sme10/netinstall/ks.cfg

# System authorization information
auth --enableshadow --passalgo=sha512

# We do not want SELinux
selinux --disabled

# Services to activate
services --disabled=lm_sensors

# Default root pass, will be changed in post-install process anyway
rootpw --lock

# Accept EULA
eula --agreed

# Partitioning from pre section
%include /tmp/part-include

# Disable kdump
%addon com_redhat_kdump --disable
%end


# Add netinstall repos
url --url  https://mirror.canada.pialasse.com/releases/testing/10/smeos/x86_64/
repo --name=smeupdates --baseurl=https://mirror.canada.pialasse.com/releases/testing/10/smeupdates/x86_64/

# Packages to install
%packages
@^minimal
@base
@core
-chrony
-kexec-tools
%end


# Partitioning in pre-install
%pre --interpreter=/bin/bash --log=/var/log/ks.pre01.log

# Minimum size of hard drive needed specified in GB
MINSIZE=5

# Number of detected drives
NDEV=0

# Loop through block devices and keep those over MINSIZE
# TODO: Only pair up drives of the same size
for DEV in $(lsblk -nl | grep disk | cut -d' ' -f1); do
  if [ -d /sys/block/$DEV ]; then
    REMOVABLE=`cat /sys/block/$DEV/removable`
    if (( $REMOVABLE == 0 )); then
      SIZE=`cat /sys/block/$DEV/size`
      GB=$(($SIZE/2**21))
      if [ $GB -gt $MINSIZE ]; then
        DRIVES[$NDEV]=$DEV
        ((NDEV++))
      fi
    fi
  fi
done

# Declare useful variables
printf -v DRIVELIST ",%s" "${DRIVES[@]}"
DRIVELIST=${DRIVELIST:1}
LEVEL=1
SPARE=0

# Error if detection has failed and fall back
if [ ${#DRIVES[@]} == 0 ] ; then
  echo "No drive suitable for installation found! Reverting to Anaconda defaults."

  cat > /tmp/part-include <<EOF
  # Clear the Master Boot Record
  zerombr

  # Clear current partitions
  clearpart --all  --initlabel

  # Automatically create partitions using LVM
  autopart --lvm --nohome
EOF

# Otherwise clear detected devices and set up bootloader
else
  cat > /tmp/part-include <<EOF
  # Clear the Master Boot Record
  zerombr

  # Clear current partitions and install bootloader
  clearpart --all --drives=$DRIVELIST --initlabel
  ignoredisk --only-use=$DRIVELIST
  bootloader --location=mbr --driveorder=$DRIVELIST
EOF

  # If single disk then set up partitioning without RAID
  # NOTE: From this point we're appending to part-include
  if [ ${#DRIVES[@]} == 1 ] ; then

    # Include the EFI partition if necessary
    if [ -d /sys/firmware/efi ] ; then
      printf "part /boot/efi --fstype=efi --size=200 --ondisk=%s\n" "${DRIVES[0]}" >> /tmp/part-include
    fi

    cat >> /tmp/part-include <<EOF
    part /boot --fstype=xfs --size=500 --ondisk=${DRIVES[0]} --label=BOOT
    part pv.01 --size=4300 --grow --ondisk=${DRIVES[0]}
    volgroup main pv.01
    logvol / --fstype=xfs --name=root --vgname=main --grow --size=3000 --label=ROOT
    logvol swap --fstype=swap --name=swap --vgname=main --recommended --label=SWAP
EOF

  # Otherwise multiple disks - prepare for RAID
  else

    # Define EFI, boot and LVM RAID partitions
    for i in "${!DRIVES[@]}"; do
      if [ -d /sys/firmware/efi ] ; then
        printf "part raid.%s0 --size=200 --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
      fi
      printf "part raid.%s1 --size=500 --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
      printf "part raid.%s2 --size=4300 --grow --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
    done

    # Compute RAID level
    # from https://wiki.contribs.org/Raid
    # 2 Drives - Software RAID 1
    # 3 Drives - Software RAID 1 + 1 Hot-spare
    # 4 Drives - Software RAID 6
    # 5+ Drives - Software RAID 6 + 1 Hot-spare

    if [ ${#DRIVES[@]} == 2 ] ; then
      LEVEL=1
      SPARE=0
    elif [ ${#DRIVES[@]} == 3 ] ; then
      LEVEL=1
      SPARE=1
    elif [ ${#DRIVES[@]} == 4 ] ; then
      LEVEL=6
      SPARE=0
    else
      LEVEL=6
      SPARE=1
    fi

    # Set up RAID devices
    printf -v EFIDEVS "raid.%s0 " "${!DRIVES[@]}"
    printf -v BOOTDEVS "raid.%s1 " "${!DRIVES[@]}"
    printf -v ROOTDEVS "raid.%s2 " "${!DRIVES[@]}"
    
