smeserver-shared-folders/contribs8/smeserver-shared-folders-0.1-ajaxplorer2pydio.patch

diff -Nur smeserver-shared-folders-0.1/root/etc/e-smith/events/actions/share-modify smeserver-shared-folders-0.1_pydio/root/etc/e-smith/events/actions/share-modify
--- smeserver-shared-folders-0.1/root/etc/e-smith/events/actions/share-modify   2013-10-22 18:47:54.650543102 +0200
+++ smeserver-shared-folders-0.1_pydio/root/etc/e-smith/events/actions/share-modify     2013-10-22 18:54:05.919409184 +0200
@@ -95,7 +95,7 @@
 my @writeusers = split(/[;,]/,($properties {'WriteUsers'} || ''));
 my @readusers = split(/[;,]/,($properties {'ReadUsers'} || ''));
 my $rsync = $properties{'rsyncAccess'} || 'none';
-my $ajaxplorer = $properties{'Ajaxplorer'} || 'disabled';
+my $pydio = $properties{'Pydio'} || 'disabled';
 
 # Don't reset permissions if ManualPermissions is set to 'yes'
 
@@ -128,7 +128,7 @@
         $acl .= 'u:'.$user.':rX,';
     }
     $acl .= 'u:rsync:rX,' if ($rsync =~ /^local|global$/);
-    $acl .= 'u:www:rwX,' unless (($http eq 'none') && ($ajaxplorer ne 'enabled'));
+    $acl .= 'u:www:rwX,' unless (($http eq 'none') && ($pydio ne 'enabled'));
 
     # Set the effective ACLs
     system($setfacl,
@@ -163,7 +163,7 @@
         $acl .= 'u:'.$user.':rX,';
     }
     $acl .= 'u:rsync:rX,' if ($rsync =~ /^local|global$/);
-    $acl .= 'u:www:rX,' unless (($http eq 'none') && ($ajaxplorer ne 'enabled'));
+    $acl .= 'u:www:rX,' unless (($http eq 'none') && ($pydio ne 'enabled'));
 
     system($setfacl,
            '-m',
diff -Nur smeserver-shared-folders-0.1/root/etc/e-smith/locale/en-us/etc/e-smith/web/functions/shares smeserver-shared-folders-0.1_pydio/root/etc/e-smith/locale/en-us/etc/e-smith/web/functions/shares
--- smeserver-shared-folders-0.1/root/etc/e-smith/locale/en-us/etc/e-smith/web/functions/shares 2013-10-22 18:47:54.596543123 +0200
+++ smeserver-shared-folders-0.1_pydio/root/etc/e-smith/locale/en-us/etc/e-smith/web/functions/shares   2013-10-22 18:52:50.334434822 +0200
@@ -497,16 +497,16 @@
     </entry>
 
     <entry>
-        <base>DESC_AJAXPLORER</base>
+        <base>DESC_PYDIO</base>
         <trans>
-            The following settings control the access of this shared folder with the web based file manager Ajaxplorer
+            The following settings control the access of this shared folder with the web based file manager Pydio (formerly AjaXplorer)
         </trans>
     </entry>
 
     <entry>
-        <base>LABEL_AJAXPLORER</base>
+        <base>LABEL_PYDIO</base>
         <trans>
-            Ajaxplorer Access
+            Pydio Access
         </trans>
     </entry>
 
diff -Nur smeserver-shared-folders-0.1/root/etc/e-smith/web/functions/shares smeserver-shared-folders-0.1_pydio/root/etc/e-smith/web/functions/shares
--- smeserver-shared-folders-0.1/root/etc/e-smith/web/functions/shares  2013-10-22 18:47:54.618543115 +0200
+++ smeserver-shared-folders-0.1_pydio/root/etc/e-smith/web/functions/shares    2013-10-22 18:51:18.547467355 +0200
@@ -107,7 +107,7 @@
                 <label>LABEL_DYNAMIC_CONTENT</label>
        </field>
 
-       <subroutine src="print_ajaxplorer_fields()" />
+       <subroutine src="print_pydio_fields()" />
 
