sme10/netinstall/ks.cfg

# System authorization information
auth --enableshadow --passalgo=sha512

# We do not want SELinux
selinux --disabled

# Services to activate
services --disabled=lm_sensors

# Default root pass, will be changed in post-install process anyway
rootpw --lock
user --name=installer --uid=9999

# Accept EULA
eula --agreed

# Partitioning from pre section
%include /tmp/part-include

# Disable kdump
%addon com_redhat_kdump --disable
%end


# Add netinstall repos
url --mirrorlist https://mirrorlist.koozali.org/mirrorlist/smeos-10-x86_64 
repo --name=smeupdates --mirrorlist https://mirrorlist.koozali.org/mirrorlist/smeupdates-10-x86_64
repo --name=remi-safe --baseurl  http://rpms.famillecollet.com/enterprise/7/safe/x86_6/
#url --url http://distro.ibiblio.org/pub/linux/distributions/smeserver/releases/10/smeos/x86_64/
#repo --name=smeupdates --baseurl http://distro.ibiblio.org/pub/linux/distributions/smeserver/releases/10/smeupdates/x86_64/

# Packages to install
# need to unselect to be able to use mirrorlist or anaconda errors before loading repo.
%packages
#@^minimal
#@base
#@core
-chrony
-kexec-tools
%end


# Partitioning in pre-install
%pre --interpreter=/bin/bash --log=/var/log/sme-partitioning.log

# Read command line arguments
if grep nolvm "/proc/cmdline" ; then NOLVM=true ; fi
if grep noraid "/proc/cmdline" ; then NORAID=true ; fi
if grep noxfs "/proc/cmdline" ; then FSTYPE="ext4" ; else FSTYPE="xfs" ; fi 
echo "Command line arguments:"
cat /proc/cmdline

# Minimum size of hard drive needed specified in MB
MINSIZE=5000

# Number of detected drives and first disk size
NDEV=0
BASESIZE=0
SIZEDIFF=0

# Loop through block devices, keep those over MINSIZE and ensure additional drives for RAID are within 100MB of the first
for DEV in $(lsblk -nl | grep disk | cut -d' ' -f1) ; do
  if [ -d /sys/block/$DEV ] ; then
    REMOVABLE=`cat /sys/block/$DEV/removable`
    if (( $REMOVABLE == 0 )) ; then
      SIZE=`cat /sys/block/$DEV/size`
      MB=$(($SIZE/2**11))
      if [ $MB -gt $MINSIZE ] ; then
        if [ $NDEV == 0 ] ; then
          echo "First drive found: $DEV with size $MB MB"
          DRIVES[$NDEV]=$DEV
          BASESIZE=$MB
          ((NDEV++))
        else
          SIZEDIFF=$(($MB-$BASESIZE))
          if [ $SIZEDIFF -gt 100 ] || [ $SIZEDIFF -lt -100 ] ; then
            echo "Drive found but size of $MB MB doesn't match $BASESIZE MB - ignoring"
          else
            echo "Additional drive found: $DEV with size $MB MB"
            DRIVES[$NDEV]=$DEV
            ((NDEV++))
          fi
        fi
      fi
    fi
  fi
done
echo "Total disks found: $NDEV"

# Calculate recommended swap size for RAID + nolvm case
if [ -d /sys/firmware/efi ] ; then
  DISKSPARE=$(($BASESIZE-200-500-3000))
else
  DISKSPARE=$(($BASESIZE-1-500-3000))
fi
MEMSIZE=$(awk '/^MemTotal:/{print $2}' /proc/meminfo)
MEMSIZEMB=$(($MEMSIZE/2**10))

if [ $MEMSIZEMB -lt 2000 ] ; then
  SWAPSIZE=$((2*$MEMSIZEMB))
elif [ $MEMSIZEMB -lt 8000 ] ; then
  SWAPSIZE=$MEMSIZEMB
else
  SWAPSIZE=8000
fi
if [ $SWAPSIZE -gt $DISKSPARE ] ; then SWAPSIZE=$DISKSPARE ; fi

