/[smeserver]/rpms/mkinitrd/sme7/mkinitrd.spec
ViewVC logotype

Contents of /rpms/mkinitrd/sme7/mkinitrd.spec

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph


Revision 1.1 - (show annotations) (download)
Tue Jun 12 16:36:24 2007 UTC (17 years, 4 months ago) by slords
Branch: MAIN
CVS Tags: mkinitrd-4_2_1_10-1_1_el4_sme
Import on branch sme7 of package mkinitrd-4.2.1.10-1.1.el4.sme.src.rpm

1 Summary: Creates an initial ramdisk image for preloading modules.
2 Name: mkinitrd
3 Version: 4.2.1.10
4 Release: 1.1%{?dist}
5 License: GPL
6 Group: System Environment/Base
7 Source: mkinitrd-%{version}.tar.bz2
8 Patch1: mkinitrd-4.2.1.10-mdassemble.patch
9 ExclusiveOs: Linux
10 Prereq: dev
11 Requires: e2fsprogs, /bin/sh, fileutils, grep, mount, gzip, tar, /sbin/insmod.static, /sbin/losetup, mktemp >= 1.5-5, findutils, lvm2, kudzu, /usr/bin/which
12 Requires: filesystem >= 2.1.0, cpio
13 Requires: /sbin/mdassemble
14 Conflicts: udev < 0:032
15 BuildRequires: popt
16 BuildRequires: glibc-headers
17 %ifarch i386
18 BuildRequires: dietlibc
19 %endif
20 %ifarch ppc
21 Requires: ppc64-utils >= 0.3-1
22 %endif
23 BuildRoot: %{_tmppath}/%{name}-root
24
25 %description
26 Mkinitrd creates filesystem images for use as initial ramdisk (initrd)
27 images. These ramdisk images are often used to preload the block
28 device modules (SCSI or RAID) needed to access the root filesystem.
29
30 In other words, generic kernels can be built without drivers for any
31 SCSI adapters which load the SCSI driver as a module. Since the
32 kernel needs to read those modules, but in this case it isn't able to
33 address the SCSI adapter, an initial ramdisk is used. The initial
34 ramdisk is loaded by the operating system loader (normally LILO) and
35 is available to the kernel as soon as the ramdisk is loaded. The
36 ramdisk image loads the proper SCSI adapter and allows the kernel to
37 mount the root filesystem. The mkinitrd program creates such a
38 ramdisk using information found in the /etc/modules.conf file.
39
40 %prep
41 %setup -q
42 %patch1 -p1
43
44 %build
45 make
46 make test
47 if [ $? != 0 ]; then exit 1; fi
48
49 %install
50 rm -rf $RPM_BUILD_ROOT
51 make BUILDROOT=$RPM_BUILD_ROOT mandir=%{_mandir} install
52
53 %clean
54 rm -rf $RPM_BUILD_ROOT
55
56 %files
57 %defattr(-,root,root)
58 %attr(755,root,root) /sbin/mkinitrd
59 %attr(644,root,root) %{_mandir}/man8/mkinitrd.8*
60 %attr(755,root,root) /sbin/nash
61 %attr(644,root,root) %{_mandir}/man8/nash.8*
62 %config %attr(755,root,root) /sbin/installkernel
63 %attr(755,root,root) /sbin/new-kernel-pkg
64 %attr(755,root,root) /sbin/grubby
65 %attr(644,root,root) %{_mandir}/man8/grubby.8*
66
67 %changelog
68 * Wed May 9 2007 Shad L. Lords <slords@mail.com> 4.2.1.10-1.1.sme
69 - Clean up spec so package can be built by koji/plague
70 - Use generated config file instead of just scanning [SME: 2192]
71 - Use mdassemble rather than raidautorun in initrd, so that we control
72 UUID to device mapping. [SME: 961, 1895]
73
74 * Wed Feb 7 2007 Peter Jones <pjones@redhat.com> - 4.2.1.10-1.1
75 - Fix 'requires' for usb changes.
76 Related: #202070
77
78 * Fri Jan 31 2007 Peter Jones <pjones@redhat.com> - 4.2.1.10-1
79 - Allow use of usb devices as the root filesystem
80 Resolves: #202070
81
82 * Thu Jan 30 2007 Peter Jones <pjones@redhat.com> - 4.2.1.9-1
83 - Fix handling of modprobe options when they span multiple lines
84 Resolves: #184544
85
86 * Mon Apr 10 2006 Peter Jones <pjones@redhat.com> - 4.2.1.8-1
87 - Fix mangling of mount when using device mapper (#171872)
88 - Fix lvm striping (#174678, patch from Bastien Nocera)
89
90 * Wed Aug 31 2005 Peter Jones <pjones@redhat.com> - 4.2.1.6-1
91 - Handle short reads correctly when dealing with files in /proc (#137816)
92
93 * Mon Aug 29 2005 Peter Jones <pjones@redhat.com> - 4.2.1.5-1
94 - More fixes for duplicate arguments (#147222)
95
96 * Mon Apr 4 2005 Peter Jones <pjones@redhat.com> - 4.2.1.5-1
97 - Don't consolidate duplicates in "--args" (#147222)
98
99 * Fri Apr 1 2005 Peter Jones <pjones@redhat.com> - 4.2.1.4-1
100 - close /init just after reading the file, instead of after runStartup()
101 finishes, so it gets closed before we exec() /sbin/init . (#145601)
102
103 * Thu Mar 17 2005 Peter Jones <pjones@redhat.com> - 4.2.1.3-1
104 - Don't do vgmknodes (more of #151172)
105
106 * Tue Mar 15 2005 Peter Jones <pjones@redhat.com> - 4.2.1.2-1
107 - Fix clustered volume group locking in the initrd during vgscan/vgchange,
108 and only activate the volume group / lives on (#151172)
109
110 * Mon Mar 14 2005 Peter Jones <pjones@redhat.com> - 4.2.1.1-1
111 - Make getArg return NULL on cmd=NULL, fixing #144472 . Based on a
112 patch from Kasper Dupont.
