| 1 |
SME Server 8.0 Release Notes |
SME Server 9.0 Beta 2 Release Notes |
| 2 |
============================ |
=================================== |
| 3 |
|
|
| 4 |
21 May 2012 |
8 November 2013 |
| 5 |
|
|
| 6 |
The SME Server development team is pleased to announce the release of |
The SME Server development team is pleased to announce the release of |
| 7 |
SME Server 8.0 which is based on CentOS 5.8 |
SME Server 9.0 Beta 2 which is based on CentOS 6.4 |
| 8 |
|
|
| 9 |
Bug reports and reports of potential bugs should be raised in the bug |
Bug reports and reports of potential bugs should be raised in the bug |
| 10 |
tracker (and only there, please); |
tracker (and only there, please); |
| 15 |
================ |
================ |
| 16 |
|
|
| 17 |
SME Server is the leading Linux distribution for small and medium |
SME Server is the leading Linux distribution for small and medium |
| 18 |
enterprises. |
enterprises. SME Server is brought to you by Koozali Foundation, Inc., |
| 19 |
|
a non-profit corporation that exists to provide marketing and legal support |
| 20 |
|
for SME Server. |
| 21 |
|
|
| 22 |
SME Server is freely available under the GNU General Public License and |
SME Server is freely available under the GNU General Public License and |
| 23 |
is only possible through the efforts of the SME Server community. |
is only possible through the efforts of the SME Server community. |
| 24 |
However, the availability and quality of SME Server is dependent on |
However, the availability and quality of SME Server is dependent on |
| 25 |
meeting our expenses, such as hosting costs, server hardware, etc. |
meeting our expenses, such as hosting costs, server hardware, etc. |
| 26 |
|
|
| 27 |
As such, we ask for a small donation to offset costs and fund further |
As such, we ask for a donation to offset costs and fund further development. |
| 28 |
|
a) If you are a school, a church, a non-profit organisation or an individual |
| 29 |
|
using SME Server for private purposes, we would appreciate you to contribute |
| 30 |
|
within your means toward the costs associated with hosting, maintenance and |
| 31 |
development. |
development. |
| 32 |
|
b) If you are a company or an integrator and you are deploying SME Server in |
| 33 |
|
the course of your work to generate revenue, we expect you to make a donation |
| 34 |
|
commensurate with the level of revenue you generate and the number of servers |
| 35 |
|
your have in the field. Please, help the project |
| 36 |
|
|
| 37 |
Please visit http://wiki.contribs.org/Donate to donate. |
Please visit http://wiki.contribs.org/Donate to donate. |
| 38 |
|
|
| 39 |
|
Koozali Inc is happy to supply an invoice for any donations received, |
| 40 |
|
simply email treasurer@koozali.org |
| 41 |
|
|
| 42 |
|
|
| 43 |
Thanks |
Thanks |
| 44 |
====== |
====== |
| 45 |
|
|
| 49 |
Notes |
Notes |
| 50 |
===== |
===== |
| 51 |
|
|
| 52 |
1. CentOS 5 has dropped support for i586 and therefore SME Server 8 |
This section will be updated for SME Server 9.0 Beta 3 |
|
will not work on i586 hardware. [See bugzilla:2845]. i586 hardware |
|
|
means processors before and including Intel Pentium, Pentium MMX; |
|
|
AMD K5, K6, K6-II, K6-III and Via C3. i686 architecture processors |
|
|
are Intel Pentium Pro, Pentium II, Pentium III; AMD Athlon, |
|
|
Athlon XP and later. |
|
|
|
|
|
2. Some notes on SME 8 including help on upgrades can be found at |
|
|
http://wiki.contribs.org/SME_Server_8 |
|
|
|
|
|
3. Please note it may take up to 48 hours for mirrors to finish syncing, |
|
|
during this time you may experience problems. |
|
|
You can download SME8.0 from |
|
|
http://mirror.contribs.org/smeserver/releases/8/iso/i386/ |
|
|
or for other methods see http://wiki.contribs.org/SME_Server_8 |
|
|
|
|
|
Major changes since beta 7 |
|
|
========================== |
|
|
* No major changes were introduced since beta 7 |
|
| 53 |
|
|
|
Major changes in beta 7 |
