--- cdrom.image/sme8/README.txt 2010/07/11 16:09:26 1.5 +++ cdrom.image/sme8/README.txt 2013/10/12 05:51:47 1.22 @@ -1,48 +1,16 @@ -SME Server 8.0 Beta 6 Release Notes -=================================== +SME Server 8.1Beta2 Release Notes +================================= -July 11 2010 +14 October 2013 The SME Server development team is pleased to announce the release of -SME Server 8.0beta6 which is based on CentOS 5.5 and will be the next -major release of SME Server. This is the final planned Beta for SME 8. +SME Server 8.1 Beta 2 which is based on CentOS 5.9 Bug reports and reports of potential bugs should be raised in the bug tracker (and only there, please); http://bugs.contribs.org/ -*************************** -Testers Please Note the following... - -1. SME Server users should not upgrade production servers to this - release but those who can are encouraged to load the beta to a - dedicated test machine and take part in the testing phase. - -2. CentOS 5 has dropped support for i586 and therefore SME Server 8 - will not work on i586 hardware. [See bugzilla:2845]. i586 hardware - means processors before and including Intel Pentium, Pentium MMX; - AMD K5, K6, K6-II, K6-III and Via C3. i686 architecture processors - are Intel Pentium Pro, Pentium II, Pentium III; AMD Athlon, - Athlon XP and later. - -3. Upgrading from previous releases should only be done on clean - machines without contribs or other modifications. Issues with - upgrading from clean SME machines can be reported in the bug - tracker, but detailed reviews of upgrading paths will not start - until Release Candidate versions are made available. - -4. Some notes on on SME 8 including help on upgrades can be found at - http://wiki.contribs.org/SME_Server_8 - -5. Please note it may take up to 48 hours for mirrors to finish syncing, - during this time you may experience problems. - You can download SME8.0 Beta 5 from - http://mirror.contribs.org/smeserver/releases/testing/8/iso/i386/ - or for other methods see http://wiki.contribs.org/SME_Server_8 - -*************************** - About SME Server ================ @@ -54,142 +22,236 @@ is only possible through the efforts of However, the availability and quality of SME Server is dependent on meeting our expenses, such as hosting costs, server hardware, etc. -As such, we ask for a small donation to offset costs and fund further +As such, we ask for a donation to offset costs and fund further development. +a) If you are a school, a church, a non-profit organisation or an individual +using SME Server for private purposes, we would appreciate you to contribute +within your means toward the costs associated with hosting, maintenance and development. +b) If you are a company or an integrator and you are deploying SME Server in +the course of your work to generate revenue, we expect you to make a donation +commensurate with the level of revenue you generate and the number of servers +your have in the field. Please, help the project Please visit http://wiki.contribs.org/Donate to donate. -Thanks and a plea for help -========================== + +Thanks +====== The development team would like to thank all of those who have involved -themselves with this beta release. At this stage in development the role -of testers is vital; the final release date and the stability and -quality of the new version depend on full and thorough testing by all -levels of users, right from beginners who may be confused by, and draw -the developers -attention to, insufficiently transparent system design, up to seasoned -and skilled users who can probe the system deeply. Bug triage and -verification testing needs lots of community involvement; please try to -spare some time to this vital aspect of our community's future. - -This release, which is based on a major update of the Centos Core, -contains many new features. Please run Software Installer in Server -Manager regularly during testing to be sure your system reflects the -latest stage of development. +themselves with this release. -Major changes in beta 6 -======================= -The policy is to stick with upstream updates unless there are compelling -reasons not to. The number of customers unable to run the software they -want because of the Samba and PHP versions constituted a compelling -reason. - -Samba 3x: -The Samba packages have reverted to those provided by CentOS to simplify -the support needed. This version of samba provides support for Windows 7 -domain logins. +Notes +===== + +1. CentOS 5 has dropped support for i586 and therefore SME Server 8.1 + will not work on i586 hardware. [See bugzilla:2845]. i586 hardware + means processors before and including Intel Pentium, Pentium MMX; + AMD K5, K6, K6-II, K6-III and Via C3. i686 architecture processors + are Intel Pentium Pro, Pentium II, Pentium III; AMD Athlon, + Athlon XP and later. + +2. Some notes on SME 8.1 including help on upgrades can be found at + http://wiki.contribs.org/SME_Server_8 + +3. Please note it may take up to 48 hours for mirrors to finish syncing, + during this time you may experience problems. + You can download SME8.1 from + http://mirror.contribs.org/smeserver/releases/testing/8/iso/i386/ + or for other methods see http://wiki.contribs.org/SME_Server_8 + + +Changes from Beta 1 +=================== + +nodmraid is now the default install option as many issues have been seen with +dmraid. +Installer warning updated to clarify all attached disks will be reformatted. +SME Server changes to initscripts included. +Replace vfs_shadow_copy with vfs_shadow_copy2 for shadow snapshots. +Updated