# Declare useful variables
printf -v DRIVELIST ",%s" "${DRIVES[@]}"
if [ $NORAID ] ; then
  DRIVELIST=${DRIVES[0]}
else
  DRIVELIST=${DRIVELIST:1}
fi

echo "Final drive list: $DRIVELIST"
LEVEL=1
SPARE=0


# Error if detection has failed and fall back
if [ ${#DRIVES[@]} == 0 ] ; then
  echo "No drive suitable for installation found! Reverting to Anaconda defaults."

  cat > /tmp/part-include <<EOF
  # Clear the Master Boot Record
  zerombr

  # Clear current partitions
  clearpart --all  --initlabel

  # Automatically create partitions using LVM
  autopart --lvm --nohome
EOF

# Otherwise clear detected devices and set up bootloader
else
  cat > /tmp/part-include <<EOF
  # Clear the Master Boot Record
  zerombr

  # Clear current partitions and install bootloader
  clearpart --all --drives=$DRIVELIST --initlabel
  ignoredisk --only-use=$DRIVELIST
  bootloader --location=mbr --driveorder=$DRIVELIST
EOF

  # If single disk or noraid specific then set up partitioning without RAID
  # NOTE: From this point we're appending to part-include
  if [ ${#DRIVES[@]} == 1 ] || [ $NORAID ] ; then

    # Include the EFI or biosboot partition if necessary
    if [ -d /sys/firmware/efi ] ; then
      printf "part /boot/efi --fstype=efi --size=200 --ondisk=%s\n" "${DRIVES[0]}" >> /tmp/part-include
    elif [ $BASESIZE -gt 2048000 ] ; then
      printf "part biosboot --fstype=biosboot --size=1 --ondisk=%s\n" "${DRIVES[0]}" >> /tmp/part-include
    fi

    # Create boot partition
    printf "part /boot --fstype=%s --size=500  --label=BOOT --ondisk=%s\n" "$FSTYPE" "${DRIVES[0]}" >> /tmp/part-include

    # Default to LVM unless specified at command line
    if [ $NOLVM ] ; then
      cat >> /tmp/part-include <<EOF
      part / --fstype=$FSTYPE --grow --size=3000 --label=ROOT --ondisk=${DRIVES[0]}
      part swap --fstype=swap --recommended --label=SWAP --ondisk=${DRIVES[0]}
EOF
    else
      cat >> /tmp/part-include <<EOF
      part pv.01 --size=4300 --grow --ondisk=${DRIVES[0]}
      volgroup main pv.01
      logvol / --fstype=$FSTYPE --name=root --vgname=main --grow --size=3000
      logvol swap --fstype=swap --name=swap --vgname=main --recommended
EOF
    fi

  # Otherwise multiple disks - prepare for RAID
  else

    # Define EFI or biosboot and RAID partitions
    for i in "${!DRIVES[@]}"; do

      if [ -d /sys/firmware/efi ] ; then
        printf "part raid.%s0 --size=200 --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
      elif [ $BASESIZE -gt 2048000 ] ; then
        printf "part biosboot --fstype=biosboot --size=1 --ondisk=%s\n" "${DRIVES[$i]}" >> /tmp/part-include
      fi
      printf "part raid.%s1 --size=500 --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include

      # Default to LVM unless specified
      if [ $NOLVM ] ; then
        printf "part raid.%s2 --size=3000 --grow --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
        printf "part raid.%s3 --size=%s --ondisk=%s\n" "$i" "$SWAPSIZE" "${DRIVES[$i]}" >> /tmp/part-include
      else
        printf "part raid.%s2 --size=4300 --grow --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
      fi

    done

    # Compute RAID level
    # from https://wiki.contribs.org/Raid
    # 2 Drives - Software RAID 1
    # 3 Drives - Software RAID 1 + 1 Hot-spare
    # 4 Drives - Software RAID 6
    # 5+ Drives - Software RAID 6 + 1 Hot-spare

    if [ ${#DRIVES[@]} == 2 ] ; then
      LEVEL=1
      SPARE=0
    elif [ ${#DRIVES[@]} == 3 ] ; then
      LEVEL=1
      SPARE=1
    elif [ ${#DRIVES[@]} == 4 ] ; then
      LEVEL=6
      SPARE=0
    else
      LEVEL=6
      SPARE=1
    fi

