smeserver-vacation/contribs9/smeserver-vacation-1.1-locale-2015-09-12.patch

--- smeserver-vacation-1.1/root/etc/e-smith/locale/bg/etc/e-smith/web/functions/uservacations   2013-11-13 11:39:48.000000000 +0100
+++ smeserver-vacation-1.1.update/root/etc/e-smith/locale/bg/etc/e-smith/web/functions/uservacations    2015-09-12 02:39:34.776857539 +0200
@@ -21,7 +21,15 @@
     </entry>
     <entry>
       <base>MODIFY_DESCRIPTION</base>
-      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain. To change the vacation message back to the default type "reset". </p> ]]></trans>
+      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain by replacing the domain part of the sender address in the first line of the message with the virtual domain name (eg. replace the default "From: user@primary.domain" with "From: user@virtual.domain"). To change the vacation message back to the default type "reset". </p> <p> You can also fill out the "Enable vacation on" and "Disable vacation on" fields in order to automatically enable and disable sending of the vacation message for this user account on the given dates. </p> <p> The format used is YYYYMMDD (four digit year, two digit month, two digit day) and the dates in the two fields must not be the same. If you want to use this functionality, leave the "Enable vacation messages" setting at "No" - it will be automatically activated based on the date given. </p> </p> ]]></trans>
+    </entry>
+    <entry>
+      <base>VACATION_FROM</base>
+      <trans>Enable vacation on (YYYYMMDD)</trans>
+    </entry>
+    <entry>
+      <base>VACATION_TO</base>
+      <trans>Disable vacation on (YYYYMMDD)</trans>
     </entry>
     <entry>
       <base>MESSAGE</base>
--- smeserver-vacation-1.1/root/etc/e-smith/locale/da/etc/e-smith/web/functions/uservacations   2013-11-13 11:39:48.000000000 +0100
+++ smeserver-vacation-1.1.update/root/etc/e-smith/locale/da/etc/e-smith/web/functions/uservacations    2015-09-12 02:39:34.853857543 +0200
@@ -21,7 +21,15 @@
     </entry>
     <entry>
       <base>MODIFY_DESCRIPTION</base>
-      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain. To change the vacation message back to the default type "reset". </p> ]]></trans>
+      <trans><![CDATA[ <p> Skriv en fraværsbesked her. Du kan bruge "$SUBJECT" overalt i teksten som vil blive erstattet med indholdet i emnelinjen i den e mail som har aktiveret autosvaret. </p> <p> Denne besked skal bestå af to dele, adskilt af en blank linje. Den først del vil blive integreret ind i overskriften på e mail svaret, du må derfor sikre dig, at du indsætter mindst én blank linje før du skriver din besked.</p> <p> Det primære domæne bliver automatisk tilføjet til adressen, eller du kan indsætte et virtuelt domæne ved at erstatte domæne delen i afsender adressen i den første linje med det virtuelle navn (f.eks. erstat standard "Fra: user@primære.domæne" med "Fra: bruger@virtuelt.domæne"). For at skifte fraværsbeskeden tilbage til standard, skal du skrive "reset". </p> ]]></trans>
+    </entry>
+    <entry>
+      <base>VACATION_FROM</base>
+      <trans>Aktiver fraværsbesked</trans>
+    </entry>
+    <entry>
+      <base>VACATION_TO</base>
+      <trans>Disable vacation on (YYYYMMDD)</trans>
     </entry>
     <entry>
       <base>MESSAGE</base>
@@ -40,6 +48,6 @@
     and don't translate $SUBJECT -->
     <entry>
       <base>AWAY_FROM_MAIL</base>
-      <trans><![CDATA[ Subject: Re: $SUBJECT - Away from my email <p> I will not be reading my mail for a while. Your mail regarding </p><p> $SUBJECT </p><p> will be read when I return. </p> ]]></trans>
+      <trans><![CDATA[ Emne: Sv: $SUBJECT - Væk fra mine e-mail <p> jeg kan ikke læse mine e mail i et stykke tid. Din e-mail om </p><p> $SUBJECT </p><p> vil jeg først læse, når jeg kommer tilbage. </p> ]]></trans>
     </entry>
 </lexicon>
--- smeserver-vacation-1.1/root/etc/e-smith/locale/de/etc/e-smith/web/functions/uservacations   2015-09-12 02:10:37.216667654 +0200
+++ smeserver-vacation-1.1.update/root/etc/e-smith/locale/de/etc/e-smith/web/functions/uservacations    2015-09-12 02:39:34.929857547 +0200
@@ -1,7 +1,7 @@
 <lexicon lang="de">
     <entry>
       <base>User vacations</base>
-      <trans>Abwesenheitsnotiz</trans>
+      <trans>Abwesenheitsnotizen</trans>
     </entry>
     <entry>
       <base>Vacation Message</base>
@@ -9,51 +9,27 @@
     </entry>
     <entry>
       <base>FORM_TITLE</base>
-      <trans><![CDATA[ Einstellungen zur Benutzerabwesenheit ändern <p> <align=right><a target="new" href="http://contribs.org/modules/phpwiki/index.php/Handbuch%20Deutsch%3A%20Erweiterungen%20%28contribs%29#x31.x2e.2x20.Abwesenheitsnotiz">Online-Handbuch</a> ]]></trans>
+      <trans>Einstellungen zur Benutzerabwesenheit ändern</trans>
     </entry>
     <entry>
       <base>DESCRIPTION</base>
-      <trans>Die Abwesenheitsnotiz eines Benutzers können Sie ändern, wenn Sie rechts neben dem Benutzerkonto klicken.</trans>
+      <trans>Die Abwesenheitsnotiz eines Benutzers können Sie ändern, indem Sie auf den Link rechts neben dem jeweiligen Benutzernamen klicken.</trans>
     </entry>
     <entry>
       <base>LABEL_VACATION</base>
-      <trans>Notiz</trans>
+      <trans>Abwesenheitsnotiz</trans>
     </entry>
     <entry>
       <base>MODIFY_DESCRIPTION</base>
-      <trans><![CDATA[ 
-          <p>
-             Geben Sie hier eine Abwesenheitsnachricht an. Sie können die Variable "$SUBJECT" an beliebiger Stelle im Nachrichtentext einfügen. An dieser Stelle wird in der generierten Abwsenheitsnachricht der Betreff derjenigen empfangenen Nachricht erscheinen, welche die automatische Abwesenheitsnachricht ausgelöst hat.