113 - Make nash expand environment variables on command lines (#144474)
114 - Make nash check pids returned from wait*() (#145660)
115
116 * Wed Nov 3 2004 Jeremy Katz <katzj@redhat.com>
117 - handle machines with lots of disks in /proc/partitions (#137816)
118
119 * Sun Oct 24 2004 Jeremy Katz <katzj@redhat.com>
120 - require cpio (#136814)
121
122 * Sun Oct 17 2004 Jeremy Katz <katzj@redhat.com> - 4.1.18-1
123 - fix UPDATEDEFAULT with new-kernel-pkg (#135997)
124
125 * Fri Oct 15 2004 Jeremy Katz <katzj@redhat.com> - 4.1.17-1
126 - run udevstart again instead of sleeping, this will ensure all
127 devices are created in all cases after modules have been
128 loaded (thanks to notting)
129
130 * Fri Oct 15 2004 Jeremy Katz <katzj@redhat.com> - 4.1.16-1
131 - mkinitrd: Sleep briefly to let udev finish creating devices
132
133 * Wed Oct 13 2004 Jeremy Katz <katzj@redhat.com> - 4.1.15-1
134 - new-kernel-pkg: set new kernels as default (#135161) when
135 a) /etc/sysconfig/kernel contains UPDATEDEFAULT=yes
136 b) --package foo is passed in and foo matches DEFAULTKERNEL
137 in /etc/sysconfig/kernel
138
139 * Thu Sep 30 2004 Jeremy Katz <katzj@redhat.com> - 4.1.14-1
140 - support changing root on the kernel command line with lvm (#133236)
141
142 * Wed Sep 22 2004 Jeremy Katz <katzj@redhat.com> - 4.1.12-1
143 - update to work with udev 032, conflict with old udev
144 - if udev is present, use it. trying to avoid the use of udev if it's
145 installed is the road to things not working
146
147 * Fri Sep 10 2004 Jeremy Katz <katzj@redhat.com> - 4.1.11-1
148 - more fixing
149
150 * Wed Sep 8 2004 Jeremy Katz <katzj@redhat.com> - 4.1.10-1
151 - mkinitrd: mount tmpfs with the right permissions
152
153 * Tue Aug 31 2004 Jeremy Katz <katzj@redhat.com> - 4.1.9-1
154 - mkinitrd: use tmpfs instead of ramfs for udev stuff
155
156 * Fri Aug 27 2004 Jeremy Katz <katzj@redhat.com> - 4.1.8-1
157 - nash: and the hack to fix ppc broke other arches, conditionalize it (#130928)
158
159 * Wed Aug 25 2004 Jeremy Katz <katzj@redhat.com> - 4.1.6-1
160 - nash: fix another off by one (#130987)
161 - nash: hack to fix ppc booting (#130928)
162
163 * Tue Aug 25 2004 Karsten Hopp <karsten@redhat.com> - 4.1.5-1
164 - fix zfcp handling
165
166 * Tue Aug 24 2004 Jeremy Katz <katzj@redhat.com> - 4.1.4-1
167 - nash: create raid device if needed (think udev) before calling
168 the raidautorun ioctl (#130561)
169
170 * Tue Aug 24 2004 Jeremy Katz <katzj@redhat.com> - 4.1.3-1
171 - nash: make echo behavior consistent with other shells
172 - more fixes from Steve Grubb (#129673)
173
174 * Mon Aug 23 2004 Karsten Hopp <karsten@redhat.de> 4.1.2-1
175 - mkinitrd: add support for zfcp devices (mainframe)
176
177 * Thu Aug 19 2004 Jeremy Katz <katzj@redhat.com> - 4.1.1-1
178 - don't remove lost+found (#130327)
179 - don't try to mount/umount /sys on 2.4 (#130298)
180
181 * Tue Aug 17 2004 Jeremy Katz <katzj@redhat.com> - 4.1.0-1
182 - mkinitrd: if using udev for the initrd, set things up appropriately
183 (based on patches from Harald Hoyer and Thomas Woerner)
184 - nash: support for echo -n
185 - nash: better error message on exec failures
186 - nash: exec udev if we're called as a hotplug handler
187
188 * Mon Aug 16 2004 Jeremy Katz <katzj@redhat.com> - 4.0.6-1
189 - various fixes from a code review by Steve Grubb which should fix
190 some of the lingering problems (#129673)
191 - nash: warning fix from Michal Jaegermann (#129673)
192 - grubby: removal with (hd0,0)
193
194 * Thu Aug 12 2004 Jeremy Katz <katzj@redhat.com> - 4.0.5-1
195 - nash: oops, let's try that again
196
197 * Wed Aug 11 2004 Jeremy Katz <katzj@redhat.com> - 4.0.4-1
198 - nash: fix mounting by label in some cases (tracked down by
199 Erik Jacobson, #129581, #129673, #129667, #129635)
200
201 * Tue Aug 10 2004 Jeremy Katz <katzj@redhat.com> 4.0.3-1
202 - grubby: more (hd0,0) support (#125156)
203 - mkinitrd.8: update manpage (#129585)
204 - nash: fix some warnings
205
206 * Wed Aug 4 2004 Jeremy Katz <katzj@redhat.com> 4.0.2-1
207 - nash: support bind mounting
208 - grubby: support the (hd0,0)/path syntax for kernels and initrds in
209 grub.conf (#114758, #125156, #120906)
210
211 * Wed Aug 4 2004 Jeremy Katz <katzj@redhat.com> - 4.0.1-1
212 - improve handling of arguments to init with initramfs (#129057)
213
214 * Mon Aug 2 2004 Jeremy Katz <katzj@redhat.com> - 4.0.0-1
215 - create an initramfs on 2.6 kernels instead of an initrd