    # Include the EFI partition if necessary
    if [ -d /sys/firmware/efi ] ; then
      printf "raid /boot/efi --fstype=efi --level=1 --spares=0 --device=md9 %s\n" "$EFIDEVS" >> /tmp/part-include
    fi

    printf "raid /boot --fstype=xfs --level=1 --spares=0 --device=md0 %s\n" "$BOOTDEVS" >> /tmp/part-include
    printf "raid pv.01 --level=%s --spares=%s --device=md1 %s\n" "$LEVEL" "$SPARE" "$ROOTDEVS" >> /tmp/part-include

    # Set up LVM
    cat >> /tmp/part-include <<EOF
    volgroup main pv.01
    logvol / --fstype xfs --name=root --vgname=main --grow --size=3000 --label=ROOT
    logvol swap --fstype swap --name=swap --vgname=main --recommended --label=SWAP
EOF

  fi
fi

%end


# SME events in post-install
%post  --interpreter=/usr/bin/bash --log=/var/log/ks.post02.log
/sbin/rsyslogd;
sleep 2;
/sbin/e-smith/signal-event post-install;
sleep 2;
/sbin/e-smith/db configuration set UnsavedChanges no;
touch /forcequotacheck
%end


%post  --nochroot --log=/mnt/sysimage/var/log/ks.post01.log
#!/bin/bash
sysimage="/mnt/sysimage"
cp -r /tmp/anaconda.log ${sysimage}/root/
%end
1	jpp	1.1	# System authorization information
2			auth --enableshadow --passalgo=sha512
3
4	chrissn	1.2	# We do not want SELinux
5	jpp	1.1	selinux --disabled
6
7	chrissn	1.2	# Services to activate
8	jpp	1.1	services --disabled=lm_sensors
9
10	chrissn	1.2	# Default root pass, will be changed in post-install process anyway
11			rootpw --lock
12	jpp	1.1
13	chrissn	1.2	# Accept EULA
14	jpp	1.1	eula --agreed
15
16	chrissn	1.2	# Partitioning from pre section
17	jpp	1.1	%include /tmp/part-include
18
19	chrissn	1.2	# Disable kdump
20	jpp	1.1	%addon com_redhat_kdump --disable
21			%end
22
23	chrissn	1.2
24			# Add netinstall repos
25	chrissn	1.3	url --url https://mirror.canada.pialasse.com/releases/testing/10/smeos/x86_64/
26	jpp	1.1	repo --name=smeupdates --baseurl=https://mirror.canada.pialasse.com/releases/testing/10/smeupdates/x86_64/
27
28	chrissn	1.2	# Packages to install
29			%packages
30			@^minimal
31			@base
32			@core
33			-chrony
34			-kexec-tools
35			%end
36
37
38			# Partitioning in pre-install
39			%pre --interpreter=/bin/bash --log=/var/log/ks.pre01.log
40
41			# Minimum size of hard drive needed specified in GB
42	jpp	1.1	MINSIZE=5
43
44			# Number of detected drives
45			NDEV=0
46
47	chrissn	1.2	# Loop through block devices and keep those over MINSIZE
48			# TODO: Only pair up drives of the same size
49	jpp	1.1	for DEV in $(lsblk -nl \| grep disk \| cut -d' ' -f1); do
50			if [ -d /sys/block/$DEV ]; then
51			REMOVABLE=`cat /sys/block/$DEV/removable`
52			if (( $REMOVABLE == 0 )); then
53			SIZE=`cat /sys/block/$DEV/size`
54			GB=$(($SIZE/2**21))
55			if [ $GB -gt $MINSIZE ]; then
56			DRIVES[$NDEV]=$DEV
57			((NDEV++))
58			fi
59			fi
60			fi
61			done
62
63	chrissn	1.2	# Declare useful variables
64			printf -v DRIVELIST ",%s" "${DRIVES[@]}"
65			DRIVELIST=${DRIVELIST:1}
66			LEVEL=1
67			SPARE=0
68
69			# Error if detection has failed and fall back
70			if [ ${#DRIVES[@]} == 0 ] ; then
71			echo "No drive suitable for installation found! Reverting to Anaconda defaults."
72
73			cat > /tmp/part-include <<EOF
74			# Clear the Master Boot Record
75			zerombr
76
77			# Clear current partitions
78			clearpart --all --initlabel
79	jpp	1.1
80	chrissn	1.2	# Automatically create partitions using LVM
81			autopart --lvm --nohome
82	jpp	1.1	EOF
83
84	chrissn	1.2	# Otherwise clear detected devices and set up bootloader
85	jpp	1.1	else
86	chrissn	1.2	cat > /tmp/part-include <<EOF
87			# Clear the Master Boot Record
88			zerombr
89
