sme10/netinstall/ks.cfg

# System authorization information
auth --enableshadow --passalgo=sha512

# We do not want SELinux
selinux --disabled

# Services to activate
services --disabled=lm_sensors

# Default root pass, will be changed in post-install process anyway
rootpw --lock
user --name=installer --uid=9999

# Accept EULA
eula --agreed

# Partitioning from pre section
%include /tmp/part-include

# Disable kdump
%addon com_redhat_kdump --disable
%end


# Add netinstall repos
url --url=https://mirror.koozali.org/releases/testing/10/smeos/x86_64/
repo --name=smeupdates --baseurl=https://mirror.koozali.org/releases/testing/10/smeupdates/x86_64/

# Packages to install
%packages
@^minimal
@base
@core
-chrony
-kexec-tools
%end


# Partitioning in pre-install
%pre --interpreter=/bin/bash --log=/var/log/sme-partitioning.log

# Read command line arguments
if grep nolvm "/proc/cmdline" ; then NOLVM=true ; fi
if grep noraid "/proc/cmdline" ; then NORAID=true ; fi
if grep noxfs "/proc/cmdline" ; then FSTYPE="ext4" ; else FSTYPE="xfs" ; fi 
echo "Command line arguments:"
cat /proc/cmdline

# Minimum size of hard drive needed specified in MB
MINSIZE=5000

# Number of detected drives and first disk size
NDEV=0
BASESIZE=0
SIZEDIFF=0

# Loop through block devices, keep those over MINSIZE and ensure additional drives for RAID are within 100MB of the first
for DEV in $(lsblk -nl | grep disk | cut -d' ' -f1) ; do
  if [ -d /sys/block/$DEV ] ; then
    REMOVABLE=`cat /sys/block/$DEV/removable`
    if (( $REMOVABLE == 0 )) ; then
      SIZE=`cat /sys/block/$DEV/size`
      MB=$(($SIZE/2**11))
      if [ $MB -gt $MINSIZE ] ; then
        if [ $NDEV == 0 ] ; then
          echo "First drive found: $DEV with size $MB MB"
          DRIVES[$NDEV]=$DEV
          BASESIZE=$MB
          ((NDEV++))
        else
          SIZEDIFF=$(($MB-$BASESIZE))
          if [ $SIZEDIFF -gt 100 ] || [ $SIZEDIFF -lt -100 ] ; then
            echo "Drive found but size of $MB MB doesn't match $BASESIZE MB - ignoring"
          else
            echo "Additional drive found: $DEV with size $MB MB"
            DRIVES[$NDEV]=$DEV
            ((NDEV++))
          fi
        fi
      fi
    fi
  fi
done
echo "Total disks found: $NDEV"

# Calculate recommended swap size for RAID + nolvm case
if [ -d /sys/firmware/efi ] ; then
  DISKSPARE=$(($BASESIZE-200-500-3000))
else
  DISKSPARE=$(($BASESIZE-1-500-3000))
fi
MEMSIZE=$(awk '/^MemTotal:/{print $2}' /proc/meminfo)
MEMSIZEMB=$(($MEMSIZE/2**10))

if [ $MEMSIZEMB -lt 2000 ] ; then
  SWAPSIZE=$((2*$MEMSIZEMB))
elif [ $MEMSIZEMB -lt 8000 ] ; then
  SWAPSIZE=$MEMSIZEMB
else
  SWAPSIZE=8000
fi
if [ $SWAPSIZE -gt $DISKSPARE ] ; then SWAPSIZE=$DISKSPARE ; fi

# Declare useful variables
printf -v DRIVELIST ",%s" "${DRIVES[@]}"
if [ $NORAID ] ; then
  DRIVELIST=${DRIVES[0]}
else
  DRIVELIST=${DRIVELIST:1}
fi

echo "Final drive list: $DRIVELIST"
LEVEL=1
SPARE=0


# Error if detection has failed and fall back
if [ ${#DRIVES[@]} == 0 ] ; then
  echo "No drive suitable for installation found! Reverting to Anaconda defaults."

