--- smeserver-openvpn-bridge-2.1/root/etc/e-smith/locale/bg/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:13:07.196262796 +0200 +++ smeserver-openvpn-bridge-2.1.update/root/etc/e-smith/locale/bg/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:33:04.427514444 +0200 @@ -1,92 +1,92 @@ FORM_TITLE - Bridged OpenVPN daemon configuration + Конфигурация на процеса на Bridged OpenVPN DESC_FIRST_PAGE - Bridged mode allows VPN clients to have an IP address in the local network, thus, they have access to every ressources of your local network.

]]> + Режимът Bridged позволява VPN клиентите да имат IP адрес от локалната мрежа, и така те да имат достъп до всички ресурси в нея.

]]> LABEL_STATUS - Service Status + Състояние на услугата LABEL_AUTH_TYPE - Authentication mode + Режим на автентикация LABEL_IP_POOL - IP Address range + Обхват от IP адреси DESC_RULE_BUTTON - Configuration rules management + Управление на конфигурацията на правилата DESC_SHOW_CLIENTS_BUTTON - Display connected clients + Показване на включените клиенти DESC_CONFIG_BUTTON - Service configuration + Конфигурация на услугата DESC_CRT_CONFIG_BUTTON - Certificates configuration + Конфигурация на сертификатите LABEL_CRT_STATUS - Certificates status + Състояние на сертификатите CRT_CONFIG_ERROR - There's a problem with the configuration of your certificates, you should check it.]]> + Има проблем с конфигурацията на сертификатите, трябва да ги проверите.]]> CRT_CONFIG_OK - Certificates are ready]]> + Сертификатите са готови]]> CRT_ONLY - Certificate only + Само сертификат CRT_WITH_PASS - Certificate and login/password + Сертификат с име и парола DESC_RULES_PAGE - - Give him a fixed IP address
- Configure the gateway redirection
- Temporarily denied the access
]]> + - Да му дадете фиксиран IP адрес
- Да конфигурирате пренасочване на шлюза
- Временно да забраните достъпа
]]> DESC_RULES - Actual rules]]> + Действащи правила]]> NO_RULE NO_RULE - There's no rule]]> + Няма правило]]> DESC_ADD_RULE_BUTTON - Add a rule + Добави правило @@ -106,7 +106,7 @@ GATEWAY_REDIRECTION - Gateway Redirection + Пренасочване на шлюза @@ -126,282 +126,327 @@ DYNAMIC - Dynamic + Динамичен ENABLED - Разрешен + Включен DISABLED - Забранено + Изключен ALLOWED - Allowed + Позволен DENIED - Denied + Забранен DESC_ADD_OR_MODIFY_PAGE - Create or modify]]> + Създаване или промяна]]> DESC_COMMON_NAME - Enter a common name. If a client connects with a certificates which has this common name, the coresponding configuration will be applied. + Въведете common name. Ако клиент се свърже със сертификати, в които common name съвпадат, ще бъде приложена съответната конфигурация. DESC_COMMENT - Enter a comment (Optional) + Въведете коментар (по желание) DESC_RESERVED_IP - If you enter an IP address, it will allways be affected to the client connecting with this certificate. This IP address must be in your local network (but can be out of the VPN range). Be sure this IP isn't used by another host on your network. + Ако въведете IP адрес, той винаги ще бъде асоцииран на клиента, свързващ се с този сертификат. Този IP адрес трябва да е от локалната мрежа (но, може да е извън обхвата VPN). Уверете се че този IP адрес не е използван от друг хост в мрежата. LABEL_RESERVED_IP - Reserved IP Address + Резервиран IP адрес DESC_GW_REDIRECTION - Warning: enabling this option can slow down your internet access (for both your client and your local networks)]]> + Внимание: включването тази опция може да намали скоростта на интернет (както за клиента, така и за локалните мрежи)]]> LABEL_GW_REDIRECTION - Gateway redirection + Пренасочване на шлюза DESC_ACCESS - You can temporarily block a client. This does not offer a strong security. If you want to permanently deny a client, you should revoke it's certificate. + Можете временно да блокирате клиент. Това не осигурява голяма сигурност. Ако искате за постоянно да забраните клиент, трябва да оттеглите (revoke) неговия сертификат. DESC_REMOVE_PAGE - You are about to remove the following rule:]]> + Ще премахнете следното правило:]]> DESC_CONNECTED_CLIENTS_PAGE - + REFRESH - Refresh + Опресни ERROR_CONNECT_TO_MANAGER - An error occured while connecting to the manager. Check the service is running.]]> + Възникна грешка при свързване със сървъра. Проверете дали услугата работи.]]> NO_CLIENTS_CONNECTED - There's no client connected at this time.]]> + Няма клиенти, които са свързани в момента.]]> DESC_CONFIG_PAGE - This page lets you configure the service + Тази страница в позволява да настройвате услугата DESC_STATUS - Do you want to enable the service ? + Искате ли да включите услугата? DESC_AUTH_TYPE - Choose the authentication mode. "Certificate only" can be usefull if you need to connect hosts without humain intervention, but it does't provide the same level of security that "Certificate and login/password" provides + Изберете метод на автентикация. "Само сертификат" може да бъде полезно ако искате да свързвате хостове без човешка намеса, но той не предоставя същото ниво на сигурност, което дава "Сертификат с име и парола" DESC_START_POOL - You have to choose a IP address range for VPN clients. This range must be in the local network. Please, check that none IP address in this range is used by another host. Enter the first IP Address + Трябва да изберете обхват от IP адреси за VPN клиентите. Този обхват трябва да е от локалната мрежа. Моля, проверете че никой от тези адреси не се използва от друг хост. Въведете началния IP адрес LABEL_START_POOL - First IP Address + Начален IP адрес DESC_END_POOL - Enter the last IP Address + Въведете последния IP адрес LABEL_END_POOL - Last IP Address + Последен IP адрес DESC_CRT_CONFIG_PAGE - - An authoritative certificate (CA). This certificate is used to check the clients certificates