|
|
======================= |
|
|
* Require authentication for all emails, including local. |
|
|
* Optional - to use ext4 instead of ext3 for file systems |
|
|
(except for /boot). At the boot prompt use "ext4" or "sme ext4". |
|
|
*** ext4 is considered experimental, so use with caution *** |
|
|
* Optional - LDAP authentication can be enabled. Once enabled it cannot |
|
|
be disabled, so experiment with care. |
|
|
To enable: db configuration setprop ldap Authentication enabled |
|
| 54 |
|
|
| 55 |
Major changes in beta 5 |
Major changes in this release |
| 56 |
======================= |
============================= |
|
The policy is to stick with upstream updates unless there are compelling |
|
|
reasons not to. The number of customers unable to run the software they |
|
|
want because of the PHP version constituted a compelling reason. |
|
| 57 |
|
|
| 58 |
PHP 5.2.10: is provided by the Red Hat Application Stack v2. |
The installer has been substantially modified in Beta 2. |
| 59 |
5.2 is needed by recent web applications such as OScommerce. |
It now creates the degraded RAID1 array with a single disk install. |
| 60 |
|
Some, but not all, install options are now supported. |
| 61 |
|
|
| 62 |
|
|
| 63 |
Changes in this release |
Changes in this release |
| 64 |
======================= |
======================= |
| 65 |
|
|
| 66 |
This section of this README file lists all package changes carried out |
This section will be further updated for SME Server 9.0 Beta 3 |
| 67 |
by SME-associated developers since 2009 where the most recent changes |
Currently this only shows changes since SME Server 9.0 Alpha 3 and it is |
| 68 |
to the package are dated after February 2010. The package changelogs |
autogenerated from the changelogs. A more human readable version will be |
| 69 |
often included earlier changes and changes carried out by non-SME- |
written for SME Server 9.0 Beta 3. |
| 70 |
associated developers; these were removed to shorten the list. Packages |
|
| 71 |
recently altered by Centos, Redhat, and Fedora-associated developers are |
|
| 72 |
|
Packages altered by Centos, Redhat, and Fedora-associated developers are |
| 73 |
not included. |
not included. |
| 74 |
|
|
| 75 |
|
|
| 76 |
Backups |
Backups |
| 77 |
------- |
------- |
| 78 |
- Provide support for Selective Restore with modern browsers |
- Dar updated to 2.4.10 |
| 79 |
- Remove default index.htm from Primary ibay before restore |
- Workstation Backup, add a choice to delete old backup before or after |
| 80 |
- Allow backup reports to go to an alternate user instead of admin |
backup. |
| 81 |
for Workstation Backups |
- Workstation Backup, remove temporary directory on success. |
| 82 |
- Improve how Backup to Workstation handles full remote disks. |
- Refactor directory tree creation and removal. |
| 83 |
- Do not make backup fail when due to a modified file. |
- Workstation Backup, inconsistent formatting of host share name in messages. |
| 84 |
- Localise the choices for 'Select the type of share for backup |
- Workstation Backup, more reliable catalog creation. |
| 85 |
destination' in the Configure Workstation Backup panel. |
- Workstation Backup, report cifs mount errors. |
| 86 |
- Improve the wording of the 'Backup or restore' server-manager panel. |
- Workstation Backup, do not access /proc/mounts |
| 87 |
Replace term "USB disk" with "removable disk" as this is not |
- Incremental backup fix. |
| 88 |
restricted to only USB disks. |
- Workstation Backup, allow spaces in the backup destination. |
| 89 |
- Improve wording of workstation backup email regarding the set number. |
Includes fix for disk usage broken with spaces. |
| 90 |
- Do not modify the workstation backup location 'SmbShare' during |
- Desktop Backup, allow user setting of compression level. |
| 91 |
software update. |
- Use Wake on LAN before starting Backup with DAR. |
| 92 |
- Include disk usage in Workstation Backup email. |
