perl-Log-Agent/sme7/Log-Agent.spec

#
#   - Log::Agent -
#   This spec file was automatically generated by cpan2rpm [ver: 2.022]
#   The following arguments were used:
#       --distribution=BEA --packager=Bent Terp <Bent.Terp@bea.ki.se> --url=http://www.bea.ki.se --no-upgrade-chk --force --spec-only Log::Agent
#   For more information on cpan2rpm please visit: http://perl.arix.com/
#

%define pkgname Log-Agent
%define filelist %{pkgname}-%{version}-filelist
%define NVR %{pkgname}-%{version}-%{release}
%define maketest 1

name:      perl-Log-Agent
summary:   Log-Agent - logging agent
version:   0.305
Release:   2%{?dist}
license:   Artistic
group:     Applications/CPAN
url:       http://www.bea.ki.se
buildroot: %{_tmppath}/%{name}-%{version}-%(id -u -n)
prefix:    %(echo %{_prefix})
source:    http://search.cpan.org//CPAN/authors/id/M/MR/MROGASKI/Log-Agent-0.305.tar.gz

%description
The C<Log::Agent> module provides an abstract layer for logging and
tracing, which is independant from the actual method used to physically
perform those activities. It acts as an agent (hence the name) that
collects the requests and delegates processing to a sublayer: the
logging driver.

The C<Log::Agent> module is meant to be used in all reusable components,
since they cannot know in advance how the application which ends up using
them will perform its logging activities: either by emitting messages
on stdout and errors on stderr, or by directing messages to logfiles,
or by using syslog(3).

The logging interface is common for all the logging drivers, and is
therefore the result of a compromise between many logging schemes: any
information given at this level must be either handled by all drivers,
or may be ignored depending on the application's final choice.

WARNING: THIS INTERFACE IS STILL SOMEWHAT ALPHA AND COULD STILL CHANGE
DEPENDING ON THE FEEDBACK I SHALL GET FROM USERS AND FROM MY OWN
EXPERIENCE USING IT, WITHOUT ANY BACKWARD COMPATIBILITY ASSURANCE.

#
# This package was generated automatically with the cpan2rpm
# utility.  To get this software or for more information
# please visit: http://perl.arix.com/
#

%prep
%setup -q -n %{pkgname}-%{version} 
chmod -R u+w %{_builddir}/%{pkgname}-%{version}

%build
grep -rsl '^#!.*perl' . |
grep -v '.bak$' |xargs --no-run-if-empty \
%__perl -MExtUtils::MakeMaker -e 'MY->fixin(@ARGV)'
CFLAGS="$RPM_OPT_FLAGS"
%{__perl} Makefile.PL `%{__perl} -MExtUtils::MakeMaker -e ' print qq|PREFIX=%{buildroot}%{_prefix}| if \$ExtUtils::MakeMaker::VERSION =~ /5\.9[1-6]|6\.0[0-5]/ '`
%{__make} 
%if %maketest
%{__make} test
%endif

%install
[ "%{buildroot}" != "/" ] && rm -rf %{buildroot}

%{makeinstall} `%{__perl} -MExtUtils::MakeMaker -e ' print \$ExtUtils::MakeMaker::VERSION <= 6.05 ? qq|PREFIX=%{buildroot}%{_prefix}| : qq|DESTDIR=%{buildroot}| '`

[ -x /usr/lib/rpm/brp-compress ] && /usr/lib/rpm/brp-compress

# SuSE Linux
if [ -e /etc/SuSE-release -o -e /etc/UnitedLinux-release ]
then
    %{__mkdir_p} %{buildroot}/var/adm/perl-modules
    %{__cat} `find %{buildroot} -name "perllocal.pod"`  \
        | %{__sed} -e s+%{buildroot}++g                 \
        > %{buildroot}/var/adm/perl-modules/%{name}
fi

# remove special files
find %{buildroot} -name "perllocal.pod" \
    -o -name ".packlist"                \
    -o -name "*.bs"                     \
    |xargs -i rm -f {}