        <subroutine src="print_encryption_fields()" />
 
diff -Nur smeserver-shared-folders-0.1/root/usr/lib/perl5/site_perl/esmith/FormMagick/Panel/shares.pm smeserver-shared-folders-0.1_pydio/root/usr/lib/perl5/site_perl/esmith/FormMagick/Panel/shares.pm
--- smeserver-shared-folders-0.1/root/usr/lib/perl5/site_perl/esmith/FormMagick/Panel/shares.pm 2013-10-22 18:47:54.651543102 +0200
+++ smeserver-shared-folders-0.1_pydio/root/usr/lib/perl5/site_perl/esmith/FormMagick/Panel/shares.pm   2013-10-22 19:15:20.044092421 +0200
@@ -25,7 +25,7 @@
     print_share_table
     print_share_name_field
     print_encryption_fields
-    print_ajaxplorer_fields
+    print_pydio_fields
     acl_list
     smbAccess_list
     httpAccess_list
@@ -312,29 +312,29 @@
     return undef;
 }
 
-# If ajaxplorer is enabled:
-sub print_ajaxplorer_fields {
+# If pydio is enabled:
+sub print_pydio_fields {
     my $self = shift;
-    my $ajaxplorer = $c->get('ajaxplorer') || return undef;
-    if (($ajaxplorer->prop('status') || 'disabled') eq 'enabled'){
+    my $pydio = $c->get('pydio') || return undef;
+    if (($pydio->prop('status') || 'disabled') eq 'enabled'){
         print_section_bar();
         my ($enabled,$disabled) = ('','');
         my $sharename = $self->{cgi}->param('name') || '';
         my $share = $a->get($sharename);
-        # If share exists and Ajxplorer is enabled
+        # If share exists and Pydio is enabled
         if ($share){
-            if (($share->prop('Ajaxplorer') || 'disabled') eq 'enabled'){
+            if (($share->prop('Pydio') || 'disabled') eq 'enabled'){
                 $enabled = ' SELECTED';
             }
         }
         else {
             $disabled = ' SELECTED';
         }
-        print qq(<tr><td colspan="2">) . $self->localise('DESC_AJAXPLORER') . qq(</td></tr>);
+        print qq(<tr><td colspan="2">) . $self->localise('DESC_PYDIO') . qq(</td></tr>);
         print qq(<tr><td class="sme-noborders-label">) .
-            $self->localise('LABEL_AJAXPLORER') . qq(</td>\n);
+            $self->localise('LABEL_PYDIO') . qq(</td>\n);
         print qq(
-            <td class="sme-noborders-content"><SELECT NAME="ajaxplorer" TYPE="select"> 
+            <td class="sme-noborders-content"><SELECT NAME="pydio" TYPE="select"> 
               <OPTION VALUE="disabled"$disabled>) . $self->localise('DISABLED') .
               qq(<OPTION VALUE="enabled"$enabled>) . $self->localise('ENABLED') .
             qq(</SELECT></td> 
@@ -593,7 +593,7 @@
         smbAccess           => $q->param('smbaccess'),
         httpAccess          => $q->param('httpaccess'),
         WebDav              => $q->param('webdav'),
-        Ajaxplorer          => ($q->param('ajaxplorer') || 'disabled'),
+        Pydio               => ($q->param('pydio') || 'disabled'),
         RequireSSL          => $q->param('requireSSL'),
         Indexes             => $q->param('indexes'),
         DynamicContent      => $q->param('dynamic'),
@@ -646,7 +646,7 @@
         smbAccess           => $q->param('smbaccess'),
         httpAccess          => $q->param('httpaccess'),
         WebDav              => $q->param('webdav'),
-        Ajaxplorer          => ($q->param('ajaxplorer') || 'disabled'),
