sme10/netinstall/ks.cfg

# System authorization information
auth --enableshadow --passalgo=sha512

# We do not want SELinux
selinux --disabled

# Services to activate
services --disabled=lm_sensors

# Default root pass, will be changed in post-install process anyway
rootpw --lock
user --name=installer --uid=9999

# Accept EULA
eula --agreed

# Partitioning from pre section
%include /tmp/part-include

# Disable kdump
%addon com_redhat_kdump --disable
%end


# Add netinstall repos
url --url  https://mirror.canada.pialasse.com/releases/testing/10/smeos/x86_64/
repo --name=smeupdates --baseurl=https://mirror.canada.pialasse.com/releases/testing/10/smeupdates/x86_64/

# Packages to install
%packages
@^minimal
@base
@core
-chrony
-kexec-tools
%end


# Partitioning in pre-install
%pre --interpreter=/bin/bash --log=/var/log/ks.pre01.log

# Minimum size of hard drive needed specified in GB
MINSIZE=5

# Number of detected drives
NDEV=0

# Loop through block devices and keep those over MINSIZE
# TODO: Only pair up drives of the same size
for DEV in $(lsblk -nl | grep disk | cut -d' ' -f1); do
  if [ -d /sys/block/$DEV ]; then
    REMOVABLE=`cat /sys/block/$DEV/removable`
    if (( $REMOVABLE == 0 )); then
      SIZE=`cat /sys/block/$DEV/size`
      GB=$(($SIZE/2**21))
      if [ $GB -gt $MINSIZE ]; then
        DRIVES[$NDEV]=$DEV
        ((NDEV++))
      fi
    fi
  fi
done

# Declare useful variables
printf -v DRIVELIST ",%s" "${DRIVES[@]}"
DRIVELIST=${DRIVELIST:1}
LEVEL=1
SPARE=0

# Error if detection has failed and fall back
if [ ${#DRIVES[@]} == 0 ] ; then
  echo "No drive suitable for installation found! Reverting to Anaconda defaults."

  cat > /tmp/part-include <<EOF
  # Clear the Master Boot Record
  zerombr

  # Clear current partitions
  clearpart --all  --initlabel

  # Automatically create partitions using LVM
  autopart --lvm --nohome
EOF

# Otherwise clear detected devices and set up bootloader
else
  cat > /tmp/part-include <<EOF
  # Clear the Master Boot Record
  zerombr

  # Clear current partitions and install bootloader
  clearpart --all --drives=$DRIVELIST --initlabel
  ignoredisk --only-use=$DRIVELIST
  bootloader --location=mbr --driveorder=$DRIVELIST
EOF

  # If single disk then set up partitioning without RAID
  # NOTE: From this point we're appending to part-include
  if [ ${#DRIVES[@]} == 1 ] ; then

    # Include the EFI partition if necessary
    if [ -d /sys/firmware/efi ] ; then
      printf "part /boot/efi --fstype=efi --size=200 --ondisk=%s\n" "${DRIVES[0]}" >> /tmp/part-include
    fi

    cat >> /tmp/part-include <<EOF
    part /boot --fstype=xfs --size=500 --ondisk=${DRIVES[0]} --label=BOOT
    part pv.01 --size=4300 --grow --ondisk=${DRIVES[0]}
    volgroup main pv.01
    logvol / --fstype=xfs --name=root --vgname=main --grow --size=3000 --label=ROOT
    logvol swap --fstype=swap --name=swap --vgname=main --recommended --label=SWAP
EOF

  # Otherwise multiple disks - prepare for RAID
  else

    # Define EFI, boot and LVM RAID partitions
    for i in "${!DRIVES[@]}"; do
      if [ -d /sys/firmware/efi ] ; then
        printf "part raid.%s0 --size=200 --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
      fi
      printf "part raid.%s1 --size=500 --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
      printf "part raid.%s2 --size=4300 --grow --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
    done

    # Compute RAID level
    # from https://wiki.contribs.org/Raid
    # 2 Drives - Software RAID 1
    # 3 Drives - Software RAID 1 + 1 Hot-spare
    # 4 Drives - Software RAID 6
    # 5+ Drives - Software RAID 6 + 1 Hot-spare

    if [ ${#DRIVES[@]} == 2 ] ; then
      LEVEL=1
      SPARE=0
    elif [ ${#DRIVES[@]} == 3 ] ; then
      LEVEL=1
      SPARE=1
    elif [ ${#DRIVES[@]} == 4 ] ; then
      LEVEL=6
      SPARE=0
    else
      LEVEL=6
      SPARE=1
    fi

    # Set up RAID devices
    printf -v EFIDEVS "raid.%s0 " "${!DRIVES[@]}"
    printf -v BOOTDEVS "raid.%s1 " "${!DRIVES[@]}"
    printf -v ROOTDEVS "raid.%s2 " "${!DRIVES[@]}"
    