# no empty directories
find %{buildroot}%{_prefix}             \
    -type d -depth                      \
    -exec rmdir {} \; 2>/dev/null

%{__perl} -MFile::Find -le '
    find({ wanted => \&wanted, no_chdir => 1}, "%{buildroot}");
    print "%doc  Agent README";
    for my $x (sort @dirs, @files) {
        push @ret, $x unless indirs($x);
        }
    print join "\n", sort @ret;

    sub wanted {
        return if /auto$/;

        local $_ = $File::Find::name;
        my $f = $_; s|^%{buildroot}||;
        return unless length;
        return $files[@files] = $_ if -f $f;

        $d = $_;
        /\Q$d\E/ && return for reverse sort @INC;
        $d =~ /\Q$_\E/ && return
            for qw|/etc %_prefix/man %_prefix/bin %_prefix/share|;

        $dirs[@dirs] = $_;
        }

    sub indirs {
        my $x = shift;
        $x =~ /^\Q$_\E\// && $x ne $_ && return 1 for @dirs;
        }
    ' > %filelist

[ -z %filelist ] && {
    echo "ERROR: empty %files listing"
    exit -1
    }

%clean
[ "%{buildroot}" != "/" ] && rm -rf %{buildroot}

%files -f %filelist
%defattr(-,root,root)

%changelog
* Sun Apr 29 2007 Shad L. Lords <slords@mail.com>
- Clean up spec so package can be built by koji/plague

* Sun Apr 29 2007 Shad L. Lords <slords@mail.com> 0.51.5-9
- Change to dist for tagging release
- Fix to be able to build on 64-bit


