/[smeserver]/rpms/mkinitrd/sme7/mkinitrd.spec
ViewVC logotype

Annotation of /rpms/mkinitrd/sme7/mkinitrd.spec

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph


Revision 1.1 - (hide annotations) (download)
Tue Jun 12 16:36:24 2007 UTC (17 years, 4 months ago) by slords
Branch: MAIN
CVS Tags: mkinitrd-4_2_1_10-1_1_el4_sme
Import on branch sme7 of package mkinitrd-4.2.1.10-1.1.el4.sme.src.rpm

1 slords 1.1 Summary: Creates an initial ramdisk image for preloading modules.
2     Name: mkinitrd
3     Version: 4.2.1.10
4     Release: 1.1%{?dist}
5     License: GPL
6     Group: System Environment/Base
7     Source: mkinitrd-%{version}.tar.bz2
8     Patch1: mkinitrd-4.2.1.10-mdassemble.patch
9     ExclusiveOs: Linux
10     Prereq: dev
11     Requires: e2fsprogs, /bin/sh, fileutils, grep, mount, gzip, tar, /sbin/insmod.static, /sbin/losetup, mktemp >= 1.5-5, findutils, lvm2, kudzu, /usr/bin/which
12     Requires: filesystem >= 2.1.0, cpio
13     Requires: /sbin/mdassemble
14     Conflicts: udev < 0:032
15     BuildRequires: popt
16     BuildRequires: glibc-headers
17     %ifarch i386
18     BuildRequires: dietlibc
19     %endif
20     %ifarch ppc
21     Requires: ppc64-utils >= 0.3-1
22     %endif
23     BuildRoot: %{_tmppath}/%{name}-root
24    
25     %description
26     Mkinitrd creates filesystem images for use as initial ramdisk (initrd)
27     images. These ramdisk images are often used to preload the block
28     device modules (SCSI or RAID) needed to access the root filesystem.
29    
30     In other words, generic kernels can be built without drivers for any
31     SCSI adapters which load the SCSI driver as a module. Since the
32     kernel needs to read those modules, but in this case it isn't able to
33     address the SCSI adapter, an initial ramdisk is used. The initial
34     ramdisk is loaded by the operating system loader (normally LILO) and
35     is available to the kernel as soon as the ramdisk is loaded. The
36     ramdisk image loads the proper SCSI adapter and allows the kernel to
37     mount the root filesystem. The mkinitrd program creates such a
38     ramdisk using information found in the /etc/modules.conf file.
39    
40     %prep
41     %setup -q
42     %patch1 -p1
43    
44     %build
45     make
46     make test
47     if [ $? != 0 ]; then exit 1; fi
48    
49     %install
50     rm -rf $RPM_BUILD_ROOT
51     make BUILDROOT=$RPM_BUILD_ROOT mandir=%{_mandir} install
52    
53     %clean
54     rm -rf $RPM_BUILD_ROOT
55    
56     %files
57     %defattr(-,root,root)
58     %attr(755,root,root) /sbin/mkinitrd
59     %attr(644,root,root) %{_mandir}/man8/mkinitrd.8*
60     %attr(755,root,root) /sbin/nash
61     %attr(644,root,root) %{_mandir}/man8/nash.8*
62     %config %attr(755,root,root) /sbin/installkernel
63     %attr(755,root,root) /sbin/new-kernel-pkg
64     %attr(755,root,root) /sbin/grubby
65     %attr(644,root,root) %{_mandir}/man8/grubby.8*
66    
67     %changelog
68     * Wed May 9 2007 Shad L. Lords <slords@mail.com> 4.2.1.10-1.1.sme
69     - Clean up spec so package can be built by koji/plague
70     - Use generated config file instead of just scanning [SME: 2192]
71     - Use mdassemble rather than raidautorun in initrd, so that we control
72     UUID to device mapping. [SME: 961, 1895]
73    
74     * Wed Feb 7 2007 Peter Jones <pjones@redhat.com> - 4.2.1.10-1.1
75     - Fix 'requires' for usb changes.
76     Related: #202070
77    
78     * Fri Jan 31 2007 Peter Jones <pjones@redhat.com> - 4.2.1.10-1
79     - Allow use of usb devices as the root filesystem
80     Resolves: #202070
81    
82     * Thu Jan 30 2007 Peter Jones <pjones@redhat.com> - 4.2.1.9-1
83     - Fix handling of modprobe options when they span multiple lines
84     Resolves: #184544
85    
86     * Mon Apr 10 2006 Peter Jones <pjones@redhat.com> - 4.2.1.8-1
87     - Fix mangling of mount when using device mapper (#171872)
88     - Fix lvm striping (#174678, patch from Bastien Nocera)
89    
90     * Wed Aug 31 2005 Peter Jones <pjones@redhat.com> - 4.2.1.6-1
91     - Handle short reads correctly when dealing with files in /proc (#137816)
92    
93     * Mon Aug 29 2005 Peter Jones <pjones@redhat.com> - 4.2.1.5-1
94     - More fixes for duplicate arguments (#147222)
95    
96     * Mon Apr 4 2005 Peter Jones <pjones@redhat.com> - 4.2.1.5-1
97     - Don't consolidate duplicates in "--args" (#147222)
98    
99     * Fri Apr 1 2005 Peter Jones <pjones@redhat.com> - 4.2.1.4-1
100     - close /init just after reading the file, instead of after runStartup()
101     finishes, so it gets closed before we exec() /sbin/init . (#145601)
102    
103     * Thu Mar 17 2005 Peter Jones <pjones@redhat.com> - 4.2.1.3-1
104     - Don't do vgmknodes (more of #151172)
105    
106     * Tue Mar 15 2005 Peter Jones <pjones@redhat.com> - 4.2.1.2-1
107     - Fix clustered volume group locking in the initrd during vgscan/vgchange,
108     and only activate the volume group / lives on (#151172)
109    
110     * Mon Mar 14 2005 Peter Jones <pjones@redhat.com> - 4.2.1.1-1
111     - Make getArg return NULL on cmd=NULL, fixing #144472 . Based on a
112     patch from Kasper Dupont.
