/[smeserver]/rpms/mkinitrd/sme7/mkinitrd.spec
ViewVC logotype

Annotation of /rpms/mkinitrd/sme7/mkinitrd.spec

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph


Revision 1.2 - (hide annotations) (download)
Sat Dec 1 02:32:17 2007 UTC (16 years, 11 months ago) by slords
Branch: MAIN
CVS Tags: mkinitrd-4_2_1_13-1_1_el4_sme
Changes since 1.1: +19 -3 lines
Import on branch sme7 of package mkinitrd-4.2.1.13-1.1.el4.sme.src.rpm

1 slords 1.1 Summary: Creates an initial ramdisk image for preloading modules.
2     Name: mkinitrd
3 slords 1.2 Version: 4.2.1.13
4 slords 1.1 Release: 1.1%{?dist}
5     License: GPL
6     Group: System Environment/Base
7     Source: mkinitrd-%{version}.tar.bz2
8 slords 1.2 Patch1: mkinitrd-4.2.1.13-mdassemble.patch
9 slords 1.1 ExclusiveOs: Linux
10     Prereq: dev
11     Requires: e2fsprogs, /bin/sh, fileutils, grep, mount, gzip, tar, /sbin/insmod.static, /sbin/losetup, mktemp >= 1.5-5, findutils, lvm2, kudzu, /usr/bin/which
12     Requires: filesystem >= 2.1.0, cpio
13     Requires: /sbin/mdassemble
14     Conflicts: udev < 0:032
15     BuildRequires: popt
16     BuildRequires: glibc-headers
17     %ifarch i386
18     BuildRequires: dietlibc
19     %endif
20     %ifarch ppc
21     Requires: ppc64-utils >= 0.3-1
22     %endif
23     BuildRoot: %{_tmppath}/%{name}-root
24    
25     %description
26     Mkinitrd creates filesystem images for use as initial ramdisk (initrd)
27     images. These ramdisk images are often used to preload the block
28     device modules (SCSI or RAID) needed to access the root filesystem.
29    
30     In other words, generic kernels can be built without drivers for any
31     SCSI adapters which load the SCSI driver as a module. Since the
32     kernel needs to read those modules, but in this case it isn't able to
33     address the SCSI adapter, an initial ramdisk is used. The initial
34     ramdisk is loaded by the operating system loader (normally LILO) and
35     is available to the kernel as soon as the ramdisk is loaded. The
36     ramdisk image loads the proper SCSI adapter and allows the kernel to
37     mount the root filesystem. The mkinitrd program creates such a
38     ramdisk using information found in the /etc/modules.conf file.
39    
40     %prep
41     %setup -q
42     %patch1 -p1
43    
44     %build
45     make
46     make test
47     if [ $? != 0 ]; then exit 1; fi
48    
49     %install
50     rm -rf $RPM_BUILD_ROOT
51     make BUILDROOT=$RPM_BUILD_ROOT mandir=%{_mandir} install
52    
53     %clean
54     rm -rf $RPM_BUILD_ROOT
55    
56     %files
57     %defattr(-,root,root)
58     %attr(755,root,root) /sbin/mkinitrd
59     %attr(644,root,root) %{_mandir}/man8/mkinitrd.8*
60     %attr(755,root,root) /sbin/nash
61     %attr(644,root,root) %{_mandir}/man8/nash.8*
62     %config %attr(755,root,root) /sbin/installkernel
63     %attr(755,root,root) /sbin/new-kernel-pkg
64     %attr(755,root,root) /sbin/grubby
65     %attr(644,root,root) %{_mandir}/man8/grubby.8*
66    
67     %changelog
68 slords 1.2 * Fri Nov 30 2007 Shad L. Lords <slords@mail.com> 4.2.1.13-1.1.sme
69 slords 1.1 - Clean up spec so package can be built by koji/plague
70     - Use generated config file instead of just scanning [SME: 2192]
71     - Use mdassemble rather than raidautorun in initrd, so that we control
72     UUID to device mapping. [SME: 961, 1895]
73    
74 slords 1.2 * Tue Aug 8 2007 Peter Jones <pjones@redhat.com> - 4.2.1.13-1
75     - Fix linking error
76     Related: #214841
77    
78     * Tue Aug 7 2007 Peter Jones <pjones@redhat.com> - 4.2.1.12-1
79     - Fix "make test" regression
80     Related: #214841
81    
82     * Tue Aug 7 2007 Peter Jones <pjones@redhat.com> - 4.2.1.11-1
83     - Use dynamic buffer for input file.
84     Resolves: #214841
85     - Fix spelling errors in grubby.8
86     Resolves: #230605
87     - Fix "--without-usb" and "--with-usb" handling.
88     Resolves: #246069
89    
90 slords 1.1 * Wed Feb 7 2007 Peter Jones <pjones@redhat.com> - 4.2.1.10-1.1
91     - Fix 'requires' for usb changes.
92     Related: #202070
93    
94     * Fri Jan 31 2007 Peter Jones <pjones@redhat.com> - 4.2.1.10-1
95     - Allow use of usb devices as the root filesystem
96     Resolves: #202070
97    
98     * Thu Jan 30 2007 Peter Jones <pjones@redhat.com> - 4.2.1.9-1
99     - Fix handling of modprobe options when they span multiple lines
100     Resolves: #184544
101    
102     * Mon Apr 10 2006 Peter Jones <pjones@redhat.com> - 4.2.1.8-1
103     - Fix mangling of mount when using device mapper (#171872)
104     - Fix lvm striping (#174678, patch from Bastien Nocera)
105    
106     * Wed Aug 31 2005 Peter Jones <pjones@redhat.com> - 4.2.1.6-1
107     - Handle short reads correctly when dealing with files in /proc (#137816)
108    
109     * Mon Aug 29 2005 Peter Jones <pjones@redhat.com> - 4.2.1.5-1
110     - More fixes for duplicate arguments (#147222)
111    
112     * Mon Apr 4 2005 Peter Jones <pjones@redhat.com> - 4.2.1.5-1
113     - Don't consolidate duplicates in "--args" (#147222)
114    
115     * Fri Apr 1 2005 Peter Jones <pjones@redhat.com> - 4.2.1.4-1
116     - close /init just after reading the file, instead of after runStartup()
117     finishes, so it gets closed before we exec() /sbin/init . (#145601)
118    
119     * Thu Mar 17 2005 Peter Jones <pjones@redhat.com> - 4.2.1.3-1
120     - Don't do vgmknodes (more of #151172)
121    
122     * Tue Mar 15 2005 Peter Jones <pjones@redhat.com> - 4.2.1.2-1
123     - Fix clustered volume group locking in the initrd during vgscan/vgchange,
124     and only activate the volume group / lives on (#151172)
125    
126     * Mon Mar 14 2005 Peter Jones <pjones@redhat.com> - 4.2.1.1-1
127     - Make getArg return NULL on cmd=NULL, fixing #144472 . Based on a
128     patch from Kasper Dupont.
