smeserver-zabbix-agent/contribs7/smeserver-zabbix-agent-0.1-userparam_diskio.patch

--- smeserver-zabbix-agent-0.1/root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/90UserParameters_diskIO.userparam_diskio        2010-08-04 16:16:13.000000000 +0200
+++ smeserver-zabbix-agent-0.1/root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/90UserParameters_diskIO 2010-08-04 16:17:34.000000000 +0200
@@ -0,0 +1,42 @@
+# Disk I/O Monitoring
+
+# Description: Read operations on hdX
+# X can be from 1 to 8
+# you'll have to create a custom template if
+# you want to support more than 8 drives
+# You can also monitor raid devices (/dev/md1 for example)
+
+# Type: Agent or Agent (active)
+# Key: vfs.dev.read.hdX vfs.dev.write.hdX
+# Type of information: Numeric (Float or integer 64bit)
+# Units: bytes/sec
+# Use multiplier: 512
+# Update interval: 60 (for example)
+# Store Value: Delta (speed/sec)
+# Show Value: As is
+
+# For these UserParameter to work, you need to configure the drives you want to monitor
+# in the DB:
+# db configuration setprop zabbix-agent HardDrives /dev/sda,/dev/sdb,/dev/sdc,/dev/sdd
+# signal-event zabbix-agent-update
+
+{
+
+my @hd = split( /[,;]/,( ${'zabbix-agent'}{'HardDrives'} || '' ));
+
+my $cnt = 1;
+foreach my $drive (@hd){
+    if ( -e $drive){
+        $drive =~ s|/dev/||;
+        $OUT .= "Alias=vfs.dev.read.hd" . $cnt . ":vfs.dev.read[$drive,sectors]\n";
+        $OUT .= "Alias=vfs.dev.write.hd" . $cnt . ":vfs.dev.write[$drive,sectors]\n";
+        $cnt++;
+    }
+}
+for (;$cnt < 9; $cnt++){
+        $OUT .= "UserParameter=vfs.dev.read.hd" . $cnt . ",echo '0'\n";
+        $OUT .= "UserParameter=vfs.dev.write.hd" . $cnt . ",echo '0'\n";
+}
+
+}
+
1	vip-ire	1.1	--- smeserver-zabbix-agent-0.1/root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/90UserParameters_diskIO.userparam_diskio 2010-08-04 16:16:13.000000000 +0200
2			+++ smeserver-zabbix-agent-0.1/root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/90UserParameters_diskIO 2010-08-04 16:17:34.000000000 +0200
3			@@ -0,0 +1,42 @@
4			+# Disk I/O Monitoring
5			+
6			+# Description: Read operations on hdX
7			+# X can be from 1 to 8
8			+# you'll have to create a custom template if
9			+# you want to support more than 8 drives
10			+# You can also monitor raid devices (/dev/md1 for example)
11			+
12			+# Type: Agent or Agent (active)
13			+# Key: vfs.dev.read.hdX vfs.dev.write.hdX
14			+# Type of information: Numeric (Float or integer 64bit)
15			+# Units: bytes/sec
16			+# Use multiplier: 512
17			+# Update interval: 60 (for example)
18			+# Store Value: Delta (speed/sec)
19			+# Show Value: As is
20			+
21			+# For these UserParameter to work, you need to configure the drives you want to monitor
22			+# in the DB:
23			+# db configuration setprop zabbix-agent HardDrives /dev/sda,/dev/sdb,/dev/sdc,/dev/sdd
24			+# signal-event zabbix-agent-update
25			+
26			+{
27			+
28			+my @hd = split( /[,;]/,( ${'zabbix-agent'}{'HardDrives'} \|\| '' ));
29			+
30			+my $cnt = 1;
31			+foreach my $drive (@hd){
32			+ if ( -e $drive){
33			+ $drive =~ s\|/dev/\|\|;
34			+ $OUT .= "Alias=vfs.dev.read.hd" . $cnt . ":vfs.dev.read[$drive,sectors]\n";
35			+ $OUT .= "Alias=vfs.dev.write.hd" . $cnt . ":vfs.dev.write[$drive,sectors]\n";
36			+ $cnt++;
37			+ }
38			+}
39			+for (;$cnt < 9; $cnt++){
40			+ $OUT .= "UserParameter=vfs.dev.read.hd" . $cnt . ",echo '0'\n";
41			+ $OUT .= "UserParameter=vfs.dev.write.hd" . $cnt . ",echo '0'\n";
42			+}
43			+
44			+}
45			+