| 1 |
--- smeserver-zabbix-agent-0.1/root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/90UserParameters_diskIO.userparam_diskio 2010-08-04 16:16:13.000000000 +0200 |
| 2 |
+++ smeserver-zabbix-agent-0.1/root/etc/e-smith/templates/etc/zabbix/zabbix_agentd.conf/90UserParameters_diskIO 2010-08-04 16:17:34.000000000 +0200 |
| 3 |
@@ -0,0 +1,42 @@ |
| 4 |
+# Disk I/O Monitoring |
| 5 |
+ |
| 6 |
+# Description: Read operations on hdX |
| 7 |
+# X can be from 1 to 8 |
| 8 |
+# you'll have to create a custom template if |
| 9 |
+# you want to support more than 8 drives |
| 10 |
+# You can also monitor raid devices (/dev/md1 for example) |
| 11 |
+ |
| 12 |
+# Type: Agent or Agent (active) |
| 13 |
+# Key: vfs.dev.read.hdX vfs.dev.write.hdX |
| 14 |
+# Type of information: Numeric (Float or integer 64bit) |
| 15 |
+# Units: bytes/sec |
| 16 |
+# Use multiplier: 512 |
| 17 |
+# Update interval: 60 (for example) |
| 18 |
+# Store Value: Delta (speed/sec) |
| 19 |
+# Show Value: As is |
| 20 |
+ |
| 21 |
+# For these UserParameter to work, you need to configure the drives you want to monitor |
| 22 |
+# in the DB: |
| 23 |
+# db configuration setprop zabbix-agent HardDrives /dev/sda,/dev/sdb,/dev/sdc,/dev/sdd |
| 24 |
+# signal-event zabbix-agent-update |
| 25 |
+ |
| 26 |
+{ |
| 27 |
+ |
| 28 |
+my @hd = split( /[,;]/,( ${'zabbix-agent'}{'HardDrives'} || '' )); |
| 29 |
+ |
| 30 |
+my $cnt = 1; |
| 31 |
+foreach my $drive (@hd){ |
| 32 |
+ if ( -e $drive){ |
| 33 |
+ $drive =~ s|/dev/||; |
| 34 |
+ $OUT .= "Alias=vfs.dev.read.hd" . $cnt . ":vfs.dev.read[$drive,sectors]\n"; |
| 35 |
+ $OUT .= "Alias=vfs.dev.write.hd" . $cnt . ":vfs.dev.write[$drive,sectors]\n"; |
| 36 |
+ $cnt++; |
| 37 |
+ } |
| 38 |
+} |
| 39 |
+for (;$cnt < 9; $cnt++){ |
| 40 |
+ $OUT .= "UserParameter=vfs.dev.read.hd" . $cnt . ",echo '0'\n"; |
| 41 |
+ $OUT .= "UserParameter=vfs.dev.write.hd" . $cnt . ",echo '0'\n"; |
| 42 |
+} |
| 43 |
+ |
| 44 |
+} |
| 45 |
+ |
Parent Directory
| 
Revision Log
| 
Revision Graph