216 - use new mount magic instead of pivot_root
217 on 2.6 kernels
218 - try to handle the case of modules going away on kernel upgrades a
219 little bit more nicely (#123994)
220 - avoid over-zealous creation of /dev/mapper/control (#127115)
221 - improve nash(8) manpage (#127413)
222
223 * Fri Jun 18 2004 Jeremy Katz <katzj@redhat.com> - 3.5.24-1
224 - fix usb-storage detection with 2.6 (#126309)
225
226 * Tue May 18 2004 Jeremy Katz <katzj@redhat.com> - 3.5.23-1
227 - add support for RAID6
228
229 * Wed May 12 2004 Jeremy Katz <katzj@redhat.com>
230 - add support for multipath personality from Tom Callaway (#120379)
231
232 * Thu May 6 2004 Jeremy Katz <katzj@redhat.com> - 3.5.22-1
233 - bump initrd size (#122325)
234
235 * Wed Apr 14 2004 Jeremy Katz <katzj@redhat.com> - 3.5.21-1
236 - new-kernel-package: add patch from Ryan Tilder to allow setting new
237 kernel as default (#117605)
238 - mkinitrd: i2o_pci isn't in 2.6 (#120827)
239 - new-kernel-pkg: conditionalize kernel binary name for 2.6 vs 2.4
240 on ppc/ppc64 (as it's vmlinuz in 2.6 instead of the
241 vmlinux from 2.4) (#120868)
242
243 * Tue Apr 13 2004 Jeremy Katz <katzj@redhat.com> - 3.5.20-1
244 - mkinitrd: minor regex fix for some kernel names (#120624)
245
246 * Mon Feb 9 2004 Jeremy Katz <katzj@redhat.com> - 3.5.19-1
247 - nash/mkinitrd: quiet mode for nash and necessary mkinitrd changes
248 to work with it
249 - mkinitrd: add lxo's patch for copying lvm.conf (#112099)
250 - new-kernel-pkg: allow specifying the banner used in the boot loader config
251 on the command line (#114809)
252
253 * Tue Jan 13 2004 Jeremy Katz <katzj@redhat.com>
254 - mkinitrd: add patch from Alex Kiernan for modules with multiple
255 deps in 2.6 (#113306)
256
257 * Thu Jan 8 2004 Jeremy Katz <katzj@redhat.com> 3.5.18-1
258 - new-kernel-pkg: add a --kernel-arguments option (#113125)
259
260 * Tue Jan 6 2004 Jeremy Katz <katzj@redhat.com>
261 - fix ybin path (#112939)
262
263 * Sun Jan 4 2004 Jeremy Katz <katzj@redhat.com> 3.5.17-1
264 - mkinitrd: handle multiple spaces in modules.conf (from Lubomir Bulej)
265 - nash: rebuild against new dietlibc fixing problems with root=LABEL= (#112623)
266 - mkinitrd: determine kernel version and adjust modulefile appropriately
267 so that we look at /etc/modprobe.conf for 2.6 kernels
268 - mkinitrd: first pass at getting lvm working on 2.4 -> 2.6 upgrade
269
270 * Wed Dec 24 2003 Jeremy Katz <katzj@redhat.com>
271 - mkinitrd: quiet strip by default
272
273 * Mon Dec 22 2003 Jeremy Katz <katzj@redhat.com> 3.5.16.1-1
274 - make stripping less aggressive
275
276 * Mon Dec 22 2003 Jeremy Katz <katzj@redhat.com> 3.5.16-1
277 - fixing handling of non-lvm case when /dev/mapper/control isn't present
278 - add patch from Al Viro to get root dev in numeric form by grokking sysfs
279
280 * Tue Dec 9 2003 Jeremy Katz <katzj@redhat.com>
281 - strip modules if /usr/bin/strip exists (#111756)
282
283 * Fri Dec 5 2003 Jeremy Katz <katzj@redhat.com> 3.5.15-2
284 - require lvm2 so that it gets installed early enough
285
286 * Fri Dec 5 2003 Jeremy Katz <katzj@redhat.com> 3.5.15-1
287 - mkinitrd: add support for lvm2 (note: will not currently handle being
288 on a running 2.4 kernel and installing 2.6 with lvm rootfs)
289
290 * Wed Dec 3 2003 Jeremy Katz <katzj@redhat.com>
291 - nash: add mkdmnod for creating the device-mapper control node
292
293 * Thu Oct 2 2003 Jeremy Katz <katzj@redhat.com> 3.5.14-1
294 - fix dependency on /usr/bin/tail and /usr/bin/id
295
296 * Tue Sep 30 2003 Florian La Roche <Florian.LaRoche@redhat.de>
297 - remove one more mktemp dir for "all loopback devices in use" case
298
299 * Tue Sep 23 2003 Jeremy Katz <katzj@redhat.com> 3.5.13-1
300 - fix getting modules from /lib/modules/$(uname -r)/updates
301
302 * Mon Sep 22 2003 Jeremy Katz <katzj@redhat.com> 3.5.12-1
303 - argument checking and usage for /sbin/installkernel (#103109)
304
305 * Wed Sep 3 2003 Jeremy Katz <katzj@redhat.com> 3.5.11-1
306 - really only do grub configs on grub arches
307 - some usb mkinitrd fixes
308
309 * Fri Aug 29 2003 Jeremy Katz <katzj@redhat.com> 3.5.10-1
310 - clean up bogus warning in installkernel
311 - only try to do grub configs on arches which support grub (#103261)
312
313 * Thu Aug 7 2003 Matt Wilson <msw@redhat.com> 3.5.9-1
314 - add \n to error messages in grubby
315 - NUL terminate buffer returned from readlink properly
