smeserver-openvpn-s2s/contribs8/smeserver-openvpn-s2s-0.1-tls_locale_1.patch

diff -Nur -x '*.orig' -x '*.rej' smeserver-openvpn-s2s-0.1/root/etc/e-smith/locale/en-us/etc/e-smith/web/functions/openvpns2s mezzanine_patched_smeserver-openvpn-s2s-0.1/root/etc/e-smith/locale/en-us/etc/e-smith/web/functions/openvpns2s
--- smeserver-openvpn-s2s-0.1/root/etc/e-smith/locale/en-us/etc/e-smith/web/functions/openvpns2s        2010-10-17 16:10:14.000000000 +0200
+++ mezzanine_patched_smeserver-openvpn-s2s-0.1/root/etc/e-smith/locale/en-us/etc/e-smith/web/functions/openvpns2s      2010-10-17 16:09:42.000000000 +0200
@@ -44,8 +44,71 @@
         <trans>Status</trans>
     </entry>
     <entry>
+        <base>DESC_AUTH</base>
+        <trans>
+            <![CDATA[Choose the authentication mechanism.<br>
+            Shared Key is simple to configure because you don't need to create and manage a PKI. 
+            You just need to create a secret key, and and configure it on both side.<br>
+            TLS authentication is a bit harder to configure, as you'll need to manage a PKI, but
+            provide a better level of security (like the Perfect Forward Secrecy).<br>
+            If you don't care about the extra security provided by TLS, you should choose Shared Key here.]]>
+        </trans>
+    </entry>
+    <entry>
+        <base>LABEL_AUTH</base>
+        <trans>Authentication mechanism</trans>
+    </entry>
+    <entry>
+        <base>DESC_CONFIGURE_CERT</base>
+        <trans>This page lets you configure the authentication of this daemon</trans>
+    </entry>
+    <entry>
+        <base>DESC_CRL_URL</base>
+        <trans>
+           You can enter an URL where the CRL can be find. Your SME Server will update the CRL every hour 
+           and check if the certificate of the remote endpoint is not revoked. If you don't wan't to use 
+           the CRL verification , just let this field emtpy.
+        </trans>
+    </entry>
+    <entry>
+        <base>LABEL_CRL_URL</base>
+        <trans>CRL update URL</trans>
+    </entry>
+    <entry>
+        <base>DESC_CA_PEM</base>
+        <trans>Enter the authoritative certificate in pem format</trans>
+    </entry>
+    <entry>
+        <base>LABEL_CA_PEM</base>
+        <trans>Authoritative certificate</trans>
+    </entry>
+    <entry>
+        <base>DESC_CRT_PEM</base>
+        <trans>Enter the certificate in pem format</trans>
+    </entry>
+    <entry>
+        <base>LABEL_CRT_PEM</base>
+        <trans>Enter the certificate in pem format</trans>
+    </entry>
+    <entry>
         <base>DESC_REMOTE_HOST</base>
-        <trans>Enter the hostname or IP of the remote server</trans>
+        <trans>Certificate</trans>
+    </entry>
+    <entry>
+        <base>DESC_KEY_PEM</base>
+        <trans>Enter the private key in pem format</trans>
+    </entry>
+    <entry>
+        <base>LABEL_KEY_PEM</base>
+        <trans>Private key</trans>
+    </entry>
+    <entry>
+        <base>DESC_DH_PEM</base>
+        <trans>Enter Diffie-Hellman parameters</trans>
+    </entry>
+    <entry>
+        <base>LABEL_DH_PEM</base>
+        <trans>Diffie-Hellman parameters</trans>
     </entry>
     <entry>
         <base>LABEL_REMOTE_HOST</base>
@@ -102,9 +165,19 @@
         </trans>
     </entry>
     <entry>
+        <base>DESC_SHARED_KEY_TLS</base>
+        <trans>
+            <![CDATA[You can enter here a optional secret key.<br>
+            It will provide an extra security layer to your server.<br>
+            You can create keys using this command: openvpn --genkey --secret /dev/stdout<br>
+            This key should be kept secret, and only be stored on the client and the server.]]>
+        </trans>
+    </entry>
+    <entry>
         <base>LABEL_SHARED_KEY</base>
-        <trans>Secret key</trans>
+        <trans>Shared key</trans>
     </entry>
+
     <entry>
         <base>DESC_ADD_SERVER_PAGE</base>
         <trans>This page lets you configure a new daemon acting as a server</trans>
1	unnilennium	1.1	diff -Nur -x '.orig' -x '.rej' smeserver-openvpn-s2s-0.1/root/etc/e-smith/locale/en-us/etc/e-smith/web/functions/openvpns2s mezzanine_patched_smeserver-openvpn-s2s-0.1/root/etc/e-smith/locale/en-us/etc/e-smith/web/functions/openvpns2s
2			--- smeserver-openvpn-s2s-0.1/root/etc/e-smith/locale/en-us/etc/e-smith/web/functions/openvpns2s 2010-10-17 16:10:14.000000000 +0200
3			+++ mezzanine_patched_smeserver-openvpn-s2s-0.1/root/etc/e-smith/locale/en-us/etc/e-smith/web/functions/openvpns2s 2010-10-17 16:09:42.000000000 +0200
4			@@ -44,8 +44,71 @@
5			<trans>Status</trans>
6			</entry>
7			<entry>
8			+ <base>DESC_AUTH</base>
9			+ <trans>
10			+ <![CDATA[Choose the authentication mechanism.<br>
11			+ Shared Key is simple to configure because you don't need to create and manage a PKI.