  cat > /tmp/part-include <<EOF
  # Clear the Master Boot Record
  zerombr

  # Clear current partitions
  clearpart --all  --initlabel

  # Automatically create partitions using LVM
  autopart --lvm --nohome
EOF

# Otherwise clear detected devices and set up bootloader
else
  cat > /tmp/part-include <<EOF
  # Clear the Master Boot Record
  zerombr

  # Clear current partitions and install bootloader
  clearpart --all --drives=$DRIVELIST --initlabel
  ignoredisk --only-use=$DRIVELIST
  bootloader --location=mbr --driveorder=$DRIVELIST
EOF

  # If single disk or noraid specific then set up partitioning without RAID
  # NOTE: From this point we're appending to part-include
  if [ ${#DRIVES[@]} == 1 ] || [ $NORAID ] ; then

    # Include the EFI or biosboot partition if necessary
    if [ -d /sys/firmware/efi ] ; then
      printf "part /boot/efi --fstype=efi --size=200 --ondisk=%s\n" "${DRIVES[0]}" >> /tmp/part-include
    elif [ $BASESIZE -gt 2048000 ] ; then
      printf "part biosboot --fstype=biosboot --size=1 --ondisk=%s\n" "${DRIVES[0]}" >> /tmp/part-include
    fi

    # Create boot partition
    printf "part /boot --fstype=%s --size=500  --label=BOOT --ondisk=%s\n" "$FSTYPE" "${DRIVES[0]}" >> /tmp/part-include

    # Default to LVM unless specified at command line
    if [ $NOLVM ] ; then
      cat >> /tmp/part-include <<EOF
      part / --fstype=$FSTYPE --grow --size=3000 --label=ROOT --ondisk=${DRIVES[0]}
      part swap --fstype=swap --recommended --label=SWAP --ondisk=${DRIVES[0]}
EOF
    else
      cat >> /tmp/part-include <<EOF
      part pv.01 --size=4300 --grow --ondisk=${DRIVES[0]}
      volgroup main pv.01
      logvol / --fstype=$FSTYPE --name=root --vgname=main --grow --size=3000
      logvol swap --fstype=swap --name=swap --vgname=main --recommended
EOF
    fi

  # Otherwise multiple disks - prepare for RAID
  else

    # Define EFI or biosboot and RAID partitions
    for i in "${!DRIVES[@]}"; do

      if [ -d /sys/firmware/efi ] ; then
        printf "part raid.%s0 --size=200 --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
      elif [ $BASESIZE -gt 2048000 ] ; then
        printf "part biosboot --fstype=biosboot --size=1 --ondisk=%s\n" "${DRIVES[$i]}" >> /tmp/part-include
      fi
      printf "part raid.%s1 --size=500 --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include

      # Default to LVM unless specified
      if [ $NOLVM ] ; then
        printf "part raid.%s2 --size=3000 --grow --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
        printf "part raid.%s3 --size=%s --ondisk=%s\n" "$i" "$SWAPSIZE" "${DRIVES[$i]}" >> /tmp/part-include
      else
        printf "part raid.%s2 --size=4300 --grow --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
      fi

    done

    # Compute RAID level
    # from https://wiki.contribs.org/Raid
    # 2 Drives - Software RAID 1
    # 3 Drives - Software RAID 1 + 1 Hot-spare
    # 4 Drives - Software RAID 6
    # 5+ Drives - Software RAID 6 + 1 Hot-spare

    if [ ${#DRIVES[@]} == 2 ] ; then
      LEVEL=1
      SPARE=0
    elif [ ${#DRIVES[@]} == 3 ] ; then
      LEVEL=1
      SPARE=1
    elif [ ${#DRIVES[@]} == 4 ] ; then
      LEVEL=6
      SPARE=0
    else
      LEVEL=6
      SPARE=1
    fi