316 - symlinks are most likely relative, chdir to / before trying to
317 follow them
318 - yaboot needs boot prefix
319 - silo needs boot prefix too
320
321 * Wed Jul 30 2003 Jeremy Katz <katzj@redhat.com>
322 - grubby: don't segfault on label=\n (reported by dburcaw)
323
324 * Thu Jul 24 2003 Jeremy Katz <katzj@redhat.com>
325 - grubby: patch from zaitcev for uninitialized variable that can get
326 hit in the zipl case
327
328 * Mon Jul 21 2003 Jeremy Katz <katzj@redhat.com> 3.5.8-1
329 - bump initrd size (#99525)
330
331 * Wed Jul 9 2003 Jeremy Katz <katzj@redhat.com> 3.5.7-1
332 - pick modules from /lib/modules/$(uname -r)/updates first
333 - be less confused by more than one module of a name
334
335 * Wed Jun 25 2003 Jeremy Katz <katzj@redhat.com> 3.5.6-1
336 - unbreak reading module options from modules.conf again (#97982)
337
338 * Fri Jun 20 2003 Bill Nottingham <notting@redhat.com> 3.5.5-1
339 - fix modules.dep usage for 2.5/2.6
340
341 * Fri Jun 20 2003 Jeremy Katz <katzj@redhat.com> 3.5.4-1
342 - handle more bizarre modules.conf constructs (notting)
343
344 * Thu Jun 12 2003 Jeremy Katz <katzj@redhat.com> 3.5.3-1
345 - mkinitrd: fix copying of pvs (#97314, #97289)
346 - mkinitrd: use pvscan instead of lvmdiskscan to find PVs to work
347 better on other arches
348 - mkinitrd: better check for dasd existence
349 - mkinitrd: make certain lvm-mod is included if root on lvm
350
351 * Wed Jun 11 2003 Jeremy Katz <katzj@redhat.com> 3.5.2-1
352 - mkinitrd: revert use of modprobe -c. it breaks in the installer when we
353 don't have a modules.dep for the BOOT kernel
354 - nash: return pivot_root call correctly (#97753)
355
356 * Wed Jun 11 2003 Jeremy Katz <katzj@redhat.com> 3.5.1-1
357 - nash: fix syscall bits with gcc 3.3 on s390
358 - new-kernel-pkg: do depmod before mkinitrd (#97218)
359
360 * Tue Jun 10 2003 Jeremy Katz <katzj@redhat.com> 3.5.0-1
361 - mkinitrd: add patch from gc@mandrakesoft.com to determine module
362 deps from modules.dep (#87873)
363 - tweak patch to not break weird cases where module deps aren't all
364 you need :/
365 - grubby: don't remove the last kernel (#60041)
366 - mkinitrd: use modprobe -c to find module options (#89794)
367
368 * Tue May 20 2003 Matt Wilson <msw@redhat.com> 3.4.52-1
369 - use addSystemMap to build the image for iSeries (#91187)
370
371 * Fri May 16 2003 Jeremy Katz <katzj@redhat.com> 3.4.51-1
372 - grubby: error out gracefully if we run out of space (#85424)
373 - mkinitrd: copy parent dirs for pvs (#88962)
374 - mkinitrd: exit with an exit status if tar fails (#90123)
375 - new-kernel-pkg: only use the first entry for / (#90155)
376 - grubby: fix a buffer overflow (#90444)
377
378 * Wed Apr 30 2003 Jeremy Katz <katzj@redhat.com> 3.4.50-1
379 - fix typo in new-kernel-pkg for iSeries
380
381 * Wed Apr 30 2003 Elliot Lee <sopwith@redhat.com>
382 - BuildRequires: popt
383 - Change grubby Makefile to static-link popt a bit more cleanly
384
385 * Thu Apr 24 2003 Jeremy Katz <katzj@redhat.com> 3.4.49.1-1
386 - use Arjan's suggestion of vmlinitrd for the kernel + initrd combo file
387
388 * Thu Apr 24 2003 Jeremy Katz <katzj@redhat.com> 3.4.49-2
389 - fix description referencing /etc/conf.modules (#89558)
390
391 * Thu Apr 24 2003 Jeremy Katz <katzj@redhat.com> 3.4.49-2
392 - require ppc64-utils on ppc
393
394 * Fri Apr 18 2003 Jeremy Katz <katzj@redhat.com> 3.4.49-1
395 - new-kernel-pkg: on iSeries, we don't have a boot loader, just make the
396 kernel + initrd combo file (/boot/vmlinux-version.img)
397
398 * Mon Apr 07 2003 Karsten Hopp <karsten@redhat.com> 3.4.48-1
399 - Fix segfault on mainframe
400
401 * Wed Mar 26 2003 Jeremy Katz <katzj@redhat.com> 3.4.47-1
402 - mkinitrd: fix using options for loading modules
403 - mkinitrd: don't use kernel parameters for dasd at mkinitrd time,
404 use what's in modules.conf
405
406 * Mon Mar 24 2003 Jeremy Katz <katzj@redhat.com> 3.4.46-1
407 - new-kernel-pkg: add necessary bits for s390, some logic cleanups
408 - grubby: fix root detection for s390{,x}
409
410 * Sun Mar 23 2003 Jeremy Katz <katzj@redhat.com> 3.4.45-1
411 - grubby: add silo support (sparc)
412 - grubby: add zipl support (s390{,x})
413 - add grubby test cases for zipl support
414
415 * Wed Mar 19 2003 Jeremy Katz <katzj@redhat.com> 3.4.44.1-1
416 - fix dasd option reading
417
418 * Fri Mar 14 2003 Phil Knirsch <pknirsch@redhat.com> 3.4.44
419 - Added automatic dasd= parameters for kernel parameter on s390(x).