- NFS syntax is deprecated for CIFS mount. |
| 93 |
- A new database property, OpenFilesLimit, allows customisation of |
- Require cifs-utils and use UNC paths for cifs mount. |
| 94 |
open_files_limit option in my.cnf. This can allow backups to succeed |
- Improve text in console backup for success and failure. |
| 95 |
if a MySQL database has a very large number of tables. |
- Console USB Backup, allow user setting of compression level. |
| 96 |
- Restoring from a Workstation Backup showed a false failure. |
Compression level of the console backup is now -6 by default. |
| 97 |
- Workstation Backup emails include a To: header. |
- Patch to exclude trying to backup aquota.* files so that backups to tape will |
| 98 |
- Workstation Backup includes the system name and also indicates failure |
succeed. |
|
if applicable in the subject line of the email. |
|
|
- Update backup instructions in server-manager. |
|
|
- The Workstation Backup panel now removes leading and trailing spaces |
|
|
from the hostname. |
|
|
- Fix removal of leading slash in storage location. |
|
|
- The Workstation backup to USB panel no longer presents mounted disks. |
|
|
- Only define Workstation Backup temporary directory once. |
|
|
- Remove relocate_samba_file and all references to /etc/smbpasswd. |
|
|
- Improved upgrade compatibility, remove .orig |
|
|
- create mount point for verify |
|
|
- remove comment re smbpasswd being last |
|
|
- Fix mounting usb disks |
|
|
- Don't backup more than once per day |
|
|
- Fix full backup on Sunday diplayed as Everyday |
|
|
- Add more excludes for compressed filetypes |
|
|
- Porting Jean-Paul Leclere changes in the SME Server 7 tree to SME |
|
|
Server 8: |
|
|
- using credentials file for cifs mount |
|
|
- workstation backup: add cifs credentials expand to |
|
|
bootstrap-console-save |
|
|
- workstation backup: allow many backups in the same day |
|
|
- workstation restore: all needed backups must be available before |
|
|
restore |
|
|
- workstation verify: add option to check integrity of backups needed in |
|
|
a full restore |
|
|
- Fix DAR e-mail message with regards to incremental backups |
|
|
- Fix discrepancy in maximum compression level |
|
|
- Fix console backup from removable media |
|
|
- Fix console restore from removable media (Federico Simoncelli) |
|
|
- Auto-mount USB REV70-drive as usbdisk |
|
| 99 |
|
|
| 100 |
File Server |
File Server |
| 101 |
----------- |
----------- |
| 102 |
- Gracefully handle upgrades from SerNet Samba (SME7 TO SME8 VITH YUM) |
- Also remove the empty template-begin file in pam.d/proftpd templates. |
| 103 |
- Change separator character in general Samba configuration file. |
- Remove unused pam templates. |
| 104 |
- Changes in Samba's "Recycle VFS exclude" syntax (for ibays). |
- Replace vfs_shadow_copy with vfs_shadow_copy2 for shadow snapshots. |
| 105 |
- Use samba3x package for windows 7 compatibility. |
- Add template for wide links. |
| 106 |
- Remove require strong key part of regedit file. |
- Add templates for max protocol. |
| 107 |
- Backup all the samba tdb files. |
- Add support for Windows 8 domain joining & user login. |
| 108 |
- Add dependency /usr/bin/tdbbackup. |
- Add windows network performance enhancements registry file. |
| 109 |
- Create/remove V2 profile directories |
- Update default ServerName in 30smbServerName |
| 110 |
- Enable bindinterfaces by default |
- Add ability to configure waiting for network Win7 registry option. |
| 111 |
- Set recyle bin permissions |
- Change default Workgroup and Domain to sme-server. |
| 112 |
- Add registry file to server-resources to allow windows 7 to join Samba |
- Fix mod_sftp/mod_sftp_pam invalid pool allocation during kbdint |
| 113 |
3.x domains |
authentication. |
| 114 |
- Fix warnings in template expansion |
- Replace vfs_shadow_copy with vfs_shadow_copy2 for shadow snapshots. |
|
- Fix migrate fragments for samba |
|
| 115 |
|