    # Set up RAID devices
    printf -v EFIDEVS "raid.%s0 " "${!DRIVES[@]}"
    printf -v BOOTDEVS "raid.%s1 " "${!DRIVES[@]}"
    printf -v ROOTDEVS "raid.%s2 " "${!DRIVES[@]}"
    printf -v SWAPDEVS "raid.%s3 " "${!DRIVES[@]}"
    
    # Include the EFI partition if necessary
    if [ -d /sys/firmware/efi ] ; then
      printf "raid /boot/efi --fstype=efi --level=1 --spares=0 --device=md9 %s\n" "$EFIDEVS" >> /tmp/part-include
    fi

    # Boot partition
    printf "raid /boot --fstype=%s --level=1 --spares=0 --device=md0 %s\n" "$FSTYPE" "$BOOTDEVS" >> /tmp/part-include

    # Default to LVM unless specified
    if [ $NOLVM ] ; then
      cat >> /tmp/part-include <<EOF
      raid / --fstype=$FSTYPE --level=$LEVEL --spares=$SPARE --device=md1 $ROOTDEVS
      raid swap --fstype=swap --level=$LEVEL --spares=$SPARE --device=md2 $SWAPDEVS
EOF
    else
      cat >> /tmp/part-include <<EOF
      raid pv.01 --level=$LEVEL --spares=$SPARE --device=md1 $ROOTDEVS
      volgroup main pv.01
      logvol / --fstype=$FSTYPE --name=root --vgname=main --grow --size=3000
      logvol swap --fstype swap --name=swap --vgname=main --recommended
EOF
    fi
  fi
fi

echo "Final part-include output:"
cat /tmp/part-include

%end


# SME events in post-install
%post  --interpreter=/usr/bin/bash --log=/var/log/ks.post02.log
userdel -r installer
sleep 2
/sbin/e-smith/signal-event post-install
sleep 2
/sbin/e-smith/db configuration set UnsavedChanges no
touch /forcequotacheck
%end