420
421 * Tue Mar 4 2003 Jeremy Katz <katzj@redhat.com> 3.4.43-1
422 - apply ppc patches for new-kernel-pkg and installkernel from Dan
423 Burcaw <dburcaw@terrasoftsolutions.com>
424 - man page tweak (#85471)
425
426 * Tue Feb 18 2003 Jeremy Katz <katzj@redhat.com> 3.4.42-1
427 - grubby: fix segfault from uninitialized variable (#84128)
428
429 * Tue Feb 11 2003 Jeremy Katz <katzj@redhat.com> 3.4.41-1
430 - nash: add readlink
431 - use readlink for rootdev to handle symlinks to root devs (#83391)
432
433 * Tue Feb 4 2003 Jeremy Katz <katzj@redhat.com> 3.4.40-1
434 - fix i2o module ordering (#83447)
435 - ifarch'd build requires of dietlibc now that the build system has a way to
436 handle these
437
438 * Sat Feb 01 2003 Florian La Roche <Florian.LaRoche@redhat.de>
439 - change one test from a number to a string test that could otherwise
440 fail in not properly setup chroot environments
441
442 * Fri Jan 31 2003 <ewt@redhat.com>
443 - added support for yaboot
444 - test script runs tests for all platforms
445 - separated elilo configuration from lilo mode, allowing elilo specific
446 tests to be run on any platform
447
448 * Sun Jan 26 2003 <ewt@redhat.com>
449 - grubby now shortens lilo titles to ensure they are less then 16 characters
450 long (76236)
451 - mkinitrd would only turn on /dev/md0 if raid was needed; now it enables
452 all raid devices listed in /proc/mdstat (82209)
453 - use product name from /etc/redhat-release to generate label in grub.conf
454 (82352)
455
456 * Mon Jan 20 2003 Bill Nottingham <notting@redhat.com> 3.4.36-1
457 - don't error out running awk on /proc/mdstat if /proc/mdstat isn't
458 there
459
460 * Tue Jan 14 2003 <ewt@redhat.com>
461 - all mkdev() actions will create directories as needed (some code in
462 mkdevices is now obsolete; I'll remove it later) (#73317)
463 - added mkdev command to test the above
464 - support diratime/nodiratime mount options (#78738)
465 - grubby will follow symlinks when writing new config file (#78713)
466 - don't depend on raidtab, use /proc/mdstat instead (#80424) this covers
467 both mkinitrd and grubby
468
469 * Sun Jan 5 2003 Jeremy Katz <katzj@redhat.com> 3.4.34-1
470 - grubby: fix segfault finding default if default doesn't have a root= (#66000)
471 - don't include usb modules by default. pass --with-usb to get usb modules
472 - make sure kudzu exists before trying to exec it
473 - handle multiple scsi hosts being present (#77422)
474 - add /usr/sbin to default path (#79581)
475 - fix using --builtin= (#80448)
476 - grubby: preserve the mode on config files (#80776)
477
478 * Mon Dec 16 2002 Jeremy Katz <katzj@redhat.com>
479 - errno fixes
480
481 * Tue Dec 03 2002 Florian La Roche <Florian.LaRoche@redhat.de>
482 - /sbin/new-kernel-pkg: fix a test to have correct ""
483
484 * Fri Nov 22 2002 Jeremy Katz <katzj@redhat.com>
485 - mkinitrd: more gzipped module fixes
486
487 * Thu Nov 21 2002 Jeremy Katz <katzj@redhat.com>
488 - mkinitrd: add support for finding gzipped modules
489 - mkinitrd: don't be noisy if we don't have lvm-mod loaded
490
491 * Wed Nov 6 2002 Jeremy Katz <katzj@redhat.com>
492 - grubby: don't bail when looking for root in appends of lilo-style configs
493 - include grubby on x86_64
494
495 * Thu Sep 26 2002 Nalin Dahyabhai <nalin@redhat.com>
496 - fix some syntax errors
497 - use grep's -q flag to save a redirect in places where we're not redirecting
498 stderr
499
500 * Thu Sep 5 2002 Jeremy Katz <katzj@redhat.com>
501 - grubby could segfault by going into its lilo checking if it couldn't find
502 a default to copy (default had no root= and --bad-image-okay wasn't
503 being used)
504
505 * Mon Sep 2 2002 Jeremy Katz <katzj@redhat.com>
506 - nash: create directories if needed in mkdevices command (#73090)
507 - grubby: handle lilo case of non-linux default (#72202)
508
509 * Sat Aug 31 2002 Jeremy Katz <katzj@redhat.com>
510 - grubby: fix for case like 'append = " hdc=ide-scsi "' (#68802)
511
512 * Fri Aug 30 2002 Bill Nottingham <notting@redhat.com>
513 - fix firewire stuff (#72916)
514
515 * Fri Aug 23 2002 Bill Nottingham <notting@redhat.com>
516 - fix mpt fusion stuff
517
518 * Tue Aug 13 2002 Jeremy Katz <katzj@redhat.com>
519 - /boot/efi/redhat -> /boot/efi/EFI/redhat on ia64
520
521 * Sun Aug 11 2002 Jeremy Katz <katzj@redhat.com>
522 - fix grubby to work correctly on ia64
523
524 * Thu Aug 08 2002 Michael Fulbright <msf@redhat.com>
525 - added sleep command to nash and fixed creating initrd with / or /boot on usb
526
527 * Tue Jul 30 2002 Jeremy Katz <katzj@redhat.com>
528 - grubby: adding kernels to lilo.conf when not using root=LABEL will work
529 now too
530
531 * Fri Jul 26 2002 Erik Troan <ewt@redhat.com>
532 - didn't close /proc/partitions in mkdevices
533
534 * Thu Jul 25 2002 Jeremy Katz <katzj@redhat.com>
535 - grubby: fix adding kernels to lilo when using root=LABEL
536
537 * Wed Jul 24 2002 Erik Troan <ewt@redhat.com>
538 - added and used mkdevices command (68959)
539
540 * Wed Jul 17 2002 Erik Troan <ewt@redhat.com>
541 - do proper probing to check root=LABEL
542 - --bootloader-probe didn't support /etc/sysconfig/grub
543
544 * Fri Jul 12 2002 Erik Troan <ewt@redhat.com>
545 - don't sanity check root=LABEL right now; probing might make sense?
