1 |
slords |
1.1 |
--- ppp-2.3.3/sample/auth-down.sample Tue Jan 6 17:53:27 1998 |
2 |
|
|
+++ ppp-2.3.3/sample/auth-down Tue Jan 6 17:53:27 1998 |
3 |
|
|
@@ -0,0 +1,17 @@ |
4 |
|
|
+#!/bin/sh |
5 |
|
|
+# |
6 |
|
|
+# A program or script which is executed after the remote system |
7 |
|
|
+# successfully authenticates itself. It is executed with the parameters |
8 |
|
|
+# <interface-name> <peer-name> <user-name> <tty-device> <speed> |
9 |
|
|
+# |
10 |
|
|
+ |
11 |
|
|
+# |
12 |
|
|
+# The environment is cleared before executing this script |
13 |
|
|
+# so the path must be reset |
14 |
|
|
+# |
15 |
|
|
+PATH=/usr/sbin:/sbin:/usr/bin:/bin |
16 |
|
|
+export PATH |
17 |
|
|
+ |
18 |
|
|
+echo auth-down `date +'%y/%m/%d %T'` $* >> /var/log/pppstats |
19 |
|
|
+ |
20 |
|
|
+# last line |
21 |
|
|
--- ppp-2.3.3/sample/auth-up.sample Tue Jan 6 17:53:27 1998 |
22 |
|
|
+++ ppp-2.3.3/sample/auth-up Tue Jan 6 17:53:27 1998 |
23 |
|
|
@@ -0,0 +1,17 @@ |
24 |
|
|
+#!/bin/sh |
25 |
|
|
+# |
26 |
|
|
+# A program or script which is executed after the remote system |
27 |
|
|
+# successfully authenticates itself. It is executed with the parameters |
28 |
|
|
+# <interface-name> <peer-name> <user-name> <tty-device> <speed> |
29 |
|
|
+# |
30 |
|
|
+ |
31 |
|
|
+# |
32 |
|
|
+# The environment is cleared before executing this script |
33 |
|
|
+# so the path must be reset |
34 |
|
|
+# |
35 |
|
|
+PATH=/usr/sbin:/sbin:/usr/bin:/bin |
36 |
|
|
+export PATH |
37 |
|
|
+ |
38 |
|
|
+echo auth-up `date +'%y/%m/%d %T'` $* >> /var/log/pppstats |
39 |
|
|
+ |
40 |
|
|
+# last line |
41 |
|
|
--- ppp-2.3.3/sample/ip-down.sample Tue Jan 6 17:53:27 1998 |
42 |
|
|
+++ ppp-2.3.3/sample/ip-down Tue Jan 6 17:53:27 1998 |
43 |
|
|
@@ -0,0 +1,22 @@ |
44 |
|
|
+#!/bin/sh |
45 |
|
|
+# |
46 |
|
|
+# This script is run by the pppd _after_ the link is brought down. |
47 |
|
|
+# It should be used to delete routes, unset IP addresses etc. |
48 |
|
|
+# |
49 |
|
|
+# This script is called with the following arguments: |
50 |
|
|
+# Arg Name Example |
51 |
|
|
+# $1 Interface name ppp0 |
52 |
|
|
+# $2 The tty ttyS1 |
53 |
|
|
+# $3 The link speed 38400 |
54 |
|
|
+# $4 Local IP number 12.34.56.78 |
55 |
|
|
+# $5 Peer IP number 12.34.56.99 |
56 |
|
|
+# |
57 |
|
|
+ |
58 |
|
|
+# |
59 |
|
|
+# The environment is cleared before executing this script |
60 |
|
|
+# so the path must be reset |
61 |
|
|
+# |
62 |
|
|
+PATH=/usr/sbin:/sbin:/usr/bin:/bin |
63 |
|
|
+export PATH |
64 |
|
|
+ |
65 |
|
|
+# last line |
66 |
|
|
--- ppp-2.3.3/sample/ip-up.sample Tue Jan 6 17:53:27 1998 |
67 |
|
|
+++ ppp-2.3.3/sample/ip-up Tue Jan 6 17:53:27 1998 |
68 |
|
|
@@ -0,0 +1,23 @@ |
69 |
|
|
+#!/bin/sh |
70 |
|
|
+# |
71 |
|
|
+# This script is run by the pppd after the link is established. |
72 |
|
|
+# It should be used to add routes, set IP address, run the mailq |
73 |
|
|
+# etc. |
74 |
|
|
+# |
75 |
|
|
+# This script is called with the following arguments: |
76 |
|
|
+# Arg Name Example |
77 |
|
|
+# $1 Interface name ppp0 |
78 |
|
|
+# $2 The tty ttyS1 |
79 |
|
|
+# $3 The link speed 38400 |
80 |
|
|
+# $4 Local IP number 12.34.56.78 |
81 |
|
|
+# $5 Peer IP number 12.34.56.99 |
82 |
|
|
+# |
83 |
|
|
+ |
84 |
|
|
+# |
85 |
|
|
+# The environment is cleared before executing this script |
86 |
|
|
+# so the path must be reset |
87 |
|
|
+# |
88 |
|
|
+PATH=/usr/sbin:/sbin:/usr/bin:/bin |
89 |
|
|
+export PATH |
90 |
|
|
+ |
91 |
|
|
+# last line |
92 |
|
|
--- ppp-2.3.3/sample/options.sample Tue Jan 6 17:53:27 1998 |
93 |
|
|
+++ ppp-2.3.3/sample/options Tue Jan 6 17:53:27 1998 |
94 |
|
|
@@ -0,0 +1,153 @@ |
95 |
|
|
+# /etc/ppp/options |
96 |
|
|
+ |
97 |
|
|
+# The name of this server. Often, the FQDN is used here. |
98 |
|
|
+#name <host> |
99 |
|
|
+ |
100 |
|
|
+# Enforce the use of the hostname as the name of the local system for |
101 |
|
|
+# authentication purposes (overrides the name option). |
102 |
|
|
+usehostname |
103 |
|
|
+ |
104 |
|
|
+# If no local IP address is given, pppd will use the first IP address |
105 |
|
|
+# that belongs to the local hostname. If "noipdefault" is given, this |
106 |
|
|
