| 1 |
# -*- Makefile -*- |
| 2 |
# |
| 3 |
# Common Makefile for building RPMs |
| 4 |
# Licensed under the new-BSD license (http://www.opensource.org/licenses/bsd-license.php) |
| 5 |
# Copyright (C) 2004-2005 Red Hat, Inc. |
| 6 |
# Copyright (C) 2005 Fedora Foundation |
| 7 |
# |
| 8 |
# $Id: Makefile.common,v 1.14 2009/10/12 21:02:01 slords Exp $ |
| 9 |
|
| 10 |
# Define the common dir. |
| 11 |
# This needs to happen first. |
| 12 |
define find-common-dir |
| 13 |
for d in common ../common ../../common ; do if [ -f $$d/Makefile.common ] ; then echo "$$d"; break ; fi ; done |
| 14 |
endef |
| 15 |
COMMON_DIR := $(shell $(find-common-dir)) |
| 16 |
|
| 17 |
# Branch and disttag definitions |
| 18 |
# These need to happen second. |
| 19 |
ifndef HEAD_BRANCH |
| 20 |
HEAD_BRANCH := devel |
| 21 |
endif |
| 22 |
BASEDIR := $(shell basename `pwd`) |
| 23 |
BRANCH := $(BASEDIR) |
| 24 |
BRANCHINFO = $(shell grep ^$(BRANCH): $(COMMON_DIR)/branches | cut -d: --output-delimiter=" " -f2-) |
| 25 |
TARGET := $(word 1, $(BRANCHINFO)) |
| 26 |
DIST = $(word 2, $(BRANCHINFO)) |
| 27 |
DISTVAR = $(word 3, $(BRANCHINFO)) |
| 28 |
DISTVAL = $(word 4, $(BRANCHINFO)) |
| 29 |
DISTDEF = $(shell echo $(DIST) | sed -e s/^\\\.// ) |
| 30 |
SMEVAL = $(word 5, $(BRANCHINFO)) |
| 31 |
DIST_DEFINES = --define "dist $(DIST)" --define "$(DISTVAR) $(DISTVAL)" --define "$(DISTDEF) 1" --define "sme $(SMEVAL)" |
| 32 |
|
| 33 |
BUILD_FLAGS ?= $(KOJI_FLAGS) |
| 34 |
|
| 35 |
LOCALARCH := $(if $(shell grep -i '^BuildArch:.*noarch' $(SPECFILE)), noarch, $(shell uname -m)) |
| 36 |
|
| 37 |
## a base directory where we'll put as much temporary working stuff as we can |
| 38 |
ifndef WORKDIR |
| 39 |
WORKDIR := $(shell pwd) |
| 40 |
endif |
| 41 |
## of course all this can also be overridden in your RPM macros file, |
| 42 |
## but this way you can separate your normal RPM setup from your CVS |
| 43 |
## setup. Override RPM_WITH_DIRS in ~/.cvspkgsrc to avoid the usage of |
| 44 |
## these variables. |
| 45 |
SRCRPMDIR ?= $(WORKDIR) |
| 46 |
BUILDDIR ?= $(WORKDIR) |
| 47 |
RPMDIR ?= $(WORKDIR) |
| 48 |
MOCKDIR ?= $(WORKDIR) |
| 49 |
MOCKCFG ?= smeserver-$(SMEVAL)-$(BUILDARCH)-base |
| 50 |
## SOURCEDIR is special; it has to match the CVS checkout directory, |
| 51 |
## because the CVS checkout directory contains the patch files. So it basically |
| 52 |
## can't be overridden without breaking things. But we leave it a variable |
| 53 |
## for consistency, and in hopes of convincing it to work sometime. |
| 54 |
ifndef SOURCEDIR |
| 55 |
SOURCEDIR := $(shell pwd) |
| 56 |
endif |
| 57 |
ifndef SPECDIR |
| 58 |
SPECDIR := $(shell pwd) |
| 59 |
endif |
| 60 |
|
| 61 |
ifndef RPM_DEFINES |
| 62 |
RPM_DEFINES := --define "_sourcedir $(SOURCEDIR)" \ |
| 63 |
--define "_specdir $(SPECDIR)" \ |
| 64 |
--define "_builddir $(BUILDDIR)" \ |
| 65 |
--define "_srcrpmdir $(SRCRPMDIR)" \ |
| 66 |
--define "_rpmdir $(RPMDIR)" \ |
| 67 |
$(DIST_DEFINES) |
| 68 |
endif |
| 69 |
|
| 70 |
# Initialize the variables that we need, but are not defined |
| 71 |
# the version of the package |
| 72 |
VER_REL := $(shell rpm $(RPM_DEFINES) $(DIST_DEFINES) -q --qf "%{VERSION} %{RELEASE}\n" --specfile $(SPECFILE)| head -1) |
| 73 |
ifndef NAME |
| 74 |
$(error "You can not run this Makefile without having NAME defined") |
| 75 |
endif |
| 76 |
ifndef VERSION |
| 77 |
VERSION := $(word 1, $(VER_REL)) |
| 78 |
endif |
| 79 |
# the release of the package |
| 80 |
ifndef RELEASE |
| 81 |
RELEASE := $(word 2, $(VER_REL)) |
| 82 |
endif |
| 83 |
# this is used in make patch, maybe make clean eventually. |
| 84 |
# would be nicer to autodetermine from the spec file... |
| 85 |
RPM_BUILD_DIR ?= $(BUILDDIR)/$(NAME)-$(VERSION) |
| 86 |
|
| 87 |
# default target: just make sure we've got the sources |
| 88 |
all: sources |
| 89 |
|
| 90 |
# user specific configuration |
| 91 |
CVS_EXTRAS_RC := $(shell if test -f $(HOME)/.cvspkgsrc ; then echo $(HOME)/.cvspkgsrc ; fi) |
| 92 |
ifdef CVS_EXTRAS_RC |
| 93 |
include $(CVS_EXTRAS_RC) |
| 94 |
endif |
| 95 |
|
| 96 |
# The repository and the clients we use for the files |
| 97 |
REPOSITORY ?= http://lordsfam.net/yum/smeserver/builds/source |
