smeserver-teamspeak-server/contribs9/smeserver-teamspeak-server-3.1-patch1.patch

diff -ruN smeserver-teamspeak-server-3.1.old/root/etc/e-smith/db/configuration/defaults/teamspeak/UDPPort smeserver-teamspeak-server-3.1/root/etc/e-smith/db/configuration/defaults/teamspeak/UDPPort
--- smeserver-teamspeak-server-3.1.old/root/etc/e-smith/db/configuration/defaults/teamspeak/UDPPort     2018-03-05 13:58:35.286000777 +0100
+++ smeserver-teamspeak-server-3.1/root/etc/e-smith/db/configuration/defaults/teamspeak/UDPPort 2018-03-05 14:21:25.978001236 +0100
@@ -1 +1 @@
-8767
+9987
\ No newline at end of file
diff -ruN smeserver-teamspeak-server-3.1.old/root/etc/rc.d/init.d/teamspeak smeserver-teamspeak-server-3.1/root/etc/rc.d/init.d/teamspeak
--- smeserver-teamspeak-server-3.1.old/root/etc/rc.d/init.d/teamspeak   2018-03-05 13:58:35.286000777 +0100
+++ smeserver-teamspeak-server-3.1/root/etc/rc.d/init.d/teamspeak       2018-03-05 14:07:59.045000741 +0100
@@ -1,101 +1,104 @@
-#! /bin/bash
-# Copyright (c) 2004 TeamSpeak team   All rights reserved.
-#
-# Author: pwk.linuxfan 2004
-# Modified By Sylvain Gomez - sylvaingomez AT free.fr
-#
+#!/bin/bash
+# Copyright (c) 2010 TeamSpeak Systems GmbH
+# All rights reserved
+
 # chkconfig: 345 85 15
 # description: Runs and kills TeamSpeak Voice server at boot time and shutdown.
 # Source function library.
-#. /etc/rc.d/init.d/functions
-
+. /etc/rc.d/init.d/functions
 
 # START OF CONFIG SECTION
 # WARNING ! For security reasons we advise: DO NOT RUN THE SERVER AS ROOT
 USER=teamspeak
-DIR=/opt/teamspeak
 # END OF CONFIG SECTION
 
+COMMANDLINE_PARAMETERS="${2}" #add any command line parameters you want to pass here
+D1=$(readlink -f "$0")
+BINARYPATH="/opt/teamspeak"
+cd "${BINARYPATH}"
+LIBRARYPATH="$(pwd)"
+BINARYNAME="ts3server"
 
 case "$1" in
        start)
-               if [ -e $DIR/tsserver2.pid ]; then
-                       echo "tsserver2.pid already exists...server already started ?";
-                       echo "If you are sure the server is not running, delete tsserver2.pid"
-                       exit 1
-               else
-                       echo "starting the teamspeak2 server"
-                       if [ -e $DIR/server_linux ]; then
-                               if [ ! -x $DIR/server_linux ]; then
-                                       echo "server_linux is not executable, trying to set it"
-                                       chmod u+x $DIR/server_linux
-                               fi
-                               if [ -x $DIR/server_linux ]; then
-          WD=`pwd`
-          cd $DIR
-          su $USER -c "$DIR/server_linux -PID=tsserver2.pid"
-                                       cd $WD
+               if [ -e ts3server.pid ]; then
+                       if ( kill -0 $(cat ts3server.pid) 2> /dev/null ); then
+                               echo "The server is already running, try restart or stop"
+                               exit 1
+                       else
+                               echo "ts3server.pid found, but no server running. Possibly your previously started server crashed"
+                               echo "Please view the logfile for details."
+                               rm ts3server.pid
+                       fi
+               fi
+               echo "Starting the TeamSpeak 3 server"
+               if [ -e "$BINARYNAME" ]; then
+                       if [ ! -x "$BINARYNAME" ]; then
+                               echo "${BINARYNAME} is not executable, trying to set it"
+                               chmod u+x "${BINARYNAME}"
+                       fi
+                       if [ -x "$BINARYNAME" ]; then
+                       
+                       LD_LIBRARY_PATH="${LIBRARYPATH}:${LD_LIBRARY_PATH}" 
+                       exec /usr/local/bin/setuidgid ${USER}  "./${BINARYNAME}" ${COMMANDLINE_PARAMETERS} > /dev/null & PID=$!
