Packages/base/sme-kickstart.cfg

# System authorization information
auth --enableshadow --passalgo=sha512
# Use CDROM installation media
cdrom
# we do not want Selinux
selinux --disabled
# services to activate
services --disabled=lm_sensors
# default root pass, willbe changed in post-install process anyway
rootpw --lock 

# include the partitioning logic from the pre section.
%include /tmp/part-include

%pre
# pre section
#----- partitioning logic below--------------
# pick the first drive that is not removable and is over MINSIZE
DIR="/sys/block"

# minimum size of hard drive needed specified in GIGABYTES
MINSIZE=20

ROOTDRIVE=""

# /sys/block/*/size is in 512 byte chunks

for DEV in sda sdb sdc sdd hda hdb vda vdb xvda xvdb; do
  if [ -d $DIR/$DEV ]; then
    REMOVABLE=`cat $DIR/$DEV/removable`
    if (( $REMOVABLE == 0 )); then
      echo $DEV
      SIZE=`cat $DIR/$DEV/size`
      GB=$(($SIZE/2**21))
      if [ $GB -gt $MINSIZE ]; then
        echo "$(($SIZE/2**21))"
        if [ -z $ROOTDRIVE ]; then
          ROOTDRIVE=$DEV
        fi
      fi
    fi
  fi
done

echo "ROOTDRIVE=$ROOTDRIVE"

# drives smaller than 40GB use smaller boot and swap partitions
# drives larger than 40GB use percentage-based partition sizes

if [ $GB -lt 40 ]; then

# drives smaller than 40GB
cat << EOF > /tmp/part-include
zerombr
clearpart --all --drives=$ROOTDRIVE --initlabel
bootloader --location=mbr --driveorder=$ROOTDRIVE
# for boot partition
part /boot --fstype ext4 --size=300 --ondisk=$ROOTDRIVE
# for LVM partition
part pv.8 --size=4600 --grow --ondisk=$ROOTDRIVE
# LVM
volgroup main --pesize=65536 pv.8
logvol / --fstype ext4 --name=root --vgname=main --grow --size=3000
logvol swap --fstype swap --name=swap --vgname=main --size=1500

EOF


else
# drives 40GB and larger

cat << EOF > /tmp/part-include
zerombr
clearpart --all --drives=$ROOTDRIVE --initlabel
bootloader --location=mbr --driveorder=$ROOTDRIVE
# for boot partition
part /boot --fstype ext4 --size=500 --ondisk=$ROOTDRIVE
# for LVM partition
part pv.8 --size=4600 --grow --ondisk=$ROOTDRIVE
# LVM
volgroup main --pesize=65536 pv.8
logvol / --fstype ext4 --name=root --vgname=main --grow  --size=3000
logvol swap --fstype swap --name=swap --vgname=main --size=4000

EOF

fi

%end


# packages to install
%packages
@^minimal
@base
@core
-chrony
-kexec-tools

%end


# pre script could be inserted there to handle partitionning

%post  --interpreter=/usr/bin/bash
# before reboot performing post-install
# this is for first alpha iso. we should put this in anaconda
# and / or handle possible upgrade later
/sbin/rsyslogd; 
sleep 2; 
/sbin/e-smith/signal-event post-install; 
sleep 2;
/sbin/e-smith/db configuration set UnsavedChanges no;
touch /forcequotacheck

