sme10/netinstall/ks-efi.cfg

# System authorization information
auth --enableshadow --passalgo=sha512

# we do not want Selinux
selinux --disabled

# services to activate
services --disabled=lm_sensors

# default root pass, willbe changed in post-install process anyway
rootpw --lock 

# Accept eula
eula --agreed

# include the partitioning logic from the pre section.
%include /tmp/part-include

# disable kdump
%addon com_redhat_kdump --disable
%end

# added for netinstall
url --url  https://mirror.canada.pialasse.com/releases/testing/10/smeos/x86_64/
repo --name=smeupdates --baseurl=https://mirror.canada.pialasse.com/releases/testing/10/smeupdates/x86_64/
#repo --name=remi-safe --baseurl=http://rpms.famillecollet.com/enterprise/7/safe/x86_64/
#repo --name=smeupdates-testing --baseurl=http://mirror.canada.pialasse.com/releases/testing/10/smeupdates-testing/x86_64/
#firewall --disabled
# /added for netinstall

%pre --interpreter=/bin/bash
# pre section
#----- partitioning logic below--------------
# pick the first drive that is not removable and is over MINSIZE
DIR="/sys/block"

# minimum size of hard drive needed specified in GIGABYTES
MINSIZE=5


# Number of detected drives
NDEV=0

for DEV in $(lsblk -nl | grep disk | cut -d' ' -f1); do
  if [ -d /sys/block/$DEV ]; then
    REMOVABLE=`cat /sys/block/$DEV/removable`
    if (( $REMOVABLE == 0 )); then
      SIZE=`cat /sys/block/$DEV/size`
      GB=$(($SIZE/2**21))
      if [ $GB -gt $MINSIZE ]; then
        DRIVES[$NDEV]=$DEV
        ((NDEV++))
      fi
    fi
  fi
done

# For now keep things simple and just use the first one
# TODO:
# * Create software RAID depending on the number of detected drives
# * Allow non LVM install

ROOTDRIVE=${DRIVES[0]}
if [ $ROOTDRIVE == "" ] ; then
echo "No drive suitable for installation found! Please proceed manually."
# first in case detection fails...
cat << EOF > /tmp/part-include
# Clear the Master Boot Record
zerombr
# System bootloader configuration
clearpart --all  --initlabel
# Automatically create partitions, no LVM
autopart --lvm

EOF

else
cat <<_EOF > /tmp/part-include
zerombr
clearpart --all --drives=$ROOTDRIVE --initlabel
bootloader --boot-drive=$ROOTDRIVE
part /boot/efi --fstype=efi --grow --maxsize=200 --size=20
part /boot --fstype xfs --size=500 --ondisk=$ROOTDRIVE --label=BOOT
part pv.01 --size=4500 --grow --ondisk=$ROOTDRIVE
volgroup main pv.01
logvol / --fstype xfs --name=root --vgname=main --grow --size=3000 --label=ROOT
logvol swap --fstype swap --name=swap --vgname=main --recommended --label=SWAP
_EOF

fi

%end


# packages to install
%packages
@base
@core
-chrony
-kexec-tools
-firewalld
%end


%post  --interpreter=/usr/bin/bash --log=/var/log/ks.post02.log
# before reboot performing post-install
# this is for first alpha iso. we should put this in anaconda
# and / or handle possible upgrade later
/sbin/rsyslogd; 
sleep 2; 
/sbin/e-smith/signal-event post-install; 
sleep 2;
/sbin/e-smith/db configuration set UnsavedChanges no;
touch /forcequotacheck