129     - Make nash expand environment variables on command lines (#144474)
130     - Make nash check pids returned from wait*() (#145660)
131    
132     * Wed Nov 3 2004 Jeremy Katz <katzj@redhat.com>
133     - handle machines with lots of disks in /proc/partitions (#137816)
134    
135     * Sun Oct 24 2004 Jeremy Katz <katzj@redhat.com>
136     - require cpio (#136814)
137    
138     * Sun Oct 17 2004 Jeremy Katz <katzj@redhat.com> - 4.1.18-1
139     - fix UPDATEDEFAULT with new-kernel-pkg (#135997)
140    
141     * Fri Oct 15 2004 Jeremy Katz <katzj@redhat.com> - 4.1.17-1
142     - run udevstart again instead of sleeping, this will ensure all
143     devices are created in all cases after modules have been
144     loaded (thanks to notting)
145    
146     * Fri Oct 15 2004 Jeremy Katz <katzj@redhat.com> - 4.1.16-1
147     - mkinitrd: Sleep briefly to let udev finish creating devices
148    
149     * Wed Oct 13 2004 Jeremy Katz <katzj@redhat.com> - 4.1.15-1
150     - new-kernel-pkg: set new kernels as default (#135161) when
151     a) /etc/sysconfig/kernel contains UPDATEDEFAULT=yes
152     b) --package foo is passed in and foo matches DEFAULTKERNEL
153     in /etc/sysconfig/kernel
154    
155     * Thu Sep 30 2004 Jeremy Katz <katzj@redhat.com> - 4.1.14-1
156     - support changing root on the kernel command line with lvm (#133236)
157    
158     * Wed Sep 22 2004 Jeremy Katz <katzj@redhat.com> - 4.1.12-1
159     - update to work with udev 032, conflict with old udev
160     - if udev is present, use it. trying to avoid the use of udev if it's
161     installed is the road to things not working
162    
163     * Fri Sep 10 2004 Jeremy Katz <katzj@redhat.com> - 4.1.11-1
164     - more fixing
165    
166     * Wed Sep 8 2004 Jeremy Katz <katzj@redhat.com> - 4.1.10-1
167     - mkinitrd: mount tmpfs with the right permissions
168    
169     * Tue Aug 31 2004 Jeremy Katz <katzj@redhat.com> - 4.1.9-1
170     - mkinitrd: use tmpfs instead of ramfs for udev stuff
171    
172     * Fri Aug 27 2004 Jeremy Katz <katzj@redhat.com> - 4.1.8-1
173     - nash: and the hack to fix ppc broke other arches, conditionalize it (#130928)
174    
175     * Wed Aug 25 2004 Jeremy Katz <katzj@redhat.com> - 4.1.6-1
176     - nash: fix another off by one (#130987)
177     - nash: hack to fix ppc booting (#130928)
178    
179     * Tue Aug 25 2004 Karsten Hopp <karsten@redhat.com> - 4.1.5-1
180     - fix zfcp handling
181    
182     * Tue Aug 24 2004 Jeremy Katz <katzj@redhat.com> - 4.1.4-1
183     - nash: create raid device if needed (think udev) before calling
184     the raidautorun ioctl (#130561)
185    
186     * Tue Aug 24 2004 Jeremy Katz <katzj@redhat.com> - 4.1.3-1
187     - nash: make echo behavior consistent with other shells
188     - more fixes from Steve Grubb (#129673)
189    
190     * Mon Aug 23 2004 Karsten Hopp <karsten@redhat.de> 4.1.2-1
191     - mkinitrd: add support for zfcp devices (mainframe)
192    
193     * Thu Aug 19 2004 Jeremy Katz <katzj@redhat.com> - 4.1.1-1
194     - don't remove lost+found (#130327)
195     - don't try to mount/umount /sys on 2.4 (#130298)
196    
197     * Tue Aug 17 2004 Jeremy Katz <katzj@redhat.com> - 4.1.0-1
198     - mkinitrd: if using udev for the initrd, set things up appropriately
199     (based on patches from Harald Hoyer and Thomas Woerner)
200     - nash: support for echo -n
201     - nash: better error message on exec failures
202     - nash: exec udev if we're called as a hotplug handler
203    
204     * Mon Aug 16 2004 Jeremy Katz <katzj@redhat.com> - 4.0.6-1
205     - various fixes from a code review by Steve Grubb which should fix
206     some of the lingering problems (#129673)
207     - nash: warning fix from Michal Jaegermann (#129673)
208     - grubby: removal with (hd0,0)
209    
210     * Thu Aug 12 2004 Jeremy Katz <katzj@redhat.com> - 4.0.5-1
211     - nash: oops, let's try that again
212    
213     * Wed Aug 11 2004 Jeremy Katz <katzj@redhat.com> - 4.0.4-1
214     - nash: fix mounting by label in some cases (tracked down by
215     Erik Jacobson, #129581, #129673, #129667, #129635)
216    
217     * Tue Aug 10 2004 Jeremy Katz <katzj@redhat.com> 4.0.3-1
218     - grubby: more (hd0,0) support (#125156)
219     - mkinitrd.8: update manpage (#129585)
220     - nash: fix some warnings
221    
222     * Wed Aug 4 2004 Jeremy Katz <katzj@redhat.com> 4.0.2-1
223     - nash: support bind mounting
224     - grubby: support the (hd0,0)/path syntax for kernels and initrds in
225     grub.conf (#114758, #125156, #120906)
226    
227     * Wed Aug 4 2004 Jeremy Katz <katzj@redhat.com> - 4.0.1-1
228     - improve handling of arguments to init with initramfs (#129057)
229    
230     * Mon Aug 2 2004 Jeremy Katz <katzj@redhat.com> - 4.0.0-1
231     - create an initramfs on 2.6 kernels instead of an initrd