|
| 116 |
LDAP (Optional in SME 8, and considered experimental) |
LDAP (Optional in SME 9.0, and considered experimental) |
| 117 |
---- |
---- |
| 118 |
- Create samba account during event for machine |
None |
|
- Keep uid/gid for computer accounts in synch for Unix/Samba/LDAP |
|
|
- Fixed syntax error in create-machine-account |
|
|
- Fix samba-group-mapping for users without group membership |
|
|
- Fix cpu critical patch missing ' |
|
|
- LDAP admin password needs to be loaded in secrets.tdb |
|
|
- Change authentication from passwd/shadow files to the pam database |
|
|
- Turba searches on LDAP address book fixed |
|
|
- Properly handle account with accents in first- or lastname with |
|
|
regards to LDAP |
|
|
- Fix create user gid parameter |
|
|
- Path for gpasswd command fixed in "init-accounts" script |
|
|
- All ibay account commands as system accounts in LDAP |
|
|
- Create ibay accounts as system accounts in LDAP |
|
|
- Use cpu commands to manage Ibays accounts if ldap is master |
|
|
- Make cpu calls critical only with ldap{Auth} is enabled |
|
|
- Check slapd.conf syntax before trying to dump the database |
|
|
- Simplify ldap-update call by calling ldif-fix |
|
|
- Change script order: ldap-update should be called after |
|
|
domain-group-maps |
|
|
- LDAP ou field is taken from Dept not Department |
|
|
- LDAP changes: Add rfc2739.schema back in and include in config |
|
|
- Use ldapmodify to load ldif, add -a if no changetype |
|
|
- Remove bogus junk attribute from ldif templates |
|
|
- Change startup order for ldap |
|
|
- ldap should store locked passwords for expired passwords |
|
|
- Add ldap as an auth type to radius |
|
|
- Radius should use LDAP backend (if LDAP auth is enabled) |
|
|
- Fix ldap-create errors when adding empty groups. |
|
|
- The LDAP information for admin was not being updated. |
|
|
- Don't try to save ibay password to LDAP. |
|
|
- Fix admin user password change (Daniel B.) |
|
|
- Init database if the ldif dump is empty (ie from sme8b) |
|
|
- revert re-init database |
|
|
- re-init readonly database on post-upgrade |
|
|
- Force SSL/TLS for remote authentication |
|
|
- reuse users_groups_ous.patch2 |
|
|
- Separate groups and users with mailboxRelatedObject |
|
|
- Set readonly access |
|
|
- Fix ldap-update action script to user-lock event |
|
|
- Add Groups entries |
|
|
- Add admin user as a standard user |
|
|
- Add ldap-update action script to user-lock event |
|
|
- Add ldap authentication and tls support |
|
|
- Update schema for newer openldap and remove calFBurl |
|
|
- Convert ldif dump |
|
|
- Create bdb log directory |
|
|
- Change ldap backend to bdb, and fix initialisation problem |
|
| 119 |
|
|
| 120 |
Localisation |
Localisation |
| 121 |
------------ |
------------ |
| 122 |
- Other fixes include updated translations for the existing languages. |
- Latest translations included. |
|
- Add Chinese (Taiwan) language (zh_TW). |
|
|
- Add Hebrew language (he). |
|
|
- Fix translation of local nic string in console. |
|
|
- Add Thai language |
|
|
- Add Polish language |
|
|
- Add Romanian language |
|
|
- Add Estonian language |
|
| 123 |
|
|
| 124 |
Mail Server |
Mail Server |
| 125 |
----------- |
----------- |
| 126 |
- Provide option to force the smtp proxy not to use CRAM-MD5 |
- Fetchmail multidrop mode follows TCPPort setting. |
| 127 |
config setprop smtp-auth-proxy PeerPort <port nr> |
- Always enable imap, listen on loopback is disabled. |
| 128 |
config setprop smtp-auth-proxy MD5Patch enabled |
- Avoid use of unitialised variables in smtp migrate fragments. |
| 129 |
- Fix mail to domain pseudonyms pointing to group with dot in name |
- Simplify qmail concurrency templates. |
| 130 |
- Fix Mail Log File Analysis reports |
- Modify domain style pseudonym pointing to user with dot in name. |
| 131 |
- Set SO_KEEPALIVE option on client socket to detect dead connections |