to latest Antivirus, ClamAV, 0.98. +Added donation text and graphic to login page and server-manager. +Modules necessary to implement .htaccess have now been loaded by default. Changes in this release ======================= -This section of this README file lists all package changes carried out -by SME-associated developers since SME Server 8.0 Beta 5. +Packages altered by Centos, Redhat, and Fedora-associated developers are +not included. -The package changelogs often included earlier changes and changes -carried out by non-SME-associated developers; these were removed to -shorten the list. Packages recently altered by Centos, Redhat, and -Fedora-associated developers are not included. Backups ------- -- Update backup instructions in server-manager -- Strip spaces from Workstation Backup hostname -- Fix error causing restore to report failed where it was complete -- Check if local USB disk is mounted in backup panel -- Fix removal of leading slash in storage location -- Add system name in Workstation Backups email -- To: field missing from header in Workstation Backups email +- Workstation Backup allows the day of the week to be specified on which a + full backup occurs. This now works correctly for all days of the week. +- To increase reliability of backups to a Microsoft Vista drive, a one second + delay was added to the backup. This issue is not seen on the newer Microsoft + OS. +- Allow user setting of compression level for Desktop and Console Backups. + For example: config setprop backupconsole CompressionLevel -6 + The default is -6, where -1 is fastest and -9 is optimal compression. +- In the console, under item 8, refer to removable media instead of USB + device. +- After a restore from the console the post-upgrade event was not being + performed. +- Add an option to use Wake on LAN before starting Workstation Backup. +- Workstation Backup, report cifs mount errors. +- Workstation Backup, be compatible with destinations that include spaces. +- Workstation Backup, remove temporary directory on success . +- Workstation Backup, add a choice to delete old backup before or after +backup. File Server ----------- -- Remove require strong key part of regedit file -- Use samba3x package for windows 7 compatibility -- Backup all the tdb files (thanks Daniel) -- Post scriptlet fix -- Explicitly declare samba private dir -- Fix tdb file paths to backup in run script -- Add dependency /usr/bin/tdbbackup +- Replace vfs_shadow_copy with vfs_shadow_copy2 for shadow snapshots. +- Add support for Windows 8 domain joining & user login with a new registry + file. + /server-resources/regedit/win8samba.reg +- New optional samba property smb{WideLinks}, valid values are 'no' or 'yes'. + The current samba default is 'no'. + see http://www.samba.org/samba/docs/man/manpages-3/smb.conf.5.html#WIDELINKS + For example to enable samba Wide Links + # config setprop smb WideLinks yes +- Add windows network performance enhancements registry file that can help + Windows slow logons. + /server-resources/regedit/windows_samba_performance.reg +- Two new optional samba properties smb{ServerMaxProtocol} & + smb{ClientMaxProtocol}. + For example: # config setprop smb ServerMaxProtocol NT1 +- Remove the samba_audit specific logrotate configuration which was causing an + email to be sent to the admin every night. +- Enable smb auditing per ibay, it is disabled by default. + Auditing is enabled via + # db accounts setprop ibayname Audit enabled + # signal-event ibay-modify ibayname +- Prevent emailing about the normal, weekly, checks of RAID arrays +- Update ServerName (Samba netbios name) when SystemName is updated +- Workaround a deficiency in the proftpd package where it does not handle long + lines correctly in its configuration file. This caused FTP to fail when + large numbers of local networks were configured. +- Ensure Deny from all is on its own line in 15LimitLOGIN + + +LDAP (Optional in SME 8.1, and considered experimental) +---- +- Fix init-account script when LDAP auth is enabled. +- Fix group creation/modification when LDAP auth is enabled. +- The ldap.init script which starts just after the ldap service waits for + slapd to be to available. The logic to check if slapd is ready was + corrected. +- Add missing dependency on openldap-servers. +- The ldap log files can take significant space on servers with a lot of + users. This update will ensure old BDB log files are removed. + Localisation ------------ -- Add Hebrew language -- Fix translation of local nic string in console -- Other fixes include updated translations for the existing languages. +- Latest translations included. + Mail Server ----------- -- Fix migrate fragment -- Set smtp-auth-proxy Debug property to disabled instead of 0 -- Fix HeloHost patch. -- Block by default the SMTP transparent proxy -- Updated templates to reflect changes in imp 4.3.7 -- Update to 0.84 -- add sme specific patches -- Add qpsmtpd template fragment for tls_before_auth -- Remove cron.daily jobs that are no longer needed -- Newer spamassassin imports keys on install -- Update email addresses on domain change (thanks Daniel) -- New option to block outgoing SMTP connections +- Updated to latest Antivirus, ClamAV, 0.98. +- Fetchmail multidrop mode follows TCPPort setting. +- Avoid use of unitialised variables in smtp migrate fragments. +- Allow smtp_auth_proxy to use port 587 with STARTTLS. +- Due to SMTP servers not handling SMTP Auth well enable the use of a + blacklist to remove the troublesome methods. + For example to remove CRAM-MD5: + # db configuration setprop smtp-auth-proxy