232     - use new mount magic instead of pivot_root
233     on 2.6 kernels
234     - try to handle the case of modules going away on kernel upgrades a
235     little bit more nicely (#123994)
236     - avoid over-zealous creation of /dev/mapper/control (#127115)
237     - improve nash(8) manpage (#127413)
238    
239     * Fri Jun 18 2004 Jeremy Katz <katzj@redhat.com> - 3.5.24-1
240     - fix usb-storage detection with 2.6 (#126309)
241    
242     * Tue May 18 2004 Jeremy Katz <katzj@redhat.com> - 3.5.23-1
243     - add support for RAID6
244    
245     * Wed May 12 2004 Jeremy Katz <katzj@redhat.com>
246     - add support for multipath personality from Tom Callaway (#120379)
247    
248     * Thu May 6 2004 Jeremy Katz <katzj@redhat.com> - 3.5.22-1
249     - bump initrd size (#122325)
250    
251     * Wed Apr 14 2004 Jeremy Katz <katzj@redhat.com> - 3.5.21-1
252     - new-kernel-package: add patch from Ryan Tilder to allow setting new
253     kernel as default (#117605)
254     - mkinitrd: i2o_pci isn't in 2.6 (#120827)
255     - new-kernel-pkg: conditionalize kernel binary name for 2.6 vs 2.4
256     on ppc/ppc64 (as it's vmlinuz in 2.6 instead of the
257     vmlinux from 2.4) (#120868)
258    
259     * Tue Apr 13 2004 Jeremy Katz <katzj@redhat.com> - 3.5.20-1
260     - mkinitrd: minor regex fix for some kernel names (#120624)
261    
262     * Mon Feb 9 2004 Jeremy Katz <katzj@redhat.com> - 3.5.19-1
263     - nash/mkinitrd: quiet mode for nash and necessary mkinitrd changes
264     to work with it
265     - mkinitrd: add lxo's patch for copying lvm.conf (#112099)
266     - new-kernel-pkg: allow specifying the banner used in the boot loader config
267     on the command line (#114809)
268    
269     * Tue Jan 13 2004 Jeremy Katz <katzj@redhat.com>
270     - mkinitrd: add patch from Alex Kiernan for modules with multiple
271     deps in 2.6 (#113306)
272    
273     * Thu Jan 8 2004 Jeremy Katz <katzj@redhat.com> 3.5.18-1
274     - new-kernel-pkg: add a --kernel-arguments option (#113125)
275    
276     * Tue Jan 6 2004 Jeremy Katz <katzj@redhat.com>
277     - fix ybin path (#112939)
278    
279     * Sun Jan 4 2004 Jeremy Katz <katzj@redhat.com> 3.5.17-1
280     - mkinitrd: handle multiple spaces in modules.conf (from Lubomir Bulej)
281     - nash: rebuild against new dietlibc fixing problems with root=LABEL= (#112623)
282     - mkinitrd: determine kernel version and adjust modulefile appropriately
283     so that we look at /etc/modprobe.conf for 2.6 kernels
284     - mkinitrd: first pass at getting lvm working on 2.4 -> 2.6 upgrade
285    
286     * Wed Dec 24 2003 Jeremy Katz <katzj@redhat.com>
287     - mkinitrd: quiet strip by default
288    
289     * Mon Dec 22 2003 Jeremy Katz <katzj@redhat.com> 3.5.16.1-1
290     - make stripping less aggressive
291    
292     * Mon Dec 22 2003 Jeremy Katz <katzj@redhat.com> 3.5.16-1
293     - fixing handling of non-lvm case when /dev/mapper/control isn't present
294     - add patch from Al Viro to get root dev in numeric form by grokking sysfs
295    
296     * Tue Dec 9 2003 Jeremy Katz <katzj@redhat.com>
297     - strip modules if /usr/bin/strip exists (#111756)
298    
299     * Fri Dec 5 2003 Jeremy Katz <katzj@redhat.com> 3.5.15-2
300     - require lvm2 so that it gets installed early enough
301    
302     * Fri Dec 5 2003 Jeremy Katz <katzj@redhat.com> 3.5.15-1
303     - mkinitrd: add support for lvm2 (note: will not currently handle being
304     on a running 2.4 kernel and installing 2.6 with lvm rootfs)
305    
306     * Wed Dec 3 2003 Jeremy Katz <katzj@redhat.com>
307     - nash: add mkdmnod for creating the device-mapper control node
308    
309     * Thu Oct 2 2003 Jeremy Katz <katzj@redhat.com> 3.5.14-1
310     - fix dependency on /usr/bin/tail and /usr/bin/id
311    
312     * Tue Sep 30 2003 Florian La Roche <Florian.LaRoche@redhat.de>
313     - remove one more mktemp dir for "all loopback devices in use" case
314    
315     * Tue Sep 23 2003 Jeremy Katz <katzj@redhat.com> 3.5.13-1
316     - fix getting modules from /lib/modules/$(uname -r)/updates
317    
318     * Mon Sep 22 2003 Jeremy Katz <katzj@redhat.com> 3.5.12-1
319     - argument checking and usage for /sbin/installkernel (#103109)
320    
321     * Wed Sep 3 2003 Jeremy Katz <katzj@redhat.com> 3.5.11-1
322     - really only do grub configs on grub arches
323     - some usb mkinitrd fixes
324    
325     * Fri Aug 29 2003 Jeremy Katz <katzj@redhat.com> 3.5.10-1
326     - clean up bogus warning in installkernel
327     - only try to do grub configs on arches which support grub (#103261)
328    
329     * Thu Aug 7 2003 Matt Wilson <msw@redhat.com> 3.5.9-1
330     - add \n to error messages in grubby
331     - NUL terminate buffer returned from readlink properly