| 98 |
UPLOAD_REPOSITORY ?= /builds/source |
| 99 |
|
| 100 |
# We define CURL and WGET in a way that makes if possible to have them |
| 101 |
# overwritten from the module's Makefiles. Then CLIENT picks CURL, otherwise WGET |
| 102 |
CURL ?= $(shell if test -f /usr/bin/curl ; then echo "curl -H Pragma: -O -R -S --fail --show-error" ; fi) |
| 103 |
WGET ?= $(shell if test -f /usr/bin/wget ; then echo "wget -nd -m" ; fi) |
| 104 |
CLIENT ?= $(if $(CURL),$(CURL),$(if $(WGET),$(WGET))) |
| 105 |
PLAGUE_CLIENT ?= $(shell which plague-client 2>/dev/null) |
| 106 |
BUILD_CLIENT ?= $(shell which koji 2>/dev/null) |
| 107 |
BODHI_CLIENT ?= $(shell which bodhi 2>/dev/null) |
| 108 |
|
| 109 |
# RPM with all the overrides in place; you can override this in your |
| 110 |
# .cvspkgsrc also, to use a default rpm setup |
| 111 |
# the rpm build command line |
| 112 |
ifndef RPM |
| 113 |
RPM := rpmbuild |
| 114 |
endif |
| 115 |
ifndef RPM_WITH_DIRS |
| 116 |
RPM_WITH_DIRS = $(RPM) $(RPM_DEFINES) |
| 117 |
endif |
| 118 |
|
| 119 |
# CVS-safe version/release -- a package name like 4Suite screws things |
| 120 |
# up, so we have to remove the leaving digits from the name |
| 121 |
TAG_NAME := $(shell echo $(NAME) | sed -e s/\\\./_/g -e s/^[0-9]\\\+//g) |
| 122 |
TAG_VERSION := $(shell echo $(VERSION) | sed s/\\\./_/g) |
| 123 |
TAG_RELEASE := $(shell echo $(RELEASE) | sed s/\\\./_/g) |
| 124 |
|
| 125 |
# tag to export, defaulting to current tag in the spec file |
| 126 |
TAG?=$(TAG_NAME)-$(TAG_VERSION)-$(TAG_RELEASE) |
| 127 |
|
| 128 |
# where to cvs export temporarily |
| 129 |
TMPCVS := $(WORKDIR)/cvs-$(TAG) |
| 130 |
|
| 131 |
# source file basenames |
| 132 |
SOURCEFILES := $(shell cat sources 2>/dev/null | awk '{ print $$2 }') |
| 133 |
# full path to source files |
| 134 |
FULLSOURCEFILES := $(addprefix $(SOURCEDIR)/,$(SOURCEFILES)) |
| 135 |
|
| 136 |
# retrieve the stored md5 sum for a source download |
| 137 |
define get_sources_md5 |
| 138 |
$(shell cat sources 2>/dev/null | while read m f ; do if test "$$f" = "$@" ; then echo $$m ; break ; fi ; done) |
| 139 |
endef |
| 140 |
|
| 141 |
# list the possible targets for valid arches |
| 142 |
ARCHES = noarch i386 i586 i686 x86_64 # ia64 s390 s390x ppc ppc64 pseries ppc64pseries iseries ppc64iseries athlon alpha alphaev6 sparc sparc64 sparcv9 sparcv9v sparc64v i164 mac sh mips geode |
| 143 |
|
| 144 |
# for the modules that do different "make prep" depending on what arch we build for |
| 145 |
PREP_ARCHES = $(addprefix prep-,$(ARCHES)) |
| 146 |
|
| 147 |
## list all our bogus targets |
| 148 |
.PHONY :: $(ARCHES) commit sources uploadsource upload export check build-check plague koji build cvsurl chain-build test-srpm srpm tag force-tag verrel new clean patch prep compile install install-short compile-short FORCE local scratch-build scratch-build-% |
| 149 |
|
| 150 |
# The TARGETS define is meant for local module targets that should be |
| 151 |
# made in addition to the SOURCEFILES whenever needed |
| 152 |
TARGETS ?= |
| 153 |
|
| 154 |
# default target - retrieve the sources and make the module specific targets |
| 155 |
sources: $(SOURCEFILES) $(TARGETS) |
| 156 |
|
| 157 |
# Retrieve the sources we do not have in CVS |
| 158 |
$(SOURCEFILES): #FORCE |
| 159 |
@mkdir -p $(SOURCEDIR) |
| 160 |
@echo "Downloading $@..." |
| 161 |
@for i in `find ../ -maxdepth 2 -name "$@"`; do \ |
| 162 |
if test "$$(md5sum $$i | awk '{print $$1}')" = "$(get_sources_md5)" ; then \ |
| 163 |
echo "Copying from $$i" ; \ |
| 164 |
ln $$i $@ ; \ |
| 165 |
break ; \ |
| 166 |
fi ; \ |
| 167 |
done |
| 168 |
@if [ -z "$(CLIENT)" ]; then echo "Can't download, need curl or wget installed." ; exit 1; fi |
| 169 |
@if [ ! -e "$@" ] ; then $(CLIENT) $(REPOSITORY)/$(get_sources_md5)/$@ ; fi |
| 170 |
@if [ ! -e "$@" ] ; then echo "Could not download source file: $@ does not exist" ; exit 1 ; fi |
| 171 |
@if test "$$(md5sum $@ | awk '{print $$1}')" != "$(get_sources_md5)" ; then \ |
| 172 |
echo "md5sum of the downloaded $@ does not match the one from 'sources' file" ; \ |
| 173 |
echo "Local copy: $$(md5sum $@)" ; \ |
| 174 |
