Packages/base/sme-kickstart.cfg

# System authorization information
auth --enableshadow --passalgo=sha512

# We do not want SELinux
selinux --disabled

# Services to activate
services --disabled=lm_sensors

# Default root pass, will be changed in post-install process anyway
rootpw --lock
user --name=installer --uid=9999

# Accept EULA
eula --agreed

# Partitioning from pre section
%include /tmp/part-include

# Disable kdump
%addon com_redhat_kdump --disable
%end


# Add netinstall repos
#this one gives curl 6 errors on netinstall while added manually works from time to time
#url --mirrorlist https://mirrorlist.koozali.org/mirrorlist/smeos-10-x86_64 
#repo --name=smeupdates --mirrorlist https://mirrorlist.koozali.org/mirrorlist/smeupdates-10-x86_64
#repo --name=smeos --baseurl http://distro.ibiblio.org/pub/linux/distributions/smeserver/releases/10/smeos/x86_64/
#repo --name=smeupdates --baseurl http://distro.ibiblio.org/pub/linux/distributions/smeserver/releases/10/smeupdates/x86_64/
repo --name=smeos --mirrorlist https://mirrorlist.koozali.org/mirrorlist/smeos-10-x86_64
repo --name=smeupdates --mirrorlist https://mirrorlist.koozali.org/mirrorlist/smeupdates-10-x86_64

# Packages to install
%packages
@^minimal
@base
@core
-chrony
-kexec-tools
%end


# Partitioning in pre-install
%pre --interpreter=/bin/bash --log=/var/log/sme-partitioning.log

# Read command line arguments
if grep nolvm "/proc/cmdline" ; then NOLVM=true ; fi
if grep noraid "/proc/cmdline" ; then NORAID=true ; fi
if grep noxfs "/proc/cmdline" ; then FSTYPE="ext4" ; else FSTYPE="xfs" ; fi 
echo "Command line arguments:"
cat /proc/cmdline

# Minimum size of hard drive needed specified in MB
MINSIZE=5000

# Number of detected drives and first disk size
NDEV=0
BASESIZE=0
SIZEDIFF=0

# Loop through block devices, keep those over MINSIZE and ensure additional drives for RAID are within 100MB of the first
for DEV in $(lsblk -nl | grep disk | cut -d' ' -f1) ; do
  if [ -d /sys/block/$DEV ] ; then
    REMOVABLE=`cat /sys/block/$DEV/removable`
    if (( $REMOVABLE == 0 )) ; then
      SIZE=`cat /sys/block/$DEV/size`
      MB=$(($SIZE/2**11))
      if [ $MB -gt $MINSIZE ] ; then
        if [ $NDEV == 0 ] ; then
          echo "First drive found: $DEV with size $MB MB"
          DRIVES[$NDEV]=$DEV
          BASESIZE=$MB
          ((NDEV++))
        else
          SIZEDIFF=$(($MB-$BASESIZE))
          if [ $SIZEDIFF -gt 100 ] || [ $SIZEDIFF -lt -100 ] ; then
            echo "Drive found but size of $MB MB doesn't match $BASESIZE MB - ignoring"
          else
            echo "Additional drive found: $DEV with size $MB MB"
            DRIVES[$NDEV]=$DEV
            ((NDEV++))
          fi
        fi
      fi
    fi
  fi
done
echo "Total disks found: $NDEV"

# Calculate recommended swap size for RAID + nolvm case
if [ -d /sys/firmware/efi ] ; then
  DISKSPARE=$(($BASESIZE-200-500-3000))
else
  DISKSPARE=$(($BASESIZE-1-500-3000))
fi
MEMSIZE=$(awk '/^MemTotal:/{print $2}' /proc/meminfo)
MEMSIZEMB=$(($MEMSIZE/2**10))

if [ $MEMSIZEMB -lt 2000 ] ; then
  SWAPSIZE=$((2*$MEMSIZEMB))
elif [ $MEMSIZEMB -lt 8000 ] ; then
  SWAPSIZE=$MEMSIZEMB
else
  SWAPSIZE=8000
fi
if [ $SWAPSIZE -gt $DISKSPARE ] ; then SWAPSIZE=$DISKSPARE ; fi

# Declare useful variables
printf -v DRIVELIST ",%s" "${DRIVES[@]}"
if [ $NORAID ] ; then
  DRIVELIST=${DRIVES[0]}
else
  DRIVELIST=${DRIVELIST:1}
fi

echo "Final drive list: $DRIVELIST"
LEVEL=1
SPARE=0


# Error if detection has failed and fall back
if [ ${#DRIVES[@]} == 0 ] ; then
  echo "No drive suitable for installation found! Reverting to Anaconda defaults."