+                               ps -p ${PID} > /dev/null 2>&1
+                               if [ "$?" -ne "0" ]; then
+                                       echo "TeamSpeak 3 server could not start"
                                else
-                                       echo "server_linux is not executable, fix this"
-                                       exit 4
+                                       echo $PID > ts3server.pid
+                                       echo "TeamSpeak 3 server started, for details please view the log file"
                                fi
                        else
-                               echo "Couldnt find server_linux"
-                               exit 5
+                               echo "${BINARYNAME} is not exectuable, cannot start TeamSpeak 3 server"
                        fi
+               else
+                       echo "Could not find binary, aborting"
+                       exit 5
                fi
        ;;
-    stop)
-               if [ -e $DIR/tsserver2.pid ]; then
-                       echo -n "stopping the teamspeak2 server"
-                       if ( kill -TERM `cat $DIR/tsserver2.pid` ); then
-                               for c in $(seq 1 300); do
-                                       if [ -e $DIR/tsserver2.pid ]; then
+       stop)
+               if [ -e ts3server.pid ]; then
+                       echo -n "Stopping the TeamSpeak 3 server"
+                       if ( kill -TERM $(cat ts3server.pid) 2> /dev/null ); then
+                               c=1
+                               while [ "$c" -le 300 ]; do
+                                       if ( kill -0 $(cat ts3server.pid) 2> /dev/null ); then
                                                echo -n "."
                                                sleep 1
+                                       else
+                                               break
                                        fi
+                                       c=$(($c+1)) 
                                done
                        fi
-                       if [ -e $DIR/tsserver2.pid ]; then
-                               echo "server does not shutdown cleanly - killing"
-                               kill -KILL `cat $DIR/tsserver2.pid`
-                               rm $DIR/tsserver2.pid
-                               sleep 5
+                       if ( kill -0 $(cat ts3server.pid) 2> /dev/null ); then
+                               echo "Server is not shutting down cleanly - killing"
+                               kill -KILL $(cat ts3server.pid)
                        else
                                echo "done"
                        fi
+                       rm ts3server.pid
                else
-                       echo "tsserver2.pid is missing, no started server ?"
+                       echo "No server running (ts3server.pid is missing)"
                        exit 7
                fi
        ;;
        restart)
-               $0 stop && $0 start || exit 1
+               $0 stop && $0 start ${COMMANDLINE_PARAMETERS} || exit 1
        ;;
        status)
-               if [ -e $DIR/tsserver2.pid ]; then
-                       echo "the server seems to be running"
-                       exit 0
-               else
-                       echo "the server seems to be stopped"
-                       exit 3
-               fi
-       ;;
-       passwords)
-               if [ -e $DIR/server.log ]; then
-                       date=$(cat $DIR/server.log | grep "admin account info: username: admin" | tail -n 1 | sed "s/^\([0-9]\+-[0-9]\+-[0-9]\+ [0-9]\+:[0-9]\+:[0-9]\+\).*$/\1/")
-                       spass=$(cat $DIR/server.log | grep "superadmin account info: username: superadmin" | tail -n 1 | sed "s/^.*username: superadmin password: \([a-z0-9]\+\).*$/\1/")
-                       pass=$(cat $DIR/server.log | grep "admin account info: username: admin" | tail -n 1 | sed "s/^.*username: admin password: \([a-z0-9]\+\).*$/\1/")
-                       echo "Following passwords were generated on $date"
-                       echo "superadmin = \"$spass\""
-                       echo "admin      = \"$pass\""
+               if [ -e ts3server.pid ]; then
+                       if ( kill -0 $(cat ts3server.pid) 2> /dev/null ); then
+                               echo "Server is running"
+                       else
+                               echo "Server seems to have died"
+                       fi
                else
-                       echo "server.log not found, maybe you did not start the server yet ?" 
