/[smeserver]/cdrom.image/sme10/Packages/base/sme-kickstart.cfg
ViewVC logotype

Annotation of /cdrom.image/sme10/Packages/base/sme-kickstart.cfg

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph


Revision 1.12 - (hide annotations) (download)
Wed Jun 9 04:36:48 2021 UTC (3 years, 4 months ago) by jpp
Branch: MAIN
Changes since 1.11: +2 -2 lines
mirrorlist

1 unnilennium 1.1 # System authorization information
2     auth --enableshadow --passalgo=sha512
3 unnilennium 1.4
4 chrissn 1.5 # We do not want SELinux
5 unnilennium 1.1 selinux --disabled
6 unnilennium 1.4
7 chrissn 1.5 # Services to activate
8 unnilennium 1.3 services --disabled=lm_sensors
9 unnilennium 1.4
10 chrissn 1.5 # Default root pass, will be changed in post-install process anyway
11     rootpw --lock
12 chrissn 1.7 user --name=installer --uid=9999
13 unnilennium 1.1
14 chrissn 1.5 # Accept EULA
15 unnilennium 1.4 eula --agreed
16    
17 chrissn 1.5 # Partitioning from pre section
18 unnilennium 1.3 %include /tmp/part-include
19 unnilennium 1.1
20 chrissn 1.5 # Disable kdump
21 unnilennium 1.4 %addon com_redhat_kdump --disable
22     %end
23    
24    
25 chrissn 1.5 # Add netinstall repos
26 jpp 1.12 repo --name=smeos --mirrorlist https://mirrorlist.koozali.org/mirrorlist/smeos-10-x86_64
27     repo --name=smeupdates --mirrorlist https://mirrorlist.koozali.org/mirrorlist/smeupdates-10-x86_64
28 chrissn 1.5
29     # Packages to install
30     %packages
31     @^minimal
32     @base
33     @core
34     -chrony
35     -kexec-tools
36     %end
37    
38 unnilennium 1.3
39 chrissn 1.5 # Partitioning in pre-install
40 chrissn 1.9 %pre --interpreter=/bin/bash --log=/var/log/sme-partitioning.log
41 chrissn 1.5
42 chrissn 1.9 # Read command line arguments
43     if grep nolvm "/proc/cmdline" ; then NOLVM=true ; fi
44     if grep noraid "/proc/cmdline" ; then NORAID=true ; fi
45 chrissn 1.10 if grep noxfs "/proc/cmdline" ; then FSTYPE="ext4" ; else FSTYPE="xfs" ; fi
46 chrissn 1.9 echo "Command line arguments:"
47     cat /proc/cmdline
48 unnilennium 1.3
49 chrissn 1.9 # Minimum size of hard drive needed specified in MB
50     MINSIZE=5000
51    
52     # Number of detected drives and first disk size
53 unnilennium 1.4 NDEV=0
54 chrissn 1.9 BASESIZE=0
55     SIZEDIFF=0
56 unnilennium 1.3
57 chrissn 1.9 # Loop through block devices, keep those over MINSIZE and ensure additional drives for RAID are within 100MB of the first
58     for DEV in $(lsblk -nl | grep disk | cut -d' ' -f1) ; do
59     if [ -d /sys/block/$DEV ] ; then
60 unnilennium 1.4 REMOVABLE=`cat /sys/block/$DEV/removable`
61 chrissn 1.9 if (( $REMOVABLE == 0 )) ; then
62 unnilennium 1.4 SIZE=`cat /sys/block/$DEV/size`
63 chrissn 1.9 MB=$(($SIZE/2**11))
64     if [ $MB -gt $MINSIZE ] ; then
65     if [ $NDEV == 0 ] ; then
66     echo "First drive found: $DEV with size $MB MB"
67     DRIVES[$NDEV]=$DEV
68     BASESIZE=$MB
69     ((NDEV++))
70     else
71     SIZEDIFF=$(($MB-$BASESIZE))
72     if [ $SIZEDIFF -gt 100 ] || [ $SIZEDIFF -lt -100 ] ; then
73     echo "Drive found but size of $MB MB doesn't match $BASESIZE MB - ignoring"
74     else
75     echo "Additional drive found: $DEV with size $MB MB"
76     DRIVES[$NDEV]=$DEV
77     ((NDEV++))
78     fi
79     fi
80 unnilennium 1.3 fi
81     fi
82     fi
83     done
84 chrissn 1.9 echo "Total disks found: $NDEV"
85    
86     # Calculate recommended swap size for RAID + nolvm case
87     if [ -d /sys/firmware/efi ] ; then
88     DISKSPARE=$(($BASESIZE-200-500-3000))
89     else
90     DISKSPARE=$(($BASESIZE-1-500-3000))
91     fi