  cat > /tmp/part-include <<EOF
  # Clear the Master Boot Record
  zerombr

  # Clear current partitions
  clearpart --all  --initlabel

  # Automatically create partitions using LVM
  autopart --lvm --nohome
EOF

# Otherwise clear detected devices and set up bootloader
else
  cat > /tmp/part-include <<EOF
  # Clear the Master Boot Record
  zerombr

  # Clear current partitions and install bootloader
  clearpart --all --drives=$DRIVELIST --initlabel
  ignoredisk --only-use=$DRIVELIST
  bootloader --location=mbr --driveorder=$DRIVELIST
EOF

  # If single disk or noraid specific then set up partitioning without RAID
  # NOTE: From this point we're appending to part-include
  if [ ${#DRIVES[@]} == 1 ] || [ $NORAID ] ; then

    # Include the EFI or biosboot partition if necessary
    if [ -d /sys/firmware/efi ] ; then
      printf "part /boot/efi --fstype=efi --size=200 --ondisk=%s\n" "${DRIVES[0]}" >> /tmp/part-include
    elif [ $BASESIZE -gt 2048000 ] ; then
      printf "part biosboot --fstype=biosboot --size=1 --ondisk=%s\n" "${DRIVES[0]}" >> /tmp/part-include
    fi

    # Create boot partition
    printf "part /boot --fstype=%s --size=500  --label=BOOT --ondisk=%s\n" "$FSTYPE" "${DRIVES[0]}" >> /tmp/part-include

    # Default to LVM unless specified at command line
    if [ $NOLVM ] ; then
      cat >> /tmp/part-include <<EOF
      part / --fstype=$FSTYPE --grow --size=3000 --label=ROOT --ondisk=${DRIVES[0]}
      part swap --fstype=swap --recommended --label=SWAP --ondisk=${DRIVES[0]}
EOF
    else
      cat >> /tmp/part-include <<EOF
      part pv.01 --size=4300 --grow --ondisk=${DRIVES[0]}
      volgroup main pv.01
      logvol / --fstype=$FSTYPE --name=root --vgname=main --grow --size=3000
      logvol swap --fstype=swap --name=swap --vgname=main --recommended
EOF
    fi

  # Otherwise multiple disks - prepare for RAID
  else

    # Define EFI or biosboot and RAID partitions
    for i in "${!DRIVES[@]}"; do

      if [ -d /sys/firmware/efi ] ; then
        printf "part raid.%s0 --size=200 --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
      elif [ $BASESIZE -gt 2048000 ] ; then
        printf "part biosboot --fstype=biosboot --size=1 --ondisk=%s\n" "${DRIVES[$i]}" >> /tmp/part-include
      fi
      printf "part raid.%s1 --size=500 --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include

      # Default to LVM unless specified
      if [ $NOLVM ] ; then
        printf "part raid.%s2 --size=3000 --grow --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
        printf "part raid.%s3 --size=%s --ondisk=%s\n" "$i" "$SWAPSIZE" "${DRIVES[$i]}" >> /tmp/part-include
      else
        printf "part raid.%s2 --size=4300 --grow --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
      fi

    done

    # Compute RAID level
    # from https://wiki.contribs.org/Raid
    # 2 Drives - Software RAID 1
    # 3 Drives - Software RAID 1 + 1 Hot-spare
    # 4 Drives - Software RAID 6
    # 5+ Drives - Software RAID 6 + 1 Hot-spare

    if [ ${#DRIVES[@]} == 2 ] ; then
      LEVEL=1
      SPARE=0
    elif [ ${#DRIVES[@]} == 3 ] ; then
      LEVEL=1
      SPARE=1
    elif [ ${#DRIVES[@]} == 4 ] ; then
      LEVEL=6
      SPARE=0
    else
      LEVEL=6
      SPARE=1
    fi

    # Set up RAID devices
    printf -v EFIDEVS "raid.%s0 " "${!DRIVES[@]}"
    printf -v BOOTDEVS "raid.%s1 " "${!DRIVES[@]}"
    printf -v ROOTDEVS "raid.%s2 " "${!DRIVES[@]}"
    printf -v SWAPDEVS "raid.%s3 " "${!DRIVES[@]}"
    
