Packages/base/sme-kickstart.cfg

# System authorization information
auth --enableshadow --passalgo=sha512

# Use CDROM installation media
#cdrom #what about usb stick

# we do not want Selinux
selinux --disabled

# services to activate
services --disabled=lm_sensors

# default root pass, willbe changed in post-install process anyway
rootpw --lock 

# Accept eula
eula --agreed

# include the partitioning logic from the pre section.
%include /tmp/part-include

# disable kdump
%addon com_redhat_kdump --disable
%end


%pre
# pre section
#----- partitioning logic below--------------
# pick the first drive that is not removable and is over MINSIZE
DIR="/sys/block"

# minimum size of hard drive needed specified in GIGABYTES
MINSIZE=5


# Number of detected drives
NDEV=0

for DEV in $(lsblk -nl | grep disk | cut -d' ' -f1); do
  if [ -d /sys/block/$DEV ]; then
    REMOVABLE=`cat /sys/block/$DEV/removable`
    if (( $REMOVABLE == 0 )); then
      SIZE=`cat /sys/block/$DEV/size`
      GB=$(($SIZE/2**21))
      if [ $GB -gt $MINSIZE ]; then
        DRIVES[$NDEV]=$DEV
        ((NDEV++))
      fi
    fi
  fi
done

# For now keep things simple and just use the first one
# TODO:
# * Create software RAID depending on the number of detected drives
# * Allow non LVM install

ROOTDRIVE=${DRIVES[0]}
if [ $ROOTDRIVE == "" ] ; then
echo "No drive suitable for installation found! Please proceed manually."
# first in case detection fails...
cat << EOF > /tmp/part-include
# Clear the Master Boot Record
zerombr
# System bootloader configuration
clearpart --all  --initlabel
# Automatically create partitions, no LVM
autopart --lvm

EOF

else
cat <<_EOF > /tmp/part-include
zerombr
clearpart --all --drives=$ROOTDRIVE --initlabel
bootloader --boot-drive=$ROOTDRIVE
part /boot --fstype xfs --size=500 --ondisk=$ROOTDRIVE --label=BOOT
part pv.01 --size=4500 --grow --ondisk=$ROOTDRIVE
volgroup main pv.01
logvol / --fstype xfs --name=root --vgname=main --grow --size=3000 --label=ROOT
logvol swap --fstype swap --name=swap --vgname=main --recommended --label=SWAP
_EOF

fi

%end


# packages to install
%packages
@^minimal
@base
@core
-chrony
-kexec-tools

%end


%post  --interpreter=/usr/bin/bash --log=/var/log/ks.post02.log
# before reboot performing post-install
# this is for first alpha iso. we should put this in anaconda
# and / or handle possible upgrade later
/sbin/rsyslogd; 
sleep 2; 
/sbin/e-smith/signal-event post-install; 
sleep 2;
/sbin/e-smith/db configuration set UnsavedChanges no;
touch /forcequotacheck

%end

%post  --nochroot --log=/mnt/sysimage/var/log/ks.post01.log
#!/bin/bash
sysimage="/mnt/sysimage"

