/[smeserver]/rpms/mkinitrd/sme7/mkinitrd.spec
ViewVC logotype

Contents of /rpms/mkinitrd/sme7/mkinitrd.spec

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph


Revision 1.2 - (show annotations) (download)
Sat Dec 1 02:32:17 2007 UTC (16 years, 11 months ago) by slords
Branch: MAIN
CVS Tags: mkinitrd-4_2_1_13-1_1_el4_sme
Changes since 1.1: +19 -3 lines
Import on branch sme7 of package mkinitrd-4.2.1.13-1.1.el4.sme.src.rpm

1 Summary: Creates an initial ramdisk image for preloading modules.
2 Name: mkinitrd
3 Version: 4.2.1.13
4 Release: 1.1%{?dist}
5 License: GPL
6 Group: System Environment/Base
7 Source: mkinitrd-%{version}.tar.bz2
8 Patch1: mkinitrd-4.2.1.13-mdassemble.patch
9 ExclusiveOs: Linux
10 Prereq: dev
11 Requires: e2fsprogs, /bin/sh, fileutils, grep, mount, gzip, tar, /sbin/insmod.static, /sbin/losetup, mktemp >= 1.5-5, findutils, lvm2, kudzu, /usr/bin/which
12 Requires: filesystem >= 2.1.0, cpio
13 Requires: /sbin/mdassemble
14 Conflicts: udev < 0:032
15 BuildRequires: popt
16 BuildRequires: glibc-headers
17 %ifarch i386
18 BuildRequires: dietlibc
19 %endif
20 %ifarch ppc
21 Requires: ppc64-utils >= 0.3-1
22 %endif
23 BuildRoot: %{_tmppath}/%{name}-root
24
25 %description
26 Mkinitrd creates filesystem images for use as initial ramdisk (initrd)
27 images. These ramdisk images are often used to preload the block
28 device modules (SCSI or RAID) needed to access the root filesystem.
29
30 In other words, generic kernels can be built without drivers for any
31 SCSI adapters which load the SCSI driver as a module. Since the
32 kernel needs to read those modules, but in this case it isn't able to
33 address the SCSI adapter, an initial ramdisk is used. The initial
34 ramdisk is loaded by the operating system loader (normally LILO) and
35 is available to the kernel as soon as the ramdisk is loaded. The
36 ramdisk image loads the proper SCSI adapter and allows the kernel to
37 mount the root filesystem. The mkinitrd program creates such a
38 ramdisk using information found in the /etc/modules.conf file.
39
40 %prep
41 %setup -q
42 %patch1 -p1
43
44 %build
45 make
46 make test
47 if [ $? != 0 ]; then exit 1; fi
48
49 %install
50 rm -rf $RPM_BUILD_ROOT
51 make BUILDROOT=$RPM_BUILD_ROOT mandir=%{_mandir} install
52
53 %clean
54 rm -rf $RPM_BUILD_ROOT
55
56 %files
57 %defattr(-,root,root)
58 %attr(755,root,root) /sbin/mkinitrd
59 %attr(644,root,root) %{_mandir}/man8/mkinitrd.8*
60 %attr(755,root,root) /sbin/nash
61 %attr(644,root,root) %{_mandir}/man8/nash.8*
62 %config %attr(755,root,root) /sbin/installkernel
63 %attr(755,root,root) /sbin/new-kernel-pkg
64 %attr(755,root,root) /sbin/grubby
65 %attr(644,root,root) %{_mandir}/man8/grubby.8*
66
67 %changelog
68 * Fri Nov 30 2007 Shad L. Lords <slords@mail.com> 4.2.1.13-1.1.sme
69 - Clean up spec so package can be built by koji/plague
70 - Use generated config file instead of just scanning [SME: 2192]
71 - Use mdassemble rather than raidautorun in initrd, so that we control
72 UUID to device mapping. [SME: 961, 1895]
73
74 * Tue Aug 8 2007 Peter Jones <pjones@redhat.com> - 4.2.1.13-1
75 - Fix linking error
76 Related: #214841
77
78 * Tue Aug 7 2007 Peter Jones <pjones@redhat.com> - 4.2.1.12-1
79 - Fix "make test" regression
80 Related: #214841
81
82 * Tue Aug 7 2007 Peter Jones <pjones@redhat.com> - 4.2.1.11-1
83 - Use dynamic buffer for input file.
84 Resolves: #214841
85 - Fix spelling errors in grubby.8
86 Resolves: #230605
87 - Fix "--without-usb" and "--with-usb" handling.
88 Resolves: #246069
89
90 * Wed Feb 7 2007 Peter Jones <pjones@redhat.com> - 4.2.1.10-1.1
91 - Fix 'requires' for usb changes.
92 Related: #202070
93
94 * Fri Jan 31 2007 Peter Jones <pjones@redhat.com> - 4.2.1.10-1
95 - Allow use of usb devices as the root filesystem
96 Resolves: #202070
97
98 * Thu Jan 30 2007 Peter Jones <pjones@redhat.com> - 4.2.1.9-1
99 - Fix handling of modprobe options when they span multiple lines
100 Resolves: #184544
101
102 * Mon Apr 10 2006 Peter Jones <pjones@redhat.com> - 4.2.1.8-1
103 - Fix mangling of mount when using device mapper (#171872)
104 - Fix lvm striping (#174678, patch from Bastien Nocera)
105
106 * Wed Aug 31 2005 Peter Jones <pjones@redhat.com> - 4.2.1.6-1
107 - Handle short reads correctly when dealing with files in /proc (#137816)
108
109 * Mon Aug 29 2005 Peter Jones <pjones@redhat.com> - 4.2.1.5-1
110 - More fixes for duplicate arguments (#147222)
111
112 * Mon Apr 4 2005 Peter Jones <pjones@redhat.com> - 4.2.1.5-1
113 - Don't consolidate duplicates in "--args" (#147222)
114
115 * Fri Apr 1 2005 Peter Jones <pjones@redhat.com> - 4.2.1.4-1
116 - close /init just after reading the file, instead of after runStartup()
117 finishes, so it gets closed before we exec() /sbin/init . (#145601)
118
119 * Thu Mar 17 2005 Peter Jones <pjones@redhat.com> - 4.2.1.3-1
120 - Don't do vgmknodes (more of #151172)
121
122 * Tue Mar 15 2005 Peter Jones <pjones@redhat.com> - 4.2.1.2-1
123 - Fix clustered volume group locking in the initrd during vgscan/vgchange,
124 and only activate the volume group / lives on (#151172)
125
126 * Mon Mar 14 2005 Peter Jones <pjones@redhat.com> - 4.2.1.1-1
127 - Make getArg return NULL on cmd=NULL, fixing #144472 . Based on a
128 patch from Kasper Dupont.