%post  --nochroot --log=/mnt/sysimage/var/log/ks.post01.log
#!/bin/bash
sysimage="/mnt/sysimage"
cp -r /var/log/sme-partitioning.log ${sysimage}/root/
cp -r /tmp/anaconda.log ${sysimage}/root/
%end
1	jpp	1.1	# System authorization information
2			auth --enableshadow --passalgo=sha512
3
4	chrissn	1.2	# We do not want SELinux
5	jpp	1.1	selinux --disabled
6
7	chrissn	1.2	# Services to activate
8	jpp	1.1	services --disabled=lm_sensors
9
10	chrissn	1.2	# Default root pass, will be changed in post-install process anyway
11			rootpw --lock
12	chrissn	1.4	user --name=installer --uid=9999
13	jpp	1.1
14	chrissn	1.2	# Accept EULA
15	jpp	1.1	eula --agreed
16
17	chrissn	1.2	# Partitioning from pre section
18	jpp	1.1	%include /tmp/part-include
19
20	chrissn	1.2	# Disable kdump
21	jpp	1.1	%addon com_redhat_kdump --disable
22			%end
23
24	chrissn	1.2
25			# Add netinstall repos
26	jpp	1.12	url --mirrorlist https://mirrorlist.koozali.org/mirrorlist/smeos-10-x86_64
27			repo --name=smeupdates --mirrorlist https://mirrorlist.koozali.org/mirrorlist/smeupdates-10-x86_64
28	jpp	1.13	repo --name=remi-safe --baseurl http://rpms.famillecollet.com/enterprise/7/safe/x86_6/
29	jpp	1.12	#url --url http://distro.ibiblio.org/pub/linux/distributions/smeserver/releases/10/smeos/x86_64/
30			#repo --name=smeupdates --baseurl http://distro.ibiblio.org/pub/linux/distributions/smeserver/releases/10/smeupdates/x86_64/
31	jpp	1.1
32	chrissn	1.2	# Packages to install
33	jpp	1.12	# need to unselect to be able to use mirrorlist or anaconda errors before loading repo.
34	chrissn	1.2	%packages
35	jpp	1.12	#@^minimal
36			#@base
37			#@core
38	chrissn	1.2	-chrony
39			-kexec-tools
40			%end
41
42
43			# Partitioning in pre-install
44	chrissn	1.6	%pre --interpreter=/bin/bash --log=/var/log/sme-partitioning.log
45	chrissn	1.2
46	chrissn	1.6	# Read command line arguments
47			if grep nolvm "/proc/cmdline" ; then NOLVM=true ; fi
48			if grep noraid "/proc/cmdline" ; then NORAID=true ; fi
49	chrissn	1.7	if grep noxfs "/proc/cmdline" ; then FSTYPE="ext4" ; else FSTYPE="xfs" ; fi
50	chrissn	1.6	echo "Command line arguments:"
51			cat /proc/cmdline
52	jpp	1.1
53	chrissn	1.6	# Minimum size of hard drive needed specified in MB
54			MINSIZE=5000
55
56			# Number of detected drives and first disk size
57	jpp	1.1	NDEV=0
58	chrissn	1.6	BASESIZE=0
59			SIZEDIFF=0
60	jpp	1.1
61	chrissn	1.6	# Loop through block devices, keep those over MINSIZE and ensure additional drives for RAID are within 100MB of the first
62			for DEV in $(lsblk -nl \| grep disk \| cut -d' ' -f1) ; do
63			if [ -d /sys/block/$DEV ] ; then
64	jpp	1.1	REMOVABLE=`cat /sys/block/$DEV/removable`
65	chrissn	1.6	if (( $REMOVABLE == 0 )) ; then
66	jpp	1.1	SIZE=`cat /sys/block/$DEV/size`
67	chrissn	1.6	MB=$(($SIZE/2**11))
68			if [ $MB -gt $MINSIZE ] ; then
69			if [ $NDEV == 0 ] ; then
70			echo "First drive found: $DEV with size $MB MB"
71			DRIVES[$NDEV]=$DEV
72			BASESIZE=$MB
73			((NDEV++))
74			else
75			SIZEDIFF=$(($MB-$BASESIZE))
76			if [ $SIZEDIFF -gt 100 ] \|\| [ $SIZEDIFF -lt -100 ] ; then
77			echo "Drive found but size of $MB MB doesn't match $BASESIZE MB - ignoring"
78			else
79			echo "Additional drive found: $DEV with size $MB MB"
80			DRIVES[$NDEV]=$DEV
81			((NDEV++))
82			fi
83			fi
84	jpp	1.1	fi
85			fi
86			fi
87			done
88	chrissn	1.6	echo "Total disks found: $NDEV"
89
90			# Calculate recommended swap size for RAID + nolvm case
91			if [ -d /sys/firmware/efi ] ; then