%end

%post  --nochroot --log=/mnt/sysimage/var/log/ks.post01.log
#!/bin/bash
sysimage="/mnt/sysimage"

cp -r /tmp/anaconda.log ${sysimage}/root/
%end
1	jpp	1.1	# System authorization information
2			auth --enableshadow --passalgo=sha512
3
4			# we do not want Selinux
5			selinux --disabled
6
7			# services to activate
8			services --disabled=lm_sensors
9
10			# default root pass, willbe changed in post-install process anyway
11			rootpw --lock
12
13			# Accept eula
14			eula --agreed
15
16			# include the partitioning logic from the pre section.
17			%include /tmp/part-include
18
19			# disable kdump
20			%addon com_redhat_kdump --disable
21			%end
22
23			# added for netinstall
24			url --url https://mirror.canada.pialasse.com/releases/testing/10/smeos/x86_64/
25			repo --name=smeupdates --baseurl=https://mirror.canada.pialasse.com/releases/testing/10/smeupdates/x86_64/
26			#repo --name=remi-safe --baseurl=http://rpms.famillecollet.com/enterprise/7/safe/x86_64/
27			#repo --name=smeupdates-testing --baseurl=http://mirror.canada.pialasse.com/releases/testing/10/smeupdates-testing/x86_64/
28			#firewall --disabled
29			# /added for netinstall
30
31			%pre --interpreter=/bin/bash
32			# pre section
33			#----- partitioning logic below--------------
34			# pick the first drive that is not removable and is over MINSIZE
35			DIR="/sys/block"
36
37			# minimum size of hard drive needed specified in GIGABYTES
38			MINSIZE=5
39
40
41			# Number of detected drives
42			NDEV=0
43
44			for DEV in $(lsblk -nl \| grep disk \| cut -d' ' -f1); do
45			if [ -d /sys/block/$DEV ]; then
46			REMOVABLE=`cat /sys/block/$DEV/removable`
47			if (( $REMOVABLE == 0 )); then
48			SIZE=`cat /sys/block/$DEV/size`
49			GB=$(($SIZE/2**21))
50			if [ $GB -gt $MINSIZE ]; then
51			DRIVES[$NDEV]=$DEV
52			((NDEV++))
53			fi
54			fi
55			fi
56			done
57
58			# For now keep things simple and just use the first one
59			# TODO:
60			# * Create software RAID depending on the number of detected drives
61			# * Allow non LVM install
62
63			ROOTDRIVE=${DRIVES[0]}
64			if [ $ROOTDRIVE == "" ] ; then
65			echo "No drive suitable for installation found! Please proceed manually."
66			# first in case detection fails...
67			cat << EOF > /tmp/part-include
68			# Clear the Master Boot Record
69			zerombr
70			# System bootloader configuration
71			clearpart --all --initlabel
72			# Automatically create partitions, no LVM
73			autopart --lvm
74
75			EOF
76
77			else
78			cat <<_EOF > /tmp/part-include
79			zerombr
80			clearpart --all --drives=$ROOTDRIVE --initlabel
81			bootloader --boot-drive=$ROOTDRIVE
82			part /boot/efi --fstype=efi --grow --maxsize=200 --size=20
83			part /boot --fstype xfs --size=500 --ondisk=$ROOTDRIVE --label=BOOT
84			part pv.01 --size=4500 --grow --ondisk=$ROOTDRIVE
85			volgroup main pv.01
86			logvol / --fstype xfs --name=root --vgname=main --grow --size=3000 --label=ROOT
87			logvol swap --fstype swap --name=swap --vgname=main --recommended --label=SWAP
88			_EOF
89
90			fi
91
92			%end
93
94
95
96			# packages to install
97			%packages
98			@base
99			@core
100			-chrony
101			-kexec-tools
102			-firewalld
103			%end
104
105
106
107			%post --interpreter=/usr/bin/bash --log=/var/log/ks.post02.log
108			# before reboot performing post-install
109			# this is for first alpha iso. we should put this in anaconda
110			# and / or handle possible upgrade later
111			/sbin/rsyslogd;
112			sleep 2;
113			/sbin/e-smith/signal-event post-install;
114			sleep 2;
115			/sbin/e-smith/db configuration set UnsavedChanges no;
116			touch /forcequotacheck
117
118			%end
119
120			%post --nochroot --log=/mnt/sysimage/var/log/ks.post01.log
121			#!/bin/bash
122			sysimage="/mnt/sysimage"
123
124			cp -r /tmp/anaconda.log ${sysimage}/root/
125			%end