| 1 |
--- smeserver-zabbix-agent-0.1/root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/90UserParameters_ups.userparam_comment 2009-03-24 22:39:23.000000000 +0100 |
| 2 |
+++ smeserver-zabbix-agent-0.1/root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/90UserParameters_ups 2009-03-24 23:23:40.000000000 +0100 |
| 3 |
@@ -1,6 +1,33 @@ |
| 4 |
# Monitor UPS status |
| 5 |
+ |
| 6 |
+# Description: Nut UPS load |
| 7 |
+# Type: Agent or Agent (active) |
| 8 |
+# Key: ups.load |
| 9 |
+# Type of information: Numeric (float) |
| 10 |
+# Units: % |
| 11 |
+# Multiplier: Do not use |
| 12 |
+# Store Value: As is |
| 13 |
UserParameter=ups.load,upsc UPS@localhost ups.load |
| 14 |
+ |
| 15 |
+# Description: Nut UPS Battery Charge |
| 16 |
+# Type: Agent or Agent (active) |
| 17 |
+# Key: ups.battery.charge |
| 18 |
+# Type of information: Numeric (float) |
| 19 |
+# Units: % |
| 20 |
+# Multiplier: Do not use |
| 21 |
+# Store Value: As is |
| 22 |
UserParameter=ups.battery.charge,upsc UPS@localhost battery.charge |
| 23 |
+ |
| 24 |
+# Description: Nut UPS Status |
| 25 |
+# Type: Agent or Agent (active) |
| 26 |
+# Key: ups.status |
| 27 |
+# Type of information: Character |
| 28 |
+# Show Value: As is (you can also define a dictionnary OL=>On Line etc...) |
| 29 |
UserParameter=ups.status,upsc UPS@localhost ups.status |
| 30 |
+ |
| 31 |
+# Description: Nut UPS Model |
| 32 |
+# Type: Agent or Agent (active) |
| 33 |
+# Key: ups.model |
| 34 |
+# Type of information: Text |
| 35 |
UserParameter=ups.model,upsc UPS@localhost ups.model |
| 36 |
|
| 37 |
--- smeserver-zabbix-agent-0.1/root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/90UserParameters_swap.userparam_comment 2009-03-24 22:39:23.000000000 +0100 |
| 38 |
+++ smeserver-zabbix-agent-0.1/root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/90UserParameters_swap 2009-03-24 23:15:32.000000000 +0100 |
| 39 |
@@ -1,3 +1,12 @@ |
| 40 |
# Amount of used swap in bytes |
| 41 |
+ |
| 42 |
+# Description: Used swap space |
| 43 |
+# Type: Agent or Agent (active) |
| 44 |
+# Key: system.swap.size.used |
| 45 |
+# Type of information: Numeric (integer 64bit) |
| 46 |
+# Units: B |
| 47 |
+# Multiplier: do not use |
| 48 |
+# Store Value: As is |
| 49 |
+# Show Value: As is |
| 50 |
UserParameter=system.swap.size.used,free -b | grep Swap | awk '\{print $3\}' |
| 51 |
|
| 52 |
--- smeserver-zabbix-agent-0.1/root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/90UserParameters_mailIn.userparam_comment 2009-03-24 22:39:23.000000000 +0100 |
| 53 |
+++ smeserver-zabbix-agent-0.1/root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/90UserParameters_mailIn 2009-03-24 22:52:11.000000000 +0100 |
| 54 |
@@ -1,5 +1,20 @@ |
| 55 |
# Incomming mails statistics |
| 56 |
|
| 57 |
+# Description: Incoming Mail <key> |
| 58 |
+# Type: Agent or Agent (active) |
| 59 |
+# Key: mail.in.<key> (for example mail.in.denied.dnsbl) |
| 60 |
+# Type of information: Numeric (integer 64bit) |
| 61 |
+# Units: mails/h |
| 62 |
+# Use multiplier: Custom multiplier |
| 63 |
+# Custom multiplier: 6 |
| 64 |
+# Update interval: 600 |
