/[smeserver]/rpms/mkinitrd/sme7/mkinitrd.spec
ViewVC logotype

Contents of /rpms/mkinitrd/sme7/mkinitrd.spec

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph


Revision 1.4 - (show annotations) (download)
Mon Aug 24 14:52:58 2009 UTC (15 years, 2 months ago) by slords
Branch: MAIN
CVS Tags: mkinitrd-4_2_1_13-4
Changes since 1.3: +12 -12 lines
Import CentOS 4.8 sources

1 Summary: Creates an initial ramdisk image for preloading modules.
2 Name: mkinitrd
3 Version: 4.2.1.13
4 Release: 4
5 License: GPL
6 Group: System Environment/Base
7 Source: mkinitrd-%{version}.tar.bz2
8 Patch0: mkinitrd-kernel-cmdline-spaces.patch
9 Patch1: mkinitrd-4.2.1.13-bz479239-virtio.patch
10 ExclusiveOs: Linux
11 Prereq: dev
12 Requires: e2fsprogs, /bin/sh, fileutils, grep, mount, gzip, tar, /sbin/insmod.static, /sbin/losetup, mktemp >= 1.5-5, findutils, lvm2, kudzu, /usr/bin/which
13 Requires: filesystem >= 2.1.0, cpio
14 Conflicts: udev < 0:032
15 BuildRequires: popt
16 %ifarch i386
17 BuildRequires: dietlibc
18 %endif
19 %ifarch ppc
20 Requires: ppc64-utils >= 0.3-1
21 %endif
22 BuildRoot: %{_tmppath}/%{name}-root
23
24 %description
25 Mkinitrd creates filesystem images for use as initial ramdisk (initrd)
26 images. These ramdisk images are often used to preload the block
27 device modules (SCSI or RAID) needed to access the root filesystem.
28
29 In other words, generic kernels can be built without drivers for any
30 SCSI adapters which load the SCSI driver as a module. Since the
31 kernel needs to read those modules, but in this case it isn't able to
32 address the SCSI adapter, an initial ramdisk is used. The initial
33 ramdisk is loaded by the operating system loader (normally LILO) and
34 is available to the kernel as soon as the ramdisk is loaded. The
35 ramdisk image loads the proper SCSI adapter and allows the kernel to
36 mount the root filesystem. The mkinitrd program creates such a
37 ramdisk using information found in the /etc/modules.conf file.
38
39 %prep
40 %setup -q
41 %patch0 -p1 -b .spaces
42 %patch1 -p1 -b .virtio
43
44 %build
45 make
46 make test
47 if [ $? != 0 ]; then exit 1; fi
48
49 %install
50 rm -rf $RPM_BUILD_ROOT
51 make BUILDROOT=$RPM_BUILD_ROOT mandir=%{_mandir} install
52
53 %clean
54 rm -rf $RPM_BUILD_ROOT
55
56 %files
57 %defattr(-,root,root)
58 %attr(755,root,root) /sbin/mkinitrd
59 %attr(644,root,root) %{_mandir}/man8/mkinitrd.8*
60 %attr(755,root,root) /sbin/nash
61 %attr(644,root,root) %{_mandir}/man8/nash.8*
62 %config %attr(755,root,root) /sbin/installkernel
63 %attr(755,root,root) /sbin/new-kernel-pkg
64 %attr(755,root,root) /sbin/grubby
65 %attr(644,root,root) %{_mandir}/man8/grubby.8*
66
67 %changelog
68 * Tue Jan 13 2009 Peter Jones <pjones@redhat.com> - 4.2.1.13-4
69 - Add virtio support (hansg)
70 Resolves: rhbz#479239
71
72 * Tue Sep 25 2007 Peter Jones <pjones@redhat.com> - 4.2.1.13-2
73 - Support quoted spaces on the kernel command line
74 Resolves: #240777
75
76 * Tue Aug 8 2007 Peter Jones <pjones@redhat.com> - 4.2.1.13-1
77 - Fix linking error
78 Related: #214841
79
80 * Tue Aug 7 2007 Peter Jones <pjones@redhat.com> - 4.2.1.12-1
81 - Fix "make test" regression
82 Related: #214841
83
84 * Tue Aug 7 2007 Peter Jones <pjones@redhat.com> - 4.2.1.11-1
85 - Use dynamic buffer for input file.
86 Resolves: #214841
87 - Fix spelling errors in grubby.8
88 Resolves: #230605
89 - Fix "--without-usb" and "--with-usb" handling.
90 Resolves: #246069
91
92 * Wed Feb 7 2007 Peter Jones <pjones@redhat.com> - 4.2.1.10-1.1
93 - Fix 'requires' for usb changes.
94 Related: #202070
95
96 * Fri Jan 31 2007 Peter Jones <pjones@redhat.com> - 4.2.1.10-1
97 - Allow use of usb devices as the root filesystem
98 Resolves: #202070
99
100 * Thu Jan 30 2007 Peter Jones <pjones@redhat.com> - 4.2.1.9-1
101 - Fix handling of modprobe options when they span multiple lines
102 Resolves: #184544
103
104 * Mon Apr 10 2006 Peter Jones <pjones@redhat.com> - 4.2.1.8-1
105 - Fix mangling of mount when using device mapper (#171872)
106 - Fix lvm striping (#174678, patch from Bastien Nocera)
107
108 * Wed Aug 31 2005 Peter Jones <pjones@redhat.com> - 4.2.1.6-1
109 - Handle short reads correctly when dealing with files in /proc (#137816)
110
111 * Mon Aug 29 2005 Peter Jones <pjones@redhat.com> - 4.2.1.5-1
112 - More fixes for duplicate arguments (#147222)
113
114 * Mon Apr 4 2005 Peter Jones <pjones@redhat.com> - 4.2.1.5-1
115 - Don't consolidate duplicates in "--args" (#147222)
116
117 * Fri Apr 1 2005 Peter Jones <pjones@redhat.com> - 4.2.1.4-1
118 - close /init just after reading the file, instead of after runStartup()
119 finishes, so it gets closed before we exec() /sbin/init . (#145601)
120
121 * Thu Mar 17 2005 Peter Jones <pjones@redhat.com> - 4.2.1.3-1
122 - Don't do vgmknodes (more of #151172)
123
124 * Tue Mar 15 2005 Peter Jones <pjones@redhat.com> - 4.2.1.2-1
125 - Fix clustered volume group locking in the initrd during vgscan/vgchange,
126 and only activate the volume group / lives on (#151172)
127
128 * Mon Mar 14 2005 Peter Jones <pjones@redhat.com> - 4.2.1.1-1
129 - Make getArg return NULL on cmd=NULL, fixing #144472 . Based on a
130 patch from Kasper Dupont.