    # Include the EFI partition if necessary
    if [ -d /sys/firmware/efi ] ; then
      printf "raid /boot/efi --fstype=efi --level=1 --spares=0 --device=md9 %s\n" "$EFIDEVS" >> /tmp/part-include
    fi

    # Boot partition
    printf "raid /boot --fstype=%s --level=1 --spares=0 --device=md0 %s\n" "$FSTYPE" "$BOOTDEVS" >> /tmp/part-include

    # Default to LVM unless specified
    if [ $NOLVM ] ; then
      cat >> /tmp/part-include <<EOF
      raid / --fstype=$FSTYPE --level=$LEVEL --spares=$SPARE --device=md1 $ROOTDEVS
      raid swap --fstype=swap --level=$LEVEL --spares=$SPARE --device=md2 $SWAPDEVS
EOF
    else
      cat >> /tmp/part-include <<EOF
      raid pv.01 --level=$LEVEL --spares=$SPARE --device=md1 $ROOTDEVS
      volgroup main pv.01
      logvol / --fstype=$FSTYPE --name=root --vgname=main --grow --size=3000
      logvol swap --fstype swap --name=swap --vgname=main --recommended
EOF
    fi
  fi
fi

echo "Final part-include output:"
cat /tmp/part-include

%end


# SME events in post-install
%post  --interpreter=/usr/bin/bash --log=/var/log/ks.post02.log
userdel -r installer
sleep 2
/sbin/e-smith/signal-event post-install
sleep 2
/sbin/e-smith/db configuration set UnsavedChanges no
touch /forcequotacheck
%end


