smeserver-teamspeak-server/contribs9/smeserver-teamspeak-server-3.1-patch1.patch

diff -ruN smeserver-teamspeak-server-3.1.old/root/etc/e-smith/db/configuration/defaults/teamspeak/UDPPort smeserver-teamspeak-server-3.1/root/etc/e-smith/db/configuration/defaults/teamspeak/UDPPort
--- smeserver-teamspeak-server-3.1.old/root/etc/e-smith/db/configuration/defaults/teamspeak/UDPPort     2018-03-05 13:58:35.286000777 +0100
+++ smeserver-teamspeak-server-3.1/root/etc/e-smith/db/configuration/defaults/teamspeak/UDPPort 2018-03-05 14:21:25.978001236 +0100
@@ -1 +1 @@
-8767
+9987
\ No newline at end of file
diff -ruN smeserver-teamspeak-server-3.1.old/root/etc/rc.d/init.d/teamspeak smeserver-teamspeak-server-3.1/root/etc/rc.d/init.d/teamspeak
--- smeserver-teamspeak-server-3.1.old/root/etc/rc.d/init.d/teamspeak   2018-03-05 13:58:35.286000777 +0100
+++ smeserver-teamspeak-server-3.1/root/etc/rc.d/init.d/teamspeak       2018-03-05 14:07:59.045000741 +0100
@@ -1,101 +1,104 @@
-#! /bin/bash
-# Copyright (c) 2004 TeamSpeak team   All rights reserved.
-#
-# Author: pwk.linuxfan 2004
-# Modified By Sylvain Gomez - sylvaingomez AT free.fr
-#
+#!/bin/bash
+# Copyright (c) 2010 TeamSpeak Systems GmbH
+# All rights reserved
+
 # chkconfig: 345 85 15
 # description: Runs and kills TeamSpeak Voice server at boot time and shutdown.
 # Source function library.
-#. /etc/rc.d/init.d/functions
-
+. /etc/rc.d/init.d/functions
 
 # START OF CONFIG SECTION
 # WARNING ! For security reasons we advise: DO NOT RUN THE SERVER AS ROOT
 USER=teamspeak
-DIR=/opt/teamspeak
 # END OF CONFIG SECTION
 
+COMMANDLINE_PARAMETERS="${2}" #add any command line parameters you want to pass here
+D1=$(readlink -f "$0")
+BINARYPATH="/opt/teamspeak"
+cd "${BINARYPATH}"
+LIBRARYPATH="$(pwd)"
+BINARYNAME="ts3server"
 
 case "$1" in
        start)
-               if [ -e $DIR/tsserver2.pid ]; then
-                       echo "tsserver2.pid already exists...server already started ?";
-                       echo "If you are sure the server is not running, delete tsserver2.pid"
-                       exit 1
-               else
-                       echo "starting the teamspeak2 server"
-                       if [ -e $DIR/server_linux ]; then
-                               if [ ! -x $DIR/server_linux ]; then
-                                       echo "server_linux is not executable, trying to set it"
-                                       chmod u+x $DIR/server_linux
-                               fi
-                               if [ -x $DIR/server_linux ]; then
-          WD=`pwd`
-          cd $DIR
-          su $USER -c "$DIR/server_linux -PID=tsserver2.pid"
-                                       cd $WD
+               if [ -e ts3server.pid ]; then
+                       if ( kill -0 $(cat ts3server.pid) 2> /dev/null ); then
+                               echo "The server is already running, try restart or stop"
+                               exit 1
+                       else
+                               echo "ts3server.pid found, but no server running. Possibly your previously started server crashed"
+                               echo "Please view the logfile for details."
+                               rm ts3server.pid
+                       fi
+               fi
+               echo "Starting the TeamSpeak 3 server"
+               if [ -e "$BINARYNAME" ]; then
+                       if [ ! -x "$BINARYNAME" ]; then
+                               echo "${BINARYNAME} is not executable, trying to set it"
+                               chmod u+x "${BINARYNAME}"
+                       fi
+                       if [ -x "$BINARYNAME" ]; then
+                       
+                       LD_LIBRARY_PATH="${LIBRARYPATH}:${LD_LIBRARY_PATH}" 
+                       exec /usr/local/bin/setuidgid ${USER}  "./${BINARYNAME}" ${COMMANDLINE_PARAMETERS} > /dev/null & PID=$!
