smeserver-openvpn-bridge/contribs8/smeserver-openvpn-bridge-2.0-remove_obsolete_init_scripts.patch

diff -Nur -x '*.orig' -x '*.rej' smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/openvpn-bridge mezzanine_patched_smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/openvpn-bridge
--- smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/openvpn-bridge    2008-09-02 23:13:34.000000000 +0200
+++ mezzanine_patched_smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/openvpn-bridge  1970-01-01 01:00:00.000000000 +0100
@@ -1,239 +0,0 @@
-#!/bin/sh
-#
-# openvpn       This shell script takes care of starting and stopping
-#               openvpn on RedHat or other chkconfig-based system.
-#
-# chkconfig: 345 24 76
-#
-# description: OpenVPN is a robust and highly flexible tunneling application that
-#              uses all of the encryption, authentication, and certification features
-#              of the OpenSSL library to securely tunnel IP networks over a single
-#              UDP port.
-#
-
-# Contributed to the OpenVPN project by
-# Douglas Keller <doug@voidstar.dyndns.org>
-# 2002.05.15
-
-# To install:
-#   copy this file to /etc/rc.d/init.d/openvpn
-#   shell> chkconfig --add openvpn
-#   shell> mkdir /etc/openvpn
-#   make .conf or .sh files in /etc/openvpn (see below)
-
-# To uninstall:
-#   run: chkconfig --del openvpn
-
-# Author's Notes:
-#
-# I have created an /etc/init.d init script and enhanced openvpn.spec to
-# automatically register the init script.  Once the RPM is installed you
-# can start and stop OpenVPN with "service openvpn start" and "service
-# openvpn stop".
-#
-# The init script does the following:
-#
-# - Starts an openvpn process for each .conf file it finds in
-#   /etc/openvpn.
-#
-# - If /etc/openvpn/xxx.sh exists for a xxx.conf file then it executes
-#   it before starting openvpn (useful for doing openvpn --mktun...).
-#
-# - In addition to start/stop you can do:
-#
-#   service openvpn reload - SIGHUP
-#   service openvpn reopen - SIGUSR1
-#   service openvpn status - SIGUSR2
-#
-# Modifications:
-#
-# 2003.05.02
-#   * Changed == to = for sh compliance (Bishop Clark).
-#   * If condrestart|reload|reopen|status, check that we were
-#     actually started (James Yonan).
-#   * Added lock, piddir, and work variables (James Yonan).
-#   * If start is attempted twice, without an intervening stop, or
-#     if start is attempted when previous start was not properly
-#     shut down, then kill any previously started processes, before
-#     commencing new start operation (James Yonan).
-#   * Do a better job of flagging errors on start, and properly
-#     returning success or failure status to caller (James Yonan).
-#
-# 2005.04.04
-#   * Added openvpn-startup and openvpn-shutdown script calls
-#     (James Yonan).
-#
-
-# Location of openvpn binary
-openvpn=""
-openvpn_locations="/usr/sbin/openvpn /usr/local/sbin/openvpn"
-for location in $openvpn_locations
-do
-  if [ -f "$location" ]
-  then
-    openvpn=$location
-  fi
-done
-
-# configuration file
-conf=server-bridge
-
-# Lockfile
-lock="/var/lock/subsys/openvpn-bridge"
-
-# PID directory
-piddir="/var/run/openvpn"
-
-# Our working directory
-work=/etc/openvpn
-
-# Source function library.
-. /etc/rc.d/init.d/functions
-
-# Source networking configuration.
-. /etc/sysconfig/network
-
-# Check that networking is up.
-if [ ${NETWORKING} = "no" ]
-then
-  echo "Networking is down"
-  exit 0
-fi
-
-# Check that binary exists
-if ! [ -f  $openvpn ] 
-then
-  echo "openvpn binary not found"
-  exit 0
-fi
-
-# See how we were called.
-case "$1" in
-  start)
-       echo -n $"Starting openvpn: "
-
-       /sbin/modprobe tun >/dev/null 2>&1
-
-       # From a security perspective, I think it makes
-       # sense to remove this, and have users who need
-       # it explictly enable in their --up scripts or
-       # firewall setups.