-          </p>
-          <p>
-             Der Text der Abwesenheitsnachricht sollte aus zwei Teilen bestehen, die voneinander durch eine Leerzeile getrennt sind.
-             Der obere Teil wird in den Header der generierten Abwesenheitsnachricht eingefügt.
-             Vor dem eigentlichen Inhalt der Abwesenheitsnachricht muss also auf jeden Fall eine Leerzeile stehen.
-          </p>
-          <p>
-             Die primäre Domain wird der Absenderadresse automatisch hinzugefügt. Sie können aber im "From:"-Header auch eine virtuelle Domäne verwenden.
-             Um die Abwesenheitsnachricht auf den Standardtext zurückzusetzen geben Sie bitte "reset" ein.
-          </p>
-          <p>
-             Sie können zusätzlich die entsprechenden Felder ausfüllen, um das Versenden der Abwesenheitsnachricht
-             für diesen Benutzer-Account zum jeweiligen Datum automatisch zu aktivieren und zu deaktivieren.
-          </p>
-          <p>
-             Bitte verwenden Sie dafür das Format JJJJMMTT (vierstellige Jahreszahl, zweistellige Monatszahl, zweistellige Tageszahl)
-             und beachten Sie, dass die Sie in die beiden Felder nicht das gleiche Datum eintragen dürfen.
-          </p>
-          <p>
-             Wenn Sie diese Funktionalität verwenden möchten dann belassen Sie den Eintrag "Abwesenheitsnotiz aktivieren" auf "Nein"; die Aktivierung erfolgt dann automatisch am gewünschten Datum.
-          </p>
- ]]></trans>
+      <trans><![CDATA[ <p> Geben Sie eine Abwesenheitsnotiz ein. Der Parameter <b>"$SUBJECT"</b> enthält den Betreff der empfangenen E-Mail und kann an beliebiger Stelle im Text der automatischen Antwort platziert werden. </p> <p>Eine vollständige Abwesenheitsnotiz besteht aus zwei Teilen, die voneinander durch eine Leerzeile getrennt sein müssen: der gesamte Text bis zur ersten freien Zeile wird in die Kopfzeile der E-Mail-Antwort aufgenommen. Lassen Sie deshalb mindestens eine Zeile frei, bevor Sie den eigentlichen Text Ihrer Abwesenheitsnotiz eingeben. </p> <p> Die Haupt-Domäne wird der Adresse automatisch hinzugefügt. Sie können aber auch eine Adresse aus einer virtuellen Domäne verwenden, indem Sie für die Absenderadresse in der ersten Zeile der Abwesenheitsnotiz die Hauptdomäne durch eine virtuelle Domäne ersetzen (ersetzen Sie z.B. die voreingestellte Adresse: "Von: benutzer@hauptdomaene.xx"  durch "Von: benutzer@virtuelledomaene.xx"). Um die Abwesenheitsnotiz auf den Standard-Text zurück zu setzen geben sie "reset" ein.</p> ]]></trans>
     </entry>
     <entry>
-       <base>VACATION_FROM</base>
-       <trans>Abwesenheitsnotiz aktivieren am (JJJJMMTT)</trans>
+      <base>VACATION_FROM</base>
+      <trans>Abwesenheitsnotiz aktivieren</trans>
     </entry>
     <entry>
-       <base>VACATION_TO</base>
-       <trans>Abwesenheitsnotiz deaktivieren am (JJJJMMTT)</trans>
+      <base>VACATION_TO</base>
+      <trans>Disable vacation on (YYYYMMDD)</trans>
     </entry>
     <entry>
       <base>MESSAGE</base>
@@ -61,7 +37,7 @@
     </entry>
     <entry>
       <base>VACATION_STATUS</base>
-      <trans>Abwesenheitsnotiz aktiviert</trans>
+      <trans>Abwesenheitsnotiz aktivieren</trans>
     </entry>
     <entry>
       <base>FROM</base>
@@ -72,6 +48,8 @@
     and don't translate $SUBJECT -->
     <entry>
       <base>AWAY_FROM_MAIL</base>
-      <trans><![CDATA[ Subject: Re: $SUBJECT - Away from my email <p> I will not be reading my mail for a while. Your mail regarding </p><p> $SUBJECT </p><p> will be read when I return. </p> ]]></trans>
+      <trans><![CDATA[ Subject: Abwesenheitsnotiz 
+
+<p>Guten Tag,</p><p> vielen Dank für Ihre E-Mail mit dem Betreff </p><p>$SUBJECT </p><p>Von TT.MM.JJ bis TT.MM.JJ bin ich nicht erreichbar. In dringenden Fällen rufen sie bitte +49 30 4711 4711 an. Herzliche Grüße Hans Mustermann </p> ]]></trans>
     </entry>
 </lexicon>
--- smeserver-vacation-1.1/root/etc/e-smith/locale/el/etc/e-smith/web/functions/uservacations   2013-11-13 11:39:48.000000000 +0100
+++ smeserver-vacation-1.1.update/root/etc/e-smith/locale/el/etc/e-smith/web/functions/uservacations    2015-09-12 02:39:35.003857551 +0200
@@ -21,7 +21,15 @@
     </entry>
     <entry>
       <base>MODIFY_DESCRIPTION</base>
-      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain. To change the vacation message back to the default type "reset". </p> ]]></trans>
+      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain by replacing the domain part of the sender address in the first line of the message with the virtual domain name (eg. replace the default "From: user@primary.domain" with "From: user@virtual.domain"). To change the vacation message back to the default type "reset". </p> <p> You can also fill out the "Enable vacation on" and "Disable vacation on" fields in order to automatically enable and disable sending of the vacation message for this user account on the given dates. </p> <p> The format used is YYYYMMDD (four digit year, two digit month, two digit day) and the dates in the two fields must not be the same. If you want to use this functionality, leave the "Enable vacation messages" setting at "No" - it will be automatically activated based on the date given. </p> </p> ]]></trans>
+    </entry>
+    <entry>
+      <base>VACATION_FROM</base>
+      <trans>Enable vacation on (YYYYMMDD)</trans>
+    </entry>
+    <entry>
+      <base>VACATION_TO</base>
+      <trans>Disable vacation on (YYYYMMDD)</trans>
     </entry>
     <entry>
       <base>MESSAGE</base>
--- smeserver-vacation-1.1/root/etc/e-smith/locale/es/etc/e-smith/web/functions/uservacations   2013-11-13 11:39:48.000000000 +0100
+++ smeserver-vacation-1.1.update/root/etc/e-smith/locale/es/etc/e-smith/web/functions/uservacations    2015-09-12 02:39:35.083857556 +0200
@@ -21,7 +21,15 @@
     </entry>
     <entry>
       <base>MODIFY_DESCRIPTION</base>