* Sun Dec 10 2006 <greg@runlevel7.ca>
- Update release and packager

* Wed Jan 21 2004 bent@mata.biosci.ki.se
- Initial build.
1	slords	1.1	#
2			# - Log::Agent -
3			# This spec file was automatically generated by cpan2rpm [ver: 2.022]
4			# The following arguments were used:
5			# --distribution=BEA --packager=Bent Terp <Bent.Terp@bea.ki.se> --url=http://www.bea.ki.se --no-upgrade-chk --force --spec-only Log::Agent
6			# For more information on cpan2rpm please visit: http://perl.arix.com/
7			#
8
9			%define pkgname Log-Agent
10			%define filelist %{pkgname}-%{version}-filelist
11			%define NVR %{pkgname}-%{version}-%{release}
12			%define maketest 1
13
14			name: perl-Log-Agent
15			summary: Log-Agent - logging agent
16			version: 0.305
17			Release: 2%{?dist}
18			license: Artistic
19			group: Applications/CPAN
20			url: http://www.bea.ki.se
21			buildroot: %{_tmppath}/%{name}-%{version}-%(id -u -n)
22			prefix: %(echo %{_prefix})
23			source: http://search.cpan.org//CPAN/authors/id/M/MR/MROGASKI/Log-Agent-0.305.tar.gz
24
25			%description
26			The C<Log::Agent> module provides an abstract layer for logging and
27			tracing, which is independant from the actual method used to physically
28			perform those activities. It acts as an agent (hence the name) that
29			collects the requests and delegates processing to a sublayer: the
30			logging driver.
31
32			The C<Log::Agent> module is meant to be used in all reusable components,
33			since they cannot know in advance how the application which ends up using
34			them will perform its logging activities: either by emitting messages
35			on stdout and errors on stderr, or by directing messages to logfiles,
36			or by using syslog(3).
37
38			The logging interface is common for all the logging drivers, and is
39			therefore the result of a compromise between many logging schemes: any
40			information given at this level must be either handled by all drivers,
41			or may be ignored depending on the application's final choice.
42
43			WARNING: THIS INTERFACE IS STILL SOMEWHAT ALPHA AND COULD STILL CHANGE
44			DEPENDING ON THE FEEDBACK I SHALL GET FROM USERS AND FROM MY OWN
45			EXPERIENCE USING IT, WITHOUT ANY BACKWARD COMPATIBILITY ASSURANCE.
46
47			#
48			# This package was generated automatically with the cpan2rpm
49			# utility. To get this software or for more information
50			# please visit: http://perl.arix.com/
51			#
52
53			%prep
54			%setup -q -n %{pkgname}-%{version}
55			chmod -R u+w %{_builddir}/%{pkgname}-%{version}
56
57			%build
58			grep -rsl '^#!.*perl' . \|
59			grep -v '.bak$' \|xargs --no-run-if-empty \
60			%__perl -MExtUtils::MakeMaker -e 'MY->fixin(@ARGV)'
61			CFLAGS="$RPM_OPT_FLAGS"
62			%{__perl} Makefile.PL `%{__perl} -MExtUtils::MakeMaker -e ' print qq\|PREFIX=%{buildroot}%{_prefix}\| if \$ExtUtils::MakeMaker::VERSION =~ /5\.9[1-6]\|6\.0[0-5]/ '`
63			%{__make}
64			%if %maketest
65			%{__make} test
66			%endif
67
68			%install
69			[ "%{buildroot}" != "/" ] && rm -rf %{buildroot}
70
71			%{makeinstall} `%{__perl} -MExtUtils::MakeMaker -e ' print \$ExtUtils::MakeMaker::VERSION <= 6.05 ? qq\|PREFIX=%{buildroot}%{_prefix}\| : qq\|DESTDIR=%{buildroot}\| '`
72
73			[ -x /usr/lib/rpm/brp-compress ] && /usr/lib/rpm/brp-compress
74
75			# SuSE Linux
76			if [ -e /etc/SuSE-release -o -e /etc/UnitedLinux-release ]
77			then
78			%{__mkdir_p} %{buildroot}/var/adm/perl-modules
79			%{__cat} `find %{buildroot} -name "perllocal.pod"` \
80			\| %{__sed} -e s+%{buildroot}++g \
81			> %{buildroot}/var/adm/perl-modules/%{name}
82			fi
83
84			# remove special files
85			find %{buildroot} -name "perllocal.pod" \
86			-o -name ".packlist" \
87			-o -name "*.bs" \
88			\|xargs -i rm -f {}
89
90			# no empty directories
91			find %{buildroot}%{_prefix} \
92			-type d -depth \
93			-exec rmdir {} \; 2>/dev/null
94
95			%{__perl} -MFile::Find -le '
96			find({ wanted => \&wanted, no_chdir => 1}, "%{buildroot}");
97			print "%doc Agent README";
98			for my $x (sort @dirs, @files) {
99			push @ret, $x unless indirs($x);
100			}
101			print join "\n", sort @ret;
102
103			sub wanted {
104			return if /auto$/;
105
106			local $_ = $File::Find::name;
107			my $f = $_; s\|^%{buildroot}\|\|;
108			return unless length;
109			return $files[@files] = $_ if -f $f;
110
111			$d = $_;
112			/\Q$d\E/ && return for reverse sort @INC;
113			$d =~ /\Q$_\E/ && return
114			for qw\|/etc %_prefix/man %_prefix/bin %_prefix/share\|;
115
116			$dirs[@dirs] = $_;
117			}
118
119			sub indirs {
120			my $x = shift;
121			$x =~ /^\Q$_\E\// && $x ne $_ && return 1 for @dirs;
122			}
123			' > %filelist
124
125			[ -z %filelist ] && {
126			echo "ERROR: empty %files listing"
127			exit -1
128			}
129
130			%clean
131			[ "%{buildroot}" != "/" ] && rm -rf %{buildroot}
132
133			%files -f %filelist
134			%defattr(-,root,root)
135
136			%changelog
137			* Sun Apr 29 2007 Shad L. Lords <slords@mail.com>
138			- Clean up spec so package can be built by koji/plague
139
140			* Sun Apr 29 2007 Shad L. Lords <slords@mail.com> 0.51.5-9
141			- Change to dist for tagging release
142			- Fix to be able to build on 64-bit
143
144
145			* Sun Dec 10 2006 <greg@runlevel7.ca>
146			- Update release and packager
147
148			* Wed Jan 21 2004 bent@mata.biosci.ki.se
149			- Initial build.