-
-       #echo 1 > /proc/sys/net/ipv4/ip_forward
-
-       if [ ! -d  $piddir ]; then
-           mkdir $piddir
-       fi
-
-       if [ -f $lock ]; then
-           # we were not shut down correctly
-            if [ -s $piddir/$conf.pid ]; then
-                       kill `cat $piddir/$conf.pid` >/dev/null 2>&1
-            fi
-           rm -f $piddir/$conf.pid
-           rm -f $lock
-           sleep 2
-       fi
-
-       rm -f $piddir/$conf.pid
-       cd $work
-
-       errors=0
-       successes=0
-       
-       # Run startup script, if defined
-       if [ -f $work/$conf.up ]; then
-               $work/$conf.up
-       fi
-
-       rm -f $piddir/$conf.pid
-       $openvpn --daemon --writepid $piddir/$conf.pid --config $work/$conf.ovpn --cd $work
-       if [ $? = 0 ]; then
-               successes=1
-       else
-               errors=1
-       fi
-
-       if [ $errors = 1 ]; then
-           failure; echo
-       else
-           success; echo
-       fi
-
-       if [ $successes = 1 ]; then
-           touch $lock
-       fi
-       ;;
-  stop)
-       echo -n $"Shutting down openvpn: "
-       cd $work
-       # Run shutdown script, if defined
-       if [ -s $piddir/$conf.pid ]; then
-               kill `cat $piddir/$conf.pid` >/dev/null 2>&1
-       fi
-       if [ -f $work/$conf.down ]; then
-           $work/$conf.down
-       fi
-       rm -f $piddir/$conf.pid
-
-       success; echo
-       rm -f $lock
-       ;;
-  restart)
-       $0 stop
-       sleep 2
-       $0 start
-       ;;
-  reload)
-       if [ -f $lock ]; then
-               if [ -s $piddir/$conf.pid ]; then
-                   kill -HUP `cat $piddir/$conf.pid` >/dev/null 2>&1
-               fi
-       else
-           echo "openvpn: service not started"
-           exit 1
-       fi
-       ;;
-  reopen)
-       if [ -f $lock ]; then
-               if [ -s $piddir/$conf.pid ]; then
-                   kill -USR1 `cat $piddir/$conf.pid` >/dev/null 2>&1
-               fi
-       else
-           echo "openvpn: service not started"
-           exit 1
-       fi
-       ;;
-  condrestart)
-       if [ -f $lock ]; then
-           $0 stop
-           # avoid race
-           sleep 2
-           $0 start
-       fi
-       ;;
-  status)
-       if [ -f $lock ]; then
-               if [ -s $piddir/$conf.pid ]; then
-                   kill -USR2 `cat $piddir/$conf.pid` >/dev/null 2>&1
-               fi
-       echo "Status written to /var/log/messages"
-       else
-           echo "openvpn: service not started"
-           exit 1
-       fi
-        ;;
-  adjust)
-       CONF_STATUS=$(/sbin/e-smith/db configuration getprop openvpn-bridge status)
-       $0 stop
-       sleep 2
-       if [ $CONF_STATUS == 'enabled' ]; then
-               $0 start
-       fi
-               ;;
-  *)
-       echo "Usage: openvpn {start|stop|restart|condrestart|reload|reopen|status|adjust}"
-       exit 1
-       ;;
-esac
-exit 0
diff -Nur -x '*.orig' -x '*.rej' smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/reset-openvpn mezzanine_patched_smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/reset-openvpn
--- smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/reset-openvpn     2008-12-02 14:23:04.000000000 +0100
+++ mezzanine_patched_smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/reset-openvpn   1970-01-01 01:00:00.000000000 +0100
@@ -1,7 +0,0 @@
-#!/bin/bash
-####################################
-# Reset SME openvpn configuration after unclean shutdown
-####################################
-eth=$(/sbin/e-smith/db configuration getprop bridge ethernetInterface)
-/sbin/e-smith/db configuration setprop InternalInterface Name $eth
-
1	diff -Nur -x '.orig' -x '.rej' smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/openvpn-bridge mezzanine_patched_smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/openvpn-bridge
2	--- smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/openvpn-bridge 2008-09-02 23:13:34.000000000 +0200
3	+++ mezzanine_patched_smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/openvpn-bridge 1970-01-01 01:00:00.000000000 +0100
4	@@ -1,239 +0,0 @@
5	-#!/bin/sh
6	-#
7	-# openvpn This shell script takes care of starting and stopping
8	-# openvpn on RedHat or other chkconfig-based system.