- A server certificate. It will be presented to the client so they are sure they are connecting to your server
- The secret key associated with the server certificate
- A Diffie-Helman parameter file. It will allow dynamic key exchange
- A shared secret key. This key will allow an additional TLS authentication
]]> + - Сертификат на издателя (CA). Този сертификат се използва за проверка на сертификатите на клиентите
- Сертификат на сървъра. Той ще бъде представен на клиентите, така че те да са сигурни че се свързват към Вашия сървър
- Таен ключ, асоцииран със сертификата на сървъра
- Файл с параметрите на Diffie-Helman. Той ще позволи динамична обмяна на ключове
- Споделен таен ключ. Този ключ ще позволи допълнителна автентикация за TLS
]]> DESC_CA_PEM - Enter the master certificate in pem format + Въведете основния сертификат във формат PEM DESC_CRT_PEM - Enter the server certificate in pem format + Въведете сертификата на сървъра във формат PEM DESC_KEY_PEM - Enter the secret key associated with the server certificate, in pem format + Въведете тайния ключ, асоцииран със сертификата на сървъра във формат PEM DESC_DH_PEM - Enter Diffie-Helman parameters + Въведете параметрите на Diffie-Helman DESC_TA_PEM - Enter the static shared key. This key will be used for an additional authentication. This key is optional, but it can harden the security + Въведете статичния споделен ключ. Този ключ ще се използва за допълнителна автентикация. Той е по желание, но може да повиши сигурността SUCCESS - The new settings have been saved + Новите параметри бяха запазени NOT_A_VALID_IP - You have to enter a valid IP number + Трябва да въведете валиден IP адрес NOT_IN_LOCAL_NET - You have to enter an IP address in your local network + Трябва да въведете IP адрес от локалната мрежа SHOW_SAMPLE_CONFIG - Display a functional client configuration file + Покажи работещ файл с конфигурация на клиента DESC_DISPLAY_CLIENT_CONF - You also have to download the certification file in # PKCS12 format (which contains the CA certificate, the user certificate and the user secret key).
]]> + Трябва също да свалите и файла със сертификата във формат # PKCS12 (който съдържа сертификата на издателя, сертификата на потребителя и тайния ключ на потребителя).
]]> REAL_IP - Real IP address + Реален IP адрес VIRTUAL_IP - VPN IP address + VPN IP адрес SENT - Bytes sent + Изпратени байтове RECEIVED - Bytes received + Получени байтове CONNECTED_SINCE - Connected since + Свързан от DISCONNECT - Disconnect + Разкачи BAD_VALUE - Incorrect value + Некоректна стойност CANCELED - Cancelled + Отменено DESC_CLIENT_DISCONECT_PAGE - Your are going to diconnect this user. Are you sure you want to continue ? + Ще разкачите този потребител. Искате ли да продължите? CLIENT_DISCONNECTED - The client has been disconnected + Клиентът беше разкачен INVALID_CHARS - "{$string}" contains forbiden characters + "{$string}" съдържа забранени символи BRIDGE_NOT_ENABLED - The bridge service must be enabled.
The following commands will enable it:
db configuration setprop bridge status enabled
/etc/init.d/bridge start

]]> + Услугата bridge трябва да бъде включена.
Следните команди ще я включат:
db configuration setprop bridge status enabled
/etc/init.d/bridge start

]]> NOT_A_VALID_URL - "{$string}" isn't a valid URL + "{$string}" не е валиден URL DESC_CRL_URL - Enter the URL to update the CRL. (if phpki runs on the same server, you can let the default value) + Въведете URL за актуализация на CRL. (ако phpki работи на същия сървър, можете да оставите стандартната стойност) LABEL_CRL_URL - URL to update the CRL + URL за актуализация на CRL LABEL_CA_PEM - CA certificate + Сертификат на удостоверителя (CA) LABEL_CRT_PEM - Server certificate + Сертификат на сървъра LABEL_KEY_PEM - Server private key + Частен ключ на сървъра LABEL_DH_PEM - DH parameters + DH параметри LABEL_TA_PEM - Static key + Статичен ключ + + DESC_HMAC + HMAC е част от кодирането на канала за данни на openvpn (където пътуват данните) след кодирането със шифъра. Стандартен е несигурния SHA1, предлагаме Ви да ползват поне SHA256. Тази настройка трябва да е еднаква на сървъра и клиента + + + LABEL_HMAC + HMAC алгоритъм + + + DESC_CIPHER + Шифърът, използван за канала с данни за openvpn. Стандартно се използва несигурния алгоритъм BlowFish. Предлагаме Ви да ползвате AES-128-CBC или по-висок. Тази настройка трябва да е еднаква за сървъра и клиента. + + + LABEL_CIPHER + Алгоритъм на шифъра за кодиране + + + LINK + Състояние на връзката + + + UP + Горе + + + SYSTEMD_RETURNED + Systemd отговаря че услугата е + + + CHANGEME_INSECURE + Моля, променете несигурния параметър + + + SUGGESTED + Предложена стойност + + + DEFAULT + Стандартно + + + ERROR + Грешка + + --- smeserver-openvpn-bridge-2.1/root/etc/e-smith/locale/da/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:13:07.190263026 +0200 +++ smeserver-openvpn-bridge-2.1.update/root/etc/e-smith/locale/da/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:33:04.552509661 +0200 @@ -404,4 +404,49 @@ LABEL_TA_PEM Statisk nøgle + + DESC_HMAC + HMAC is part of the encryption of the data channel for openvpn (where your data travel) after encryption with the cipher. Default is the insecure SHA1, we suggest you to at least use SHA256. This setting should match on both the server and the client + + + LABEL_HMAC + algoritme + + + DESC_CIPHER + The cipher used for your data channel for openvpn. The default is to use the insecure BlowFish algorithm. We suggest you the AES-128-CBC or higher. This setting should match on both the server and the client. + + + LABEL_CIPHER + Cipher encryption algorithm + + + LINK + Status på Mailman + + + UP + Up + + + SYSTEMD_RETURNED + Systemtjenester + + + CHANGEME_INSECURE + Please change