-      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain. To change the vacation message back to the default type "reset". </p> ]]></trans>
+      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain by replacing the domain part of the sender address in the first line of the message with the virtual domain name (eg. replace the default "From: user@primary.domain" with "From: user@virtual.domain"). To change the vacation message back to the default type "reset". </p> <p> You can also fill out the "Enable vacation on" and "Disable vacation on" fields in order to automatically enable and disable sending of the vacation message for this user account on the given dates. </p> <p> The format used is YYYYMMDD (four digit year, two digit month, two digit day) and the dates in the two fields must not be the same. If you want to use this functionality, leave the "Enable vacation messages" setting at "No" - it will be automatically activated based on the date given. </p> </p> ]]></trans>
+    </entry>
+    <entry>
+      <base>VACATION_FROM</base>
+      <trans>Habilitar ausencia</trans>
+    </entry>
+    <entry>
+      <base>VACATION_TO</base>
+      <trans>Disable vacation on (YYYYMMDD)</trans>
     </entry>
     <entry>
       <base>MESSAGE</base>
--- smeserver-vacation-1.1/root/etc/e-smith/locale/et/etc/e-smith/web/functions/uservacations   2013-11-13 11:39:48.000000000 +0100
+++ smeserver-vacation-1.1.update/root/etc/e-smith/locale/et/etc/e-smith/web/functions/uservacations    2015-09-12 02:39:35.156857560 +0200
@@ -24,6 +24,14 @@
       <trans><![CDATA[ <p> Sisesta automaatvastus siia. Võid kasutada "$SUBJECT" ükskõik kus tekstis teema asendatatkse automaatselt kui  automaatvastus aktiveeritakse</p> <p> Teade tuleb koostada kahes osas mis on eraldatatud tühja reaga. Esimene osa lisatakse kirja päisesse meilile vastamisel teise  kirjutatatakse kirja sisu. Jälgi, et kirja sisu vahele jääks vähmalt üks tühi rida </p> <p> Peamine domeeni nimi lisatakse automaatselt, sa võid lisada ka virtuaalseid domeene. Automaatvastuses tehtud muudatuste tühistamiseks trüki "reset". </p> ]]></trans>
     </entry>
     <entry>
+      <base>VACATION_FROM</base>
+      <trans>Luba automaatvastus</trans>
+    </entry>
+    <entry>
+      <base>VACATION_TO</base>
+      <trans>Disable vacation on (YYYYMMDD)</trans>
+    </entry>
+    <entry>
       <base>MESSAGE</base>
       <trans>Automaatvastuse teade</trans>
     </entry>
--- smeserver-vacation-1.1/root/etc/e-smith/locale/fr/etc/e-smith/web/functions/uservacations   2013-11-13 11:39:48.000000000 +0100
+++ smeserver-vacation-1.1.update/root/etc/e-smith/locale/fr/etc/e-smith/web/functions/uservacations    2015-09-12 02:39:35.232857564 +0200
@@ -21,7 +21,15 @@
     </entry>
     <entry>
       <base>MODIFY_DESCRIPTION</base>
-      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain. To change the vacation message back to the default type "reset". </p> ]]></trans>
+      <trans><![CDATA[ <p> Tapez votre message d'absence ici. Vous pouvez utiliser à votre guise dans ce message le terme "$SUBJECT" : il sera remplacé dans la réponse automatique par le sujet du courriel auquel il fait référence. </p> <p> Ce message doit être composé de deux parties séparées par une ligne vide. La première sera intégrée aux en-têtes du courriel de réponse ; vous devez donc vous assurer de laisser au moins une ligne vide avant de taper votre message d'absence. </p> <p> Par défaut, l'adresse de courriel de l'utilisateur sera celle du domaine principal, mais vous pouvez la redéfinir avec un domaine virtuel en remplaçant la partie de domaine de l'adresse de l'expéditeur dans la première ligne du message, avec le nom de domaine virtuel (par exemple remplacer le défaut "From: user@primary.domain" avec "From: user@virtual.domain"). Pour revenir au message d'absence par défaut, tapez "reset". </p> ]]></trans>
+    </entry>
+    <entry>
+      <base>VACATION_FROM</base>
+      <trans>Activer le message d'absence</trans>
+    </entry>
+    <entry>
+      <base>VACATION_TO</base>
+      <trans>Disable vacation on (YYYYMMDD)</trans>
     </entry>
     <entry>
       <base>MESSAGE</base>
@@ -40,6 +48,6 @@
     and don't translate $SUBJECT -->
     <entry>
       <base>AWAY_FROM_MAIL</base>
-      <trans><![CDATA[ Subject: Re: $SUBJECT - Away from my email <p> I will not be reading my mail for a while. Your mail regarding </p><p> $SUBJECT </p><p> will be read when I return. </p> ]]></trans>
+      <trans><![CDATA[ Subject: Re: $SUBJECT - Je suis actuellement absent(e) Je n'ai, pour l'instant, pas accès à ma messagerie. Je n'aurais connaissance qu'à mon retour de votre courriel concernant : $SUBJECT]]></trans>
     </entry>
 </lexicon>
--- smeserver-vacation-1.1/root/etc/e-smith/locale/he/etc/e-smith/web/functions/uservacations   2013-11-13 11:39:48.000000000 +0100
+++ smeserver-vacation-1.1.update/root/etc/e-smith/locale/he/etc/e-smith/web/functions/uservacations    2015-09-12 02:39:35.309857568 +0200
@@ -21,7 +21,15 @@
     </entry>
     <entry>
       <base>MODIFY_DESCRIPTION</base>
-      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain. To change the vacation message back to the default type "reset". </p> ]]></trans>
+      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain by replacing the domain part of the sender address in the first line of the message with the virtual domain name (eg. replace the default "From: user@primary.domain" with "From: user@virtual.domain"). To change the vacation message back to the default type "reset". </p> <p> You can also fill out the "Enable vacation on" and "Disable vacation on" fields in order to automatically enable and disable sending of the vacation message for this user account on the given dates. </p> <p> The format used is YYYYMMDD (four digit year, two digit month, two digit day) and the dates in the two fields must not be the same. If you want to use this functionality, leave the "Enable vacation messages" setting at "No" - it will be automatically activated based on the date given. </p> </p> ]]></trans>