    # Include the EFI partition if necessary
    if [ -d /sys/firmware/efi ] ; then
      printf "raid /boot/efi --fstype=efi --level=1 --spares=0 --device=md9 %s\n" "$EFIDEVS" >> /tmp/part-include
    fi

    printf "raid /boot --fstype=xfs --level=1 --spares=0 --device=md0 %s\n" "$BOOTDEVS" >> /tmp/part-include
    printf "raid pv.01 --level=%s --spares=%s --device=md1 %s\n" "$LEVEL" "$SPARE" "$ROOTDEVS" >> /tmp/part-include

    # Set up LVM
    cat >> /tmp/part-include <<EOF
    volgroup main pv.01
    logvol / --fstype xfs --name=root --vgname=main --grow --size=3000 --label=ROOT
    logvol swap --fstype swap --name=swap --vgname=main --recommended --label=SWAP
EOF

  fi
fi

%end


# SME events in post-install
%post  --interpreter=/usr/bin/bash --log=/var/log/ks.post02.log
userdel -r installer
sleep 2
/sbin/e-smith/signal-event post-install
sleep 2
/sbin/e-smith/db configuration set UnsavedChanges no
touch /forcequotacheck
%end


%post  --nochroot --log=/mnt/sysimage/var/log/ks.post01.log
#!/bin/bash
sysimage="/mnt/sysimage"
cp -r /tmp/anaconda.log ${sysimage}/root/
%end
1	jpp	1.1	# System authorization information
2			auth --enableshadow --passalgo=sha512
3
4	chrissn	1.2	# We do not want SELinux
5	jpp	1.1	selinux --disabled
6
7	chrissn	1.2	# Services to activate
8	jpp	1.1	services --disabled=lm_sensors
9
10	chrissn	1.2	# Default root pass, will be changed in post-install process anyway
11			rootpw --lock
12	chrissn	1.4	user --name=installer --uid=9999
13	jpp	1.1
14	chrissn	1.2	# Accept EULA
15	jpp	1.1	eula --agreed
16
17	chrissn	1.2	# Partitioning from pre section
18	jpp	1.1	%include /tmp/part-include
19
20	chrissn	1.2	# Disable kdump
21	jpp	1.1	%addon com_redhat_kdump --disable
22			%end
23
24	chrissn	1.2
25			# Add netinstall repos
26	chrissn	1.3	url --url https://mirror.canada.pialasse.com/releases/testing/10/smeos/x86_64/
27	jpp	1.1	repo --name=smeupdates --baseurl=https://mirror.canada.pialasse.com/releases/testing/10/smeupdates/x86_64/
28
29	chrissn	1.2	# Packages to install
30			%packages
31			@^minimal
32			@base
33			@core
34			-chrony
35			-kexec-tools
36			%end
37
38
39			# Partitioning in pre-install
40			%pre --interpreter=/bin/bash --log=/var/log/ks.pre01.log
41
42			# Minimum size of hard drive needed specified in GB
43	jpp	1.1	MINSIZE=5
44
45			# Number of detected drives
46			NDEV=0
47
48	chrissn	1.2	# Loop through block devices and keep those over MINSIZE
49			# TODO: Only pair up drives of the same size
50	jpp	1.1	for DEV in $(lsblk -nl \| grep disk \| cut -d' ' -f1); do
51			if [ -d /sys/block/$DEV ]; then
52			REMOVABLE=`cat /sys/block/$DEV/removable`
53			if (( $REMOVABLE == 0 )); then
54			SIZE=`cat /sys/block/$DEV/size`
55			GB=$(($SIZE/2**21))
56			if [ $GB -gt $MINSIZE ]; then
57			DRIVES[$NDEV]=$DEV
58			((NDEV++))
59			fi
60			fi
61			fi
62			done
63
64	chrissn	1.2	# Declare useful variables
65			printf -v DRIVELIST ",%s" "${DRIVES[@]}"
66			DRIVELIST=${DRIVELIST:1}
67			LEVEL=1
68			SPARE=0
69
70			# Error if detection has failed and fall back
71			if [ ${#DRIVES[@]} == 0 ] ; then
72			echo "No drive suitable for installation found! Reverting to Anaconda defaults."
73
74			cat > /tmp/part-include <<EOF
75			# Clear the Master Boot Record
76			zerombr
77
78			# Clear current partitions
79			clearpart --all --initlabel
80	jpp	1.1
81	chrissn	1.2	# Automatically create partitions using LVM
82			autopart --lvm --nohome
83	jpp	1.1	EOF
84
85	chrissn	1.2	# Otherwise clear detected devices and set up bootloader
86	jpp	1.1	else
87	chrissn	1.2	cat > /tmp/part-include <<EOF
88			# Clear the Master Boot Record
89			zerombr