129 - Make nash expand environment variables on command lines (#144474)
130 - Make nash check pids returned from wait*() (#145660)
131
132 * Wed Nov 3 2004 Jeremy Katz <katzj@redhat.com>
133 - handle machines with lots of disks in /proc/partitions (#137816)
134
135 * Sun Oct 24 2004 Jeremy Katz <katzj@redhat.com>
136 - require cpio (#136814)
137
138 * Sun Oct 17 2004 Jeremy Katz <katzj@redhat.com> - 4.1.18-1
139 - fix UPDATEDEFAULT with new-kernel-pkg (#135997)
140
141 * Fri Oct 15 2004 Jeremy Katz <katzj@redhat.com> - 4.1.17-1
142 - run udevstart again instead of sleeping, this will ensure all
143 devices are created in all cases after modules have been
144 loaded (thanks to notting)
145
146 * Fri Oct 15 2004 Jeremy Katz <katzj@redhat.com> - 4.1.16-1
147 - mkinitrd: Sleep briefly to let udev finish creating devices
148
149 * Wed Oct 13 2004 Jeremy Katz <katzj@redhat.com> - 4.1.15-1
150 - new-kernel-pkg: set new kernels as default (#135161) when
151 a) /etc/sysconfig/kernel contains UPDATEDEFAULT=yes
152 b) --package foo is passed in and foo matches DEFAULTKERNEL
153 in /etc/sysconfig/kernel
154
155 * Thu Sep 30 2004 Jeremy Katz <katzj@redhat.com> - 4.1.14-1
156 - support changing root on the kernel command line with lvm (#133236)
157
158 * Wed Sep 22 2004 Jeremy Katz <katzj@redhat.com> - 4.1.12-1
159 - update to work with udev 032, conflict with old udev
160 - if udev is present, use it. trying to avoid the use of udev if it's
161 installed is the road to things not working
162
163 * Fri Sep 10 2004 Jeremy Katz <katzj@redhat.com> - 4.1.11-1
164 - more fixing
165
166 * Wed Sep 8 2004 Jeremy Katz <katzj@redhat.com> - 4.1.10-1
167 - mkinitrd: mount tmpfs with the right permissions
168
169 * Tue Aug 31 2004 Jeremy Katz <katzj@redhat.com> - 4.1.9-1
170 - mkinitrd: use tmpfs instead of ramfs for udev stuff
171
172 * Fri Aug 27 2004 Jeremy Katz <katzj@redhat.com> - 4.1.8-1
173 - nash: and the hack to fix ppc broke other arches, conditionalize it (#130928)
174
175 * Wed Aug 25 2004 Jeremy Katz <katzj@redhat.com> - 4.1.6-1
176 - nash: fix another off by one (#130987)
177 - nash: hack to fix ppc booting (#130928)
178
179 * Tue Aug 25 2004 Karsten Hopp <karsten@redhat.com> - 4.1.5-1
180 - fix zfcp handling
181
182 * Tue Aug 24 2004 Jeremy Katz <katzj@redhat.com> - 4.1.4-1
183 - nash: create raid device if needed (think udev) before calling
184 the raidautorun ioctl (#130561)
185
186 * Tue Aug 24 2004 Jeremy Katz <katzj@redhat.com> - 4.1.3-1
187 - nash: make echo behavior consistent with other shells
188 - more fixes from Steve Grubb (#129673)
189
190 * Mon Aug 23 2004 Karsten Hopp <karsten@redhat.de> 4.1.2-1
191 - mkinitrd: add support for zfcp devices (mainframe)
192
193 * Thu Aug 19 2004 Jeremy Katz <katzj@redhat.com> - 4.1.1-1
194 - don't remove lost+found (#130327)
195 - don't try to mount/umount /sys on 2.4 (#130298)
196
197 * Tue Aug 17 2004 Jeremy Katz <katzj@redhat.com> - 4.1.0-1
198 - mkinitrd: if using udev for the initrd, set things up appropriately
199 (based on patches from Harald Hoyer and Thomas Woerner)
200 - nash: support for echo -n
201 - nash: better error message on exec failures
202 - nash: exec udev if we're called as a hotplug handler
203
204 * Mon Aug 16 2004 Jeremy Katz <katzj@redhat.com> - 4.0.6-1
205 - various fixes from a code review by Steve Grubb which should fix
206 some of the lingering problems (#129673)
207 - nash: warning fix from Michal Jaegermann (#129673)
208 - grubby: removal with (hd0,0)
209
210 * Thu Aug 12 2004 Jeremy Katz <katzj@redhat.com> - 4.0.5-1
211 - nash: oops, let's try that again
212
213 * Wed Aug 11 2004 Jeremy Katz <katzj@redhat.com> - 4.0.4-1
214 - nash: fix mounting by label in some cases (tracked down by
215 Erik Jacobson, #129581, #129673, #129667, #129635)
216
217 * Tue Aug 10 2004 Jeremy Katz <katzj@redhat.com> 4.0.3-1
218 - grubby: more (hd0,0) support (#125156)
219 - mkinitrd.8: update manpage (#129585)
220 - nash: fix some warnings
221
222 * Wed Aug 4 2004 Jeremy Katz <katzj@redhat.com> 4.0.2-1
223 - nash: support bind mounting
224 - grubby: support the (hd0,0)/path syntax for kernels and initrds in
225 grub.conf (#114758, #125156, #120906)
226
227 * Wed Aug 4 2004 Jeremy Katz <katzj@redhat.com> - 4.0.1-1
228 - improve handling of arguments to init with initramfs (#129057)
229
230 * Mon Aug 2 2004 Jeremy Katz <katzj@redhat.com> - 4.0.0-1
231 - create an initramfs on 2.6 kernels instead of an initrd
