--- smeserver-openvpn-bridge-2.0/root/etc/e-smith/locale/it/etc/e-smith/web/functions/openvpnbridge 2009-10-21 00:09:44.000000000 -0600
+++ smeserver-openvpn-bridge-2.0.update/root/etc/e-smith/locale/it/etc/e-smith/web/functions/openvpnbridge 2009-10-21 00:22:07.000000000 -0600
@@ -342,7 +342,7 @@
CANCELED
- Cancelled
+ Cancellata
--- smeserver-openvpn-bridge-2.0/root/etc/e-smith/locale/pt-br/etc/e-smith/web/functions/openvpnbridge 2009-10-21 00:09:44.000000000 -0600
+++ smeserver-openvpn-bridge-2.0.update/root/etc/e-smith/locale/pt-br/etc/e-smith/web/functions/openvpnbridge 2009-10-21 00:22:09.000000000 -0600
@@ -301,7 +301,7 @@
DESC_DISPLAY_CLIENT_CONF
- Você também deve baixar o arquivo de certificação no formato # PKCS12 (o qual contém o certificado CA, o certificado do usuário e a chave secreta do usuário).
]]>
+ Você também deve baixar o arquivo de certificação no formato # PKCS12 (o qual contém o certificado CA, o certificado do usuário e a chave secreta do usuário).
]]>
--- smeserver-openvpn-bridge-2.0/root/etc/e-smith/locale/th/etc/e-smith/web/functions/openvpnbridge 1969-12-31 17:00:00.000000000 -0700
+++ smeserver-openvpn-bridge-2.0.update/root/etc/e-smith/locale/th/etc/e-smith/web/functions/openvpnbridge 2009-10-21 00:22:11.000000000 -0600
@@ -0,0 +1,407 @@
+
+
+ FORM_TITLE
+ Bridged OpenVPN daemon configuration
+
+
+
+ DESC_FIRST_PAGE
+ Bridged mode allows VPN clients to have an IP address in the local network, thus, they have access to every ressources of your local network.
]]>
+
+
+
+ LABEL_STATUS
+ Service Status
+
+
+
+ LABEL_AUTH_TYPE
+ Authentication mode
+
+
+
+ LABEL_IP_POOL
+ IP Address range
+
+
+
+ DESC_RULE_BUTTON
+ Configuration rules management
+
+
+
+ DESC_SHOW_CLIENTS_BUTTON
+ Display connected clients
+
+
+
+ DESC_CONFIG_BUTTON
+ Service configuration
+
+
+
+ DESC_CRT_CONFIG_BUTTON
+ Certificates configuration
+
+
+
+ LABEL_CRT_STATUS
+ Certificates status
+
+
+
+ CRT_CONFIG_ERROR
+ There's a problem with the configuration of your certificates, you should check it.]]>
+
+
+
+ CRT_CONFIG_OK
+ Certificates are ready]]>
+
+
+
+ CRT_ONLY
+ Certificate only
+
+
+
+ CRT_WITH_PASS
+ Certificate and login/password
+
+
+
+ DESC_RULES_PAGE
+ - Give him a fixed IP address
- Configure the gateway redirection
- Temporarily denied the access
]]>
+
+
+
+ DESC_RULES
+ Actual rules]]>
+
+NO_RULE
+
+ NO_RULE
+ There's no rule]]>
+
+
+
+ DESC_ADD_RULE_BUTTON
+ Add a rule
+
+
+
+ COMMON_NAME
+ Common Name
+
+
+
+ IP_ADDRESS
+ IP Address
+
+
+
+ COMMENT
+ Comment
+
+
+
+ GATEWAY_REDIRECTION
+ Gateway Redirection
+
+
+
+ ACCESS
+ Access
+
+
+
+ MODIFY
+ Modify
+
+
+
+ REMOVE
+ Remove
+
+
+
+ DYNAMIC
+ Dynamic
+
+
+
+ ENABLED
+ Enabled
+
+
+
+ DISABLED
+ Disabled
+
+
+
+ ALLOWED
+ Allowed
+
+
+
+ DENIED
+ Denied
+
+
+
+ DESC_ADD_OR_MODIFY_PAGE
+ Create or modify]]>
+
+
+
+ DESC_COMMON_NAME
+ Enter a common name. If a client connects with a certificates which has this common name, the coresponding configuration will be applied.
+
+
+
+ DESC_COMMENT
+ Enter a comment (Optional)
+
+
+
+ DESC_RESERVED_IP
+ If you enter an IP address, it will allways be affected to the client connecting with this certificate. This IP address must be in your local network (but can be out of the VPN range). Be sure this IP isn't used by another host on your network.