cp -r /tmp/anaconda.log ${sysimage}/root/
%end
1	unnilennium	1.1	# System authorization information
2			auth --enableshadow --passalgo=sha512
3	unnilennium	1.4
4	unnilennium	1.1	# Use CDROM installation media
5	unnilennium	1.4	#cdrom #what about usb stick
6
7	unnilennium	1.3	# we do not want Selinux
8	unnilennium	1.1	selinux --disabled
9	unnilennium	1.4
10	unnilennium	1.3	# services to activate
11			services --disabled=lm_sensors
12	unnilennium	1.4
13	unnilennium	1.3	# default root pass, willbe changed in post-install process anyway
14			rootpw --lock
15	unnilennium	1.1
16	unnilennium	1.4	# Accept eula
17			eula --agreed
18
19	unnilennium	1.3	# include the partitioning logic from the pre section.
20			%include /tmp/part-include
21	unnilennium	1.1
22	unnilennium	1.4	# disable kdump
23			%addon com_redhat_kdump --disable
24			%end
25
26
27	unnilennium	1.3	%pre
28			# pre section
29			#----- partitioning logic below--------------
30			# pick the first drive that is not removable and is over MINSIZE
31			DIR="/sys/block"
32
33			# minimum size of hard drive needed specified in GIGABYTES
34	unnilennium	1.4	MINSIZE=5
35	unnilennium	1.3
36
37	unnilennium	1.4	# Number of detected drives
38			NDEV=0
39	unnilennium	1.3
40	unnilennium	1.4	for DEV in $(lsblk -nl \| grep disk \| cut -d' ' -f1); do
41			if [ -d /sys/block/$DEV ]; then
42			REMOVABLE=`cat /sys/block/$DEV/removable`
43	unnilennium	1.3	if (( $REMOVABLE == 0 )); then
44	unnilennium	1.4	SIZE=`cat /sys/block/$DEV/size`
45	unnilennium	1.3	GB=$(($SIZE/2**21))
46			if [ $GB -gt $MINSIZE ]; then
47	unnilennium	1.4	DRIVES[$NDEV]=$DEV
48			((NDEV++))
49	unnilennium	1.3	fi
50			fi
51			fi
52			done
53
54	unnilennium	1.4	# For now keep things simple and just use the first one
55			# TODO:
56			# * Create software RAID depending on the number of detected drives
57			# * Allow non LVM install
58
59			ROOTDRIVE=${DRIVES[0]}
60			if [ $ROOTDRIVE == "" ] ; then
61			echo "No drive suitable for installation found! Please proceed manually."
62			# first in case detection fails...
63	unnilennium	1.3	cat << EOF > /tmp/part-include
64	unnilennium	1.4	# Clear the Master Boot Record
65	unnilennium	1.2	zerombr
66	unnilennium	1.4	# System bootloader configuration
67			clearpart --all --initlabel
68			# Automatically create partitions, no LVM
69			autopart --lvm
70	unnilennium	1.3
71			EOF
72
73			else
74	unnilennium	1.4	cat <<_EOF > /tmp/part-include
75	unnilennium	1.3	zerombr
76			clearpart --all --drives=$ROOTDRIVE --initlabel
77	unnilennium	1.4	bootloader --boot-drive=$ROOTDRIVE
78			part /boot --fstype xfs --size=500 --ondisk=$ROOTDRIVE --label=BOOT
79			part pv.01 --size=4500 --grow --ondisk=$ROOTDRIVE
80			volgroup main pv.01
81			logvol / --fstype xfs --name=root --vgname=main --grow --size=3000 --label=ROOT
82			logvol swap --fstype swap --name=swap --vgname=main --recommended --label=SWAP
83			_EOF
84	unnilennium	1.3
85			fi
86
87			%end
88
89
90
91	unnilennium	1.2	# packages to install
92	unnilennium	1.1	%packages
93			@^minimal
94			@base
95			@core
96			-chrony
97			-kexec-tools
98
99			%end
100
101
102
103	unnilennium	1.4	%post --interpreter=/usr/bin/bash --log=/var/log/ks.post02.log
104	unnilennium	1.1	# before reboot performing post-install
105			# this is for first alpha iso. we should put this in anaconda
106			# and / or handle possible upgrade later
107			/sbin/rsyslogd;
108			sleep 2;
109			/sbin/e-smith/signal-event post-install;
110	unnilennium	1.2	sleep 2;
111			/sbin/e-smith/db configuration set UnsavedChanges no;
112	unnilennium	1.1	touch /forcequotacheck
113
114			%end
115	unnilennium	1.4
116			%post --nochroot --log=/mnt/sysimage/var/log/ks.post01.log
117			#!/bin/bash
118			sysimage="/mnt/sysimage"
119
120			cp -r /tmp/anaconda.log ${sysimage}/root/
121			%end