this insecure parameter + + + SUGGESTED + Nuværende værdi + + + DEFAULT + standard + + + ERROR + Fejl + + --- smeserver-openvpn-bridge-2.1/root/etc/e-smith/locale/de/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:13:07.201262606 +0200 +++ smeserver-openvpn-bridge-2.1.update/root/etc/e-smith/locale/de/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:33:04.673505030 +0200 @@ -404,4 +404,49 @@ LABEL_TA_PEM Statischer Schlüssel + + DESC_HMAC + HMAC is part of the encryption of the data channel for openvpn (where your data travel) after encryption with the cipher. Default is the insecure SHA1, we suggest you to at least use SHA256. This setting should match on both the server and the client + + + LABEL_HMAC + Algorithmus + + + DESC_CIPHER + The cipher used for your data channel for openvpn. The default is to use the insecure BlowFish algorithm. We suggest you the AES-128-CBC or higher. This setting should match on both the server and the client. + + + LABEL_CIPHER + Cipher encryption algorithm + + + LINK + Anmeldestatus + + + UP + Up + + + SYSTEMD_RETURNED + System Dienste + + + CHANGEME_INSECURE + Please change this insecure parameter + + + SUGGESTED + Aktueller Wert + + + DEFAULT + Fehler + + + ERROR + Fehler + + --- smeserver-openvpn-bridge-2.1/root/etc/e-smith/locale/el/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:13:07.196262796 +0200 +++ smeserver-openvpn-bridge-2.1.update/root/etc/e-smith/locale/el/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:33:04.796500324 +0200 @@ -221,7 +221,7 @@ DESC_STATUS - Do you want to enable the service ? + Do you want to enable the service? @@ -347,7 +347,7 @@ DESC_CLIENT_DISCONECT_PAGE - Your are going to diconnect this user. Are you sure you want to continue ? + Είστε σίγουροι ότι επιθυμείτε να συνεχίσετε; ]]> @@ -404,4 +404,49 @@ LABEL_TA_PEM Static key + + DESC_HMAC + HMAC is part of the encryption of the data channel for openvpn (where your data travel) after encryption with the cipher. Default is the insecure SHA1, we suggest you to at least use SHA256. This setting should match on both the server and the client + + + LABEL_HMAC + HMAC algorithm + + + DESC_CIPHER + The cipher used for your data channel for openvpn. The default is to use the insecure BlowFish algorithm. We suggest you the AES-128-CBC or higher. This setting should match on both the server and the client. + + + LABEL_CIPHER + Cipher encryption algorithm + + + LINK + Κατάσταση σύνδεσης + + + UP + Up + + + SYSTEMD_RETURNED + Systemd returned service as + + + CHANGEME_INSECURE + Please change this insecure parameter + + + SUGGESTED + Τρέχουσα τιμή + + + DEFAULT + Προεπιλογή + + + ERROR + Σφάλμα + + --- smeserver-openvpn-bridge-2.1/root/etc/e-smith/locale/es/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:13:07.196262796 +0200 +++ smeserver-openvpn-bridge-2.1.update/root/etc/e-smith/locale/es/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:33:04.917495696 +0200 @@ -221,7 +221,7 @@ DESC_STATUS - Do you want to enable the service ? + ¿ Desea reenviar estos correos ? @@ -347,7 +347,7 @@ DESC_CLIENT_DISCONECT_PAGE - Your are going to diconnect this user. Are you sure you want to continue ? + ¿Está seguro de que desea continuar? ]]> @@ -404,4 +404,49 @@ LABEL_TA_PEM Static key + + DESC_HMAC + HMAC is part of the encryption of the data channel for openvpn (where your data travel) after encryption with the cipher. Default is the insecure SHA1, we suggest you to at least use SHA256. This setting should match on both the server and the client + + + LABEL_HMAC + algoritmo + + + DESC_CIPHER + The cipher used for your data channel for openvpn. The default is to use the insecure BlowFish algorithm. We suggest you the AES-128-CBC or higher. This setting should match on both the server and the client. + + + LABEL_CIPHER + Cipher encryption algorithm + + + LINK + estado de la sesión + + + UP + Up + + + SYSTEMD_RETURNED + Systemd returned service as + + + CHANGEME_INSECURE + Please change this insecure parameter + + + SUGGESTED + Valor actual + + + DEFAULT + Predeterminado + + + ERROR + Error + + --- smeserver-openvpn-bridge-2.1/root/etc/e-smith/locale/et/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:13:07.196262796 +0200 +++ smeserver-openvpn-bridge-2.1.update/root/etc/e-smith/locale/et/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:33:05.045490796 +0200 @@ -221,7 +221,7 @@ DESC_STATUS - Do you want to enable the service ? + Do you want to enable the service? @@ -347,7 +347,7 @@ DESC_CLIENT_DISCONECT_PAGE - Your are going to diconnect this user. Are you sure you want to continue ? + Oled kindel, et tahad jätkata? ]]> @@ -404,4 +404,49 @@ LABEL_TA_PEM Static key + + DESC_HMAC + HMAC is part of the encryption of the data channel for openvpn (where your data travel) after encryption with the cipher. Default is the insecure SHA1, we suggest you to at least use SHA256. This setting should match on both the server and the client + + + LABEL_HMAC + HMAC algorithm + + + DESC_CIPHER + The cipher used for your data channel for openvpn. The default is to use the insecure BlowFish algorithm. We suggest you the AES-128-CBC or higher. This setting should match on both the server and the client. + + + LABEL_CIPHER + Cipher encryption algorithm + + + LINK + logimise staatus + + + UP + Up + + + SYSTEMD_RETURNED + Systemd returned service as + + + CHANGEME_INSECURE + Please change this insecure parameter + + + SUGGESTED + Hetke väärtus + + + DEFAULT + Vaikimisi + + + ERROR + Viga + + --- smeserver-openvpn-bridge-2.1/root/etc/e-smith/locale/fr/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:13:07.197262758 +0200 +++ smeserver-openvpn-bridge-2.1.update/root/etc/e-smith/locale/fr/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:33:05.166486167 +0200 @@ -404,4 +404,49 @@ LABEL_TA_PEM Clef statique + + DESC_HMAC + HMAC is part of the encryption of the data channel for openvpn (where your data travel) after encryption with the cipher. Default is the insecure SHA1, we suggest you to at least use SHA256. This setting should match on both the server and the client + + + LABEL_HMAC + HMAC algorithm + + + DESC_CIPHER + The cipher used for your data channel for openvpn. The default is to use the insecure BlowFish algorithm. We suggest you the AES-128-CBC or higher. This setting should match on both the server and the client. + + + LABEL_CIPHER + Cipher encryption algorithm + + + LINK + Statuts de connexion + + + UP + Up + + + SYSTEMD_RETURNED + Services du systeme + + + CHANGEME_INSECURE + Please change this insecure parameter + + + SUGGESTED + Valeur actuelle + + + DEFAULT + Par défaut + + + ERROR + Erreur + + --- smeserver-openvpn-bridge-2.1/root/etc/e-smith/locale/he/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:13:07.197262758 +0200 +++ smeserver-openvpn-bridge-2.1.update/root/etc/e-smith/locale/he/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:33:05.283481689 +0200 @@ -221,7 +221,7 @@ DESC_STATUS - Do you want to enable the service ? + Do you want to enable the service? @@ -347,7 +347,7 @@ DESC_CLIENT_DISCONECT_PAGE - Your are going to diconnect this user. Are you sure you want to continue ? + You are going to diconnect this user. Are you sure you want to continue? @@ -404,4 +404,49 @@ LABEL_TA_PEM Static key + + DESC_HMAC + HMAC is part of the encryption of the data channel for openvpn (where your data travel) after encryption with the cipher. Default is the insecure SHA1, we suggest you to at least use SHA256. This setting should match on both the server and the client + + + LABEL_HMAC + HMAC algorithm + + + DESC_CIPHER + The cipher used for your data channel for openvpn. The default is to use the insecure BlowFish algorithm. We suggest you the AES-128-CBC or higher. This setting should match on both the server and the client. + + + LABEL_CIPHER + Cipher encryption algorithm + + + LINK + מצב חיבור + + + UP + Up + + + SYSTEMD_RETURNED + Systemd returned service as + + + CHANGEME_INSECURE + Please change this insecure parameter + + + SUGGESTED + ערך נוכחי + + + DEFAULT + ברירת מחדל + + + ERROR + שגיאה + + --- smeserver-openvpn-bridge-2.1/root/etc/e-smith/locale/hu/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:13:07.197262758 +0200 +++ smeserver-openvpn-bridge-2.1.update/root/etc/e-smith/locale/hu/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:33:05.403477096 +0200 @@ -221,7 +221,7 @@ DESC_STATUS - Do you want to enable the service ? + Do you want to enable the service? @@ -347,7 +347,7 @@ DESC_CLIENT_DISCONECT_PAGE - Your are going to diconnect this user. Are you sure you want to continue ? + Biztos hogy folytatja? ]]> @@ -404,4 +404,49 @@ LABEL_TA_PEM Static key + + DESC_HMAC + HMAC is part of the encryption of the data channel for openvpn (where your data travel) after encryption with the cipher. Default is the insecure SHA1, we suggest you to at least use SHA256. This setting should match on both the server and the client + + + LABEL_HMAC + HMAC algorithm + + + DESC_CIPHER + The cipher used for your data channel for openvpn. The default is to use the insecure BlowFish algorithm. We suggest you the AES-128-CBC or higher. This setting should match on both the server and the client. + + + LABEL_CIPHER + Cipher encryption algorithm + + + LINK + bejelentkezési állapot + + + UP + Up + + + SYSTEMD_RETURNED + Systemd returned service as + + + CHANGEME_INSECURE + Please change this insecure parameter + + + SUGGESTED + Érvényes érték + + + DEFAULT + Alapértelmezett + + + ERROR + Hiba + + --- smeserver-openvpn-bridge-2.1/root/etc/e-smith/locale/id/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:13:07.197262758 +0200 +++ smeserver-openvpn-bridge-2.1.update/root/etc/e-smith/locale/id/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:33:05.530472235 +0200 @@ -221,7 +221,7 @@ DESC_STATUS - Do you want to enable the service ? + Do you want to enable the service? @@ -347,7 +347,7 @@ DESC_CLIENT_DISCONECT_PAGE - Your are going to diconnect this user. Are you sure you want to continue ? + Anda yakin ingin melanjutkan? ]]> @@ -404,4 +404,49 @@ LABEL_TA_PEM Static key + + DESC_HMAC + HMAC is part of the encryption of the data channel for openvpn (where your data travel) after encryption with the cipher. Default is the insecure SHA1, we suggest you to at least use SHA256. This setting should match on both the server and the client + + + LABEL_HMAC + HMAC algorithm + + + DESC_CIPHER + The cipher used for your data channel for openvpn. The default is to use the insecure BlowFish algorithm. We suggest you the AES-128-CBC or higher. This setting should match on both the server and the client. + + + LABEL_CIPHER + Cipher encryption algorithm + + + LINK + Link status + + + UP + Up + + + SYSTEMD_RETURNED + Systemd returned service as + + + CHANGEME_INSECURE + Please change this insecure parameter + + + SUGGESTED + Nilai sekarang + + + DEFAULT + Default + + + ERROR + Kesalahan + + --- smeserver-openvpn-bridge-2.1/root/etc/e-smith/locale/it/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:13:07.197262758 +0200 +++ smeserver-openvpn-bridge-2.1.update/root/etc/e-smith/locale/it/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:33:05.649467682 +0200 @@ -6,7 +6,7 @@ DESC_FIRST_PAGE - Bridged mode allows VPN clients to have an IP address in the local network, thus, they have access to every ressources of your local network.

]]> + La modalità Bridged consente ai client VPN di ottenere un indirizzo IP sulla rete locale, garantendo così l'accesso a tutte le risorse della rete locale.