131 - Make nash expand environment variables on command lines (#144474)
132 - Make nash check pids returned from wait*() (#145660)
133
134 * Wed Nov 3 2004 Jeremy Katz <katzj@redhat.com>
135 - handle machines with lots of disks in /proc/partitions (#137816)
136
137 * Sun Oct 24 2004 Jeremy Katz <katzj@redhat.com>
138 - require cpio (#136814)
139
140 * Sun Oct 17 2004 Jeremy Katz <katzj@redhat.com> - 4.1.18-1
141 - fix UPDATEDEFAULT with new-kernel-pkg (#135997)
142
143 * Fri Oct 15 2004 Jeremy Katz <katzj@redhat.com> - 4.1.17-1
144 - run udevstart again instead of sleeping, this will ensure all
145 devices are created in all cases after modules have been
146 loaded (thanks to notting)
147
148 * Fri Oct 15 2004 Jeremy Katz <katzj@redhat.com> - 4.1.16-1
149 - mkinitrd: Sleep briefly to let udev finish creating devices
150
151 * Wed Oct 13 2004 Jeremy Katz <katzj@redhat.com> - 4.1.15-1
152 - new-kernel-pkg: set new kernels as default (#135161) when
153 a) /etc/sysconfig/kernel contains UPDATEDEFAULT=yes
154 b) --package foo is passed in and foo matches DEFAULTKERNEL
155 in /etc/sysconfig/kernel
156
157 * Thu Sep 30 2004 Jeremy Katz <katzj@redhat.com> - 4.1.14-1
158 - support changing root on the kernel command line with lvm (#133236)
159
160 * Wed Sep 22 2004 Jeremy Katz <katzj@redhat.com> - 4.1.12-1
161 - update to work with udev 032, conflict with old udev
162 - if udev is present, use it. trying to avoid the use of udev if it's
163 installed is the road to things not working
164
165 * Fri Sep 10 2004 Jeremy Katz <katzj@redhat.com> - 4.1.11-1
166 - more fixing
167
168 * Wed Sep 8 2004 Jeremy Katz <katzj@redhat.com> - 4.1.10-1
169 - mkinitrd: mount tmpfs with the right permissions
170
171 * Tue Aug 31 2004 Jeremy Katz <katzj@redhat.com> - 4.1.9-1
172 - mkinitrd: use tmpfs instead of ramfs for udev stuff
173
174 * Fri Aug 27 2004 Jeremy Katz <katzj@redhat.com> - 4.1.8-1
175 - nash: and the hack to fix ppc broke other arches, conditionalize it (#130928)
176
177 * Wed Aug 25 2004 Jeremy Katz <katzj@redhat.com> - 4.1.6-1
178 - nash: fix another off by one (#130987)
179 - nash: hack to fix ppc booting (#130928)
180
181 * Tue Aug 25 2004 Karsten Hopp <karsten@redhat.com> - 4.1.5-1
182 - fix zfcp handling
183
184 * Tue Aug 24 2004 Jeremy Katz <katzj@redhat.com> - 4.1.4-1
185 - nash: create raid device if needed (think udev) before calling
186 the raidautorun ioctl (#130561)
187
188 * Tue Aug 24 2004 Jeremy Katz <katzj@redhat.com> - 4.1.3-1
189 - nash: make echo behavior consistent with other shells
190 - more fixes from Steve Grubb (#129673)
191
192 * Mon Aug 23 2004 Karsten Hopp <karsten@redhat.de> 4.1.2-1
193 - mkinitrd: add support for zfcp devices (mainframe)
194
195 * Thu Aug 19 2004 Jeremy Katz <katzj@redhat.com> - 4.1.1-1
196 - don't remove lost+found (#130327)
197 - don't try to mount/umount /sys on 2.4 (#130298)
198
199 * Tue Aug 17 2004 Jeremy Katz <katzj@redhat.com> - 4.1.0-1
200 - mkinitrd: if using udev for the initrd, set things up appropriately
201 (based on patches from Harald Hoyer and Thomas Woerner)
202 - nash: support for echo -n
203 - nash: better error message on exec failures
204 - nash: exec udev if we're called as a hotplug handler
205
206 * Mon Aug 16 2004 Jeremy Katz <katzj@redhat.com> - 4.0.6-1
207 - various fixes from a code review by Steve Grubb which should fix
208 some of the lingering problems (#129673)
209 - nash: warning fix from Michal Jaegermann (#129673)
210 - grubby: removal with (hd0,0)
211
212 * Thu Aug 12 2004 Jeremy Katz <katzj@redhat.com> - 4.0.5-1
213 - nash: oops, let's try that again
214
215 * Wed Aug 11 2004 Jeremy Katz <katzj@redhat.com> - 4.0.4-1
216 - nash: fix mounting by label in some cases (tracked down by
217 Erik Jacobson, #129581, #129673, #129667, #129635)
218
219 * Tue Aug 10 2004 Jeremy Katz <katzj@redhat.com> 4.0.3-1
220 - grubby: more (hd0,0) support (#125156)
221 - mkinitrd.8: update manpage (#129585)
222 - nash: fix some warnings
223
224 * Wed Aug 4 2004 Jeremy Katz <katzj@redhat.com> 4.0.2-1
225 - nash: support bind mounting
226 - grubby: support the (hd0,0)/path syntax for kernels and initrds in
227 grub.conf (#114758, #125156, #120906)
228
229 * Wed Aug 4 2004 Jeremy Katz <katzj@redhat.com> - 4.0.1-1
230 - improve handling of arguments to init with initramfs (#129057)
231
232 * Mon Aug 2 2004 Jeremy Katz <katzj@redhat.com> - 4.0.0-1
233 - create an initramfs on 2.6 kernels instead of an initrd