332     - symlinks are most likely relative, chdir to / before trying to
333     follow them
334     - yaboot needs boot prefix
335     - silo needs boot prefix too
336    
337     * Wed Jul 30 2003 Jeremy Katz <katzj@redhat.com>
338     - grubby: don't segfault on label=\n (reported by dburcaw)
339    
340     * Thu Jul 24 2003 Jeremy Katz <katzj@redhat.com>
341     - grubby: patch from zaitcev for uninitialized variable that can get
342     hit in the zipl case
343    
344     * Mon Jul 21 2003 Jeremy Katz <katzj@redhat.com> 3.5.8-1
345     - bump initrd size (#99525)
346    
347     * Wed Jul 9 2003 Jeremy Katz <katzj@redhat.com> 3.5.7-1
348     - pick modules from /lib/modules/$(uname -r)/updates first
349     - be less confused by more than one module of a name
350    
351     * Wed Jun 25 2003 Jeremy Katz <katzj@redhat.com> 3.5.6-1
352     - unbreak reading module options from modules.conf again (#97982)
353    
354     * Fri Jun 20 2003 Bill Nottingham <notting@redhat.com> 3.5.5-1
355     - fix modules.dep usage for 2.5/2.6
356    
357     * Fri Jun 20 2003 Jeremy Katz <katzj@redhat.com> 3.5.4-1
358     - handle more bizarre modules.conf constructs (notting)
359    
360     * Thu Jun 12 2003 Jeremy Katz <katzj@redhat.com> 3.5.3-1
361     - mkinitrd: fix copying of pvs (#97314, #97289)
362     - mkinitrd: use pvscan instead of lvmdiskscan to find PVs to work
363     better on other arches
364     - mkinitrd: better check for dasd existence
365     - mkinitrd: make certain lvm-mod is included if root on lvm
366    
367     * Wed Jun 11 2003 Jeremy Katz <katzj@redhat.com> 3.5.2-1
368     - mkinitrd: revert use of modprobe -c. it breaks in the installer when we
369     don't have a modules.dep for the BOOT kernel
370     - nash: return pivot_root call correctly (#97753)
371    
372     * Wed Jun 11 2003 Jeremy Katz <katzj@redhat.com> 3.5.1-1
373     - nash: fix syscall bits with gcc 3.3 on s390
374     - new-kernel-pkg: do depmod before mkinitrd (#97218)
375    
376     * Tue Jun 10 2003 Jeremy Katz <katzj@redhat.com> 3.5.0-1
377     - mkinitrd: add patch from gc@mandrakesoft.com to determine module
378     deps from modules.dep (#87873)
379     - tweak patch to not break weird cases where module deps aren't all
380     you need :/
381     - grubby: don't remove the last kernel (#60041)
382     - mkinitrd: use modprobe -c to find module options (#89794)
383    
384     * Tue May 20 2003 Matt Wilson <msw@redhat.com> 3.4.52-1
385     - use addSystemMap to build the image for iSeries (#91187)
386    
387     * Fri May 16 2003 Jeremy Katz <katzj@redhat.com> 3.4.51-1
388     - grubby: error out gracefully if we run out of space (#85424)
389     - mkinitrd: copy parent dirs for pvs (#88962)
390     - mkinitrd: exit with an exit status if tar fails (#90123)
391     - new-kernel-pkg: only use the first entry for / (#90155)
392     - grubby: fix a buffer overflow (#90444)
393    
394     * Wed Apr 30 2003 Jeremy Katz <katzj@redhat.com> 3.4.50-1
395     - fix typo in new-kernel-pkg for iSeries
396    
397     * Wed Apr 30 2003 Elliot Lee <sopwith@redhat.com>
398     - BuildRequires: popt
399     - Change grubby Makefile to static-link popt a bit more cleanly
400    
401     * Thu Apr 24 2003 Jeremy Katz <katzj@redhat.com> 3.4.49.1-1
402     - use Arjan's suggestion of vmlinitrd for the kernel + initrd combo file
403    
404     * Thu Apr 24 2003 Jeremy Katz <katzj@redhat.com> 3.4.49-2
405     - fix description referencing /etc/conf.modules (#89558)
406    
407     * Thu Apr 24 2003 Jeremy Katz <katzj@redhat.com> 3.4.49-2
408     - require ppc64-utils on ppc
409    
410     * Fri Apr 18 2003 Jeremy Katz <katzj@redhat.com> 3.4.49-1
411     - new-kernel-pkg: on iSeries, we don't have a boot loader, just make the
412     kernel + initrd combo file (/boot/vmlinux-version.img)
413    
414     * Mon Apr 07 2003 Karsten Hopp <karsten@redhat.com> 3.4.48-1
415     - Fix segfault on mainframe
416    
417     * Wed Mar 26 2003 Jeremy Katz <katzj@redhat.com> 3.4.47-1
418     - mkinitrd: fix using options for loading modules
419     - mkinitrd: don't use kernel parameters for dasd at mkinitrd time,
420     use what's in modules.conf
421    
422     * Mon Mar 24 2003 Jeremy Katz <katzj@redhat.com> 3.4.46-1
423     - new-kernel-pkg: add necessary bits for s390, some logic cleanups
424     - grubby: fix root detection for s390{,x}
425    
426     * Sun Mar 23 2003 Jeremy Katz <katzj@redhat.com> 3.4.45-1
427     - grubby: add silo support (sparc)
428     - grubby: add zipl support (s390{,x})
429     - add grubby test cases for zipl support
430    
431     * Wed Mar 19 2003 Jeremy Katz <katzj@redhat.com> 3.4.44.1-1
432     - fix dasd option reading
433    
434     * Fri Mar 14 2003 Phil Knirsch <pknirsch@redhat.com> 3.4.44
435     - Added automatic dasd= parameters for kernel parameter on s390(x).