+        Pydio               => ($q->param('pydio') || 'disabled'),
         RequireSSL          => $q->param('requireSSL'),
         Indexes                    => $q->param('indexes'),
         DynamicContent      => $q->param('dynamic'),
1	diff -Nur smeserver-shared-folders-0.1/root/etc/e-smith/events/actions/share-modify smeserver-shared-folders-0.1_pydio/root/etc/e-smith/events/actions/share-modify
2	--- smeserver-shared-folders-0.1/root/etc/e-smith/events/actions/share-modify 2013-10-22 18:47:54.650543102 +0200
3	+++ smeserver-shared-folders-0.1_pydio/root/etc/e-smith/events/actions/share-modify 2013-10-22 18:54:05.919409184 +0200
4	@@ -95,7 +95,7 @@
5	my @writeusers = split(/[;,]/,($properties {'WriteUsers'} \|\| ''));
6	my @readusers = split(/[;,]/,($properties {'ReadUsers'} \|\| ''));
7	my $rsync = $properties{'rsyncAccess'} \|\| 'none';
8	-my $ajaxplorer = $properties{'Ajaxplorer'} \|\| 'disabled';
9	+my $pydio = $properties{'Pydio'} \|\| 'disabled';
10
11	# Don't reset permissions if ManualPermissions is set to 'yes'
12
13	@@ -128,7 +128,7 @@
14	$acl .= 'u:'.$user.':rX,';
15	}
16	$acl .= 'u:rsync:rX,' if ($rsync =~ /^local\|global$/);
17	- $acl .= 'u:www:rwX,' unless (($http eq 'none') && ($ajaxplorer ne 'enabled'));
18	+ $acl .= 'u:www:rwX,' unless (($http eq 'none') && ($pydio ne 'enabled'));
19
20	# Set the effective ACLs
21	system($setfacl,
22	@@ -163,7 +163,7 @@
23	$acl .= 'u:'.$user.':rX,';
24	}
25	$acl .= 'u:rsync:rX,' if ($rsync =~ /^local\|global$/);
26	- $acl .= 'u:www:rX,' unless (($http eq 'none') && ($ajaxplorer ne 'enabled'));
27	+ $acl .= 'u:www:rX,' unless (($http eq 'none') && ($pydio ne 'enabled'));
28
29	system($setfacl,
30	'-m',
31	diff -Nur smeserver-shared-folders-0.1/root/etc/e-smith/locale/en-us/etc/e-smith/web/functions/shares smeserver-shared-folders-0.1_pydio/root/etc/e-smith/locale/en-us/etc/e-smith/web/functions/shares
32	--- smeserver-shared-folders-0.1/root/etc/e-smith/locale/en-us/etc/e-smith/web/functions/shares 2013-10-22 18:47:54.596543123 +0200
33	+++ smeserver-shared-folders-0.1_pydio/root/etc/e-smith/locale/en-us/etc/e-smith/web/functions/shares 2013-10-22 18:52:50.334434822 +0200
34	@@ -497,16 +497,16 @@
35	</entry>
36
37	<entry>
38	- <base>DESC_AJAXPLORER</base>
39	+ <base>DESC_PYDIO</base>
40	<trans>
41	- The following settings control the access of this shared folder with the web based file manager Ajaxplorer
42	+ The following settings control the access of this shared folder with the web based file manager Pydio (formerly AjaXplorer)
43	</trans>
44	</entry>
45
46	<entry>
47	- <base>LABEL_AJAXPLORER</base>
48	+ <base>LABEL_PYDIO</base>
49	<trans>
50	- Ajaxplorer Access
51	+ Pydio Access
52	</trans>
53	</entry>
54
55	diff -Nur smeserver-shared-folders-0.1/root/etc/e-smith/web/functions/shares smeserver-shared-folders-0.1_pydio/root/etc/e-smith/web/functions/shares
56	--- smeserver-shared-folders-0.1/root/etc/e-smith/web/functions/shares 2013-10-22 18:47:54.618543115 +0200
57	+++ smeserver-shared-folders-0.1_pydio/root/etc/e-smith/web/functions/shares 2013-10-22 18:51:18.547467355 +0200
58	@@ -107,7 +107,7 @@
59	<label>LABEL_DYNAMIC_CONTENT</label>
60	</field>