113     - Make nash expand environment variables on command lines (#144474)
114     - Make nash check pids returned from wait*() (#145660)
115    
116     * Wed Nov 3 2004 Jeremy Katz <katzj@redhat.com>
117     - handle machines with lots of disks in /proc/partitions (#137816)
118    
119     * Sun Oct 24 2004 Jeremy Katz <katzj@redhat.com>
120     - require cpio (#136814)
121    
122     * Sun Oct 17 2004 Jeremy Katz <katzj@redhat.com> - 4.1.18-1
123     - fix UPDATEDEFAULT with new-kernel-pkg (#135997)
124    
125     * Fri Oct 15 2004 Jeremy Katz <katzj@redhat.com> - 4.1.17-1
126     - run udevstart again instead of sleeping, this will ensure all
127     devices are created in all cases after modules have been
128     loaded (thanks to notting)
129    
130     * Fri Oct 15 2004 Jeremy Katz <katzj@redhat.com> - 4.1.16-1
131     - mkinitrd: Sleep briefly to let udev finish creating devices
132    
133     * Wed Oct 13 2004 Jeremy Katz <katzj@redhat.com> - 4.1.15-1
134     - new-kernel-pkg: set new kernels as default (#135161) when
135     a) /etc/sysconfig/kernel contains UPDATEDEFAULT=yes
136     b) --package foo is passed in and foo matches DEFAULTKERNEL
137     in /etc/sysconfig/kernel
138    
139     * Thu Sep 30 2004 Jeremy Katz <katzj@redhat.com> - 4.1.14-1
140     - support changing root on the kernel command line with lvm (#133236)
141    
142     * Wed Sep 22 2004 Jeremy Katz <katzj@redhat.com> - 4.1.12-1
143     - update to work with udev 032, conflict with old udev
144     - if udev is present, use it. trying to avoid the use of udev if it's
145     installed is the road to things not working
146    
147     * Fri Sep 10 2004 Jeremy Katz <katzj@redhat.com> - 4.1.11-1
148     - more fixing
149    
150     * Wed Sep 8 2004 Jeremy Katz <katzj@redhat.com> - 4.1.10-1
151     - mkinitrd: mount tmpfs with the right permissions
152    
153     * Tue Aug 31 2004 Jeremy Katz <katzj@redhat.com> - 4.1.9-1
154     - mkinitrd: use tmpfs instead of ramfs for udev stuff
155    
156     * Fri Aug 27 2004 Jeremy Katz <katzj@redhat.com> - 4.1.8-1
157     - nash: and the hack to fix ppc broke other arches, conditionalize it (#130928)
158    
159     * Wed Aug 25 2004 Jeremy Katz <katzj@redhat.com> - 4.1.6-1
160     - nash: fix another off by one (#130987)
161     - nash: hack to fix ppc booting (#130928)
162    
163     * Tue Aug 25 2004 Karsten Hopp <karsten@redhat.com> - 4.1.5-1
164     - fix zfcp handling
165    
166     * Tue Aug 24 2004 Jeremy Katz <katzj@redhat.com> - 4.1.4-1
167     - nash: create raid device if needed (think udev) before calling
168     the raidautorun ioctl (#130561)
169    
170     * Tue Aug 24 2004 Jeremy Katz <katzj@redhat.com> - 4.1.3-1
171     - nash: make echo behavior consistent with other shells
172     - more fixes from Steve Grubb (#129673)
173    
174     * Mon Aug 23 2004 Karsten Hopp <karsten@redhat.de> 4.1.2-1
175     - mkinitrd: add support for zfcp devices (mainframe)
176    
177     * Thu Aug 19 2004 Jeremy Katz <katzj@redhat.com> - 4.1.1-1
178     - don't remove lost+found (#130327)
179     - don't try to mount/umount /sys on 2.4 (#130298)
180    
181     * Tue Aug 17 2004 Jeremy Katz <katzj@redhat.com> - 4.1.0-1
182     - mkinitrd: if using udev for the initrd, set things up appropriately
183     (based on patches from Harald Hoyer and Thomas Woerner)
184     - nash: support for echo -n
185     - nash: better error message on exec failures
186     - nash: exec udev if we're called as a hotplug handler
187    
188     * Mon Aug 16 2004 Jeremy Katz <katzj@redhat.com> - 4.0.6-1
189     - various fixes from a code review by Steve Grubb which should fix
190     some of the lingering problems (#129673)
191     - nash: warning fix from Michal Jaegermann (#129673)
192     - grubby: removal with (hd0,0)
193    
194     * Thu Aug 12 2004 Jeremy Katz <katzj@redhat.com> - 4.0.5-1
195     - nash: oops, let's try that again
196    
197     * Wed Aug 11 2004 Jeremy Katz <katzj@redhat.com> - 4.0.4-1
198     - nash: fix mounting by label in some cases (tracked down by
199     Erik Jacobson, #129581, #129673, #129667, #129635)
200    
201     * Tue Aug 10 2004 Jeremy Katz <katzj@redhat.com> 4.0.3-1
202     - grubby: more (hd0,0) support (#125156)
203     - mkinitrd.8: update manpage (#129585)
204     - nash: fix some warnings
205    
206     * Wed Aug 4 2004 Jeremy Katz <katzj@redhat.com> 4.0.2-1
207     - nash: support bind mounting
208     - grubby: support the (hd0,0)/path syntax for kernels and initrds in
209     grub.conf (#114758, #125156, #120906)
210    
211     * Wed Aug 4 2004 Jeremy Katz <katzj@redhat.com> - 4.0.1-1
212     - improve handling of arguments to init with initramfs (#129057)
213    
214     * Mon Aug 2 2004 Jeremy Katz <katzj@redhat.com> - 4.0.0-1
215     - create an initramfs on 2.6 kernels instead of an initrd
