| 1 |
brianr |
1.1 |
diff -ruN smeserver-libreswan-xl2tpd-0.5.old/root/etc/e-smith/templates/etc/ipsec.d/ipsec.conf/20defaultL2tpd smeserver-libreswan-xl2tpd-0.5/root/etc/e-smith/templates/etc/ipsec.d/ipsec.conf/20defaultL2tpd |
| 2 |
|
|
--- smeserver-libreswan-xl2tpd-0.5.old/root/etc/e-smith/templates/etc/ipsec.d/ipsec.conf/20defaultL2tpd 2020-01-30 15:25:07.275975761 +0100 |
| 3 |
|
|
+++ smeserver-libreswan-xl2tpd-0.5/root/etc/e-smith/templates/etc/ipsec.d/ipsec.conf/20defaultL2tpd 2020-01-30 15:32:48.235443757 +0100 |
| 4 |
|
|
@@ -28,9 +28,18 @@ |
| 5 |
|
|
|
| 6 |
|
|
else { |
| 7 |
|
|
|
| 8 |
|
|
- # Currently these are hard coded but could come from the DB key |
| 9 |
|
|
+ # Currently most of these are hard coded but could come from the DB key |
| 10 |
|
|
+ |
| 11 |
|
|
+ # For nat connections you can use "vhost:%no,%priv" |
| 12 |
|
|
+ # See above |
| 13 |
|
|
+ # https://github.com/libreswan/libreswan/blob/master/docs/examples/l2tp-psk.conf |
| 14 |
|
|
+ # see https://libreswan.org/man/ipsec.conf.5.html -> leftsubnet |
| 15 |
|
|
+ |
| 16 |
|
|
+ $OUT .= "conn $ipsecprop-NAT"; |
| 17 |
|
|
+ $OUT .= " rightsubnet=vhost:%priv"; |
| 18 |
|
|
+ $OUT .= " also=$ipsecprop-noNAT"; |
| 19 |
|
|
|
| 20 |
|
|
- $OUT .= "conn $ipsecprop\n"; |
| 21 |
|
|
+ $OUT .= "conn $ipsecprop-noNAT\n"; |
| 22 |
|
|
$OUT .= " authby=secret\n"; |
| 23 |
|
|
$OUT .= " pfs=no\n"; |
| 24 |
|
|
$OUT .= " auto=add\n"; |
| 25 |
|
|
@@ -61,12 +70,8 @@ |
| 26 |
|
|
$OUT .= " dpdaction=$dpdaction\n"; |
| 27 |
|
|
|
| 28 |
|
|
# Some additional config entries if required |
| 29 |
|
|
- # For nat connections you can use "vhost:%no,%priv" |
| 30 |
|
|
- # Disabled for now - needs some thought |
| 31 |
|
|
- # Probably only needed if you are doing subnet <-> subnet |
| 32 |
|
|
- # Most likely not required for dialin |
| 33 |
|
|
- # see https://libreswan.org/man/ipsec.conf.5.html -> leftsubnet |
| 34 |
|
|
- |
| 35 |
|
|
+ # right subnet would not normally be used as it is used above |
| 36 |
|
|
+ |
| 37 |
|
|
my $rightsubnet = $ipsecDB->get_prop( $ipsecprop, 'rightsubnet' ) || ''; |
| 38 |
|
|
if ( $rightsubnet ne '' ) { |
| 39 |
|
|
$OUT .= " rightsubnet=$rightsubnet\n"; |
| 40 |
|
|
diff -ruN smeserver-libreswan-xl2tpd-0.5.old/root/etc/e-smith/templates/etc/ppp/ip-up.local/30ipparam30xl2tpd smeserver-libreswan-xl2tpd-0.5/root/etc/e-smith/templates/etc/ppp/ip-up.local/30ipparam30xl2tpd |