234 - use new mount magic instead of pivot_root
235 on 2.6 kernels
236 - try to handle the case of modules going away on kernel upgrades a
237 little bit more nicely (#123994)
238 - avoid over-zealous creation of /dev/mapper/control (#127115)
239 - improve nash(8) manpage (#127413)
240
241 * Fri Jun 18 2004 Jeremy Katz <katzj@redhat.com> - 3.5.24-1
242 - fix usb-storage detection with 2.6 (#126309)
243
244 * Tue May 18 2004 Jeremy Katz <katzj@redhat.com> - 3.5.23-1
245 - add support for RAID6
246
247 * Wed May 12 2004 Jeremy Katz <katzj@redhat.com>
248 - add support for multipath personality from Tom Callaway (#120379)
249
250 * Thu May 6 2004 Jeremy Katz <katzj@redhat.com> - 3.5.22-1
251 - bump initrd size (#122325)
252
253 * Wed Apr 14 2004 Jeremy Katz <katzj@redhat.com> - 3.5.21-1
254 - new-kernel-package: add patch from Ryan Tilder to allow setting new
255 kernel as default (#117605)
256 - mkinitrd: i2o_pci isn't in 2.6 (#120827)
257 - new-kernel-pkg: conditionalize kernel binary name for 2.6 vs 2.4
258 on ppc/ppc64 (as it's vmlinuz in 2.6 instead of the
259 vmlinux from 2.4) (#120868)
260
261 * Tue Apr 13 2004 Jeremy Katz <katzj@redhat.com> - 3.5.20-1
262 - mkinitrd: minor regex fix for some kernel names (#120624)
263
264 * Mon Feb 9 2004 Jeremy Katz <katzj@redhat.com> - 3.5.19-1
265 - nash/mkinitrd: quiet mode for nash and necessary mkinitrd changes
266 to work with it
267 - mkinitrd: add lxo's patch for copying lvm.conf (#112099)
268 - new-kernel-pkg: allow specifying the banner used in the boot loader config
269 on the command line (#114809)
270
271 * Tue Jan 13 2004 Jeremy Katz <katzj@redhat.com>
272 - mkinitrd: add patch from Alex Kiernan for modules with multiple
273 deps in 2.6 (#113306)
274
275 * Thu Jan 8 2004 Jeremy Katz <katzj@redhat.com> 3.5.18-1
276 - new-kernel-pkg: add a --kernel-arguments option (#113125)
277
278 * Tue Jan 6 2004 Jeremy Katz <katzj@redhat.com>
279 - fix ybin path (#112939)
280
281 * Sun Jan 4 2004 Jeremy Katz <katzj@redhat.com> 3.5.17-1
282 - mkinitrd: handle multiple spaces in modules.conf (from Lubomir Bulej)
283 - nash: rebuild against new dietlibc fixing problems with root=LABEL= (#112623)
284 - mkinitrd: determine kernel version and adjust modulefile appropriately
285 so that we look at /etc/modprobe.conf for 2.6 kernels
286 - mkinitrd: first pass at getting lvm working on 2.4 -> 2.6 upgrade
287
288 * Wed Dec 24 2003 Jeremy Katz <katzj@redhat.com>
289 - mkinitrd: quiet strip by default
290
291 * Mon Dec 22 2003 Jeremy Katz <katzj@redhat.com> 3.5.16.1-1
292 - make stripping less aggressive
293
294 * Mon Dec 22 2003 Jeremy Katz <katzj@redhat.com> 3.5.16-1
295 - fixing handling of non-lvm case when /dev/mapper/control isn't present
296 - add patch from Al Viro to get root dev in numeric form by grokking sysfs
297
298 * Tue Dec 9 2003 Jeremy Katz <katzj@redhat.com>
299 - strip modules if /usr/bin/strip exists (#111756)
300
301 * Fri Dec 5 2003 Jeremy Katz <katzj@redhat.com> 3.5.15-2
302 - require lvm2 so that it gets installed early enough
303
304 * Fri Dec 5 2003 Jeremy Katz <katzj@redhat.com> 3.5.15-1
305 - mkinitrd: add support for lvm2 (note: will not currently handle being
306 on a running 2.4 kernel and installing 2.6 with lvm rootfs)
307
308 * Wed Dec 3 2003 Jeremy Katz <katzj@redhat.com>
309 - nash: add mkdmnod for creating the device-mapper control node
310
311 * Thu Oct 2 2003 Jeremy Katz <katzj@redhat.com> 3.5.14-1
312 - fix dependency on /usr/bin/tail and /usr/bin/id
313
314 * Tue Sep 30 2003 Florian La Roche <Florian.LaRoche@redhat.de>
315 - remove one more mktemp dir for "all loopback devices in use" case
316
317 * Tue Sep 23 2003 Jeremy Katz <katzj@redhat.com> 3.5.13-1
318 - fix getting modules from /lib/modules/$(uname -r)/updates
319
320 * Mon Sep 22 2003 Jeremy Katz <katzj@redhat.com> 3.5.12-1
321 - argument checking and usage for /sbin/installkernel (#103109)
322
323 * Wed Sep 3 2003 Jeremy Katz <katzj@redhat.com> 3.5.11-1
324 - really only do grub configs on grub arches
325 - some usb mkinitrd fixes
326
327 * Fri Aug 29 2003 Jeremy Katz <katzj@redhat.com> 3.5.10-1
328 - clean up bogus warning in installkernel
329 - only try to do grub configs on arches which support grub (#103261)
330
331 * Thu Aug 7 2003 Matt Wilson <msw@redhat.com> 3.5.9-1
332 - add \n to error messages in grubby
333 - NUL terminate buffer returned from readlink properly