-                       exit 1
+                       echo "No server running (ts3server.pid is missing)"
                fi
        ;;
        *)
-               echo "Usage: $0 {start|stop|restart|status|passwords}"
+               echo "Usage: ${0} {start|stop|restart|status}"
                exit 2
 esac
 exit 0
1	diff -ruN smeserver-teamspeak-server-3.1.old/root/etc/e-smith/db/configuration/defaults/teamspeak/UDPPort smeserver-teamspeak-server-3.1/root/etc/e-smith/db/configuration/defaults/teamspeak/UDPPort
2	--- smeserver-teamspeak-server-3.1.old/root/etc/e-smith/db/configuration/defaults/teamspeak/UDPPort 2018-03-05 13:58:35.286000777 +0100
3	+++ smeserver-teamspeak-server-3.1/root/etc/e-smith/db/configuration/defaults/teamspeak/UDPPort 2018-03-05 14:21:25.978001236 +0100
4	@@ -1 +1 @@
5	-8767
6	+9987
7	\ No newline at end of file
8	diff -ruN smeserver-teamspeak-server-3.1.old/root/etc/rc.d/init.d/teamspeak smeserver-teamspeak-server-3.1/root/etc/rc.d/init.d/teamspeak
9	--- smeserver-teamspeak-server-3.1.old/root/etc/rc.d/init.d/teamspeak 2018-03-05 13:58:35.286000777 +0100
10	+++ smeserver-teamspeak-server-3.1/root/etc/rc.d/init.d/teamspeak 2018-03-05 14:07:59.045000741 +0100
11	@@ -1,101 +1,104 @@
12	-#! /bin/bash
13	-# Copyright (c) 2004 TeamSpeak team All rights reserved.
14	-#
15	-# Author: pwk.linuxfan 2004
16	-# Modified By Sylvain Gomez - sylvaingomez AT free.fr
17	-#
18	+#!/bin/bash
19	+# Copyright (c) 2010 TeamSpeak Systems GmbH
20	+# All rights reserved
21	+
22	# chkconfig: 345 85 15
23	# description: Runs and kills TeamSpeak Voice server at boot time and shutdown.
24	# Source function library.
25	-#. /etc/rc.d/init.d/functions
26	-
27	+. /etc/rc.d/init.d/functions
28
29	# START OF CONFIG SECTION
30	# WARNING ! For security reasons we advise: DO NOT RUN THE SERVER AS ROOT
31	USER=teamspeak
32	-DIR=/opt/teamspeak
33	# END OF CONFIG SECTION
34
35	+COMMANDLINE_PARAMETERS="${2}" #add any command line parameters you want to pass here
36	+D1=$(readlink -f "$0")
37	+BINARYPATH="/opt/teamspeak"
38	+cd "${BINARYPATH}"
39	+LIBRARYPATH="$(pwd)"
40	+BINARYNAME="ts3server"
41
42	case "$1" in
43	start)
44	- if [ -e $DIR/tsserver2.pid ]; then
45	- echo "tsserver2.pid already exists...server already started ?";
46	- echo "If you are sure the server is not running, delete tsserver2.pid"
47	- exit 1
48	- else
49	- echo "starting the teamspeak2 server"
50	- if [ -e $DIR/server_linux ]; then
51	- if [ ! -x $DIR/server_linux ]; then
52	- echo "server_linux is not executable, trying to set it"
53	- chmod u+x $DIR/server_linux
54	- fi
55	- if [ -x $DIR/server_linux ]; then
56	- WD=`pwd`
57	- cd $DIR
58	- su $USER -c "$DIR/server_linux -PID=tsserver2.pid"
59	- cd $WD
60	+ if [ -e ts3server.pid ]; then
61	+ if ( kill -0 $(cat ts3server.pid) 2> /dev/null ); then
62	+ echo "The server is already running, try restart or stop"
63	+ exit 1
64	+ else
65	+ echo "ts3server.pid found, but no server running. Possibly your previously started server crashed"
66	+ echo "Please view the logfile for details."
67	+ rm ts3server.pid
68	+ fi
69	+ fi
70	+ echo "Starting the TeamSpeak 3 server"
71	+ if [ -e "$BINARYNAME" ]; then
72	+ if [ ! -x "$BINARYNAME" ]; then
73	+ echo "${BINARYNAME} is not executable, trying to set it"
74	+ chmod u+x "${BINARYNAME}"
75	+ fi
76	+ if [ -x "$BINARYNAME" ]; then
77	+
78	+ LD_LIBRARY_PATH="${LIBRARYPATH}:${LD_LIBRARY_PATH}"
79	+ exec /usr/local/bin/setuidgid ${USER} "./${BINARYNAME}" ${COMMANDLINE_PARAMETERS} > /dev/null & PID=$!
