Packages/base/sme-kickstart.cfg

# System authorization information
auth --enableshadow --passalgo=sha512

# We do not want SELinux
selinux --disabled

# Services to activate
services --disabled=lm_sensors

# Default root pass, will be changed in post-install process anyway
rootpw --lock
user --name=installer --uid=9999

# Accept EULA
eula --agreed

# Partitioning from pre section
%include /tmp/part-include

# Disable kdump
%addon com_redhat_kdump --disable
%end


# Add netinstall repos
#this one gives curl 6 errors on netinstall while added manually works from time to time
#url --mirrorlist https://mirrorlist.koozali.org/mirrorlist/smeos-10-x86_64 
#repo --name=smeupdates --mirrorlist https://mirrorlist.koozali.org/mirrorlist/smeupdates-10-x86_64
repo --name=smeos --url http://distro.ibiblio.org/pub/linux/distributions/smeserver/releases/10/smeos/x86_64/
repo --name=smeupdates --url http://distro.ibiblio.org/pub/linux/distributions/smeserver/releases/testing/10/smeupdates/x86_64/

# Packages to install
%packages
@^minimal
@base
@core
-chrony
-kexec-tools
%end


# Partitioning in pre-install
%pre --interpreter=/bin/bash --log=/var/log/sme-partitioning.log

# Read command line arguments
if grep nolvm "/proc/cmdline" ; then NOLVM=true ; fi
if grep noraid "/proc/cmdline" ; then NORAID=true ; fi
if grep noxfs "/proc/cmdline" ; then FSTYPE="ext4" ; else FSTYPE="xfs" ; fi 
echo "Command line arguments:"
cat /proc/cmdline

# Minimum size of hard drive needed specified in MB
MINSIZE=5000

# Number of detected drives and first disk size
NDEV=0
BASESIZE=0
SIZEDIFF=0

# Loop through block devices, keep those over MINSIZE and ensure additional drives for RAID are within 100MB of the first
for DEV in $(lsblk -nl | grep disk | cut -d' ' -f1) ; do
  if [ -d /sys/block/$DEV ] ; then
    REMOVABLE=`cat /sys/block/$DEV/removable`
    if (( $REMOVABLE == 0 )) ; then
      SIZE=`cat /sys/block/$DEV/size`
      MB=$(($SIZE/2**11))
      if [ $MB -gt $MINSIZE ] ; then
        if [ $NDEV == 0 ] ; then
          echo "First drive found: $DEV with size $MB MB"
          DRIVES[$NDEV]=$DEV
          BASESIZE=$MB
          ((NDEV++))
        else
          SIZEDIFF=$(($MB-$BASESIZE))
          if [ $SIZEDIFF -gt 100 ] || [ $SIZEDIFF -lt -100 ] ; then
            echo "Drive found but size of $MB MB doesn't match $BASESIZE MB - ignoring"
          else
            echo "Additional drive found: $DEV with size $MB MB"
            DRIVES[$NDEV]=$DEV
            ((NDEV++))
          fi
        fi
      fi
    fi
  fi
done
echo "Total disks found: $NDEV"

# Calculate recommended swap size for RAID + nolvm case
if [ -d /sys/firmware/efi ] ; then
  DISKSPARE=$(($BASESIZE-200-500-3000))
else
  DISKSPARE=$(($BASESIZE-1-500-3000))
fi
MEMSIZE=$(awk '/^MemTotal:/{print $2}' /proc/meminfo)
MEMSIZEMB=$(($MEMSIZE/2**10))

if [ $MEMSIZEMB -lt 2000 ] ; then
  SWAPSIZE=$((2*$MEMSIZEMB))
elif [ $MEMSIZEMB -lt 8000 ] ; then
  SWAPSIZE=$MEMSIZEMB
else
  SWAPSIZE=8000
fi
if [ $SWAPSIZE -gt $DISKSPARE ] ; then SWAPSIZE=$DISKSPARE ; fi