+    </entry>
+    <entry>
+      <base>VACATION_FROM</base>
+      <trans>Enable vacation on (YYYYMMDD)</trans>
+    </entry>
+    <entry>
+      <base>VACATION_TO</base>
+      <trans>Disable vacation on (YYYYMMDD)</trans>
     </entry>
     <entry>
       <base>MESSAGE</base>
--- smeserver-vacation-1.1/root/etc/e-smith/locale/hu/etc/e-smith/web/functions/uservacations   2013-11-13 11:39:48.000000000 +0100
+++ smeserver-vacation-1.1.update/root/etc/e-smith/locale/hu/etc/e-smith/web/functions/uservacations    2015-09-12 02:39:35.384857572 +0200
@@ -21,7 +21,15 @@
     </entry>
     <entry>
       <base>MODIFY_DESCRIPTION</base>
-      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain. To change the vacation message back to the default type "reset". </p> ]]></trans>
+      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain by replacing the domain part of the sender address in the first line of the message with the virtual domain name (eg. replace the default "From: user@primary.domain" with "From: user@virtual.domain"). To change the vacation message back to the default type "reset". </p> <p> You can also fill out the "Enable vacation on" and "Disable vacation on" fields in order to automatically enable and disable sending of the vacation message for this user account on the given dates. </p> <p> The format used is YYYYMMDD (four digit year, two digit month, two digit day) and the dates in the two fields must not be the same. If you want to use this functionality, leave the "Enable vacation messages" setting at "No" - it will be automatically activated based on the date given. </p> </p> ]]></trans>
+    </entry>
+    <entry>
+      <base>VACATION_FROM</base>
+      <trans>Enable vacation on (YYYYMMDD)</trans>
+    </entry>
+    <entry>
+      <base>VACATION_TO</base>
+      <trans>Disable vacation on (YYYYMMDD)</trans>
     </entry>
     <entry>
       <base>MESSAGE</base>
--- smeserver-vacation-1.1/root/etc/e-smith/locale/id/etc/e-smith/web/functions/uservacations   2013-11-13 11:39:48.000000000 +0100
+++ smeserver-vacation-1.1.update/root/etc/e-smith/locale/id/etc/e-smith/web/functions/uservacations    2015-09-12 02:39:35.447857576 +0200
@@ -21,7 +21,15 @@
     </entry>
     <entry>
       <base>MODIFY_DESCRIPTION</base>
-      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain. To change the vacation message back to the default type "reset". </p> ]]></trans>
+      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain by replacing the domain part of the sender address in the first line of the message with the virtual domain name (eg. replace the default "From: user@primary.domain" with "From: user@virtual.domain"). To change the vacation message back to the default type "reset". </p> <p> You can also fill out the "Enable vacation on" and "Disable vacation on" fields in order to automatically enable and disable sending of the vacation message for this user account on the given dates. </p> <p> The format used is YYYYMMDD (four digit year, two digit month, two digit day) and the dates in the two fields must not be the same. If you want to use this functionality, leave the "Enable vacation messages" setting at "No" - it will be automatically activated based on the date given. </p> </p> ]]></trans>
+    </entry>
+    <entry>
+      <base>VACATION_FROM</base>
+      <trans>Enable-kan pesan liburan</trans>
+    </entry>
+    <entry>
+      <base>VACATION_TO</base>
+      <trans>Disable vacation on (YYYYMMDD)</trans>
     </entry>
     <entry>
       <base>MESSAGE</base>
--- smeserver-vacation-1.1/root/etc/e-smith/locale/it/etc/e-smith/web/functions/uservacations   2013-11-13 11:39:48.000000000 +0100
+++ smeserver-vacation-1.1.update/root/etc/e-smith/locale/it/etc/e-smith/web/functions/uservacations    2015-09-12 02:39:35.524857580 +0200
@@ -21,7 +21,15 @@
     </entry>
     <entry>
       <base>MODIFY_DESCRIPTION</base>
-      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain. To change the vacation message back to the default type "reset". </p> ]]></trans>
+      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain by replacing the domain part of the sender address in the first line of the message with the virtual domain name (eg. replace the default "From: user@primary.domain" with "From: user@virtual.domain"). To change the vacation message back to the default type "reset". </p> <p> You can also fill out the "Enable vacation on" and "Disable vacation on" fields in order to automatically enable and disable sending of the vacation message for this user account on the given dates. </p> <p> The format used is YYYYMMDD (four digit year, two digit month, two digit day) and the dates in the two fields must not be the same. If you want to use this functionality, leave the "Enable vacation messages" setting at "No" - it will be automatically activated based on the date given. </p> </p> ]]></trans>
+    </entry>
+    <entry>
+      <base>VACATION_FROM</base>
+      <trans>Abilita messaggio utente assente</trans>
+    </entry>
+    <entry>
+      <base>VACATION_TO</base>
+      <trans>Disable vacation on (YYYYMMDD)</trans>
     </entry>
     <entry>
       <base>MESSAGE</base>
--- smeserver-vacation-1.1/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/uservacations   2013-11-13 11:39:48.000000000 +0100
+++ smeserver-vacation-1.1.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/uservacations    2015-09-12 02:39:35.600857584 +0200
@@ -21,7 +21,15 @@
     </entry>
     <entry>
       <base>MODIFY_DESCRIPTION</base>
-      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain. To change the vacation message back to the default type "reset". </p> ]]></trans>