334 - symlinks are most likely relative, chdir to / before trying to
335 follow them
336 - yaboot needs boot prefix
337 - silo needs boot prefix too
338
339 * Wed Jul 30 2003 Jeremy Katz <katzj@redhat.com>
340 - grubby: don't segfault on label=\n (reported by dburcaw)
341
342 * Thu Jul 24 2003 Jeremy Katz <katzj@redhat.com>
343 - grubby: patch from zaitcev for uninitialized variable that can get
344 hit in the zipl case
345
346 * Mon Jul 21 2003 Jeremy Katz <katzj@redhat.com> 3.5.8-1
347 - bump initrd size (#99525)
348
349 * Wed Jul 9 2003 Jeremy Katz <katzj@redhat.com> 3.5.7-1
350 - pick modules from /lib/modules/$(uname -r)/updates first
351 - be less confused by more than one module of a name
352
353 * Wed Jun 25 2003 Jeremy Katz <katzj@redhat.com> 3.5.6-1
354 - unbreak reading module options from modules.conf again (#97982)
355
356 * Fri Jun 20 2003 Bill Nottingham <notting@redhat.com> 3.5.5-1
357 - fix modules.dep usage for 2.5/2.6
358
359 * Fri Jun 20 2003 Jeremy Katz <katzj@redhat.com> 3.5.4-1
360 - handle more bizarre modules.conf constructs (notting)
361
362 * Thu Jun 12 2003 Jeremy Katz <katzj@redhat.com> 3.5.3-1
363 - mkinitrd: fix copying of pvs (#97314, #97289)
364 - mkinitrd: use pvscan instead of lvmdiskscan to find PVs to work
365 better on other arches
366 - mkinitrd: better check for dasd existence
367 - mkinitrd: make certain lvm-mod is included if root on lvm
368
369 * Wed Jun 11 2003 Jeremy Katz <katzj@redhat.com> 3.5.2-1
370 - mkinitrd: revert use of modprobe -c. it breaks in the installer when we
371 don't have a modules.dep for the BOOT kernel
372 - nash: return pivot_root call correctly (#97753)
373
374 * Wed Jun 11 2003 Jeremy Katz <katzj@redhat.com> 3.5.1-1
375 - nash: fix syscall bits with gcc 3.3 on s390
376 - new-kernel-pkg: do depmod before mkinitrd (#97218)
377
378 * Tue Jun 10 2003 Jeremy Katz <katzj@redhat.com> 3.5.0-1
379 - mkinitrd: add patch from gc@mandrakesoft.com to determine module
380 deps from modules.dep (#87873)
381 - tweak patch to not break weird cases where module deps aren't all
382 you need :/
383 - grubby: don't remove the last kernel (#60041)
384 - mkinitrd: use modprobe -c to find module options (#89794)
385
386 * Tue May 20 2003 Matt Wilson <msw@redhat.com> 3.4.52-1
387 - use addSystemMap to build the image for iSeries (#91187)
388
389 * Fri May 16 2003 Jeremy Katz <katzj@redhat.com> 3.4.51-1
390 - grubby: error out gracefully if we run out of space (#85424)
391 - mkinitrd: copy parent dirs for pvs (#88962)
392 - mkinitrd: exit with an exit status if tar fails (#90123)
393 - new-kernel-pkg: only use the first entry for / (#90155)
394 - grubby: fix a buffer overflow (#90444)
395
396 * Wed Apr 30 2003 Jeremy Katz <katzj@redhat.com> 3.4.50-1
397 - fix typo in new-kernel-pkg for iSeries
398
399 * Wed Apr 30 2003 Elliot Lee <sopwith@redhat.com>
400 - BuildRequires: popt
401 - Change grubby Makefile to static-link popt a bit more cleanly
402
403 * Thu Apr 24 2003 Jeremy Katz <katzj@redhat.com> 3.4.49.1-1
404 - use Arjan's suggestion of vmlinitrd for the kernel + initrd combo file
405
406 * Thu Apr 24 2003 Jeremy Katz <katzj@redhat.com> 3.4.49-2
407 - fix description referencing /etc/conf.modules (#89558)
408
409 * Thu Apr 24 2003 Jeremy Katz <katzj@redhat.com> 3.4.49-2
410 - require ppc64-utils on ppc
411
412 * Fri Apr 18 2003 Jeremy Katz <katzj@redhat.com> 3.4.49-1
413 - new-kernel-pkg: on iSeries, we don't have a boot loader, just make the
414 kernel + initrd combo file (/boot/vmlinux-version.img)
415
416 * Mon Apr 07 2003 Karsten Hopp <karsten@redhat.com> 3.4.48-1
417 - Fix segfault on mainframe
418
419 * Wed Mar 26 2003 Jeremy Katz <katzj@redhat.com> 3.4.47-1
420 - mkinitrd: fix using options for loading modules
421 - mkinitrd: don't use kernel parameters for dasd at mkinitrd time,
422 use what's in modules.conf
423
424 * Mon Mar 24 2003 Jeremy Katz <katzj@redhat.com> 3.4.46-1
425 - new-kernel-pkg: add necessary bits for s390, some logic cleanups
426 - grubby: fix root detection for s390{,x}
427
428 * Sun Mar 23 2003 Jeremy Katz <katzj@redhat.com> 3.4.45-1
429 - grubby: add silo support (sparc)
430 - grubby: add zipl support (s390{,x})
431 - add grubby test cases for zipl support
432
433 * Wed Mar 19 2003 Jeremy Katz <katzj@redhat.com> 3.4.44.1-1
434 - fix dasd option reading
435
436 * Fri Mar 14 2003 Phil Knirsch <pknirsch@redhat.com> 3.4.44
437 - Added automatic dasd= parameters for kernel parameter on s390(x).