232 - use new mount magic instead of pivot_root
233 on 2.6 kernels
234 - try to handle the case of modules going away on kernel upgrades a
235 little bit more nicely (#123994)
236 - avoid over-zealous creation of /dev/mapper/control (#127115)
237 - improve nash(8) manpage (#127413)
238
239 * Fri Jun 18 2004 Jeremy Katz <katzj@redhat.com> - 3.5.24-1
240 - fix usb-storage detection with 2.6 (#126309)
241
242 * Tue May 18 2004 Jeremy Katz <katzj@redhat.com> - 3.5.23-1
243 - add support for RAID6
244
245 * Wed May 12 2004 Jeremy Katz <katzj@redhat.com>
246 - add support for multipath personality from Tom Callaway (#120379)
247
248 * Thu May 6 2004 Jeremy Katz <katzj@redhat.com> - 3.5.22-1
249 - bump initrd size (#122325)
250
251 * Wed Apr 14 2004 Jeremy Katz <katzj@redhat.com> - 3.5.21-1
252 - new-kernel-package: add patch from Ryan Tilder to allow setting new
253 kernel as default (#117605)
254 - mkinitrd: i2o_pci isn't in 2.6 (#120827)
255 - new-kernel-pkg: conditionalize kernel binary name for 2.6 vs 2.4
256 on ppc/ppc64 (as it's vmlinuz in 2.6 instead of the
257 vmlinux from 2.4) (#120868)
258
259 * Tue Apr 13 2004 Jeremy Katz <katzj@redhat.com> - 3.5.20-1
260 - mkinitrd: minor regex fix for some kernel names (#120624)
261
262 * Mon Feb 9 2004 Jeremy Katz <katzj@redhat.com> - 3.5.19-1
263 - nash/mkinitrd: quiet mode for nash and necessary mkinitrd changes
264 to work with it
265 - mkinitrd: add lxo's patch for copying lvm.conf (#112099)
266 - new-kernel-pkg: allow specifying the banner used in the boot loader config
267 on the command line (#114809)
268
269 * Tue Jan 13 2004 Jeremy Katz <katzj@redhat.com>
270 - mkinitrd: add patch from Alex Kiernan for modules with multiple
271 deps in 2.6 (#113306)
272
273 * Thu Jan 8 2004 Jeremy Katz <katzj@redhat.com> 3.5.18-1
274 - new-kernel-pkg: add a --kernel-arguments option (#113125)
275
276 * Tue Jan 6 2004 Jeremy Katz <katzj@redhat.com>
277 - fix ybin path (#112939)
278
279 * Sun Jan 4 2004 Jeremy Katz <katzj@redhat.com> 3.5.17-1
280 - mkinitrd: handle multiple spaces in modules.conf (from Lubomir Bulej)
281 - nash: rebuild against new dietlibc fixing problems with root=LABEL= (#112623)
282 - mkinitrd: determine kernel version and adjust modulefile appropriately
283 so that we look at /etc/modprobe.conf for 2.6 kernels
284 - mkinitrd: first pass at getting lvm working on 2.4 -> 2.6 upgrade
285
286 * Wed Dec 24 2003 Jeremy Katz <katzj@redhat.com>
287 - mkinitrd: quiet strip by default
288
289 * Mon Dec 22 2003 Jeremy Katz <katzj@redhat.com> 3.5.16.1-1
290 - make stripping less aggressive
291
292 * Mon Dec 22 2003 Jeremy Katz <katzj@redhat.com> 3.5.16-1
293 - fixing handling of non-lvm case when /dev/mapper/control isn't present
294 - add patch from Al Viro to get root dev in numeric form by grokking sysfs
295
296 * Tue Dec 9 2003 Jeremy Katz <katzj@redhat.com>
297 - strip modules if /usr/bin/strip exists (#111756)
298
299 * Fri Dec 5 2003 Jeremy Katz <katzj@redhat.com> 3.5.15-2
300 - require lvm2 so that it gets installed early enough
301
302 * Fri Dec 5 2003 Jeremy Katz <katzj@redhat.com> 3.5.15-1
303 - mkinitrd: add support for lvm2 (note: will not currently handle being
304 on a running 2.4 kernel and installing 2.6 with lvm rootfs)
305
306 * Wed Dec 3 2003 Jeremy Katz <katzj@redhat.com>
307 - nash: add mkdmnod for creating the device-mapper control node
308
309 * Thu Oct 2 2003 Jeremy Katz <katzj@redhat.com> 3.5.14-1
310 - fix dependency on /usr/bin/tail and /usr/bin/id
311
312 * Tue Sep 30 2003 Florian La Roche <Florian.LaRoche@redhat.de>
313 - remove one more mktemp dir for "all loopback devices in use" case
314
315 * Tue Sep 23 2003 Jeremy Katz <katzj@redhat.com> 3.5.13-1
316 - fix getting modules from /lib/modules/$(uname -r)/updates
317
318 * Mon Sep 22 2003 Jeremy Katz <katzj@redhat.com> 3.5.12-1
319 - argument checking and usage for /sbin/installkernel (#103109)
320
321 * Wed Sep 3 2003 Jeremy Katz <katzj@redhat.com> 3.5.11-1
322 - really only do grub configs on grub arches
323 - some usb mkinitrd fixes
324
325 * Fri Aug 29 2003 Jeremy Katz <katzj@redhat.com> 3.5.10-1
326 - clean up bogus warning in installkernel
327 - only try to do grub configs on arches which support grub (#103261)
328
329 * Thu Aug 7 2003 Matt Wilson <msw@redhat.com> 3.5.9-1
330 - add \n to error messages in grubby
331 - NUL terminate buffer returned from readlink properly