+      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain by replacing the domain part of the sender address in the first line of the message with the virtual domain name (eg. replace the default "From: user@primary.domain" with "From: user@virtual.domain"). To change the vacation message back to the default type "reset". </p> <p> You can also fill out the "Enable vacation on" and "Disable vacation on" fields in order to automatically enable and disable sending of the vacation message for this user account on the given dates. </p> <p> The format used is YYYYMMDD (four digit year, two digit month, two digit day) and the dates in the two fields must not be the same. If you want to use this functionality, leave the "Enable vacation messages" setting at "No" - it will be automatically activated based on the date given. </p> </p> ]]></trans>
+    </entry>
+    <entry>
+      <base>VACATION_FROM</base>
+      <trans>Enable vacation on (YYYYMMDD)</trans>
+    </entry>
+    <entry>
+      <base>VACATION_TO</base>
+      <trans>Disable vacation on (YYYYMMDD)</trans>
     </entry>
     <entry>
       <base>MESSAGE</base>
--- smeserver-vacation-1.1/root/etc/e-smith/locale/nb/etc/e-smith/web/functions/uservacations   2013-11-13 11:39:48.000000000 +0100
+++ smeserver-vacation-1.1.update/root/etc/e-smith/locale/nb/etc/e-smith/web/functions/uservacations    2015-09-12 02:39:35.681857588 +0200
@@ -21,7 +21,15 @@
     </entry>
     <entry>
       <base>MODIFY_DESCRIPTION</base>
-      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain. To change the vacation message back to the default type "reset". </p> ]]></trans>
+      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain by replacing the domain part of the sender address in the first line of the message with the virtual domain name (eg. replace the default "From: user@primary.domain" with "From: user@virtual.domain"). To change the vacation message back to the default type "reset". </p> <p> You can also fill out the "Enable vacation on" and "Disable vacation on" fields in order to automatically enable and disable sending of the vacation message for this user account on the given dates. </p> <p> The format used is YYYYMMDD (four digit year, two digit month, two digit day) and the dates in the two fields must not be the same. If you want to use this functionality, leave the "Enable vacation messages" setting at "No" - it will be automatically activated based on the date given. </p> </p> ]]></trans>
+    </entry>
+    <entry>
+      <base>VACATION_FROM</base>
+      <trans>Enable vacation on (YYYYMMDD)</trans>
+    </entry>
+    <entry>
+      <base>VACATION_TO</base>
+      <trans>Disable vacation on (YYYYMMDD)</trans>
     </entry>
     <entry>
       <base>MESSAGE</base>
--- smeserver-vacation-1.1/root/etc/e-smith/locale/nl/etc/e-smith/web/functions/uservacations   2013-11-13 11:39:48.000000000 +0100
+++ smeserver-vacation-1.1.update/root/etc/e-smith/locale/nl/etc/e-smith/web/functions/uservacations    2015-09-12 02:39:35.764857593 +0200
@@ -5,7 +5,7 @@
     </entry>
     <entry>
       <base>Vacation Message</base>
-      <trans>Afwezigeheidsbericht</trans>
+      <trans>Afwezigheidsbericht</trans>
     </entry>
     <entry>
       <base>FORM_TITLE</base>
@@ -21,7 +21,15 @@
     </entry>
     <entry>
       <base>MODIFY_DESCRIPTION</base>
-      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain. To change the vacation message back to the default type "reset". </p> ]]></trans>
+      <trans><![CDATA[ <p> Voer uw afwezigheidsbericht hier in. U kunt "$SUBJECT" overal in de tekst gebruiken, het zal worden vervangen door de onderwerp regel van de e-mail welke deze automatische antwoord service heeft geactiveerd. </p> <p> Het bericht dient uit twee delen te bestaan, gescheiden door een lege regel. Het eerste deel wordt geïntegreerd in de kopregels van de antwoord e-mail, zorg er vervolgens voor dat er minimaal een lege regel aanwezig is voor dat het bericht wordt getypt. </p> <p> De primaire domeinnaam wordt automatisch toegevoegd aan het adres, of er kan een virtueel domein worden gebruikt door het vervangen van het domein gedeelte van het afzender adres in de eerste regel van het bericht met dit virtuele domein (bijv. de standaard "From: user@primary.domain" te vervangen door "From: user@virtual.domain"). Om het standaard afwezigheidsbericht te herstellen dient u "reset" in te typen. </p> ]]></trans>
+    </entry>
+    <entry>
+      <base>VACATION_FROM</base>
+      <trans>Afwezigheidsbericht activeren</trans>
+    </entry>
+    <entry>
+      <base>VACATION_TO</base>
+      <trans>Disable vacation on (YYYYMMDD)</trans>
     </entry>
     <entry>
       <base>MESSAGE</base>
@@ -29,7 +37,7 @@
     </entry>
     <entry>
       <base>VACATION_STATUS</base>
-      <trans>Afwezigeheidsbericht activeren</trans>
+      <trans>Afwezigheidsbericht activeren</trans>
     </entry>
     <entry>
       <base>FROM</base>
@@ -40,6 +48,6 @@
     and don't translate $SUBJECT -->
     <entry>
       <base>AWAY_FROM_MAIL</base>
-      <trans><![CDATA[ Subject: Re: $SUBJECT - Away from my email <p> I will not be reading my mail for a while. Your mail regarding </p><p> $SUBJECT </p><p> will be read when I return. </p> ]]></trans>
+      <trans><![CDATA[ Onderwerp: Re: $SUBJECT - Afwezigheidsbericht <p> Ik ben op het moment niet in staat uw e-mail betreffende </p><p> $SUBJECT </p> te lezen<p> Zodra ik weer terug ben zal ik deze lezen.</p> ]]></trans>
     </entry>
 </lexicon>
--- smeserver-vacation-1.1/root/etc/e-smith/locale/pl/etc/e-smith/web/functions/uservacations   2013-11-13 11:39:48.000000000 +0100
+++ smeserver-vacation-1.1.update/root/etc/e-smith/locale/pl/etc/e-smith/web/functions/uservacations    2015-09-12 02:39:35.887857600 +0200
@@ -21,7 +21,15 @@
     </entry>
     <entry>
       <base>MODIFY_DESCRIPTION</base>
-      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain. To change the vacation message back to the default type "reset". </p> ]]></trans>