9	-#
10	-# chkconfig: 345 24 76
11	-#
12	-# description: OpenVPN is a robust and highly flexible tunneling application that
13	-# uses all of the encryption, authentication, and certification features
14	-# of the OpenSSL library to securely tunnel IP networks over a single
15	-# UDP port.
16	-#
17	-
18	-# Contributed to the OpenVPN project by
19	-# Douglas Keller <doug@voidstar.dyndns.org>
20	-# 2002.05.15
21	-
22	-# To install:
23	-# copy this file to /etc/rc.d/init.d/openvpn
24	-# shell> chkconfig --add openvpn
25	-# shell> mkdir /etc/openvpn
26	-# make .conf or .sh files in /etc/openvpn (see below)
27	-
28	-# To uninstall:
29	-# run: chkconfig --del openvpn
30	-
31	-# Author's Notes:
32	-#
33	-# I have created an /etc/init.d init script and enhanced openvpn.spec to
34	-# automatically register the init script. Once the RPM is installed you
35	-# can start and stop OpenVPN with "service openvpn start" and "service
36	-# openvpn stop".
37	-#
38	-# The init script does the following:
39	-#
40	-# - Starts an openvpn process for each .conf file it finds in
41	-# /etc/openvpn.
42	-#
43	-# - If /etc/openvpn/xxx.sh exists for a xxx.conf file then it executes
44	-# it before starting openvpn (useful for doing openvpn --mktun...).
45	-#
46	-# - In addition to start/stop you can do:
47	-#
48	-# service openvpn reload - SIGHUP
49	-# service openvpn reopen - SIGUSR1
50	-# service openvpn status - SIGUSR2
51	-#
52	-# Modifications:
53	-#
54	-# 2003.05.02
55	-# * Changed == to = for sh compliance (Bishop Clark).
56	-# * If condrestart\|reload\|reopen\|status, check that we were
57	-# actually started (James Yonan).
58	-# * Added lock, piddir, and work variables (James Yonan).
59	-# * If start is attempted twice, without an intervening stop, or
60	-# if start is attempted when previous start was not properly
61	-# shut down, then kill any previously started processes, before
62	-# commencing new start operation (James Yonan).
63	-# * Do a better job of flagging errors on start, and properly
64	-# returning success or failure status to caller (James Yonan).
65	-#
66	-# 2005.04.04
67	-# * Added openvpn-startup and openvpn-shutdown script calls
68	-# (James Yonan).
69	-#
70	-
71	-# Location of openvpn binary
72	-openvpn=""
73	-openvpn_locations="/usr/sbin/openvpn /usr/local/sbin/openvpn"
74	-for location in $openvpn_locations
75	-do
76	- if [ -f "$location" ]
77	- then
78	- openvpn=$location
79	- fi
80	-done
81	-
82	-# configuration file
83	-conf=server-bridge
84	-
85	-# Lockfile
86	-lock="/var/lock/subsys/openvpn-bridge"
87	-
88	-# PID directory
89	-piddir="/var/run/openvpn"
90	-
91	-# Our working directory
92	-work=/etc/openvpn
93	-
94	-# Source function library.
95	-. /etc/rc.d/init.d/functions
96	-
97	-# Source networking configuration.
98	-. /etc/sysconfig/network
99	-
100	-# Check that networking is up.
101	-if [ ${NETWORKING} = "no" ]
102	-then
103	- echo "Networking is down"
104	- exit 0
105	-fi
106	-
107	-# Check that binary exists
108	-if ! [ -f $openvpn ]
109	-then
110	- echo "openvpn binary not found"
111	- exit 0
112	-fi
113	-
114	-# See how we were called.
115	-case "$1" in
116	- start)
117	- echo -n $"Starting openvpn: "
118	-
119	- /sbin/modprobe tun >/dev/null 2>&1
120	-
121	- # From a security perspective, I think it makes
122	- # sense to remove this, and have users who need
123	- # it explictly enable in their --up scripts or
124	- # firewall setups.