| 65 |
+# Store Value: As is |
| 66 |
+# Show Value: As is |
| 67 |
+ |
| 68 |
+# Choosing 6 as custom muliplier and 600 as interval allow you to get stats in mails/h |
| 69 |
+# In fact, each key retrieve the number of emails since the last run. If you retrieve each value every 600 sec |
| 70 |
+# (10 Min), you'll have stats in mails/10min. If you multiply this by 6 (6x10min), you'll get it in mails/h |
| 71 |
+ |
| 72 |
UserParameter=mail.in.denied.dnsbl,/var/lib/zabbix/bin/mail_in.sh dnsbl |
| 73 |
UserParameter=mail.in.denied.rhsbl,/var/lib/zabbix/bin/mail_in.sh rhsbl |
| 74 |
UserParameter=mail.in.denied.clamav,/var/lib/zabbix/bin/mail_in.sh clamav |
| 75 |
--- smeserver-zabbix-agent-0.1/root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/90UserParameters_memory.userparam_comment 2009-03-24 22:39:23.000000000 +0100 |
| 76 |
+++ smeserver-zabbix-agent-0.1/root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/90UserParameters_memory 2009-03-24 23:06:14.000000000 +0100 |
| 77 |
@@ -1,6 +1,24 @@ |
| 78 |
# Amount of used memory (the agent lacks this stats) |
| 79 |
+ |
| 80 |
+# Description: Used Memory |
| 81 |
+# Type: Agent or Agent (active) |
| 82 |
+# Key: vm.memory.size.used |
| 83 |
+# Type of information: Numeric (integer 64bit) |
| 84 |
+# Units: B |
| 85 |
+# Use multiplier: do not use |
| 86 |
+# Store Value: As is |
| 87 |
+# Show Value: As is |
| 88 |
UserParameter=vm.memory.size.used,free -b | grep 'buffers/cache' | awk '\{print $3\}' |
| 89 |
|
| 90 |
# Amount of used memory in % (the agent lacks this stats) |
| 91 |
+ |
| 92 |
+# Description: Used Memory in % |
| 93 |
+# Type: Agent or Agent (active) |
| 94 |
+# Key: vm.memory.size.pused |
| 95 |
+# Type of information: Numeric (integer 64bit) |
| 96 |
+# Units: % |
| 97 |
+# Use multiplier: do not use |
| 98 |
+# Store Value: As is |
| 99 |
+# Show Value: As is |
| 100 |
UserParameter=vm.memory.size.pused,echo $(($(free -b | grep 'buffers/cache' | awk '\{print $3\}')*100/$(free -b | grep 'Mem' | awk '\{print $2\}'))) |
| 101 |
|
| 102 |
--- smeserver-zabbix-agent-0.1/root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/90UserParameters_netStats.userparam_comment 2009-03-24 22:39:23.000000000 +0100 |
| 103 |
+++ smeserver-zabbix-agent-0.1/root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/90UserParameters_netStats 2009-03-24 23:13:24.000000000 +0100 |
| 104 |
@@ -16,14 +16,44 @@ |
| 105 |
|
| 106 |
$OUT .=<<"HERE"; |
| 107 |
|
| 108 |
+# Description: In Internal |
| 109 |
+# Type: Agent or Agent (active) |
| 110 |
+# Key: net.if.in.internal |
| 111 |
+# Type of information: Numeric (float) |
| 112 |
+# Units: b/s |
| 113 |
+# Custom multiplier: 8 (if you want the value in bits/s instead of Bytes/s) |
| 114 |
+# Store Value: Delta (speed per second) |
| 115 |
UserParameter=net.if.in.internal,cat /proc/net/dev | grep $internal | cut -d":" -f2 | awk '{print \$1}' |
| 116 |
+ |
| 117 |
+# Description: Out Internal |
| 118 |
+# Type: Agent or Agent (active) |
| 119 |
+# Key: net.if.out.internal |
| 120 |
+# Type of information: Numeric (float) |
| 121 |
+# Units: b/s |
| 122 |
