clamav/sme9/clamav.spec

# $Id$
# Authority: dag
# Upstream: <clamav-devel$lists,sf,net>

### FIXME: Sysv script does not have condrestart option (redo sysv script)
### FIXME: amavisd-new requires clamd to run as user vscan, solution needed
### REMINDER: Look and sync with Petr Kristof's work

%{?el3:%define _without_milter 1}
%{?rh9:%define _without_milter 1}
%{?rh7:%define _without_milter 1}
%{?el2:%define _without_milter 1}

# Work around https://bugzilla.clamav.net/show_bug.cgi?id=12162 by bundling
# newer zlib version from RHEL/CentOS 7 (#1600458)
%global zlibversion 1.2.7
%global zlibrelease 17%{?dist}


Summary: Anti-virus software
Name: clamav
Version: 0.100.2
Release: 5%{?dist}
# ClamAV is GPLv2, zlib is zlib, /contrib/dotzlib/ has Boost license
%if 0%{?zlibversion:1} && 0%{?zlibrelease:1}
License: GPLv2 and zlib and Boost
%else
License: GPLv2
%endif


Group: Applications/System
URL: http://www.clamav.net/

Source: http://downloads.sourceforge.net/project/clamav/clamav/%{version}/clamav-%{version}.tar.gz
Source1: clamav.init
Source2: clamav-milter.init
Source10: http://db.local.clamav.net/main.cvd
Source11: http://db.local.clamav.net/daily.cvd

%if 0%{?zlibversion:1} && 0%{?zlibrelease:1}
# Cheerfully borrowed from zlib.spec in RHEL/CentOS 7
Source90:   http://www.zlib.net/zlib-%{zlibversion}.tar.bz2
#Source90: zlib-1.2.7.tar.bz2
%endif

%if 0%{?zlibversion:1} && 0%{?zlibrelease:1}
# Cheerfully borrowed from zlib.spec in RHEL/CentOS 7, see
# also https://git.centos.org/tree/rpms!zlib.git/c7/SOURCES
Patch90:       zlib-1.2.5-minizip-fixuncrypt.patch
# resolves: #805113
Patch91:       zlib-1.2.7-optimized-s390.patch
# resolves: #844791
Patch92:       zlib-1.2.7-z-block-flush.patch
# resolves: #1127330
Patch93:       zlib-1.2.7-fix-serious-but-very-rare-decompression-bug-in-inftr.patch
# resolves: #1337441
Patch94:       zlib-1.2.7-Fix-bug-where-gzopen-gzclose-would-write-an-empty-fi.patch
%endif

BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root

BuildRequires: bzip2-devel
BuildRequires: curl-devel
BuildRequires: gmp-devel
BuildRequires: ncurses-devel
%{!?_without_milter:BuildRequires: sendmail-devel >= 8.12}
BuildRequires: check-devel
BuildRequires: openssl-devel
BuildRequires: libxml2-devel
BuildRequires: pcre-devel
BuildRequires: xz

### Do not require the latest release of clamav-db specifically (people may use freshclam onward)
#Requires: clamav-db = %{version}-%{release}
Requires: clamav-db

Provides: bundled(libmspack) = 0.5-0.1.alpha.modified_by_clamav
%if 0%{?zlibversion:1} && 0%{?zlibrelease:1}
Provides: bundled(zlib) = %{zlibversion}-%{zlibrelease}
%else
Requires: zlib-devel
%endif

### Fedora Extras introduced them differently :(
Obsoletes: libclamav <= %{version}-%{release}
Obsoletes: clamav-lib <= %{version}-%{release}
Provides: libclamav

%description
Clam AntiVirus is a GPL anti-virus toolkit for UNIX. The main purpose of
this software is the integration with mail servers (attachment scanning).
The package provides a flexible and scalable multi-threaded daemon, a
command line scanner, and a tool for automatic updating via Internet.

The programs are based on a shared library distributed with the Clam
AntiVirus package, which you can use with your own software. Most
importantly, the virus database is kept up to date

%package -n clamd
Summary: The Clam AntiVirus Daemon
Group: System Environment/Daemons
Requires: clamav = %{version}-%{release}
Requires(pre): /usr/sbin/groupadd
Requires(pre): /usr/sbin/useradd

### Fedora Extras introduced them differently :(
Obsoletes: clamav-server <= %{version}-%{release}

%description -n clamd
The Clam AntiVirus Daemon

%package milter
Summary: The Clam AntiVirus sendmail-milter Daemon
Group: Applications/System
Requires: clamd = %{version}-%{release}
Requires: smtpdaemon

%description milter
The Clam AntiVirus sendmail-milter Daemon

%package db
Summary: Virus database for %{name}
Group: Applications/Databases
### Remove circular dependency
#Requires: clamav = %{version}-%{release}
Requires(pre): /usr/sbin/groupadd
Requires(pre): /usr/sbin/useradd