]]> @@ -51,12 +51,12 @@ CRT_CONFIG_ERROR - There's a problem with the configuration of your certificates, you should check it.]]> + Si è verificato un problema dei tuoi certificati; controllali.]]> CRT_CONFIG_OK - Certificates are ready]]> + I certificati sono pronti]]> @@ -71,17 +71,17 @@ DESC_RULES_PAGE - - Give him a fixed IP address
- Configure the gateway redirection
- Temporarily denied the access
]]> + - Assegnare un indirizzo IP fisso
- Configurare il reindirizzamento del gateway
- Negare temporaneamente l'accesso
]]> DESC_RULES - Actual rules]]> + Regole effettive]]> NO_RULE NO_RULE - There's no rule]]> + Non ci sono regole]]> @@ -151,7 +151,7 @@ DESC_ADD_OR_MODIFY_PAGE - Create or modify]]> + Crea o modifica]]> @@ -176,7 +176,7 @@ DESC_GW_REDIRECTION - Warning: enabling this option can slow down your internet access (for both your client and your local networks)]]> + Attenzione: l'abilitazione di questa opzione può rallentare la velocità di connessione ad internet (sia per i client che per le reti locali)]]> @@ -191,12 +191,12 @@ DESC_REMOVE_PAGE - You are about to remove the following rule:]]> + Si sta per eliminare la seguente regola:]]> DESC_CONNECTED_CLIENTS_PAGE - + @@ -206,12 +206,12 @@ ERROR_CONNECT_TO_MANAGER - An error occured while connecting to the manager. Check the service is running.]]> + Si è verificato un errore nell'apertura della pagina di configurazione. Verificare che il servizio sia attivo.]]> NO_CLIENTS_CONNECTED - There's no client connected at this time.]]> + Al momento non ci sono client connessi.]]> @@ -251,7 +251,7 @@ DESC_CRT_CONFIG_PAGE - - An authoritative certificate (CA). This certificate is used to check the clients certificates
- A server certificate. It will be presented to the client so they are sure they are connecting to your server
- The secret key associated with the server certificate
- A Diffie-Helman parameter file. It will allow dynamic key exchange
- A shared secret key. This key will allow an additional TLS authentication
]]> + - Un certificato di autenticazione (CA). Il certificati viene utilizzato per verificare i certificati dei client
- Un certificato server. Il certificato viene esibito ai client per assicurare che la connessione viene stabilita con il server corretto.
- La chiave segreta associata con il certificato del server
- Un file di parametri Diffie-Helman. Consentirà un cambio dinamico della chiave
- Una chiave segreta condivisa. Questa chiave consente un'autenticazione TLS aggiuntiva
]]> @@ -276,7 +276,7 @@ DESC_TA_PEM - Introdurre la chiave condivisa statica. La chiave verrà utilizzata per un'autenticazione aggiuntiva. La chiave è facoltativa ma può migliorare la sicurezza. + Introdurre la chiave statica condivisa. La chiave verrà utilizzata per un'autenticazione aggiuntiva. La chiave è facoltativa ma può migliorare la sicurezza. @@ -301,7 +301,7 @@ DESC_DISPLAY_CLIENT_CONF - You also have to download the certification file in # PKCS12 format (which contains the CA certificate, the user certificate and the user secret key).
]]> + Deve anche essere scaricato il file di certificazione in formato # PKCS12 (che contiene il certificato CA, il certificato utente e la chiave segreta).
]]> @@ -362,7 +362,7 @@ BRIDGE_NOT_ENABLED - The bridge service must be enabled.
The following commands will enable it:
db configuration setprop bridge status enabled
/etc/init.d/bridge start

]]> + Il servizio "bridge" deve essere abilitato.
Il comandi per abilitarlo sono i seguenti:
db configuration setprop bridge status enabled
/etc/init.d/bridge start

]]> @@ -404,4 +404,49 @@ LABEL_TA_PEM Chiave statica + + DESC_HMAC + HMAC fa parte della crittografia del canale dati per openvpn (dove viaggiano i dati) dopo la crittografia con il cipher. L'impostazione predefinita è SHA1 insicuro, ti consigliamo di utilizzare almeno SHA256. Questa impostazione dovrebbe corrispondere sia sul server che sul client + + + LABEL_HMAC + Algoritmo HMAC + + + DESC_CIPHER + Il cipher utilizzato per il tuo canale dati per openvpn. L'impostazione predefinita è utilizzare l'algoritmo BlowFish insicuro. Ti consigliamo AES-128-CBC o superiore. Questa impostazione dovrebbe corrispondere sia sul server che sul client. + + + LABEL_CIPHER + Algoritmo di crittografia Cipher + + + LINK + Staus del link + + + UP + Up + + + SYSTEMD_RETURNED + Systemd restituisce il servizio come + + + CHANGEME_INSECURE + Per favore cambia questo parametro insicuro + + + SUGGESTED + Valore suggerito + + + DEFAULT + Default + + + ERROR + Errore + + --- smeserver-openvpn-bridge-2.1/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:13:07.198262720 +0200 +++ smeserver-openvpn-bridge-2.1.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:33:05.770463050 +0200 @@ -221,7 +221,7 @@ DESC_STATUS - Do you want to enable the service ? + Do you want to enable the service? @@ -347,7 +347,7 @@ DESC_CLIENT_DISCONECT_PAGE - Your are going to diconnect this user. Are you sure you want to continue ? + You are going to diconnect this user. Are you sure you want to continue? @@ -404,4 +404,49 @@ LABEL_TA_PEM Static key + + DESC_HMAC + HMAC is part of the encryption of the data channel for openvpn (where your data travel) after encryption with the cipher. Default is the insecure SHA1, we suggest you to at least use SHA256. This setting should match on both the server and the client + + + LABEL_HMAC + HMAC algorithm + + + DESC_CIPHER + The cipher used for your data channel for openvpn. The default is to use the insecure BlowFish algorithm. We suggest you the AES-128-CBC or higher. This setting should match on both the server and the client. + + + LABEL_CIPHER + Cipher encryption algorithm + + + LINK + Link status + + + UP + Up + + + SYSTEMD_RETURNED + Systemd returned service as + + + CHANGEME_INSECURE + Please change this insecure parameter + + + SUGGESTED + 現在の値 + + + DEFAULT + デフォルト + + + ERROR + エラー + + --- smeserver-openvpn-bridge-2.1/root/etc/e-smith/locale/nb/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:13:07.198262720 +0200 +++ smeserver-openvpn-bridge-2.1.update/root/etc/e-smith/locale/nb/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:33:05.893458343 +0200 @@ -221,7 +221,7 @@ DESC_STATUS - Do you want to enable the service ? + Do you want to enable the service? @@ -347,7 +347,7 @@ DESC_CLIENT_DISCONECT_PAGE - Your are going to diconnect this user. Are you sure you want to continue ? + Er du sikker på at du vil fortsette? ]]> @@ -404,4 +404,49 @@ LABEL_TA_PEM Static key + + DESC_HMAC + HMAC is part of the encryption of the data channel for openvpn (where your data travel) after encryption with the cipher. Default is the insecure SHA1, we suggest you to at least use SHA256. This setting should match on both the server and the client + + + LABEL_HMAC + HMAC algorithm + + + DESC_CIPHER + The cipher used for your data channel for openvpn. The default is to use the insecure BlowFish algorithm. We suggest you the AES-128-CBC or higher. This setting should match on both the server and the client. + + + LABEL_CIPHER + Cipher encryption algorithm + + + LINK + Link status + + + UP + Up + + + SYSTEMD_RETURNED + Systemd returned service as + + + CHANGEME_INSECURE + Please change this insecure parameter + + + SUGGESTED + Gjeldende verdi + + + DEFAULT + Standard + + + ERROR + Feil + + --- smeserver-openvpn-bridge-2.1/root/etc/e-smith/locale/nl/etc/e-smith/web/functions/openvpnbridge 2013-11-11 18:27:02.000000000 +0100 +++ smeserver-openvpn-bridge-2.1.update/root/etc/e-smith/locale/nl/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:33:06.016453638 +0200 @@ -404,4 +404,49 @@ LABEL_TA_PEM Statische sleutel + + DESC_HMAC + HMAC is part of the encryption of the data channel for openvpn (where your data travel) after encryption with the cipher. Default is the insecure SHA1, we suggest you to at least use SHA256. This setting should match on both the server and the client + + + LABEL_HMAC + HMAC algorithm + + + DESC_CIPHER + The cipher used for your data channel for openvpn. The default is to use the insecure BlowFish algorithm. We suggest you the AES-128-CBC or higher. This setting should match on both the server and the client. + + + LABEL_CIPHER + Cipher encryption algorithm + + + LINK + Login Status + + + UP + Up + + + SYSTEMD_RETURNED + Systeem diensten + + + CHANGEME_INSECURE + Please change this insecure parameter + + + SUGGESTED + Huidige waarde + + + DEFAULT + Standaard + + + ERROR + Fout + + --- smeserver-openvpn-bridge-2.1/root/etc/e-smith/locale/pl/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:13:07.204262491 +0200 +++ smeserver-openvpn-bridge-2.1.update/root/etc/e-smith/locale/pl/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:33:06.144448739 +0200 @@ -221,7 +221,7 @@ DESC_STATUS - Do you want to enable the service ? + Czy chcesz uruchomić ten test? @@ -347,7 +347,7 @@ DESC_CLIENT_DISCONECT_PAGE - Your are going to diconnect this user. Are you sure you want to continue ? + You are going to diconnect this user. Are you sure you want to continue? @@ -404,4 +404,49 @@ LABEL_TA_PEM Static key + + DESC_HMAC + HMAC is part of the encryption of the data channel for openvpn (where your data travel) after encryption with the cipher. Default is the insecure SHA1, we suggest you to at least use SHA256. This setting should match on both the server and the client + + + LABEL_HMAC + HMAC algorithm + + + DESC_CIPHER + The cipher used for your data channel for openvpn. The default is to use the insecure BlowFish algorithm. We suggest you the AES-128-CBC or higher. This setting should match on both the server and the client. + + + LABEL_CIPHER + Cipher encryption algorithm + + + LINK + status logowania + + + UP + Up + + + SYSTEMD_RETURNED + Systemd returned service as + + + CHANGEME_INSECURE + Please change this insecure parameter + + + SUGGESTED + Wartość Obecna + + + DEFAULT + Domyślnie + + + ERROR + Błąd + + --- smeserver-openvpn-bridge-2.1/root/etc/e-smith/locale/pt/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:13:07.198262720 +0200 +++ smeserver-openvpn-bridge-2.1.update/root/etc/e-smith/locale/pt/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:33:06.268443993 +0200 @@ -221,7 +221,7 @@ DESC_STATUS - Do you want to enable the service ? + Você deseja encaminhar estes e-mails ? @@ -347,7 +347,7 @@ DESC_CLIENT_DISCONECT_PAGE - Your are going to diconnect this user. Are you sure you want to continue ? + Você tem certeza que deseja continuar? ]]> @@ -404,4 +404,49 @@ LABEL_TA_PEM Static key + + DESC_HMAC + HMAC is part of the encryption of the data channel for openvpn (where your data travel) after encryption with the cipher. Default is the insecure SHA1, we suggest you to at least use SHA256. This setting should match on both the server and the client + + + LABEL_HMAC + HMAC algorithm + + + DESC_CIPHER + The cipher used for your data channel for openvpn. The default is to use the insecure BlowFish algorithm. We suggest you the AES-128-CBC or higher. This setting should match on both the server and the client. + + + LABEL_CIPHER + Cipher encryption algorithm + + + LINK + status do login + + + UP + Up + + + SYSTEMD_RETURNED + Systemd returned service as + + + CHANGEME_INSECURE + Please change this insecure parameter + + + SUGGESTED + Valor actual + + + DEFAULT + Padrão + + + ERROR + Erro + + --- smeserver-openvpn-bridge-2.1/root/etc/e-smith/locale/pt-br/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:13:07.198262720 +0200 +++ smeserver-openvpn-bridge-2.1.update/root/etc/e-smith/locale/pt-br/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:33:06.387439439 +0200 @@ -404,4 +404,49 @@ LABEL_TA_PEM Chave estática + + DESC_HMAC + HMAC is part of the encryption of the data channel for openvpn (where your data travel) after encryption with the cipher. Default is the insecure SHA1, we suggest you to at least use SHA256. This setting should match on both the server and the client + + + LABEL_HMAC + HMAC algorithm + + + DESC_CIPHER + The cipher used for your data channel for openvpn. The default is to use the insecure BlowFish algorithm. We suggest you the AES-128-CBC or higher. This setting should match on both the server and the client. + + + LABEL_CIPHER + Cipher encryption algorithm + + + LINK + status do login + + + UP + Up + + + SYSTEMD_RETURNED + Systemd returned service as + + + CHANGEME_INSECURE + Please change this insecure parameter + + + SUGGESTED + Valor atual + + + DEFAULT + Padrão + + + ERROR + Erro + + --- smeserver-openvpn-bridge-2.1/root/etc/e-smith/locale/ro/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:13:07.199262682 +0200 +++ smeserver-openvpn-bridge-2.1.update/root/etc/e-smith/locale/ro/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:33:06.516434502 +0200 @@ -221,7 +221,7 @@ DESC_STATUS - Do you want to enable the service ? + Vreți sa retransmiteți aceste mailuri? @@ -347,7 +347,7 @@ DESC_CLIENT_DISCONECT_PAGE - Your are going to diconnect this user. Are you sure you want to continue ? + You are going to diconnect this user. Are you sure you want to continue? @@ -404,4 +404,49 @@ LABEL_TA_PEM Static key + + DESC_HMAC + HMAC is part of the encryption of the data channel for openvpn (where your data travel) after encryption with the cipher. Default is the insecure SHA1, we suggest you to at least use SHA256. This setting should match on both the server and the client + + + LABEL_HMAC + HMAC algorithm + + + DESC_CIPHER + The cipher used for your data channel for openvpn. The default is to use the insecure BlowFish algorithm. We suggest you the AES-128-CBC or higher. This setting should match on both the server and the client. + + + LABEL_CIPHER + Cipher encryption algorithm + + + LINK + Link status + + + UP + Up + + + SYSTEMD_RETURNED + Systemd returned service as + + + CHANGEME_INSECURE + Please change this insecure parameter + + + SUGGESTED + Valoare curentă + + + DEFAULT + Implicit + + + ERROR + Eroare + + --- smeserver-openvpn-bridge-2.1/root/etc/e-smith/locale/ru/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:13:07.199262682 +0200 +++ smeserver-openvpn-bridge-2.1.update/root/etc/e-smith/locale/ru/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:33:06.642429680 +0200 @@ -347,7 +347,7 @@ DESC_CLIENT_DISCONECT_PAGE - Your are going to diconnect this user. Are you sure you want to continue ? + Вы действительно хотите продолжить? ]]> @@ -404,4 +404,49 @@ LABEL_TA_PEM Статический ключ + + DESC_HMAC + HMAC is part of the encryption of the data channel for openvpn (where your data travel) after encryption with the cipher. Default is the insecure SHA1, we suggest you to at least use SHA256. This setting should match on both the server and the client + + + LABEL_HMAC + HMAC algorithm + + + DESC_CIPHER + The cipher used for your data channel for openvpn. The default is to use the insecure BlowFish algorithm. We suggest you the AES-128-CBC or higher. This setting should match on both the server and the client. + + + LABEL_CIPHER + Cipher encryption algorithm + + + LINK + статус логина + + + UP + Up + + + SYSTEMD_RETURNED + Systemd returned service as + + + CHANGEME_INSECURE + Please change this insecure parameter + + + SUGGESTED + Текущее значение + + + DEFAULT + По умолчанию + + + ERROR + Ошибка + + --- smeserver-openvpn-bridge-2.1/root/etc/e-smith/locale/sl/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:13:07.199262682 +0200 +++ smeserver-openvpn-bridge-2.1.update/root/etc/e-smith/locale/sl/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:33:06.760425164 +0200 @@ -221,7 +221,7 @@ DESC_STATUS - Do you want to enable the service ? + Do you want to enable the service? @@ -347,7 +347,7 @@ DESC_CLIENT_DISCONECT_PAGE - Your are going to diconnect this user. Are you sure you want to continue ? + Ali si preprican, da to zelis? ]]> @@ -404,4 +404,49 @@ LABEL_TA_PEM Static key + + DESC_HMAC + HMAC is part of the encryption of the data channel for openvpn (where your data travel) after encryption with the cipher. Default is the insecure SHA1, we suggest you to at least use SHA256. This setting should match on both the server and the client + + + LABEL_HMAC + HMAC algorithm + + + DESC_CIPHER + The cipher used for your data channel for openvpn. The default is to use the insecure BlowFish algorithm. We suggest you the AES-128-CBC or higher. This setting should match on both the server and the client. + + + LABEL_CIPHER + Cipher encryption algorithm + + + LINK + Status + + + UP + Up + + + SYSTEMD_RETURNED + Systemd returned service as + + + CHANGEME_INSECURE + Please change this insecure parameter + + + SUGGESTED + Trenutna vrednost + + + DEFAULT + Privzeto + + + ERROR + Napaka + + --- smeserver-openvpn-bridge-2.1/root/etc/e-smith/locale/sv/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:13:07.199262682 +0200 +++ smeserver-openvpn-bridge-2.1.update/root/etc/e-smith/locale/sv/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:33:06.880420573 +0200 @@ -404,4 +404,49 @@ LABEL_TA_PEM Statisk nyckel + + DESC_HMAC + HMAC is part of the encryption of the data channel for openvpn (where your data travel) after encryption with the cipher. Default is the insecure