436    
437     * Tue Mar 4 2003 Jeremy Katz <katzj@redhat.com> 3.4.43-1
438     - apply ppc patches for new-kernel-pkg and installkernel from Dan
439     Burcaw <dburcaw@terrasoftsolutions.com>
440     - man page tweak (#85471)
441    
442     * Tue Feb 18 2003 Jeremy Katz <katzj@redhat.com> 3.4.42-1
443     - grubby: fix segfault from uninitialized variable (#84128)
444    
445     * Tue Feb 11 2003 Jeremy Katz <katzj@redhat.com> 3.4.41-1
446     - nash: add readlink
447     - use readlink for rootdev to handle symlinks to root devs (#83391)
448    
449     * Tue Feb 4 2003 Jeremy Katz <katzj@redhat.com> 3.4.40-1
450     - fix i2o module ordering (#83447)
451     - ifarch'd build requires of dietlibc now that the build system has a way to
452     handle these
453    
454     * Sat Feb 01 2003 Florian La Roche <Florian.LaRoche@redhat.de>
455     - change one test from a number to a string test that could otherwise
456     fail in not properly setup chroot environments
457    
458     * Fri Jan 31 2003 <ewt@redhat.com>
459     - added support for yaboot
460     - test script runs tests for all platforms
461     - separated elilo configuration from lilo mode, allowing elilo specific
462     tests to be run on any platform
463    
464     * Sun Jan 26 2003 <ewt@redhat.com>
465     - grubby now shortens lilo titles to ensure they are less then 16 characters
466     long (76236)
467     - mkinitrd would only turn on /dev/md0 if raid was needed; now it enables
468     all raid devices listed in /proc/mdstat (82209)
469     - use product name from /etc/redhat-release to generate label in grub.conf
470     (82352)
471    
472     * Mon Jan 20 2003 Bill Nottingham <notting@redhat.com> 3.4.36-1
473     - don't error out running awk on /proc/mdstat if /proc/mdstat isn't
474     there
475    
476     * Tue Jan 14 2003 <ewt@redhat.com>
477     - all mkdev() actions will create directories as needed (some code in
478     mkdevices is now obsolete; I'll remove it later) (#73317)
479     - added mkdev command to test the above
480     - support diratime/nodiratime mount options (#78738)
481     - grubby will follow symlinks when writing new config file (#78713)
482     - don't depend on raidtab, use /proc/mdstat instead (#80424) this covers
483     both mkinitrd and grubby
484    
485     * Sun Jan 5 2003 Jeremy Katz <katzj@redhat.com> 3.4.34-1
486     - grubby: fix segfault finding default if default doesn't have a root= (#66000)
487     - don't include usb modules by default. pass --with-usb to get usb modules
488     - make sure kudzu exists before trying to exec it
489     - handle multiple scsi hosts being present (#77422)
490     - add /usr/sbin to default path (#79581)
491     - fix using --builtin= (#80448)
492     - grubby: preserve the mode on config files (#80776)
493    
494     * Mon Dec 16 2002 Jeremy Katz <katzj@redhat.com>
495     - errno fixes
496    
497     * Tue Dec 03 2002 Florian La Roche <Florian.LaRoche@redhat.de>
498     - /sbin/new-kernel-pkg: fix a test to have correct ""
499    
500     * Fri Nov 22 2002 Jeremy Katz <katzj@redhat.com>
501     - mkinitrd: more gzipped module fixes
502    
503     * Thu Nov 21 2002 Jeremy Katz <katzj@redhat.com>
504     - mkinitrd: add support for finding gzipped modules
505     - mkinitrd: don't be noisy if we don't have lvm-mod loaded
506    
507     * Wed Nov 6 2002 Jeremy Katz <katzj@redhat.com>
508     - grubby: don't bail when looking for root in appends of lilo-style configs
509     - include grubby on x86_64
510    
511     * Thu Sep 26 2002 Nalin Dahyabhai <nalin@redhat.com>
512     - fix some syntax errors
513     - use grep's -q flag to save a redirect in places where we're not redirecting
514     stderr
515    
516     * Thu Sep 5 2002 Jeremy Katz <katzj@redhat.com>
517     - grubby could segfault by going into its lilo checking if it couldn't find
518     a default to copy (default had no root= and --bad-image-okay wasn't
519     being used)
520    
521     * Mon Sep 2 2002 Jeremy Katz <katzj@redhat.com>
522     - nash: create directories if needed in mkdevices command (#73090)
523     - grubby: handle lilo case of non-linux default (#72202)
524    
525     * Sat Aug 31 2002 Jeremy Katz <katzj@redhat.com>
526     - grubby: fix for case like 'append = " hdc=ide-scsi "' (#68802)
527    
528     * Fri Aug 30 2002 Bill Nottingham <notting@redhat.com>
529     - fix firewire stuff (#72916)
530    
531     * Fri Aug 23 2002 Bill Nottingham <notting@redhat.com>
532     - fix mpt fusion stuff
533    
534     * Tue Aug 13 2002 Jeremy Katz <katzj@redhat.com>
535     - /boot/efi/redhat -> /boot/efi/EFI/redhat on ia64
536    
537     * Sun Aug 11 2002 Jeremy Katz <katzj@redhat.com>
538     - fix grubby to work correctly on ia64
539    
540     * Thu Aug 08 2002 Michael Fulbright <msf@redhat.com>
541     - added sleep command to nash and fixed creating initrd with / or /boot on usb
542    
543     * Tue Jul 30 2002 Jeremy Katz <katzj@redhat.com>
544     - grubby: adding kernels to lilo.conf when not using root=LABEL will work
545     now too
546    
547     * Fri Jul 26 2002 Erik Troan <ewt@redhat.com>
548     - didn't close /proc/partitions in mkdevices
549    
550     * Thu Jul 25 2002 Jeremy Katz <katzj@redhat.com>
551     - grubby: fix adding kernels to lilo when using root=LABEL
552    
553     * Wed Jul 24 2002 Erik Troan <ewt@redhat.com>
554     - added and used mkdevices command (68959)
555    
556     * Wed Jul 17 2002 Erik Troan <ewt@redhat.com>
557     - do proper probing to check root=LABEL
558     - --bootloader-probe didn't support /etc/sysconfig/grub
559    
560     * Fri Jul 12 2002 Erik Troan <ewt@redhat.com>
561     - don't sanity check root=LABEL right now; probing might make sense?