216     - use new mount magic instead of pivot_root
217     on 2.6 kernels
218     - try to handle the case of modules going away on kernel upgrades a
219     little bit more nicely (#123994)
220     - avoid over-zealous creation of /dev/mapper/control (#127115)
221     - improve nash(8) manpage (#127413)
222    
223     * Fri Jun 18 2004 Jeremy Katz <katzj@redhat.com> - 3.5.24-1
224     - fix usb-storage detection with 2.6 (#126309)
225    
226     * Tue May 18 2004 Jeremy Katz <katzj@redhat.com> - 3.5.23-1
227     - add support for RAID6
228    
229     * Wed May 12 2004 Jeremy Katz <katzj@redhat.com>
230     - add support for multipath personality from Tom Callaway (#120379)
231    
232     * Thu May 6 2004 Jeremy Katz <katzj@redhat.com> - 3.5.22-1
233     - bump initrd size (#122325)
234    
235     * Wed Apr 14 2004 Jeremy Katz <katzj@redhat.com> - 3.5.21-1
236     - new-kernel-package: add patch from Ryan Tilder to allow setting new
237     kernel as default (#117605)
238     - mkinitrd: i2o_pci isn't in 2.6 (#120827)
239     - new-kernel-pkg: conditionalize kernel binary name for 2.6 vs 2.4
240     on ppc/ppc64 (as it's vmlinuz in 2.6 instead of the
241     vmlinux from 2.4) (#120868)
242    
243     * Tue Apr 13 2004 Jeremy Katz <katzj@redhat.com> - 3.5.20-1
244     - mkinitrd: minor regex fix for some kernel names (#120624)
245    
246     * Mon Feb 9 2004 Jeremy Katz <katzj@redhat.com> - 3.5.19-1
247     - nash/mkinitrd: quiet mode for nash and necessary mkinitrd changes
248     to work with it
249     - mkinitrd: add lxo's patch for copying lvm.conf (#112099)
250     - new-kernel-pkg: allow specifying the banner used in the boot loader config
251     on the command line (#114809)
252    
253     * Tue Jan 13 2004 Jeremy Katz <katzj@redhat.com>
254     - mkinitrd: add patch from Alex Kiernan for modules with multiple
255     deps in 2.6 (#113306)
256    
257     * Thu Jan 8 2004 Jeremy Katz <katzj@redhat.com> 3.5.18-1
258     - new-kernel-pkg: add a --kernel-arguments option (#113125)
259    
260     * Tue Jan 6 2004 Jeremy Katz <katzj@redhat.com>
261     - fix ybin path (#112939)
262    
263     * Sun Jan 4 2004 Jeremy Katz <katzj@redhat.com> 3.5.17-1
264     - mkinitrd: handle multiple spaces in modules.conf (from Lubomir Bulej)
265     - nash: rebuild against new dietlibc fixing problems with root=LABEL= (#112623)
266     - mkinitrd: determine kernel version and adjust modulefile appropriately
267     so that we look at /etc/modprobe.conf for 2.6 kernels
268     - mkinitrd: first pass at getting lvm working on 2.4 -> 2.6 upgrade
269    
270     * Wed Dec 24 2003 Jeremy Katz <katzj@redhat.com>
271     - mkinitrd: quiet strip by default
272    
273     * Mon Dec 22 2003 Jeremy Katz <katzj@redhat.com> 3.5.16.1-1
274     - make stripping less aggressive
275    
276     * Mon Dec 22 2003 Jeremy Katz <katzj@redhat.com> 3.5.16-1
277     - fixing handling of non-lvm case when /dev/mapper/control isn't present
278     - add patch from Al Viro to get root dev in numeric form by grokking sysfs
279    
280     * Tue Dec 9 2003 Jeremy Katz <katzj@redhat.com>
281     - strip modules if /usr/bin/strip exists (#111756)
282    
283     * Fri Dec 5 2003 Jeremy Katz <katzj@redhat.com> 3.5.15-2
284     - require lvm2 so that it gets installed early enough
285    
286     * Fri Dec 5 2003 Jeremy Katz <katzj@redhat.com> 3.5.15-1
287     - mkinitrd: add support for lvm2 (note: will not currently handle being
288     on a running 2.4 kernel and installing 2.6 with lvm rootfs)
289    
290     * Wed Dec 3 2003 Jeremy Katz <katzj@redhat.com>
291     - nash: add mkdmnod for creating the device-mapper control node
292    
293     * Thu Oct 2 2003 Jeremy Katz <katzj@redhat.com> 3.5.14-1
294     - fix dependency on /usr/bin/tail and /usr/bin/id
295    
296     * Tue Sep 30 2003 Florian La Roche <Florian.LaRoche@redhat.de>
297     - remove one more mktemp dir for "all loopback devices in use" case
298    
299     * Tue Sep 23 2003 Jeremy Katz <katzj@redhat.com> 3.5.13-1
300     - fix getting modules from /lib/modules/$(uname -r)/updates
301    
302     * Mon Sep 22 2003 Jeremy Katz <katzj@redhat.com> 3.5.12-1
303     - argument checking and usage for /sbin/installkernel (#103109)
304    
305     * Wed Sep 3 2003 Jeremy Katz <katzj@redhat.com> 3.5.11-1
306     - really only do grub configs on grub arches
307     - some usb mkinitrd fixes
308    
309     * Fri Aug 29 2003 Jeremy Katz <katzj@redhat.com> 3.5.10-1
310     - clean up bogus warning in installkernel
311     - only try to do grub configs on arches which support grub (#103261)
312    
313     * Thu Aug 7 2003 Matt Wilson <msw@redhat.com> 3.5.9-1
314     - add \n to error messages in grubby
315     - NUL terminate buffer returned from readlink properly
