smeserver-openvpn-bridge/contribs8/smeserver-openvpn-bridge-2.0-remove_obsolete_init_scripts.patch

diff -Nur -x '*.orig' -x '*.rej' smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/openvpn-bridge mezzanine_patched_smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/openvpn-bridge
--- smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/openvpn-bridge    2008-09-02 23:13:34.000000000 +0200
+++ mezzanine_patched_smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/openvpn-bridge  1970-01-01 01:00:00.000000000 +0100
@@ -1,239 +0,0 @@
-#!/bin/sh
-#
-# openvpn       This shell script takes care of starting and stopping
-#               openvpn on RedHat or other chkconfig-based system.
-#
-# chkconfig: 345 24 76
-#
-# description: OpenVPN is a robust and highly flexible tunneling application that
-#              uses all of the encryption, authentication, and certification features
-#              of the OpenSSL library to securely tunnel IP networks over a single
-#              UDP port.
-#
-
-# Contributed to the OpenVPN project by
-# Douglas Keller <doug@voidstar.dyndns.org>
-# 2002.05.15
-
-# To install:
-#   copy this file to /etc/rc.d/init.d/openvpn
-#   shell> chkconfig --add openvpn
-#   shell> mkdir /etc/openvpn
-#   make .conf or .sh files in /etc/openvpn (see below)
-
-# To uninstall:
-#   run: chkconfig --del openvpn
-
-# Author's Notes:
-#
-# I have created an /etc/init.d init script and enhanced openvpn.spec to
-# automatically register the init script.  Once the RPM is installed you
-# can start and stop OpenVPN with "service openvpn start" and "service
-# openvpn stop".
-#
-# The init script does the following:
-#
-# - Starts an openvpn process for each .conf file it finds in
-#   /etc/openvpn.
-#
-# - If /etc/openvpn/xxx.sh exists for a xxx.conf file then it executes
-#   it before starting openvpn (useful for doing openvpn --mktun...).
-#
-# - In addition to start/stop you can do:
-#
-#   service openvpn reload - SIGHUP
-#   service openvpn reopen - SIGUSR1
-#   service openvpn status - SIGUSR2
-#
-# Modifications:
-#
-# 2003.05.02
-#   * Changed == to = for sh compliance (Bishop Clark).
-#   * If condrestart|reload|reopen|status, check that we were
-#     actually started (James Yonan).
-#   * Added lock, piddir, and work variables (James Yonan).
-#   * If start is attempted twice, without an intervening stop, or
-#     if start is attempted when previous start was not properly
-#     shut down, then kill any previously started processes, before
-#     commencing new start operation (James Yonan).
-#   * Do a better job of flagging errors on start, and properly
-#     returning success or failure status to caller (James Yonan).
-#
-# 2005.04.04
-#   * Added openvpn-startup and openvpn-shutdown script calls
-#     (James Yonan).
-#
-
-# Location of openvpn binary
-openvpn=""
-openvpn_locations="/usr/sbin/openvpn /usr/local/sbin/openvpn"
-for location in $openvpn_locations
-do
-  if [ -f "$location" ]
-  then
-    openvpn=$location
-  fi
-done
-
-# configuration file
-conf=server-bridge
-
-# Lockfile
-lock="/var/lock/subsys/openvpn-bridge"
-
-# PID directory
-piddir="/var/run/openvpn"
-
-# Our working directory
-work=/etc/openvpn
-
-# Source function library.
-. /etc/rc.d/init.d/functions
-
-# Source networking configuration.
-. /etc/sysconfig/network
-
-# Check that networking is up.
-if [ ${NETWORKING} = "no" ]
-then
-  echo "Networking is down"
-  exit 0
-fi
-
-# Check that binary exists
-if ! [ -f  $openvpn ] 
-then
-  echo "openvpn binary not found"
-  exit 0
-fi
-
-# See how we were called.
-case "$1" in
-  start)
-       echo -n $"Starting openvpn: "
-
-       /sbin/modprobe tun >/dev/null 2>&1
-
-       # From a security perspective, I think it makes
-       # sense to remove this, and have users who need
-       # it explictly enable in their --up scripts or
-       # firewall setups.