# Declare useful variables
printf -v DRIVELIST ",%s" "${DRIVES[@]}"
if [ $NORAID ] ; then
  DRIVELIST=${DRIVES[0]}
else
  DRIVELIST=${DRIVELIST:1}
fi

echo "Final drive list: $DRIVELIST"
LEVEL=1
SPARE=0


# Error if detection has failed and fall back
if [ ${#DRIVES[@]} == 0 ] ; then
  echo "No drive suitable for installation found! Reverting to Anaconda defaults."

  cat > /tmp/part-include <<EOF
  # Clear the Master Boot Record
  zerombr

  # Clear current partitions
  clearpart --all  --initlabel

  # Automatically create partitions using LVM
  autopart --lvm --nohome
EOF

# Otherwise clear detected devices and set up bootloader
else
  cat > /tmp/part-include <<EOF
  # Clear the Master Boot Record
  zerombr

  # Clear current partitions and install bootloader
  clearpart --all --drives=$DRIVELIST --initlabel
  ignoredisk --only-use=$DRIVELIST
  bootloader --location=mbr --driveorder=$DRIVELIST
EOF

  # If single disk or noraid specific then set up partitioning without RAID
  # NOTE: From this point we're appending to part-include
  if [ ${#DRIVES[@]} == 1 ] || [ $NORAID ] ; then

    # Include the EFI or biosboot partition if necessary
    if [ -d /sys/firmware/efi ] ; then
      printf "part /boot/efi --fstype=efi --size=200 --ondisk=%s\n" "${DRIVES[0]}" >> /tmp/part-include
    elif [ $BASESIZE -gt 2048000 ] ; then
      printf "part biosboot --fstype=biosboot --size=1 --ondisk=%s\n" "${DRIVES[0]}" >> /tmp/part-include
    fi

    # Create boot partition
    printf "part /boot --fstype=%s --size=500  --label=BOOT --ondisk=%s\n" "$FSTYPE" "${DRIVES[0]}" >> /tmp/part-include

    # Default to LVM unless specified at command line
    if [ $NOLVM ] ; then
      cat >> /tmp/part-include <<EOF
      part / --fstype=$FSTYPE --grow --size=3000 --label=ROOT --ondisk=${DRIVES[0]}
      part swap --fstype=swap --recommended --label=SWAP --ondisk=${DRIVES[0]}
EOF
    else
      cat >> /tmp/part-include <<EOF
      part pv.01 --size=4300 --grow --ondisk=${DRIVES[0]}
      volgroup main pv.01
      logvol / --fstype=$FSTYPE --name=root --vgname=main --grow --size=3000
      logvol swap --fstype=swap --name=swap --vgname=main --recommended
EOF
    fi

  # Otherwise multiple disks - prepare for RAID
  else

    # Define EFI or biosboot and RAID partitions
    for i in "${!DRIVES[@]}"; do

      if [ -d /sys/firmware/efi ] ; then
        printf "part raid.%s0 --size=200 --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
      elif [ $BASESIZE -gt 2048000 ] ; then
        printf "part biosboot --fstype=biosboot --size=1 --ondisk=%s\n" "${DRIVES[$i]}" >> /tmp/part-include
      fi
      printf "part raid.%s1 --size=500 --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include

      # Default to LVM unless specified
      if [ $NOLVM ] ; then
        printf "part raid.%s2 --size=3000 --grow --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
        printf "part raid.%s3 --size=%s --ondisk=%s\n" "$i" "$SWAPSIZE" "${DRIVES[$i]}" >> /tmp/part-include
      else
        printf "part raid.%s2 --size=4300 --grow --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
      fi

    done

    # Compute RAID level
    # from https://wiki.contribs.org/Raid
    # 2 Drives - Software RAID 1
    # 3 Drives - Software RAID 1 + 1 Hot-spare
    # 4 Drives - Software RAID 6
    # 5+ Drives - Software RAID 6 + 1 Hot-spare

    if [ ${#DRIVES[@]} == 2 ] ; then
      LEVEL=1
      SPARE=0
    elif [ ${#DRIVES[@]} == 3 ] ; then
      LEVEL=1
      SPARE=1
    elif [ ${#DRIVES[@]} == 4 ] ; then
      LEVEL=6
      SPARE=0
    else
      LEVEL=6
      SPARE=1
    fi