316     - symlinks are most likely relative, chdir to / before trying to
317     follow them
318     - yaboot needs boot prefix
319     - silo needs boot prefix too
320    
321     * Wed Jul 30 2003 Jeremy Katz <katzj@redhat.com>
322     - grubby: don't segfault on label=\n (reported by dburcaw)
323    
324     * Thu Jul 24 2003 Jeremy Katz <katzj@redhat.com>
325     - grubby: patch from zaitcev for uninitialized variable that can get
326     hit in the zipl case
327    
328     * Mon Jul 21 2003 Jeremy Katz <katzj@redhat.com> 3.5.8-1
329     - bump initrd size (#99525)
330    
331     * Wed Jul 9 2003 Jeremy Katz <katzj@redhat.com> 3.5.7-1
332     - pick modules from /lib/modules/$(uname -r)/updates first
333     - be less confused by more than one module of a name
334    
335     * Wed Jun 25 2003 Jeremy Katz <katzj@redhat.com> 3.5.6-1
336     - unbreak reading module options from modules.conf again (#97982)
337    
338     * Fri Jun 20 2003 Bill Nottingham <notting@redhat.com> 3.5.5-1
339     - fix modules.dep usage for 2.5/2.6
340    
341     * Fri Jun 20 2003 Jeremy Katz <katzj@redhat.com> 3.5.4-1
342     - handle more bizarre modules.conf constructs (notting)
343    
344     * Thu Jun 12 2003 Jeremy Katz <katzj@redhat.com> 3.5.3-1
345     - mkinitrd: fix copying of pvs (#97314, #97289)
346     - mkinitrd: use pvscan instead of lvmdiskscan to find PVs to work
347     better on other arches
348     - mkinitrd: better check for dasd existence
349     - mkinitrd: make certain lvm-mod is included if root on lvm
350    
351     * Wed Jun 11 2003 Jeremy Katz <katzj@redhat.com> 3.5.2-1
352     - mkinitrd: revert use of modprobe -c. it breaks in the installer when we
353     don't have a modules.dep for the BOOT kernel
354     - nash: return pivot_root call correctly (#97753)
355    
356     * Wed Jun 11 2003 Jeremy Katz <katzj@redhat.com> 3.5.1-1
357     - nash: fix syscall bits with gcc 3.3 on s390
358     - new-kernel-pkg: do depmod before mkinitrd (#97218)
359    
360     * Tue Jun 10 2003 Jeremy Katz <katzj@redhat.com> 3.5.0-1
361     - mkinitrd: add patch from gc@mandrakesoft.com to determine module
362     deps from modules.dep (#87873)
363     - tweak patch to not break weird cases where module deps aren't all
364     you need :/
365     - grubby: don't remove the last kernel (#60041)
366     - mkinitrd: use modprobe -c to find module options (#89794)
367    
368     * Tue May 20 2003 Matt Wilson <msw@redhat.com> 3.4.52-1
369     - use addSystemMap to build the image for iSeries (#91187)
370    
371     * Fri May 16 2003 Jeremy Katz <katzj@redhat.com> 3.4.51-1
372     - grubby: error out gracefully if we run out of space (#85424)
373     - mkinitrd: copy parent dirs for pvs (#88962)
374     - mkinitrd: exit with an exit status if tar fails (#90123)
375     - new-kernel-pkg: only use the first entry for / (#90155)
376     - grubby: fix a buffer overflow (#90444)
377    
378     * Wed Apr 30 2003 Jeremy Katz <katzj@redhat.com> 3.4.50-1
379     - fix typo in new-kernel-pkg for iSeries
380    
381     * Wed Apr 30 2003 Elliot Lee <sopwith@redhat.com>
382     - BuildRequires: popt
383     - Change grubby Makefile to static-link popt a bit more cleanly
384    
385     * Thu Apr 24 2003 Jeremy Katz <katzj@redhat.com> 3.4.49.1-1
386     - use Arjan's suggestion of vmlinitrd for the kernel + initrd combo file
387    
388     * Thu Apr 24 2003 Jeremy Katz <katzj@redhat.com> 3.4.49-2
389     - fix description referencing /etc/conf.modules (#89558)
390    
391     * Thu Apr 24 2003 Jeremy Katz <katzj@redhat.com> 3.4.49-2
392     - require ppc64-utils on ppc
393    
394     * Fri Apr 18 2003 Jeremy Katz <katzj@redhat.com> 3.4.49-1
395     - new-kernel-pkg: on iSeries, we don't have a boot loader, just make the
396     kernel + initrd combo file (/boot/vmlinux-version.img)
397    
398     * Mon Apr 07 2003 Karsten Hopp <karsten@redhat.com> 3.4.48-1
399     - Fix segfault on mainframe
400    
401     * Wed Mar 26 2003 Jeremy Katz <katzj@redhat.com> 3.4.47-1
402     - mkinitrd: fix using options for loading modules
403     - mkinitrd: don't use kernel parameters for dasd at mkinitrd time,
404     use what's in modules.conf
405    
406     * Mon Mar 24 2003 Jeremy Katz <katzj@redhat.com> 3.4.46-1
407     - new-kernel-pkg: add necessary bits for s390, some logic cleanups
408     - grubby: fix root detection for s390{,x}
409    
410     * Sun Mar 23 2003 Jeremy Katz <katzj@redhat.com> 3.4.45-1
411     - grubby: add silo support (sparc)
412     - grubby: add zipl support (s390{,x})
413     - add grubby test cases for zipl support
414    
415     * Wed Mar 19 2003 Jeremy Katz <katzj@redhat.com> 3.4.44.1-1
416     - fix dasd option reading
417    
418     * Fri Mar 14 2003 Phil Knirsch <pknirsch@redhat.com> 3.4.44
419     - Added automatic dasd= parameters for kernel parameter on s390(x).