    # Set up RAID devices
    printf -v EFIDEVS "raid.%s0 " "${!DRIVES[@]}"
    printf -v BOOTDEVS "raid.%s1 " "${!DRIVES[@]}"
    printf -v ROOTDEVS "raid.%s2 " "${!DRIVES[@]}"
    printf -v SWAPDEVS "raid.%s3 " "${!DRIVES[@]}"
    
    # Include the EFI partition if necessary
    if [ -d /sys/firmware/efi ] ; then
      printf "raid /boot/efi --fstype=efi --level=1 --spares=0 --device=md9 %s\n" "$EFIDEVS" >> /tmp/part-include
    fi

    # Boot partition
    printf "raid /boot --fstype=%s --level=1 --spares=0 --device=md0 %s\n" "$FSTYPE" "$BOOTDEVS" >> /tmp/part-include

    # Default to LVM unless specified
    if [ $NOLVM ] ; then
      cat >> /tmp/part-include <<EOF
      raid / --fstype=$FSTYPE --level=$LEVEL --spares=$SPARE --device=md1 $ROOTDEVS
      raid swap --fstype=swap --level=$LEVEL --spares=$SPARE --device=md2 $SWAPDEVS
EOF
    else
      cat >> /tmp/part-include <<EOF
      raid pv.01 --level=$LEVEL --spares=$SPARE --device=md1 $ROOTDEVS
      volgroup main pv.01
      logvol / --fstype=$FSTYPE --name=root --vgname=main --grow --size=3000
      logvol swap --fstype swap --name=swap --vgname=main --recommended
EOF
    fi
  fi
fi

echo "Final part-include output:"
cat /tmp/part-include

%end


# SME events in post-install
%post  --interpreter=/usr/bin/bash --log=/var/log/ks.post02.log
userdel -r installer
sleep 2
/sbin/e-smith/signal-event post-install
sleep 2
/sbin/e-smith/db configuration set UnsavedChanges no
touch /forcequotacheck
%end