### Fedora Extras introduced them differently :(
Provides: clamav-update = %{version}-%{release}
Obsoletes: clamav-update < %{version}-%{release}
Provides: clamav-data = %{version}-%{release}
Obsoletes: clamav-data < %{version}-%{release}
Obsoletes: clamav-data-empty <= %{version}-%{release}
# Ugly to put these in the db-package, but needed
# here to handle upgrades on EL5.
Provides: clamav-filesystem = %{version}-%{release}
Obsoletes: clamav-filesystem < %{version}-%{release}

%description db
The actual virus database for %{name}

%package devel
Summary: Header files, libraries and development documentation for %{name}
Group: Development/Libraries
Requires: clamav = %{version}-%{release}

### Fedora Extras introduced them differently :(
Obsoletes: libclamav-static-devel <= %{version}-%{release}
Obsoletes: libclamav-devel <= %{version}-%{release}
Provides: libclamav-static-devel, libclamav-devel

%description devel
This package contains the header files, static libraries and development
documentation for %{name}. If you like to develop programs using %{name},
you will need to install %{name}-devel.

%prep
%setup

%{__perl} -pi.orig -e 's|/lib\b|/%{_lib}|g;' libtool configure

%{__perl} -pi.orig -e '
        s|\@DBDIR\@|\$(localstatedir)/clamav|g;
        s|\@DBINST\@|\$(localstatedir)/clamav|g;
        s|\@CFGDIR\@|\$(sysconfdir)|g;
        s|\@CFGINST\@|\$(sysconfdir)|g;
        s|^\@INSTALL_CLAMAV_CONF_TRUE\@|\t|g;
        s|^\@INSTALL_FRESHCLAM_CONF_TRUE\@|\t|g;
    ' database/Makefile.in etc/Makefile.in

%{__perl} -pi -e '
        s|^(Example)|#$1|;
        s|^#(LogFile) .+$|$1 %{_localstatedir}/log/clamav/clamd.log|;
        s|^#(LogFileMaxSize) .*|$1 0|;
        s|^#(LogTime)|$1|;
        s|^#(LogSyslog)|$1|;
        s|^#(PidFile) .+$|$1 %{_localstatedir}/run/clamav/clamd.pid|;
        s|^#(TemporaryDirectory) .+$|$1 %{_localstatedir}/tmp|;
        s|^#(DatabaseDirectory) .+$|$1 %{_localstatedir}/clamav|;
        s|^#(LocalSocket) .+$|$1 %{_localstatedir}/run/clamav/clamd.sock|;
        s|^#(FixStaleSocket)|$1|;
        s|^#(TCPSocket) .+$|$1 3310|;
        s|^#(TCPAddr) .+$|$1 127.0.0.1|;
        s|^#(MaxConnectionQueueLength) .+$|$1 30|;
        s|^#(StreamSaveToDisk)|$1|;
        s|^#(MaxThreads) .+$|$1 50|;
        s|^#(ReadTimeout) .+$|$1 300|;
        s|^#(User) .+$|$1 clamav|;
        s|^#(AllowSupplementaryGroups).*$|$1 yes|;
        s|^#(ScanPE) .+$|$1 yes|;
        s|^#(ScanELF) .+$|$1 yes|;
        s|^#(DetectBrokenExecutables)|$1|;
        s|^#(ScanOLE2) .+$|$1 yes|;
        s|^#(ScanMail)|$1|;
        s|^#(ScanArchive) .+$|$1 yes|;
        s|^#(ArchiveMaxCompressionRatio) .+|$1 300|;
        s|^#(ArchiveBlockEncrypted)|$1|;
        s|^#(ArchiveBlockMax)|$1|;
    ' etc/clamd.conf.sample >etc/clamd.conf

%{__perl} -pi -e '
        s|^(Example)|#$1|;
        s|^#(AllowSupplementaryGroups) .+$|$1 yes|;
        s|^#(ClamdSocket) .+$|$1 unix:%{_localstatedir}/run/clamav/clamd.sock|;
        s|^#(LogFile) .+$|$1 %{_localstatedir}/log/clamav/clamav-milter.log|;
        s|^#(LogFileMaxSize) .*|$1 0|;
        s|^#(LogSyslog)|$1|;
        s|^#(LogTime)|$1|;
        s|^#(MilterSocket) /.*$|$1 unix:%{_localstatedir}/clamav/clmilter.socket|;
        s|^#(User) .+$|$1 clamav|;
    ' etc/clamav-milter.conf.sample >etc/clamav-milter.conf

%if 0%{?zlibversion:1} && 0%{?zlibrelease:1}
# Cheerfully borrowed from zlib.spec in RHEL/CentOS 7, see
# https://git.centos.org/blob/rpms!zlib.git/c7/SPECS!zlib.spec
tar xfj %{SOURCE90}
pushd zlib-%{zlibversion}
%patch90 -p1 -b .fixuncrypt
%ifarch s390 s390x
%patch91 -p1 -b .optimized-deflate
%endif
%patch92 -p1 -b .z-flush
%patch93 -p1
%patch94 -p1
popd
%endif