SHA1, we suggest you to at least use SHA256. This setting should match on both the server and the client + + + LABEL_HMAC + HMAC algorithm + + + DESC_CIPHER + The cipher used for your data channel for openvpn. The default is to use the insecure BlowFish algorithm. We suggest you the AES-128-CBC or higher. This setting should match on both the server and the client. + + + LABEL_CIPHER + Cipher encryption algorithm + + + LINK + inloggningsstatus + + + UP + Up + + + SYSTEMD_RETURNED + Systemtjänster + + + CHANGEME_INSECURE + Please change this insecure parameter + + + SUGGESTED + Aktuellt värde + + + DEFAULT + Förvalt + + + ERROR + Fel + + --- smeserver-openvpn-bridge-2.1/root/etc/e-smith/locale/th/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:13:07.199262682 +0200 +++ smeserver-openvpn-bridge-2.1.update/root/etc/e-smith/locale/th/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:33:06.991416326 +0200 @@ -221,7 +221,7 @@ DESC_STATUS - Do you want to enable the service ? + Do you want to enable the service? @@ -347,7 +347,7 @@ DESC_CLIENT_DISCONECT_PAGE - Your are going to diconnect this user. Are you sure you want to continue ? + คุณแน่ใจที่จะทำการลบนี้หรือไม่ ? ]]> @@ -404,4 +404,49 @@ LABEL_TA_PEM Static key + + DESC_HMAC + HMAC is part of the encryption of the data channel for openvpn (where your data travel) after encryption with the cipher. Default is the insecure SHA1, we suggest you to at least use SHA256. This setting should match on both the server and the client + + + LABEL_HMAC + HMAC algorithm + + + DESC_CIPHER + The cipher used for your data channel for openvpn. The default is to use the insecure BlowFish algorithm. We suggest you the AES-128-CBC or higher. This setting should match on both the server and the client. + + + LABEL_CIPHER + Cipher encryption algorithm + + + LINK + Link status + + + UP + Up + + + SYSTEMD_RETURNED + Systemd returned service as + + + CHANGEME_INSECURE + Please change this insecure parameter + + + SUGGESTED + ค่าปัจจุบัน + + + DEFAULT + ค่าปริยาย + + + ERROR + ข้อผิดพลาด + + --- smeserver-openvpn-bridge-2.1/root/etc/e-smith/locale/tr/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:13:07.199262682 +0200 +++ smeserver-openvpn-bridge-2.1.update/root/etc/e-smith/locale/tr/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:33:07.112411693 +0200 @@ -221,7 +221,7 @@ DESC_STATUS - Do you want to enable the service ? + Do you want to enable the service? @@ -347,7 +347,7 @@ DESC_CLIENT_DISCONECT_PAGE - Your are going to diconnect this user. Are you sure you want to continue ? + Devam etmek istediğinizden eminmisiniz? ]]> @@ -404,4 +404,49 @@ LABEL_TA_PEM Static key + + DESC_HMAC + HMAC is part of the encryption of the data channel for openvpn (where your data travel) after encryption with the cipher. Default is the insecure SHA1, we suggest you to at least use SHA256. This setting should match on both the server and the client + + + LABEL_HMAC + algoritma + + + DESC_CIPHER + The cipher used for your data channel for openvpn. The default is to use the insecure BlowFish algorithm. We suggest you the AES-128-CBC or higher. This setting should match on both the server and the client. + + + LABEL_CIPHER + Cipher encryption algorithm + + + LINK + oturum durumu + + + UP + Up + + + SYSTEMD_RETURNED + Systemd returned service as + + + CHANGEME_INSECURE + Please change this insecure parameter + + + SUGGESTED + Güncel değer + + + DEFAULT + Varsayılan + + + ERROR + Hata + + --- smeserver-openvpn-bridge-2.1/root/etc/e-smith/locale/zh-cn/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:13:07.200262644 +0200 +++ smeserver-openvpn-bridge-2.1.update/root/etc/e-smith/locale/zh-cn/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:33:07.228407255 +0200 @@ -404,4 +404,49 @@ LABEL_TA_PEM Static key + + DESC_HMAC + HMAC is part of the encryption of the data channel for openvpn (where your data travel) after encryption with the cipher. Default is the insecure SHA1, we suggest you to at least use SHA256. This setting should match on both the server and the client + + + LABEL_HMAC + HMAC algorithm + + + DESC_CIPHER + The cipher used for your data channel for openvpn. The default is to use the insecure BlowFish algorithm. We suggest you the AES-128-CBC or higher. This setting should match on both the server and the client. + + + LABEL_CIPHER + Cipher encryption algorithm + + + LINK + mailman状态 + + + UP + Up + + + SYSTEMD_RETURNED + Systemd returned service as + + + CHANGEME_INSECURE + Please change this insecure parameter + + + SUGGESTED + 当前值 + + + DEFAULT + 默认 + + + ERROR + 错误 + + --- smeserver-openvpn-bridge-2.1/root/etc/e-smith/locale/zh-tw/etc/e-smith/web/functions/openvpnbridge 2013-11-11 18:27:02.000000000 +0100 +++ smeserver-openvpn-bridge-2.1.update/root/etc/e-smith/locale/zh-tw/etc/e-smith/web/functions/openvpnbridge 2021-08-23 02:33:07.348402663 +0200 @@ -404,4 +404,49 @@ LABEL_TA_PEM 靜態金鑰 + + DESC_HMAC + HMAC is part of the encryption of the data channel for openvpn (where your data travel) after encryption with the cipher. Default is the insecure SHA1, we suggest you to at least use SHA256. This setting should match on both the server and the client + + + LABEL_HMAC + HMAC algorithm + + + DESC_CIPHER + The cipher used for your data channel for openvpn. The default is to use the insecure BlowFish algorithm. We suggest you the AES-128-CBC or higher. This setting should match on both the server and the client. + + + LABEL_CIPHER + Cipher encryption algorithm + + + LINK + Mailman狀態 + + + UP + Up + + + SYSTEMD_RETURNED + Systemd returned service as + + + CHANGEME_INSECURE + Please change this insecure parameter + + + SUGGESTED + 現值 + + + DEFAULT + 預設 + + + ERROR + 錯誤 + +