420    
421     * Tue Mar 4 2003 Jeremy Katz <katzj@redhat.com> 3.4.43-1
422     - apply ppc patches for new-kernel-pkg and installkernel from Dan
423     Burcaw <dburcaw@terrasoftsolutions.com>
424     - man page tweak (#85471)
425    
426     * Tue Feb 18 2003 Jeremy Katz <katzj@redhat.com> 3.4.42-1
427     - grubby: fix segfault from uninitialized variable (#84128)
428    
429     * Tue Feb 11 2003 Jeremy Katz <katzj@redhat.com> 3.4.41-1
430     - nash: add readlink
431     - use readlink for rootdev to handle symlinks to root devs (#83391)
432    
433     * Tue Feb 4 2003 Jeremy Katz <katzj@redhat.com> 3.4.40-1
434     - fix i2o module ordering (#83447)
435     - ifarch'd build requires of dietlibc now that the build system has a way to
436     handle these
437    
438     * Sat Feb 01 2003 Florian La Roche <Florian.LaRoche@redhat.de>
439     - change one test from a number to a string test that could otherwise
440     fail in not properly setup chroot environments
441    
442     * Fri Jan 31 2003 <ewt@redhat.com>
443     - added support for yaboot
444     - test script runs tests for all platforms
445     - separated elilo configuration from lilo mode, allowing elilo specific
446     tests to be run on any platform
447    
448     * Sun Jan 26 2003 <ewt@redhat.com>
449     - grubby now shortens lilo titles to ensure they are less then 16 characters
450     long (76236)
451     - mkinitrd would only turn on /dev/md0 if raid was needed; now it enables
452     all raid devices listed in /proc/mdstat (82209)
453     - use product name from /etc/redhat-release to generate label in grub.conf
454     (82352)
455    
456     * Mon Jan 20 2003 Bill Nottingham <notting@redhat.com> 3.4.36-1
457     - don't error out running awk on /proc/mdstat if /proc/mdstat isn't
458     there
459    
460     * Tue Jan 14 2003 <ewt@redhat.com>
461     - all mkdev() actions will create directories as needed (some code in
462     mkdevices is now obsolete; I'll remove it later) (#73317)
463     - added mkdev command to test the above
464     - support diratime/nodiratime mount options (#78738)
465     - grubby will follow symlinks when writing new config file (#78713)
466     - don't depend on raidtab, use /proc/mdstat instead (#80424) this covers
467     both mkinitrd and grubby
468    
469     * Sun Jan 5 2003 Jeremy Katz <katzj@redhat.com> 3.4.34-1
470     - grubby: fix segfault finding default if default doesn't have a root= (#66000)
471     - don't include usb modules by default. pass --with-usb to get usb modules
472     - make sure kudzu exists before trying to exec it
473     - handle multiple scsi hosts being present (#77422)
474     - add /usr/sbin to default path (#79581)
475     - fix using --builtin= (#80448)
476     - grubby: preserve the mode on config files (#80776)
477    
478     * Mon Dec 16 2002 Jeremy Katz <katzj@redhat.com>
479     - errno fixes
480    
481     * Tue Dec 03 2002 Florian La Roche <Florian.LaRoche@redhat.de>
482     - /sbin/new-kernel-pkg: fix a test to have correct ""
483    
484     * Fri Nov 22 2002 Jeremy Katz <katzj@redhat.com>
485     - mkinitrd: more gzipped module fixes
486    
487     * Thu Nov 21 2002 Jeremy Katz <katzj@redhat.com>
488     - mkinitrd: add support for finding gzipped modules
489     - mkinitrd: don't be noisy if we don't have lvm-mod loaded
490    
491     * Wed Nov 6 2002 Jeremy Katz <katzj@redhat.com>
492     - grubby: don't bail when looking for root in appends of lilo-style configs
493     - include grubby on x86_64
494    
495     * Thu Sep 26 2002 Nalin Dahyabhai <nalin@redhat.com>
496     - fix some syntax errors
497     - use grep's -q flag to save a redirect in places where we're not redirecting
498     stderr
499    
500     * Thu Sep 5 2002 Jeremy Katz <katzj@redhat.com>
501     - grubby could segfault by going into its lilo checking if it couldn't find
502     a default to copy (default had no root= and --bad-image-okay wasn't
503     being used)
504    
505     * Mon Sep 2 2002 Jeremy Katz <katzj@redhat.com>
506     - nash: create directories if needed in mkdevices command (#73090)
507     - grubby: handle lilo case of non-linux default (#72202)
508    
509     * Sat Aug 31 2002 Jeremy Katz <katzj@redhat.com>
510     - grubby: fix for case like 'append = " hdc=ide-scsi "' (#68802)
511    
512     * Fri Aug 30 2002 Bill Nottingham <notting@redhat.com>
513     - fix firewire stuff (#72916)
514    
515     * Fri Aug 23 2002 Bill Nottingham <notting@redhat.com>
516     - fix mpt fusion stuff
517    
518     * Tue Aug 13 2002 Jeremy Katz <katzj@redhat.com>
519     - /boot/efi/redhat -> /boot/efi/EFI/redhat on ia64
520    
521     * Sun Aug 11 2002 Jeremy Katz <katzj@redhat.com>
522     - fix grubby to work correctly on ia64
523    
524     * Thu Aug 08 2002 Michael Fulbright <msf@redhat.com>
525     - added sleep command to nash and fixed creating initrd with / or /boot on usb
526    
527     * Tue Jul 30 2002 Jeremy Katz <katzj@redhat.com>
528     - grubby: adding kernels to lilo.conf when not using root=LABEL will work
529     now too
530    
531     * Fri Jul 26 2002 Erik Troan <ewt@redhat.com>
532     - didn't close /proc/partitions in mkdevices
533    
534     * Thu Jul 25 2002 Jeremy Katz <katzj@redhat.com>
535     - grubby: fix adding kernels to lilo when using root=LABEL
536    
537     * Wed Jul 24 2002 Erik Troan <ewt@redhat.com>
538     - added and used mkdevices command (68959)
539    
540     * Wed Jul 17 2002 Erik Troan <ewt@redhat.com>
541     - do proper probing to check root=LABEL
542     - --bootloader-probe didn't support /etc/sysconfig/grub
543    
544     * Fri Jul 12 2002 Erik Troan <ewt@redhat.com>
545     - don't sanity check root=LABEL right now; probing might make sense?