echo "In sources: $$(grep $@ sources)" ; \ |
| 175 |
exit 1 ; \ |
| 176 |
else \ |
| 177 |
ls -l $@ ; \ |
| 178 |
fi |
| 179 |
|
| 180 |
# Support for uploading stuff into the repository. |
| 181 |
ifdef FILES |
| 182 |
|
| 183 |
upload-file = echo -F "name=$(NAME)" -F "md5sum=$${m%%[[:space:]]*}" -F "file=@$$f" $(UPLOAD_REPOSITORY) |
| 184 |
|
| 185 |
define upload-request |
| 186 |
echo "Checking : $$b on $(UPLOAD_REPOSITORY)..." ; \ |
| 187 |
if test -f "$(UPLOAD_REPOSITORY)/$${m%%[[:space:]]*}/$$f"; then \ |
| 188 |
echo "This file ($$m) is already uploaded" ; \ |
| 189 |
else \ |
| 190 |
echo "Uploading: $$b to $(UPLOAD_REPOSITORY)..." ; \ |
| 191 |
mkdir -p "$(UPLOAD_REPOSITORY)/$${m%%[[:space:]]*}" || exit 1 ; \ |
| 192 |
ln -f "$$f" "$(UPLOAD_REPOSITORY)/$${m%%[[:space:]]*}/$$f" 2> /dev/null || cp -f "$$f" "$(UPLOAD_REPOSITORY)/$${m%%[[:space:]]*}/$$f" || exit 1 ; \ |
| 193 |
fi |
| 194 |
endef |
| 195 |
|
| 196 |
# Upload the FILES, adding to the ./sources manifest |
| 197 |
upload: $(FILES) |
| 198 |
@if ! test -f ./sources ; then touch ./sources ; fi |
| 199 |
@if ! test -f ./.cvsignore ; then touch ./.cvsignore ; fi |
| 200 |
@for f in $(FILES); do \ |
| 201 |
if ! test -s $$f ; then echo "SKIPPING EMPTY FILE: $$f" ; continue ; fi ; \ |
| 202 |
b="$$(basename $$f)" ; \ |
| 203 |
m="$$(cd $$(dirname $$f) && md5sum $$b)" ; \ |
| 204 |
if test "$$m" = "$$(grep $$b sources)" ; then \ |
| 205 |
echo "ERROR: file $$f is already listed in the sources file..." ; \ |
| 206 |
exit 1 ; \ |
| 207 |
fi ; \ |
| 208 |
chmod +r $$f ; \ |
| 209 |
echo ; $(upload-request) ; echo ; \ |
| 210 |
if test -z "$$(egrep ""[[:space:]]$$b$$"" sources)" ; then \ |
| 211 |
echo "$$m" >> sources ; \ |
| 212 |
else \ |
| 213 |
egrep -v "[[:space:]]$$b$$" sources > sources.new ; \ |
| 214 |
echo "$$m" >> sources.new ; \ |
| 215 |
mv sources.new sources ; \ |
| 216 |
fi ; \ |
| 217 |
if test -z "$$(egrep ""^$$b$$"" .cvsignore)" ; then \ |
| 218 |
echo $$b >> .cvsignore ; \ |
| 219 |
fi \ |
| 220 |
done |
| 221 |
@if grep "^/sources/" CVS/Entries >/dev/null; then true ; else cvs -Q add sources; fi |
| 222 |
@echo "Source upload succeeded. Don't forget to commit the new ./sources file" |
| 223 |
@cvs update sources .cvsignore |
| 224 |
|
| 225 |
# Upload FILES and recreate the ./sources file to include only these FILES |
| 226 |
new-source new-sources: $(FILES) |
| 227 |
@rm -f sources && touch sources |
| 228 |
@rm -f .cvsignore && touch .cvsignore |
| 229 |
@for f in $(FILES); do \ |
| 230 |
if ! test -s $$f ; then echo "SKIPPING EMPTY FILE: $$f" ; continue ; fi ; \ |
| 231 |
b="$$(basename $$f)" ; \ |
| 232 |
m="$$(cd $$(dirname $$f) && md5sum $$b)" ; \ |
| 233 |
chmod +r $$f ; \ |
| 234 |
echo ; $(upload-request) ; echo ; \ |
| 235 |
echo "$$m" >> sources ; \ |
| 236 |
echo "$$b" >> .cvsignore ; \ |
| 237 |
done |
| 238 |
@if grep "^/sources/" CVS/Entries >/dev/null; then true ; else cvs -Q add sources; fi |
| 239 |
@echo "Source upload succeeded. Don't forget to commit the new ./sources file" |
| 240 |
@cvs update sources .cvsignore |
| 241 |
endif |
| 242 |
|
| 243 |
# allow overriding buildarch so you can do, say, an i386 build on x86_64 |
| 244 |
ifndef BUILDARCH |
| 245 |
BUILDARCH := $(shell rpm --eval "%{_arch}") |
| 246 |
endif |
| 247 |
|
| 248 |
# test build in mock |
| 249 |
mockbuild : srpm |
| 250 |
mock $(MOCKARGS) -r $(MOCKCFG) --resultdir=$(MOCKDIR)/$(TAG) rebuild $(SRCRPMDIR)/$(NAME)-$(VERSION)-$(RELEASE).src.rpm |
| 251 |
|
| 252 |
# check the build with rpmlint |
| 253 |
lint: |
| 254 |
@test -e $(NAME)-$(VERSION)-$(RELEASE).src.rpm || (echo "run 'make local' first" ; exit 1 ) |
| 255 |
rpmlint $(NAME)-$(VERSION)-$(RELEASE).src.rpm $(LOCALARCH)/*-$(VERSION)-$(RELEASE).$(LOCALARCH).rpm |
| 256 |
|
| 257 |
# build for a particular arch |
| 258 |
$(ARCHES) : sources $(TARGETS) |
| 259 |
$(RPM_WITH_DIRS) --target $@ -ba $(SPECFILE) 2>&1 | tee .build-$(VERSION)-$(RELEASE).log ; exit $${PIPESTATUS[0]} |
| 260 |
|
| 261 |
# empty target to force checking of md5sums in FULLSOURCEFILES |
| 262 |
FORCE: |
| 263 |
|
| 264 |
# build whatever's appropriate for the local architecture |
| 265 |
local: $(LOCALARCH) |