- Accept messages with no body and no trailing \n after headers. |
| 132 |
- Add template fragment for pyzor timeout |
- Fix Net::DNS update breaks qpsmtpd. |
| 133 |
- Remove spamd restart from bootstrap-console-save event |
- allows the spamassassin plugin to read the size limit from its |
| 134 |
- Require SMTP authentication by default when sending to an external |
arguments |
| 135 |
address. |
- Move clamscan scheduling to complete before 99-raid-check. |
| 136 |
- Fix TLS security defaults, TLS Ciphers for qpsmtpd can be configured. |
- Listen on loopback if disabled. |
| 137 |
- Change enabled to transparent for mail proxy. |
- Fix permissions on imapd.pem as it's used by pop3s. |
| 138 |
- Enable authentication for smtp traffic and migrate if necessary. |
- Do not obsolete bglibs, it's required for cvm. |
| 139 |
- Fix pseudonym modification for "local network only" accounts. |
- Allow plaintext (unless explicitly disabled). |
| 140 |
- Add smtp auth into web interface, not just when enabled. |
- Do not obsolete cvm, it's still needed for qpsmtpd. |
| 141 |
- Fix require_resolvable_fromhost doesn't work |
- Fix size_limit initialization. |
| 142 |
- Fix qpsmtpd plugin fatal errors when incoming mail message has no |
- reads MaxMessageSize prop of spamassassin and adds it |
| 143 |
headers. |
to the arguments of the plugin if defined. |
| 144 |
- Serialize configure_peers to prevent errors. |
- Requires e-smith-cvm-unix-local. |
| 145 |
- Fix SMTP proxy wording in server-manager. |
- Load TextCat plugin if ok_languages is enabled. |
| 146 |
- Fix SMTP auth wording in server-manager. |
- Fix how qpsmtpd tags spam email. |
|
- New feature: Allow for individual configuration for the number of |
|
|
mail logfiles. |
|
|
- Disable by default the SMTP transparent proxy, however upgrades from |
|
|
sme7 will retain old default behavior where SMTP connections will be |
|
|
transparently proxied. |
|
|
- Implement a database key (TlsBeforeAuth) to allow SMTP |
|
|
Authentication without TLS. The default remains to require TLS before |
|
|
Auth (introduced in SME 8Beta5). |
|
|
- Update qpsmtpd to 0.84 |
|
|
- Config setting to enable SMTP to ISP Authentication Debug now uses |
|
|
enabled/disabled for clarity. |
|
|
- Fix HeloHost patch. |
|
|
- Remove cron.daily jobs that are no longer needed. |
|
|
- Update email addresses on domain change. |
|
|
- Work around how qpsmtpd tags spam email. |
|
|
- Use HeloHost (if present) in smtp-auth-proxy.pl |
|
|
- Allow for changing SPAM subject tag through server-manager |
|
|
- Move creation of chrooted dev/urandom to spec-file |
|
|
- Create chroot dev/urandom for stunnel to use |
|
|
- Updated spec file to require php-pear(HTTP_Request) |
|
|
- SMTPSmartHost template incorrectly uses brackets to avoid MX lookups |
|
|
- smtproutes template incorrectly uses brackets to avoid MX lookups |
|
|
- Remove qmail-workaround and obsolete it after patch to treat 0.0.0.0 |
|
|
as a local ip |
|
|
- Remove spool and log dir from package (in smeserver-qpsmtpd) |
|
|
- Don't create smtpd user (unused in sme) |
|
|
- Apply qpsmtpd git changesets to implement custom SPAM subject prefix |
|
|
- Update pre requires so scripts don't fail on install |
|
|
- Rebase bad_rcptto patch to remove orig file |
|
|
- Change logging in tls init to prevent warnings |
|
|
- Only run/initialize plugins once |
|
|
- Change spool dir permissions and owner to qpsmtpd:clamav |
|
|
- Change log dir permissions and owner to smelog:smelog |
|
|
- don't add qpsmtpd to start-up by default |
|
|
- add apache config file to qpsmtpd-apache package |
|
|
- use rpm macros for dirs |
|
|
- use a filelist for main package instead of a long list of files |
|
|
- Setup logrotate for /var/log/clamd/clamscan.log |
|
|
- Remove create option from logrotate configuration |
|
|
- Setup logrotate for /var/log/clamd/smeserver-clamscan.log |
|
|
- Fix permissions on freshclam.conf file |
|
|
- Add HeuristicScanPrecedence option, default to yes |