    # Set up RAID devices
    printf -v EFIDEVS "raid.%s0 " "${!DRIVES[@]}"
    printf -v BOOTDEVS "raid.%s1 " "${!DRIVES[@]}"
    printf -v ROOTDEVS "raid.%s2 " "${!DRIVES[@]}"
    printf -v SWAPDEVS "raid.%s3 " "${!DRIVES[@]}"
    
    # Include the EFI partition if necessary
    if [ -d /sys/firmware/efi ] ; then
      printf "raid /boot/efi --fstype=efi --level=1 --spares=0 --device=md9 %s\n" "$EFIDEVS" >> /tmp/part-include
    fi

    # Boot partition
    printf "raid /boot --fstype=%s --level=1 --spares=0 --device=md0 %s\n" "$FSTYPE" "$BOOTDEVS" >> /tmp/part-include

    # Default to LVM unless specified
    if [ $NOLVM ] ; then
      cat >> /tmp/part-include <<EOF
      raid / --fstype=$FSTYPE --level=$LEVEL --spares=$SPARE --device=md1 $ROOTDEVS
      raid swap --fstype=swap --level=$LEVEL --spares=$SPARE --device=md2 $SWAPDEVS
EOF
    else
      cat >> /tmp/part-include <<EOF
      raid pv.01 --level=$LEVEL --spares=$SPARE --device=md1 $ROOTDEVS
      volgroup main pv.01
      logvol / --fstype=$FSTYPE --name=root --vgname=main --grow --size=3000
      logvol swap --fstype swap --name=swap --vgname=main --recommended
EOF
    fi
  fi
fi

echo "Final part-include output:"
cat /tmp/part-include

%end


# SME events in post-install
%post  --interpreter=/usr/bin/bash --log=/var/log/ks.post02.log
userdel -r installer
sleep 2
/sbin/e-smith/signal-event post-install
sleep 2
/sbin/e-smith/db configuration set UnsavedChanges no
touch /forcequotacheck
%end