-
-       #echo 1 > /proc/sys/net/ipv4/ip_forward
-
-       if [ ! -d  $piddir ]; then
-           mkdir $piddir
-       fi
-
-       if [ -f $lock ]; then
-           # we were not shut down correctly
-            if [ -s $piddir/$conf.pid ]; then
-                       kill `cat $piddir/$conf.pid` >/dev/null 2>&1
-            fi
-           rm -f $piddir/$conf.pid
-           rm -f $lock
-           sleep 2
-       fi
-
-       rm -f $piddir/$conf.pid
-       cd $work
-
-       errors=0
-       successes=0
-       
-       # Run startup script, if defined
-       if [ -f $work/$conf.up ]; then
-               $work/$conf.up
-       fi
-
-       rm -f $piddir/$conf.pid
-       $openvpn --daemon --writepid $piddir/$conf.pid --config $work/$conf.ovpn --cd $work
-       if [ $? = 0 ]; then
-               successes=1
-       else
-               errors=1
-       fi
-
-       if [ $errors = 1 ]; then
-           failure; echo
-       else
-           success; echo
-       fi
-
-       if [ $successes = 1 ]; then
-           touch $lock
-       fi
-       ;;
-  stop)
-       echo -n $"Shutting down openvpn: "
-       cd $work
-       # Run shutdown script, if defined
-       if [ -s $piddir/$conf.pid ]; then
-               kill `cat $piddir/$conf.pid` >/dev/null 2>&1
-       fi
-       if [ -f $work/$conf.down ]; then
-           $work/$conf.down
-       fi
-       rm -f $piddir/$conf.pid
-
-       success; echo
-       rm -f $lock
-       ;;
-  restart)
-       $0 stop
-       sleep 2
-       $0 start
-       ;;
-  reload)
-       if [ -f $lock ]; then
-               if [ -s $piddir/$conf.pid ]; then
-                   kill -HUP `cat $piddir/$conf.pid` >/dev/null 2>&1
-               fi
-       else
-           echo "openvpn: service not started"
-           exit 1
-       fi
-       ;;
-  reopen)
-       if [ -f $lock ]; then
-               if [ -s $piddir/$conf.pid ]; then
-                   kill -USR1 `cat $piddir/$conf.pid` >/dev/null 2>&1
-               fi
-       else
-           echo "openvpn: service not started"
-           exit 1
-       fi
-       ;;
-  condrestart)
-       if [ -f $lock ]; then
-           $0 stop
-           # avoid race
-           sleep 2
-           $0 start
-       fi
-       ;;
-  status)
-       if [ -f $lock ]; then
-               if [ -s $piddir/$conf.pid ]; then
-                   kill -USR2 `cat $piddir/$conf.pid` >/dev/null 2>&1
-               fi
-       echo "Status written to /var/log/messages"
-       else
-           echo "openvpn: service not started"
-           exit 1
-       fi
-        ;;
-  adjust)
-       CONF_STATUS=$(/sbin/e-smith/db configuration getprop openvpn-bridge status)
-       $0 stop
-       sleep 2
-       if [ $CONF_STATUS == 'enabled' ]; then
-               $0 start
-       fi
-               ;;
-  *)
-       echo "Usage: openvpn {start|stop|restart|condrestart|reload|reopen|status|adjust}"
-       exit 1
-       ;;
-esac
-exit 0
diff -Nur -x '*.orig' -x '*.rej' smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/reset-openvpn mezzanine_patched_smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/reset-openvpn
--- smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/reset-openvpn     2008-12-02 14:23:04.000000000 +0100
+++ mezzanine_patched_smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/reset-openvpn   1970-01-01 01:00:00.000000000 +0100
@@ -1,7 +0,0 @@
-#!/bin/bash
-####################################
-# Reset SME openvpn configuration after unclean shutdown
-####################################
-eth=$(/sbin/e-smith/db configuration getprop bridge ethernetInterface)
-/sbin/e-smith/db configuration setprop InternalInterface Name $eth
-
1	unnilennium	1.1	diff -Nur -x '.orig' -x '.rej' smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/openvpn-bridge mezzanine_patched_smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/openvpn-bridge
2			--- smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/openvpn-bridge 2008-09-02 23:13:34.000000000 +0200
3			+++ mezzanine_patched_smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/openvpn-bridge 1970-01-01 01:00:00.000000000 +0100
4			@@ -1,239 +0,0 @@
5			-#!/bin/sh
6			-#
7			-# openvpn This shell script takes care of starting and stopping
8			-# openvpn on RedHat or other chkconfig-based system.