12			+ You just need to create a secret key, and and configure it on both side.<br>
13			+ TLS authentication is a bit harder to configure, as you'll need to manage a PKI, but
14			+ provide a better level of security (like the Perfect Forward Secrecy).<br>
15			+ If you don't care about the extra security provided by TLS, you should choose Shared Key here.]]>
16			+ </trans>
17			+ </entry>
18			+ <entry>
19			+ <base>LABEL_AUTH</base>
20			+ <trans>Authentication mechanism</trans>
21			+ </entry>
22			+ <entry>
23			+ <base>DESC_CONFIGURE_CERT</base>
24			+ <trans>This page lets you configure the authentication of this daemon</trans>
25			+ </entry>
26			+ <entry>
27			+ <base>DESC_CRL_URL</base>
28			+ <trans>
29			+ You can enter an URL where the CRL can be find. Your SME Server will update the CRL every hour
30			+ and check if the certificate of the remote endpoint is not revoked. If you don't wan't to use
31			+ the CRL verification , just let this field emtpy.
32			+ </trans>
33			+ </entry>
34			+ <entry>
35			+ <base>LABEL_CRL_URL</base>
36			+ <trans>CRL update URL</trans>
37			+ </entry>
38			+ <entry>
39			+ <base>DESC_CA_PEM</base>
40			+ <trans>Enter the authoritative certificate in pem format</trans>
41			+ </entry>
42			+ <entry>
43			+ <base>LABEL_CA_PEM</base>
44			+ <trans>Authoritative certificate</trans>
45			+ </entry>
46			+ <entry>
47			+ <base>DESC_CRT_PEM</base>
48			+ <trans>Enter the certificate in pem format</trans>
49			+ </entry>
50			+ <entry>
51			+ <base>LABEL_CRT_PEM</base>
52			+ <trans>Enter the certificate in pem format</trans>
53			+ </entry>
54			+ <entry>
55			<base>DESC_REMOTE_HOST</base>
56			- <trans>Enter the hostname or IP of the remote server</trans>
57			+ <trans>Certificate</trans>
58			+ </entry>
59			+ <entry>
60			+ <base>DESC_KEY_PEM</base>
61			+ <trans>Enter the private key in pem format</trans>
62			+ </entry>
63			+ <entry>
64			+ <base>LABEL_KEY_PEM</base>
65			+ <trans>Private key</trans>
66			+ </entry>
67			+ <entry>
68			+ <base>DESC_DH_PEM</base>
69			+ <trans>Enter Diffie-Hellman parameters</trans>
70			+ </entry>
71			+ <entry>
72			+ <base>LABEL_DH_PEM</base>
73			+ <trans>Diffie-Hellman parameters</trans>
74			</entry>
75			<entry>
76			<base>LABEL_REMOTE_HOST</base>
77			@@ -102,9 +165,19 @@
78			</trans>
79			</entry>
80			<entry>
81			+ <base>DESC_SHARED_KEY_TLS</base>
82			+ <trans>
83			+ <![CDATA[You can enter here a optional secret key.<br>
84			+ It will provide an extra security layer to your server.<br>
85			+ You can create keys using this command: openvpn --genkey --secret /dev/stdout<br>
86			+ This key should be kept secret, and only be stored on the client and the server.]]>
87			+ </trans>
88			+ </entry>
89			+ <entry>
90			<base>LABEL_SHARED_KEY</base>
91			- <trans>Secret key</trans>
92			+ <trans>Shared key</trans>
93			</entry>
94			+
95			<entry>
96			<base>DESC_ADD_SERVER_PAGE</base>
97			<trans>This page lets you configure a new daemon acting as a server</trans>