%post  --nochroot --log=/mnt/sysimage/var/log/ks.post01.log
#!/bin/bash
sysimage="/mnt/sysimage"
cp -r /var/log/sme-partitioning.log ${sysimage}/root/
cp -r /tmp/anaconda.log ${sysimage}/root/
%end
1	unnilennium	1.1	# System authorization information
2			auth --enableshadow --passalgo=sha512
3	unnilennium	1.4
4	chrissn	1.5	# We do not want SELinux
5	unnilennium	1.1	selinux --disabled
6	unnilennium	1.4
7	chrissn	1.5	# Services to activate
8	unnilennium	1.3	services --disabled=lm_sensors
9	unnilennium	1.4
10	chrissn	1.5	# Default root pass, will be changed in post-install process anyway
11			rootpw --lock
12	chrissn	1.7	user --name=installer --uid=9999
13	unnilennium	1.1
14	chrissn	1.5	# Accept EULA
15	unnilennium	1.4	eula --agreed
16
17	chrissn	1.5	# Partitioning from pre section
18	unnilennium	1.3	%include /tmp/part-include
19	unnilennium	1.1
20	chrissn	1.5	# Disable kdump
21	unnilennium	1.4	%addon com_redhat_kdump --disable
22			%end
23
24
25	chrissn	1.5	# Add netinstall repos
26	jpp	1.13	#this one gives curl 6 errors on netinstall while added manually works from time to time
27			#url --mirrorlist https://mirrorlist.koozali.org/mirrorlist/smeos-10-x86_64
28			#repo --name=smeupdates --mirrorlist https://mirrorlist.koozali.org/mirrorlist/smeupdates-10-x86_64
29			repo --name=smeos --url http://distro.ibiblio.org/pub/linux/distributions/smeserver/releases/10/smeos/x86_64/
30			repo --name=smeupdates --url http://distro.ibiblio.org/pub/linux/distributions/smeserver/releases/testing/10/smeupdates/x86_64/
31	chrissn	1.5
32			# Packages to install
33			%packages
34			@^minimal
35			@base
36			@core
37			-chrony
38			-kexec-tools
39			%end
40
41	unnilennium	1.3
42	chrissn	1.5	# Partitioning in pre-install
43	chrissn	1.9	%pre --interpreter=/bin/bash --log=/var/log/sme-partitioning.log
44	chrissn	1.5
45	chrissn	1.9	# Read command line arguments
46			if grep nolvm "/proc/cmdline" ; then NOLVM=true ; fi
47			if grep noraid "/proc/cmdline" ; then NORAID=true ; fi
48	chrissn	1.10	if grep noxfs "/proc/cmdline" ; then FSTYPE="ext4" ; else FSTYPE="xfs" ; fi
49	chrissn	1.9	echo "Command line arguments:"
50			cat /proc/cmdline
51	unnilennium	1.3
52	chrissn	1.9	# Minimum size of hard drive needed specified in MB
53			MINSIZE=5000
54
55			# Number of detected drives and first disk size
56	unnilennium	1.4	NDEV=0
57	chrissn	1.9	BASESIZE=0
58			SIZEDIFF=0
59	unnilennium	1.3
60	chrissn	1.9	# Loop through block devices, keep those over MINSIZE and ensure additional drives for RAID are within 100MB of the first
61			for DEV in $(lsblk -nl \| grep disk \| cut -d' ' -f1) ; do
62			if [ -d /sys/block/$DEV ] ; then
63	unnilennium	1.4	REMOVABLE=`cat /sys/block/$DEV/removable`
64	chrissn	1.9	if (( $REMOVABLE == 0 )) ; then
65	unnilennium	1.4	SIZE=`cat /sys/block/$DEV/size`
66	chrissn	1.9	MB=$(($SIZE/2**11))
67			if [ $MB -gt $MINSIZE ] ; then
68			if [ $NDEV == 0 ] ; then
69			echo "First drive found: $DEV with size $MB MB"
70			DRIVES[$NDEV]=$DEV
71			BASESIZE=$MB
72			((NDEV++))
73			else
74			SIZEDIFF=$(($MB-$BASESIZE))
75			if [ $SIZEDIFF -gt 100 ] \|\| [ $SIZEDIFF -lt -100 ] ; then
76			echo "Drive found but size of $MB MB doesn't match $BASESIZE MB - ignoring"
77			else
78			echo "Additional drive found: $DEV with size $MB MB"
79			DRIVES[$NDEV]=$DEV
80			((NDEV++))
81			fi
82			fi
83	unnilennium	1.3	fi
84			fi
85			fi
86			done
87	chrissn	1.9	echo "Total disks found: $NDEV"
88
89			# Calculate recommended swap size for RAID + nolvm case
90			if [ -d /sys/firmware/efi ] ; then