332 - symlinks are most likely relative, chdir to / before trying to
333 follow them
334 - yaboot needs boot prefix
335 - silo needs boot prefix too
336
337 * Wed Jul 30 2003 Jeremy Katz <katzj@redhat.com>
338 - grubby: don't segfault on label=\n (reported by dburcaw)
339
340 * Thu Jul 24 2003 Jeremy Katz <katzj@redhat.com>
341 - grubby: patch from zaitcev for uninitialized variable that can get
342 hit in the zipl case
343
344 * Mon Jul 21 2003 Jeremy Katz <katzj@redhat.com> 3.5.8-1
345 - bump initrd size (#99525)
346
347 * Wed Jul 9 2003 Jeremy Katz <katzj@redhat.com> 3.5.7-1
348 - pick modules from /lib/modules/$(uname -r)/updates first
349 - be less confused by more than one module of a name
350
351 * Wed Jun 25 2003 Jeremy Katz <katzj@redhat.com> 3.5.6-1
352 - unbreak reading module options from modules.conf again (#97982)
353
354 * Fri Jun 20 2003 Bill Nottingham <notting@redhat.com> 3.5.5-1
355 - fix modules.dep usage for 2.5/2.6
356
357 * Fri Jun 20 2003 Jeremy Katz <katzj@redhat.com> 3.5.4-1
358 - handle more bizarre modules.conf constructs (notting)
359
360 * Thu Jun 12 2003 Jeremy Katz <katzj@redhat.com> 3.5.3-1
361 - mkinitrd: fix copying of pvs (#97314, #97289)
362 - mkinitrd: use pvscan instead of lvmdiskscan to find PVs to work
363 better on other arches
364 - mkinitrd: better check for dasd existence
365 - mkinitrd: make certain lvm-mod is included if root on lvm
366
367 * Wed Jun 11 2003 Jeremy Katz <katzj@redhat.com> 3.5.2-1
368 - mkinitrd: revert use of modprobe -c. it breaks in the installer when we
369 don't have a modules.dep for the BOOT kernel
370 - nash: return pivot_root call correctly (#97753)
371
372 * Wed Jun 11 2003 Jeremy Katz <katzj@redhat.com> 3.5.1-1
373 - nash: fix syscall bits with gcc 3.3 on s390
374 - new-kernel-pkg: do depmod before mkinitrd (#97218)
375
376 * Tue Jun 10 2003 Jeremy Katz <katzj@redhat.com> 3.5.0-1
377 - mkinitrd: add patch from gc@mandrakesoft.com to determine module
378 deps from modules.dep (#87873)
379 - tweak patch to not break weird cases where module deps aren't all
380 you need :/
381 - grubby: don't remove the last kernel (#60041)
382 - mkinitrd: use modprobe -c to find module options (#89794)
383
384 * Tue May 20 2003 Matt Wilson <msw@redhat.com> 3.4.52-1
385 - use addSystemMap to build the image for iSeries (#91187)
386
387 * Fri May 16 2003 Jeremy Katz <katzj@redhat.com> 3.4.51-1
388 - grubby: error out gracefully if we run out of space (#85424)
389 - mkinitrd: copy parent dirs for pvs (#88962)
390 - mkinitrd: exit with an exit status if tar fails (#90123)
391 - new-kernel-pkg: only use the first entry for / (#90155)
392 - grubby: fix a buffer overflow (#90444)
393
394 * Wed Apr 30 2003 Jeremy Katz <katzj@redhat.com> 3.4.50-1
395 - fix typo in new-kernel-pkg for iSeries
396
397 * Wed Apr 30 2003 Elliot Lee <sopwith@redhat.com>
398 - BuildRequires: popt
399 - Change grubby Makefile to static-link popt a bit more cleanly
400
401 * Thu Apr 24 2003 Jeremy Katz <katzj@redhat.com> 3.4.49.1-1
402 - use Arjan's suggestion of vmlinitrd for the kernel + initrd combo file
403
404 * Thu Apr 24 2003 Jeremy Katz <katzj@redhat.com> 3.4.49-2
405 - fix description referencing /etc/conf.modules (#89558)
406
407 * Thu Apr 24 2003 Jeremy Katz <katzj@redhat.com> 3.4.49-2
408 - require ppc64-utils on ppc
409
410 * Fri Apr 18 2003 Jeremy Katz <katzj@redhat.com> 3.4.49-1
411 - new-kernel-pkg: on iSeries, we don't have a boot loader, just make the
412 kernel + initrd combo file (/boot/vmlinux-version.img)
413
414 * Mon Apr 07 2003 Karsten Hopp <karsten@redhat.com> 3.4.48-1
415 - Fix segfault on mainframe
416
417 * Wed Mar 26 2003 Jeremy Katz <katzj@redhat.com> 3.4.47-1
418 - mkinitrd: fix using options for loading modules
419 - mkinitrd: don't use kernel parameters for dasd at mkinitrd time,
420 use what's in modules.conf
421
422 * Mon Mar 24 2003 Jeremy Katz <katzj@redhat.com> 3.4.46-1
423 - new-kernel-pkg: add necessary bits for s390, some logic cleanups
424 - grubby: fix root detection for s390{,x}
425
426 * Sun Mar 23 2003 Jeremy Katz <katzj@redhat.com> 3.4.45-1
427 - grubby: add silo support (sparc)
428 - grubby: add zipl support (s390{,x})
429 - add grubby test cases for zipl support
430
431 * Wed Mar 19 2003 Jeremy Katz <katzj@redhat.com> 3.4.44.1-1
432 - fix dasd option reading
433
434 * Fri Mar 14 2003 Phil Knirsch <pknirsch@redhat.com> 3.4.44
435 - Added automatic dasd= parameters for kernel parameter on s390(x).