562    
563     * Wed Jul 10 2002 Erik Troan <ewt@redhat.com>
564     - --ifneeded is obsolete; we always need initrds
565     - grubby lets you specify multiple indexes for --info
566     - grubby lets you select kernels by title
567     - added showlabels to nash
568     - new-kernel-pkg sets the root device from /etc/fstab rather then inheriting it
569     - new-kernel-pkg removes all entries w/ a duplicate label (67459)
570    
571     * Mon Jul 08 2002 Erik Troan <ewt@redhat.com>
572     - usb root device code could fail, causing no initrd to be made
573    
574     * Thu Jun 27 2002 Erik Troan <ewt@redhat.com>
575     - grubby didn't add new kernels properly
576    
577     * Thu Jun 27 2002 Erik Troan <ewt@redhat.com>
578     - support root on usb devices
579    
580     * Wed Jun 26 2002 Erik Troan <ewt@redhat.com>
581     - other= in lilo.conf wasn't being parsed out properly
582    
583     * Mon Jun 24 2002 Erik Troan <ewt@redhat.com>
584     - changed --add-kernel implementation so that --args gets handled properly
585    
586     * Sun Jun 23 2002 Erik Troan <ewt@redhat.com>
587     - added loadinitrd (used by mkbootdisk) on ia32 and sparc
588     - modules "off" and "null" should be ignored (67086)
589     - mkrootdev looks for root=LABEL=/ in /proc/cmdline, so root by label
590     works again (fully determined by root= kernel parameter)
591     - added --update-kernel and --remove-args arguments to grubby
592     - kernel specification of ALL supported by grubby
593     - DEFAULT accepted much more consistently
594     - grubby --info displays info on all kernels specified, not just the first
595     - ext3 need mbcache now (67354)
596     - grubby allows config file entry numbers to be used as kernel paths
597     - support /etc/sysconfig/grub.conf
598     - display lba info from lilo.conf file in --info
599    
600     * Thu Jun 13 2002 Jeremy Katz <katzj@redhat.com>
601     - don't run lilo twice on kernel removal in new-kernel-pkg
602     - don't run grubby to add/remove kernels from new-kernel-pkg if
603     bootloader config doesn't
604    
605     * Tue Jun 11 2002 Erik Troan <ewt@redhat.com>
606     - added --bootloader-probe to grubby
607     - wrote a man page for grubby
608     - include grubby on ia64
609     - updated new-kernel-pkg to work with lilo/elilo
610     - added --info=DEFAULT option
611    
612     * Mon Jun 10 2002 Jeremy Katz <katzj@redhat.com>
613     - start raid before lvm so that you can have root on lvm on raid (#66175)
614    
615     * Tue Jun 04 2002 Erik Troan <ewt@redhat.com>
616     - failed to initialize a variable in grubby
617    
618     * Fri May 31 2002 Erik Troan <ewt@redhat.com>
619     - added --grub option so grub tests could run on ia64
620     - added some basic tests of lilo default directive handling
621    
622     * Wed May 29 2002 Jeremy Katz <katzj@redhat.com>
623     - require lvm
624    
625     * Tue May 28 2002 Bill Nottingham <notting@redhat.com>
626     - fix umounting of /initrd when pivoting
627    
628     * Tue May 28 2002 Erik Troan <ewt@redhat.com>
629     - marked /sbin/installkernel as %config (53006)
630     - run make test during build
631    
632     * Wed May 22 2002 Erik Troan <ewt@redhat.com>
633     - added --nopivot (53679)
634     - honor INSTALL_PATH in installkernel (32833)
635     - installkernel versions old kernels as well (52756)
636     - lilo support added to grubby
637    
638     * Tue May 21 2002 Erik Troan <ewt@redhat.com>
639     - cleaned up usage message
640     - added --omit-lvm-modules to man page
641     - added --builtin option (65250)
642     - skip comments in fstab (65249)
643     - added findlodev to nash, use that to pick block device (63421)
644     - support -o option in nash's mount (59185)
645     - look for xfs_dmapi (60066)
646     - added > support for executed commands (61180)
647     - grubby copies permissions from old config file (59227)
648     - use options from fstab for root filesystem (56071)
649     - try and be better about returning nonzero on error (60203)
650     - make modprobe symlink properly to avoid kernel message (62145)
651     - support linear raid (12775)
652     - support fallback option in grub config (54794)
653     - comments in template entries not handled quite right (65198)
654    
655     * Sat Apr 20 2002 Erik Troan <ewt@redhat.com>
656     - grubby does a better job of not adding superfluous default= lines
657    
658     * Wed Apr 17 2002 Erik Troan <ewt@redhat.com>
659     - preload works again
660    
661     * Wed Apr 10 2002 Jeremy Katz <katzj@redhat.com>
662     - revert to not mounting by label
663    
664     * Fri Apr 5 2002 Jeremy Katz <katzj@redhat.com>
665     - include pbrown's changes to load parport_pc when needing ppa.o (#35360)
666    
667     * Thu Apr 4 2002 Jeremy Katz <katzj@redhat.com>
668     - fix redirection bug (#62623)
669     - create proper link of /sbin->/bin in initrd (#62199)
670    
671     * Thu Mar 28 2002 Jeremy Katz <katzj@redhat.com>
672     - prereq dev package so that we always have the dev package before we get run
673    
674     * Fri Mar 22 2002 Jeremy Katz <katzj@redhat.com>
675     - duh, that won't work. fix it
676     - don't require lvm tools right now
677    
678     * Thu Mar 21 2002 Jeremy Katz <katzj@redhat.com>