+                               ps -p ${PID} > /dev/null 2>&1
+                               if [ "$?" -ne "0" ]; then
+                                       echo "TeamSpeak 3 server could not start"
                                else
-                                       echo "server_linux is not executable, fix this"
-                                       exit 4
+                                       echo $PID > ts3server.pid
+                                       echo "TeamSpeak 3 server started, for details please view the log file"
                                fi
                        else
-                               echo "Couldnt find server_linux"
-                               exit 5
+                               echo "${BINARYNAME} is not exectuable, cannot start TeamSpeak 3 server"
                        fi
+               else
+                       echo "Could not find binary, aborting"
+                       exit 5
                fi
        ;;
-    stop)
-               if [ -e $DIR/tsserver2.pid ]; then
-                       echo -n "stopping the teamspeak2 server"
-                       if ( kill -TERM `cat $DIR/tsserver2.pid` ); then
-                               for c in $(seq 1 300); do
-                                       if [ -e $DIR/tsserver2.pid ]; then
+       stop)
+               if [ -e ts3server.pid ]; then
+                       echo -n "Stopping the TeamSpeak 3 server"
+                       if ( kill -TERM $(cat ts3server.pid) 2> /dev/null ); then
+                               c=1
+                               while [ "$c" -le 300 ]; do
+                                       if ( kill -0 $(cat ts3server.pid) 2> /dev/null ); then
                                                echo -n "."
                                                sleep 1
+                                       else
+                                               break
                                        fi
+                                       c=$(($c+1)) 
                                done
                        fi
-                       if [ -e $DIR/tsserver2.pid ]; then
-                               echo "server does not shutdown cleanly - killing"
-                               kill -KILL `cat $DIR/tsserver2.pid`
-                               rm $DIR/tsserver2.pid
-                               sleep 5
+                       if ( kill -0 $(cat ts3server.pid) 2> /dev/null ); then
+                               echo "Server is not shutting down cleanly - killing"
+                               kill -KILL $(cat ts3server.pid)
                        else
                                echo "done"
                        fi
+                       rm ts3server.pid
                else
-                       echo "tsserver2.pid is missing, no started server ?"
+                       echo "No server running (ts3server.pid is missing)"
                        exit 7
                fi
        ;;
        restart)
-               $0 stop && $0 start || exit 1
+               $0 stop && $0 start ${COMMANDLINE_PARAMETERS} || exit 1
        ;;
        status)
-               if [ -e $DIR/tsserver2.pid ]; then
-                       echo "the server seems to be running"
-                       exit 0
-               else
-                       echo "the server seems to be stopped"
-                       exit 3
-               fi
-       ;;
-       passwords)
-               if [ -e $DIR/server.log ]; then
-                       date=$(cat $DIR/server.log | grep "admin account info: username: admin" | tail -n 1 | sed "s/^\([0-9]\+-[0-9]\+-[0-9]\+ [0-9]\+:[0-9]\+:[0-9]\+\).*$/\1/")
-                       spass=$(cat $DIR/server.log | grep "superadmin account info: username: superadmin" | tail -n 1 | sed "s/^.*username: superadmin password: \([a-z0-9]\+\).*$/\1/")
-                       pass=$(cat $DIR/server.log | grep "admin account info: username: admin" | tail -n 1 | sed "s/^.*username: admin password: \([a-z0-9]\+\).*$/\1/")
-                       echo "Following passwords were generated on $date"
-                       echo "superadmin = \"$spass\""
-                       echo "admin      = \"$pass\""
+               if [ -e ts3server.pid ]; then
+                       if ( kill -0 $(cat ts3server.pid) 2> /dev/null ); then
+                               echo "Server is running"
+                       else
+                               echo "Server seems to have died"
+                       fi
                else
-                       echo "server.log not found, maybe you did not start the server yet ?" 