436
437 * Tue Mar 4 2003 Jeremy Katz <katzj@redhat.com> 3.4.43-1
438 - apply ppc patches for new-kernel-pkg and installkernel from Dan
439 Burcaw <dburcaw@terrasoftsolutions.com>
440 - man page tweak (#85471)
441
442 * Tue Feb 18 2003 Jeremy Katz <katzj@redhat.com> 3.4.42-1
443 - grubby: fix segfault from uninitialized variable (#84128)
444
445 * Tue Feb 11 2003 Jeremy Katz <katzj@redhat.com> 3.4.41-1
446 - nash: add readlink
447 - use readlink for rootdev to handle symlinks to root devs (#83391)
448
449 * Tue Feb 4 2003 Jeremy Katz <katzj@redhat.com> 3.4.40-1
450 - fix i2o module ordering (#83447)
451 - ifarch'd build requires of dietlibc now that the build system has a way to
452 handle these
453
454 * Sat Feb 01 2003 Florian La Roche <Florian.LaRoche@redhat.de>
455 - change one test from a number to a string test that could otherwise
456 fail in not properly setup chroot environments
457
458 * Fri Jan 31 2003 <ewt@redhat.com>
459 - added support for yaboot
460 - test script runs tests for all platforms
461 - separated elilo configuration from lilo mode, allowing elilo specific
462 tests to be run on any platform
463
464 * Sun Jan 26 2003 <ewt@redhat.com>
465 - grubby now shortens lilo titles to ensure they are less then 16 characters
466 long (76236)
467 - mkinitrd would only turn on /dev/md0 if raid was needed; now it enables
468 all raid devices listed in /proc/mdstat (82209)
469 - use product name from /etc/redhat-release to generate label in grub.conf
470 (82352)
471
472 * Mon Jan 20 2003 Bill Nottingham <notting@redhat.com> 3.4.36-1
473 - don't error out running awk on /proc/mdstat if /proc/mdstat isn't
474 there
475
476 * Tue Jan 14 2003 <ewt@redhat.com>
477 - all mkdev() actions will create directories as needed (some code in
478 mkdevices is now obsolete; I'll remove it later) (#73317)
479 - added mkdev command to test the above
480 - support diratime/nodiratime mount options (#78738)
481 - grubby will follow symlinks when writing new config file (#78713)
482 - don't depend on raidtab, use /proc/mdstat instead (#80424) this covers
483 both mkinitrd and grubby
484
485 * Sun Jan 5 2003 Jeremy Katz <katzj@redhat.com> 3.4.34-1
486 - grubby: fix segfault finding default if default doesn't have a root= (#66000)
487 - don't include usb modules by default. pass --with-usb to get usb modules
488 - make sure kudzu exists before trying to exec it
489 - handle multiple scsi hosts being present (#77422)
490 - add /usr/sbin to default path (#79581)
491 - fix using --builtin= (#80448)
492 - grubby: preserve the mode on config files (#80776)
493
494 * Mon Dec 16 2002 Jeremy Katz <katzj@redhat.com>
495 - errno fixes
496
497 * Tue Dec 03 2002 Florian La Roche <Florian.LaRoche@redhat.de>
498 - /sbin/new-kernel-pkg: fix a test to have correct ""
499
500 * Fri Nov 22 2002 Jeremy Katz <katzj@redhat.com>
501 - mkinitrd: more gzipped module fixes
502
503 * Thu Nov 21 2002 Jeremy Katz <katzj@redhat.com>
504 - mkinitrd: add support for finding gzipped modules
505 - mkinitrd: don't be noisy if we don't have lvm-mod loaded
506
507 * Wed Nov 6 2002 Jeremy Katz <katzj@redhat.com>
508 - grubby: don't bail when looking for root in appends of lilo-style configs
509 - include grubby on x86_64
510
511 * Thu Sep 26 2002 Nalin Dahyabhai <nalin@redhat.com>
512 - fix some syntax errors
513 - use grep's -q flag to save a redirect in places where we're not redirecting
514 stderr
515
516 * Thu Sep 5 2002 Jeremy Katz <katzj@redhat.com>
517 - grubby could segfault by going into its lilo checking if it couldn't find
518 a default to copy (default had no root= and --bad-image-okay wasn't
519 being used)
520
521 * Mon Sep 2 2002 Jeremy Katz <katzj@redhat.com>
522 - nash: create directories if needed in mkdevices command (#73090)
523 - grubby: handle lilo case of non-linux default (#72202)
524
525 * Sat Aug 31 2002 Jeremy Katz <katzj@redhat.com>
526 - grubby: fix for case like 'append = " hdc=ide-scsi "' (#68802)
527
528 * Fri Aug 30 2002 Bill Nottingham <notting@redhat.com>
529 - fix firewire stuff (#72916)
530
531 * Fri Aug 23 2002 Bill Nottingham <notting@redhat.com>
532 - fix mpt fusion stuff
533
534 * Tue Aug 13 2002 Jeremy Katz <katzj@redhat.com>
535 - /boot/efi/redhat -> /boot/efi/EFI/redhat on ia64
536
537 * Sun Aug 11 2002 Jeremy Katz <katzj@redhat.com>
538 - fix grubby to work correctly on ia64
539
540 * Thu Aug 08 2002 Michael Fulbright <msf@redhat.com>
541 - added sleep command to nash and fixed creating initrd with / or /boot on usb
542
543 * Tue Jul 30 2002 Jeremy Katz <katzj@redhat.com>
544 - grubby: adding kernels to lilo.conf when not using root=LABEL will work
545 now too
546
547 * Fri Jul 26 2002 Erik Troan <ewt@redhat.com>
548 - didn't close /proc/partitions in mkdevices
549
550 * Thu Jul 25 2002 Jeremy Katz <katzj@redhat.com>
551 - grubby: fix adding kernels to lilo when using root=LABEL
552
553 * Wed Jul 24 2002 Erik Troan <ewt@redhat.com>
554 - added and used mkdevices command (68959)
555
556 * Wed Jul 17 2002 Erik Troan <ewt@redhat.com>
557 - do proper probing to check root=LABEL
558 - --bootloader-probe didn't support /etc/sysconfig/grub
559
560 * Fri Jul 12 2002 Erik Troan <ewt@redhat.com>
561 - don't sanity check root=LABEL right now; probing might make sense?