|
|
- Obsolete e-smith-antivirus |
|
|
- Enable qpsmtpd RequireResolvableFromHost plugin by default, remove |
|
|
database entry and the database default value |
|
|
- Tie template fragment into event system to have it expanded |
|
|
- Add qpsmtpd template fragment for custom SPAM subject prefix |
|
|
- Remove FuzzyOcr |
|
|
- Run sa-update every two hours and check restart every hour |
|
|
- Redirect cron job output to logfile to avoid mail noise |
|
|
- Fix invalid service name in sa-update |
|
| 147 |
|
|
| 148 |
Server manager |
Server manager |
| 149 |
-------------- |
-------------- |
| 150 |
- Enhance IP address syntax checking in remote access panel. |
- Renew donation text in server-manager. |
| 151 |
- Improve the HTML formatting of the modify quota panel. |
- Do not load mod_ssl. |
| 152 |
- Remove empty <p> tag from footer template. |
- Remove log noise from Create starter web site panel. |
| 153 |
- Only display error messages intended for admin in server-manager |
- Add security fix for CVE-2013-4113. |
| 154 |
- Fix css validation errors. |
- Renew donation text and graphic in server-manager. |
| 155 |
- display reconfigure warning once if UnsavedChanges=yes |
- Update footer copyright and renew full copyright text. |
| 156 |
- Fix unitialized value errors in HTML.pm |
- Change wording of Software Update button. |
| 157 |
|
|
| 158 |
Webmail and Groupware |
Webmail and Groupware |
| 159 |
--------------------- |
--------------------- |
| 160 |
- Update to Horde 3.3.11, imp 4.3.9, Ingo 1.2.5 & Turba 2.3.5 |
- Don't use SSL over loopback. |
|
- Add option to verify from address in webmail if setting up additional |
|
|
identities. |
|
|
- Add the ability to have a local LDAP Group Address book. |
|
|
- Templated attributes.php to add ability to have multiple email |
|
|
values for a contact. Separate entries with a comma and a space. |
|
|
- Update to freebusy info in sources.php |
|
|
- Update to remove turbaContact info that SME is not using. |
|
|
- Change horde's templated mime_drivers.php file so some additional |
|
|
settings can be customized |
|
|
- Make sure username is always saved in lowercase to horde db's |
|
|
- Updated spec file to remove requires and obsoletes of |
|
|
php-pear-HTTP-Request information moved to e-smith-imp for both sme7 |
|
|
and sme8 |
|
|
- Update to Spec file to obsolete smeserver-trean < 0.1-8 |
|
|
- Patch to conf.php template to set a blank cookie domain so that FQDN |
|
|
and non-FQDN access to webmail will work. |
|
|
- Remove klutz template from registry.php |
|
|
- Template imp's mime_drivers.php file so some settings can be |
|
|
customized |
|
| 161 |
|
|
| 162 |
Web Server |
Web Server |
| 163 |
---------- |
---------- |
| 164 |
- Enable automatic redirection for /server-resources |
- Force magic_quotes Off. |
|
- Disable SSLv2 by default. |
|
|
- make user 'apache' an alias for user 'www'. |
|
|
- Default expose_php in php.ini to Off. |
|
|
- Add option to disable SSLv2 |
|
|
- Add OpenOffice2 MIME Types |
|
|
- Add OpenOffice MIME Types |
|
|
- Add XML MIME Type |
|
|
- Add Microsoft Office 2007 MIME types |
|
| 165 |
|
|
| 166 |
Other fixes and updates |
Other fixes and updates |
| 167 |
----------------------- |
----------------------- |
| 168 |
- Add MAC address into console network selection |
- Update the full names of users added in %pre. |
| 169 |
- Fix non-translated locale in ibays panel |
- Fix uid and gid to be the same for the users added in %pre. |
| 170 |
- Improve error message for quota |
- Changed Prereq to Requires(pre) as Prereq is deprecated. |
| 171 |
- Obsolete smeserver-php5-cgi & php-mcrypt |
- Patch to correct issue with not being able to access a password protected |
| 172 |
- Initialize ExternalInterface db structure so hwaddr in console works. |
ibay. |
| 173 |
- Option to select ext4 instead of ext3 for filesystems at boot prompt. |