438
439 * Tue Mar 4 2003 Jeremy Katz <katzj@redhat.com> 3.4.43-1
440 - apply ppc patches for new-kernel-pkg and installkernel from Dan
441 Burcaw <dburcaw@terrasoftsolutions.com>
442 - man page tweak (#85471)
443
444 * Tue Feb 18 2003 Jeremy Katz <katzj@redhat.com> 3.4.42-1
445 - grubby: fix segfault from uninitialized variable (#84128)
446
447 * Tue Feb 11 2003 Jeremy Katz <katzj@redhat.com> 3.4.41-1
448 - nash: add readlink
449 - use readlink for rootdev to handle symlinks to root devs (#83391)
450
451 * Tue Feb 4 2003 Jeremy Katz <katzj@redhat.com> 3.4.40-1
452 - fix i2o module ordering (#83447)
453 - ifarch'd build requires of dietlibc now that the build system has a way to
454 handle these
455
456 * Sat Feb 01 2003 Florian La Roche <Florian.LaRoche@redhat.de>
457 - change one test from a number to a string test that could otherwise
458 fail in not properly setup chroot environments
459
460 * Fri Jan 31 2003 <ewt@redhat.com>
461 - added support for yaboot
462 - test script runs tests for all platforms
463 - separated elilo configuration from lilo mode, allowing elilo specific
464 tests to be run on any platform
465
466 * Sun Jan 26 2003 <ewt@redhat.com>
467 - grubby now shortens lilo titles to ensure they are less then 16 characters
468 long (76236)
469 - mkinitrd would only turn on /dev/md0 if raid was needed; now it enables
470 all raid devices listed in /proc/mdstat (82209)
471 - use product name from /etc/redhat-release to generate label in grub.conf
472 (82352)
473
474 * Mon Jan 20 2003 Bill Nottingham <notting@redhat.com> 3.4.36-1
475 - don't error out running awk on /proc/mdstat if /proc/mdstat isn't
476 there
477
478 * Tue Jan 14 2003 <ewt@redhat.com>
479 - all mkdev() actions will create directories as needed (some code in
480 mkdevices is now obsolete; I'll remove it later) (#73317)
481 - added mkdev command to test the above
482 - support diratime/nodiratime mount options (#78738)
483 - grubby will follow symlinks when writing new config file (#78713)
484 - don't depend on raidtab, use /proc/mdstat instead (#80424) this covers
485 both mkinitrd and grubby
486
487 * Sun Jan 5 2003 Jeremy Katz <katzj@redhat.com> 3.4.34-1
488 - grubby: fix segfault finding default if default doesn't have a root= (#66000)
489 - don't include usb modules by default. pass --with-usb to get usb modules
490 - make sure kudzu exists before trying to exec it
491 - handle multiple scsi hosts being present (#77422)
492 - add /usr/sbin to default path (#79581)
493 - fix using --builtin= (#80448)
494 - grubby: preserve the mode on config files (#80776)
495
496 * Mon Dec 16 2002 Jeremy Katz <katzj@redhat.com>
497 - errno fixes
498
499 * Tue Dec 03 2002 Florian La Roche <Florian.LaRoche@redhat.de>
500 - /sbin/new-kernel-pkg: fix a test to have correct ""
501
502 * Fri Nov 22 2002 Jeremy Katz <katzj@redhat.com>
503 - mkinitrd: more gzipped module fixes
504
505 * Thu Nov 21 2002 Jeremy Katz <katzj@redhat.com>
506 - mkinitrd: add support for finding gzipped modules
507 - mkinitrd: don't be noisy if we don't have lvm-mod loaded
508
509 * Wed Nov 6 2002 Jeremy Katz <katzj@redhat.com>
510 - grubby: don't bail when looking for root in appends of lilo-style configs
511 - include grubby on x86_64
512
513 * Thu Sep 26 2002 Nalin Dahyabhai <nalin@redhat.com>
514 - fix some syntax errors
515 - use grep's -q flag to save a redirect in places where we're not redirecting
516 stderr
517
518 * Thu Sep 5 2002 Jeremy Katz <katzj@redhat.com>
519 - grubby could segfault by going into its lilo checking if it couldn't find
520 a default to copy (default had no root= and --bad-image-okay wasn't
521 being used)
522
523 * Mon Sep 2 2002 Jeremy Katz <katzj@redhat.com>
524 - nash: create directories if needed in mkdevices command (#73090)
525 - grubby: handle lilo case of non-linux default (#72202)
526
527 * Sat Aug 31 2002 Jeremy Katz <katzj@redhat.com>
528 - grubby: fix for case like 'append = " hdc=ide-scsi "' (#68802)
529
530 * Fri Aug 30 2002 Bill Nottingham <notting@redhat.com>
531 - fix firewire stuff (#72916)
532
533 * Fri Aug 23 2002 Bill Nottingham <notting@redhat.com>
534 - fix mpt fusion stuff
535
536 * Tue Aug 13 2002 Jeremy Katz <katzj@redhat.com>
537 - /boot/efi/redhat -> /boot/efi/EFI/redhat on ia64
538
539 * Sun Aug 11 2002 Jeremy Katz <katzj@redhat.com>
540 - fix grubby to work correctly on ia64
541
542 * Thu Aug 08 2002 Michael Fulbright <msf@redhat.com>
543 - added sleep command to nash and fixed creating initrd with / or /boot on usb
544
545 * Tue Jul 30 2002 Jeremy Katz <katzj@redhat.com>
546 - grubby: adding kernels to lilo.conf when not using root=LABEL will work
547 now too
548
549 * Fri Jul 26 2002 Erik Troan <ewt@redhat.com>
550 - didn't close /proc/partitions in mkdevices
551
552 * Thu Jul 25 2002 Jeremy Katz <katzj@redhat.com>
553 - grubby: fix adding kernels to lilo when using root=LABEL
554
555 * Wed Jul 24 2002 Erik Troan <ewt@redhat.com>
556 - added and used mkdevices command (68959)
557
558 * Wed Jul 17 2002 Erik Troan <ewt@redhat.com>
559 - do proper probing to check root=LABEL
560 - --bootloader-probe didn't support /etc/sysconfig/grub
561
562 * Fri Jul 12 2002 Erik Troan <ewt@redhat.com>
563 - don't sanity check root=LABEL right now; probing might make sense?