546    
547     * Wed Jul 10 2002 Erik Troan <ewt@redhat.com>
548     - --ifneeded is obsolete; we always need initrds
549     - grubby lets you specify multiple indexes for --info
550     - grubby lets you select kernels by title
551     - added showlabels to nash
552     - new-kernel-pkg sets the root device from /etc/fstab rather then inheriting it
553     - new-kernel-pkg removes all entries w/ a duplicate label (67459)
554    
555     * Mon Jul 08 2002 Erik Troan <ewt@redhat.com>
556     - usb root device code could fail, causing no initrd to be made
557    
558     * Thu Jun 27 2002 Erik Troan <ewt@redhat.com>
559     - grubby didn't add new kernels properly
560    
561     * Thu Jun 27 2002 Erik Troan <ewt@redhat.com>
562     - support root on usb devices
563    
564     * Wed Jun 26 2002 Erik Troan <ewt@redhat.com>
565     - other= in lilo.conf wasn't being parsed out properly
566    
567     * Mon Jun 24 2002 Erik Troan <ewt@redhat.com>
568     - changed --add-kernel implementation so that --args gets handled properly
569    
570     * Sun Jun 23 2002 Erik Troan <ewt@redhat.com>
571     - added loadinitrd (used by mkbootdisk) on ia32 and sparc
572     - modules "off" and "null" should be ignored (67086)
573     - mkrootdev looks for root=LABEL=/ in /proc/cmdline, so root by label
574     works again (fully determined by root= kernel parameter)
575     - added --update-kernel and --remove-args arguments to grubby
576     - kernel specification of ALL supported by grubby
577     - DEFAULT accepted much more consistently
578     - grubby --info displays info on all kernels specified, not just the first
579     - ext3 need mbcache now (67354)
580     - grubby allows config file entry numbers to be used as kernel paths
581     - support /etc/sysconfig/grub.conf
582     - display lba info from lilo.conf file in --info
583    
584     * Thu Jun 13 2002 Jeremy Katz <katzj@redhat.com>
585     - don't run lilo twice on kernel removal in new-kernel-pkg
586     - don't run grubby to add/remove kernels from new-kernel-pkg if
587     bootloader config doesn't
588    
589     * Tue Jun 11 2002 Erik Troan <ewt@redhat.com>
590     - added --bootloader-probe to grubby
591     - wrote a man page for grubby
592     - include grubby on ia64
593     - updated new-kernel-pkg to work with lilo/elilo
594     - added --info=DEFAULT option
595    
596     * Mon Jun 10 2002 Jeremy Katz <katzj@redhat.com>
597     - start raid before lvm so that you can have root on lvm on raid (#66175)
598    
599     * Tue Jun 04 2002 Erik Troan <ewt@redhat.com>
600     - failed to initialize a variable in grubby
601    
602     * Fri May 31 2002 Erik Troan <ewt@redhat.com>
603     - added --grub option so grub tests could run on ia64
604     - added some basic tests of lilo default directive handling
605    
606     * Wed May 29 2002 Jeremy Katz <katzj@redhat.com>
607     - require lvm
608    
609     * Tue May 28 2002 Bill Nottingham <notting@redhat.com>
610     - fix umounting of /initrd when pivoting
611    
612     * Tue May 28 2002 Erik Troan <ewt@redhat.com>
613     - marked /sbin/installkernel as %config (53006)
614     - run make test during build
615    
616     * Wed May 22 2002 Erik Troan <ewt@redhat.com>
617     - added --nopivot (53679)
618     - honor INSTALL_PATH in installkernel (32833)
619     - installkernel versions old kernels as well (52756)
620     - lilo support added to grubby
621    
622     * Tue May 21 2002 Erik Troan <ewt@redhat.com>
623     - cleaned up usage message
624     - added --omit-lvm-modules to man page
625     - added --builtin option (65250)
626     - skip comments in fstab (65249)
627     - added findlodev to nash, use that to pick block device (63421)
628     - support -o option in nash's mount (59185)
629     - look for xfs_dmapi (60066)
630     - added > support for executed commands (61180)
631     - grubby copies permissions from old config file (59227)
632     - use options from fstab for root filesystem (56071)
633     - try and be better about returning nonzero on error (60203)
634     - make modprobe symlink properly to avoid kernel message (62145)
635     - support linear raid (12775)
636     - support fallback option in grub config (54794)
637     - comments in template entries not handled quite right (65198)
638    
639     * Sat Apr 20 2002 Erik Troan <ewt@redhat.com>
640     - grubby does a better job of not adding superfluous default= lines
641    
642     * Wed Apr 17 2002 Erik Troan <ewt@redhat.com>
643     - preload works again
644    
645     * Wed Apr 10 2002 Jeremy Katz <katzj@redhat.com>
646     - revert to not mounting by label
647    
648     * Fri Apr 5 2002 Jeremy Katz <katzj@redhat.com>
649     - include pbrown's changes to load parport_pc when needing ppa.o (#35360)
650    
651     * Thu Apr 4 2002 Jeremy Katz <katzj@redhat.com>
652     - fix redirection bug (#62623)
653     - create proper link of /sbin->/bin in initrd (#62199)
654    
655     * Thu Mar 28 2002 Jeremy Katz <katzj@redhat.com>
656     - prereq dev package so that we always have the dev package before we get run
657    
658     * Fri Mar 22 2002 Jeremy Katz <katzj@redhat.com>
659     - duh, that won't work. fix it
660     - don't require lvm tools right now
661    
662     * Thu Mar 21 2002 Jeremy Katz <katzj@redhat.com>