| 266 |
|
| 267 |
# attempt to apply all the patches, optionally only for a particular arch |
| 268 |
ifdef PREPARCH |
| 269 |
prep: sources $(TARGETS) |
| 270 |
$(RPM_WITH_DIRS) --nodeps -bp --target $(PREPARCH) $(SPECFILE) |
| 271 |
else |
| 272 |
prep: sources $(TARGETS) |
| 273 |
$(RPM_WITH_DIRS) --nodeps -bp $(SPECFILE) |
| 274 |
endif |
| 275 |
|
| 276 |
# this allows for make prep-i686, make prep-ppc64, etc |
| 277 |
prep-% : Makefile |
| 278 |
$(MAKE) prep PREPARCH=$* |
| 279 |
|
| 280 |
compile: sources $(TARGETS) |
| 281 |
$(RPM_WITH_DIRS) -bc $(SPECFILE) |
| 282 |
|
| 283 |
install: sources $(TARGETS) |
| 284 |
$(RPM_WITH_DIRS) -bi $(SPECFILE) |
| 285 |
|
| 286 |
compile-short: sources $(TARGETS) |
| 287 |
$(RPM_WITH_DIRS) --nodeps --short-circuit -bc $(SPECFILE) |
| 288 |
|
| 289 |
install-short: sources $(TARGETS) |
| 290 |
$(RPM_WITH_DIRS) --nodeps --short-circuit -bi $(SPECFILE) |
| 291 |
|
| 292 |
CVS_ROOT := $(shell if [ -f CVS/Root ] ; then cat CVS/Root ; fi) |
| 293 |
CVS_REPOSITORY := $(shell if [ -f CVS/Repository ] ; then cat CVS/Repository ; fi) |
| 294 |
CVS_URL := cvs://smeserver.cvs.sourceforge.net:/cvsroot/smeserver?$(CVS_REPOSITORY)\#$(TAG) |
| 295 |
|
| 296 |
## create a clean exported copy in $(TMPCVS) |
| 297 |
export:: sources |
| 298 |
@mkdir -p $(WORKDIR) |
| 299 |
/bin/rm -rf $(TMPCVS) |
| 300 |
@if test -z "$(TAG)" ; then echo "Must specify a tag to check out" ; exit 1; fi |
| 301 |
@mkdir -p $(TMPCVS) |
| 302 |
@cd $(TMPCVS) && \ |
| 303 |
cvs -Q -d $(CVS_ROOT) export -r$(TAG) -d $(NAME) $(CVS_REPOSITORY) && \ |
| 304 |
cvs -Q -d $(CVS_ROOT) export -rHEAD common |
| 305 |
@if [ -n "$(FULLSOURCEFILES)" ]; then ln -f $(FULLSOURCEFILES) $(TMPCVS)/$(NAME) 2> /dev/null || cp -f $(FULLSOURCEFILES) $(TMPCVS)/$(NAME) ; fi |
| 306 |
@echo "Exported $(TMPCVS)/$(NAME)" |
| 307 |
|
| 308 |
## build a test-srpm and see if it will -bp on all arches |
| 309 |
# XXX: I am not sure exactly what this is supposed to really do, since the |
| 310 |
# query format returns (none) most of the time, and that is not |
| 311 |
# handled --gafton |
| 312 |
check: test-srpm |
| 313 |
@archs=`rpm -qp $(SRCRPMDIR)/$(NAME)-$(VERSION)-$(RELEASE).src.rpm --qf "[%{EXCLUSIVEARCH}\n]" | egrep -v "(i586)|(i686)|(athlon)"` ;\ |
| 314 |
if test -z "$$archs"; then archs=noarch; fi ; \ |
| 315 |
echo "Checking arches: $$archs" ; \ |
| 316 |
for arch in $$archs; do \ |
| 317 |
echo "Checking $$arch..."; \ |
| 318 |
if ! $(RPM_WITH_DIRS) -bp --target $$arch $(SPECFILE); then \ |
| 319 |
echo "*** make prep failed for $$arch"; \ |
| 320 |
exit 1; \ |
| 321 |
fi; \ |
| 322 |
done; |
| 323 |
|
| 324 |
## use this to build an srpm locally |
| 325 |
srpm: sources $(TARGETS) |
| 326 |
$(RPM_WITH_DIRS) $(DIST_DEFINES) --nodeps -bs $(SPECFILE) |
| 327 |
|
| 328 |
test-srpm: srpm |
| 329 |
|
| 330 |
verrel: |
| 331 |
@echo $(NAME)-$(VERSION)-$(RELEASE) |
| 332 |
|
| 333 |
# If you build a new version into the tree, first do "make tag", |
| 334 |
# then "make srpm", then build the package. |
| 335 |
tag:: $(SPECFILE) $(COMMON_DIR)/branches |
| 336 |
cvs tag $(TAG_OPTS) -c $(TAG) |
| 337 |
@echo "Tagged with: $(TAG)" |
| 338 |
@echo |
| 339 |
|
| 340 |
force-tag: $(SPECFILE) $(COMMON_DIR)/branches |
| 341 |
@$(MAKE) tag TAG_OPTS="-F $(TAG_OPTS)" |
| 342 |
|
| 343 |
define find-user |
| 344 |
if [ `cat CVS/Root |grep -c [^:]@` -ne 0 ]; then cat CVS/Root |cut -d @ -f 1 | sed 's/:.*://' ; else echo $(USER); fi |
| 345 |
endef |
| 346 |
USER := $(shell $(find-user)) |
| 347 |
|
| 348 |
oldbuild: $(COMMON_DIR)/branches |
| 349 |
@if [ -z "$(TARGET)" -a ! -d CVS ]; then echo "Must be in a branch subdirectory"; exit 1; fi |
| 350 |
|
| 351 |
@cvs status -v $(SPECFILE) 2>/dev/null | grep -q $(TAG); ret=$$? ;\ |
| 352 |
if [ $$ret -ne 0 ]; then echo "$(SPECFILE) not tagged with tag $(TAG)"; exit 1; fi |
| 353 |
|
| 354 |
@(pushd $(COMMON_DIR) >/dev/null ;\ |
| 355 |
rm -f tobuild ;\ |
| 356 |
cvs -Q update -C tobuild ;\ |
| 357 |
echo -e "$(USER)\t$(CVS_REPOSITORY)\t$(TAG)\t$(TARGET)" >> tobuild ;\ |
| 358 |
cvs commit -m "request build of $(CVS_REPOSITORY) $(TAG) for $(TARGET)" tobuild ;\ |
| 359 |
popd >/dev/null) |