564
565 * Wed Jul 10 2002 Erik Troan <ewt@redhat.com>
566 - --ifneeded is obsolete; we always need initrds
567 - grubby lets you specify multiple indexes for --info
568 - grubby lets you select kernels by title
569 - added showlabels to nash
570 - new-kernel-pkg sets the root device from /etc/fstab rather then inheriting it
571 - new-kernel-pkg removes all entries w/ a duplicate label (67459)
572
573 * Mon Jul 08 2002 Erik Troan <ewt@redhat.com>
574 - usb root device code could fail, causing no initrd to be made
575
576 * Thu Jun 27 2002 Erik Troan <ewt@redhat.com>
577 - grubby didn't add new kernels properly
578
579 * Thu Jun 27 2002 Erik Troan <ewt@redhat.com>
580 - support root on usb devices
581
582 * Wed Jun 26 2002 Erik Troan <ewt@redhat.com>
583 - other= in lilo.conf wasn't being parsed out properly
584
585 * Mon Jun 24 2002 Erik Troan <ewt@redhat.com>
586 - changed --add-kernel implementation so that --args gets handled properly
587
588 * Sun Jun 23 2002 Erik Troan <ewt@redhat.com>
589 - added loadinitrd (used by mkbootdisk) on ia32 and sparc
590 - modules "off" and "null" should be ignored (67086)
591 - mkrootdev looks for root=LABEL=/ in /proc/cmdline, so root by label
592 works again (fully determined by root= kernel parameter)
593 - added --update-kernel and --remove-args arguments to grubby
594 - kernel specification of ALL supported by grubby
595 - DEFAULT accepted much more consistently
596 - grubby --info displays info on all kernels specified, not just the first
597 - ext3 need mbcache now (67354)
598 - grubby allows config file entry numbers to be used as kernel paths
599 - support /etc/sysconfig/grub.conf
600 - display lba info from lilo.conf file in --info
601
602 * Thu Jun 13 2002 Jeremy Katz <katzj@redhat.com>
603 - don't run lilo twice on kernel removal in new-kernel-pkg
604 - don't run grubby to add/remove kernels from new-kernel-pkg if
605 bootloader config doesn't
606
607 * Tue Jun 11 2002 Erik Troan <ewt@redhat.com>
608 - added --bootloader-probe to grubby
609 - wrote a man page for grubby
610 - include grubby on ia64
611 - updated new-kernel-pkg to work with lilo/elilo
612 - added --info=DEFAULT option
613
614 * Mon Jun 10 2002 Jeremy Katz <katzj@redhat.com>
615 - start raid before lvm so that you can have root on lvm on raid (#66175)
616
617 * Tue Jun 04 2002 Erik Troan <ewt@redhat.com>
618 - failed to initialize a variable in grubby
619
620 * Fri May 31 2002 Erik Troan <ewt@redhat.com>
621 - added --grub option so grub tests could run on ia64
622 - added some basic tests of lilo default directive handling
623
624 * Wed May 29 2002 Jeremy Katz <katzj@redhat.com>
625 - require lvm
626
627 * Tue May 28 2002 Bill Nottingham <notting@redhat.com>
628 - fix umounting of /initrd when pivoting
629
630 * Tue May 28 2002 Erik Troan <ewt@redhat.com>
631 - marked /sbin/installkernel as %config (53006)
632 - run make test during build
633
634 * Wed May 22 2002 Erik Troan <ewt@redhat.com>
635 - added --nopivot (53679)
636 - honor INSTALL_PATH in installkernel (32833)
637 - installkernel versions old kernels as well (52756)
638 - lilo support added to grubby
639
640 * Tue May 21 2002 Erik Troan <ewt@redhat.com>
641 - cleaned up usage message
642 - added --omit-lvm-modules to man page
643 - added --builtin option (65250)
644 - skip comments in fstab (65249)
645 - added findlodev to nash, use that to pick block device (63421)
646 - support -o option in nash's mount (59185)
647 - look for xfs_dmapi (60066)
648 - added > support for executed commands (61180)
649 - grubby copies permissions from old config file (59227)
650 - use options from fstab for root filesystem (56071)
651 - try and be better about returning nonzero on error (60203)
652 - make modprobe symlink properly to avoid kernel message (62145)
653 - support linear raid (12775)
654 - support fallback option in grub config (54794)
655 - comments in template entries not handled quite right (65198)
656
657 * Sat Apr 20 2002 Erik Troan <ewt@redhat.com>
658 - grubby does a better job of not adding superfluous default= lines
659
660 * Wed Apr 17 2002 Erik Troan <ewt@redhat.com>
661 - preload works again
662
663 * Wed Apr 10 2002 Jeremy Katz <katzj@redhat.com>
664 - revert to not mounting by label
665
666 * Fri Apr 5 2002 Jeremy Katz <katzj@redhat.com>
667 - include pbrown's changes to load parport_pc when needing ppa.o (#35360)
668
669 * Thu Apr 4 2002 Jeremy Katz <katzj@redhat.com>
670 - fix redirection bug (#62623)
671 - create proper link of /sbin->/bin in initrd (#62199)
672
673 * Thu Mar 28 2002 Jeremy Katz <katzj@redhat.com>
674 - prereq dev package so that we always have the dev package before we get run
675
676 * Fri Mar 22 2002 Jeremy Katz <katzj@redhat.com>
677 - duh, that won't work. fix it
678 - don't require lvm tools right now
679
680 * Thu Mar 21 2002 Jeremy Katz <katzj@redhat.com>