%post  --nochroot --log=/mnt/sysimage/var/log/ks.post01.log
#!/bin/bash
sysimage="/mnt/sysimage"
cp -r /var/log/sme-partitioning.log ${sysimage}/root/
cp -r /tmp/anaconda.log ${sysimage}/root/
%end
1	# System authorization information
2	auth --enableshadow --passalgo=sha512
3
4	# We do not want SELinux
5	selinux --disabled
6
7	# Services to activate
8	services --disabled=lm_sensors
9
10	# Default root pass, will be changed in post-install process anyway
11	rootpw --lock
12	user --name=installer --uid=9999
13
14	# Accept EULA
15	eula --agreed
16
17	# Partitioning from pre section
18	%include /tmp/part-include
19
20	# Disable kdump
21	%addon com_redhat_kdump --disable
22	%end
23
24
25	# Add netinstall repos
26	#this one gives curl 6 errors on netinstall while added manually works from time to time
27	#url --mirrorlist https://mirrorlist.koozali.org/mirrorlist/smeos-10-x86_64
28	#repo --name=smeupdates --mirrorlist https://mirrorlist.koozali.org/mirrorlist/smeupdates-10-x86_64
29	#repo --name=smeos --baseurl http://distro.ibiblio.org/pub/linux/distributions/smeserver/releases/10/smeos/x86_64/
30	#repo --name=smeupdates --baseurl http://distro.ibiblio.org/pub/linux/distributions/smeserver/releases/10/smeupdates/x86_64/
31	repo --name=smeos --mirrorlist https://mirrorlist.koozali.org/mirrorlist/smeos-10-x86_64
32	repo --name=smeupdates --mirrorlist https://mirrorlist.koozali.org/mirrorlist/smeupdates-10-x86_64
33
34	# Packages to install
35	%packages
36	@^minimal
37	@base
38	@core
39	-chrony
40	-kexec-tools
41	%end
42
43
44	# Partitioning in pre-install
45	%pre --interpreter=/bin/bash --log=/var/log/sme-partitioning.log
46
47	# Read command line arguments
48	if grep nolvm "/proc/cmdline" ; then NOLVM=true ; fi
49	if grep noraid "/proc/cmdline" ; then NORAID=true ; fi
50	if grep noxfs "/proc/cmdline" ; then FSTYPE="ext4" ; else FSTYPE="xfs" ; fi
51	echo "Command line arguments:"
52	cat /proc/cmdline
53
54	# Minimum size of hard drive needed specified in MB
55	MINSIZE=5000
56
57	# Number of detected drives and first disk size
58	NDEV=0
59	BASESIZE=0
60	SIZEDIFF=0
61
62	# Loop through block devices, keep those over MINSIZE and ensure additional drives for RAID are within 100MB of the first
63	for DEV in $(lsblk -nl \| grep disk \| cut -d' ' -f1) ; do
64	if [ -d /sys/block/$DEV ] ; then
65	REMOVABLE=`cat /sys/block/$DEV/removable`
66	if (( $REMOVABLE == 0 )) ; then
67	SIZE=`cat /sys/block/$DEV/size`
68	MB=$(($SIZE/2**11))
69	if [ $MB -gt $MINSIZE ] ; then
70	if [ $NDEV == 0 ] ; then
71	echo "First drive found: $DEV with size $MB MB"
72	DRIVES[$NDEV]=$DEV
73	BASESIZE=$MB
74	((NDEV++))
75	else
76	SIZEDIFF=$(($MB-$BASESIZE))
77	if [ $SIZEDIFF -gt 100 ] \|\| [ $SIZEDIFF -lt -100 ] ; then
78	echo "Drive found but size of $MB MB doesn't match $BASESIZE MB - ignoring"
79	else
80	echo "Additional drive found: $DEV with size $MB MB"
81	DRIVES[$NDEV]=$DEV
82	((NDEV++))
83	fi
84	fi
85	fi
86	fi
87	fi
88	done
89	echo "Total disks found: $NDEV"
90
91	# Calculate recommended swap size for RAID + nolvm case
92	if [ -d /sys/firmware/efi ] ; then
93	DISKSPARE=$(($BASESIZE-200-500-3000))
94	else
95	DISKSPARE=$(($BASESIZE-1-500-3000))
96	fi
97	MEMSIZE=$(awk '/^MemTotal:/{print $2}' /proc/meminfo)
98	MEMSIZEMB=$(($MEMSIZE/2**10))
99
100	if [ $MEMSIZEMB -lt 2000 ] ; then
101	SWAPSIZE=$((2*$MEMSIZEMB))
102	elif [ $MEMSIZEMB -lt 8000 ] ; then
103	SWAPSIZE=$MEMSIZEMB
104	else
105	SWAPSIZE=8000
106	fi
107	if [ $SWAPSIZE -gt $DISKSPARE ] ; then SWAPSIZE=$DISKSPARE ; fi
108
109	# Declare useful variables
110	printf -v DRIVELIST ",%s" "${DRIVES[@]}"
111	if [ $NORAID ] ; then
112	DRIVELIST=${DRIVES[0]}
113	else
114	DRIVELIST=${DRIVELIST:1}
115	fi
116
117	echo "Final drive list: $DRIVELIST"
118	LEVEL=1
119	SPARE=0
120
121
122	# Error if detection has failed and fall back
123	if [ ${#DRIVES[@]} == 0 ] ; then
124	echo "No drive suitable for installation found! Reverting to Anaconda defaults."
125
126	cat > /tmp/part-include <<EOF
127	# Clear the Master Boot Record
128	zerombr
129
130	# Clear current partitions
131	clearpart --all --initlabel
132
133	# Automatically create partitions using LVM
134	autopart --lvm --nohome
135	EOF
136
137	# Otherwise clear detected devices and set up bootloader
138	else
139	cat > /tmp/part-include <<EOF
140	# Clear the Master Boot Record
141	zerombr
142
143	# Clear current partitions and install bootloader
144	clearpart --all --drives=$DRIVELIST --initlabel
145	ignoredisk --only-use=$DRIVELIST
