
|
|
+ <trans>To open a port used by the RTP protocol, enter information below</trans> |
| 87 |
|
|
+ </entry> |
| 88 |
|
|
+ <entry> |
| 89 |
|
|
+ <base>DESC_SIP</base> |
| 90 |
|
|
+ <trans>Indicate the port used by the SIP protocol</trans> |
| 91 |
|
|
+ </entry> |
| 92 |
|
|
+ <entry> |
| 93 |
|
|
+ <base>DESC_INT</base> |
| 94 |
|
|
+ <trans>Select the external network interface of your server</trans> |
| 95 |
|
|
+ </entry> |
| 96 |
|
|
+ <entry> |
| 97 |
|
|
+ <base>DESC_BP</base> |
| 98 |
|
|
+ <trans>Enter your band-width speed, and indicate information below</trans> |
| 99 |
|
|
+ </entry> |
| 100 |
|
|
+ <entry> |
| 101 |
|
|
+ <base>QOS</base> |
| 102 |
|
|
+ <trans>Quality of service</trans> |
| 103 |
|
|
+ </entry> |
| 104 |
|
|
+ <entry> |
| 105 |
|
|
+ <base>VALUE_INF</base> |
| 106 |
|
|
+ <trans>Last port RTP must be higher than the first</trans> |
| 107 |
|
|
+ </entry> |
| 108 |
|
|
+ <entry> |
| 109 |
|
|
+ <base>LABEL_UPLINK</base> |
| 110 |
|
|
+ <trans>Bandwith speed Up (in kbit/s)</trans> |
| 111 |
|
|
+ </entry> |
| 112 |
|
|
+ <entry> |
| 113 |
|
|
+ <base>LABEL_DOWNLINK</base> |
| 114 |
|
|
+ <trans>Bandwith speed Down (in kbit/s)</trans> |
| 115 |
|
|
+ </entry> |
| 116 |
|
|
+ <entry> |
| 117 |
|
|
+ <base>LABEL_RTPSTART</base> |
| 118 |
|
|
+ <trans>First port used by RTP protocol</trans> |
| 119 |
|
|
+ </entry> |
| 120 |
|
|
+ <entry> |
| 121 |
|
|
+ <base>LABEL_RTPEND</base> |
| 122 |
|
|
+ <trans>Last port used by RTP protocol</trans> |
| 123 |
|
|
+ </entry> |
| 124 |
|
|
+ <entry> |
| 125 |
|
|
+ <base>LABEL_INT</base> |
| 126 |
|
|
+ <trans>External network interface of your server</trans> |
| 127 |
|
|
+ </entry> |
| 128 |
|
|
+ <entry> |
| 129 |
|
|
+ <base>LABEL_SIP</base> |
| 130 |
|
|
+ <trans>Port used by SIP protocol</trans> |
| 131 |
|
|
+ </entry> |
| 132 |
|
|
+ |
| 133 |
|
|
+</lexicon> |
| 134 |
|
|
--- smeserver-htbwshaper-1.0/root/etc/e-smith/locale/ro/etc/e-smith/web/functions/htbwshaper 1969-12-31 17:00:00.000000000 -0700 |
| 135 |
|
|
+++ smeserver-htbwshaper-1.0.update/root/etc/e-smith/locale/ro/etc/e-smith/web/functions/htbwshaper 2009-08-24 09:17:16.000000000 -0600 |
| 136 |
|
|
@@ -0,0 +1,59 @@ |
| 137 |
|
|
+<lexicon lang="ro"> |
| 138 |
|
|
+ <entry> |
| 139 |
|
|
+ <base>FORM_TITLE</base> |
| 140 |
|
|
+ <trans>Configure quality of service</trans> |
| 141 |
|
|
+ </entry> |
| 142 |
|
|
+ <entry> |
| 143 |
|
|
+ <base>DESC_QOS</base> |
| 144 |
|
|
+ <trans>You can manage quality of service on your server. You must define the capacities of the band-width, the various parameters of the VOIP and your servers external interface. The information required on the SIP and RTP protocols are used to ensure a quality of service for telephony IP.</trans> |
| 145 |
|
|
+ </entry> |
| 146 |
|
|
+ <entry> |
| 147 |
|
|
+ <base>DESC_RTP</base> |
| 148 |
|
|
+ <trans>To open a port used by the RTP protocol, enter information below</trans> |
| 149 |
|
|
+ </entry> |
| 150 |
|
|
+ <entry> |
| 151 |
|
|
+ <base>DESC_SIP</base> |
| 152 |
|
|
+ <trans>Indicate the port used by the SIP protocol</trans> |
| 153 |
|
|
+ </entry> |
| 154 |
|
|
+ <entry> |
| 155 |
|
|
+ <base>DESC_INT</base> |
| 156 |
|
|
+ <trans>Select the external network interface of your server</trans> |
| 157 |
|
|
+ </entry> |
| 158 |
|
|
+ <entry> |
| 159 |
|
|
+ <base>DESC_BP</base> |
| 160 |
|
|
+ <trans>Enter your band-width speed, and indicate information below</trans> |
| 161 |
|
|
+ </entry> |
| 162 |
|
|
+ <entry> |
| 163 |
|
|
+ <base>QOS</base> |
| 164 |
|
|
+ <trans>Quality of service</trans> |
| 165 |
|
|
+ </entry> |
| 166 |
|
|
+ <entry> |
| 167 |
|
|
+ <base>VALUE_INF</base> |
| 168 |
|
|
+ <trans>Last port RTP must be higher than the first</trans> |
| 169 |
|
|
+ </entry> |
| 170 |
|
|
+ <entry> |
| 171 |
|
|
+ <base>LABEL_UPLINK</base> |
| 172 |
|
|
+ <trans>Bandwith speed Up (in kbit/s)</trans> |
| 173 |
|
|
+ </entry> |
| 174 |
|
|
+ <entry> |
| 175 |
|
|
+ <base>LABEL_DOWNLINK</base> |
| 176 |
|
|
+ <trans>Bandwith speed Down (in kbit/s)</trans> |
| 177 |
|
|
+ </entry> |
| 178 |
|
|
+ <entry> |
| 179 |
|
|
+ <base>LABEL_RTPSTART</base> |
| 180 |
|
|
+ <trans>First port used by RTP protocol</trans> |
| 181 |
|
|
+ </entry> |
| 182 |
|
|
+ <entry> |
| 183 |
|
|
+ <base>LABEL_RTPEND</base> |
| 184 |
|
|
+ <trans>Last port used by RTP protocol</trans> |
| 185 |
|
|
+ </entry> |
| 186 |
|
|
+ <entry> |
| 187 |
|
|
+ <base>LABEL_INT</base> |
| 188 |
|
|
+ <trans>External network interface of your server</trans> |
| 189 |
|
|
+ </entry> |
| 190 |
|
|
+ <entry> |
| 191 |
|
|
+ <base>LABEL_SIP</base> |
| 192 |
|
|
+ <trans>Port used by SIP protocol</trans> |
| 193 |
|
|
+ </entry> |
| 194 |
|
|
+ |
| 195 |
|
|
+</lexicon> |
Parent Directory
| 
Revision Log
| 
Revision Graph