679     - fix nash to create directories for devices like cciss and ida
680    
681     * Tue Feb 5 2002 Bill Nottingham <notting@redhat.com>
682     - run mkinitrd with -f in new-kernel-pkg
683     - don't run lilo in /sbin/installkernel
684    
685     * Fri Feb 1 2002 Jeremy Katz <katzj@redhat.com>
686     - require lvm
687    
688     * Thu Jan 31 2002 Jeremy Katz <katzj@redhat.com>
689     - clean up warnings for when /proc isn't mounted
690    
691     * Tue Jan 29 2002 Jeremy Katz <katzj@redhat.com>
692     - fix probing for LVM usage to require a volume group to exist before adding
693     the module
694     - --omit-lvm-modules will omit LVM modules
695     - add support for root device being LVM
696    
697     * Wed Jan 16 2002 Erik Troan <ewt@redhat.com>
698     - look for a non /tmpfs directory
699     - added support for xfs
700     - use with raid md.o if it exists
701     - fixed bug in echo
702     - use find form nash rather then /usr (mkinitrd shouldn't need /usr
703     mounted)
704    
705     * Fri Jan 11 2002 Erik Troan <ewt@redhat.com>
706     - added support for mounting root filesystem by label
707     - switched to dietlibc from minilibc
708     - fix so --preload= works [33675,57560,44377]
709     - added info on --image-version and --nocompress to man page [57560]
710     - set fileystem check interval to 0 in case the system clock
711     is borked [51454]
712     - give a proper error when run by a user other then root [27218,53159]
713     - grubby statically linked against popt [55305]
714     - cleaned up verbose output a bit [21791]
715    
716     * Tue Dec 18 2001 Trond Eivind Glomsrød <teg@redhat.com>
717     - Add LVM module when LVM is used
718    
719     * Wed Sep 5 2001 Jeremy Katz <katzj@redhat.com>
720     - grubby shouldn't blow away default=saved lines (#52981)
721    
722     * Fri Aug 31 2001 Jeremy Katz <katzj@redhat.com>
723     - fix new-kernel-pkg --mkinitrd for ia64
724    
725     * Thu Aug 30 2001 Erik Troan <ewt@redhat.com>
726     - fixed bug handling invalid default (MF #52889)
727     - in some cases we would set the default to point at a removed image
728    
729     * Wed Aug 29 2001 Erik Troan <ewt@redhat.com>
730     - minor grubby fixes
731    
732     * Tue Aug 28 2001 Jeremy Katz <katzj@redhat.com>
733     - let new-kernel-pkg be able to do more (initrds, modules.*)
734     - include grubby only on x86
735    
736     * Mon Aug 27 2001 Jeremy Katz <katzj@redhat.com>
737     - more grubby fixups for having a /boot
738     - added new-kernel-pkg
739    
740     * Sun Aug 26 2001 Erik Troan <ewt@redhat.com>
741     - added grubby
742     - added installkernel
743    
744     * Fri Aug 3 2001 Matt Wilson <msw@redhat.com>
745     - make consoles with the correct minor numbers
746     - applied patch from hjl to fix fstab parsing (#50819)
747    
748     * Fri Jul 20 2001 Jeremy Katz <katzj@redhat.com>
749     - skip errors finding jbd as a module if we're skipping them trying to find
750     ext3 so that you can build a kernel with ext3 built-in and still use an
751     initrd
752    
753     * Wed Jul 11 2001 Bill Nottingham <notting@redhat.com>
754     - don't print errors if /etc/raidtab doesn't exist
755     - or /etc/{modules.conf,conf.modules}, for that matter
756    
757     * Fri Jul 6 2001 Matt Wilson <msw@redhat.com>
758     - don't dig through /etc/fstab to find out if we have a filesystem on
759     a RAID device, it's usually mounted by label so /dev/mdN isn't there
760     at all (#46525)
761    
762     * Tue Jun 26 2001 Bill Nottingham <notting@redhat.com>
763     - require filesystem >= 2.1.0, otherwise we don't boot
764    
765     * Thu Jun 21 2001 Erik Troan <ewt@redhat.com>
766     - added a bunch of commands to nash
767     - use pivot_root
768     - support ext3
769    
770     * Fri Jun 08 2001 Florian La Roche <Florian.LaRoche@redhat.de>
771     - delete the exclusivearch line completely
772    
773     * Fri Mar 23 2001 Matt Wilson <msw@redhat.com>
774     - reset the state of findmodule after getting the modules we need
775    
776     * Wed Feb 28 2001 Matt Wilson <msw@redhat.com>
777     - changed the Requires on mktemp from >= 1.5 to >= 1.5-5 (which included
778     -d support) (#30127)
779    
780     * Fri Feb 23 2001 Erik Troan <ewt@redhat.com>
781     - let nash be invoked as modprobe to avoid a modprobe failure to exec
782     - nash will try to run arbitrary commands now (removing insmod as a special
783     case)
784    
785     * Mon Feb 12 2001 Matt Wilson <msw@redhat.com>
786     - add findutils to Requires line (#27269)
787    
788     * Thu Feb 8 2001 Matt Wilson <msw@redhat.com>
789     - added checks to load the modules i2o_block needs
790    
791     * Wed Feb 7 2001 Bill Nottingham <notting@redhat.com>
792     - fix utterly broken build
793    
794     * Wed Jan 31 2001 Helge Deller <hdeller@redhat.com>
795     - added mandir to nash Makefile (RH 6.x compatibility)
796    
797     * Tue Jan 30 2001 Erik Troan <ewt@redhat.com>
798     - added dependency on mktemp
799    
800     * Thu Jan 25 2001 Erik Troan <ewt@redhat.com>
801     - we need to insert xor.o before raid5.o
802    
803     * Wed Jan 24 2001 Matt Wilson <msw@redhat.com>
804     - code in RAID_AUTORUN ioctl fallback
805     - fixed raidstart check flag from -z to -n
806    