92			DISKSPARE=$(($BASESIZE-200-500-3000))
93			else
94			DISKSPARE=$(($BASESIZE-1-500-3000))
95			fi
96			MEMSIZE=$(awk '/^MemTotal:/{print $2}' /proc/meminfo)
97			MEMSIZEMB=$(($MEMSIZE/2**10))
98
99			if [ $MEMSIZEMB -lt 2000 ] ; then
100			SWAPSIZE=$((2*$MEMSIZEMB))
101			elif [ $MEMSIZEMB -lt 8000 ] ; then
102			SWAPSIZE=$MEMSIZEMB
103			else
104			SWAPSIZE=8000
105			fi
106			if [ $SWAPSIZE -gt $DISKSPARE ] ; then SWAPSIZE=$DISKSPARE ; fi
107	jpp	1.1
108	chrissn	1.2	# Declare useful variables
109			printf -v DRIVELIST ",%s" "${DRIVES[@]}"
110	chrissn	1.6	if [ $NORAID ] ; then
111			DRIVELIST=${DRIVES[0]}
112			else
113			DRIVELIST=${DRIVELIST:1}
114			fi
115
116			echo "Final drive list: $DRIVELIST"
117	chrissn	1.2	LEVEL=1
118			SPARE=0
119
120	chrissn	1.6
121	chrissn	1.2	# Error if detection has failed and fall back
122			if [ ${#DRIVES[@]} == 0 ] ; then
123			echo "No drive suitable for installation found! Reverting to Anaconda defaults."
124
125			cat > /tmp/part-include <<EOF
126			# Clear the Master Boot Record
127			zerombr
128
129			# Clear current partitions
130			clearpart --all --initlabel
131	jpp	1.1
132	chrissn	1.2	# Automatically create partitions using LVM
133			autopart --lvm --nohome
134	jpp	1.1	EOF
135
136	chrissn	1.2	# Otherwise clear detected devices and set up bootloader
137	jpp	1.1	else
138	chrissn	1.2	cat > /tmp/part-include <<EOF
139			# Clear the Master Boot Record
140			zerombr
141
142			# Clear current partitions and install bootloader
143			clearpart --all --drives=$DRIVELIST --initlabel
144			ignoredisk --only-use=$DRIVELIST
145			bootloader --location=mbr --driveorder=$DRIVELIST
146			EOF
147
148	chrissn	1.6	# If single disk or noraid specific then set up partitioning without RAID
149	chrissn	1.2	# NOTE: From this point we're appending to part-include
150	chrissn	1.6	if [ ${#DRIVES[@]} == 1 ] \|\| [ $NORAID ] ; then
151	chrissn	1.2
152	chrissn	1.6	# Include the EFI or biosboot partition if necessary
153	chrissn	1.2	if [ -d /sys/firmware/efi ] ; then
154			printf "part /boot/efi --fstype=efi --size=200 --ondisk=%s\n" "${DRIVES[0]}" >> /tmp/part-include
155	chrissn	1.6	elif [ $BASESIZE -gt 2048000 ] ; then
156			printf "part biosboot --fstype=biosboot --size=1 --ondisk=%s\n" "${DRIVES[0]}" >> /tmp/part-include
157	chrissn	1.2	fi
158	jpp	1.1
159	chrissn	1.6	# Create boot partition
160	chrissn	1.7	printf "part /boot --fstype=%s --size=500 --label=BOOT --ondisk=%s\n" "$FSTYPE" "${DRIVES[0]}" >> /tmp/part-include
161	chrissn	1.6
162			# Default to LVM unless specified at command line
163			if [ $NOLVM ] ; then
164			cat >> /tmp/part-include <<EOF
165	chrissn	1.7	part / --fstype=$FSTYPE --grow --size=3000 --label=ROOT --ondisk=${DRIVES[0]}
166	chrissn	1.6	part swap --fstype=swap --recommended --label=SWAP --ondisk=${DRIVES[0]}
167	chrissn	1.2	EOF
168	chrissn	1.6	else
169			cat >> /tmp/part-include <<EOF
170			part pv.01 --size=4300 --grow --ondisk=${DRIVES[0]}
171			volgroup main pv.01
172	chrissn	1.7	logvol / --fstype=$FSTYPE --name=root --vgname=main --grow --size=3000
173	chrissn	1.6	logvol swap --fstype=swap --name=swap --vgname=main --recommended
174			EOF
175			fi
176	chrissn	1.2
177			# Otherwise multiple disks - prepare for RAID
178			else
179
180	chrissn	1.6	# Define EFI or biosboot and RAID partitions
181	chrissn	1.2	for i in "${!DRIVES[@]}"; do
182	chrissn	1.6
183	chrissn	1.2	if [ -d /sys/firmware/efi ] ; then
