smeserver-htbwshaper/contribs8/smeserver-htbwshaper-1.0-locale-2009-08-24.patch

--- smeserver-htbwshaper-1.0/root/etc/e-smith/locale/da/etc/e-smith/web/functions/htbwshaper    2009-08-24 08:48:52.000000000 -0600
+++ smeserver-htbwshaper-1.0.update/root/etc/e-smith/locale/da/etc/e-smith/web/functions/htbwshaper     2009-08-24 09:17:13.000000000 -0600
@@ -5,55 +5,55 @@
         </entry>
         <entry>
                 <base>DESC_QOS</base>
-                <trans>You can manage quality of service on your server. You must define the capacities of the band-width, the various parameters of the VOIP and your servers external interface. The information required on the SIP and RTP protocols are used to ensure a quality of service for telephony IP.</trans>
+                <trans>Du kan administrere servicekvalitet(QoS) på din server. Du skal angive størrelserne på båndbredde, de forskellige parametre i VOIP og din servers eksterne interface. Oplysninger om SIP og RTP protokoller bruges til at sikre servicekvaliteten(QoS) for IP-telefoni. </trans>
         </entry>
         <entry>
                 <base>DESC_RTP</base>
-                <trans>To open a port used by the RTP protocol, enter information below</trans>
+                <trans>Angiv information nedenfor, for at åbne en port til brug for RTP protokollen</trans>
         </entry>
        <entry>
                 <base>DESC_SIP</base>
-                <trans>Indicate the port used by the SIP protocol</trans>
+                <trans>Angiv hvilken port SIP protokollen anvender</trans>
         </entry>       
        <entry>
                 <base>DESC_INT</base>
-                <trans>Select the external network interface of your server</trans>
+                <trans>Angiv det eksterne netværksgrænseflade på din server</trans>
         </entry>
        <entry>
                 <base>DESC_BP</base>
-                <trans>Enter your band-width speed, and indicate information below</trans>
+                <trans>Indtast størrelsen på din båndbredde og angiv oplysninger nedenfor</trans>
         </entry>
        <entry>
                 <base>QOS</base>
-                <trans>Quality of service</trans>
+                <trans>Servicekvalitet (QoS)</trans>
         </entry>
        <entry>
                 <base>VALUE_INF</base>
-                <trans>Last port RTP must be higher than the first</trans>
+                <trans>Sidste RTP port skal være større end den første</trans>
         </entry>
         <entry>
                 <base>LABEL_UPLINK</base>
-                <trans>Bandwith speed Up (in kbit/s)</trans>
+                <trans>Upload båndbredde (i kbit/s)</trans>
         </entry>
         <entry>
                 <base>LABEL_DOWNLINK</base>
-                <trans>Bandwith speed Down (in kbit/s)</trans>
+                <trans>Download båndbredde (i kbit/s)</trans>
         </entry>
         <entry>
                 <base>LABEL_RTPSTART</base>
-                <trans>First port used by RTP protocol</trans>
+                <trans>Første port som anvendes til RTP protokol</trans>
         </entry>
         <entry>
                 <base>LABEL_RTPEND</base>
-                <trans>Last port used by RTP protocol</trans>
+                <trans>Sidste port som anvendes til RTP protokol</trans>
         </entry>
         <entry>
                 <base>LABEL_INT</base>
-                <trans>External network interface of your server</trans>
+                <trans>Eksternt netværksgrænseflade på din server</trans>
         </entry>
         <entry>
                 <base>LABEL_SIP</base>
-                <trans>Port used by SIP protocol</trans>
+                <trans>Port som bruges af SIP protokol</trans>
         </entry>
 
 </lexicon>
--- smeserver-htbwshaper-1.0/root/etc/e-smith/locale/pl/etc/e-smith/web/functions/htbwshaper    1969-12-31 17:00:00.000000000 -0700
+++ smeserver-htbwshaper-1.0.update/root/etc/e-smith/locale/pl/etc/e-smith/web/functions/htbwshaper     2009-08-24 09:17:15.000000000 -0600
@@ -0,0 +1,59 @@
+<lexicon lang="pl">
+        <entry>
+                <base>FORM_TITLE</base>