%{__perl} -p -e '
        s|^(Checks) .+$|$1 24|;
        s|^(Example)|#$1|;
        s|^#(DatabaseDirectory) .+$|$1 %{_localstatedir}/clamav|;
        s|^#(DatabaseOwner) .+$|$1 clamav|;
        s|^#(LogSyslog)|$1|;
        s|^#(NotifyClamd) .+$|$1 %{_sysconfdir}/clamd.conf|;
        s|^#(UpdateLogFile) .+$|$1 %{_localstatedir}/log/clamav/freshclam.log|;
    ' etc/freshclam.conf.sample >etc/freshclam.conf

%{__cat} <<EOF >clamd.logrotate
%{_localstatedir}/log/clamav/clamd.log {
    missingok
    notifempty
    create 644 clamav clamav
    postrotate
        killall -HUP clamd 2>/dev/null || :
    endscript
}
EOF

%{__cat} <<EOF >freshclam.logrotate
%{_localstatedir}/log/clamav/freshclam.log {
    missingok
    notifempty
    create 644 clamav clamav
}
EOF

%{__cat} <<'EOF' >freshclam.cron
#!/bin/sh

### A simple update script for the clamav virus database.
### This could as well be replaced by a SysV script.

%{_bindir}/freshclam --quiet
EOF

%{__cat} <<EOF >clamav-milter.sysconfig
### Simple config file for clamav-milter, you should
### read the documentation and tweak it as you wish.

CLAMAV_FLAGS="--config-file=%{_sysconfdir}/clamav-milter.conf"
EOF

%build
%if 0%{?zlibversion:1} && 0%{?zlibrelease:1}
# Cheerfully borrowed from zlib.spec in RHEL/CentOS 7, see
# https://git.centos.org/blob/rpms!zlib.git/c7/SPECS!zlib.spec
pushd zlib-%{zlibversion}
%ifarch ppc64 ppc64le
export CFLAGS="$RPM_OPT_FLAGS -fPIC -O3"
%else
export CFLAGS="$RPM_OPT_FLAGS -fPIC"
%endif

export LDFLAGS="$LDFLAGS -Wl,-z,relro"

./configure --libdir=%{_libdir} --includedir=%{_includedir} --prefix=%{_prefix} --static
make %{?_smp_mflags}
make install DESTDIR=%{_builddir}/%{name}-%{version}/zlib-%{zlibversion}-%{zlibrelease}
popd
%endif


%configure  \
    --program-prefix="%{?_program_prefix}" \
    --disable-clamav \
    --disable-llvm \
    --disable-static \
    --disable-zlib-vcheck \
    --enable-check \
    --enable-clamdtop \
    --enable-dns \
    --enable-id-check \
%{!?_without_milter:--enable-milter} \
    --with-dbdir="%{_localstatedir}/clamav" \
    --with-group="clamav" \
    --with-libcurl=%{_prefix} \
    --with-user="clamav" \
%if 0%{?zlibversion:1} && 0%{?zlibrelease:1}
    --with-zlib=%{_builddir}/%{name}-%{version}/zlib-%{zlibversion}-%{zlibrelease}%{_prefix} \
%endif

### Disable JIT until it is implemented securely (RHbz #573191)
#    --enable-llvm \
%{__make} %{?_smp_mflags}

%install
%{__rm} -rf %{buildroot}
%{__make} install DESTDIR="%{buildroot}"

%{__install} -Dp -m0755 %{SOURCE1} %{buildroot}%{_initrddir}/clamd
%{__install} -Dp -m0644 etc/freshclam.conf %{buildroot}%{_sysconfdir}/freshclam.conf
%{__install} -Dp -m0755 freshclam.cron %{buildroot}%{_sysconfdir}/cron.daily/freshclam
%{__install} -Dp -m0644 freshclam.logrotate %{buildroot}%{_sysconfdir}/logrotate.d/freshclam
%{__install} -Dp -m0644 etc/clamd.conf %{buildroot}%{_sysconfdir}/clamd.conf
%{__install} -Dp -m0644 clamd.logrotate %{buildroot}%{_sysconfdir}/logrotate.d/clamav

%if %{!?_without_milter:1}0
%{__install} -Dp -m0644 etc/clamav-milter.conf %{buildroot}%{_sysconfdir}/clamav-milter.conf
%{__install} -Dp -m0755 %{SOURCE2} %{buildroot}%{_initrddir}/clamav-milter
%{__install} -Dp -m0644 clamav-milter.sysconfig %{buildroot}%{_sysconfdir}/sysconfig/clamav-milter
%else
%{__rm} %{buildroot}%{_mandir}/man8/clamav-milter.8*
%endif

