sme10/netinstall/ks.cfg

# System authorization information
auth --enableshadow --passalgo=sha512

# We do not want SELinux
selinux --disabled

# Services to activate
services --disabled=lm_sensors

# Default root pass, will be changed in post-install process anyway
rootpw --lock
user --name=installer --uid=9999

# Accept EULA
eula --agreed

# Partitioning from pre section
%include /tmp/part-include

# Disable kdump
%addon com_redhat_kdump --disable
%end


# Add netinstall repos
url --url  https://mirror.canada.pialasse.com/releases/testing/10/smeos/x86_64/
repo --name=smeupdates --baseurl=https://mirror.canada.pialasse.com/releases/testing/10/smeupdates/x86_64/

# Packages to install
%packages
@^minimal
@base
@core
-chrony
-kexec-tools
%end


# Partitioning in pre-install
%pre --interpreter=/bin/bash --log=/var/log/sme-partitioning.log

# Read command line arguments
if grep nolvm "/proc/cmdline" ; then NOLVM=true ; fi
if grep noraid "/proc/cmdline" ; then NORAID=true ; fi
echo "Command line arguments:"
cat /proc/cmdline

# Minimum size of hard drive needed specified in MB
MINSIZE=5000

# Number of detected drives and first disk size
NDEV=0
BASESIZE=0
SIZEDIFF=0

# Loop through block devices, keep those over MINSIZE and ensure additional drives for RAID are within 100MB of the first
for DEV in $(lsblk -nl | grep disk | cut -d' ' -f1) ; do
  if [ -d /sys/block/$DEV ] ; then
    REMOVABLE=`cat /sys/block/$DEV/removable`
    if (( $REMOVABLE == 0 )) ; then
      SIZE=`cat /sys/block/$DEV/size`
      MB=$(($SIZE/2**11))
      if [ $MB -gt $MINSIZE ] ; then
        if [ $NDEV == 0 ] ; then
          echo "First drive found: $DEV with size $MB MB"
          DRIVES[$NDEV]=$DEV
          BASESIZE=$MB
          ((NDEV++))
        else
          SIZEDIFF=$(($MB-$BASESIZE))
          if [ $SIZEDIFF -gt 100 ] || [ $SIZEDIFF -lt -100 ] ; then
            echo "Drive found but size of $MB MB doesn't match $BASESIZE MB - ignoring"
          else
            echo "Additional drive found: $DEV with size $MB MB"
            DRIVES[$NDEV]=$DEV
            ((NDEV++))
          fi
        fi
      fi
    fi
  fi
done
echo "Total disks found: $NDEV"

# Calculate recommended swap size for RAID + nolvm case
if [ -d /sys/firmware/efi ] ; then
  DISKSPARE=$(($BASESIZE-200-500-3000))
else
  DISKSPARE=$(($BASESIZE-1-500-3000))
fi
MEMSIZE=$(awk '/^MemTotal:/{print $2}' /proc/meminfo)
MEMSIZEMB=$(($MEMSIZE/2**10))

if [ $MEMSIZEMB -lt 2000 ] ; then
  SWAPSIZE=$((2*$MEMSIZEMB))
elif [ $MEMSIZEMB -lt 8000 ] ; then
  SWAPSIZE=$MEMSIZEMB
else
  SWAPSIZE=8000
fi
if [ $SWAPSIZE -gt $DISKSPARE ] ; then SWAPSIZE=$DISKSPARE ; fi

# Declare useful variables
printf -v DRIVELIST ",%s" "${DRIVES[@]}"
if [ $NORAID ] ; then
  DRIVELIST=${DRIVES[0]}
else
  DRIVELIST=${DRIVELIST:1}
fi

echo "Final drive list: $DRIVELIST"
LEVEL=1
SPARE=0


# Error if detection has failed and fall back
if [ ${#DRIVES[@]} == 0 ] ; then
  echo "No drive suitable for installation found! Reverting to Anaconda defaults."

  cat > /tmp/part-include <<EOF
  # Clear the Master Boot Record
  zerombr

  # Clear current partitions
  clearpart --all  --initlabel

  # Automatically create partitions using LVM
  autopart --lvm --nohome
EOF

# Otherwise clear detected devices and set up bootloader
else
  cat > /tmp/part-include <<EOF
  # Clear the Master Boot Record
  zerombr

  # Clear current partitions and install bootloader
  clearpart --all --drives=$DRIVELIST --initlabel
  ignoredisk --only-use=$DRIVELIST
  bootloader --location=mbr --driveorder=$DRIVELIST
EOF