Blacklist CRAM-MD5 + # sv t /service/smtp-auth-proxy + More than one method can be removed: + # db configuration setprop smtp-auth-proxy Blacklist "CRAM-MD5 DIGEST-MD5" + # sv t /service/smtp-auth-proxy +- imap-relocate-maildirs action was removed.It was no longer necessary and was + sometimes very slow. +- The soft memory limits for pop3 and pop3s were increased. Two new optional + database properties pop3{MemLimit} and pop3s{MemLimit} + For example to increase the memory limit + # config setprop pop3s MemLimit 50000000 + # expand-template /var/service/pop3s/env/MEMLIMIT + # config setprop pop3 MemLimit 50000000 + # expand-template /var/service/pop3/env/MEMLIMIT +- New optional qmail property qmail{ConcurrencyLocal} and default for + /var/qmail/control/concurrencylocal changed to 20. + For example to decrease the local concurrecny limit + # config setprop qmail ConcurrencyLocal 6 +- Modify domain style pseudonym pointing to user with dot in name. +- Accept messages with no body and no trailing \n after headers. +- Prevent email delivery failure with required updates for perl-Net-DNS and + qpsmtpd. +- New optional spamassassin property spamassassin{MaxMessageSize} to allow for + spamassassin qpsmtpd's plugin size limit to be changed. + For example to also scan larger files + # config setprop spamassassin MaxMessageSize 1500000 +- Make CipherSuite secure by default and tls ciphers defaults to disallow + SSLv2. +- Fix how qpsmtpd tags spam email. +- Add template to extend the functionality of SSL verified certificate to IMAP + and SSMTP transactions +- Update ClamAV to release 0.97.8. +- Load TextCat plugin if ok_languages is enabled. + Server manager -------------- -- Improve the HTML formatting of the modify quota panel +- Added donation text and graphic to login page and server-manager. +- Do not load mod_ssl for httpd-admin as it is not needed and creates log + noise. +- If the browser used to access the server-manager used lower case for + %escapes a blank screen would be shown. The server manager URL processing is + now case-insensitive for %escapes. +- Fix more uninitialized warnings in log (httpd/admin_error_log) from HTML.pm. +- Remove log noise (httpd/admin-error-log) when accessing the Create Starter + Web panel in server-manager + Webmail and Groupware --------------------- -- Updated to Horde 3.3.8 -- Updated to imp 4.3.7 -- Update to Ingo 1.2.4 -- Updated to Turba 2.3.4 -- Upgrade horde templates to reflect changes in Horde 3.3.8 -- Update e-smith-ingo templates to reflect changes in Ingo 1.2.4 -- Patch that adds the ability to have a local LDAP Group Address book. -- Patch to template attributes.php to add ability to have multiple email - values for a contact. Separate entries with a comma and a space -- Update to freebusy info in sources.php + +- If IMAP is disabled in the server manager email panel, IMAP will now listen + to the loopback interface to allow webmail to function. +- Webmail no longer uses SSL over loopback interface. + Web Server ---------- -No updates +- Modules necessary to implement .htaccess have now been loaded by default. +- Disable index listing of Apache icons folder. +- PHP's magic_quotes are deprecated so should no longer be used. The php.ini + will now have "magic_quotes Off" instead of fully removing it as the default + is ON. +- Change wording of Software Update button. + Other fixes and updates ----------------------- -- FreeBusy patch fix (save account changes) -- Handle no network interface scenario in console -- Patch that will remove all FreeBusy references from e-smith-base. -- Fix ldap-create errors when adding empty groups -- Update admin information (thanks Daniel) -- Fix indentation in S25ldap-update script -- Don't try to save ibay password to ldap -- Fix %postun typo -- Do not allow pool.ntp.org as NTP server -- Prepare for obsoletion of magic_quotes* when we supply PHP 5.3.0+ -- Fix missing space causing errors parsing the iptables rules -- Rework 91adjustPortForward template fragment -- Add migrate fragment for centos excludes -- Fix migrate fragment to not throw warnings -- Fix yum database removal (missing one) -- Migrate MirrorList properties to sme8 repos -- Remove BaseURL properties if migrating to sme8 repos -- Remove yum databases and repodata if migrating to sme8 repos +- Remove old System Name from the Hosts DB +- Fix warning in /var/log/messages by correctly initialising the relevant + variable. The warning related to the HW Address of a NIC. +- user-modify-unix script could take many minutes, it has now been optimised + to take only seconds +- The memory limit for pppoe was increased to 100Mb. +- On upgrading from SME Server 7 to SME Server 8 an email could be sent to the + admin everyday due to a modified /etc/updatedb.conf file. This update + ensures the correct /etc/updatedb.conf file. +- Updated SME root server template as D-root changed its IPv4 address on the + 3rd of January 2013. +- The console would crash when no value is entered as static gateway in + servergateway(-private) mode. Improved error-checking in isValidIP() + prevents this. +- Use file locking to make sure that only one copy of the masq script is + running at any particular time. +- Add python-hashlib so we can read newer repodata signatures. +- Point mirrorlist to mirrorlist.contribs.org +- Increase memory limit for ntpd . General features ================ -- Based on CentOS 5.5 and all available updates +- Based on CentOS 5.9 and all available updates -$Id: README.txt,v 1.4 2010/03/05 22:02:58 wellsi Exp $ +$Id: README.txt,v 1.21 2013/10/06 15:40:54 wellsi Exp $