%post  --nochroot --log=/mnt/sysimage/var/log/ks.post01.log
#!/bin/bash
sysimage="/mnt/sysimage"
cp -r /var/log/sme-partitioning.log ${sysimage}/root/
cp -r /tmp/anaconda.log ${sysimage}/root/
%end
1	jpp	1.1	# System authorization information
2			auth --enableshadow --passalgo=sha512
3
4	chrissn	1.2	# We do not want SELinux
5	jpp	1.1	selinux --disabled
6
7	chrissn	1.2	# Services to activate
8	jpp	1.1	services --disabled=lm_sensors
9
10	chrissn	1.2	# Default root pass, will be changed in post-install process anyway
11			rootpw --lock
12	chrissn	1.4	user --name=installer --uid=9999
13	jpp	1.1
14	chrissn	1.2	# Accept EULA
15	jpp	1.1	eula --agreed
16
17	chrissn	1.2	# Partitioning from pre section
18	jpp	1.1	%include /tmp/part-include
19
20	chrissn	1.2	# Disable kdump
21	jpp	1.1	%addon com_redhat_kdump --disable
22			%end
23
24	chrissn	1.2
25			# Add netinstall repos
26	chrissn	1.7	url --url=https://mirror.koozali.org/releases/testing/10/smeos/x86_64/
27			repo --name=smeupdates --baseurl=https://mirror.koozali.org/releases/testing/10/smeupdates/x86_64/
28	jpp	1.1
29	chrissn	1.2	# Packages to install
30			%packages
31			@^minimal
32			@base
33			@core
34			-chrony
35			-kexec-tools
36			%end
37
38
39			# Partitioning in pre-install
40	chrissn	1.6	%pre --interpreter=/bin/bash --log=/var/log/sme-partitioning.log
41	chrissn	1.2
42	chrissn	1.6	# Read command line arguments
43			if grep nolvm "/proc/cmdline" ; then NOLVM=true ; fi
44			if grep noraid "/proc/cmdline" ; then NORAID=true ; fi
45	chrissn	1.7	if grep noxfs "/proc/cmdline" ; then FSTYPE="ext4" ; else FSTYPE="xfs" ; fi
46	chrissn	1.6	echo "Command line arguments:"
47			cat /proc/cmdline
48	jpp	1.1
49	chrissn	1.6	# Minimum size of hard drive needed specified in MB
50			MINSIZE=5000
51
52			# Number of detected drives and first disk size
53	jpp	1.1	NDEV=0
54	chrissn	1.6	BASESIZE=0
55			SIZEDIFF=0
56	jpp	1.1
57	chrissn	1.6	# Loop through block devices, keep those over MINSIZE and ensure additional drives for RAID are within 100MB of the first
58			for DEV in $(lsblk -nl \| grep disk \| cut -d' ' -f1) ; do
59			if [ -d /sys/block/$DEV ] ; then
60	jpp	1.1	REMOVABLE=`cat /sys/block/$DEV/removable`
61	chrissn	1.6	if (( $REMOVABLE == 0 )) ; then
62	jpp	1.1	SIZE=`cat /sys/block/$DEV/size`
63	chrissn	1.6	MB=$(($SIZE/2**11))
64			if [ $MB -gt $MINSIZE ] ; then
65			if [ $NDEV == 0 ] ; then
66			echo "First drive found: $DEV with size $MB MB"
67			DRIVES[$NDEV]=$DEV
68			BASESIZE=$MB
69			((NDEV++))
70			else
71			SIZEDIFF=$(($MB-$BASESIZE))
72			if [ $SIZEDIFF -gt 100 ] \|\| [ $SIZEDIFF -lt -100 ] ; then
73			echo "Drive found but size of $MB MB doesn't match $BASESIZE MB - ignoring"
74			else
75			echo "Additional drive found: $DEV with size $MB MB"
76			DRIVES[$NDEV]=$DEV
77			((NDEV++))
78			fi
79			fi
80	jpp	1.1	fi
81			fi
82			fi
83			done
84	chrissn	1.6	echo "Total disks found: $NDEV"
85
86			# Calculate recommended swap size for RAID + nolvm case
87			if [ -d /sys/firmware/efi ] ; then
88			DISKSPARE=$(($BASESIZE-200-500-3000))
89			else
90			DISKSPARE=$(($BASESIZE-1-500-3000))
91			fi
92			MEMSIZE=$(awk '/^MemTotal:/{print $2}' /proc/meminfo)
93			MEMSIZEMB=$(($MEMSIZE/2**10))
94
95			if [ $MEMSIZEMB -lt 2000 ] ; then
96			SWAPSIZE=$((2*$MEMSIZEMB))
97			elif [ $MEMSIZEMB -lt 8000 ] ; then