%{__install} -d -m0755 %{buildroot}%{_localstatedir}/log/clamav/
touch %{buildroot}%{_localstatedir}/log/clamav/freshclam.log
touch %{buildroot}%{_localstatedir}/log/clamav/clamd.log

%{__install} -d -m0755 %{buildroot}%{_localstatedir}/clamav/
%{__install} -d -m0755 %{buildroot}%{_localstatedir}/run/clamav/

#touch %{buildroot}%{_localstatedir}/clamav/daily.cld
#touch %{buildroot}%{_localstatedir}/clamav/main.cld

%{__install} -Dp -m0644 %SOURCE10 %{buildroot}%{_localstatedir}/clamav/main.cvd
%{__install} -Dp -m0644 %SOURCE11 %{buildroot}%{_localstatedir}/clamav/daily.cvd

%post
/sbin/ldconfig

ZONES="/usr/share/zoneinfo/zone.tab"
CONFIG="/etc/sysconfig/clock"

if [ -r "$CONFIG" -a -r "$ZONES" ]; then
    source "$CONFIG"
    export CODE="$(grep -E "\b$ZONE\b" "$ZONES" | head -1 | cut -f1 | tr '[A-Z]' '[a-z]')"
fi

if [ -z "$CODE" ]; then
    export CODE="local"
fi

%{__perl} -pi -e '
        s|^(DatabaseMirror) database\.clamav\.net$|$1 db.$ENV{"CODE"}.clamav.net\n$1 db.local.clamav.net|;
        s|^(DatabaseMirror) db\.\.clamav\.net$|$1 db.$ENV{"CODE"}.clamav.net\n$1 db.local.clamav.net|;
    ' %{_sysconfdir}/freshclam.conf{,.rpmnew} &>/dev/null || :

%postun -p /sbin/ldconfig

%pre -n clamd
/usr/sbin/groupadd -r clamav 2>/dev/null || :
/usr/sbin/useradd -r -d /var/clamav -s /sbin/nologin -c "Clam Anti Virus Checker" -g clamav clamav 2>/dev/null || :

%post -n clamd
/sbin/chkconfig --add clamd

%preun -n clamd
if [ $1 -eq 0 ]; then
    /sbin/service clamd stop &>/dev/null || :
    /sbin/chkconfig --del clamd
fi

%postun -n clamd
/sbin/service clamd condrestart &>/dev/null || :

%post milter
/sbin/chkconfig --add clamav-milter

%preun milter
if [ $1 -eq 0 ]; then
    /sbin/service clamav-milter stop &>/dev/null || :
    /sbin/chkconfig --del clamav-milter
fi

%postun milter
/sbin/service clamav-milter condrestart &>/dev/null || :

%pre db
/usr/sbin/groupadd -r clamav 2>/dev/null || :
/usr/sbin/useradd -r -d /var/clamav -s /sbin/nologin -c "Clam Anti Virus Checker" -g clamav clamav 2>/dev/null || :

%clean
%{__rm} -rf %{buildroot}

%files
%defattr(-, root, root, 0755)
%doc ChangeLog.md COPYING* INSTALL.md NEWS.md README.md
%doc etc/freshclam.conf.sample
%doc docs/*.pdf
### Remove test virus documents as they trigger clamav
#%doc test/
%doc %{_mandir}/man1/sigtool.1*
%doc %{_mandir}/man1/clambc.1*
%doc %{_mandir}/man1/clamscan.1*
%doc %{_mandir}/man1/freshclam.1*
%doc %{_mandir}/man5/freshclam.conf.5*
%config(noreplace) %{_sysconfdir}/freshclam.conf
%{_bindir}/clambc
%{_bindir}/clamscan
%{_bindir}/freshclam
%{_bindir}/sigtool
%{_libdir}/libclamav.so.*
%{_libdir}/libclamunrar.so.*
%{_libdir}/libclamunrar_iface.so.*
%{_libdir}/libclammspack.so.*
# moved from -devel to here so clamd can work with rars when clamav-devel is not installed.
%{_libdir}/libclamav.so
%{_libdir}/libclamunrar.so
%{_libdir}/libclamunrar_iface.so
%{_libdir}/libclammspack.so
%exclude %{_sysconfdir}/freshclam.conf.sample

%files -n clamd
%defattr(-, root, root, 0755)
%doc etc/clamd.conf.sample
%doc %{_mandir}/man1/clambc.1*
%doc %{_mandir}/man1/clamconf.1*
%doc %{_mandir}/man1/clamdscan.1*
%doc %{_mandir}/man1/clamdtop.1*
%doc %{_mandir}/man5/clamd.conf.5*
%doc %{_mandir}/man8/clamd.8*
%config(noreplace) %{_sysconfdir}/clamd.conf
%config(noreplace) %{_sysconfdir}/logrotate.d/clamav
%config %{_initrddir}/clamd
%{_sbindir}/clamd
%{_bindir}/clamconf
%{_bindir}/clamdscan
%{_bindir}/clamdtop