663     - fix nash to create directories for devices like cciss and ida
664    
665     * Tue Feb 5 2002 Bill Nottingham <notting@redhat.com>
666     - run mkinitrd with -f in new-kernel-pkg
667     - don't run lilo in /sbin/installkernel
668    
669     * Fri Feb 1 2002 Jeremy Katz <katzj@redhat.com>
670     - require lvm
671    
672     * Thu Jan 31 2002 Jeremy Katz <katzj@redhat.com>
673     - clean up warnings for when /proc isn't mounted
674    
675     * Tue Jan 29 2002 Jeremy Katz <katzj@redhat.com>
676     - fix probing for LVM usage to require a volume group to exist before adding
677     the module
678     - --omit-lvm-modules will omit LVM modules
679     - add support for root device being LVM
680    
681     * Wed Jan 16 2002 Erik Troan <ewt@redhat.com>
682     - look for a non /tmpfs directory
683     - added support for xfs
684     - use with raid md.o if it exists
685     - fixed bug in echo
686     - use find form nash rather then /usr (mkinitrd shouldn't need /usr
687     mounted)
688    
689     * Fri Jan 11 2002 Erik Troan <ewt@redhat.com>
690     - added support for mounting root filesystem by label
691     - switched to dietlibc from minilibc
692     - fix so --preload= works [33675,57560,44377]
693     - added info on --image-version and --nocompress to man page [57560]
694     - set fileystem check interval to 0 in case the system clock
695     is borked [51454]
696     - give a proper error when run by a user other then root [27218,53159]
697     - grubby statically linked against popt [55305]
698     - cleaned up verbose output a bit [21791]
699    
700     * Tue Dec 18 2001 Trond Eivind Glomsrød <teg@redhat.com>
701     - Add LVM module when LVM is used
702    
703     * Wed Sep 5 2001 Jeremy Katz <katzj@redhat.com>
704     - grubby shouldn't blow away default=saved lines (#52981)
705    
706     * Fri Aug 31 2001 Jeremy Katz <katzj@redhat.com>
707     - fix new-kernel-pkg --mkinitrd for ia64
708    
709     * Thu Aug 30 2001 Erik Troan <ewt@redhat.com>
710     - fixed bug handling invalid default (MF #52889)
711     - in some cases we would set the default to point at a removed image
712    
713     * Wed Aug 29 2001 Erik Troan <ewt@redhat.com>
714     - minor grubby fixes
715    
716     * Tue Aug 28 2001 Jeremy Katz <katzj@redhat.com>
717     - let new-kernel-pkg be able to do more (initrds, modules.*)
718     - include grubby only on x86
719    
720     * Mon Aug 27 2001 Jeremy Katz <katzj@redhat.com>
721     - more grubby fixups for having a /boot
722     - added new-kernel-pkg
723    
724     * Sun Aug 26 2001 Erik Troan <ewt@redhat.com>
725     - added grubby
726     - added installkernel
727    
728     * Fri Aug 3 2001 Matt Wilson <msw@redhat.com>
729     - make consoles with the correct minor numbers
730     - applied patch from hjl to fix fstab parsing (#50819)
731    
732     * Fri Jul 20 2001 Jeremy Katz <katzj@redhat.com>
733     - skip errors finding jbd as a module if we're skipping them trying to find
734     ext3 so that you can build a kernel with ext3 built-in and still use an
735     initrd
736    
737     * Wed Jul 11 2001 Bill Nottingham <notting@redhat.com>
738     - don't print errors if /etc/raidtab doesn't exist
739     - or /etc/{modules.conf,conf.modules}, for that matter
740    
741     * Fri Jul 6 2001 Matt Wilson <msw@redhat.com>
742     - don't dig through /etc/fstab to find out if we have a filesystem on
743     a RAID device, it's usually mounted by label so /dev/mdN isn't there
744     at all (#46525)
745    
746     * Tue Jun 26 2001 Bill Nottingham <notting@redhat.com>
747     - require filesystem >= 2.1.0, otherwise we don't boot
748    
749     * Thu Jun 21 2001 Erik Troan <ewt@redhat.com>
750     - added a bunch of commands to nash
751     - use pivot_root
752     - support ext3
753    
754     * Fri Jun 08 2001 Florian La Roche <Florian.LaRoche@redhat.de>
755     - delete the exclusivearch line completely
756    
757     * Fri Mar 23 2001 Matt Wilson <msw@redhat.com>
758     - reset the state of findmodule after getting the modules we need
759    
760     * Wed Feb 28 2001 Matt Wilson <msw@redhat.com>
761     - changed the Requires on mktemp from >= 1.5 to >= 1.5-5 (which included
762     -d support) (#30127)
763    
764     * Fri Feb 23 2001 Erik Troan <ewt@redhat.com>
765     - let nash be invoked as modprobe to avoid a modprobe failure to exec
766     - nash will try to run arbitrary commands now (removing insmod as a special
767     case)
768    
769     * Mon Feb 12 2001 Matt Wilson <msw@redhat.com>
770     - add findutils to Requires line (#27269)
771    
772     * Thu Feb 8 2001 Matt Wilson <msw@redhat.com>
773     - added checks to load the modules i2o_block needs
774    
775     * Wed Feb 7 2001 Bill Nottingham <notting@redhat.com>
776     - fix utterly broken build
777    
778     * Wed Jan 31 2001 Helge Deller <hdeller@redhat.com>
779     - added mandir to nash Makefile (RH 6.x compatibility)
780    
781     * Tue Jan 30 2001 Erik Troan <ewt@redhat.com>
782     - added dependency on mktemp
783    
784     * Thu Jan 25 2001 Erik Troan <ewt@redhat.com>
785     - we need to insert xor.o before raid5.o
786    
787     * Wed Jan 24 2001 Matt Wilson <msw@redhat.com>
788     - code in RAID_AUTORUN ioctl fallback
789     - fixed raidstart check flag from -z to -n
790    