+                <trans>Configure quality of service</trans>
+        </entry>
+        <entry>
+                <base>DESC_QOS</base>
+                <trans>You can manage quality of service on your server. You must define the capacities of the band-width, the various parameters of the VOIP and your servers external interface. The information required on the SIP and RTP protocols are used to ensure a quality of service for telephony IP.</trans>
+        </entry>
+        <entry>
+                <base>DESC_RTP</base>
+                <trans>To open a port used by the RTP protocol, enter information below</trans>
+        </entry>
+       <entry>
+                <base>DESC_SIP</base>
+                <trans>Indicate the port used by the SIP protocol</trans>
+        </entry>       
+       <entry>
+                <base>DESC_INT</base>
+                <trans>Select the external network interface of your server</trans>
+        </entry>
+       <entry>
+                <base>DESC_BP</base>
+                <trans>Enter your band-width speed, and indicate information below</trans>
+        </entry>
+       <entry>
+                <base>QOS</base>
+                <trans>Quality of service</trans>
+        </entry>
+       <entry>
+                <base>VALUE_INF</base>
+                <trans>Last port RTP must be higher than the first</trans>
+        </entry>
+        <entry>
+                <base>LABEL_UPLINK</base>
+                <trans>Bandwith speed Up (in kbit/s)</trans>
+        </entry>
+        <entry>
+                <base>LABEL_DOWNLINK</base>
+                <trans>Bandwith speed Down (in kbit/s)</trans>
+        </entry>
+        <entry>
+                <base>LABEL_RTPSTART</base>
+                <trans>First port used by RTP protocol</trans>
+        </entry>
+        <entry>
+                <base>LABEL_RTPEND</base>
+                <trans>Last port used by RTP protocol</trans>
+        </entry>
+        <entry>
+                <base>LABEL_INT</base>
+                <trans>External network interface of your server</trans>
+        </entry>
+        <entry>
+                <base>LABEL_SIP</base>
+                <trans>Port used by SIP protocol</trans>
+        </entry>
+
+</lexicon>
--- smeserver-htbwshaper-1.0/root/etc/e-smith/locale/ro/etc/e-smith/web/functions/htbwshaper    1969-12-31 17:00:00.000000000 -0700
+++ smeserver-htbwshaper-1.0.update/root/etc/e-smith/locale/ro/etc/e-smith/web/functions/htbwshaper     2009-08-24 09:17:16.000000000 -0600
@@ -0,0 +1,59 @@
+<lexicon lang="ro">
+        <entry>
+                <base>FORM_TITLE</base>
+                <trans>Configure quality of service</trans>
+        </entry>
+        <entry>
+                <base>DESC_QOS</base>
+                <trans>You can manage quality of service on your server. You must define the capacities of the band-width, the various parameters of the VOIP and your servers external interface. The information required on the SIP and RTP protocols are used to ensure a quality of service for telephony IP.</trans>
+        </entry>
+        <entry>
+                <base>DESC_RTP</base>
+                <trans>To open a port used by the RTP protocol, enter information below</trans>
+        </entry>
+       <entry>
+                <base>DESC_SIP</base>
+                <trans>Indicate the port used by the SIP protocol</trans>
+        </entry>       
+       <entry>
+                <base>DESC_INT</base>
+                <trans>Select the external network interface of your server</trans>
+        </entry>
+       <entry>
+                <base>DESC_BP</base>
+                <trans>Enter your band-width speed, and indicate information below</trans>
+        </entry>
+       <entry>
+                <base>QOS</base>
+                <trans>Quality of service</trans>
+        </entry>
+       <entry>
+                <base>VALUE_INF</base>
+                <trans>Last port RTP must be higher than the first</trans>
+        </entry>
+        <entry>
+                <base>LABEL_UPLINK</base>
+                <trans>Bandwith speed Up (in kbit/s)</trans>