9			-#
10			-# chkconfig: 345 24 76
11			-#
12			-# description: OpenVPN is a robust and highly flexible tunneling application that
13			-# uses all of the encryption, authentication, and certification features
14			-# of the OpenSSL library to securely tunnel IP networks over a single
15			-# UDP port.
16			-#
17			-
18			-# Contributed to the OpenVPN project by
19			-# Douglas Keller <doug@voidstar.dyndns.org>
20			-# 2002.05.15
21			-
22			-# To install:
23			-# copy this file to /etc/rc.d/init.d/openvpn
24			-# shell> chkconfig --add openvpn
25			-# shell> mkdir /etc/openvpn
26			-# make .conf or .sh files in /etc/openvpn (see below)
27			-
28			-# To uninstall:
29			-# run: chkconfig --del openvpn
30			-
31			-# Author's Notes:
32			-#
33			-# I have created an /etc/init.d init script and enhanced openvpn.spec to
34			-# automatically register the init script. Once the RPM is installed you
35			-# can start and stop OpenVPN with "service openvpn start" and "service
36			-# openvpn stop".
37			-#
38			-# The init script does the following:
39			-#
40			-# - Starts an openvpn process for each .conf file it finds in
41			-# /etc/openvpn.
42			-#
43			-# - If /etc/openvpn/xxx.sh exists for a xxx.conf file then it executes
44			-# it before starting openvpn (useful for doing openvpn --mktun...).
45			-#
46			-# - In addition to start/stop you can do:
47			-#
48			-# service openvpn reload - SIGHUP
49			-# service openvpn reopen - SIGUSR1
50			-# service openvpn status - SIGUSR2
51			-#
52			-# Modifications:
53			-#
54			-# 2003.05.02
55			-# * Changed == to = for sh compliance (Bishop Clark).
56			-# * If condrestart\|reload\|reopen\|status, check that we were
57			-# actually started (James Yonan).
58			-# * Added lock, piddir, and work variables (James Yonan).
59			-# * If start is attempted twice, without an intervening stop, or
60			-# if start is attempted when previous start was not properly
61			-# shut down, then kill any previously started processes, before
62			-# commencing new start operation (James Yonan).
63			-# * Do a better job of flagging errors on start, and properly
64			-# returning success or failure status to caller (James Yonan).
65			-#
66			-# 2005.04.04
67			-# * Added openvpn-startup and openvpn-shutdown script calls
68			-# (James Yonan).
69			-#
70			-
71			-# Location of openvpn binary
72			-openvpn=""
73			-openvpn_locations="/usr/sbin/openvpn /usr/local/sbin/openvpn"
74			-for location in $openvpn_locations
75			-do
76			- if [ -f "$location" ]
77			- then
78			- openvpn=$location
79			- fi
80			-done
81			-
82			-# configuration file
83			-conf=server-bridge
84			-
85			-# Lockfile
86			-lock="/var/lock/subsys/openvpn-bridge"
87			-
88			-# PID directory
89			-piddir="/var/run/openvpn"
90			-
91			-# Our working directory
92			-work=/etc/openvpn
93			-
94			-# Source function library.
95			-. /etc/rc.d/init.d/functions
96			-
97			-# Source networking configuration.
98			-. /etc/sysconfig/network
99			-
100			-# Check that networking is up.
101			-if [ ${NETWORKING} = "no" ]
102			-then
103			- echo "Networking is down"
104			- exit 0
105			-fi
106			-
107			-# Check that binary exists
108			-if ! [ -f $openvpn ]
109			-then
110			- echo "openvpn binary not found"
111			- exit 0
112			-fi
113			-
114			-# See how we were called.
115			-case "$1" in
116			- start)
117			- echo -n $"Starting openvpn: "
118			-
119			- /sbin/modprobe tun >/dev/null 2>&1
120			-
121			- # From a security perspective, I think it makes
122			- # sense to remove this, and have users who need
123			- # it explictly enable in their --up scripts or
124			- # firewall setups.