91			DISKSPARE=$(($BASESIZE-200-500-3000))
92			else
93			DISKSPARE=$(($BASESIZE-1-500-3000))
94			fi
95			MEMSIZE=$(awk '/^MemTotal:/{print $2}' /proc/meminfo)
96			MEMSIZEMB=$(($MEMSIZE/2**10))
97
98			if [ $MEMSIZEMB -lt 2000 ] ; then
99			SWAPSIZE=$((2*$MEMSIZEMB))
100			elif [ $MEMSIZEMB -lt 8000 ] ; then
101			SWAPSIZE=$MEMSIZEMB
102			else
103			SWAPSIZE=8000
104			fi
105			if [ $SWAPSIZE -gt $DISKSPARE ] ; then SWAPSIZE=$DISKSPARE ; fi
106	unnilennium	1.3
107	chrissn	1.5	# Declare useful variables
108			printf -v DRIVELIST ",%s" "${DRIVES[@]}"
109	chrissn	1.9	if [ $NORAID ] ; then
110			DRIVELIST=${DRIVES[0]}
111			else
112			DRIVELIST=${DRIVELIST:1}
113			fi
114
115			echo "Final drive list: $DRIVELIST"
116	chrissn	1.5	LEVEL=1
117			SPARE=0
118
119	chrissn	1.9
120	chrissn	1.5	# Error if detection has failed and fall back
121			if [ ${#DRIVES[@]} == 0 ] ; then
122			echo "No drive suitable for installation found! Reverting to Anaconda defaults."
123
124			cat > /tmp/part-include <<EOF
125			# Clear the Master Boot Record
126			zerombr
127
128			# Clear current partitions
129			clearpart --all --initlabel
130	unnilennium	1.3
131	chrissn	1.5	# Automatically create partitions using LVM
132			autopart --lvm --nohome
133	unnilennium	1.3	EOF
134
135	chrissn	1.5	# Otherwise clear detected devices and set up bootloader
136	unnilennium	1.3	else
137	chrissn	1.5	cat > /tmp/part-include <<EOF
138			# Clear the Master Boot Record
139			zerombr
140
141			# Clear current partitions and install bootloader
142			clearpart --all --drives=$DRIVELIST --initlabel
143			ignoredisk --only-use=$DRIVELIST
144			bootloader --location=mbr --driveorder=$DRIVELIST
145			EOF
146
147	chrissn	1.9	# If single disk or noraid specific then set up partitioning without RAID
148	chrissn	1.5	# NOTE: From this point we're appending to part-include
149	chrissn	1.9	if [ ${#DRIVES[@]} == 1 ] \|\| [ $NORAID ] ; then
150	chrissn	1.5
151	chrissn	1.9	# Include the EFI or biosboot partition if necessary
152	chrissn	1.5	if [ -d /sys/firmware/efi ] ; then
153			printf "part /boot/efi --fstype=efi --size=200 --ondisk=%s\n" "${DRIVES[0]}" >> /tmp/part-include
154	chrissn	1.9	elif [ $BASESIZE -gt 2048000 ] ; then
155			printf "part biosboot --fstype=biosboot --size=1 --ondisk=%s\n" "${DRIVES[0]}" >> /tmp/part-include
156	chrissn	1.5	fi
157
158	chrissn	1.9	# Create boot partition
159	chrissn	1.10	printf "part /boot --fstype=%s --size=500 --label=BOOT --ondisk=%s\n" "$FSTYPE" "${DRIVES[0]}" >> /tmp/part-include
160	chrissn	1.9
161			# Default to LVM unless specified at command line
162			if [ $NOLVM ] ; then
163			cat >> /tmp/part-include <<EOF
164	chrissn	1.10	part / --fstype=$FSTYPE --grow --size=3000 --label=ROOT --ondisk=${DRIVES[0]}
165	chrissn	1.9	part swap --fstype=swap --recommended --label=SWAP --ondisk=${DRIVES[0]}
166	chrissn	1.5	EOF
167	chrissn	1.9	else
168			cat >> /tmp/part-include <<EOF
169			part pv.01 --size=4300 --grow --ondisk=${DRIVES[0]}
170			volgroup main pv.01
171	chrissn	1.10	logvol / --fstype=$FSTYPE --name=root --vgname=main --grow --size=3000
172	chrissn	1.9	logvol swap --fstype=swap --name=swap --vgname=main --recommended
173			EOF
174			fi
175	chrissn	1.5
176			# Otherwise multiple disks - prepare for RAID
177			else
178	unnilennium	1.3
179	chrissn	1.9	# Define EFI or biosboot and RAID partitions
180	chrissn	1.5	for i in "${!DRIVES[@]}"; do
181	chrissn	1.9
182	chrissn	1.5	if [ -d /sys/firmware/efi ] ; then
183			printf "part raid.%s0 --size=200 --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