146	bootloader --location=mbr --driveorder=$DRIVELIST
147	EOF
148
149	# If single disk or noraid specific then set up partitioning without RAID
150	# NOTE: From this point we're appending to part-include
151	if [ ${#DRIVES[@]} == 1 ] \|\| [ $NORAID ] ; then
152
153	# Include the EFI or biosboot partition if necessary
154	if [ -d /sys/firmware/efi ] ; then
155	printf "part /boot/efi --fstype=efi --size=200 --ondisk=%s\n" "${DRIVES[0]}" >> /tmp/part-include
156	elif [ $BASESIZE -gt 2048000 ] ; then
157	printf "part biosboot --fstype=biosboot --size=1 --ondisk=%s\n" "${DRIVES[0]}" >> /tmp/part-include
158	fi
159
160	# Create boot partition
161	printf "part /boot --fstype=%s --size=500 --label=BOOT --ondisk=%s\n" "$FSTYPE" "${DRIVES[0]}" >> /tmp/part-include
162
163	# Default to LVM unless specified at command line
164	if [ $NOLVM ] ; then
165	cat >> /tmp/part-include <<EOF
166	part / --fstype=$FSTYPE --grow --size=3000 --label=ROOT --ondisk=${DRIVES[0]}
167	part swap --fstype=swap --recommended --label=SWAP --ondisk=${DRIVES[0]}
168	EOF
169	else
170	cat >> /tmp/part-include <<EOF
171	part pv.01 --size=4300 --grow --ondisk=${DRIVES[0]}
172	volgroup main pv.01
173	logvol / --fstype=$FSTYPE --name=root --vgname=main --grow --size=3000
174	logvol swap --fstype=swap --name=swap --vgname=main --recommended
175	EOF
176	fi
177
178	# Otherwise multiple disks - prepare for RAID
179	else
180
181	# Define EFI or biosboot and RAID partitions
182	for i in "${!DRIVES[@]}"; do
183
184	if [ -d /sys/firmware/efi ] ; then
185	printf "part raid.%s0 --size=200 --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
186	elif [ $BASESIZE -gt 2048000 ] ; then
187	printf "part biosboot --fstype=biosboot --size=1 --ondisk=%s\n" "${DRIVES[$i]}" >> /tmp/part-include
188	fi
189	printf "part raid.%s1 --size=500 --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
190
191	# Default to LVM unless specified
192	if [ $NOLVM ] ; then
193	printf "part raid.%s2 --size=3000 --grow --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
194	printf "part raid.%s3 --size=%s --ondisk=%s\n" "$i" "$SWAPSIZE" "${DRIVES[$i]}" >> /tmp/part-include
195	else
196	printf "part raid.%s2 --size=4300 --grow --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
197	fi
198
199	done
200
201	# Compute RAID level
202	# from https://wiki.contribs.org/Raid
203	# 2 Drives - Software RAID 1
204	# 3 Drives - Software RAID 1 + 1 Hot-spare
205	# 4 Drives - Software RAID 6
206	# 5+ Drives - Software RAID 6 + 1 Hot-spare
207
208	if [ ${#DRIVES[@]} == 2 ] ; then
209	LEVEL=1
210	SPARE=0
211	elif [ ${#DRIVES[@]} == 3 ] ; then
212	LEVEL=1
213	SPARE=1
214	elif [ ${#DRIVES[@]} == 4 ] ; then
215	LEVEL=6
216	SPARE=0
217	else
218	LEVEL=6
219	SPARE=1
220	fi
221
222	# Set up RAID devices
223	printf -v EFIDEVS "raid.%s0 " "${!DRIVES[@]}"
224	printf -v BOOTDEVS "raid.%s1 " "${!DRIVES[@]}"
225	printf -v ROOTDEVS "raid.%s2 " "${!DRIVES[@]}"
226	printf -v SWAPDEVS "raid.%s3 " "${!DRIVES[@]}"
227
228	# Include the EFI partition if necessary
229	if [ -d /sys/firmware/efi ] ; then
230	printf "raid /boot/efi --fstype=efi --level=1 --spares=0 --device=md9 %s\n" "$EFIDEVS" >> /tmp/part-include
231	fi
232
233	# Boot partition
234	printf "raid /boot --fstype=%s --level=1 --spares=0 --device=md0 %s\n" "$FSTYPE" "$BOOTDEVS" >> /tmp/part-include
235
236	# Default to LVM unless specified
237	if [ $NOLVM ] ; then
238	cat >> /tmp/part-include <<EOF
239	raid / --fstype=$FSTYPE --level=$LEVEL --spares=$SPARE --device=md1 $ROOTDEVS
240	raid swap --fstype=swap --level=$LEVEL --spares=$SPARE --device=md2 $SWAPDEVS
241	EOF
242	else
243	cat >> /tmp/part-include <<EOF
244	raid pv.01 --level=$LEVEL --spares=$SPARE --device=md1 $ROOTDEVS
245	volgroup main pv.01
246	logvol / --fstype=$FSTYPE --name=root --vgname=main --grow --size=3000
247	logvol swap --fstype swap --name=swap --vgname=main --recommended
248	EOF
249	fi
250	fi
251	fi
252
253	echo "Final part-include output:"
254	cat /tmp/part-include
255
256	%end
257
258
259	# SME events in post-install
260	%post --interpreter=/usr/bin/bash --log=/var/log/ks.post02.log
261	userdel -r installer
262	sleep 2
263	/sbin/e-smith/signal-event post-install
264	sleep 2
265	/sbin/e-smith/db configuration set UnsavedChanges no
266	touch /forcequotacheck
267	%end
268
269
270	%post --nochroot --log=/mnt/sysimage/var/log/ks.post01.log
271	#!/bin/bash
272	sysimage="/mnt/sysimage"
273	cp -r /var/log/sme-partitioning.log ${sysimage}/root/
274	cp -r /tmp/anaconda.log ${sysimage}/root/
275	%end