98			SWAPSIZE=$MEMSIZEMB
99			else
100			SWAPSIZE=8000
101			fi
102			if [ $SWAPSIZE -gt $DISKSPARE ] ; then SWAPSIZE=$DISKSPARE ; fi
103	jpp	1.1
104	chrissn	1.2	# Declare useful variables
105			printf -v DRIVELIST ",%s" "${DRIVES[@]}"
106	chrissn	1.6	if [ $NORAID ] ; then
107			DRIVELIST=${DRIVES[0]}
108			else
109			DRIVELIST=${DRIVELIST:1}
110			fi
111
112			echo "Final drive list: $DRIVELIST"
113	chrissn	1.2	LEVEL=1
114			SPARE=0
115
116	chrissn	1.6
117	chrissn	1.2	# Error if detection has failed and fall back
118			if [ ${#DRIVES[@]} == 0 ] ; then
119			echo "No drive suitable for installation found! Reverting to Anaconda defaults."
120
121			cat > /tmp/part-include <<EOF
122			# Clear the Master Boot Record
123			zerombr
124
125			# Clear current partitions
126			clearpart --all --initlabel
127	jpp	1.1
128	chrissn	1.2	# Automatically create partitions using LVM
129			autopart --lvm --nohome
130	jpp	1.1	EOF
131
132	chrissn	1.2	# Otherwise clear detected devices and set up bootloader
133	jpp	1.1	else
134	chrissn	1.2	cat > /tmp/part-include <<EOF
135			# Clear the Master Boot Record
136			zerombr
137
138			# Clear current partitions and install bootloader
139			clearpart --all --drives=$DRIVELIST --initlabel
140			ignoredisk --only-use=$DRIVELIST
141			bootloader --location=mbr --driveorder=$DRIVELIST
142			EOF
143
144	chrissn	1.6	# If single disk or noraid specific then set up partitioning without RAID
145	chrissn	1.2	# NOTE: From this point we're appending to part-include
146	chrissn	1.6	if [ ${#DRIVES[@]} == 1 ] \|\| [ $NORAID ] ; then
147	chrissn	1.2
148	chrissn	1.6	# Include the EFI or biosboot partition if necessary
149	chrissn	1.2	if [ -d /sys/firmware/efi ] ; then
150			printf "part /boot/efi --fstype=efi --size=200 --ondisk=%s\n" "${DRIVES[0]}" >> /tmp/part-include
151	chrissn	1.6	elif [ $BASESIZE -gt 2048000 ] ; then
152			printf "part biosboot --fstype=biosboot --size=1 --ondisk=%s\n" "${DRIVES[0]}" >> /tmp/part-include
153	chrissn	1.2	fi
154	jpp	1.1
155	chrissn	1.6	# Create boot partition
156	chrissn	1.7	printf "part /boot --fstype=%s --size=500 --label=BOOT --ondisk=%s\n" "$FSTYPE" "${DRIVES[0]}" >> /tmp/part-include
157	chrissn	1.6
158			# Default to LVM unless specified at command line
159			if [ $NOLVM ] ; then
160			cat >> /tmp/part-include <<EOF
161	chrissn	1.7	part / --fstype=$FSTYPE --grow --size=3000 --label=ROOT --ondisk=${DRIVES[0]}
162	chrissn	1.6	part swap --fstype=swap --recommended --label=SWAP --ondisk=${DRIVES[0]}
163	chrissn	1.2	EOF
164	chrissn	1.6	else
165			cat >> /tmp/part-include <<EOF
166			part pv.01 --size=4300 --grow --ondisk=${DRIVES[0]}
167			volgroup main pv.01
168	chrissn	1.7	logvol / --fstype=$FSTYPE --name=root --vgname=main --grow --size=3000
169	chrissn	1.6	logvol swap --fstype=swap --name=swap --vgname=main --recommended
170			EOF
171			fi
172	chrissn	1.2
173			# Otherwise multiple disks - prepare for RAID
174			else
175
176	chrissn	1.6	# Define EFI or biosboot and RAID partitions
177	chrissn	1.2	for i in "${!DRIVES[@]}"; do
178	chrissn	1.6
179	chrissn	1.2	if [ -d /sys/firmware/efi ] ; then
180			printf "part raid.%s0 --size=200 --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
181	chrissn	1.6	elif [ $BASESIZE -gt 2048000 ] ; then
