smeserver/cdrom.image/install.cfg

install
text
cdrom
skipx
mouse --device none
network --device eth0 --bootproto dhcp
rootpw --iscrypted $1$iHhL195i$25OY88oyw2bxgU47MvuZf0
firewall --disabled
selinux --disabled
authconfig --enableshadow --enablemd5
bootloader --location=mbr
zerombr yes
%include /tmp/part-include

%packages
@ Base

%post
/sbin/syslogd &
sleep 2
/sbin/e-smith/signal-event post-install

# HACK - fix selinux config
perl -p -i -e 's/SELINUX=enforcing/SELINUX=disabled/' /etc/selinux/config

%pre
#!/bin/sh
set -x

hds=""
raidlevel=2

memsize=`cat /proc/meminfo | grep 'MemTotal:' | sed 's/^.* \([0-9]\+\) kB$/\1/'`
swapsize=$(($memsize/512))

if [ $swapsize -gt 2048 ] ; then
  swapsize=2048
fi

# let's assume it's a SCSI system
hds=`grep 'sd[a-z]$' /proc/partitions | sed 's/.* sd/ sd/'`
set $hds
numhd=`echo $#`
if [ $numhd == "0" ] ; then
  # No SCSI Drives is must be IDE
  for file in /proc/ide/hd*
  do
    media=`cat $file/media`
    if [ $media == "disk" ] ; then
        hds="$hds `basename $file`"
    fi
  done

  set $hds
  numhd=`echo $#`
fi

echo "# Auto configure partitions" > /tmp/part-include

if [ $numhd -gt "0" ] ; then
  hdlist=`echo $hds | sed 's/^ \+//;s/ \+$//;s/  \+/ /g;s/ /,/g'`
  echo "clearpart --all --initlabel --drives=$hdlist" >> /tmp/part-include
  
  num=1
  while [ $num -le $numhd ]; do
    hd=`echo $hds | cut -d' ' -f$num`
    echo "part raid.0_$num --size=100 --ondisk=$hd --asprimary" >> /tmp/part-include
    echo "part raid.1_$num --size=1500 --grow --ondisk=$hd" >> /tmp/part-include
  
    md0="$md0 raid.0_$num"
    md1="$md1 raid.1_$num"
    let num=num+1
  done
  
  if [ $numhd -le "2" ] ; then
    raidlevel=1
  elif [ $numhd -ge "6" ]; then
    raidlevel=6
  else
    raidlevel=5
  fi

  echo "raid /boot --fstype ext3 --level=1 --device=md0 $md0" >> /tmp/part-include
  echo "raid pv.1 --fstype \"physical volume (LVM)\" --level=RAID$raidlevel --device=md1 $md1" >> /tmp/part-include
  echo "volgroup vg_primary --pesize=32768 pv.1" >> /tmp/part-include
  echo "logvol / --fstype ext3 --name=lv_root --vgname=vg_primary --size=1200 --grow" >> /tmp/part-include
  echo "logvol swap --fstype swap --name=lv_swap --vgname=vg_primary --size=256 --grow --maxsize=$swapsize" >> /tmp/part-include
fi
1	install
2	text
3	cdrom
4	skipx
5	mouse --device none
6	network --device eth0 --bootproto dhcp
7	rootpw --iscrypted $1$iHhL195i$25OY88oyw2bxgU47MvuZf0
8	firewall --disabled
9	selinux --disabled
10	authconfig --enableshadow --enablemd5
11	bootloader --location=mbr
12	zerombr yes
13	%include /tmp/part-include
14
15	%packages
16	@ Base
17
18	%post
19	/sbin/syslogd &
20	sleep 2
21	/sbin/e-smith/signal-event post-install
22
23	# HACK - fix selinux config
24	perl -p -i -e 's/SELINUX=enforcing/SELINUX=disabled/' /etc/selinux/config
25
26	%pre
27	#!/bin/sh
28	set -x
29
30	hds=""
31	raidlevel=2
32
33	memsize=`cat /proc/meminfo \| grep 'MemTotal:' \| sed 's/^.* \([0-9]\+\) kB$/\1/'`
34	swapsize=$(($memsize/512))
35
36	if [ $swapsize -gt 2048 ] ; then
37	swapsize=2048
38	fi
39
40	# let's assume it's a SCSI system
41	hds=`grep 'sd[a-z]$' /proc/partitions \| sed 's/.* sd/ sd/'`
42	set $hds
43	numhd=`echo $#`
44	if [ $numhd == "0" ] ; then
45	# No SCSI Drives is must be IDE
46	for file in /proc/ide/hd*
47	do
48	media=`cat $file/media`
49	if [ $media == "disk" ] ; then
50	hds="$hds `basename $file`"
51	fi
52	done
53
54	set $hds
55	numhd=`echo $#`
56	fi
57
58	echo "# Auto configure partitions" > /tmp/part-include
59
60	if [ $numhd -gt "0" ] ; then
61	hdlist=`echo $hds \| sed 's/^ \+//;s/ \+$//;s/ \+/ /g;s/ /,/g'`
62	echo "clearpart --all --initlabel --drives=$hdlist" >> /tmp/part-include
63
64	num=1
65	while [ $num -le $numhd ]; do
66	hd=`echo $hds \| cut -d' ' -f$num`
67	echo "part raid.0_$num --size=100 --ondisk=$hd --asprimary" >> /tmp/part-include
68	echo "part raid.1_$num --size=1500 --grow --ondisk=$hd" >> /tmp/part-include
69
70	md0="$md0 raid.0_$num"
71	md1="$md1 raid.1_$num"
72	let num=num+1
73	done
74
75	if [ $numhd -le "2" ] ; then
76	raidlevel=1
77	elif [ $numhd -ge "6" ]; then
78	raidlevel=6
79	else
80	raidlevel=5
81	fi
82
83	echo "raid /boot --fstype ext3 --level=1 --device=md0 $md0" >> /tmp/part-include
84	echo "raid pv.1 --fstype \"physical volume (LVM)\" --level=RAID$raidlevel --device=md1 $md1" >> /tmp/part-include
85	echo "volgroup vg_primary --pesize=32768 pv.1" >> /tmp/part-include
86	echo "logvol / --fstype ext3 --name=lv_root --vgname=vg_primary --size=1200 --grow" >> /tmp/part-include
87	echo "logvol swap --fstype swap --name=lv_swap --vgname=vg_primary --size=256 --grow --maxsize=$swapsize" >> /tmp/part-include
88	fi