562
563 * Wed Jul 10 2002 Erik Troan <ewt@redhat.com>
564 - --ifneeded is obsolete; we always need initrds
565 - grubby lets you specify multiple indexes for --info
566 - grubby lets you select kernels by title
567 - added showlabels to nash
568 - new-kernel-pkg sets the root device from /etc/fstab rather then inheriting it
569 - new-kernel-pkg removes all entries w/ a duplicate label (67459)
570
571 * Mon Jul 08 2002 Erik Troan <ewt@redhat.com>
572 - usb root device code could fail, causing no initrd to be made
573
574 * Thu Jun 27 2002 Erik Troan <ewt@redhat.com>
575 - grubby didn't add new kernels properly
576
577 * Thu Jun 27 2002 Erik Troan <ewt@redhat.com>
578 - support root on usb devices
579
580 * Wed Jun 26 2002 Erik Troan <ewt@redhat.com>
581 - other= in lilo.conf wasn't being parsed out properly
582
583 * Mon Jun 24 2002 Erik Troan <ewt@redhat.com>
584 - changed --add-kernel implementation so that --args gets handled properly
585
586 * Sun Jun 23 2002 Erik Troan <ewt@redhat.com>
587 - added loadinitrd (used by mkbootdisk) on ia32 and sparc
588 - modules "off" and "null" should be ignored (67086)
589 - mkrootdev looks for root=LABEL=/ in /proc/cmdline, so root by label
590 works again (fully determined by root= kernel parameter)
591 - added --update-kernel and --remove-args arguments to grubby
592 - kernel specification of ALL supported by grubby
593 - DEFAULT accepted much more consistently
594 - grubby --info displays info on all kernels specified, not just the first
595 - ext3 need mbcache now (67354)
596 - grubby allows config file entry numbers to be used as kernel paths
597 - support /etc/sysconfig/grub.conf
598 - display lba info from lilo.conf file in --info
599
600 * Thu Jun 13 2002 Jeremy Katz <katzj@redhat.com>
601 - don't run lilo twice on kernel removal in new-kernel-pkg
602 - don't run grubby to add/remove kernels from new-kernel-pkg if
603 bootloader config doesn't
604
605 * Tue Jun 11 2002 Erik Troan <ewt@redhat.com>
606 - added --bootloader-probe to grubby
607 - wrote a man page for grubby
608 - include grubby on ia64
609 - updated new-kernel-pkg to work with lilo/elilo
610 - added --info=DEFAULT option
611
612 * Mon Jun 10 2002 Jeremy Katz <katzj@redhat.com>
613 - start raid before lvm so that you can have root on lvm on raid (#66175)
614
615 * Tue Jun 04 2002 Erik Troan <ewt@redhat.com>
616 - failed to initialize a variable in grubby
617
618 * Fri May 31 2002 Erik Troan <ewt@redhat.com>
619 - added --grub option so grub tests could run on ia64
620 - added some basic tests of lilo default directive handling
621
622 * Wed May 29 2002 Jeremy Katz <katzj@redhat.com>
623 - require lvm
624
625 * Tue May 28 2002 Bill Nottingham <notting@redhat.com>
626 - fix umounting of /initrd when pivoting
627
628 * Tue May 28 2002 Erik Troan <ewt@redhat.com>
629 - marked /sbin/installkernel as %config (53006)
630 - run make test during build
631
632 * Wed May 22 2002 Erik Troan <ewt@redhat.com>
633 - added --nopivot (53679)
634 - honor INSTALL_PATH in installkernel (32833)
635 - installkernel versions old kernels as well (52756)
636 - lilo support added to grubby
637
638 * Tue May 21 2002 Erik Troan <ewt@redhat.com>
639 - cleaned up usage message
640 - added --omit-lvm-modules to man page
641 - added --builtin option (65250)
642 - skip comments in fstab (65249)
643 - added findlodev to nash, use that to pick block device (63421)
644 - support -o option in nash's mount (59185)
645 - look for xfs_dmapi (60066)
646 - added > support for executed commands (61180)
647 - grubby copies permissions from old config file (59227)
648 - use options from fstab for root filesystem (56071)
649 - try and be better about returning nonzero on error (60203)
650 - make modprobe symlink properly to avoid kernel message (62145)
651 - support linear raid (12775)
652 - support fallback option in grub config (54794)
653 - comments in template entries not handled quite right (65198)
654
655 * Sat Apr 20 2002 Erik Troan <ewt@redhat.com>
656 - grubby does a better job of not adding superfluous default= lines
657
658 * Wed Apr 17 2002 Erik Troan <ewt@redhat.com>
659 - preload works again
660
661 * Wed Apr 10 2002 Jeremy Katz <katzj@redhat.com>
662 - revert to not mounting by label
663
664 * Fri Apr 5 2002 Jeremy Katz <katzj@redhat.com>
665 - include pbrown's changes to load parport_pc when needing ppa.o (#35360)
666
667 * Thu Apr 4 2002 Jeremy Katz <katzj@redhat.com>
668 - fix redirection bug (#62623)
669 - create proper link of /sbin->/bin in initrd (#62199)
670
671 * Thu Mar 28 2002 Jeremy Katz <katzj@redhat.com>
672 - prereq dev package so that we always have the dev package before we get run
673
674 * Fri Mar 22 2002 Jeremy Katz <katzj@redhat.com>
675 - duh, that won't work. fix it
676 - don't require lvm tools right now
677
678 * Thu Mar 21 2002 Jeremy Katz <katzj@redhat.com>