184	chrissn	1.9	elif [ $BASESIZE -gt 2048000 ] ; then
185			printf "part biosboot --fstype=biosboot --size=1 --ondisk=%s\n" "${DRIVES[$i]}" >> /tmp/part-include
186	chrissn	1.5	fi
187			printf "part raid.%s1 --size=500 --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
188	chrissn	1.9
189			# Default to LVM unless specified
190			if [ $NOLVM ] ; then
191			printf "part raid.%s2 --size=3000 --grow --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
192			printf "part raid.%s3 --size=%s --ondisk=%s\n" "$i" "$SWAPSIZE" "${DRIVES[$i]}" >> /tmp/part-include
193			else
194			printf "part raid.%s2 --size=4300 --grow --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
195			fi
196
197	chrissn	1.5	done
198
199			# Compute RAID level
200			# from https://wiki.contribs.org/Raid
201			# 2 Drives - Software RAID 1
202			# 3 Drives - Software RAID 1 + 1 Hot-spare
203	chrissn	1.6	# 4 Drives - Software RAID 6
204			# 5+ Drives - Software RAID 6 + 1 Hot-spare
205	chrissn	1.5
206			if [ ${#DRIVES[@]} == 2 ] ; then
207			LEVEL=1
208			SPARE=0
209			elif [ ${#DRIVES[@]} == 3 ] ; then
210			LEVEL=1
211			SPARE=1
212	chrissn	1.6	elif [ ${#DRIVES[@]} == 4 ] ; then
213			LEVEL=6
214			SPARE=0
215	chrissn	1.5	else
216			LEVEL=6
217			SPARE=1
218			fi
219	unnilennium	1.3
220	chrissn	1.5	# Set up RAID devices
221			printf -v EFIDEVS "raid.%s0 " "${!DRIVES[@]}"
222			printf -v BOOTDEVS "raid.%s1 " "${!DRIVES[@]}"
223			printf -v ROOTDEVS "raid.%s2 " "${!DRIVES[@]}"
224	chrissn	1.9	printf -v SWAPDEVS "raid.%s3 " "${!DRIVES[@]}"
225	chrissn	1.5
226			# Include the EFI partition if necessary
227			if [ -d /sys/firmware/efi ] ; then
228	chrissn	1.6	printf "raid /boot/efi --fstype=efi --level=1 --spares=0 --device=md9 %s\n" "$EFIDEVS" >> /tmp/part-include
229	chrissn	1.5	fi
230	unnilennium	1.3
231	chrissn	1.9	# Boot partition
232	chrissn	1.10	printf "raid /boot --fstype=%s --level=1 --spares=0 --device=md0 %s\n" "$FSTYPE" "$BOOTDEVS" >> /tmp/part-include
233	unnilennium	1.3
234	chrissn	1.9	# Default to LVM unless specified
235			if [ $NOLVM ] ; then
236			cat >> /tmp/part-include <<EOF
237	chrissn	1.10	raid / --fstype=$FSTYPE --level=$LEVEL --spares=$SPARE --device=md1 $ROOTDEVS
238	chrissn	1.9	raid swap --fstype=swap --level=$LEVEL --spares=$SPARE --device=md2 $SWAPDEVS
239			EOF
240			else
241			cat >> /tmp/part-include <<EOF
242			raid pv.01 --level=$LEVEL --spares=$SPARE --device=md1 $ROOTDEVS
243			volgroup main pv.01
244	chrissn	1.10	logvol / --fstype=$FSTYPE --name=root --vgname=main --grow --size=3000
245	chrissn	1.9	logvol swap --fstype swap --name=swap --vgname=main --recommended
246	chrissn	1.5	EOF
247	chrissn	1.9	fi
248	chrissn	1.5	fi
249			fi
250	unnilennium	1.1
251	chrissn	1.9	echo "Final part-include output:"
252			cat /tmp/part-include
253
254	unnilennium	1.1	%end
255
256
257	chrissn	1.5	# SME events in post-install
258	unnilennium	1.4	%post --interpreter=/usr/bin/bash --log=/var/log/ks.post02.log
259	chrissn	1.7	userdel -r installer
260			sleep 2
261			/sbin/e-smith/signal-event post-install
262			sleep 2
263			/sbin/e-smith/db configuration set UnsavedChanges no
264	unnilennium	1.1	touch /forcequotacheck
265	chrissn	1.5	%end
266	unnilennium	1.1
267	unnilennium	1.4
268			%post --nochroot --log=/mnt/sysimage/var/log/ks.post01.log
269			#!/bin/bash
270			sysimage="/mnt/sysimage"
271	chrissn	1.9	cp -r /var/log/sme-partitioning.log ${sysimage}/root/
272	unnilennium	1.4	cp -r /tmp/anaconda.log ${sysimage}/root/
273			%end