61
62	- <subroutine src="print_ajaxplorer_fields()" />
63	+ <subroutine src="print_pydio_fields()" />
64
65	<subroutine src="print_encryption_fields()" />
66
67	diff -Nur smeserver-shared-folders-0.1/root/usr/lib/perl5/site_perl/esmith/FormMagick/Panel/shares.pm smeserver-shared-folders-0.1_pydio/root/usr/lib/perl5/site_perl/esmith/FormMagick/Panel/shares.pm
68	--- smeserver-shared-folders-0.1/root/usr/lib/perl5/site_perl/esmith/FormMagick/Panel/shares.pm 2013-10-22 18:47:54.651543102 +0200
69	+++ smeserver-shared-folders-0.1_pydio/root/usr/lib/perl5/site_perl/esmith/FormMagick/Panel/shares.pm 2013-10-22 19:15:20.044092421 +0200
70	@@ -25,7 +25,7 @@
71	print_share_table
72	print_share_name_field
73	print_encryption_fields
74	- print_ajaxplorer_fields
75	+ print_pydio_fields
76	acl_list
77	smbAccess_list
78	httpAccess_list
79	@@ -312,29 +312,29 @@
80	return undef;
81	}
82
83	-# If ajaxplorer is enabled:
84	-sub print_ajaxplorer_fields {
85	+# If pydio is enabled:
86	+sub print_pydio_fields {
87	my $self = shift;
88	- my $ajaxplorer = $c->get('ajaxplorer') \|\| return undef;
89	- if (($ajaxplorer->prop('status') \|\| 'disabled') eq 'enabled'){
90	+ my $pydio = $c->get('pydio') \|\| return undef;
91	+ if (($pydio->prop('status') \|\| 'disabled') eq 'enabled'){
92	print_section_bar();
93	my ($enabled,$disabled) = ('','');
94	my $sharename = $self->{cgi}->param('name') \|\| '';
95	my $share = $a->get($sharename);
96	- # If share exists and Ajxplorer is enabled
97	+ # If share exists and Pydio is enabled
98	if ($share){
99	- if (($share->prop('Ajaxplorer') \|\| 'disabled') eq 'enabled'){
100	+ if (($share->prop('Pydio') \|\| 'disabled') eq 'enabled'){
101	$enabled = ' SELECTED';
102	}
103	}
104	else {
105	$disabled = ' SELECTED';
106	}
107	- print qq(<tr><td colspan="2">) . $self->localise('DESC_AJAXPLORER') . qq(</td></tr>);
108	+ print qq(<tr><td colspan="2">) . $self->localise('DESC_PYDIO') . qq(</td></tr>);
109	print qq(<tr><td class="sme-noborders-label">) .
110	- $self->localise('LABEL_AJAXPLORER') . qq(</td>\n);
111	+ $self->localise('LABEL_PYDIO') . qq(</td>\n);
112	print qq(
113	- <td class="sme-noborders-content"><SELECT NAME="ajaxplorer" TYPE="select">
114	+ <td class="sme-noborders-content"><SELECT NAME="pydio" TYPE="select">
115	<OPTION VALUE="disabled"$disabled>) . $self->localise('DISABLED') .
116	qq(<OPTION VALUE="enabled"$enabled>) . $self->localise('ENABLED') .
117	qq(</SELECT></td>
118	@@ -593,7 +593,7 @@
119	smbAccess => $q->param('smbaccess'),
120	httpAccess => $q->param('httpaccess'),
121	WebDav => $q->param('webdav'),
122	- Ajaxplorer => ($q->param('ajaxplorer') \|\| 'disabled'),
123	+ Pydio => ($q->param('pydio') \|\| 'disabled'),
124	RequireSSL => $q->param('requireSSL'),
125	Indexes => $q->param('indexes'),
126	DynamicContent => $q->param('dynamic'),
127	@@ -646,7 +646,7 @@
128	smbAccess => $q->param('smbaccess'),
129	httpAccess => $q->param('httpaccess'),
130	WebDav => $q->param('webdav'),
131	- Ajaxplorer => ($q->param('ajaxplorer') \|\| 'disabled'),
132	+ Pydio => ($q->param('pydio') \|\| 'disabled'),
133	RequireSSL => $q->param('requireSSL'),
134	Indexes => $q->param('indexes'),
135	DynamicContent => $q->param('dynamic'),