+      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain by replacing the domain part of the sender address in the first line of the message with the virtual domain name (eg. replace the default "From: user@primary.domain" with "From: user@virtual.domain"). To change the vacation message back to the default type "reset". </p> <p> You can also fill out the "Enable vacation on" and "Disable vacation on" fields in order to automatically enable and disable sending of the vacation message for this user account on the given dates. </p> <p> The format used is YYYYMMDD (four digit year, two digit month, two digit day) and the dates in the two fields must not be the same. If you want to use this functionality, leave the "Enable vacation messages" setting at "No" - it will be automatically activated based on the date given. </p> </p> ]]></trans>
+    </entry>
+    <entry>
+      <base>VACATION_FROM</base>
+      <trans>Enable vacation on (YYYYMMDD)</trans>
+    </entry>
+    <entry>
+      <base>VACATION_TO</base>
+      <trans>Disable vacation on (YYYYMMDD)</trans>
     </entry>
     <entry>
       <base>MESSAGE</base>
--- smeserver-vacation-1.1/root/etc/e-smith/locale/pt/etc/e-smith/web/functions/uservacations   2013-11-13 11:39:48.000000000 +0100
+++ smeserver-vacation-1.1.update/root/etc/e-smith/locale/pt/etc/e-smith/web/functions/uservacations    2015-09-12 02:39:35.968857604 +0200
@@ -21,7 +21,15 @@
     </entry>
     <entry>
       <base>MODIFY_DESCRIPTION</base>
-      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain. To change the vacation message back to the default type "reset". </p> ]]></trans>
+      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain by replacing the domain part of the sender address in the first line of the message with the virtual domain name (eg. replace the default "From: user@primary.domain" with "From: user@virtual.domain"). To change the vacation message back to the default type "reset". </p> <p> You can also fill out the "Enable vacation on" and "Disable vacation on" fields in order to automatically enable and disable sending of the vacation message for this user account on the given dates. </p> <p> The format used is YYYYMMDD (four digit year, two digit month, two digit day) and the dates in the two fields must not be the same. If you want to use this functionality, leave the "Enable vacation messages" setting at "No" - it will be automatically activated based on the date given. </p> </p> ]]></trans>
+    </entry>
+    <entry>
+      <base>VACATION_FROM</base>
+      <trans>Habilitar mensagens de férias</trans>
+    </entry>
+    <entry>
+      <base>VACATION_TO</base>
+      <trans>Disable vacation on (YYYYMMDD)</trans>
     </entry>
     <entry>
       <base>MESSAGE</base>
--- smeserver-vacation-1.1/root/etc/e-smith/locale/pt-br/etc/e-smith/web/functions/uservacations        2013-11-13 11:39:48.000000000 +0100
+++ smeserver-vacation-1.1.update/root/etc/e-smith/locale/pt-br/etc/e-smith/web/functions/uservacations 2015-09-12 02:39:36.060857609 +0200
@@ -21,7 +21,15 @@
     </entry>
     <entry>
       <base>MODIFY_DESCRIPTION</base>
-      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain. To change the vacation message back to the default type "reset". </p> ]]></trans>
+      <trans><![CDATA[ <p> Entre uma mensagem de férias aqui. Você pode usar "$SUBJECT" em qualquer lugar do texto para ser substituído pela linha de assunto do e-mail que ativou esta auto-resposta.</p> <p> Esta mensagem deve ser composta de duas partes separadas por uma linha em branco. A primeira parte será integrada nos cabeçalhos do e-mail de respostas, assim você deve assegurar-se de que deixará ao menos uma linha em branco antes de escrever sua mensagem.</p> <p> O domínio primário é adicionado ao endereço de e-mail automaticamente, ou você pode inserir um domínio virtual. Para voltar a mensagem de férias de volta à padrão, escreva "reset". </p> ]]></trans>
+    </entry>
+    <entry>
+      <base>VACATION_FROM</base>
+      <trans>Habilitar mensagens de férias</trans>
+    </entry>
+    <entry>
+      <base>VACATION_TO</base>
+      <trans>Disable vacation on (YYYYMMDD)</trans>
     </entry>
     <entry>
       <base>MESSAGE</base>
@@ -40,6 +48,6 @@
     and don't translate $SUBJECT -->
     <entry>
       <base>AWAY_FROM_MAIL</base>
-      <trans><![CDATA[ Subject: Re: $SUBJECT - Away from my email <p> I will not be reading my mail for a while. Your mail regarding </p><p> $SUBJECT </p><p> will be read when I return. </p> ]]></trans>
+      <trans><![CDATA[ Subject: Re: $SUBJECT - Não lendo e-mail<p> Não estou lendo meu e-mail por um período. Seu e-mail com o assunto</p><p> $SUBJECT </p><p> será lido quando eu retornar. </p> ]]></trans>
     </entry>
 </lexicon>
--- smeserver-vacation-1.1/root/etc/e-smith/locale/ro/etc/e-smith/web/functions/uservacations   2013-11-13 11:39:48.000000000 +0100
+++ smeserver-vacation-1.1.update/root/etc/e-smith/locale/ro/etc/e-smith/web/functions/uservacations    2015-09-12 02:39:36.144857614 +0200
@@ -21,7 +21,15 @@
     </entry>
     <entry>
       <base>MODIFY_DESCRIPTION</base>
-      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain. To change the vacation message back to the default type "reset". </p> ]]></trans>
+      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain by replacing the domain part of the sender address in the first line of the message with the virtual domain name (eg. replace the default "From: user@primary.domain" with "From: user@virtual.domain"). To change the vacation message back to the default type "reset". </p> <p> You can also fill out the "Enable vacation on" and "Disable vacation on" fields in order to automatically enable and disable sending of the vacation message for this user account on the given dates. </p> <p> The format used is YYYYMMDD (four digit year, two digit month, two digit day) and the dates in the two fields must not be the same. If you want to use this functionality, leave the "Enable vacation messages" setting at "No" - it will be automatically activated based on the date given. </p> </p> ]]></trans>