80	+ ps -p ${PID} > /dev/null 2>&1
81	+ if [ "$?" -ne "0" ]; then
82	+ echo "TeamSpeak 3 server could not start"
83	else
84	- echo "server_linux is not executable, fix this"
85	- exit 4
86	+ echo $PID > ts3server.pid
87	+ echo "TeamSpeak 3 server started, for details please view the log file"
88	fi
89	else
90	- echo "Couldnt find server_linux"
91	- exit 5
92	+ echo "${BINARYNAME} is not exectuable, cannot start TeamSpeak 3 server"
93	fi
94	+ else
95	+ echo "Could not find binary, aborting"
96	+ exit 5
97	fi
98	;;
99	- stop)
100	- if [ -e $DIR/tsserver2.pid ]; then
101	- echo -n "stopping the teamspeak2 server"
102	- if ( kill -TERM `cat $DIR/tsserver2.pid` ); then
103	- for c in $(seq 1 300); do
104	- if [ -e $DIR/tsserver2.pid ]; then
105	+ stop)
106	+ if [ -e ts3server.pid ]; then
107	+ echo -n "Stopping the TeamSpeak 3 server"
108	+ if ( kill -TERM $(cat ts3server.pid) 2> /dev/null ); then
109	+ c=1
110	+ while [ "$c" -le 300 ]; do
111	+ if ( kill -0 $(cat ts3server.pid) 2> /dev/null ); then
112	echo -n "."
113	sleep 1
114	+ else
115	+ break
116	fi
117	+ c=$(($c+1))
118	done
119	fi
120	- if [ -e $DIR/tsserver2.pid ]; then
121	- echo "server does not shutdown cleanly - killing"
122	- kill -KILL `cat $DIR/tsserver2.pid`
123	- rm $DIR/tsserver2.pid
124	- sleep 5
125	+ if ( kill -0 $(cat ts3server.pid) 2> /dev/null ); then
126	+ echo "Server is not shutting down cleanly - killing"
127	+ kill -KILL $(cat ts3server.pid)
128	else
129	echo "done"
130	fi
131	+ rm ts3server.pid
132	else
133	- echo "tsserver2.pid is missing, no started server ?"
134	+ echo "No server running (ts3server.pid is missing)"
135	exit 7
136	fi
137	;;
138	restart)
139	- $0 stop && $0 start \|\| exit 1
140	+ $0 stop && $0 start ${COMMANDLINE_PARAMETERS} \|\| exit 1
141	;;
142	status)
143	- if [ -e $DIR/tsserver2.pid ]; then
144	- echo "the server seems to be running"
145	- exit 0
146	- else
147	- echo "the server seems to be stopped"
148	- exit 3
149	- fi
150	- ;;
151	- passwords)
152	- if [ -e $DIR/server.log ]; then
153	- date=$(cat $DIR/server.log \| grep "admin account info: username: admin" \| tail -n 1 \| sed "s/^\([0-9]\+-[0-9]\+-[0-9]\+ [0-9]\+:[0-9]\+:[0-9]\+\).*$/\1/")
154	- spass=$(cat $DIR/server.log \| grep "superadmin account info: username: superadmin" \| tail -n 1 \| sed "s/^.username: superadmin password: \([a-z0-9]\+\).$/\1/")
155	- pass=$(cat $DIR/server.log \| grep "admin account info: username: admin" \| tail -n 1 \| sed "s/^.username: admin password: \([a-z0-9]\+\).$/\1/")
156	- echo "Following passwords were generated on $date"
157	- echo "superadmin = \"$spass\""
158	- echo "admin = \"$pass\""
159	+ if [ -e ts3server.pid ]; then
160	+ if ( kill -0 $(cat ts3server.pid) 2> /dev/null ); then
161	+ echo "Server is running"
162	+ else
163	+ echo "Server seems to have died"
164	+ fi
165	else
166	- echo "server.log not found, maybe you did not start the server yet ?"
167	- exit 1
168	+ echo "No server running (ts3server.pid is missing)"
169	fi
170	;;
171	*)
172	- echo "Usage: $0 {start\|stop\|restart\|status\|passwords}"
173	+ echo "Usage: ${0} {start\|stop\|restart\|status}"
174	exit 2
175	esac
176	exit 0