-                       exit 1
+                       echo "No server running (ts3server.pid is missing)"
                fi
        ;;
        *)
-               echo "Usage: $0 {start|stop|restart|status|passwords}"
+               echo "Usage: ${0} {start|stop|restart|status}"
                exit 2
 esac
 exit 0
1	jcrisp	1.1	diff -ruN smeserver-teamspeak-server-3.1.old/root/etc/e-smith/db/configuration/defaults/teamspeak/UDPPort smeserver-teamspeak-server-3.1/root/etc/e-smith/db/configuration/defaults/teamspeak/UDPPort
2			--- smeserver-teamspeak-server-3.1.old/root/etc/e-smith/db/configuration/defaults/teamspeak/UDPPort 2018-03-05 13:58:35.286000777 +0100
3			+++ smeserver-teamspeak-server-3.1/root/etc/e-smith/db/configuration/defaults/teamspeak/UDPPort 2018-03-05 14:21:25.978001236 +0100
4			@@ -1 +1 @@
5			-8767
6			+9987
7			\ No newline at end of file
8			diff -ruN smeserver-teamspeak-server-3.1.old/root/etc/rc.d/init.d/teamspeak smeserver-teamspeak-server-3.1/root/etc/rc.d/init.d/teamspeak
9			--- smeserver-teamspeak-server-3.1.old/root/etc/rc.d/init.d/teamspeak 2018-03-05 13:58:35.286000777 +0100
10			+++ smeserver-teamspeak-server-3.1/root/etc/rc.d/init.d/teamspeak 2018-03-05 14:07:59.045000741 +0100
11			@@ -1,101 +1,104 @@
12			-#! /bin/bash
13			-# Copyright (c) 2004 TeamSpeak team All rights reserved.
14			-#
15			-# Author: pwk.linuxfan 2004
16			-# Modified By Sylvain Gomez - sylvaingomez AT free.fr
17			-#
18			+#!/bin/bash
19			+# Copyright (c) 2010 TeamSpeak Systems GmbH
20			+# All rights reserved
21			+
22			# chkconfig: 345 85 15
23			# description: Runs and kills TeamSpeak Voice server at boot time and shutdown.
24			# Source function library.
25			-#. /etc/rc.d/init.d/functions
26			-
27			+. /etc/rc.d/init.d/functions
28
29			# START OF CONFIG SECTION
30			# WARNING ! For security reasons we advise: DO NOT RUN THE SERVER AS ROOT
31			USER=teamspeak
32			-DIR=/opt/teamspeak
33			# END OF CONFIG SECTION
34
35			+COMMANDLINE_PARAMETERS="${2}" #add any command line parameters you want to pass here
36			+D1=$(readlink -f "$0")
37			+BINARYPATH="/opt/teamspeak"
38			+cd "${BINARYPATH}"
39			+LIBRARYPATH="$(pwd)"
40			+BINARYNAME="ts3server"
41
42			case "$1" in
43			start)
44			- if [ -e $DIR/tsserver2.pid ]; then
45			- echo "tsserver2.pid already exists...server already started ?";
46			- echo "If you are sure the server is not running, delete tsserver2.pid"
47			- exit 1
48			- else
49			- echo "starting the teamspeak2 server"
50			- if [ -e $DIR/server_linux ]; then
51			- if [ ! -x $DIR/server_linux ]; then
52			- echo "server_linux is not executable, trying to set it"
53			- chmod u+x $DIR/server_linux
54			- fi
55			- if [ -x $DIR/server_linux ]; then
56			- WD=`pwd`
57			- cd $DIR
58			- su $USER -c "$DIR/server_linux -PID=tsserver2.pid"
59			- cd $WD
60			+ if [ -e ts3server.pid ]; then
61			+ if ( kill -0 $(cat ts3server.pid) 2> /dev/null ); then
62			+ echo "The server is already running, try restart or stop"
63			+ exit 1
64			+ else
65			+ echo "ts3server.pid found, but no server running. Possibly your previously started server crashed"
66			+ echo "Please view the logfile for details."
67			+ rm ts3server.pid
68			+ fi
69			+ fi
70			+ echo "Starting the TeamSpeak 3 server"
71			+ if [ -e "$BINARYNAME" ]; then
72			+ if [ ! -x "$BINARYNAME" ]; then
73			+ echo "${BINARYNAME} is not executable, trying to set it"
74			+ chmod u+x "${BINARYNAME}"
75			+ fi
76			+ if [ -x "$BINARYNAME" ]; then
77			+
78			+ LD_LIBRARY_PATH="${LIBRARYPATH}:${LD_LIBRARY_PATH}"
79			+ exec /usr/local/bin/setuidgid ${USER} "./${BINARYNAME}" ${COMMANDLINE_PARAMETERS} > /dev/null & PID=$!