%end
1	unnilennium	1.1	# System authorization information
2			auth --enableshadow --passalgo=sha512
3			# Use CDROM installation media
4			cdrom
5	unnilennium	1.3	# we do not want Selinux
6	unnilennium	1.1	selinux --disabled
7	unnilennium	1.3	# services to activate
8			services --disabled=lm_sensors
9			# default root pass, willbe changed in post-install process anyway
10			rootpw --lock
11	unnilennium	1.1
12	unnilennium	1.3	# include the partitioning logic from the pre section.
13			%include /tmp/part-include
14	unnilennium	1.1
15	unnilennium	1.3	%pre
16			# pre section
17			#----- partitioning logic below--------------
18			# pick the first drive that is not removable and is over MINSIZE
19			DIR="/sys/block"
20
21			# minimum size of hard drive needed specified in GIGABYTES
22			MINSIZE=20
23
24			ROOTDRIVE=""
25
26			# /sys/block/*/size is in 512 byte chunks
27
28			for DEV in sda sdb sdc sdd hda hdb vda vdb xvda xvdb; do
29			if [ -d $DIR/$DEV ]; then
30			REMOVABLE=`cat $DIR/$DEV/removable`
31			if (( $REMOVABLE == 0 )); then
32			echo $DEV
33			SIZE=`cat $DIR/$DEV/size`
34			GB=$(($SIZE/2**21))
35			if [ $GB -gt $MINSIZE ]; then
36			echo "$(($SIZE/2**21))"
37			if [ -z $ROOTDRIVE ]; then
38			ROOTDRIVE=$DEV
39			fi
40			fi
41			fi
42			fi
43			done
44
45			echo "ROOTDRIVE=$ROOTDRIVE"
46	unnilennium	1.2
47	unnilennium	1.3	# drives smaller than 40GB use smaller boot and swap partitions
48			# drives larger than 40GB use percentage-based partition sizes
49	unnilennium	1.2
50	unnilennium	1.3	if [ $GB -lt 40 ]; then
51
52			# drives smaller than 40GB
53			cat << EOF > /tmp/part-include
54	unnilennium	1.2	zerombr
55	unnilennium	1.3	clearpart --all --drives=$ROOTDRIVE --initlabel
56			bootloader --location=mbr --driveorder=$ROOTDRIVE
57			# for boot partition
58			part /boot --fstype ext4 --size=300 --ondisk=$ROOTDRIVE
59			# for LVM partition
60			part pv.8 --size=4600 --grow --ondisk=$ROOTDRIVE
61			# LVM
62			volgroup main --pesize=65536 pv.8
63			logvol / --fstype ext4 --name=root --vgname=main --grow --size=3000
64			logvol swap --fstype swap --name=swap --vgname=main --size=1500
65
66			EOF
67
68
69			else
70			# drives 40GB and larger
71
72			cat << EOF > /tmp/part-include
73			zerombr
74			clearpart --all --drives=$ROOTDRIVE --initlabel
75			bootloader --location=mbr --driveorder=$ROOTDRIVE
76			# for boot partition
77			part /boot --fstype ext4 --size=500 --ondisk=$ROOTDRIVE
78			# for LVM partition
79			part pv.8 --size=4600 --grow --ondisk=$ROOTDRIVE
80			# LVM
81			volgroup main --pesize=65536 pv.8
82			logvol / --fstype ext4 --name=root --vgname=main --grow --size=3000
83			logvol swap --fstype swap --name=swap --vgname=main --size=4000
84
85			EOF
86
87			fi
88
89			%end
90
91
92
93
94
95
96
97
98
99
100
101
102	unnilennium	1.2
103	unnilennium	1.1
104
105
106
107	unnilennium	1.2	# packages to install
108	unnilennium	1.1	%packages
109			@^minimal
110			@base
111			@core
112			-chrony
113			-kexec-tools
114
115			%end
116
117
118			# pre script could be inserted there to handle partitionning
119
120	unnilennium	1.2	%post --interpreter=/usr/bin/bash
121	unnilennium	1.1	# before reboot performing post-install
122			# this is for first alpha iso. we should put this in anaconda
123			# and / or handle possible upgrade later
124			/sbin/rsyslogd;
125			sleep 2;
126			/sbin/e-smith/signal-event post-install;
127	unnilennium	1.2	sleep 2;
128			/sbin/e-smith/db configuration set UnsavedChanges no;
129	unnilennium	1.1	touch /forcequotacheck
130
131			%end