| 360 |
|
| 361 |
build-check: $(SPECFILE) |
| 362 |
@if [ -z "$(TARGET)" -o ! -d CVS ]; then echo "Must be in a branch subdirectory"; exit 1; fi |
| 363 |
@cvs -f status -v $(SPECFILE) 2>/dev/null | grep -q $(TAG); ret=$$? ;\ |
| 364 |
if [ $$ret -ne 0 ]; then echo "$(SPECFILE) not tagged with tag $(TAG)"; exit 1; fi |
| 365 |
|
| 366 |
plague: build-check $(COMMON_DIR)/branches |
| 367 |
@if [ ! -x "$(PLAGUE_CLIENT)" ]; then echo "Must have plague-client installed - see http://fedoraproject.org/wiki/Extras/BuildSystemClientSetup"; exit 1; fi |
| 368 |
$(PLAGUE_CLIENT) build $(NAME) $(TAG) $(TARGET) |
| 369 |
|
| 370 |
koji: build-check $(COMMON_DIR)/branches |
| 371 |
@if [ ! -x "$(BUILD_CLIENT)" ]; then echo "Must have koji installed - see http://fedoraproject.org/wiki/BuildSystemClientSetup"; exit 1; fi |
| 372 |
$(BUILD_CLIENT) $(SECONDARY_CONFIG) build $(BUILD_FLAGS) $(TARGET) '$(CVS_URL)' |
| 373 |
|
| 374 |
ifneq (, $(filter devel, $(BRANCH))) |
| 375 |
build: koji |
| 376 |
else |
| 377 |
build: plague |
| 378 |
endif |
| 379 |
|
| 380 |
scratch-build: build-check |
| 381 |
@if [ ! -x "$(BUILD_CLIENT)" ]; then echo "Must have koji installed - see http://fedoraproject.org/wiki/BuildSystemClientSetup"; exit 1; fi |
| 382 |
$(BUILD_CLIENT) $(SECONDARY_CONFIG) build --scratch $(BUILD_FLAGS) $(TARGET) '$(CVS_URL)' |
| 383 |
|
| 384 |
|
| 385 |
scratch-build-%: build-check |
| 386 |
@if [ ! -x "$(BUILD_CLIENT)" ]; then echo "Must have koji installed - see http://fedoraproject.org/wiki/BuildSystemClientSetup"; exit 1; fi |
| 387 |
$(BUILD_CLIENT) $(SECONDARY_CONFIG) build --scratch --arch-override=$* $(BUILD_FLAGS) $(TARGET) '$(CVS_URL)' |
| 388 |
|
| 389 |
|
| 390 |
bodhi: build-check $(COMMON_DIR)/branches clog |
| 391 |
@if [ ! -x "$(BODHI_CLIENT)" ]; then echo "Must have bodhi-client installed"; exit 1; fi |
| 392 |
@echo -e "\ |
| 393 |
# [ $(NAME)-$(VERSION)-$(RELEASE) ]\n\ |
| 394 |
# type=[S|B|E] (S=security, B=bugfix, E=enhancement) (required)\n\ |
| 395 |
# request=[T|S] (T=testing, S=stable) (default: testing)\n\ |
| 396 |
# bug=123,456\n\ |
| 397 |
# all other text will be considered to be part of the update notes\n\ |
| 398 |
type=" > bodhi.template |
| 399 |
@grep -iZ '\[SME' clog | xargs -0n1 | sed -n -e 's,[^]]*\[SME[: ]*\([0-9]*\)\],\1 ,igp' | xargs | tr ' ' ',' > $(NAME).bugs |
| 400 |
@if [ `cat $(NAME).bugs` ]; then echo "bug=`cat $(NAME).bugs`" >> bodhi.template; fi |
| 401 |
@sed -e '/^#/d' < bodhi.template > bodhi.template.orig |
| 402 |
@if [ -z "$$EDITOR" ]; then vi bodhi.template; else $$EDITOR bodhi.template; fi |
| 403 |
@if [ -n "`sed -e '/^#/d' < bodhi.template | diff bodhi.template.orig -`" ]; then \ |
| 404 |
$(BODHI_CLIENT) -v --new --release $(subst -,,$(BRANCH)) \ |
| 405 |
--file bodhi.template $(NAME)-$(VERSION)-$(RELEASE) -u $(BODHI_USER); \ |
| 406 |
else \ |
| 407 |
echo "Bodhi update aborted!"; \ |
| 408 |
fi |
| 409 |
@rm -f bodhi.template{,.orig} $(NAME).bugs clog |
| 410 |
|
| 411 |
ifndef $(BODHI_USER) |
| 412 |
BODHI_USER=$(USER) |
| 413 |
endif |
| 414 |
|
| 415 |
ifneq (, $(filter sme7 sme8, $(BRANCH))) |
| 416 |
update: bodhi |
| 417 |
endif |
| 418 |
|
| 419 |
cvsurl: |
| 420 |
@echo '$(CVS_URL)' |
| 421 |
|
| 422 |
chain-build: build-check |
| 423 |
@if [ -z "$(CHAIN)" ]; then \ |
| 424 |
echo "Missing CHAIN variable, please specify the order of packages to" ; \ |
| 425 |
echo "chain build. For example: make chain-build CHAIN='foo bar'" ; \ |
| 426 |
exit 1 ; \ |
| 427 |
fi ; \ |
| 428 |
set -e ; \ |
| 429 |
subdir=`basename $$(pwd)` ; \ |
| 430 |
urls="" ; \ |
| 431 |
for component in $(CHAIN) ; do \ |
| 432 |
if [ "$$component" = "$(NAME)" ]; then \ |
| 433 |
echo "$(NAME) must not appear in CHAIN" ; \ |
| 434 |
exit 1 ; \ |
| 435 |
fi ; \ |
| 436 |
if [ "$$component" = ":" ]; then \ |
| 437 |
urls="$$urls :" ; \ |
| 438 |
continue ; \ |
| 439 |
elif [ -n "$$urls" -a -z "$(findstring :,$(CHAIN))" ]; then \ |
| 440 |
urls="$$urls :" ; \ |
| 441 |
fi ; \ |
| 442 |
rm -rf .tmp-$$$$ ; \ |
| 443 |
mkdir -p .tmp-$$$$ ; \ |
| 444 |
pushd .tmp-$$$$ > /dev/null ; \ |
| 445 |
cvs -f -Q -z 3 -d $(CVS_ROOT) co $$component ; \ |
| 446 |