%defattr(0644, clamav, clamav, 0755)
%{_localstatedir}/run/clamav/
%dir %{_localstatedir}/clamav/
%dir %{_localstatedir}/log/clamav/
%ghost %{_localstatedir}/log/clamav/clamd.log

%exclude %{_localstatedir}/clamav/*
%exclude %{_sysconfdir}/clamd.conf.sample

%if %{!?_without_milter:1}0
%files milter
%defattr(-, root, root, 0755)
%doc etc/clamav-milter.conf.sample
%doc %{_mandir}/man5/clamav-milter.conf.5*
%doc %{_mandir}/man8/clamav-milter.8*
%config(noreplace) %{_sysconfdir}/clamav-milter.conf
%config(noreplace) %{_sysconfdir}/sysconfig/clamav-milter
%config %{_initrddir}/clamav-milter
%{_sbindir}/clamav-milter
%else
%exclude %{_mandir}/man5/clamav-milter.conf.5*
%endif
%exclude %{_sysconfdir}/clamav-milter.conf.sample

%files db
%defattr(-, root, root, 0755)
%config(noreplace) %{_sysconfdir}/cron.daily/freshclam
%config(noreplace) %{_sysconfdir}/logrotate.d/freshclam

%defattr(0644, clamav, clamav, 0755)
%config(noreplace) %verify(user group mode) %{_localstatedir}/clamav/
%dir %{_localstatedir}/log/clamav/
%ghost %{_localstatedir}/log/clamav/freshclam.log

%files devel
%defattr(-, root, root, 0755)
%{_bindir}/clamav-config
%{_includedir}/clamav.h
%{_libdir}/pkgconfig/libclamav.pc
%{_libdir}/pkgconfig/libclammspack.pc
%exclude %{_libdir}/libclamav.la
%exclude %{_libdir}/libclamunrar.la
%exclude %{_libdir}/libclamunrar_iface.la
%exclude %{_libdir}/libclammspack.la

%changelog
* Wed Mar 06 2019 Jean-Philipe Pialasse <tests@pialasse.com> 0.100.2-5.sme
- Update clamav-db as per epel last spec file [SME: ]
  to add clamav-update as provides

* Tue Nov 13 2018 John Crisp <jcrisp@safeandsoundit.co.uk> - 0.100.2-4
- Fix incorrect version number in the previoius changelog entry

* Mon Nov 12 2018 John Crisp <jcrisp@safeandsoundit.co.uk> - 0.100.3-1
- Bundle zlib 1.2.7-17.el7 to avoid malformed database errors (#1600458)
- [SME: 10645]

* Wed Oct 24 2018 Daniel Berteaud <daniel@firewall-services.com> - 0.100.2-1.sme
- Update to 0.100.2 [SME: 10579]

* Wed Mar 14 2018 Daniel Berteaud <daniel@firewall-services.com> - 0.99.4-1.sme
- Update to release 0.99.4 [SME: 10529]

* Sat Jan 27 2018 Daniel Berteaud <daniel@firewall-services.com> - 0.99.3-1.sme
- Update to release 0.99.3 [SME: 10499]

* Tue May 3 2016 Daniel Berteaud <daniel@firewall-services.com> - 0.99.2-1.sme
- Update to release 0.99.2 [SME: 9489]

* Thu Mar 3 2016 Daniel Berteaud <daniel@firewall-services.com> - 0.99.1-1.sme
- Update to release 0.99.1 [SME: 9267]

* Tue Jan 12 2016 Daniel Berteaud <daniel@firewall-services.com> - 0.99-2.sme
- Add pcre-devel to BuildRequires [SME: 9151]

* Wed Jan 6 2016 Daniel Berteaud <daniel@firewall-services.com> - 0.99-1.sme
- Update to release 0.99 [SME: 9151]

* Wed May 13 2015 Daniel Berteaud <daniel@firewall-services.com> - 0.98.7-1.sme
- Updated to release 0.98.7 [SME: 8922]

* Thu Jan 29 2015 Daniel Berteaud <daniel@firewall-services.com> - 0.98.6-1.sme
- Updated to release 0.98.6 [SME: 8822]

* Tue Dec 16 2014 Daniel Berteaud <daniel@firewall-services.com> - 0.98.5-1.sme
- Updated to release 0.98.5 [SME: 8729]

* Sat Jun 21 2014 Ian Wells <esmith@wellsi.com> - 0.98.4-2.sme
- Add BuildRequires for openssl-devel and libxml2-devel [SME: 8457]
- Remove Packager and Vendor from spec file.

* Thu Jun 17 2014 David Beveridge <dave@bevhost.com> - 0.98.4-1
- Updates to release 0.98.4.