80			+ ps -p ${PID} > /dev/null 2>&1
81			+ if [ "$?" -ne "0" ]; then
82			+ echo "TeamSpeak 3 server could not start"
83			else
84			- echo "server_linux is not executable, fix this"
85			- exit 4
86			+ echo $PID > ts3server.pid
87			+ echo "TeamSpeak 3 server started, for details please view the log file"
88			fi
89			else
90			- echo "Couldnt find server_linux"
91			- exit 5
92	jcrisp	1.2	+ echo "${BINARYNAME} is not exectuable, cannot start TeamSpeak 3 server"
93	jcrisp	1.1	fi
94			+ else
95			+ echo "Could not find binary, aborting"
96			+ exit 5
97			fi
98			;;
99			- stop)
100			- if [ -e $DIR/tsserver2.pid ]; then
101			- echo -n "stopping the teamspeak2 server"
102			- if ( kill -TERM `cat $DIR/tsserver2.pid` ); then
103			- for c in $(seq 1 300); do
104			- if [ -e $DIR/tsserver2.pid ]; then
105			+ stop)
106			+ if [ -e ts3server.pid ]; then
107			+ echo -n "Stopping the TeamSpeak 3 server"
108			+ if ( kill -TERM $(cat ts3server.pid) 2> /dev/null ); then
109			+ c=1
110			+ while [ "$c" -le 300 ]; do
111			+ if ( kill -0 $(cat ts3server.pid) 2> /dev/null ); then
112			echo -n "."
113			sleep 1
114			+ else
115			+ break
116			fi
117			+ c=$(($c+1))
118			done
119			fi
120			- if [ -e $DIR/tsserver2.pid ]; then
121			- echo "server does not shutdown cleanly - killing"
122			- kill -KILL `cat $DIR/tsserver2.pid`
123			- rm $DIR/tsserver2.pid
124			- sleep 5
125			+ if ( kill -0 $(cat ts3server.pid) 2> /dev/null ); then
126			+ echo "Server is not shutting down cleanly - killing"
127			+ kill -KILL $(cat ts3server.pid)
128			else
129			echo "done"
130			fi
131			+ rm ts3server.pid
132			else
133			- echo "tsserver2.pid is missing, no started server ?"
134			+ echo "No server running (ts3server.pid is missing)"
135			exit 7
136			fi
137			;;
138			restart)
139			- $0 stop && $0 start \|\| exit 1
140			+ $0 stop && $0 start ${COMMANDLINE_PARAMETERS} \|\| exit 1
141			;;
142			status)
143			- if [ -e $DIR/tsserver2.pid ]; then
144			- echo "the server seems to be running"
145			- exit 0
146			- else
147			- echo "the server seems to be stopped"
148			- exit 3
149			- fi
150			- ;;
151			- passwords)
152			- if [ -e $DIR/server.log ]; then
153			- date=$(cat $DIR/server.log \| grep "admin account info: username: admin" \| tail -n 1 \| sed "s/^\([0-9]\+-[0-9]\+-[0-9]\+ [0-9]\+:[0-9]\+:[0-9]\+\).*$/\1/")
154			- spass=$(cat $DIR/server.log \| grep "superadmin account info: username: superadmin" \| tail -n 1 \| sed "s/^.username: superadmin password: \([a-z0-9]\+\).$/\1/")
155			- pass=$(cat $DIR/server.log \| grep "admin account info: username: admin" \| tail -n 1 \| sed "s/^.username: admin password: \([a-z0-9]\+\).$/\1/")
156			- echo "Following passwords were generated on $date"
157			- echo "superadmin = \"$spass\""
158			- echo "admin = \"$pass\""
159			+ if [ -e ts3server.pid ]; then
160			+ if ( kill -0 $(cat ts3server.pid) 2> /dev/null ); then
161			+ echo "Server is running"
162			+ else
163			+ echo "Server seems to have died"
164			+ fi
165			else
166			- echo "server.log not found, maybe you did not start the server yet ?"
167			- exit 1
168			+ echo "No server running (ts3server.pid is missing)"
169			fi
170			;;
171			*)
172			- echo "Usage: $0 {start\|stop\|restart\|status\|passwords}"
173			+ echo "Usage: ${0} {start\|stop\|restart\|status}"
174			exit 2
175			esac
176			exit 0