urls="$$urls `make -s -C $$component/$$subdir cvsurl`" ; \ |
| 447 |
popd > /dev/null ; \ |
| 448 |
rm -rf .tmp-$$$$ ; \ |
| 449 |
done ; \ |
| 450 |
if [ -z "$(findstring :,$(CHAIN))" ]; then \ |
| 451 |
urls="$$urls :" ; \ |
| 452 |
fi ; \ |
| 453 |
urls="$$urls `make -s cvsurl`" ; \ |
| 454 |
$(BUILD_CLIENT) chain-build $(BUILD_FLAGS) $(TARGET) $$urls |
| 455 |
|
| 456 |
# "make new | less" to see what has changed since the last tag was assigned |
| 457 |
new: |
| 458 |
-@cvs diff -u -r$$(cvs log Makefile 2>/dev/null | awk '/^symbolic names:$$/ {getline; sub(/^[ \t]*/, "") ; sub (/:.*$$/, ""); print; exit 0}') |
| 459 |
|
| 460 |
# mop up, printing out exactly what was mopped. |
| 461 |
clean :: |
| 462 |
@echo "Running the %clean script of the rpmbuild..." |
| 463 |
-@$(RPM_WITH_DIRS) --clean --nodeps $(SPECFILE) |
| 464 |
@for F in $(FULLSOURCEFILES); do \ |
| 465 |
if test -e $$F ; then \ |
| 466 |
echo "Deleting $$F" ; /bin/rm -f $$F ; \ |
| 467 |
fi; \ |
| 468 |
done |
| 469 |
@if test -d $(TMPCVS); then \ |
| 470 |
echo "Deleting CVS dir $(TMPCVS)" ; \ |
| 471 |
/bin/rm -rf $(TMPCVS); \ |
| 472 |
fi |
| 473 |
@if test -e $(SRCRPMDIR)/$(NAME)-$(VERSION)-$(RELEASE).src.rpm ; then \ |
| 474 |
echo "Deleting $(SRCRPMDIR)/$(NAME)-$(VERSION)-$(RELEASE).src.rpm" ; \ |
| 475 |
/bin/rm -f $(SRCRPMDIR)/$(NAME)-$(VERSION)-$(RELEASE).src.rpm ; \ |
| 476 |
fi |
| 477 |
@rm -fv *~ clog |
| 478 |
@echo "Fully clean!" |
| 479 |
|
| 480 |
# To prevent CVS noise due to changing file timestamps, upgrade |
| 481 |
# to patchutils-0.2.23-3 or later, and add to ~/.cvspkgsrc: |
| 482 |
# FILTERDIFF := filterdiff --remove-timestamps |
| 483 |
ifndef FILTERDIFF |
| 484 |
FILTERDIFF := cat |
| 485 |
endif |
| 486 |
|
| 487 |
ifdef CVE |
| 488 |
PATCHFILE := $(NAME)-$(VERSION)-CVE-$(CVE).patch |
| 489 |
SUFFIX := cve$(shell echo $(CVE) | sed s/.*-//) |
| 490 |
else |
| 491 |
PATCHFILE := $(NAME)-$(VERSION)-$(SUFFIX).patch |
| 492 |
endif |
| 493 |
|
| 494 |
patch: |
| 495 |
@if test -z "$(SUFFIX)"; then echo "Must specify SUFFIX=whatever" ; exit 1; fi |
| 496 |
(cd $(RPM_BUILD_DIR)/.. && gendiff $(NAME)-$(VERSION) .$(SUFFIX) | $(FILTERDIFF)) > $(PATCHFILE) || true |
| 497 |
@if ! test -s $(PATCHFILE); then echo "Patch is empty!"; exit 1; fi |
| 498 |
@echo "Created $(PATCHFILE)" |
| 499 |
@grep "$(PATCHFILE)" CVS/Entries >&/dev/null || cvs add -ko $(PATCHFILE) || true |
| 500 |
|
| 501 |
# Recreates the patch file of specified suffix from the current working sources |
| 502 |
# but keeping any comments at the top of file intact, and backing up the old copy |
| 503 |
# with a '~' suffix. |
| 504 |
rediff: |
| 505 |
@if test -z "$(SUFFIX)"; then echo "Must specify SUFFIX=whatever" ; exit 1; fi |
| 506 |
@if ! test -f "$(PATCHFILE)"; then echo "$(PATCHFILE) not found"; exit 1; fi |
| 507 |
@mv -f $(PATCHFILE) $(PATCHFILE)\~ |
| 508 |
@sed '/^--- /,$$d' < $(PATCHFILE)\~ > $(PATCHFILE) |
| 509 |
@(cd $(RPM_BUILD_DIR)/.. && gendiff $(NAME)-$(VERSION) .$(SUFFIX) | $(FILTERDIFF)) >> $(PATCHFILE) || true |
| 510 |
|
| 511 |
clog: $(SPECFILE) |
| 512 |
@sed -n '/^%changelog/,/^$$/{/^%/d;/^$$/d;s/%%/%/g;p}' $(SPECFILE) | tee $@ |
| 513 |
|
| 514 |
commit: clog |
| 515 |
@cvs commit -F $? |
| 516 |
@rm -f clog |
| 517 |
|
| 518 |
help: |
| 519 |
@echo "Usage: make <target>" |
| 520 |
@echo "Available targets are:" |
| 521 |
@echo " help Show this text" |
| 522 |
@echo " sources Download source files [default]" |
| 523 |
@echo " upload FILES=<files> Add <files> to CVS" |
| 524 |
@echo " new-sources FILES=<files> Replace sources in CVS with <files>" |
| 525 |
@echo " <arch> Local test rpmbuild binary" |
| 526 |
@echo " local Local test rpmbuild binary" |
| 527 |
@echo " prep Local test rpmbuild prep" |
| 528 |
@echo " compile Local test rpmbuild compile" |
| 529 |
@echo " install Local test rpmbuild install" |
| 530 |
@echo " compile-short Local test rpmbuild short-circuit compile" |
| 531 |
@echo " install-short Local test rpmbuild short-circuit install" |
| 532 |
@echo " lint Run rpmlint against local build output" |
| 533 |
@echo " export Create clean export in \"cvs-$(TAG)\"" |
| 534 |
@echo " check Check test srpm preps on all archs" |