125	-
126	- #echo 1 > /proc/sys/net/ipv4/ip_forward
127	-
128	- if [ ! -d $piddir ]; then
129	- mkdir $piddir
130	- fi
131	-
132	- if [ -f $lock ]; then
133	- # we were not shut down correctly
134	- if [ -s $piddir/$conf.pid ]; then
135	- kill `cat $piddir/$conf.pid` >/dev/null 2>&1
136	- fi
137	- rm -f $piddir/$conf.pid
138	- rm -f $lock
139	- sleep 2
140	- fi
141	-
142	- rm -f $piddir/$conf.pid
143	- cd $work
144	-
145	- errors=0
146	- successes=0
147	-
148	- # Run startup script, if defined
149	- if [ -f $work/$conf.up ]; then
150	- $work/$conf.up
151	- fi
152	-
153	- rm -f $piddir/$conf.pid
154	- $openvpn --daemon --writepid $piddir/$conf.pid --config $work/$conf.ovpn --cd $work
155	- if [ $? = 0 ]; then
156	- successes=1
157	- else
158	- errors=1
159	- fi
160	-
161	- if [ $errors = 1 ]; then
162	- failure; echo
163	- else
164	- success; echo
165	- fi
166	-
167	- if [ $successes = 1 ]; then
168	- touch $lock
169	- fi
170	- ;;
171	- stop)
172	- echo -n $"Shutting down openvpn: "
173	- cd $work
174	- # Run shutdown script, if defined
175	- if [ -s $piddir/$conf.pid ]; then
176	- kill `cat $piddir/$conf.pid` >/dev/null 2>&1
177	- fi
178	- if [ -f $work/$conf.down ]; then
179	- $work/$conf.down
180	- fi
181	- rm -f $piddir/$conf.pid
182	-
183	- success; echo
184	- rm -f $lock
185	- ;;
186	- restart)
187	- $0 stop
188	- sleep 2
189	- $0 start
190	- ;;
191	- reload)
192	- if [ -f $lock ]; then
193	- if [ -s $piddir/$conf.pid ]; then
194	- kill -HUP `cat $piddir/$conf.pid` >/dev/null 2>&1
195	- fi
196	- else
197	- echo "openvpn: service not started"
198	- exit 1
199	- fi
200	- ;;
201	- reopen)
202	- if [ -f $lock ]; then
203	- if [ -s $piddir/$conf.pid ]; then
204	- kill -USR1 `cat $piddir/$conf.pid` >/dev/null 2>&1
205	- fi
206	- else
207	- echo "openvpn: service not started"
208	- exit 1
209	- fi
210	- ;;
211	- condrestart)
212	- if [ -f $lock ]; then
213	- $0 stop
214	- # avoid race
215	- sleep 2
216	- $0 start
217	- fi
218	- ;;
219	- status)
220	- if [ -f $lock ]; then
221	- if [ -s $piddir/$conf.pid ]; then
222	- kill -USR2 `cat $piddir/$conf.pid` >/dev/null 2>&1
223	- fi
224	- echo "Status written to /var/log/messages"
225	- else
226	- echo "openvpn: service not started"
227	- exit 1
228	- fi
229	- ;;
230	- adjust)
231	- CONF_STATUS=$(/sbin/e-smith/db configuration getprop openvpn-bridge status)
232	- $0 stop
233	- sleep 2
234	- if [ $CONF_STATUS == 'enabled' ]; then
235	- $0 start
236	- fi
237	- ;;
238	- *)
239	- echo "Usage: openvpn {start\|stop\|restart\|condrestart\|reload\|reopen\|status\|adjust}"
240	- exit 1
241	- ;;
242	-esac
243	-exit 0
244	diff -Nur -x '.orig' -x '.rej' smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/reset-openvpn mezzanine_patched_smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/reset-openvpn
245	--- smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/reset-openvpn 2008-12-02 14:23:04.000000000 +0100
246	+++ mezzanine_patched_smeserver-openvpn-bridge-2.0/root/etc/rc.d/init.d/reset-openvpn 1970-01-01 01:00:00.000000000 +0100
247	@@ -1,7 +0,0 @@
248	-#!/bin/bash
249	-####################################
250	-# Reset SME openvpn configuration after unclean shutdown
251	-####################################
252	-eth=$(/sbin/e-smith/db configuration getprop bridge ethernetInterface)
253	-/sbin/e-smith/db configuration setprop InternalInterface Name $eth
254	-