807     * Tue Jan 23 2001 Erik Troan <ewt@redhat.com>
808     - switched to using nash from sash
809    
810     * Tue Jan 23 2001 Matt Wilson <msw@redhat.com>
811     - added patch from twaugh to avoid blindly adding scsi_mod
812     and sd_mod to initrd if they are not needed (#24114)
813    
814     * Thu Jan 11 2001 Bernhard Rosenkraenzer <bero@redhat.com>
815     - Enlarge initrds, needed for systems with both IDE and SCSI
816     (Bug #23846)
817     - Version 2.[6789] probably shouldn't identify itself as 2.6
818     with --version. ;)
819     - bzip2 source
820    
821     * Wed Dec 20 2000 Erik Troan <ewt@redhat.com>
822     - let the kernel autoload ide-cd
823    
824     * Fri Dec 08 2000 Erik Troan <ewt@redhat.com>
825     - added modular ide support
826    
827     * Wed Aug 30 2000 Nalin Dahyabhai <nalin@redhat.com>
828     - use mktemp to create temporary files and directories
829    
830     * Sat Aug 05 2000 Erik Troan <ewt@redhat.com>
831     - changes from Keith Owens for 2.4
832    
833     * Tue Jul 4 2000 Matt Wilson <msw@redhat.com>
834     - build on alpha
835    
836     * Mon Jun 26 2000 Bill Nottingham <notting@redhat.com>
837     - ignore 'unknown' aliases (they shouldn't be there anyways)
838    
839     * Thu Jun 1 2000 Bill Nottingham <notting@redhat.com>
840     - build on ia64
841     - bump up initrd size on ia64
842     - modules.confiscation, /usr/man -> /usr/share/man
843    
844     * Tue May 2 2000 Nalin Dahyabhai <nalin@redhat.com>
845     - make RPM pick up man page, regardless of compression
846    
847     * Tue Feb 29 2000 Matt Wilson <msw@redhat.com>
848     - add requirement for /sbin/losetup
849    
850     * Mon Feb 7 2000 Matt Wilson <msw@redhat.com>
851     - gzip manpage
852    
853     * Thu Feb 3 2000 Matt Wilson <msw@redhat.com>
854     - gzip manpage
855    
856     * Mon Jan 10 2000 Erik Troan <ewt@redhat.com>
857     - use sash, not ash
858    
859     * Mon Jan 3 2000 Matt Wilson <msw@redhat.com>
860     - use ash.static for /bin/sh, not sash
861    
862     * Sat Jan 1 2000 Erik Troan <ewt@redhat.com>
863     - configure loopback devices
864    
865     * Tue Sep 28 1999 Bill Nottingham <notting@redhat.com>
866     - sparc fixup from jakub
867    
868     * Wed Sep 22 1999 Michael K. Johnson <johnsonm@redhat.com>
869     - fix cleanup (blush!)
870    
871     * Tue Sep 21 1999 Michael K. Johnson <johnsonm@redhat.com>
872     - now works when /usr is not mounted (do not rely on /usr/bin/install)
873     - slight cleanups, better usage message
874    
875     * Thu Jul 29 1999 Michael K. Johnson <johnsonm@redhat.com>
876     - Now automatically includes necessary raid modules
877     - --omit-raid-modules now omits raid modules
878     - tiny doc updates
879    
880     * Thu Jul 29 1999 Bill Nottingham <notting@redhat.com>
881     - updates from bugzila (#4243, #4244)
882    
883     * Sat Mar 27 1999 Matt Wilson <msw@redhat.com>
884     - --omit-scsi-modules now omits all scsi modules
885     - updated documentation
886     - mkinitrd now grabs scsi_hostadapter modules from anywhere -
887     some RAID controller modules live in block/
888    
889     * Thu Feb 25 1999 Matt Wilson <msw@redhat.com>
890     - updated description
891    
892     * Mon Jan 11 1999 Matt Wilson <msw@redhat.com>
893     - Ignore the absence of scsi modules, include them if they are there, but
894     don't complain if they are not.
895     - changed --no-scsi-modules to --omit-scsi-modules (as it should have been)
896    
897     * Thu Nov 5 1998 Jeff Johnson <jbj@redhat.com>
898     - import from ultrapenguin 1.1.
899    
900     * Tue Oct 20 1998 Jakub Jelinek <jj@ultra.linux.cz>
901     - fix for combined sparc/sparc64 insmod, also pluto module is really
902     fc4:soc:pluto and we don't look at deps, so special case it.
903    
904     * Sat Aug 29 1998 Erik Troan <ewt@redhat.com>
905     - replaced --needs-scsi-mods (which is now the default) with
906     --omit-scsi-mods
907    
908     * Fri Aug 7 1998 Jeff Johnson <jbj@redhat.com>
909     - correct obscure regex/shell interaction (hardwires tabs on line 232)
910    
911     * Mon Jan 12 1998 Erik Troan <ewt@redhat.com>
912     - added 'make archive' rule to Makefile
913     - rewrote install procedure for more robust version handling
914     - be smarter about grabbing options from /etc/conf.modules
915    
916     * Mon Oct 20 1997 Erik Troan <ewt@redhat.com>
917     - made it use /bin/ash.static
918    
919     * Wed Apr 16 1997 Erik Troan <ewt@redhat.com>
920     - Only use '-s' to install binaries if /usr/bin/strip is present.
921     - Use an image size of 2500 if binaries can't be stripped (1500 otherwise)
922     - Don't use "mount -o loop" anymore -- losetup the proper devices manually
923     - Requires losetup, e2fsprogs
924    
925     * Wed Mar 12 1997 Michael K. Johnson <johnsonm@redhat.com>
926     - Fixed a bug in parsing options.
927     - Changed to use a build tree, then copy the finished tree into the
928     image after it is built.
929     - Added patches derived from ones written by Christian Hechelmann which
930     add an option to put the kernel version number at the end of the module
931     name and use install -s to strip binaries on the fly.

admin@koozali.org
ViewVC Help
Powered by ViewVC 1.2.1 RSS 2.0 feed