90			# Clear current partitions and install bootloader
91			clearpart --all --drives=$DRIVELIST --initlabel
92			ignoredisk --only-use=$DRIVELIST
93			bootloader --location=mbr --driveorder=$DRIVELIST
94			EOF
95
96			# If single disk then set up partitioning without RAID
97			# NOTE: From this point we're appending to part-include
98			if [ ${#DRIVES[@]} == 1 ] ; then
99
100			# Include the EFI partition if necessary
101			if [ -d /sys/firmware/efi ] ; then
102			printf "part /boot/efi --fstype=efi --size=200 --ondisk=%s\n" "${DRIVES[0]}" >> /tmp/part-include
103			fi
104	jpp	1.1
105	chrissn	1.2	cat >> /tmp/part-include <<EOF
106			part /boot --fstype=xfs --size=500 --ondisk=${DRIVES[0]} --label=BOOT
107			part pv.01 --size=4300 --grow --ondisk=${DRIVES[0]}
108			volgroup main pv.01
109			logvol / --fstype=xfs --name=root --vgname=main --grow --size=3000 --label=ROOT
110			logvol swap --fstype=swap --name=swap --vgname=main --recommended --label=SWAP
111			EOF
112
113			# Otherwise multiple disks - prepare for RAID
114			else
115
116			# Define EFI, boot and LVM RAID partitions
117			for i in "${!DRIVES[@]}"; do
118			if [ -d /sys/firmware/efi ] ; then
119			printf "part raid.%s0 --size=200 --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
120			fi
121			printf "part raid.%s1 --size=500 --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
122			printf "part raid.%s2 --size=4300 --grow --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
123			done
124
125			# Compute RAID level
126			# from https://wiki.contribs.org/Raid
127			# 2 Drives - Software RAID 1
128			# 3 Drives - Software RAID 1 + 1 Hot-spare
129	chrissn	1.3	# 4 Drives - Software RAID 6
130			# 5+ Drives - Software RAID 6 + 1 Hot-spare
131	chrissn	1.2
132			if [ ${#DRIVES[@]} == 2 ] ; then
133			LEVEL=1
134			SPARE=0
135			elif [ ${#DRIVES[@]} == 3 ] ; then
136			LEVEL=1
137			SPARE=1
138	chrissn	1.3	elif [ ${#DRIVES[@]} == 4 ] ; then
139			LEVEL=6
140			SPARE=0
141	chrissn	1.2	else
142			LEVEL=6
143			SPARE=1
144			fi
145	jpp	1.1
146	chrissn	1.2	# Set up RAID devices
147			printf -v EFIDEVS "raid.%s0 " "${!DRIVES[@]}"
148			printf -v BOOTDEVS "raid.%s1 " "${!DRIVES[@]}"
149			printf -v ROOTDEVS "raid.%s2 " "${!DRIVES[@]}"
150
151			# Include the EFI partition if necessary
152			if [ -d /sys/firmware/efi ] ; then
153	chrissn	1.3	printf "raid /boot/efi --fstype=efi --level=1 --spares=0 --device=md9 %s\n" "$EFIDEVS" >> /tmp/part-include
154	chrissn	1.2	fi
155	jpp	1.1
156	chrissn	1.3	printf "raid /boot --fstype=xfs --level=1 --spares=0 --device=md0 %s\n" "$BOOTDEVS" >> /tmp/part-include
157	chrissn	1.2	printf "raid pv.01 --level=%s --spares=%s --device=md1 %s\n" "$LEVEL" "$SPARE" "$ROOTDEVS" >> /tmp/part-include
158	jpp	1.1
159	chrissn	1.2	# Set up LVM
160			cat >> /tmp/part-include <<EOF
161			volgroup main pv.01
162			logvol / --fstype xfs --name=root --vgname=main --grow --size=3000 --label=ROOT
163			logvol swap --fstype swap --name=swap --vgname=main --recommended --label=SWAP
164			EOF
165
166			fi
167			fi
168	jpp	1.1
169			%end
170
171
172	chrissn	1.2	# SME events in post-install
173	jpp	1.1	%post --interpreter=/usr/bin/bash --log=/var/log/ks.post02.log
174	chrissn	1.2	/sbin/rsyslogd;
175			sleep 2;
176			/sbin/e-smith/signal-event post-install;
177	jpp	1.1	sleep 2;
178			/sbin/e-smith/db configuration set UnsavedChanges no;
179			touch /forcequotacheck
180	chrissn	1.2	%end
181	jpp	1.1
182
183			%post --nochroot --log=/mnt/sysimage/var/log/ks.post01.log
184			#!/bin/bash
185			sysimage="/mnt/sysimage"
186			cp -r /tmp/anaconda.log ${sysimage}/root/
187			%end