+# Custom multiplier: 8 (if you want the value in bits/s instead of Bytes/s) |
| 123 |
+# Store Value: Delta (speed per second) |
| 124 |
UserParameter=net.if.out.internal,cat /proc/net/dev | grep $internal | cut -d":" -f2 | awk '{print \$9}' |
| 125 |
|
| 126 |
HERE |
| 127 |
|
| 128 |
if (($SystemMode || 'serveronly') ne 'serveronly'){ |
| 129 |
$OUT .=<<"HERE"; |
| 130 |
+# Description: In External |
| 131 |
+# Type: Agent or Agent (active) |
| 132 |
+# Key: net.if.in.external |
| 133 |
+# Type of information: Numeric (float) |
| 134 |
+# Units: b/s |
| 135 |
+# Custom multiplier: 8 (if you want the value in bits/s instead of Bytes/s) |
| 136 |
+# Store Value: Delta (speed per second) |
| 137 |
UserParameter=net.if.in.external,cat /proc/net/dev | grep $external | cut -d":" -f2 | awk '{print \$1}' |
| 138 |
+ |
| 139 |
+# Description: Out External |
| 140 |
+# Type: Agent or Agent (active) |
| 141 |
+# Key: net.if.out.external |
| 142 |
+# Type of information: Numeric (float) |
| 143 |
+# Units: b/s |
| 144 |
+# Custom multiplier: 8 (if you want the value in bits/s instead of Bytes/s) |
| 145 |
+# Store Value: Delta (speed per second) |
| 146 |
UserParameter=net.if.out.external,cat /proc/net/dev | grep $external | cut -d":" -f2 | awk '{print \$9}' |
| 147 |
|
| 148 |
HERE |
| 149 |
--- smeserver-zabbix-agent-0.1/root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/90UserParameters_mysql.userparam_comment 2009-03-24 22:39:23.000000000 +0100 |
| 150 |
+++ smeserver-zabbix-agent-0.1/root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/90UserParameters_mysql 2009-03-24 23:08:58.000000000 +0100 |
| 151 |
@@ -1,10 +1,16 @@ |
| 152 |
|
| 153 |
# Some stats about MySQL |
| 154 |
+ |
| 155 |
+# Description: MySQL <key> |
| 156 |
+# Type: Agent or Agent (active) |
| 157 |
+# Type of information: Numeric (float) |
| 158 |
+# Unit: <depend on the key> (for example, qps) |
| 159 |
+# Use multiplier: do not use |
| 160 |
+# Store Value: As is |
| 161 |
UserParameter=mysql.uptime,/var/lib/zabbix/bin/mysqladmin_status | cut -d" " -f2 |
| 162 |
UserParameter=mysql.threads,/var/lib/zabbix/bin/mysqladmin_status | cut -d" " -f5 |
| 163 |
UserParameter=mysql.questions,/var/lib/zabbix/bin/mysqladmin_status | cut -d" " -f8 |
| 164 |
UserParameter=mysql.slowqueries,/var/lib/zabbix/bin/mysqladmin_status | cut -d" " -f12 |
| 165 |
UserParameter=mysql.qps,/var/lib/zabbix/bin/mysqladmin_status | cut -d" " -f29 |
| 166 |
-UserParameter=mysql.qps,/var/lib/zabbix/bin/mysqladmin_status | cut -d" " -f29 |
| 167 |
UserParameter=mysql.size,/usr/bin/sudo -u mysql /usr/bin/du -s /var/lib/mysql | awk '\{print $1\}' |
| 168 |
|
| 169 |
--- smeserver-zabbix-agent-0.1/root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/90UserParameters_extIP.userparam_comment 2009-03-24 22:39:22.000000000 +0100 |
| 170 |
+++ smeserver-zabbix-agent-0.1/root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/90UserParameters_extIP 2009-03-24 22:44:35.000000000 +0100 |
| 171 |
@@ -1,4 +1,9 @@ |
| 172 |
|
| 173 |
-# Retrieve rela external IP |
| 174 |
+# Retrieve real external IP |
| 175 |
+# Description: Ext IP |
| 176 |