+        </entry>
+        <entry>
+                <base>LABEL_DOWNLINK</base>
+                <trans>Bandwith speed Down (in kbit/s)</trans>
+        </entry>
+        <entry>
+                <base>LABEL_RTPSTART</base>
+                <trans>First port used by RTP protocol</trans>
+        </entry>
+        <entry>
+                <base>LABEL_RTPEND</base>
+                <trans>Last port used by RTP protocol</trans>
+        </entry>
+        <entry>
+                <base>LABEL_INT</base>
+                <trans>External network interface of your server</trans>
+        </entry>
+        <entry>
+                <base>LABEL_SIP</base>
+                <trans>Port used by SIP protocol</trans>
+        </entry>
+
+</lexicon>
1	--- smeserver-htbwshaper-1.0/root/etc/e-smith/locale/da/etc/e-smith/web/functions/htbwshaper 2009-08-24 08:48:52.000000000 -0600
2	+++ smeserver-htbwshaper-1.0.update/root/etc/e-smith/locale/da/etc/e-smith/web/functions/htbwshaper 2009-08-24 09:17:13.000000000 -0600
3	@@ -5,55 +5,55 @@
4	</entry>
5	<entry>
6	<base>DESC_QOS</base>
7	- <trans>You can manage quality of service on your server. You must define the capacities of the band-width, the various parameters of the VOIP and your servers external interface. The information required on the SIP and RTP protocols are used to ensure a quality of service for telephony IP.</trans>
8	+ <trans>Du kan administrere servicekvalitet(QoS) på din server. Du skal angive størrelserne på båndbredde, de forskellige parametre i VOIP og din servers eksterne interface. Oplysninger om SIP og RTP protokoller bruges til at sikre servicekvaliteten(QoS) for IP-telefoni. </trans>
9	</entry>
10	<entry>
11	<base>DESC_RTP</base>
12	- <trans>To open a port used by the RTP protocol, enter information below</trans>
13	+ <trans>Angiv information nedenfor, for at åbne en port til brug for RTP protokollen</trans>
14	</entry>
15	<entry>
16	<base>DESC_SIP</base>
17	- <trans>Indicate the port used by the SIP protocol</trans>
18	+ <trans>Angiv hvilken port SIP protokollen anvender</trans>
19	</entry>
20	<entry>
21	<base>DESC_INT</base>
22	- <trans>Select the external network interface of your server</trans>
23	+ <trans>Angiv det eksterne netværksgrænseflade på din server</trans>
24	</entry>
25	<entry>
26	<base>DESC_BP</base>
27	- <trans>Enter your band-width speed, and indicate information below</trans>
28	+ <trans>Indtast størrelsen på din båndbredde og angiv oplysninger nedenfor</trans>
29	</entry>
30	<entry>
31	<base>QOS</base>
32	- <trans>Quality of service</trans>
33	+ <trans>Servicekvalitet (QoS)</trans>
34	</entry>
35	<entry>
36	<base>VALUE_INF</base>
37	- <trans>Last port RTP must be higher than the first</trans>
38	+ <trans>Sidste RTP port skal være større end den første</trans>
39	</entry>
40	<entry>
41	<base>LABEL_UPLINK</base>
42	- <trans>Bandwith speed Up (in kbit/s)</trans>
43	+ <trans>Upload båndbredde (i kbit/s)</trans>
44	</entry>
45	<entry>
46	<base>LABEL_DOWNLINK</base>
47	- <trans>Bandwith speed Down (in kbit/s)</trans>
48	+ <trans>Download båndbredde (i kbit/s)</trans>
49	</entry>
50	<entry>
51	<base>LABEL_RTPSTART</base>
52	- <trans>First port used by RTP protocol</trans>
53	+ <trans>Første port som anvendes til RTP protokol</trans>
54	</entry>
55	<entry>
56	<base>LABEL_RTPEND</base>
57	- <trans>Last port used by RTP protocol</trans>
58	+ <trans>Sidste port som anvendes til RTP protokol</trans>
59	</entry>
60	<entry>
61	<base>LABEL_INT</base>
62	- <trans>External network interface of your server</trans>
63	+ <trans>Eksternt netværksgrænseflade på din server</trans>
64	</entry>
65	<entry>
66	<base>LABEL_SIP</base>
67	- <trans>Port used by SIP protocol</trans>
68	+ <trans>Port som bruges af SIP protokol</trans>
69	</entry>
70
71	</lexicon>
72	--- smeserver-htbwshaper-1.0/root/etc/e-smith/locale/pl/etc/e-smith/web/functions/htbwshaper 1969-12-31 17:00:00.000000000 -0700
73	+++ smeserver-htbwshaper-1.0.update/root/etc/e-smith/locale/pl/etc/e-smith/web/functions/htbwshaper 2009-08-24 09:17:15.000000000 -0600
74	@@ -0,0 +1,59 @@
75	+<lexicon lang="pl">
76	+ <entry>