546
547 * Wed Jul 10 2002 Erik Troan <ewt@redhat.com>
548 - --ifneeded is obsolete; we always need initrds
549 - grubby lets you specify multiple indexes for --info
550 - grubby lets you select kernels by title
551 - added showlabels to nash
552 - new-kernel-pkg sets the root device from /etc/fstab rather then inheriting it
553 - new-kernel-pkg removes all entries w/ a duplicate label (67459)
554
555 * Mon Jul 08 2002 Erik Troan <ewt@redhat.com>
556 - usb root device code could fail, causing no initrd to be made
557
558 * Thu Jun 27 2002 Erik Troan <ewt@redhat.com>
559 - grubby didn't add new kernels properly
560
561 * Thu Jun 27 2002 Erik Troan <ewt@redhat.com>
562 - support root on usb devices
563
564 * Wed Jun 26 2002 Erik Troan <ewt@redhat.com>
565 - other= in lilo.conf wasn't being parsed out properly
566
567 * Mon Jun 24 2002 Erik Troan <ewt@redhat.com>
568 - changed --add-kernel implementation so that --args gets handled properly
569
570 * Sun Jun 23 2002 Erik Troan <ewt@redhat.com>
571 - added loadinitrd (used by mkbootdisk) on ia32 and sparc
572 - modules "off" and "null" should be ignored (67086)
573 - mkrootdev looks for root=LABEL=/ in /proc/cmdline, so root by label
574 works again (fully determined by root= kernel parameter)
575 - added --update-kernel and --remove-args arguments to grubby
576 - kernel specification of ALL supported by grubby
577 - DEFAULT accepted much more consistently
578 - grubby --info displays info on all kernels specified, not just the first
579 - ext3 need mbcache now (67354)
580 - grubby allows config file entry numbers to be used as kernel paths
581 - support /etc/sysconfig/grub.conf
582 - display lba info from lilo.conf file in --info
583
584 * Thu Jun 13 2002 Jeremy Katz <katzj@redhat.com>
585 - don't run lilo twice on kernel removal in new-kernel-pkg
586 - don't run grubby to add/remove kernels from new-kernel-pkg if
587 bootloader config doesn't
588
589 * Tue Jun 11 2002 Erik Troan <ewt@redhat.com>
590 - added --bootloader-probe to grubby
591 - wrote a man page for grubby
592 - include grubby on ia64
593 - updated new-kernel-pkg to work with lilo/elilo
594 - added --info=DEFAULT option
595
596 * Mon Jun 10 2002 Jeremy Katz <katzj@redhat.com>
597 - start raid before lvm so that you can have root on lvm on raid (#66175)
598
599 * Tue Jun 04 2002 Erik Troan <ewt@redhat.com>
600 - failed to initialize a variable in grubby
601
602 * Fri May 31 2002 Erik Troan <ewt@redhat.com>
603 - added --grub option so grub tests could run on ia64
604 - added some basic tests of lilo default directive handling
605
606 * Wed May 29 2002 Jeremy Katz <katzj@redhat.com>
607 - require lvm
608
609 * Tue May 28 2002 Bill Nottingham <notting@redhat.com>
610 - fix umounting of /initrd when pivoting
611
612 * Tue May 28 2002 Erik Troan <ewt@redhat.com>
613 - marked /sbin/installkernel as %config (53006)
614 - run make test during build
615
616 * Wed May 22 2002 Erik Troan <ewt@redhat.com>
617 - added --nopivot (53679)
618 - honor INSTALL_PATH in installkernel (32833)
619 - installkernel versions old kernels as well (52756)
620 - lilo support added to grubby
621
622 * Tue May 21 2002 Erik Troan <ewt@redhat.com>
623 - cleaned up usage message
624 - added --omit-lvm-modules to man page
625 - added --builtin option (65250)
626 - skip comments in fstab (65249)
627 - added findlodev to nash, use that to pick block device (63421)
628 - support -o option in nash's mount (59185)
629 - look for xfs_dmapi (60066)
630 - added > support for executed commands (61180)
631 - grubby copies permissions from old config file (59227)
632 - use options from fstab for root filesystem (56071)
633 - try and be better about returning nonzero on error (60203)
634 - make modprobe symlink properly to avoid kernel message (62145)
635 - support linear raid (12775)
636 - support fallback option in grub config (54794)
637 - comments in template entries not handled quite right (65198)
638
639 * Sat Apr 20 2002 Erik Troan <ewt@redhat.com>
640 - grubby does a better job of not adding superfluous default= lines
641
642 * Wed Apr 17 2002 Erik Troan <ewt@redhat.com>
643 - preload works again
644
645 * Wed Apr 10 2002 Jeremy Katz <katzj@redhat.com>
646 - revert to not mounting by label
647
648 * Fri Apr 5 2002 Jeremy Katz <katzj@redhat.com>
649 - include pbrown's changes to load parport_pc when needing ppa.o (#35360)
650
651 * Thu Apr 4 2002 Jeremy Katz <katzj@redhat.com>
652 - fix redirection bug (#62623)
653 - create proper link of /sbin->/bin in initrd (#62199)
654
655 * Thu Mar 28 2002 Jeremy Katz <katzj@redhat.com>
656 - prereq dev package so that we always have the dev package before we get run
657
658 * Fri Mar 22 2002 Jeremy Katz <katzj@redhat.com>
659 - duh, that won't work. fix it
660 - don't require lvm tools right now
661
662 * Thu Mar 21 2002 Jeremy Katz <katzj@redhat.com>