681 - fix nash to create directories for devices like cciss and ida
682
683 * Tue Feb 5 2002 Bill Nottingham <notting@redhat.com>
684 - run mkinitrd with -f in new-kernel-pkg
685 - don't run lilo in /sbin/installkernel
686
687 * Fri Feb 1 2002 Jeremy Katz <katzj@redhat.com>
688 - require lvm
689
690 * Thu Jan 31 2002 Jeremy Katz <katzj@redhat.com>
691 - clean up warnings for when /proc isn't mounted
692
693 * Tue Jan 29 2002 Jeremy Katz <katzj@redhat.com>
694 - fix probing for LVM usage to require a volume group to exist before adding
695 the module
696 - --omit-lvm-modules will omit LVM modules
697 - add support for root device being LVM
698
699 * Wed Jan 16 2002 Erik Troan <ewt@redhat.com>
700 - look for a non /tmpfs directory
701 - added support for xfs
702 - use with raid md.o if it exists
703 - fixed bug in echo
704 - use find form nash rather then /usr (mkinitrd shouldn't need /usr
705 mounted)
706
707 * Fri Jan 11 2002 Erik Troan <ewt@redhat.com>
708 - added support for mounting root filesystem by label
709 - switched to dietlibc from minilibc
710 - fix so --preload= works [33675,57560,44377]
711 - added info on --image-version and --nocompress to man page [57560]
712 - set fileystem check interval to 0 in case the system clock
713 is borked [51454]
714 - give a proper error when run by a user other then root [27218,53159]
715 - grubby statically linked against popt [55305]
716 - cleaned up verbose output a bit [21791]
717
718 * Tue Dec 18 2001 Trond Eivind Glomsrød <teg@redhat.com>
719 - Add LVM module when LVM is used
720
721 * Wed Sep 5 2001 Jeremy Katz <katzj@redhat.com>
722 - grubby shouldn't blow away default=saved lines (#52981)
723
724 * Fri Aug 31 2001 Jeremy Katz <katzj@redhat.com>
725 - fix new-kernel-pkg --mkinitrd for ia64
726
727 * Thu Aug 30 2001 Erik Troan <ewt@redhat.com>
728 - fixed bug handling invalid default (MF #52889)
729 - in some cases we would set the default to point at a removed image
730
731 * Wed Aug 29 2001 Erik Troan <ewt@redhat.com>
732 - minor grubby fixes
733
734 * Tue Aug 28 2001 Jeremy Katz <katzj@redhat.com>
735 - let new-kernel-pkg be able to do more (initrds, modules.*)
736 - include grubby only on x86
737
738 * Mon Aug 27 2001 Jeremy Katz <katzj@redhat.com>
739 - more grubby fixups for having a /boot
740 - added new-kernel-pkg
741
742 * Sun Aug 26 2001 Erik Troan <ewt@redhat.com>
743 - added grubby
744 - added installkernel
745
746 * Fri Aug 3 2001 Matt Wilson <msw@redhat.com>
747 - make consoles with the correct minor numbers
748 - applied patch from hjl to fix fstab parsing (#50819)
749
750 * Fri Jul 20 2001 Jeremy Katz <katzj@redhat.com>
751 - skip errors finding jbd as a module if we're skipping them trying to find
752 ext3 so that you can build a kernel with ext3 built-in and still use an
753 initrd
754
755 * Wed Jul 11 2001 Bill Nottingham <notting@redhat.com>
756 - don't print errors if /etc/raidtab doesn't exist
757 - or /etc/{modules.conf,conf.modules}, for that matter
758
759 * Fri Jul 6 2001 Matt Wilson <msw@redhat.com>
760 - don't dig through /etc/fstab to find out if we have a filesystem on
761 a RAID device, it's usually mounted by label so /dev/mdN isn't there
762 at all (#46525)
763
764 * Tue Jun 26 2001 Bill Nottingham <notting@redhat.com>
765 - require filesystem >= 2.1.0, otherwise we don't boot
766
767 * Thu Jun 21 2001 Erik Troan <ewt@redhat.com>
768 - added a bunch of commands to nash
769 - use pivot_root
770 - support ext3
771
772 * Fri Jun 08 2001 Florian La Roche <Florian.LaRoche@redhat.de>
773 - delete the exclusivearch line completely
774
775 * Fri Mar 23 2001 Matt Wilson <msw@redhat.com>
776 - reset the state of findmodule after getting the modules we need
777
778 * Wed Feb 28 2001 Matt Wilson <msw@redhat.com>
779 - changed the Requires on mktemp from >= 1.5 to >= 1.5-5 (which included
780 -d support) (#30127)
781
782 * Fri Feb 23 2001 Erik Troan <ewt@redhat.com>
783 - let nash be invoked as modprobe to avoid a modprobe failure to exec
784 - nash will try to run arbitrary commands now (removing insmod as a special
785 case)
786
787 * Mon Feb 12 2001 Matt Wilson <msw@redhat.com>
788 - add findutils to Requires line (#27269)
789
790 * Thu Feb 8 2001 Matt Wilson <msw@redhat.com>
791 - added checks to load the modules i2o_block needs
792
793 * Wed Feb 7 2001 Bill Nottingham <notting@redhat.com>
794 - fix utterly broken build
795
796 * Wed Jan 31 2001 Helge Deller <hdeller@redhat.com>
797 - added mandir to nash Makefile (RH 6.x compatibility)
798
799 * Tue Jan 30 2001 Erik Troan <ewt@redhat.com>
800 - added dependency on mktemp
801
802 * Thu Jan 25 2001 Erik Troan <ewt@redhat.com>
803 - we need to insert xor.o before raid5.o
804
805 * Wed Jan 24 2001 Matt Wilson <msw@redhat.com>
806 - code in RAID_AUTORUN ioctl fallback
807 - fixed raidstart check flag from -z to -n