77	+ <base>FORM_TITLE</base>
78	+ <trans>Configure quality of service</trans>
79	+ </entry>
80	+ <entry>
81	+ <base>DESC_QOS</base>
82	+ <trans>You can manage quality of service on your server. You must define the capacities of the band-width, the various parameters of the VOIP and your servers external interface. The information required on the SIP and RTP protocols are used to ensure a quality of service for telephony IP.</trans>
83	+ </entry>
84	+ <entry>
85	+ <base>DESC_RTP</base>
86	+ <trans>To open a port used by the RTP protocol, enter information below</trans>
87	+ </entry>
88	+ <entry>
89	+ <base>DESC_SIP</base>
90	+ <trans>Indicate the port used by the SIP protocol</trans>
91	+ </entry>
92	+ <entry>
93	+ <base>DESC_INT</base>
94	+ <trans>Select the external network interface of your server</trans>
95	+ </entry>
96	+ <entry>
97	+ <base>DESC_BP</base>
98	+ <trans>Enter your band-width speed, and indicate information below</trans>
99	+ </entry>
100	+ <entry>
101	+ <base>QOS</base>
102	+ <trans>Quality of service</trans>
103	+ </entry>
104	+ <entry>
105	+ <base>VALUE_INF</base>
106	+ <trans>Last port RTP must be higher than the first</trans>
107	+ </entry>
108	+ <entry>
109	+ <base>LABEL_UPLINK</base>
110	+ <trans>Bandwith speed Up (in kbit/s)</trans>
111	+ </entry>
112	+ <entry>
113	+ <base>LABEL_DOWNLINK</base>
114	+ <trans>Bandwith speed Down (in kbit/s)</trans>
115	+ </entry>
116	+ <entry>
117	+ <base>LABEL_RTPSTART</base>
118	+ <trans>First port used by RTP protocol</trans>
119	+ </entry>
120	+ <entry>
121	+ <base>LABEL_RTPEND</base>
122	+ <trans>Last port used by RTP protocol</trans>
123	+ </entry>
124	+ <entry>
125	+ <base>LABEL_INT</base>
126	+ <trans>External network interface of your server</trans>
127	+ </entry>
128	+ <entry>
129	+ <base>LABEL_SIP</base>
130	+ <trans>Port used by SIP protocol</trans>
131	+ </entry>
132	+
133	+</lexicon>
134	--- smeserver-htbwshaper-1.0/root/etc/e-smith/locale/ro/etc/e-smith/web/functions/htbwshaper 1969-12-31 17:00:00.000000000 -0700
135	+++ smeserver-htbwshaper-1.0.update/root/etc/e-smith/locale/ro/etc/e-smith/web/functions/htbwshaper 2009-08-24 09:17:16.000000000 -0600
136	@@ -0,0 +1,59 @@
137	+<lexicon lang="ro">
138	+ <entry>
139	+ <base>FORM_TITLE</base>
140	+ <trans>Configure quality of service</trans>
141	+ </entry>
142	+ <entry>
143	+ <base>DESC_QOS</base>
144	+ <trans>You can manage quality of service on your server. You must define the capacities of the band-width, the various parameters of the VOIP and your servers external interface. The information required on the SIP and RTP protocols are used to ensure a quality of service for telephony IP.</trans>
145	+ </entry>
146	+ <entry>
147	+ <base>DESC_RTP</base>
148	+ <trans>To open a port used by the RTP protocol, enter information below</trans>
149	+ </entry>
150	+ <entry>
151	+ <base>DESC_SIP</base>
152	+ <trans>Indicate the port used by the SIP protocol</trans>
153	+ </entry>
154	+ <entry>
155	+ <base>DESC_INT</base>
156	+ <trans>Select the external network interface of your server</trans>
157	+ </entry>
158	+ <entry>
159	+ <base>DESC_BP</base>
160	+ <trans>Enter your band-width speed, and indicate information below</trans>
161	+ </entry>
162	+ <entry>
163	+ <base>QOS</base>
164	+ <trans>Quality of service</trans>
165	+ </entry>
166	+ <entry>
167	+ <base>VALUE_INF</base>
168	+ <trans>Last port RTP must be higher than the first</trans>
169	+ </entry>
170	+ <entry>
171	+ <base>LABEL_UPLINK</base>
172	+ <trans>Bandwith speed Up (in kbit/s)</trans>
173	+ </entry>
174	+ <entry>
175	+ <base>LABEL_DOWNLINK</base>
176	+ <trans>Bandwith speed Down (in kbit/s)</trans>
177	+ </entry>
178	+ <entry>
179	+ <base>LABEL_RTPSTART</base>
180	+ <trans>First port used by RTP protocol</trans>
181	+ </entry>
182	+ <entry>
183	+ <base>LABEL_RTPEND</base>
184	+ <trans>Last port used by RTP protocol</trans>
185	+ </entry>
186	+ <entry>
187	+ <base>LABEL_INT</base>
188	+ <trans>External network interface of your server</trans>
189	+ </entry>
190	+ <entry>
191	+ <base>LABEL_SIP</base>
192	+ <trans>Port used by SIP protocol</trans>
193	+ </entry>
194	+
195	+</lexicon>