+    </entry>
+    <entry>
+      <base>VACATION_FROM</base>
+      <trans>Enable vacation on (YYYYMMDD)</trans>
+    </entry>
+    <entry>
+      <base>VACATION_TO</base>
+      <trans>Disable vacation on (YYYYMMDD)</trans>
     </entry>
     <entry>
       <base>MESSAGE</base>
--- smeserver-vacation-1.1/root/etc/e-smith/locale/ru/etc/e-smith/web/functions/uservacations   2013-11-13 11:39:48.000000000 +0100
+++ smeserver-vacation-1.1.update/root/etc/e-smith/locale/ru/etc/e-smith/web/functions/uservacations    2015-09-12 02:39:36.233857619 +0200
@@ -21,7 +21,15 @@
     </entry>
     <entry>
       <base>MODIFY_DESCRIPTION</base>
-      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain. To change the vacation message back to the default type "reset". </p> ]]></trans>
+      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain by replacing the domain part of the sender address in the first line of the message with the virtual domain name (eg. replace the default "From: user@primary.domain" with "From: user@virtual.domain"). To change the vacation message back to the default type "reset". </p> <p> You can also fill out the "Enable vacation on" and "Disable vacation on" fields in order to automatically enable and disable sending of the vacation message for this user account on the given dates. </p> <p> The format used is YYYYMMDD (four digit year, two digit month, two digit day) and the dates in the two fields must not be the same. If you want to use this functionality, leave the "Enable vacation messages" setting at "No" - it will be automatically activated based on the date given. </p> </p> ]]></trans>
+    </entry>
+    <entry>
+      <base>VACATION_FROM</base>
+      <trans>Enable vacation on (YYYYMMDD)</trans>
+    </entry>
+    <entry>
+      <base>VACATION_TO</base>
+      <trans>Disable vacation on (YYYYMMDD)</trans>
     </entry>
     <entry>
       <base>MESSAGE</base>
--- smeserver-vacation-1.1/root/etc/e-smith/locale/sl/etc/e-smith/web/functions/uservacations   2013-11-13 11:39:48.000000000 +0100
+++ smeserver-vacation-1.1.update/root/etc/e-smith/locale/sl/etc/e-smith/web/functions/uservacations    2015-09-12 02:39:36.370857626 +0200
@@ -21,7 +21,15 @@
     </entry>
     <entry>
       <base>MODIFY_DESCRIPTION</base>
-      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain. To change the vacation message back to the default type "reset". </p> ]]></trans>
+      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain by replacing the domain part of the sender address in the first line of the message with the virtual domain name (eg. replace the default "From: user@primary.domain" with "From: user@virtual.domain"). To change the vacation message back to the default type "reset". </p> <p> You can also fill out the "Enable vacation on" and "Disable vacation on" fields in order to automatically enable and disable sending of the vacation message for this user account on the given dates. </p> <p> The format used is YYYYMMDD (four digit year, two digit month, two digit day) and the dates in the two fields must not be the same. If you want to use this functionality, leave the "Enable vacation messages" setting at "No" - it will be automatically activated based on the date given. </p> </p> ]]></trans>
+    </entry>
+    <entry>
+      <base>VACATION_FROM</base>
+      <trans>Enable vacation on (YYYYMMDD)</trans>
+    </entry>
+    <entry>
+      <base>VACATION_TO</base>
+      <trans>Disable vacation on (YYYYMMDD)</trans>
     </entry>
     <entry>
       <base>MESSAGE</base>
--- smeserver-vacation-1.1/root/etc/e-smith/locale/sv/etc/e-smith/web/functions/uservacations   2013-11-13 11:39:48.000000000 +0100
+++ smeserver-vacation-1.1.update/root/etc/e-smith/locale/sv/etc/e-smith/web/functions/uservacations    2015-09-12 02:39:36.454857631 +0200
@@ -21,7 +21,15 @@
     </entry>
     <entry>
       <base>MODIFY_DESCRIPTION</base>
-      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain. To change the vacation message back to the default type "reset". </p> ]]></trans>
+      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain by replacing the domain part of the sender address in the first line of the message with the virtual domain name (eg. replace the default "From: user@primary.domain" with "From: user@virtual.domain"). To change the vacation message back to the default type "reset". </p> <p> You can also fill out the "Enable vacation on" and "Disable vacation on" fields in order to automatically enable and disable sending of the vacation message for this user account on the given dates. </p> <p> The format used is YYYYMMDD (four digit year, two digit month, two digit day) and the dates in the two fields must not be the same. If you want to use this functionality, leave the "Enable vacation messages" setting at "No" - it will be automatically activated based on the date given. </p> </p> ]]></trans>
+    </entry>
+    <entry>
+      <base>VACATION_FROM</base>
+      <trans>Aktivera frånvaromeddelanden</trans>
+    </entry>
+    <entry>
+      <base>VACATION_TO</base>
+      <trans>Disable vacation on (YYYYMMDD)</trans>
     </entry>
     <entry>
       <base>MESSAGE</base>
--- smeserver-vacation-1.1/root/etc/e-smith/locale/th/etc/e-smith/web/functions/uservacations   2013-11-13 11:39:48.000000000 +0100
+++ smeserver-vacation-1.1.update/root/etc/e-smith/locale/th/etc/e-smith/web/functions/uservacations    2015-09-12 02:39:36.528857635 +0200
@@ -21,7 +21,15 @@
     </entry>
     <entry>
       <base>MODIFY_DESCRIPTION</base>
-      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain. To change the vacation message back to the default type "reset". </p> ]]></trans>