  # If single disk or noraid specific then set up partitioning without RAID
  # NOTE: From this point we're appending to part-include
  if [ ${#DRIVES[@]} == 1 ] || [ $NORAID ] ; then

    # Include the EFI or biosboot partition if necessary
    if [ -d /sys/firmware/efi ] ; then
      printf "part /boot/efi --fstype=efi --size=200 --ondisk=%s\n" "${DRIVES[0]}" >> /tmp/part-include
    elif [ $BASESIZE -gt 2048000 ] ; then
      printf "part biosboot --fstype=biosboot --size=1 --ondisk=%s\n" "${DRIVES[0]}" >> /tmp/part-include
    fi

    # Create boot partition
    printf "part /boot --fstype=xfs --size=500  --label=BOOT --ondisk=%s\n" "${DRIVES[0]}" >> /tmp/part-include

    # Default to LVM unless specified at command line
    if [ $NOLVM ] ; then
      cat >> /tmp/part-include <<EOF
      part / --fstype=xfs --grow --size=3000 --label=ROOT --ondisk=${DRIVES[0]}
      part swap --fstype=swap --recommended --label=SWAP --ondisk=${DRIVES[0]}
EOF
    else
      cat >> /tmp/part-include <<EOF
      part pv.01 --size=4300 --grow --ondisk=${DRIVES[0]}
      volgroup main pv.01
      logvol / --fstype=xfs --name=root --vgname=main --grow --size=3000
      logvol swap --fstype=swap --name=swap --vgname=main --recommended
EOF
    fi

  # Otherwise multiple disks - prepare for RAID
  else

    # Define EFI or biosboot and RAID partitions
    for i in "${!DRIVES[@]}"; do

      if [ -d /sys/firmware/efi ] ; then
        printf "part raid.%s0 --size=200 --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
      elif [ $BASESIZE -gt 2048000 ] ; then
        printf "part biosboot --fstype=biosboot --size=1 --ondisk=%s\n" "${DRIVES[$i]}" >> /tmp/part-include
      fi
      printf "part raid.%s1 --size=500 --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include

      # Default to LVM unless specified
      if [ $NOLVM ] ; then
        printf "part raid.%s2 --size=3000 --grow --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
        printf "part raid.%s3 --size=%s --ondisk=%s\n" "$i" "$SWAPSIZE" "${DRIVES[$i]}" >> /tmp/part-include
      else
        printf "part raid.%s2 --size=4300 --grow --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
      fi

    done

    # Compute RAID level
    # from https://wiki.contribs.org/Raid
    # 2 Drives - Software RAID 1
    # 3 Drives - Software RAID 1 + 1 Hot-spare
    # 4 Drives - Software RAID 6
    # 5+ Drives - Software RAID 6 + 1 Hot-spare

    if [ ${#DRIVES[@]} == 2 ] ; then
      LEVEL=1
      SPARE=0
    elif [ ${#DRIVES[@]} == 3 ] ; then
      LEVEL=1
      SPARE=1
    elif [ ${#DRIVES[@]} == 4 ] ; then
      LEVEL=6
      SPARE=0
    else
      LEVEL=6
      SPARE=1
    fi

    # Set up RAID devices
    printf -v EFIDEVS "raid.%s0 " "${!DRIVES[@]}"
    printf -v BOOTDEVS "raid.%s1 " "${!DRIVES[@]}"
    printf -v ROOTDEVS "raid.%s2 " "${!DRIVES[@]}"
    printf -v SWAPDEVS "raid.%s3 " "${!DRIVES[@]}"
    
    # Include the EFI partition if necessary
    if [ -d /sys/firmware/efi ] ; then
      printf "raid /boot/efi --fstype=efi --level=1 --spares=0 --device=md9 %s\n" "$EFIDEVS" >> /tmp/part-include
    fi

    # Boot partition
    printf "raid /boot --fstype=xfs --level=1 --spares=0 --device=md0 %s\n" "$BOOTDEVS" >> /tmp/part-include

    # Default to LVM unless specified
    if [ $NOLVM ] ; then
      cat >> /tmp/part-include <<EOF
      raid / --fstype=xfs --level=$LEVEL --spares=$SPARE --device=md1 $ROOTDEVS
      raid swap --fstype=swap --level=$LEVEL --spares=$SPARE --device=md2 $SWAPDEVS
EOF
    else
      cat >> /tmp/part-include <<EOF
      raid pv.01 --level=$LEVEL --spares=$SPARE --device=md1 $ROOTDEVS
      volgroup main pv.01
      logvol / --fstype xfs --name=root --vgname=main --grow --size=3000
      logvol swap --fstype swap --name=swap --vgname=main --recommended
EOF
    fi
  fi
fi

echo "Final part-include output:"
cat /tmp/part-include

%end


# SME events in post-install
%post  --interpreter=/usr/bin/bash --log=/var/log/ks.post02.log
userdel -r installer
sleep 2
/sbin/e-smith/signal-event post-install
sleep 2
/sbin/e-smith/db configuration set UnsavedChanges no
touch /forcequotacheck
%end