679 - fix nash to create directories for devices like cciss and ida
680
681 * Tue Feb 5 2002 Bill Nottingham <notting@redhat.com>
682 - run mkinitrd with -f in new-kernel-pkg
683 - don't run lilo in /sbin/installkernel
684
685 * Fri Feb 1 2002 Jeremy Katz <katzj@redhat.com>
686 - require lvm
687
688 * Thu Jan 31 2002 Jeremy Katz <katzj@redhat.com>
689 - clean up warnings for when /proc isn't mounted
690
691 * Tue Jan 29 2002 Jeremy Katz <katzj@redhat.com>
692 - fix probing for LVM usage to require a volume group to exist before adding
693 the module
694 - --omit-lvm-modules will omit LVM modules
695 - add support for root device being LVM
696
697 * Wed Jan 16 2002 Erik Troan <ewt@redhat.com>
698 - look for a non /tmpfs directory
699 - added support for xfs
700 - use with raid md.o if it exists
701 - fixed bug in echo
702 - use find form nash rather then /usr (mkinitrd shouldn't need /usr
703 mounted)
704
705 * Fri Jan 11 2002 Erik Troan <ewt@redhat.com>
706 - added support for mounting root filesystem by label
707 - switched to dietlibc from minilibc
708 - fix so --preload= works [33675,57560,44377]
709 - added info on --image-version and --nocompress to man page [57560]
710 - set fileystem check interval to 0 in case the system clock
711 is borked [51454]
712 - give a proper error when run by a user other then root [27218,53159]
713 - grubby statically linked against popt [55305]
714 - cleaned up verbose output a bit [21791]
715
716 * Tue Dec 18 2001 Trond Eivind Glomsrød <teg@redhat.com>
717 - Add LVM module when LVM is used
718
719 * Wed Sep 5 2001 Jeremy Katz <katzj@redhat.com>
720 - grubby shouldn't blow away default=saved lines (#52981)
721
722 * Fri Aug 31 2001 Jeremy Katz <katzj@redhat.com>
723 - fix new-kernel-pkg --mkinitrd for ia64
724
725 * Thu Aug 30 2001 Erik Troan <ewt@redhat.com>
726 - fixed bug handling invalid default (MF #52889)
727 - in some cases we would set the default to point at a removed image
728
729 * Wed Aug 29 2001 Erik Troan <ewt@redhat.com>
730 - minor grubby fixes
731
732 * Tue Aug 28 2001 Jeremy Katz <katzj@redhat.com>
733 - let new-kernel-pkg be able to do more (initrds, modules.*)
734 - include grubby only on x86
735
736 * Mon Aug 27 2001 Jeremy Katz <katzj@redhat.com>
737 - more grubby fixups for having a /boot
738 - added new-kernel-pkg
739
740 * Sun Aug 26 2001 Erik Troan <ewt@redhat.com>
741 - added grubby
742 - added installkernel
743
744 * Fri Aug 3 2001 Matt Wilson <msw@redhat.com>
745 - make consoles with the correct minor numbers
746 - applied patch from hjl to fix fstab parsing (#50819)
747
748 * Fri Jul 20 2001 Jeremy Katz <katzj@redhat.com>
749 - skip errors finding jbd as a module if we're skipping them trying to find
750 ext3 so that you can build a kernel with ext3 built-in and still use an
751 initrd
752
753 * Wed Jul 11 2001 Bill Nottingham <notting@redhat.com>
754 - don't print errors if /etc/raidtab doesn't exist
755 - or /etc/{modules.conf,conf.modules}, for that matter
756
757 * Fri Jul 6 2001 Matt Wilson <msw@redhat.com>
758 - don't dig through /etc/fstab to find out if we have a filesystem on
759 a RAID device, it's usually mounted by label so /dev/mdN isn't there
760 at all (#46525)
761
762 * Tue Jun 26 2001 Bill Nottingham <notting@redhat.com>
763 - require filesystem >= 2.1.0, otherwise we don't boot
764
765 * Thu Jun 21 2001 Erik Troan <ewt@redhat.com>
766 - added a bunch of commands to nash
767 - use pivot_root
768 - support ext3
769
770 * Fri Jun 08 2001 Florian La Roche <Florian.LaRoche@redhat.de>
771 - delete the exclusivearch line completely
772
773 * Fri Mar 23 2001 Matt Wilson <msw@redhat.com>
774 - reset the state of findmodule after getting the modules we need
775
776 * Wed Feb 28 2001 Matt Wilson <msw@redhat.com>
777 - changed the Requires on mktemp from >= 1.5 to >= 1.5-5 (which included
778 -d support) (#30127)
779
780 * Fri Feb 23 2001 Erik Troan <ewt@redhat.com>
781 - let nash be invoked as modprobe to avoid a modprobe failure to exec
782 - nash will try to run arbitrary commands now (removing insmod as a special
783 case)
784
785 * Mon Feb 12 2001 Matt Wilson <msw@redhat.com>
786 - add findutils to Requires line (#27269)
787
788 * Thu Feb 8 2001 Matt Wilson <msw@redhat.com>
789 - added checks to load the modules i2o_block needs
790
791 * Wed Feb 7 2001 Bill Nottingham <notting@redhat.com>
792 - fix utterly broken build
793
794 * Wed Jan 31 2001 Helge Deller <hdeller@redhat.com>
795 - added mandir to nash Makefile (RH 6.x compatibility)
796
797 * Tue Jan 30 2001 Erik Troan <ewt@redhat.com>
798 - added dependency on mktemp
799
800 * Thu Jan 25 2001 Erik Troan <ewt@redhat.com>
801 - we need to insert xor.o before raid5.o
802
803 * Wed Jan 24 2001 Matt Wilson <msw@redhat.com>
804 - code in RAID_AUTORUN ioctl fallback
805 - fixed raidstart check flag from -z to -n