+
+
+
+ LABEL_RESERVED_IP
+ Reserved IP Address
+
+
+
+ DESC_GW_REDIRECTION
+ Warning: enabling this option can slow down your internet access (for both your client and your local networks)]]>
+
+
+
+ LABEL_GW_REDIRECTION
+ Gateway redirection
+
+
+
+ DESC_ACCESS
+ You can temporarily block a client. This does not offer a strong security. If you want to permanently deny a client, you should revoke it's certificate.
+
+
+
+ DESC_REMOVE_PAGE
+ You are about to remove the following rule:]]>
+
+
+
+ DESC_CONNECTED_CLIENTS_PAGE
+
+
+
+
+ REFRESH
+ Refresh
+
+
+
+ ERROR_CONNECT_TO_MANAGER
+ An error occured while connecting to the manager. Check the service is running.]]>
+
+
+
+ NO_CLIENTS_CONNECTED
+ There's no client connected at this time.]]>
+
+
+
+ DESC_CONFIG_PAGE
+ This page lets you configure the service
+
+
+
+ DESC_STATUS
+ Do you want to enable the service ?
+
+
+
+ DESC_AUTH_TYPE
+ Choose the authentication mode. "Certificate only" can be usefull if you need to connect hosts without humain intervention, but it does't provide the same level of security that "Certificate and login/password" provides
+
+
+
+ DESC_START_POOL
+ You have to choose a IP address range for VPN clients. This range must be in the local network. Please, check that none IP address in this range is used by another host. Enter the first IP Address
+
+
+
+ LABEL_START_POOL
+ First IP Address
+
+
+
+ DESC_END_POOL
+ Enter the last IP Address
+
+
+
+ LABEL_END_POOL
+ Last IP Address
+
+
+
+ DESC_CRT_CONFIG_PAGE
+ - An authoritative certificate (CA). This certificate is used to check the clients certificates
- A server certificate. It will be presented to the client so they are sure they are connecting to your server
- The secret key associated with the server certificate
- A Diffie-Helman parameter file. It will allow dynamic key exchange
- A shared secret key. This key will allow an additionnal TLS authentication
]]>
+
+
+
+ DESC_CA_PEM
+ Enter the master certificate in pem format
+
+
+
+ DESC_CRT_PEM
+ Enter the server certificate in pem format
+
+
+
+ DESC_KEY_PEM
+ Enter the secret key associated with the server certificate, in pem format
+
+
+
+ DESC_DH_PEM
+ Enter Diffie-Helman parameters
+
+
+
+ DESC_TA_PEM
+ Enter the static shared key. This key will be used for an additionnal authentication. This key is optionnal, but it can harden the security
+
+
+
+ SUCCESS
+ The new settings have been saved
+
+
+
+ NOT_A_VALID_IP
+ You have to enter a valid IP number
+
+
+
+ NOT_IN_LOCAL_NET
+ You have to enter an IP address in your local network
+
+
+
+ SHOW_SAMPLE_CONFIG
+ Display a functional client configuration file
+
+
+
+ DESC_DISPLAY_CLIENT_CONF
+ You also have to download the certification file in # PKCS12 format (which contains the CA certificate, the user certificate and the user secret key).
]]>
+
+
+
+ REAL_IP
+ Real IP address
+
+
+
+ VIRTUAL_IP
+ VPN IP address
+
+
+
+ SENT
+ Bytes sent
+
+
+
+ RECEIVED
+ Bytes received
+
+
+
+ CONNECTED_SINCE
+ Connected since
+
+
+
+ DISCONNECT
+ Disconnect
+
+
+
+ BAD_VALUE
+ Incorrect value
+
+
+
+
+ CANCELED
+ Cancelled
+
+
+
+ DESC_CLIENT_DISCONECT_PAGE
+ Your are going to diconnect this user. Are you sure you want to continue ?
+
+
+
+ CLIENT_DISCONNECTED
+ The client has been disconnected
+
+
+
+ INVALID_CHARS
+ "{$string}" contains forbiden characters
+
+
+
+ BRIDGE_NOT_ENABLED
+ The bridge service must be enabled.
The following commands will enable it:
db configuration setprop bridge status enabled
/etc/init.d/bridge start
]]>
+
+
+
+ NOT_A_VALID_URL
+ "{$string}" isn't a valid URL
+
+
+
+ DESC_CRL_URL
+ Enter the URL to update the CRL. (if phpki runs on the same server, you can let the default value)
+
+
+
+ LABEL_CRL_URL
+ URL to update the CRL
+
+
+
+ LABEL_CA_PEM
+ CA certificate
+
+
+
+ LABEL_CRT_PEM
+ Server certificate
+
+
+
+ LABEL_KEY_PEM
+ Server private key
+
+
+
+ LABEL_DH_PEM
+ DH parameters
+
+
+
+ LABEL_TA_PEM
+ Static key
+
+