%post  --nochroot --log=/mnt/sysimage/var/log/ks.post01.log
#!/bin/bash
sysimage="/mnt/sysimage"
cp -r /var/log/sme-partitioning.log ${sysimage}/root/
cp -r /tmp/anaconda.log ${sysimage}/root/
%end
1	jpp	1.1	# System authorization information
2			auth --enableshadow --passalgo=sha512
3
4	chrissn	1.2	# We do not want SELinux
5	jpp	1.1	selinux --disabled
6
7	chrissn	1.2	# Services to activate
8	jpp	1.1	services --disabled=lm_sensors
9
10	chrissn	1.2	# Default root pass, will be changed in post-install process anyway
11			rootpw --lock
12	chrissn	1.4	user --name=installer --uid=9999
13	jpp	1.1
14	chrissn	1.2	# Accept EULA
15	jpp	1.1	eula --agreed
16
17	chrissn	1.2	# Partitioning from pre section
18	jpp	1.1	%include /tmp/part-include
19
20	chrissn	1.2	# Disable kdump
21	jpp	1.1	%addon com_redhat_kdump --disable
22			%end
23
24	chrissn	1.2
25			# Add netinstall repos
26	chrissn	1.3	url --url https://mirror.canada.pialasse.com/releases/testing/10/smeos/x86_64/
27	jpp	1.1	repo --name=smeupdates --baseurl=https://mirror.canada.pialasse.com/releases/testing/10/smeupdates/x86_64/
28
29	chrissn	1.2	# Packages to install
30			%packages
31			@^minimal
32			@base
33			@core
34			-chrony
35			-kexec-tools
36			%end
37
38
39			# Partitioning in pre-install
40	chrissn	1.6	%pre --interpreter=/bin/bash --log=/var/log/sme-partitioning.log
41	chrissn	1.2
42	chrissn	1.6	# Read command line arguments
43			if grep nolvm "/proc/cmdline" ; then NOLVM=true ; fi
44			if grep noraid "/proc/cmdline" ; then NORAID=true ; fi
45			echo "Command line arguments:"
46			cat /proc/cmdline
47	jpp	1.1
48	chrissn	1.6	# Minimum size of hard drive needed specified in MB
49			MINSIZE=5000
50
51			# Number of detected drives and first disk size
52	jpp	1.1	NDEV=0
53	chrissn	1.6	BASESIZE=0
54			SIZEDIFF=0
55	jpp	1.1
56	chrissn	1.6	# Loop through block devices, keep those over MINSIZE and ensure additional drives for RAID are within 100MB of the first
57			for DEV in $(lsblk -nl \| grep disk \| cut -d' ' -f1) ; do
58			if [ -d /sys/block/$DEV ] ; then
59	jpp	1.1	REMOVABLE=`cat /sys/block/$DEV/removable`
60	chrissn	1.6	if (( $REMOVABLE == 0 )) ; then
61	jpp	1.1	SIZE=`cat /sys/block/$DEV/size`
62	chrissn	1.6	MB=$(($SIZE/2**11))
63			if [ $MB -gt $MINSIZE ] ; then
64			if [ $NDEV == 0 ] ; then
65			echo "First drive found: $DEV with size $MB MB"
66			DRIVES[$NDEV]=$DEV
67			BASESIZE=$MB
68			((NDEV++))
69			else
70			SIZEDIFF=$(($MB-$BASESIZE))
71			if [ $SIZEDIFF -gt 100 ] \|\| [ $SIZEDIFF -lt -100 ] ; then
72			echo "Drive found but size of $MB MB doesn't match $BASESIZE MB - ignoring"
73			else
74			echo "Additional drive found: $DEV with size $MB MB"
75			DRIVES[$NDEV]=$DEV
76			((NDEV++))
77			fi
78			fi
79	jpp	1.1	fi
80			fi
81			fi
82			done
83	chrissn	1.6	echo "Total disks found: $NDEV"
84
85			# Calculate recommended swap size for RAID + nolvm case
86			if [ -d /sys/firmware/efi ] ; then
87			DISKSPARE=$(($BASESIZE-200-500-3000))
88			else
89			DISKSPARE=$(($BASESIZE-1-500-3000))
90			fi
91			MEMSIZE=$(awk '/^MemTotal:/{print $2}' /proc/meminfo)
92			MEMSIZEMB=$(($MEMSIZE/2**10))
93
94			if [ $MEMSIZEMB -lt 2000 ] ; then
95			SWAPSIZE=$((2*$MEMSIZEMB))
96			elif [ $MEMSIZEMB -lt 8000 ] ; then