90
91			# Clear current partitions and install bootloader
92			clearpart --all --drives=$DRIVELIST --initlabel
93			ignoredisk --only-use=$DRIVELIST
94			bootloader --location=mbr --driveorder=$DRIVELIST
95			EOF
96
97			# If single disk then set up partitioning without RAID
98			# NOTE: From this point we're appending to part-include
99			if [ ${#DRIVES[@]} == 1 ] ; then
100
101			# Include the EFI partition if necessary
102			if [ -d /sys/firmware/efi ] ; then
103			printf "part /boot/efi --fstype=efi --size=200 --ondisk=%s\n" "${DRIVES[0]}" >> /tmp/part-include
104			fi
105	jpp	1.1
106	chrissn	1.2	cat >> /tmp/part-include <<EOF
107			part /boot --fstype=xfs --size=500 --ondisk=${DRIVES[0]} --label=BOOT
108			part pv.01 --size=4300 --grow --ondisk=${DRIVES[0]}
109			volgroup main pv.01
110			logvol / --fstype=xfs --name=root --vgname=main --grow --size=3000 --label=ROOT
111			logvol swap --fstype=swap --name=swap --vgname=main --recommended --label=SWAP
112			EOF
113
114			# Otherwise multiple disks - prepare for RAID
115			else
116
117			# Define EFI, boot and LVM RAID partitions
118			for i in "${!DRIVES[@]}"; do
119			if [ -d /sys/firmware/efi ] ; then
120			printf "part raid.%s0 --size=200 --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
121			fi
122			printf "part raid.%s1 --size=500 --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
123			printf "part raid.%s2 --size=4300 --grow --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
124			done
125
126			# Compute RAID level
127			# from https://wiki.contribs.org/Raid
128			# 2 Drives - Software RAID 1
129			# 3 Drives - Software RAID 1 + 1 Hot-spare
130	chrissn	1.3	# 4 Drives - Software RAID 6
131			# 5+ Drives - Software RAID 6 + 1 Hot-spare
132	chrissn	1.2
133			if [ ${#DRIVES[@]} == 2 ] ; then
134			LEVEL=1
135			SPARE=0
136			elif [ ${#DRIVES[@]} == 3 ] ; then
137			LEVEL=1
138			SPARE=1
139	chrissn	1.3	elif [ ${#DRIVES[@]} == 4 ] ; then
140			LEVEL=6
141			SPARE=0
142	chrissn	1.2	else
143			LEVEL=6
144			SPARE=1
145			fi
146	jpp	1.1
147	chrissn	1.2	# Set up RAID devices
148			printf -v EFIDEVS "raid.%s0 " "${!DRIVES[@]}"
149			printf -v BOOTDEVS "raid.%s1 " "${!DRIVES[@]}"
150			printf -v ROOTDEVS "raid.%s2 " "${!DRIVES[@]}"
151
152			# Include the EFI partition if necessary
153			if [ -d /sys/firmware/efi ] ; then
154	chrissn	1.3	printf "raid /boot/efi --fstype=efi --level=1 --spares=0 --device=md9 %s\n" "$EFIDEVS" >> /tmp/part-include
155	chrissn	1.2	fi
156	jpp	1.1
157	chrissn	1.3	printf "raid /boot --fstype=xfs --level=1 --spares=0 --device=md0 %s\n" "$BOOTDEVS" >> /tmp/part-include
158	chrissn	1.2	printf "raid pv.01 --level=%s --spares=%s --device=md1 %s\n" "$LEVEL" "$SPARE" "$ROOTDEVS" >> /tmp/part-include
159	jpp	1.1
160	chrissn	1.2	# Set up LVM
161			cat >> /tmp/part-include <<EOF
162			volgroup main pv.01
163			logvol / --fstype xfs --name=root --vgname=main --grow --size=3000 --label=ROOT
164			logvol swap --fstype swap --name=swap --vgname=main --recommended --label=SWAP
165			EOF
166
167			fi
168			fi
169	jpp	1.1
170			%end
171
172
173	chrissn	1.2	# SME events in post-install
174	jpp	1.1	%post --interpreter=/usr/bin/bash --log=/var/log/ks.post02.log
175	chrissn	1.4	userdel -r installer
176			sleep 2
177			/sbin/e-smith/signal-event post-install
178			sleep 2
179			/sbin/e-smith/db configuration set UnsavedChanges no
180	jpp	1.1	touch /forcequotacheck
181	chrissn	1.2	%end
182	jpp	1.1
183
184			%post --nochroot --log=/mnt/sysimage/var/log/ks.post01.log
185			#!/bin/bash
186			sysimage="/mnt/sysimage"
187			cp -r /tmp/anaconda.log ${sysimage}/root/
188			%end