663 - fix nash to create directories for devices like cciss and ida
664
665 * Tue Feb 5 2002 Bill Nottingham <notting@redhat.com>
666 - run mkinitrd with -f in new-kernel-pkg
667 - don't run lilo in /sbin/installkernel
668
669 * Fri Feb 1 2002 Jeremy Katz <katzj@redhat.com>
670 - require lvm
671
672 * Thu Jan 31 2002 Jeremy Katz <katzj@redhat.com>
673 - clean up warnings for when /proc isn't mounted
674
675 * Tue Jan 29 2002 Jeremy Katz <katzj@redhat.com>
676 - fix probing for LVM usage to require a volume group to exist before adding
677 the module
678 - --omit-lvm-modules will omit LVM modules
679 - add support for root device being LVM
680
681 * Wed Jan 16 2002 Erik Troan <ewt@redhat.com>
682 - look for a non /tmpfs directory
683 - added support for xfs
684 - use with raid md.o if it exists
685 - fixed bug in echo
686 - use find form nash rather then /usr (mkinitrd shouldn't need /usr
687 mounted)
688
689 * Fri Jan 11 2002 Erik Troan <ewt@redhat.com>
690 - added support for mounting root filesystem by label
691 - switched to dietlibc from minilibc
692 - fix so --preload= works [33675,57560,44377]
693 - added info on --image-version and --nocompress to man page [57560]
694 - set fileystem check interval to 0 in case the system clock
695 is borked [51454]
696 - give a proper error when run by a user other then root [27218,53159]
697 - grubby statically linked against popt [55305]
698 - cleaned up verbose output a bit [21791]
699
700 * Tue Dec 18 2001 Trond Eivind Glomsrød <teg@redhat.com>
701 - Add LVM module when LVM is used
702
703 * Wed Sep 5 2001 Jeremy Katz <katzj@redhat.com>
704 - grubby shouldn't blow away default=saved lines (#52981)
705
706 * Fri Aug 31 2001 Jeremy Katz <katzj@redhat.com>
707 - fix new-kernel-pkg --mkinitrd for ia64
708
709 * Thu Aug 30 2001 Erik Troan <ewt@redhat.com>
710 - fixed bug handling invalid default (MF #52889)
711 - in some cases we would set the default to point at a removed image
712
713 * Wed Aug 29 2001 Erik Troan <ewt@redhat.com>
714 - minor grubby fixes
715
716 * Tue Aug 28 2001 Jeremy Katz <katzj@redhat.com>
717 - let new-kernel-pkg be able to do more (initrds, modules.*)
718 - include grubby only on x86
719
720 * Mon Aug 27 2001 Jeremy Katz <katzj@redhat.com>
721 - more grubby fixups for having a /boot
722 - added new-kernel-pkg
723
724 * Sun Aug 26 2001 Erik Troan <ewt@redhat.com>
725 - added grubby
726 - added installkernel
727
728 * Fri Aug 3 2001 Matt Wilson <msw@redhat.com>
729 - make consoles with the correct minor numbers
730 - applied patch from hjl to fix fstab parsing (#50819)
731
732 * Fri Jul 20 2001 Jeremy Katz <katzj@redhat.com>
733 - skip errors finding jbd as a module if we're skipping them trying to find
734 ext3 so that you can build a kernel with ext3 built-in and still use an
735 initrd
736
737 * Wed Jul 11 2001 Bill Nottingham <notting@redhat.com>
738 - don't print errors if /etc/raidtab doesn't exist
739 - or /etc/{modules.conf,conf.modules}, for that matter
740
741 * Fri Jul 6 2001 Matt Wilson <msw@redhat.com>
742 - don't dig through /etc/fstab to find out if we have a filesystem on
743 a RAID device, it's usually mounted by label so /dev/mdN isn't there
744 at all (#46525)
745
746 * Tue Jun 26 2001 Bill Nottingham <notting@redhat.com>
747 - require filesystem >= 2.1.0, otherwise we don't boot
748
749 * Thu Jun 21 2001 Erik Troan <ewt@redhat.com>
750 - added a bunch of commands to nash
751 - use pivot_root
752 - support ext3
753
754 * Fri Jun 08 2001 Florian La Roche <Florian.LaRoche@redhat.de>
755 - delete the exclusivearch line completely
756
757 * Fri Mar 23 2001 Matt Wilson <msw@redhat.com>
758 - reset the state of findmodule after getting the modules we need
759
760 * Wed Feb 28 2001 Matt Wilson <msw@redhat.com>
761 - changed the Requires on mktemp from >= 1.5 to >= 1.5-5 (which included
762 -d support) (#30127)
763
764 * Fri Feb 23 2001 Erik Troan <ewt@redhat.com>
765 - let nash be invoked as modprobe to avoid a modprobe failure to exec
766 - nash will try to run arbitrary commands now (removing insmod as a special
767 case)
768
769 * Mon Feb 12 2001 Matt Wilson <msw@redhat.com>
770 - add findutils to Requires line (#27269)
771
772 * Thu Feb 8 2001 Matt Wilson <msw@redhat.com>
773 - added checks to load the modules i2o_block needs
774
775 * Wed Feb 7 2001 Bill Nottingham <notting@redhat.com>
776 - fix utterly broken build
777
778 * Wed Jan 31 2001 Helge Deller <hdeller@redhat.com>
779 - added mandir to nash Makefile (RH 6.x compatibility)
780
781 * Tue Jan 30 2001 Erik Troan <ewt@redhat.com>
782 - added dependency on mktemp
783
784 * Thu Jan 25 2001 Erik Troan <ewt@redhat.com>
785 - we need to insert xor.o before raid5.o
786
787 * Wed Jan 24 2001 Matt Wilson <msw@redhat.com>
788 - code in RAID_AUTORUN ioctl fallback
789 - fixed raidstart check flag from -z to -n