791     * Tue Jan 23 2001 Erik Troan <ewt@redhat.com>
792     - switched to using nash from sash
793    
794     * Tue Jan 23 2001 Matt Wilson <msw@redhat.com>
795     - added patch from twaugh to avoid blindly adding scsi_mod
796     and sd_mod to initrd if they are not needed (#24114)
797    
798     * Thu Jan 11 2001 Bernhard Rosenkraenzer <bero@redhat.com>
799     - Enlarge initrds, needed for systems with both IDE and SCSI
800     (Bug #23846)
801     - Version 2.[6789] probably shouldn't identify itself as 2.6
802     with --version. ;)
803     - bzip2 source
804    
805     * Wed Dec 20 2000 Erik Troan <ewt@redhat.com>
806     - let the kernel autoload ide-cd
807    
808     * Fri Dec 08 2000 Erik Troan <ewt@redhat.com>
809     - added modular ide support
810    
811     * Wed Aug 30 2000 Nalin Dahyabhai <nalin@redhat.com>
812     - use mktemp to create temporary files and directories
813    
814     * Sat Aug 05 2000 Erik Troan <ewt@redhat.com>
815     - changes from Keith Owens for 2.4
816    
817     * Tue Jul 4 2000 Matt Wilson <msw@redhat.com>
818     - build on alpha
819    
820     * Mon Jun 26 2000 Bill Nottingham <notting@redhat.com>
821     - ignore 'unknown' aliases (they shouldn't be there anyways)
822    
823     * Thu Jun 1 2000 Bill Nottingham <notting@redhat.com>
824     - build on ia64
825     - bump up initrd size on ia64
826     - modules.confiscation, /usr/man -> /usr/share/man
827    
828     * Tue May 2 2000 Nalin Dahyabhai <nalin@redhat.com>
829     - make RPM pick up man page, regardless of compression
830    
831     * Tue Feb 29 2000 Matt Wilson <msw@redhat.com>
832     - add requirement for /sbin/losetup
833    
834     * Mon Feb 7 2000 Matt Wilson <msw@redhat.com>
835     - gzip manpage
836    
837     * Thu Feb 3 2000 Matt Wilson <msw@redhat.com>
838     - gzip manpage
839    
840     * Mon Jan 10 2000 Erik Troan <ewt@redhat.com>
841     - use sash, not ash
842    
843     * Mon Jan 3 2000 Matt Wilson <msw@redhat.com>
844     - use ash.static for /bin/sh, not sash
845    
846     * Sat Jan 1 2000 Erik Troan <ewt@redhat.com>
847     - configure loopback devices
848    
849     * Tue Sep 28 1999 Bill Nottingham <notting@redhat.com>
850     - sparc fixup from jakub
851    
852     * Wed Sep 22 1999 Michael K. Johnson <johnsonm@redhat.com>
853     - fix cleanup (blush!)
854    
855     * Tue Sep 21 1999 Michael K. Johnson <johnsonm@redhat.com>
856     - now works when /usr is not mounted (do not rely on /usr/bin/install)
857     - slight cleanups, better usage message
858    
859     * Thu Jul 29 1999 Michael K. Johnson <johnsonm@redhat.com>
860     - Now automatically includes necessary raid modules
861     - --omit-raid-modules now omits raid modules
862     - tiny doc updates
863    
864     * Thu Jul 29 1999 Bill Nottingham <notting@redhat.com>
865     - updates from bugzila (#4243, #4244)
866    
867     * Sat Mar 27 1999 Matt Wilson <msw@redhat.com>
868     - --omit-scsi-modules now omits all scsi modules
869     - updated documentation
870     - mkinitrd now grabs scsi_hostadapter modules from anywhere -
871     some RAID controller modules live in block/
872    
873     * Thu Feb 25 1999 Matt Wilson <msw@redhat.com>
874     - updated description
875    
876     * Mon Jan 11 1999 Matt Wilson <msw@redhat.com>
877     - Ignore the absence of scsi modules, include them if they are there, but
878     don't complain if they are not.
879     - changed --no-scsi-modules to --omit-scsi-modules (as it should have been)
880    
881     * Thu Nov 5 1998 Jeff Johnson <jbj@redhat.com>
882     - import from ultrapenguin 1.1.
883    
884     * Tue Oct 20 1998 Jakub Jelinek <jj@ultra.linux.cz>
885     - fix for combined sparc/sparc64 insmod, also pluto module is really
886     fc4:soc:pluto and we don't look at deps, so special case it.
887    
888     * Sat Aug 29 1998 Erik Troan <ewt@redhat.com>
889     - replaced --needs-scsi-mods (which is now the default) with
890     --omit-scsi-mods
891    
892     * Fri Aug 7 1998 Jeff Johnson <jbj@redhat.com>
893     - correct obscure regex/shell interaction (hardwires tabs on line 232)
894    
895     * Mon Jan 12 1998 Erik Troan <ewt@redhat.com>
896     - added 'make archive' rule to Makefile
897     - rewrote install procedure for more robust version handling
898     - be smarter about grabbing options from /etc/conf.modules
899    
900     * Mon Oct 20 1997 Erik Troan <ewt@redhat.com>
901     - made it use /bin/ash.static
902    
903     * Wed Apr 16 1997 Erik Troan <ewt@redhat.com>
904     - Only use '-s' to install binaries if /usr/bin/strip is present.
905     - Use an image size of 2500 if binaries can't be stripped (1500 otherwise)
906     - Don't use "mount -o loop" anymore -- losetup the proper devices manually
907     - Requires losetup, e2fsprogs
908    
909     * Wed Mar 12 1997 Michael K. Johnson <johnsonm@redhat.com>
910     - Fixed a bug in parsing options.
911     - Changed to use a build tree, then copy the finished tree into the
912     image after it is built.
913     - Added patches derived from ones written by Christian Hechelmann which
914     add an option to put the kernel version number at the end of the module
915     name and use install -s to strip binaries on the fly.

admin@koozali.org
ViewVC Help
Powered by ViewVC 1.2.1 RSS 2.0 feed