| 41 |
|
|
--- smeserver-libreswan-xl2tpd-0.5.old/root/etc/e-smith/templates/etc/ppp/ip-up.local/30ipparam30xl2tpd 2017-11-24 13:51:59.000000000 +0100 |
| 42 |
|
|
+++ smeserver-libreswan-xl2tpd-0.5/root/etc/e-smith/templates/etc/ppp/ip-up.local/30ipparam30xl2tpd 2020-01-30 15:32:48.235443757 +0100 |
| 43 |
|
|
@@ -1,4 +1,11 @@ |
| 44 |
|
|
- xl2tpd) |
| 45 |
|
|
- echo xl2tpd "$@" |logger -t "ip-up" |
| 46 |
|
|
- /sbin/e-smith/signal-event ip-up.xl2tpd |
| 47 |
|
|
- ;; |
| 48 |
|
|
+{ |
| 49 |
|
|
+ my $status = ${'xl2tpd'}{'debug'} || 'disabled'; |
| 50 |
|
|
+ |
| 51 |
|
|
+ $OUT .= " xl2tpd)\n"; |
| 52 |
|
|
+ |
| 53 |
|
|
+ if ( $status eq 'enabled' ) { |
| 54 |
|
|
+ $OUT .= " echo xl2tpd \"$@\" |logger -t \"xl2tpd-ip-up\" \n"; |
| 55 |
|
|
+ } |
| 56 |
|
|
+ $OUT .= " /sbin/e-smith/signal-event ip-up.xl2tpd \"\$@\" \n"; |
| 57 |
|
|
+ $OUT .= " ;;"; |
| 58 |
|
|
+} |
| 59 |
|
|
diff -ruN smeserver-libreswan-xl2tpd-0.5.old/root/etc/e-smith/templates/etc/ppp/options.xl2tpd/10default smeserver-libreswan-xl2tpd-0.5/root/etc/e-smith/templates/etc/ppp/options.xl2tpd/10default |
| 60 |
|
|
--- smeserver-libreswan-xl2tpd-0.5.old/root/etc/e-smith/templates/etc/ppp/options.xl2tpd/10default 2017-11-24 13:51:59.000000000 +0100 |
| 61 |
|
|
+++ smeserver-libreswan-xl2tpd-0.5/root/etc/e-smith/templates/etc/ppp/options.xl2tpd/10default 2020-01-30 15:32:48.235443757 +0100 |
| 62 |
|
|
@@ -25,6 +25,7 @@ |
| 63 |
|
|
my $InternalIP = $configDB->get_prop( "InternalInterface", 'IPAddress' ); |
| 64 |
|
|
my $DNS = $configDB->get_prop( "xl2tpd", 'DNS' ) || ''; |
| 65 |
|
|
my $debug = $configDB->get_prop( "xl2tpd", 'debug' ) || 'disabled'; |
| 66 |
|
|
+ my $mtu = $configDB->get_prop( "xl2tpd", 'mtu' ) || '1400'; |
| 67 |
|
|
|
| 68 |
|
|
$OUT .= "#x2ltpd\n"; |
| 69 |
|
|
$OUT .= "login\n"; |
| 70 |
|
|
@@ -45,8 +46,8 @@ |
| 71 |
|
|
|
| 72 |
|
|
$OUT .= "ipparam xl2tpd\n"; |
| 73 |
|
|
$OUT .= "auth\n"; |
| 74 |
|
|
- $OUT .= "mtu 1400\n"; |
| 75 |
|
|
- $OUT .= "mru 1400\n"; |
| 76 |
|
|
+ $OUT .= "mtu $mtu\n"; |
| 77 |
|
|
+ $OUT .= "mru $mtu\n"; |
| 78 |
|
|
$OUT .= "hide-password\n"; |
| 79 |
|
|
$OUT .= "name l2tpd\n"; |
| 80 |
|
|
$OUT .= "proxyarp\n"; |
Parent Directory
| 
Revision Log
| 
Revision Graph