125			-
126			- #echo 1 > /proc/sys/net/ipv4/ip_forward
127			-
128			- if [ ! -d $piddir ]; then
129			- mkdir $piddir
130			- fi
131			-
132			- if [ -f $lock ]; then
133			- # we were not shut down correctly
134			- if [ -s $piddir/$conf.pid ]; then
135			- kill `cat $piddir/$conf.pid` >/dev/null 2>&1
136			- fi
137			- rm -f $piddir/$conf.pid
138			- rm -f $lock
139			- sleep 2
140			- fi
141			-
142			- rm -f $piddir/$conf.pid
143			- cd $work
144			-
145			- errors=0
146			- successes=0
147			-
148			- # Run startup script, if defined
149			- if [ -f $work/$conf.up ]; then
150			- $work/$conf.up
151			- fi
152			-
153			- rm -f $piddir/$conf.pid
154			- $openvpn --daemon --writepid $piddir/$conf.pid --config $work/$conf.ovpn --cd $work
155			- if [ $? = 0 ]; then
156			- successes=1
157			- else
158			- errors=1
159			- fi
160			-
161			- if [ $errors = 1 ]; then
162			- failure; echo
163			- else
164			- success; echo
165			- fi
166			-
167			- if [ $successes = 1 ]; then
168			- touch $lock
169			- fi
170			- ;;
171			- stop)
172			- echo -n $"Shutting down openvpn: "
173			- cd $work
174			- # Run shutdown script, if defined
175			- if [ -s $piddir/$conf.pid ]; then
176			- kill `cat $piddir/$conf.pid` >/dev/null 2>&1
177			- fi
178			- if [ -f $work/$conf.down ]; then
179			- $work/$conf.down
180			- fi
181			- rm -f $piddir/$conf.pid
182			-
183			- success; echo
184			- rm -f $lock
185			- ;;
186			- restart)
187			- $0 stop
188			- sleep 2
189			- $0 start
190			- ;;
191			- reload)
192			- if [ -f $lock ]; then
193			- if [ -s $piddir/$conf.pid ]; then
194			- kill -HUP `cat $piddir/$conf.pid` >/dev/null 2>&1
195			- fi
196			- else
197			- echo "openvpn: service not started"
198			- exit 1
199			- fi
200			- ;;
201			- reopen)
202			- if [ -f $lock ]; then
203			- if [ -s $piddir/$conf.pid ]; then
204			- kill -USR1 `cat $piddir/$conf.pid` >/dev/null 2>&1
205			- fi
206			- else
207			- echo "openvpn: service not started"
208			- exit 1
209			- fi
210			- ;;
211			- condrestart)
212			- if [ -f $lock ]; then
213			- $0 stop
214			- # avoid race
215			- sleep 2
216			- $0 start
217			- fi
218			- ;;
219			- status)
220			- if [ -f $lock ]; then
221			- if [ -s $piddir/$conf.pid ]; then
222			- kill -USR2 `cat $piddir/$conf.pid` >/dev/null 2>&1
223			- fi
224			- echo "Status written to /var/log/messages"
225			- else
226			- echo "openvpn: service not started"
227			- exit 1
228			- fi
229			- ;;
230			- adjust)
231			- CONF_STATUS=$(/sbin/e-smith/db configuration getprop openvpn-bridge status)
232			- $0 stop
233			- sleep 2
234			- if [ $CONF_STATUS == 'enabled' ]; then
235			- $0 start
236			- fi
237			- ;;
238			- *)
239			- echo "Usage: openvpn {start\|stop\|restart\|condrestart\|reload\|reopen\|status\|adjust}"
240			- exit 1
241			- ;;
242			-esac
243			-exit 0
244			diff -Nur -x '.orig' -x '.rej' smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/reset-openvpn mezzanine_patched_smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/reset-openvpn
245			--- smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/reset-openvpn 2008-12-02 14:23:04.000000000 +0100
246			+++ mezzanine_patched_smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/reset-openvpn 1970-01-01 01:00:00.000000000 +0100
247			@@ -1,7 +0,0 @@
248			-#!/bin/bash
249			-####################################
250			-# Reset SME openvpn configuration after unclean shutdown
251			-####################################
252			-eth=$(/sbin/e-smith/db configuration getprop bridge ethernetInterface)
253			-/sbin/e-smith/db configuration setprop InternalInterface Name $eth
254			-