97			SWAPSIZE=$MEMSIZEMB
98			else
99			SWAPSIZE=8000
100			fi
101			if [ $SWAPSIZE -gt $DISKSPARE ] ; then SWAPSIZE=$DISKSPARE ; fi
102	jpp	1.1
103	chrissn	1.2	# Declare useful variables
104			printf -v DRIVELIST ",%s" "${DRIVES[@]}"
105	chrissn	1.6	if [ $NORAID ] ; then
106			DRIVELIST=${DRIVES[0]}
107			else
108			DRIVELIST=${DRIVELIST:1}
109			fi
110
111			echo "Final drive list: $DRIVELIST"
112	chrissn	1.2	LEVEL=1
113			SPARE=0
114
115	chrissn	1.6
116	chrissn	1.2	# Error if detection has failed and fall back
117			if [ ${#DRIVES[@]} == 0 ] ; then
118			echo "No drive suitable for installation found! Reverting to Anaconda defaults."
119
120			cat > /tmp/part-include <<EOF
121			# Clear the Master Boot Record
122			zerombr
123
124			# Clear current partitions
125			clearpart --all --initlabel
126	jpp	1.1
127	chrissn	1.2	# Automatically create partitions using LVM
128			autopart --lvm --nohome
129	jpp	1.1	EOF
130
131	chrissn	1.2	# Otherwise clear detected devices and set up bootloader
132	jpp	1.1	else
133	chrissn	1.2	cat > /tmp/part-include <<EOF
134			# Clear the Master Boot Record
135			zerombr
136
137			# Clear current partitions and install bootloader
138			clearpart --all --drives=$DRIVELIST --initlabel
139			ignoredisk --only-use=$DRIVELIST
140			bootloader --location=mbr --driveorder=$DRIVELIST
141			EOF
142
143	chrissn	1.6	# If single disk or noraid specific then set up partitioning without RAID
144	chrissn	1.2	# NOTE: From this point we're appending to part-include
145	chrissn	1.6	if [ ${#DRIVES[@]} == 1 ] \|\| [ $NORAID ] ; then
146	chrissn	1.2
147	chrissn	1.6	# Include the EFI or biosboot partition if necessary
148	chrissn	1.2	if [ -d /sys/firmware/efi ] ; then
149			printf "part /boot/efi --fstype=efi --size=200 --ondisk=%s\n" "${DRIVES[0]}" >> /tmp/part-include
150	chrissn	1.6	elif [ $BASESIZE -gt 2048000 ] ; then
151			printf "part biosboot --fstype=biosboot --size=1 --ondisk=%s\n" "${DRIVES[0]}" >> /tmp/part-include
152	chrissn	1.2	fi
153	jpp	1.1
154	chrissn	1.6	# Create boot partition
155			printf "part /boot --fstype=xfs --size=500 --label=BOOT --ondisk=%s\n" "${DRIVES[0]}" >> /tmp/part-include
156
157			# Default to LVM unless specified at command line
158			if [ $NOLVM ] ; then
159			cat >> /tmp/part-include <<EOF
160			part / --fstype=xfs --grow --size=3000 --label=ROOT --ondisk=${DRIVES[0]}
161			part swap --fstype=swap --recommended --label=SWAP --ondisk=${DRIVES[0]}
162	chrissn	1.2	EOF
163	chrissn	1.6	else
164			cat >> /tmp/part-include <<EOF
165			part pv.01 --size=4300 --grow --ondisk=${DRIVES[0]}
166			volgroup main pv.01
167			logvol / --fstype=xfs --name=root --vgname=main --grow --size=3000
168			logvol swap --fstype=swap --name=swap --vgname=main --recommended
169			EOF
170			fi
171	chrissn	1.2
172			# Otherwise multiple disks - prepare for RAID
173			else
174
175	chrissn	1.6	# Define EFI or biosboot and RAID partitions
176	chrissn	1.2	for i in "${!DRIVES[@]}"; do
177	chrissn	1.6
178	chrissn	1.2	if [ -d /sys/firmware/efi ] ; then
179			printf "part raid.%s0 --size=200 --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
180	chrissn	1.6	elif [ $BASESIZE -gt 2048000 ] ; then
181			printf "part biosboot --fstype=biosboot --size=1 --ondisk=%s\n" "${DRIVES[$i]}" >> /tmp/part-include