92     MEMSIZE=$(awk '/^MemTotal:/{print $2}' /proc/meminfo)
93     MEMSIZEMB=$(($MEMSIZE/2**10))
94    
95     if [ $MEMSIZEMB -lt 2000 ] ; then
96     SWAPSIZE=$((2*$MEMSIZEMB))
97     elif [ $MEMSIZEMB -lt 8000 ] ; then
98     SWAPSIZE=$MEMSIZEMB
99     else
100     SWAPSIZE=8000
101     fi
102     if [ $SWAPSIZE -gt $DISKSPARE ] ; then SWAPSIZE=$DISKSPARE ; fi
103 unnilennium 1.3
104 chrissn 1.5 # Declare useful variables
105     printf -v DRIVELIST ",%s" "${DRIVES[@]}"
106 chrissn 1.9 if [ $NORAID ] ; then
107     DRIVELIST=${DRIVES[0]}
108     else
109     DRIVELIST=${DRIVELIST:1}
110     fi
111    
112     echo "Final drive list: $DRIVELIST"
113 chrissn 1.5 LEVEL=1
114     SPARE=0
115    
116 chrissn 1.9
117 chrissn 1.5 # Error if detection has failed and fall back
118     if [ ${#DRIVES[@]} == 0 ] ; then
119     echo "No drive suitable for installation found! Reverting to Anaconda defaults."
120    
121     cat > /tmp/part-include <<EOF
122     # Clear the Master Boot Record
123     zerombr
124    
125     # Clear current partitions
126     clearpart --all --initlabel
127 unnilennium 1.3
128 chrissn 1.5 # Automatically create partitions using LVM
129     autopart --lvm --nohome
130 unnilennium 1.3 EOF
131    
132 chrissn 1.5 # Otherwise clear detected devices and set up bootloader
133 unnilennium 1.3 else
134 chrissn 1.5 cat > /tmp/part-include <<EOF
135     # Clear the Master Boot Record
136     zerombr
137    
138     # Clear current partitions and install bootloader
139     clearpart --all --drives=$DRIVELIST --initlabel
140     ignoredisk --only-use=$DRIVELIST
141     bootloader --location=mbr --driveorder=$DRIVELIST
142     EOF
143    
144 chrissn 1.9 # If single disk or noraid specific then set up partitioning without RAID
145 chrissn 1.5 # NOTE: From this point we're appending to part-include
146 chrissn 1.9 if [ ${#DRIVES[@]} == 1 ] || [ $NORAID ] ; then
147 chrissn 1.5
148 chrissn 1.9 # Include the EFI or biosboot partition if necessary
149 chrissn 1.5 if [ -d /sys/firmware/efi ] ; then
150     printf "part /boot/efi --fstype=efi --size=200 --ondisk=%s\n" "${DRIVES[0]}" >> /tmp/part-include
151 chrissn 1.9 elif [ $BASESIZE -gt 2048000 ] ; then
152     printf "part biosboot --fstype=biosboot --size=1 --ondisk=%s\n" "${DRIVES[0]}" >> /tmp/part-include
153 chrissn 1.5 fi
154    
155 chrissn 1.9 # Create boot partition
156 chrissn 1.10 printf "part /boot --fstype=%s --size=500 --label=BOOT --ondisk=%s\n" "$FSTYPE" "${DRIVES[0]}" >> /tmp/part-include
157 chrissn 1.9
158     # Default to LVM unless specified at command line
159     if [ $NOLVM ] ; then
160     cat >> /tmp/part-include <<EOF
161 chrissn 1.10 part / --fstype=$FSTYPE --grow --size=3000 --label=ROOT --ondisk=${DRIVES[0]}
162 chrissn 1.9 part swap --fstype=swap --recommended --label=SWAP --ondisk=${DRIVES[0]}
163 chrissn 1.5 EOF
164 chrissn 1.9 else
165     cat >> /tmp/part-include <<EOF
166     part pv.01 --size=4300 --grow --ondisk=${DRIVES[0]}
167     volgroup main pv.01
168 chrissn 1.10 logvol / --fstype=$FSTYPE --name=root --vgname=main --grow --size=3000
169 chrissn 1.9 logvol swap --fstype=swap --name=swap --vgname=main --recommended
170     EOF
171     fi
172 chrissn 1.5
173     # Otherwise multiple disks - prepare for RAID
174     else
175 unnilennium 1.3
176 chrissn 1.9 # Define EFI or biosboot and RAID partitions
177 chrissn 1.5 for i in "${!DRIVES[@]}"; do
178 chrissn 1.9
179 chrissn 1.5 if [ -d /sys/firmware/efi ] ; then
180     printf "part raid.%s0 --size=200 --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
181 chrissn 1.9 elif [ $BASESIZE -gt 2048000 ] ; then