| 535 |
@echo " srpm Create a srpm" |
| 536 |
@echo " tag Tag sources as \"$(TAG)\"" |
| 537 |
@echo " build Request build of \"$(TAG)\" for $(TARGET)" |
| 538 |
@echo " chain-build Build current package in order with other packages" |
| 539 |
@echo " example: make chain-build CHAIN='libwidget libgizmo'" |
| 540 |
@echo " The current package is added to the end of the CHAIN list." |
| 541 |
@echo " Colons (:) can be used in the CHAIN parameter to define dependency groups." |
| 542 |
@echo " Packages in a single group will be built in parallel, and all packages" |
| 543 |
@echo " in a group must build successfully and populate the repository before" |
| 544 |
@echo " the next group will begin building." |
| 545 |
@echo " If no groups are defined, packages will be built sequentially." |
| 546 |
@echo " scratch-build Request scratch build of \"$(TAG)\" for $(TARGET)" |
| 547 |
@echo " scratch-build-<archs> Request scratch build of \"$(TAG)\" for $(TARGET) and archs <archs>" |
| 548 |
@echo " examples: make scratch-build-i386,ppc64" |
| 549 |
@echo " make scratch-build-x86_64" |
| 550 |
@echo " mockbuild Local test build using mock" |
| 551 |
@echo " verrel Echo \"$(NAME)-$(VERSION)-$(RELEASE)\"" |
| 552 |
@echo " new Diff against last tag" |
| 553 |
@echo " clog Make a clog file containing top changelog entry" |
| 554 |
@echo " commit Commit to CVS using the clog file as the log message" |
| 555 |
@echo " clean Remove srcs ($(SOURCEFILES)), export dir (cvs-$(TAG)) and srpm ($(NAME)-$(VERSION)-$(RELEASE).src.rpm)" |
| 556 |
@echo " patch SUFFIX=<suff> Create and add a gendiff patch file" |
| 557 |
@echo " rediff SUFFIX=<suff> Recreates a gendiff patch file, retaining comments" |
| 558 |
@echo " unused-patches Print list of patches not referenced by name in specfile" |
| 559 |
@echo " unused-fedora-patches Print Fedora patches not used by Patch and/or ApplyPatch directives" |
| 560 |
@echo " gimmespec Print the name of the specfile" |
| 561 |
@echo " update Submit $(NAME)-$(VERSION)-$(RELEASE) as an update for $(BRANCH)" |
| 562 |
|
| 563 |
gimmespec: |
| 564 |
@echo "$(SPECFILE)" |
| 565 |
|
| 566 |
unused-patches: |
| 567 |
@for f in *.patch; do if [ -e $$f ]; then grep -q $$f $(SPECFILE) || echo $$f; fi; done |
| 568 |
|
| 569 |
unused-fedora-patches: |
| 570 |
@for f in *.patch; do if [ -e $$f ]; then (egrep -q "^Patch[[:digit:]]+:[[:space:]]+$$f" $(SPECFILE) || echo "Unused: $$f") && egrep -q "^ApplyPatch[[:space:]]+$$f" $(SPECFILE) || echo "Unapplied: $$f"; fi; done |
| 571 |
|
| 572 |
##################### EXPERIMENTAL ########################## |
| 573 |
# this stuff is very experimental in nature and should not be |
| 574 |
# relied upon until these targets are moved above this line |
| 575 |
|
| 576 |
# This section contains some hacks that instrument |
| 577 |
# download-from-upstream support. You'll have to talk to gafton, he |
| 578 |
# knows how this shit works. |
| 579 |
|
| 580 |
# Add to the list of hardcoded upstream files the contents of the |
| 581 |
# ./upstream file |
| 582 |
UPSTREAM_FILES += $(shell if test -f ./upstream ; then cat ./upstream ; fi) |
| 583 |
# extensions for signature files we need to retrieve for verification |
| 584 |
# Warning: if you update the set of defaults, please make sure to |
| 585 |
# update/add to the checking rules further down |
| 586 |
UPSTREAM_CHECKS ?= sign asc sig md5 |
| 587 |
|
| 588 |
# check the signatures for the downloaded upstream stuff |
| 589 |
UPSTREAM_CHECK_FILES = $(foreach e, $(UPSTREAM_CHECKS), $(addsuffix .$(e), $(UPSTREAM_FILES))) |
| 590 |
|
| 591 |
# Download a file from a particular host. |
| 592 |
# First argument contains the url base, the second the filename, |
| 593 |
# third extra curl options |
| 594 |
define download-host-file |
| 595 |
if test ! -e "$(2)" ; then \ |
| 596 |
echo -n "URL: $(1)/$(2) ..." ; \ |
| 597 |
$(CURL) --silent --head $(1)/$(2) && \ |
| 598 |
{ \ |
| 599 |
echo "OK, downloading..." ; \ |
| 600 |
$(CURL) $(3) $(1)/$(2) ; \ |
| 601 |
} || \ |
| 602 |
echo "not found" ; \ |
| 603 |
fi |
| 604 |
endef |
| 605 |
|
| 606 |
# Download a file, trying each mirror in sequence. Also check for |
| 607 |