182	chrissn	1.2	fi
183			printf "part raid.%s1 --size=500 --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
184	chrissn	1.6
185			# Default to LVM unless specified
186			if [ $NOLVM ] ; then
187			printf "part raid.%s2 --size=3000 --grow --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
188			printf "part raid.%s3 --size=%s --ondisk=%s\n" "$i" "$SWAPSIZE" "${DRIVES[$i]}" >> /tmp/part-include
189			else
190			printf "part raid.%s2 --size=4300 --grow --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
191			fi
192
193	chrissn	1.2	done
194
195			# Compute RAID level
196			# from https://wiki.contribs.org/Raid
197			# 2 Drives - Software RAID 1
198			# 3 Drives - Software RAID 1 + 1 Hot-spare
199	chrissn	1.3	# 4 Drives - Software RAID 6
200			# 5+ Drives - Software RAID 6 + 1 Hot-spare
201	chrissn	1.2
202			if [ ${#DRIVES[@]} == 2 ] ; then
203			LEVEL=1
204			SPARE=0
205			elif [ ${#DRIVES[@]} == 3 ] ; then
206			LEVEL=1
207			SPARE=1
208	chrissn	1.3	elif [ ${#DRIVES[@]} == 4 ] ; then
209			LEVEL=6
210			SPARE=0
211	chrissn	1.2	else
212			LEVEL=6
213			SPARE=1
214			fi
215	jpp	1.1
216	chrissn	1.2	# Set up RAID devices
217			printf -v EFIDEVS "raid.%s0 " "${!DRIVES[@]}"
218			printf -v BOOTDEVS "raid.%s1 " "${!DRIVES[@]}"
219			printf -v ROOTDEVS "raid.%s2 " "${!DRIVES[@]}"
220	chrissn	1.6	printf -v SWAPDEVS "raid.%s3 " "${!DRIVES[@]}"
221	chrissn	1.2
222			# Include the EFI partition if necessary
223			if [ -d /sys/firmware/efi ] ; then
224	chrissn	1.3	printf "raid /boot/efi --fstype=efi --level=1 --spares=0 --device=md9 %s\n" "$EFIDEVS" >> /tmp/part-include
225	chrissn	1.2	fi
226	jpp	1.1
227	chrissn	1.6	# Boot partition
228	chrissn	1.3	printf "raid /boot --fstype=xfs --level=1 --spares=0 --device=md0 %s\n" "$BOOTDEVS" >> /tmp/part-include
229	jpp	1.1
230	chrissn	1.6	# Default to LVM unless specified
231			if [ $NOLVM ] ; then
232			cat >> /tmp/part-include <<EOF
233			raid / --fstype=xfs --level=$LEVEL --spares=$SPARE --device=md1 $ROOTDEVS
234			raid swap --fstype=swap --level=$LEVEL --spares=$SPARE --device=md2 $SWAPDEVS
235			EOF
236			else
237			cat >> /tmp/part-include <<EOF
238			raid pv.01 --level=$LEVEL --spares=$SPARE --device=md1 $ROOTDEVS
239			volgroup main pv.01
240			logvol / --fstype xfs --name=root --vgname=main --grow --size=3000
241			logvol swap --fstype swap --name=swap --vgname=main --recommended
242	chrissn	1.2	EOF
243	chrissn	1.6	fi
244	chrissn	1.2	fi
245			fi
246	jpp	1.1
247	chrissn	1.6	echo "Final part-include output:"
248			cat /tmp/part-include
249
250	jpp	1.1	%end
251
252
253	chrissn	1.2	# SME events in post-install
254	jpp	1.1	%post --interpreter=/usr/bin/bash --log=/var/log/ks.post02.log
255	chrissn	1.4	userdel -r installer
256			sleep 2
257			/sbin/e-smith/signal-event post-install
258			sleep 2
259			/sbin/e-smith/db configuration set UnsavedChanges no
260	jpp	1.1	touch /forcequotacheck
261	chrissn	1.2	%end
262	jpp	1.1
263
264			%post --nochroot --log=/mnt/sysimage/var/log/ks.post01.log
265			#!/bin/bash
266			sysimage="/mnt/sysimage"
267	chrissn	1.6	cp -r /var/log/sme-partitioning.log ${sysimage}/root/
268	jpp	1.1	cp -r /tmp/anaconda.log ${sysimage}/root/
269			%end