cdrom.image/updates/raidconvert

#!/bin/sh
set -x

# exec 2>&1 >/tmp/raidconvert.out

exec 2>&1 

# let's assume it's a SCSI system
if grep -q 'sda$' /proc/partitions; then
    disk=sda
else
    # No SCSI Drives is must be IDE
    media=`cat /proc/ide/hda/media`
    if [ $media == "disk" ] ; then
        disk=hda
    fi
fi

set $disk
found=`echo $#`
if [ $found -gt "0" ] ; then
    # Dump out current partitions
    sfdisk -d /dev/$disk > /tmp/oldparts

    # Check if we have any ext2/3 or swap partitions
    if grep -q 'Id=8[23]' /tmp/oldparts; then
        echo -en "\n\nConverting partitions to RAID..." >/dev/tty3
        # Convert ext2/3 and swap partitions to raid autodetect
        sed 's/Id=8[32]/Id=fd/' /tmp/oldparts > /tmp/newparts

        # Find swap partition for future checks
        swap=`grep 'Id=82' /tmp/oldparts | sed "s/$disk\([0-9]\+\) :.*/md\1/"`

        # Loop throught partitions and convert to degraded raid1
        for part in `grep 'Id=8[23]' /tmp/oldparts | sed 's/ :.*//'`; do
            mdpart=`echo $part | sed "s/$disk\([0-9]\+\)/md\1/"`
        
            echo -n "$part..." >/dev/tty3
            mdadm --create $mdpart --run --level=1 --raid-devices=2 $part missing
            if [ "$mdpart" == "$swap" ]; then
                # Recreate swap partition
                mkswap $swap
            else
                # Resize ext2/3 partitions (fix superblock - part 1)
                resize2fs -f $mdpart
            fi
        done

        echo "done" >/dev/tty3

        # Write out new converted partition table
        sfdisk --force /dev/$disk < /tmp/newparts

        echo -e "\nChecking filesystems on converted partitions. This may take a while." >/dev/tty3

        mkdir /mnt/tmp
        for part in `grep 'Id=fd' /tmp/newparts | sed "s/$disk\([0-9]\+\) :.*/md\1/"`; do
            if [ "$part" != "$swap" ]; then
                # Resize ext2/3 partitions (fix superblock - part 2)
                echo -e "\n\nChecking $part..." >/dev/tty3
                e2fsck -f -C0 $part >/dev/tty3

                # Check for /etc/fstab on partitions and convert entries
                mount $part /mnt/tmp
                if [ -r /mnt/tmp/etc/fstab ]; then
                    # XXX - FIXME - unportable hack for fstab. 
                    # Only works for 6.x I suspect
                    cat /mnt/tmp/etc/fstab | sed "s/$disk\([0-9]\+\)/md\1/" | \
                        sed -e "s:LABEL=/boot1:/dev/md1:" | \
                        sed -e "s:LABEL=/:/dev/md3:" \
                        > /mnt/tmp/etc/fstab.tmp
                    mv /mnt/tmp/etc/fstab.tmp /mnt/tmp/etc/fstab
                fi
                umount /mnt/tmp
            fi
        done
        rmdir /mnt/tmp
        mdadm --stop --scan
    fi
fi
1	growell	1.1	#!/bin/sh
2			set -x
3
4			# exec 2>&1 >/tmp/raidconvert.out
5
6			exec 2>&1
7
8			# let's assume it's a SCSI system
9			if grep -q 'sda$' /proc/partitions; then
10			disk=sda
11			else
12			# No SCSI Drives is must be IDE
13			media=`cat /proc/ide/hda/media`
14			if [ $media == "disk" ] ; then
15			disk=hda
16			fi
17			fi
18
19			set $disk
20			found=`echo $#`
21			if [ $found -gt "0" ] ; then
22			# Dump out current partitions
23			sfdisk -d /dev/$disk > /tmp/oldparts
24
25			# Check if we have any ext2/3 or swap partitions
26			if grep -q 'Id=8[23]' /tmp/oldparts; then
27			echo -en "\n\nConverting partitions to RAID..." >/dev/tty3
28			# Convert ext2/3 and swap partitions to raid autodetect
29			sed 's/Id=8[32]/Id=fd/' /tmp/oldparts > /tmp/newparts
30
31			# Find swap partition for future checks
32			swap=`grep 'Id=82' /tmp/oldparts \| sed "s/$disk\([0-9]\+\) :.*/md\1/"`
33
34			# Loop throught partitions and convert to degraded raid1
35			for part in `grep 'Id=8[23]' /tmp/oldparts \| sed 's/ :.*//'`; do
36			mdpart=`echo $part \| sed "s/$disk\([0-9]\+\)/md\1/"`
37
38			echo -n "$part..." >/dev/tty3
39			mdadm --create $mdpart --run --level=1 --raid-devices=2 $part missing
40			if [ "$mdpart" == "$swap" ]; then
41			# Recreate swap partition
42			mkswap $swap
43			else
44			# Resize ext2/3 partitions (fix superblock - part 1)
45			resize2fs -f $mdpart
46			fi
47			done
48
49			echo "done" >/dev/tty3
50
51			# Write out new converted partition table
52			sfdisk --force /dev/$disk < /tmp/newparts
53
54			echo -e "\nChecking filesystems on converted partitions. This may take a while." >/dev/tty3
55
56			mkdir /mnt/tmp
57			for part in `grep 'Id=fd' /tmp/newparts \| sed "s/$disk\([0-9]\+\) :.*/md\1/"`; do
58			if [ "$part" != "$swap" ]; then
59			# Resize ext2/3 partitions (fix superblock - part 2)
60			echo -e "\n\nChecking $part..." >/dev/tty3
61			e2fsck -f -C0 $part >/dev/tty3
62
63			# Check for /etc/fstab on partitions and convert entries
64			mount $part /mnt/tmp
65			if [ -r /mnt/tmp/etc/fstab ]; then
66	growell	1.2	# XXX - FIXME - unportable hack for fstab.
67			# Only works for 6.x I suspect
68			cat /mnt/tmp/etc/fstab \| sed "s/$disk\([0-9]\+\)/md\1/" \| \
69			sed -e "s:LABEL=/boot1:/dev/md1:" \| \
70			sed -e "s:LABEL=/:/dev/md3:" \
71			> /mnt/tmp/etc/fstab.tmp
72	growell	1.1	mv /mnt/tmp/etc/fstab.tmp /mnt/tmp/etc/fstab
73			fi
74			umount /mnt/tmp
75			fi
76			done
77			rmdir /mnt/tmp
78	growell	1.3	mdadm --stop --scan
79	growell	1.1	fi
80			fi