+# Type: Agent or Agent (active) |
| 177 |
+# Key: ip.external |
| 178 |
+# Type of information: Character |
| 179 |
+# Show Value: As is |
| 180 |
UserParameter=ip.external,/usr/bin/curl --connect-timeout 5 -s -o - -k "http://www.wimip.fr/?t=" |
| 181 |
|
| 182 |
--- smeserver-zabbix-agent-0.1/root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/90UserParameters_swRaid.userparam_comment 2009-03-24 22:39:23.000000000 +0100 |
| 183 |
+++ smeserver-zabbix-agent-0.1/root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/90UserParameters_swRaid 2009-03-24 23:19:24.000000000 +0100 |
| 184 |
@@ -1,6 +1,18 @@ |
| 185 |
|
| 186 |
# Report status of every Raid Array (parsing /proc/mdtstat) |
| 187 |
-# Just add a key named raid.sw.status, type caracter. Then A new trigger with an expression like that: |
| 188 |
-# \{hostname:raid.sw.status.str(CRITICAL)\}=1 |
| 189 |
+ |
| 190 |
+# Description: Software Raid Status |
| 191 |
+# Type: Agent or Agent (active) |
| 192 |
+# Key: raid.sw.status |
| 193 |
+# Type of Information: Character |
| 194 |
+# Show Value: As is |
| 195 |
+ |
| 196 |
+# The value reported is like: |
| 197 |
+# OK - md3 [UU] has 2 of 2 devices active (active=sdc1,sdd1 failed=none spare=none) |
| 198 |
+# CRITICAL - md2 [_U] has 1 of 2 devices active (active=sdb2 failed=sda2 spare=none) |
| 199 |
+# OK - md1 [UU] has 2 of 2 devices active (active=sda1,sdb1 failed=none spare=none) |
| 200 |
+ |
| 201 |
+# Tips: You can add a simple trigger on this check like: |
| 202 |
+# \{ hostname:raid.sw.status.str( CRITICAL ) \}=1 |
| 203 |
UserParameter=raid.sw.status,/var/lib/zabbix/bin/mdstat-parser.pl |
| 204 |
|
| 205 |
--- smeserver-zabbix-agent-0.1/root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/90UserParameters_mailOut.userparam_comment 2009-03-24 22:39:23.000000000 +0100 |
| 206 |
+++ smeserver-zabbix-agent-0.1/root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/90UserParameters_mailOut 2009-03-24 22:53:18.000000000 +0100 |
| 207 |
@@ -1,5 +1,20 @@ |
| 208 |
# Outgoing mails statistics |
| 209 |
|
| 210 |
+# Description: Incoming Mail <key> |
| 211 |
+# Type: Agent or Agent (active) |
| 212 |
+# Key: mail.out.<key> (for example mail.out.total) |
| 213 |
+# Type of information: Numeric (integer 64bit) |
| 214 |
+# Units: mails/h |
| 215 |
+# Use multiplier: Custom multiplier |
| 216 |
+# Custom multiplier: 6 |
| 217 |
+# Update interval: 600 |
| 218 |
+# Store Value: As is |
| 219 |
+# Show Value: As is |
| 220 |
+ |
| 221 |
+# Choosing 6 as custom muliplier and 600 as interval allow you to get stats in mails/h |
| 222 |
+# In fact, each key retrieve the number of emails since the last run. If you retrieve each value every 600 sec |
| 223 |
+# (10 Min), you'll have stats in mails/10min. If you multiply this by 6 (6x10min), you'll get it in mails/h |
| 224 |
+ |
| 225 |
UserParameter=mail.out.total,/var/lib/zabbix/bin/mail_out.sh total |
| 226 |
UserParameter=mail.out.success,/var/lib/zabbix/bin/mail_out.sh success |
| 227 |
UserParameter=mail.out.deferral,/var/lib/zabbix/bin/mail_out.sh deferral |
Parent Directory
| 
Revision Log
| 
Revision Graph