- Update ServerName (Samba netbios name) when SystemName is updated. |
| 174 |
- Enable quotas on ext4 filesystems as well. |
- Remove old System Name from the Hosts DB. |
| 175 |
- Only allow backup to (removable) storage media that are not read only. |
- Fix group creation when LDAP auth is enabled. |
| 176 |
- Improve error handling when trying to install without NIC. |
- Disable IPv6 on a default install. |
| 177 |
- Only remove dangling symlinks in weak-updates directories. |
- Continue escaping control chars in rsyslog, just replace LF with space. |
| 178 |
- Fix template-expansion for dhclient.conf. |
- Use UTF-8 in the console. |
| 179 |
- Improve validation (error) message for remote access setup. |
- Remove redundant parts of init-accounts. |
| 180 |
- Change text in hostname and addresses panel for remote host (add |
- Add_template_to_ssl.pem, codes by JP Pialasse. |
| 181 |
FQDN). |
- Require diald. |
| 182 |
- Fix hostname editing for comments with double speechmarks |
- Removal of rc.e-smith now functionality is in e-smith-service. |
| 183 |
- Trap croak inside Net::IPv4Addr::ipv4_in_network to allow a FQDN to be |
- Replacement of rc.e-smith by moving code into e-smith-service. |
| 184 |
inserted in hostnames and addresses panel in lieu of an IP address. |
- Fix the way '.' works in bash. |
| 185 |
- Add validator back for ip or cname entry. |
- rename /etc/ldap.conf to /etc/pam_ldap.conf (and same for .secret). |
| 186 |
- Correctly strip numbers from sql scripts |
- Always define InternalInterface NICBonding. |
| 187 |
- Enable speedier time synchronisation for suspended VMs, this can be |
- In the console refer to removable media instead of USB disk. |
| 188 |
configured by a new db key for ntpd, SupportLargeDrift. |
- Fix a few more syslog => rsyslog items. |
| 189 |
- Set the TimeZone property earlier, so templates can rely on it. |
- Remove modprobe stuff. |
| 190 |
- Obsolete KeepAlive and replace by ClientAliveInterval and |
- Don't be as agressive on rate limiting. |
| 191 |
ClientAliveCountMax to prevent SSH sessions from being timed out by |
- Change syslog templates to rsyslog. |
| 192 |
network inactivity. |
- Ensure existing_hwaddr is always initialized. |
| 193 |
- New feature: Default Cipher to blowfish for ssh configuration. |
- Change System Name from mitel-networks-server to sme-server. |
| 194 |
- Add directive "PersistentPasswd off" to proftpd configuration. |
- Patch to remove symlink to Primary ibay from /home/e-smith/files/primary. |
| 195 |
- Quota panel should allow non-integers but only accept uppercase units. |
- Patch to correct issue with not being able to access a password protected |
| 196 |
- Obsolete magic_quotes_gpc settings. |
ibay. |
| 197 |
- Set default timezone for php version 5.3.3. |
- Correctly display accented letters in the console. |
| 198 |
- Handle no network interface scenario in console. |
- Add e-smith as a Requires(pre) and remove adding users in %pre. |
| 199 |
- Do not allow pool.ntp.org as NTP server. |
- Fix uid and gid to be the same in create-system-user. |
| 200 |
- Prepare for obsoletion of magic_quotes* when we supply PHP 5.3.0+ |
- Ignore mysql.event table. |
| 201 |
- Fix missing space causing errors parsing the iptables rules. |
- Use --single-transaction in mysql-dump-tables. |
| 202 |
- Migrate MirrorList properties to sme8 repos. |
- Use mysql_upgrade instead of fix_privilege_tables. |
| 203 |
- Remove BaseURL properties if migrating to sme8 repos. |
- Increase memory limit for ntp. |
| 204 |
- Remove yum databases and repodata if migrating to sme8 repos. |
- Make rsyslog listen to our socket. |
| 205 |
- Enable cpuspeed by default. |
- Remove rc.quota_create. |
| 206 |
- Fix scriplet error in e-smith-service script when service is disabled. |
- the config file is radiusclient.conf, not radiusclient-ng.conf. |
| 207 |
- Allow use of CNAME in remote hosts. |
- Add templates for radiusclient-ng.conf file to remove binaddr |
| 208 |