808
809 * Tue Jan 23 2001 Erik Troan <ewt@redhat.com>
810 - switched to using nash from sash
811
812 * Tue Jan 23 2001 Matt Wilson <msw@redhat.com>
813 - added patch from twaugh to avoid blindly adding scsi_mod
814 and sd_mod to initrd if they are not needed (#24114)
815
816 * Thu Jan 11 2001 Bernhard Rosenkraenzer <bero@redhat.com>
817 - Enlarge initrds, needed for systems with both IDE and SCSI
818 (Bug #23846)
819 - Version 2.[6789] probably shouldn't identify itself as 2.6
820 with --version. ;)
821 - bzip2 source
822
823 * Wed Dec 20 2000 Erik Troan <ewt@redhat.com>
824 - let the kernel autoload ide-cd
825
826 * Fri Dec 08 2000 Erik Troan <ewt@redhat.com>
827 - added modular ide support
828
829 * Wed Aug 30 2000 Nalin Dahyabhai <nalin@redhat.com>
830 - use mktemp to create temporary files and directories
831
832 * Sat Aug 05 2000 Erik Troan <ewt@redhat.com>
833 - changes from Keith Owens for 2.4
834
835 * Tue Jul 4 2000 Matt Wilson <msw@redhat.com>
836 - build on alpha
837
838 * Mon Jun 26 2000 Bill Nottingham <notting@redhat.com>
839 - ignore 'unknown' aliases (they shouldn't be there anyways)
840
841 * Thu Jun 1 2000 Bill Nottingham <notting@redhat.com>
842 - build on ia64
843 - bump up initrd size on ia64
844 - modules.confiscation, /usr/man -> /usr/share/man
845
846 * Tue May 2 2000 Nalin Dahyabhai <nalin@redhat.com>
847 - make RPM pick up man page, regardless of compression
848
849 * Tue Feb 29 2000 Matt Wilson <msw@redhat.com>
850 - add requirement for /sbin/losetup
851
852 * Mon Feb 7 2000 Matt Wilson <msw@redhat.com>
853 - gzip manpage
854
855 * Thu Feb 3 2000 Matt Wilson <msw@redhat.com>
856 - gzip manpage
857
858 * Mon Jan 10 2000 Erik Troan <ewt@redhat.com>
859 - use sash, not ash
860
861 * Mon Jan 3 2000 Matt Wilson <msw@redhat.com>
862 - use ash.static for /bin/sh, not sash
863
864 * Sat Jan 1 2000 Erik Troan <ewt@redhat.com>
865 - configure loopback devices
866
867 * Tue Sep 28 1999 Bill Nottingham <notting@redhat.com>
868 - sparc fixup from jakub
869
870 * Wed Sep 22 1999 Michael K. Johnson <johnsonm@redhat.com>
871 - fix cleanup (blush!)
872
873 * Tue Sep 21 1999 Michael K. Johnson <johnsonm@redhat.com>
874 - now works when /usr is not mounted (do not rely on /usr/bin/install)
875 - slight cleanups, better usage message
876
877 * Thu Jul 29 1999 Michael K. Johnson <johnsonm@redhat.com>
878 - Now automatically includes necessary raid modules
879 - --omit-raid-modules now omits raid modules
880 - tiny doc updates
881
882 * Thu Jul 29 1999 Bill Nottingham <notting@redhat.com>
883 - updates from bugzila (#4243, #4244)
884
885 * Sat Mar 27 1999 Matt Wilson <msw@redhat.com>
886 - --omit-scsi-modules now omits all scsi modules
887 - updated documentation
888 - mkinitrd now grabs scsi_hostadapter modules from anywhere -
889 some RAID controller modules live in block/
890
891 * Thu Feb 25 1999 Matt Wilson <msw@redhat.com>
892 - updated description
893
894 * Mon Jan 11 1999 Matt Wilson <msw@redhat.com>
895 - Ignore the absence of scsi modules, include them if they are there, but
896 don't complain if they are not.
897 - changed --no-scsi-modules to --omit-scsi-modules (as it should have been)
898
899 * Thu Nov 5 1998 Jeff Johnson <jbj@redhat.com>
900 - import from ultrapenguin 1.1.
901
902 * Tue Oct 20 1998 Jakub Jelinek <jj@ultra.linux.cz>
903 - fix for combined sparc/sparc64 insmod, also pluto module is really
904 fc4:soc:pluto and we don't look at deps, so special case it.
905
906 * Sat Aug 29 1998 Erik Troan <ewt@redhat.com>
907 - replaced --needs-scsi-mods (which is now the default) with
908 --omit-scsi-mods
909
910 * Fri Aug 7 1998 Jeff Johnson <jbj@redhat.com>
911 - correct obscure regex/shell interaction (hardwires tabs on line 232)
912
913 * Mon Jan 12 1998 Erik Troan <ewt@redhat.com>
914 - added 'make archive' rule to Makefile
915 - rewrote install procedure for more robust version handling
916 - be smarter about grabbing options from /etc/conf.modules
917
918 * Mon Oct 20 1997 Erik Troan <ewt@redhat.com>
919 - made it use /bin/ash.static
920
921 * Wed Apr 16 1997 Erik Troan <ewt@redhat.com>
922 - Only use '-s' to install binaries if /usr/bin/strip is present.
923 - Use an image size of 2500 if binaries can't be stripped (1500 otherwise)
924 - Don't use "mount -o loop" anymore -- losetup the proper devices manually
925 - Requires losetup, e2fsprogs
926
927 * Wed Mar 12 1997 Michael K. Johnson <johnsonm@redhat.com>
928 - Fixed a bug in parsing options.
929 - Changed to use a build tree, then copy the finished tree into the
930 image after it is built.
931 - Added patches derived from ones written by Christian Hechelmann which
932 add an option to put the kernel version number at the end of the module
933 name and use install -s to strip binaries on the fly.

admin@koozali.org
ViewVC Help
Powered by ViewVC 1.2.1 RSS 2.0 feed