* Thu May 8 2014 David Beveridge <dave@bevhost.com> - 0.98.3-1
- Updated to release 0.98.3.

* Sun Jan 26 2014 David Beveridge <dave@bevhost.com> - 0.98.1-1
- Updates to release 0.98.1.

* Tue Sep 24 2013 Dag Wieers <dag@wieers.com> - 0.98-1
- Updated to release 0.98.

* Tue May 07 2013 David Hrbáč <david@hrbac.cz> - 0.97.8-1
- Updated to release 0.97.8.

* Wed Mar 20 2013 Dag Wieers <dag@wieers.com> - 0.97.7-1
- Updated to release 0.97.7.

* Sun Sep 23 2012 Dag Wieers <dag@wieers.com> - 0.97.6-1
- Updated to release 0.97.6.

* Mon Jun 25 2012 David Hrbáč <david@hrbac.cz> - 0.97.5-2
- removed missing *.cld files (#183)

* Thu Jun 21 2012 David Hrbáč <david@hrbac.cz> - 0.97.5-1
- corrected missing DBs
- new upstream release

* Sat Jun 16 2012 Dag Wieers <dag@wieers.com> - 0.97.5-1
- Updated to release 0.97.5.

* Thu Mar 15 2012 Dag Wieers <dag@wieers.com> - 0.97.4-1
- Updated to release 0.97.4.

* Sat Dec 13 2011 Philip J Perry <phil@elrepo.org> - 0.97.3-2
- Fix Requires for clamav-milter to also allow use with Postfix.

* Mon Oct 17 2011 Dag Wieers <dag@wieers.com> - 0.97.3-1
- Updated to release 0.97.3.

* Mon Jul 25 2011 Dag Wieers <dag@wieers.com> - 0.97.2-1
- Updated to release 0.97.2.

* Thu Jun 09 2011 Dag Wieers <dag@wieers.com> - 0.97.1-1
- Updated to release 0.97.1.

* Tue Feb 08 2011 Dag Wieers <dag@wieers.com> - 0.97-1
- Updated to release 0.97.

* Tue Nov 30 2010 Dag Wieers <dag@wieers.com> - 0.96.5-1
- Updated to release 0.96.5.

* Mon Oct 25 2010 Dag Wieers <dag@wieers.com> - 0.96.4-1
- Updated to release 0.96.4.

* Tue Sep 21 2010 David Hrbáč <david@hrbac.cz> - 0.96.3-2
- Added buildrequires check-devel.

* Tue Sep 21 2010 Dag Wieers <dag@wieers.com> - 0.96.3-1
- Updated to release 0.96.3.

* Tue Aug 17 2010 Dag Wieers <dag@wieers.com> - 0.96.2-2
- Added patch that fixes segfault when using SELinux. (Beat Siegenthaler)

* Thu Aug 12 2010 Dag Wieers <dag@wieers.com> - 0.96.2-1
- Updated to release 0.96.2.

* Wed May 19 2010 Dag Wieers <dag@wieers.com> - 0.96.1-1
- Updated to release 0.96.1.

* Mon May 03 2010 Dag Wieers <dag@wieers.com> - 0.96-3
- Restored the LocalSocket configuration option to what it used to be. (Chris Butler)

* Wed Apr 07 2010 Dag Wieers <dag@wieers.com> - 0.96-2
- Removed test virus documents to prevent triggering clamav itself. (Patrick Mulvany)

* Wed Mar 31 2010 Dag Wieers <dag@wieers.com> - 0.96-1
- Updated to release 0.96.

* Thu Oct 29 2009 Dag Wieers <dag@wieers.com> - 0.95.3-1
- Updated to release 0.95.3.

* Fri Jun 12 2009 Christoph Maser <cmr@financial.com> - 0.95.2-1
- Updated to release 0.95.2.

* Mon May 04 2009 Dag Wieers <dag@wieers.com> - 0.95.1-4
- Fix the inconsistency between LocalSocket in clamd.conf and clamav-milter.conf. (Gerald Teschl)

* Sat May 02 2009 Dag Wieers <dag@wieers.com> - 0.95.1-3
- Fix the LocalSocket in clamd.conf. (Gerald Teschl)

* Wed Apr 15 2009 Fabian Arrotin <fabian.arrotin@arrfab.net> - 0.95.1-2
- Added a missing BuildRequires: ncurses-devel to build clamdtop.

* Fri Apr 10 2009 Dag Wieers <dag@wieers.com> - 0.95.1-2
- Corrected LogFile definition. (Vadim Druzhin)

* Wed Apr  8 2009 Dag Wieers <dag@wieers.com> - 0.95.1-1
- Updated to release 0.95.1.

* Tue Apr  7 2009 Dries Verachtert <dries@ulyssis.org> - 0.95-3
- Ugly fix for clamd which needs the .so files.

* Tue Mar 24 2009 Dag Wieers <dag@wieers.com> - 0.95-1
- Updated to release 0.95.