182     printf "part biosboot --fstype=biosboot --size=1 --ondisk=%s\n" "${DRIVES[$i]}" >> /tmp/part-include
183 chrissn 1.5 fi
184     printf "part raid.%s1 --size=500 --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
185 chrissn 1.9
186     # Default to LVM unless specified
187     if [ $NOLVM ] ; then
188     printf "part raid.%s2 --size=3000 --grow --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
189     printf "part raid.%s3 --size=%s --ondisk=%s\n" "$i" "$SWAPSIZE" "${DRIVES[$i]}" >> /tmp/part-include
190     else
191     printf "part raid.%s2 --size=4300 --grow --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
192     fi
193    
194 chrissn 1.5 done
195    
196     # Compute RAID level
197     # from https://wiki.contribs.org/Raid
198     # 2 Drives - Software RAID 1
199     # 3 Drives - Software RAID 1 + 1 Hot-spare
200 chrissn 1.6 # 4 Drives - Software RAID 6
201     # 5+ Drives - Software RAID 6 + 1 Hot-spare
202 chrissn 1.5
203     if [ ${#DRIVES[@]} == 2 ] ; then
204     LEVEL=1
205     SPARE=0
206     elif [ ${#DRIVES[@]} == 3 ] ; then
207     LEVEL=1
208     SPARE=1
209 chrissn 1.6 elif [ ${#DRIVES[@]} == 4 ] ; then
210     LEVEL=6
211     SPARE=0
212 chrissn 1.5 else
213     LEVEL=6
214     SPARE=1
215     fi
216 unnilennium 1.3
217 chrissn 1.5 # Set up RAID devices
218     printf -v EFIDEVS "raid.%s0 " "${!DRIVES[@]}"
219     printf -v BOOTDEVS "raid.%s1 " "${!DRIVES[@]}"
220     printf -v ROOTDEVS "raid.%s2 " "${!DRIVES[@]}"
221 chrissn 1.9 printf -v SWAPDEVS "raid.%s3 " "${!DRIVES[@]}"
222 chrissn 1.5
223     # Include the EFI partition if necessary
224     if [ -d /sys/firmware/efi ] ; then
225 chrissn 1.6 printf "raid /boot/efi --fstype=efi --level=1 --spares=0 --device=md9 %s\n" "$EFIDEVS" >> /tmp/part-include
226 chrissn 1.5 fi
227 unnilennium 1.3
228 chrissn 1.9 # Boot partition
229 chrissn 1.10 printf "raid /boot --fstype=%s --level=1 --spares=0 --device=md0 %s\n" "$FSTYPE" "$BOOTDEVS" >> /tmp/part-include
230 unnilennium 1.3
231 chrissn 1.9 # Default to LVM unless specified
232     if [ $NOLVM ] ; then
233     cat >> /tmp/part-include <<EOF
234 chrissn 1.10 raid / --fstype=$FSTYPE --level=$LEVEL --spares=$SPARE --device=md1 $ROOTDEVS
235 chrissn 1.9 raid swap --fstype=swap --level=$LEVEL --spares=$SPARE --device=md2 $SWAPDEVS
236     EOF
237     else
238     cat >> /tmp/part-include <<EOF
239     raid pv.01 --level=$LEVEL --spares=$SPARE --device=md1 $ROOTDEVS
240     volgroup main pv.01
241 chrissn 1.10 logvol / --fstype=$FSTYPE --name=root --vgname=main --grow --size=3000
242 chrissn 1.9 logvol swap --fstype swap --name=swap --vgname=main --recommended
243 chrissn 1.5 EOF
244 chrissn 1.9 fi
245 chrissn 1.5 fi
246     fi
247 unnilennium 1.1
248 chrissn 1.9 echo "Final part-include output:"
249     cat /tmp/part-include
250    
251 unnilennium 1.1 %end
252    
253    
254 chrissn 1.5 # SME events in post-install
255 unnilennium 1.4 %post --interpreter=/usr/bin/bash --log=/var/log/ks.post02.log
256 chrissn 1.7 userdel -r installer
257     sleep 2
258     /sbin/e-smith/signal-event post-install
259     sleep 2
260     /sbin/e-smith/db configuration set UnsavedChanges no
261 unnilennium 1.1 touch /forcequotacheck
262 chrissn 1.5 %end
263 unnilennium 1.1
264 unnilennium 1.4
265     %post --nochroot --log=/mnt/sysimage/var/log/ks.post01.log
266     #!/bin/bash
267     sysimage="/mnt/sysimage"
268 chrissn 1.9 cp -r /var/log/sme-partitioning.log ${sysimage}/root/
269 unnilennium 1.4 cp -r /tmp/anaconda.log ${sysimage}/root/
270     %end

admin@koozali.org
ViewVC Help
Powered by ViewVC 1.2.1 RSS 2.0 feed