790
791 * Tue Jan 23 2001 Erik Troan <ewt@redhat.com>
792 - switched to using nash from sash
793
794 * Tue Jan 23 2001 Matt Wilson <msw@redhat.com>
795 - added patch from twaugh to avoid blindly adding scsi_mod
796 and sd_mod to initrd if they are not needed (#24114)
797
798 * Thu Jan 11 2001 Bernhard Rosenkraenzer <bero@redhat.com>
799 - Enlarge initrds, needed for systems with both IDE and SCSI
800 (Bug #23846)
801 - Version 2.[6789] probably shouldn't identify itself as 2.6
802 with --version. ;)
803 - bzip2 source
804
805 * Wed Dec 20 2000 Erik Troan <ewt@redhat.com>
806 - let the kernel autoload ide-cd
807
808 * Fri Dec 08 2000 Erik Troan <ewt@redhat.com>
809 - added modular ide support
810
811 * Wed Aug 30 2000 Nalin Dahyabhai <nalin@redhat.com>
812 - use mktemp to create temporary files and directories
813
814 * Sat Aug 05 2000 Erik Troan <ewt@redhat.com>
815 - changes from Keith Owens for 2.4
816
817 * Tue Jul 4 2000 Matt Wilson <msw@redhat.com>
818 - build on alpha
819
820 * Mon Jun 26 2000 Bill Nottingham <notting@redhat.com>
821 - ignore 'unknown' aliases (they shouldn't be there anyways)
822
823 * Thu Jun 1 2000 Bill Nottingham <notting@redhat.com>
824 - build on ia64
825 - bump up initrd size on ia64
826 - modules.confiscation, /usr/man -> /usr/share/man
827
828 * Tue May 2 2000 Nalin Dahyabhai <nalin@redhat.com>
829 - make RPM pick up man page, regardless of compression
830
831 * Tue Feb 29 2000 Matt Wilson <msw@redhat.com>
832 - add requirement for /sbin/losetup
833
834 * Mon Feb 7 2000 Matt Wilson <msw@redhat.com>
835 - gzip manpage
836
837 * Thu Feb 3 2000 Matt Wilson <msw@redhat.com>
838 - gzip manpage
839
840 * Mon Jan 10 2000 Erik Troan <ewt@redhat.com>
841 - use sash, not ash
842
843 * Mon Jan 3 2000 Matt Wilson <msw@redhat.com>
844 - use ash.static for /bin/sh, not sash
845
846 * Sat Jan 1 2000 Erik Troan <ewt@redhat.com>
847 - configure loopback devices
848
849 * Tue Sep 28 1999 Bill Nottingham <notting@redhat.com>
850 - sparc fixup from jakub
851
852 * Wed Sep 22 1999 Michael K. Johnson <johnsonm@redhat.com>
853 - fix cleanup (blush!)
854
855 * Tue Sep 21 1999 Michael K. Johnson <johnsonm@redhat.com>
856 - now works when /usr is not mounted (do not rely on /usr/bin/install)
857 - slight cleanups, better usage message
858
859 * Thu Jul 29 1999 Michael K. Johnson <johnsonm@redhat.com>
860 - Now automatically includes necessary raid modules
861 - --omit-raid-modules now omits raid modules
862 - tiny doc updates
863
864 * Thu Jul 29 1999 Bill Nottingham <notting@redhat.com>
865 - updates from bugzila (#4243, #4244)
866
867 * Sat Mar 27 1999 Matt Wilson <msw@redhat.com>
868 - --omit-scsi-modules now omits all scsi modules
869 - updated documentation
870 - mkinitrd now grabs scsi_hostadapter modules from anywhere -
871 some RAID controller modules live in block/
872
873 * Thu Feb 25 1999 Matt Wilson <msw@redhat.com>
874 - updated description
875
876 * Mon Jan 11 1999 Matt Wilson <msw@redhat.com>
877 - Ignore the absence of scsi modules, include them if they are there, but
878 don't complain if they are not.
879 - changed --no-scsi-modules to --omit-scsi-modules (as it should have been)
880
881 * Thu Nov 5 1998 Jeff Johnson <jbj@redhat.com>
882 - import from ultrapenguin 1.1.
883
884 * Tue Oct 20 1998 Jakub Jelinek <jj@ultra.linux.cz>
885 - fix for combined sparc/sparc64 insmod, also pluto module is really
886 fc4:soc:pluto and we don't look at deps, so special case it.
887
888 * Sat Aug 29 1998 Erik Troan <ewt@redhat.com>
889 - replaced --needs-scsi-mods (which is now the default) with
890 --omit-scsi-mods
891
892 * Fri Aug 7 1998 Jeff Johnson <jbj@redhat.com>
893 - correct obscure regex/shell interaction (hardwires tabs on line 232)
894
895 * Mon Jan 12 1998 Erik Troan <ewt@redhat.com>
896 - added 'make archive' rule to Makefile
897 - rewrote install procedure for more robust version handling
898 - be smarter about grabbing options from /etc/conf.modules
899
900 * Mon Oct 20 1997 Erik Troan <ewt@redhat.com>
901 - made it use /bin/ash.static
902
903 * Wed Apr 16 1997 Erik Troan <ewt@redhat.com>
904 - Only use '-s' to install binaries if /usr/bin/strip is present.
905 - Use an image size of 2500 if binaries can't be stripped (1500 otherwise)
906 - Don't use "mount -o loop" anymore -- losetup the proper devices manually
907 - Requires losetup, e2fsprogs
908
909 * Wed Mar 12 1997 Michael K. Johnson <johnsonm@redhat.com>
910 - Fixed a bug in parsing options.
911 - Changed to use a build tree, then copy the finished tree into the
912 image after it is built.
913 - Added patches derived from ones written by Christian Hechelmann which
914 add an option to put the kernel version number at the end of the module
915 name and use install -s to strip binaries on the fly.

admin@koozali.org
ViewVC Help
Powered by ViewVC 1.2.1 RSS 2.0 feed