806
807 * Tue Jan 23 2001 Erik Troan <ewt@redhat.com>
808 - switched to using nash from sash
809
810 * Tue Jan 23 2001 Matt Wilson <msw@redhat.com>
811 - added patch from twaugh to avoid blindly adding scsi_mod
812 and sd_mod to initrd if they are not needed (#24114)
813
814 * Thu Jan 11 2001 Bernhard Rosenkraenzer <bero@redhat.com>
815 - Enlarge initrds, needed for systems with both IDE and SCSI
816 (Bug #23846)
817 - Version 2.[6789] probably shouldn't identify itself as 2.6
818 with --version. ;)
819 - bzip2 source
820
821 * Wed Dec 20 2000 Erik Troan <ewt@redhat.com>
822 - let the kernel autoload ide-cd
823
824 * Fri Dec 08 2000 Erik Troan <ewt@redhat.com>
825 - added modular ide support
826
827 * Wed Aug 30 2000 Nalin Dahyabhai <nalin@redhat.com>
828 - use mktemp to create temporary files and directories
829
830 * Sat Aug 05 2000 Erik Troan <ewt@redhat.com>
831 - changes from Keith Owens for 2.4
832
833 * Tue Jul 4 2000 Matt Wilson <msw@redhat.com>
834 - build on alpha
835
836 * Mon Jun 26 2000 Bill Nottingham <notting@redhat.com>
837 - ignore 'unknown' aliases (they shouldn't be there anyways)
838
839 * Thu Jun 1 2000 Bill Nottingham <notting@redhat.com>
840 - build on ia64
841 - bump up initrd size on ia64
842 - modules.confiscation, /usr/man -> /usr/share/man
843
844 * Tue May 2 2000 Nalin Dahyabhai <nalin@redhat.com>
845 - make RPM pick up man page, regardless of compression
846
847 * Tue Feb 29 2000 Matt Wilson <msw@redhat.com>
848 - add requirement for /sbin/losetup
849
850 * Mon Feb 7 2000 Matt Wilson <msw@redhat.com>
851 - gzip manpage
852
853 * Thu Feb 3 2000 Matt Wilson <msw@redhat.com>
854 - gzip manpage
855
856 * Mon Jan 10 2000 Erik Troan <ewt@redhat.com>
857 - use sash, not ash
858
859 * Mon Jan 3 2000 Matt Wilson <msw@redhat.com>
860 - use ash.static for /bin/sh, not sash
861
862 * Sat Jan 1 2000 Erik Troan <ewt@redhat.com>
863 - configure loopback devices
864
865 * Tue Sep 28 1999 Bill Nottingham <notting@redhat.com>
866 - sparc fixup from jakub
867
868 * Wed Sep 22 1999 Michael K. Johnson <johnsonm@redhat.com>
869 - fix cleanup (blush!)
870
871 * Tue Sep 21 1999 Michael K. Johnson <johnsonm@redhat.com>
872 - now works when /usr is not mounted (do not rely on /usr/bin/install)
873 - slight cleanups, better usage message
874
875 * Thu Jul 29 1999 Michael K. Johnson <johnsonm@redhat.com>
876 - Now automatically includes necessary raid modules
877 - --omit-raid-modules now omits raid modules
878 - tiny doc updates
879
880 * Thu Jul 29 1999 Bill Nottingham <notting@redhat.com>
881 - updates from bugzila (#4243, #4244)
882
883 * Sat Mar 27 1999 Matt Wilson <msw@redhat.com>
884 - --omit-scsi-modules now omits all scsi modules
885 - updated documentation
886 - mkinitrd now grabs scsi_hostadapter modules from anywhere -
887 some RAID controller modules live in block/
888
889 * Thu Feb 25 1999 Matt Wilson <msw@redhat.com>
890 - updated description
891
892 * Mon Jan 11 1999 Matt Wilson <msw@redhat.com>
893 - Ignore the absence of scsi modules, include them if they are there, but
894 don't complain if they are not.
895 - changed --no-scsi-modules to --omit-scsi-modules (as it should have been)
896
897 * Thu Nov 5 1998 Jeff Johnson <jbj@redhat.com>
898 - import from ultrapenguin 1.1.
899
900 * Tue Oct 20 1998 Jakub Jelinek <jj@ultra.linux.cz>
901 - fix for combined sparc/sparc64 insmod, also pluto module is really
902 fc4:soc:pluto and we don't look at deps, so special case it.
903
904 * Sat Aug 29 1998 Erik Troan <ewt@redhat.com>
905 - replaced --needs-scsi-mods (which is now the default) with
906 --omit-scsi-mods
907
908 * Fri Aug 7 1998 Jeff Johnson <jbj@redhat.com>
909 - correct obscure regex/shell interaction (hardwires tabs on line 232)
910
911 * Mon Jan 12 1998 Erik Troan <ewt@redhat.com>
912 - added 'make archive' rule to Makefile
913 - rewrote install procedure for more robust version handling
914 - be smarter about grabbing options from /etc/conf.modules
915
916 * Mon Oct 20 1997 Erik Troan <ewt@redhat.com>
917 - made it use /bin/ash.static
918
919 * Wed Apr 16 1997 Erik Troan <ewt@redhat.com>
920 - Only use '-s' to install binaries if /usr/bin/strip is present.
921 - Use an image size of 2500 if binaries can't be stripped (1500 otherwise)
922 - Don't use "mount -o loop" anymore -- losetup the proper devices manually
923 - Requires losetup, e2fsprogs
924
925 * Wed Mar 12 1997 Michael K. Johnson <johnsonm@redhat.com>
926 - Fixed a bug in parsing options.
927 - Changed to use a build tree, then copy the finished tree into the
928 image after it is built.
929 - Added patches derived from ones written by Christian Hechelmann which
930 add an option to put the kernel version number at the end of the module
931 name and use install -s to strip binaries on the fly.

admin@koozali.org
ViewVC Help
Powered by ViewVC 1.2.1 RSS 2.0 feed