182			printf "part biosboot --fstype=biosboot --size=1 --ondisk=%s\n" "${DRIVES[$i]}" >> /tmp/part-include
183	chrissn	1.2	fi
184			printf "part raid.%s1 --size=500 --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
185	chrissn	1.6
186			# Default to LVM unless specified
187			if [ $NOLVM ] ; then
188			printf "part raid.%s2 --size=3000 --grow --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
189			printf "part raid.%s3 --size=%s --ondisk=%s\n" "$i" "$SWAPSIZE" "${DRIVES[$i]}" >> /tmp/part-include
190			else
191			printf "part raid.%s2 --size=4300 --grow --ondisk=%s\n" "$i" "${DRIVES[$i]}" >> /tmp/part-include
192			fi
193
194	chrissn	1.2	done
195
196			# Compute RAID level
197			# from https://wiki.contribs.org/Raid
198			# 2 Drives - Software RAID 1
199			# 3 Drives - Software RAID 1 + 1 Hot-spare
200	chrissn	1.3	# 4 Drives - Software RAID 6
201			# 5+ Drives - Software RAID 6 + 1 Hot-spare
202	chrissn	1.2
203			if [ ${#DRIVES[@]} == 2 ] ; then
204			LEVEL=1
205			SPARE=0
206			elif [ ${#DRIVES[@]} == 3 ] ; then
207			LEVEL=1
208			SPARE=1
209	chrissn	1.3	elif [ ${#DRIVES[@]} == 4 ] ; then
210			LEVEL=6
211			SPARE=0
212	chrissn	1.2	else
213			LEVEL=6
214			SPARE=1
215			fi
216	jpp	1.1
217	chrissn	1.2	# Set up RAID devices
218			printf -v EFIDEVS "raid.%s0 " "${!DRIVES[@]}"
219			printf -v BOOTDEVS "raid.%s1 " "${!DRIVES[@]}"
220			printf -v ROOTDEVS "raid.%s2 " "${!DRIVES[@]}"
221	chrissn	1.6	printf -v SWAPDEVS "raid.%s3 " "${!DRIVES[@]}"
222	chrissn	1.2
223			# Include the EFI partition if necessary
224			if [ -d /sys/firmware/efi ] ; then
225	chrissn	1.3	printf "raid /boot/efi --fstype=efi --level=1 --spares=0 --device=md9 %s\n" "$EFIDEVS" >> /tmp/part-include
226	chrissn	1.2	fi
227	jpp	1.1
228	chrissn	1.6	# Boot partition
229	chrissn	1.7	printf "raid /boot --fstype=%s --level=1 --spares=0 --device=md0 %s\n" "$FSTYPE" "$BOOTDEVS" >> /tmp/part-include
230	jpp	1.1
231	chrissn	1.6	# Default to LVM unless specified
232			if [ $NOLVM ] ; then
233			cat >> /tmp/part-include <<EOF
234	chrissn	1.7	raid / --fstype=$FSTYPE --level=$LEVEL --spares=$SPARE --device=md1 $ROOTDEVS
235	chrissn	1.6	raid swap --fstype=swap --level=$LEVEL --spares=$SPARE --device=md2 $SWAPDEVS
236			EOF
237			else
238			cat >> /tmp/part-include <<EOF
239			raid pv.01 --level=$LEVEL --spares=$SPARE --device=md1 $ROOTDEVS
240			volgroup main pv.01
241	chrissn	1.7	logvol / --fstype=$FSTYPE --name=root --vgname=main --grow --size=3000
242	chrissn	1.6	logvol swap --fstype swap --name=swap --vgname=main --recommended
243	chrissn	1.2	EOF
244	chrissn	1.6	fi
245	chrissn	1.2	fi
246			fi
247	jpp	1.1
248	chrissn	1.6	echo "Final part-include output:"
249			cat /tmp/part-include
250
251	jpp	1.1	%end
252
253
254	chrissn	1.2	# SME events in post-install
255	jpp	1.1	%post --interpreter=/usr/bin/bash --log=/var/log/ks.post02.log
256	chrissn	1.4	userdel -r installer
257			sleep 2
258			/sbin/e-smith/signal-event post-install
259			sleep 2
260			/sbin/e-smith/db configuration set UnsavedChanges no
261	jpp	1.1	touch /forcequotacheck
262	chrissn	1.2	%end
263	jpp	1.1
264
265			%post --nochroot --log=/mnt/sysimage/var/log/ks.post01.log
266			#!/bin/bash
267			sysimage="/mnt/sysimage"
268	chrissn	1.6	cp -r /var/log/sme-partitioning.log ${sysimage}/root/
269	jpp	1.1	cp -r /tmp/anaconda.log ${sysimage}/root/
270			%end