- Add Obsoletes for php5-cgi-{imap,ldap,mysql,pear,xmlrpc}. |
directive. |
| 209 |
- Restate smartd dependency. |
- Add directive to options.pptpd so that radius plugin can find the |
| 210 |
- Fix gettext errors in WAN/LAN subnet error message |
radiusclient configuration file.. |
| 211 |
- Improve security by using SHA1 algorithm for certificate signing |
- Fix permissions of /etc/radiusclient-ng/servers. |
| 212 |
- Fix eth? swapping |
- Add hack for running rc7.d script during runlevel 4. |
| 213 |
- Bump certificate encryption from 1024 bits to 2048 bits |
- Apply SME Server config file changes to pwauth. |
| 214 |
- Add a dummy call so xgettext can pull translated $ifName in console |
- Fix libgomp obsoletes to not obsolete el6 version. |
| 215 |
configuration pages. |
- Change order of mail options in check4updates. |
| 216 |
- Translate $ifName in console configuration pages |
- Fix parsing issues with "manage RAID" menu option in the console. |
| 217 |
- Prevent IP conflicts between local and external interface in server |
- Remove SSH v1 legacy support. |
| 218 |
gateway mode |
- Support nolvm boot option. |
| 219 |
- Clean up: remove unused nonetworkdrivers |
- Create degraded RAID1 array with single disk install. |
| 220 |
- Clean up stray symlinks in /lib/modules before depmod |
- nodmraid is the default for SME 9.0 installs. |
| 221 |
- Allow for different mdadm output formats for DeviceSize |
- Give more time to the grub menu. |
| 222 |
- Add compiled python files to the packaged files list |
- Update installer hard drive warning. |
| 223 |
- Update path for 64-bit compatibility |
- Customize confirmation dialogs during fresh install. |
| 224 |
- Remove hiddenmenu entry from grub.conf |
- Run installer in 'text' mode. |
|
- adds the hwaddr parameter to probeAdapters() |
|
|
- Update path for 64-bit compatibility |
|
|
- Add patch (Federico Simoncelli) to prevent re-use of uids |
|
|
- Fix log-error detection algorithm |
|
|
- Fix another instance of ups model for new version of nut |
|
|
- Template sshd login grace time, kept default at 600s |
|
|
- Enable port forwards to localhost if mode is serveronly |
|
|
- Adjust xml entry in locale |
|
|
- Add option to limit port forwards from source ip |
|
|
- Remove unnecessary Mount Proc line |
|
|
- Fix owner/perms for radius files |
|
|
- Fix typo in /sbin/service patch (Federico Simoncelli) |
|
|
- Exit with zero exit status for services not listed in configuration |
|
|
database to avoid failures in post scriptlets |
|
|
- Merge in SME Server /sbin/e-smith/service wrapper so that only |
|
|
initscripts which exist in run-level 7 can be run. This ensures that |
|
|
the supervised service is run, if one exists, and protects against |
|
|
running "service httpd restart" |
|
|
- Add requires on e-smith-lib so www user is created first |
|
|
- Fix regular expression to actually replace the colon with a dot |
|
|
- Remove the leading path for yum in newrpms |
|
|
- only unlink file if we created it |
|
|
- Import only keys not already imported |
|
|
- set unsaved changes in yum event |
|
|
- move yum warming to sme yum plugin |
|
|
- ensure file exists before unlinking |
|
|
- remove semicolons from yum plugin |
|
|
- Add frequency of updates toggle |
|
|
- Add /etc/yum.smerepos.d to package |
|
|
- Change SME mirrorlists to point to ibiblio |
|
|
- Require mailx |
|
|
- Add yum-protect-packages support to prevent removal of needed pacakges |
|
| 225 |
|
|
| 226 |
General features |
General features |
| 227 |
================ |
================ |
| 228 |
|
|
| 229 |
- Based on CentOS 5.8 and all available updates |
- Based on CentOS 6.4 and all available updates |
| 230 |
|
|
| 231 |
|
$Id: README.txt,v 1.4 2013/10/12 06:31:51 wellsi Exp $ |
| 232 |
|
|
| 233 |
|
|
|
$Id: README.txt,v 1.15 2012/05/22 07:46:08 wellsi Exp $ |
|
| 234 |
|
|
| 235 |
|
|
| 236 |
|
|
Parent Directory
| 
Revision Log
| 
Revision Graph
| 
Patch