184			printf "part raid.%s0 --size=200 --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
185	chrissn	1.6	elif [ $BASESIZE -gt 2048000 ] ; then
186			printf "part biosboot --fstype=biosboot --size=1 --ondisk=%s\n" "${DRIVES[$i]}" >> /tmp/part-include
187	chrissn	1.2	fi
188			printf "part raid.%s1 --size=500 --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
189	chrissn	1.6
190			# Default to LVM unless specified
191			if [ $NOLVM ] ; then
192			printf "part raid.%s2 --size=3000 --grow --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
193			printf "part raid.%s3 --size=%s --ondisk=%s\n" "$i" "$SWAPSIZE" "${DRIVES[$i]}" >> /tmp/part-include
194			else
195			printf "part raid.%s2 --size=4300 --grow --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
196			fi
197
198	chrissn	1.2	done
199
200			# Compute RAID level
201			# from https://wiki.contribs.org/Raid
202			# 2 Drives - Software RAID 1
203			# 3 Drives - Software RAID 1 + 1 Hot-spare
204	chrissn	1.3	# 4 Drives - Software RAID 6
205			# 5+ Drives - Software RAID 6 + 1 Hot-spare
206	chrissn	1.2
207			if [ ${#DRIVES[@]} == 2 ] ; then
208			LEVEL=1
209			SPARE=0
210			elif [ ${#DRIVES[@]} == 3 ] ; then
211			LEVEL=1
212			SPARE=1
213	chrissn	1.3	elif [ ${#DRIVES[@]} == 4 ] ; then
214			LEVEL=6
215			SPARE=0
216	chrissn	1.2	else
217			LEVEL=6
218			SPARE=1
219			fi
220	jpp	1.1
221	chrissn	1.2	# Set up RAID devices
222			printf -v EFIDEVS "raid.%s0 " "${!DRIVES[@]}"
223			printf -v BOOTDEVS "raid.%s1 " "${!DRIVES[@]}"
224			printf -v ROOTDEVS "raid.%s2 " "${!DRIVES[@]}"
225	chrissn	1.6	printf -v SWAPDEVS "raid.%s3 " "${!DRIVES[@]}"
226	chrissn	1.2
227			# Include the EFI partition if necessary
228			if [ -d /sys/firmware/efi ] ; then
229	chrissn	1.3	printf "raid /boot/efi --fstype=efi --level=1 --spares=0 --device=md9 %s\n" "$EFIDEVS" >> /tmp/part-include
230	chrissn	1.2	fi
231	jpp	1.1
232	chrissn	1.6	# Boot partition
233	chrissn	1.7	printf "raid /boot --fstype=%s --level=1 --spares=0 --device=md0 %s\n" "$FSTYPE" "$BOOTDEVS" >> /tmp/part-include
234	jpp	1.1
235	chrissn	1.6	# Default to LVM unless specified
236			if [ $NOLVM ] ; then
237			cat >> /tmp/part-include <<EOF
238	chrissn	1.7	raid / --fstype=$FSTYPE --level=$LEVEL --spares=$SPARE --device=md1 $ROOTDEVS
239	chrissn	1.6	raid swap --fstype=swap --level=$LEVEL --spares=$SPARE --device=md2 $SWAPDEVS
240			EOF
241			else
242			cat >> /tmp/part-include <<EOF
243			raid pv.01 --level=$LEVEL --spares=$SPARE --device=md1 $ROOTDEVS
244			volgroup main pv.01
245	chrissn	1.7	logvol / --fstype=$FSTYPE --name=root --vgname=main --grow --size=3000
246	chrissn	1.6	logvol swap --fstype swap --name=swap --vgname=main --recommended
247	chrissn	1.2	EOF
248	chrissn	1.6	fi
249	chrissn	1.2	fi
250			fi
251	jpp	1.1
252	chrissn	1.6	echo "Final part-include output:"
253			cat /tmp/part-include
254
255	jpp	1.1	%end
256
257
258	chrissn	1.2	# SME events in post-install
259	jpp	1.1	%post --interpreter=/usr/bin/bash --log=/var/log/ks.post02.log
260	chrissn	1.4	userdel -r installer
261			sleep 2
262			/sbin/e-smith/signal-event post-install
263			sleep 2
264			/sbin/e-smith/db configuration set UnsavedChanges no
265	jpp	1.1	touch /forcequotacheck
266	chrissn	1.2	%end
267	jpp	1.1
268
269			%post --nochroot --log=/mnt/sysimage/var/log/ks.post01.log
270			#!/bin/bash
271			sysimage="/mnt/sysimage"
272	chrissn	1.6	cp -r /var/log/sme-partitioning.log ${sysimage}/root/
273	jpp	1.1	cp -r /tmp/anaconda.log ${sysimage}/root/
274			%end