+      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain by replacing the domain part of the sender address in the first line of the message with the virtual domain name (eg. replace the default "From: user@primary.domain" with "From: user@virtual.domain"). To change the vacation message back to the default type "reset". </p> <p> You can also fill out the "Enable vacation on" and "Disable vacation on" fields in order to automatically enable and disable sending of the vacation message for this user account on the given dates. </p> <p> The format used is YYYYMMDD (four digit year, two digit month, two digit day) and the dates in the two fields must not be the same. If you want to use this functionality, leave the "Enable vacation messages" setting at "No" - it will be automatically activated based on the date given. </p> </p> ]]></trans>
+    </entry>
+    <entry>
+      <base>VACATION_FROM</base>
+      <trans>Enable vacation on (YYYYMMDD)</trans>
+    </entry>
+    <entry>
+      <base>VACATION_TO</base>
+      <trans>Disable vacation on (YYYYMMDD)</trans>
     </entry>
     <entry>
       <base>MESSAGE</base>
--- smeserver-vacation-1.1/root/etc/e-smith/locale/tr/etc/e-smith/web/functions/uservacations   2013-11-13 11:39:48.000000000 +0100
+++ smeserver-vacation-1.1.update/root/etc/e-smith/locale/tr/etc/e-smith/web/functions/uservacations    2015-09-12 02:39:36.610857639 +0200
@@ -21,7 +21,15 @@
     </entry>
     <entry>
       <base>MODIFY_DESCRIPTION</base>
-      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain. To change the vacation message back to the default type "reset". </p> ]]></trans>
+      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain by replacing the domain part of the sender address in the first line of the message with the virtual domain name (eg. replace the default "From: user@primary.domain" with "From: user@virtual.domain"). To change the vacation message back to the default type "reset". </p> <p> You can also fill out the "Enable vacation on" and "Disable vacation on" fields in order to automatically enable and disable sending of the vacation message for this user account on the given dates. </p> <p> The format used is YYYYMMDD (four digit year, two digit month, two digit day) and the dates in the two fields must not be the same. If you want to use this functionality, leave the "Enable vacation messages" setting at "No" - it will be automatically activated based on the date given. </p> </p> ]]></trans>
+    </entry>
+    <entry>
+      <base>VACATION_FROM</base>
+      <trans>Tatil modu mesajlarını etkinleştir</trans>
+    </entry>
+    <entry>
+      <base>VACATION_TO</base>
+      <trans>Disable vacation on (YYYYMMDD)</trans>
     </entry>
     <entry>
       <base>MESSAGE</base>
--- smeserver-vacation-1.1/root/etc/e-smith/locale/zh-cn/etc/e-smith/web/functions/uservacations        2013-11-13 11:39:48.000000000 +0100
+++ smeserver-vacation-1.1.update/root/etc/e-smith/locale/zh-cn/etc/e-smith/web/functions/uservacations 2015-09-12 02:39:36.686857643 +0200
@@ -21,7 +21,15 @@
     </entry>
     <entry>
       <base>MODIFY_DESCRIPTION</base>
-      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain. To change the vacation message back to the default type "reset". </p> ]]></trans>
+      <trans><![CDATA[ <p> Enter a vacation message here. You can use "$SUBJECT" anywhere in the text to be replaced with the subject line from the email that activated the auto-reply. </p> <p> This message must be composed of two parts separated by a blank line. The first will be integrated into the headings of the email reply, you must thus ensure you leave at least a blank line before typing your message. </p> <p> The primary domain is added to the address automatically, or you can insert a virtual domain by replacing the domain part of the sender address in the first line of the message with the virtual domain name (eg. replace the default "From: user@primary.domain" with "From: user@virtual.domain"). To change the vacation message back to the default type "reset". </p> <p> You can also fill out the "Enable vacation on" and "Disable vacation on" fields in order to automatically enable and disable sending of the vacation message for this user account on the given dates. </p> <p> The format used is YYYYMMDD (four digit year, two digit month, two digit day) and the dates in the two fields must not be the same. If you want to use this functionality, leave the "Enable vacation messages" setting at "No" - it will be automatically activated based on the date given. </p> </p> ]]></trans>
+    </entry>
+    <entry>
+      <base>VACATION_FROM</base>
+      <trans>启用假期留言</trans>
+    </entry>
+    <entry>
+      <base>VACATION_TO</base>
+      <trans>Disable vacation on (YYYYMMDD)</trans>
     </entry>
     <entry>
       <base>MESSAGE</base>
@@ -33,7 +41,7 @@
     </entry>
     <entry>
       <base>FROM</base>
-      <trans>From:</trans>
+      <trans>来自：</trans>
     </entry>
     <!-- this is read into a ~/.vacation.msg verbatim
     leave a blank line after the subject line but not before, 
--- smeserver-vacation-1.1/root/etc/e-smith/locale/zh-tw/etc/e-smith/web/functions/uservacations        2013-11-13 11:39:48.000000000 +0100
+++ smeserver-vacation-1.1.update/root/etc/e-smith/locale/zh-tw/etc/e-smith/web/functions/uservacations 2015-09-12 02:39:36.763857648 +0200
@@ -24,6 +24,14 @@
       <trans><![CDATA[ <p>請於此處輸入假期訊息。您可於文字中任意使用 "$SUBJECT" 以便取代主動回覆郵件中的主旨欄。 </p> <p> 此訊息由兩部分空白行組成。前面的部分將被整合到，您必須確認輸入訊息之前至少留一空白行。</p> <p>主域名將主動加入位址，或者您亦可手動輸入虛擬網域。改變假期訊息回到預設值請按"reset"。</p> ]]></trans>
     </entry>
     <entry>
+      <base>VACATION_FROM</base>
+      <trans>允許假期留言</trans>
+    </entry>
+    <entry>
+      <base>VACATION_TO</base>
+      <trans>Disable vacation on (YYYYMMDD)</trans>
+    </entry>
+    <entry>
       <base>MESSAGE</base>
       <trans>假期留言</trans>
     </entry>