* Thu Nov 27 2008 Dag Wieers <dag@wieers.com> - 0.94.2-1
- Updated to release 0.94.2.

* Mon Nov 03 2008 Dag Wieers <dag@wieers.com> - 0.94.1-1
- Updated to release 0.94.1.

* Tue Sep 02 2008 Dag Wieers <dag@wieers.com> - 0.94-1
- Updated to release 0.94.

* Wed Jul 09 2008 Dag Wieers <dag@wieers.com> - 0.93.3-1
- Updated to release 0.93.3.

* Mon Jul 07 2008 Dag Wieers <dag@wieers.com> - 0.93.2-1
- Updated to release 0.93.2.

* Mon Jun 09 2008 Dag Wieers <dag@wieers.com> - 0.93.1-1
- Updated to release 0.93.1.

* Wed Apr 16 2008 Dag Wieers <dag@wieers.com> - 0.93-2
- Normal build causes linkage against installed library.

* Mon Apr 14 2008 Dag Wieers <dag@wieers.com> - 0.93-1
- Updated to release 0.93.

* Wed Feb 27 2008 Dag Wieers <dag@wieers.com> - queued
- Do not require the latest release of clamav-db. (Federico Simoncelli)

* Mon Feb 11 2008 Dag Wieers <dag@wieers.com> - 0.92.1-1
- Updated to release 0.92.1.

* Thu Dec 13 2007 Dag Wieers <dag@wieers.com> - 0.92-1
- Updated to release 0.92.

* Tue Aug 21 2007 Dag Wieers <dag@wieers.com> - 0.91.2-1
- Updated to release 0.91.2.

* Tue Jul 17 2007 Dag Wieers <dag@wieers.com> - 0.91.1-1
- Updated to release 0.91.1.

* Wed Jul 11 2007 Dag Wieers <dag@wieers.com> - 0.91-1
- Updated to release 0.91.

* Thu May 31 2007 Dag Wieers <dag@wieers.com> - 0.90.3-1
- Updated to release 0.90.3.

* Fri Apr 27 2007 Dag Wieers <dag@wieers.com> - 0.90.2-2
- Added clamav-milter support for EL2.1 now that it comes with a newer sendmail. (Tom G. Christensen)

* Sun Apr 15 2007 Dag Wieers <dag@wieers.com> - 0.90.2-1
- Updated to release 0.90.2.

* Fri Mar 09 2007 Dag Wieers <dag@wieers.com> - 0.90.1-4
- Removed circular dependency.

* Thu Mar 08 2007 Dag Wieers <dag@wieers.com> - 0.90.1-3
- Cleaned up default options to clamav-milter. (Adam T. Bowen)
- Removed -b/--bounce as it is no longer recognized. (Gerald Teschl)

* Mon Mar 05 2007 Dag Wieers <dag@wieers.com> - 0.90.1-2
- Removed the erroneous --dont-clean-log from the clamav-milter sysconfig. (Gerald Teschl)

* Fri Mar 02 2007 Dag Wieers <dag@wieers.com> - 0.90.1-1
- Updated to release 0.90.1.

* Tue Feb 20 2007 Dag Wieers <dag@wieers.com> - 0.90-3
- Do the right thing...

* Mon Feb 19 2007 Dag Wieers <dag@wieers.com> - 0.90-2
- The tarball was re-rolled before public release. Sigh.

* Tue Feb 13 2007 Dag Wieers <dag@wieers.com> - 0.90-1
- Updated to release 0.90.

* Tue Dec 12 2006 Dag Wieers <dag@wieers.com> - 0.88.7-1
- Updated to release 0.88.7.

* Sun Nov 05 2006 Dag Wieers <dag@wieers.com> - 0.88.6-1
- Updated to release 0.88.6.
- Added condrestart to sysv scripts. (Tsai Li Ming)

* Sat Oct 28 2006 Dag Wieers <dag@wieers.com> - 0.88.5-2
- Added missing clamav dependency to clamav-db.

* Sun Oct 15 2006 Dag Wieers <dag@wieers.com> - 0.88.5-1
- Updated to release 0.88.5.

* Mon Aug 07 2006 Dag Wieers <dag@wieers.com> - 0.88.4-1
- Updated to release 0.88.4.

* Mon Aug 07 2006 Dag Wieers <dag@wieers.com> - 0.88.3-2
- Incorporated UPX heap overflow fix.

* Sat Jul 01 2006 Dag Wieers <dag@wieers.com> - 0.88.3-1
- Updated to release 0.88.3.

* Sun Apr 30 2006 Dag Wieers <dag@wieers.com> - 0.88.2-1
- Updated to release 0.88.2.

* Tue Apr 04 2006 Dag Wieers <dag@wieers.com> - 0.88.1-1
- Updated to release 0.88.1.