# signatures, if available |
| 608 |
# First argument contains the file name. We read the list of mirrors |
| 609 |
# from the ./mirrors file |
| 610 |
define download-file |
| 611 |
$(foreach h, $(shell cat mirrors), |
| 612 |
$(call download-host-file,$(h),$(1)) |
| 613 |
if test -e $(1) ; then \ |
| 614 |
$(foreach e,$(UPSTREAM_CHECKS),$(call download-host-file,$(h),$(1).$(e),--silent) ; ) \ |
| 615 |
fi |
| 616 |
) |
| 617 |
if test ! -e $(1) ; then \ |
| 618 |
echo "ERROR: Could not download file: $(1)" ; \ |
| 619 |
exit -1 ; \ |
| 620 |
else \ |
| 621 |
echo "File $(1) available for local use" ; \ |
| 622 |
fi |
| 623 |
endef |
| 624 |
|
| 625 |
# Download all the UPSTREAM files |
| 626 |
define download-files |
| 627 |
$(foreach f, $(UPSTREAM_FILES), |
| 628 |
$(call download-file,$(f)) |
| 629 |
echo |
| 630 |
) |
| 631 |
endef |
| 632 |
|
| 633 |
# Make sure the signature files we download are properly added |
| 634 |
define cvs-add-upstream-sigs |
| 635 |
for s in $(UPSTREAM_CHECK_FILES) ; do \ |
| 636 |
if test -f "$$s" ; then \ |
| 637 |
if ! grep "^/$$s/" CVS/Entries >/dev/null 2>/dev/null ; then \ |
| 638 |
cvs -Q add "$$s" ; \ |
| 639 |
fi ; \ |
| 640 |
fi ; \ |
| 641 |
done |
| 642 |
endef |
| 643 |
|
| 644 |
download : upstream mirrors |
| 645 |
@$(download-files) |
| 646 |
$(MAKE) download-checks |
| 647 |
|
| 648 |
download-checks :: import-upstream-gpg |
| 649 |
download-checks :: $(UPSTREAM_CHECK_FILES) |
| 650 |
|
| 651 |
# how to check for a gpg signature, given a separate signature file |
| 652 |
define check-upstream-gpg-sig |
| 653 |
echo -n "Checking GPG signature on $* from $@ : " |
| 654 |
if ! test -f $@ ; then \ |
| 655 |
echo "ERROR" ; echo "GPG signature file $@ not found" ; \ |
| 656 |
exit 1 ; \ |
| 657 |
fi |
| 658 |
if ! gpg --no-secmem-warning --no-permission-warning -q --verify $@ $* 2>/dev/null ; then \ |
| 659 |
echo "FAILED" ; \ |
| 660 |
exit 1 ; \ |
| 661 |
else \ |
| 662 |
echo "OK" ; \ |
| 663 |
fi |
| 664 |
endef |
| 665 |
|
| 666 |
# how to check for a md5sum, given a separate .md5 file |
| 667 |
define check-upstream-md5sum |
| 668 |
echo -n "Checking md5sum on $* from $@ : " |
| 669 |
if ! test -f $@ ; then \ |
| 670 |
echo "ERROR" ; echo "md5sum file $@ not found" ; \ |
| 671 |
exit 1 ; \ |
| 672 |
fi |
| 673 |
if ! md5sum $* | diff >/dev/null --brief "$@" - ; then \ |
| 674 |
echo "FAILED" ; \ |
| 675 |
exit 1 ; \ |
| 676 |
else \ |
| 677 |
echo "OK" ; \ |
| 678 |
fi |
| 679 |
endef |
| 680 |
|
| 681 |
# and now the rules, specific to each extension |
| 682 |
$(addsuffix .sign,$(UPSTREAM_FILES)): %.sign: % FORCE |
| 683 |
@$(check-upstream-gpg-sig) |
| 684 |
$(addsuffix .asc,$(UPSTREAM_FILES)): %.asc: % FORCE |
| 685 |
@$(check-upstream-gpg-sig) |
| 686 |
$(addsuffix .sig,$(UPSTREAM_FILES)): %.sig: % FORCE |
| 687 |
@$(check-upstream-gpg-sig) |
| 688 |
$(addsuffix .md5,$(UPSTREAM_FILES)): %.md5: % FORCE |
| 689 |
@$(check-upstream-md5sum) |
| 690 |
|
| 691 |
# We keep all the relevant GPG keys in the upstream-key.gpg so we can |
| 692 |
# check the signatures... |
| 693 |
import-upstream-gpg : upstream-key.gpg FORCE |
| 694 |
mkdir -p $(HOME)/.gnupg |
| 695 |
gpg --quiet --import --no-secmem-warning --no-permission-warning $< || : |
| 696 |
|
| 697 |
# A handy target to download the latest and greatest from upstream and |
| 698 |
# check it into the lookaside cache. |
| 699 |
# new-base assumes that all the sources are downloaded from upstream, so it uses "make new-source" |
| 700 |
# rebase uses the standard "make upload" |
| 701 |
new-base : clean download |
| 702 |
$(MAKE) new-source FILES="$(UPSTREAM_FILES)" |
| 703 |
@$(cvs-add-upstream-sigs) |
| 704 |
@echo "Don't forget to do a 'cvs commit' for your new sources file." |
| 705 |
|
| 706 |
rebase : clean download |
| 707 |
$(MAKE) upload FILES="$(UPSTREAM_FILES)" |
| 708 |
@$(cvs-add-upstream-sigs) |
| 709 |
@echo "Don't forget to do a 'cvs commit' for your new sources file." |
| 710 |
|
| 711 |
# there is more stuff to clean, now that we have upstream files |
| 712 |
clean :: |
| 713 |
@rm -fv $(UPSTREAM_FILES) |
Parent Directory
| 
Revision Log
| 
Revision Graph