* Mon Jan 09 2006 Dag Wieers <dag@wieers.com> - 0.88-1
- Updated to release 0.88.

* Sun Nov 13 2005 Dries Verachtert <dries@ulyssis.org> - 0.87.1-1
- Updated to release 0.87.1.

* Sat Sep 17 2005 Dag Wieers <dag@wieers.com> - 0.87-1
- Updated to release 0.87.

* Mon Jul 25 2005 Dag Wieers <dag@wieers.com> - 0.86.2-1
- Updated to release 0.86.2.

* Mon Jul 11 2005 Dag Wieers <dag@wieers.com> - 0.86.1-1
- Updated to release 0.86.1.

* Mon May 16 2005 Dag Wieers <dag@wieers.com> - 0.85.1-1
- Updated to release 0.85.1.

* Fri Apr 29 2005 Dag Wieers <dag@wieers.com> - 0.84-1
- Updated to release 0.84.

* Mon Feb 14 2005 Dag Wieers <dag@wieers.com> - 0.83-1
- Updated to release 0.83.

* Thu Feb 10 2005 Dag Wieers <dag@wieers.com> - 0.82-2
- Fix for false positive on RIFF files. (Roger Jochem)

* Mon Feb 07 2005 Dag Wieers <dag@wieers.com> - 0.82-1
- Updated to release 0.82.

* Thu Jan 27 2005 Dag Wieers <dag@wieers.com> - 0.81-1
- Improved logrotate scripts. (Filippo Grassilli)
- Updated to release 0.81.

* Wed Dec 01 2004 Dag Wieers <dag@wieers.com> - 0.80-2
- Added %dir /var/clamav/log. (Adam Bowns)
- Changed logrotate script to use clamd.log. (Stuart Schneider)
- Added curl dependency. (Petr Kristof)
- Synchronized some options from Petr. (Petr Kristof)
- Fixed another clamav.conf reference. (Michael Best)

* Mon Nov 01 2004 Dag Wieers <dag@wieers.com> - 0.80-1
- Updated package description. (Arvin Troels)
- Incorporated fixes from Jima. (Jima)
- Config clamav.conf renamed to clamd.conf.
- Removed obsolete patch.
- Added macros for building without milter.
- Updated to release 0.80.

* Fri Jul 30 2004 Dag Wieers <dag@wieers.com> - 0.75.1-1
- Added obsoletes for fedora.us.
- Updated to release 0.75.1.

* Mon Jul 26 2004 Dag Wieers <dag@wieers.com> - 0.75-2
- Fixed a problem where $CODE was empty.

* Fri Jul 23 2004 Dag Wieers <dag@wieers.com> - 0.75-1
- Updated to release 0.75.

* Wed Jun 30 2004 Dag Wieers <dag@wieers.com> - 0.74-1
- Updated to release 0.74.

* Tue Jun 15 2004 Dag Wieers <dag@wieers.com> - 0.73-1
- Updated to release 0.73.

* Thu Jun 03 2004 Dag Wieers <dag@wieers.com> - 0.72-1
- Updated to release 0.72.

* Thu May 20 2004 Dag Wieers <dag@wieers.com> - 0.71-1
- Updated to release 0.71.

* Sun May 02 2004 Dag Wieers <dag@wieers.com> - 0.70-2
- Fixed the installation check for conf files. (Richard Soderberg, Udo Ruecker)
- Changed the init-order of the sysv scripts. (Will McCutcheon)
- Changes to the default configuration files.

* Sat Mar 17 2004 Dag Wieers <dag@wieers.com> - 0.70-1
- Updated to release 0.70.

* Tue Mar 16 2004 Dag Wieers <dag@wieers.com> - 0.68-1
- Updated to release 0.68.

* Fri Mar 12 2004 Dag Wieers <dag@wieers.com> - 0.67.1-1
- Updated to release 0.67-1.
- Added clamdwatch and trashcan to clamd.

* Mon Mar 08 2004 Dag Wieers <dag@wieers.com> - 0.67-1
- Personalized SPEC file.

* Mon Aug 22 2003 Matthias Saou/Che
- Added "--without milter" build option. (Matthias Saou)
- Fixed freshclam cron (Matthias Saou)
- Built the new package. (Che)

* Tue Jun 24 2003 Che
- clamav-milter introduced.
- a few more smaller fixes.

* Sun Jun 22 2003 Che
- version upgrade

* Mon Jun 16 2003 Che
- rh9 build
- various fixes
- got rid of rpm-helper prereq

* Fri Mar 24 2003 Che
- some cleanups and fixes
- new patch added

* Fri Nov 22 2002 Che
- fixed a config patch issue

* Fri Nov 22 2002 Che
- version upgrade and some fixes

* Sat Nov 02 2002 Che
- version upgrade

* Wed Oct 24 2002 Che
- some important changes for lsb compliance

* Wed Oct 23 2002 Che
- initial rpm release