+# is disabled and the peer will have to supply an IP address. |
107 |
|
|
+noipdefault |
108 |
|
|
+ |
109 |
|
|
+# With this option, pppd will accept the peer's idea of our local IP |
110 |
|
|
+# address, even if the local IP address was specified in an option. |
111 |
|
|
+#ipcp-accept-local |
112 |
|
|
+ |
113 |
|
|
+# With this option, pppd will accept the peer's idea of its (remote) IP |
114 |
|
|
+# address, even if the remote IP address was specified in an option. |
115 |
|
|
+#ipcp-accept-remote |
116 |
|
|
+ |
117 |
|
|
+# Specify which DNS Servers the incoming Win95 or WinNT Connection should use |
118 |
|
|
+# Two Servers can be remotely configured |
119 |
|
|
+#ms-dns 192.168.1.1 |
120 |
|
|
+#ms-dns 192.168.1.2 |
121 |
|
|
+ |
122 |
|
|
+# Specify which WINS Servers the incoming connection Win95 or WinNT should use |
123 |
|
|
+#wins-addr 192.168.1.50 |
124 |
|
|
+#wins-addr 192.168.1.51 |
125 |
|
|
+ |
126 |
|
|
+# enable this on a server that already has a permanent default route |
127 |
|
|
+#nodefaultroute |
128 |
|
|
+ |
129 |
|
|
+# Run the executable or shell command specified after pppd has terminated |
130 |
|
|
+# the link. This script could, for example, issue commands to the modem |
131 |
|
|
+# to cause it to hang up if hardware modem control signals were not |
132 |
|
|
+# available. |
133 |
|
|
+# If mgetty is running, it will reset the modem anyway. So there is no need |
134 |
|
|
+# to do it here. |
135 |
|
|
+#disconnect "chat -- \d+++\d\c OK ath0 OK" |
136 |
|
|
+ |
137 |
|
|
+# Increase debugging level (same as -d). The debug output is written |
138 |
|
|
+# to syslog LOG_LOCAL2. |
139 |
|
|
+debug |
140 |
|
|
+ |
141 |
|
|
+# Enable debugging code in the kernel-level PPP driver. The argument n |
142 |
|
|
+# is a number which is the sum of the following values: 1 to enable |
143 |
|
|
+# general debug messages, 2 to request that the contents of received |
144 |
|
|
+# packets be printed, and 4 to request that the contents of transmitted |
145 |
|
|
+# packets be printed. |
146 |
|
|
+#kdebug n |
147 |
|
|
+ |
148 |
|
|
+# Require the peer to authenticate itself before allowing network |
149 |
|
|
+# packets to be sent or received. |
150 |
|
|
+# Please do not disable this setting. It is expected to be standard in |
151 |
|
|
+# future releases of pppd. Use the call option (see manpage) to disable |
152 |
|
|
+# authentication for specific peers. |
153 |
|
|
+#auth |
154 |
|
|
+ |
155 |
|
|
+# authentication can either be pap or chap. As most people only want to |
156 |
|
|
+# use pap, you can also disable chap: |
157 |
|
|
+#require-pap |
158 |
|
|
+#refuse-chap |
159 |
|
|
+ |
160 |
|
|
+# Use hardware flow control (i.e. RTS/CTS) to control the flow of data |
161 |
|
|
+# on the serial port. |
162 |
|
|
+crtscts |
163 |
|
|
+ |
164 |
|
|
+# Specifies that pppd should use a UUCP-style lock on the serial device |
165 |
|
|
+# to ensure exclusive access to the device. |
166 |
|
|
+lock |
167 |
|
|
+ |
168 |
|
|
+# Use the modem control lines. |
169 |
|
|
+modem |
170 |
|
|
+ |
171 |
|
|
+# async character map -- 32-bit hex; each bit is a character |
172 |
|
|
+# that needs to be escaped for pppd to receive it. 0x00000001 |
173 |
|
|
+# represents '\x01', and 0x80000000 represents '\x1f'. |
174 |
|
|
+# To allow pppd to work over a rlogin/telnet connection, ou should escape |
175 |
|
|
+# XON (^Q), XOFF (^S) and ^]: (The peer should use "escape ff".) |
176 |
|
|
+#asyncmap 200a0000 |
177 |
|
|
+asyncmap 0 |
178 |
|
|
+ |
179 |
|
|
+# Specifies that certain characters should be escaped on transmission |
180 |
|
|
+# (regardless of whether the peer requests them to be escaped with its |
181 |
|
|
+# async control character map). The characters to be escaped are |
182 |
|
|
+# specified as a list of hex numbers separated by commas. Note that |
183 |
|
|
+# almost any character can be specified for the escape option, unlike |
184 |
|
|
+# the asyncmap option which only allows control characters to be |
185 |
|
|
+# specified. The characters which may not be escaped are those with hex |
186 |
|
|
+# values 0x20 - 0x3f or 0x5e. |
187 |
|
|
+#escape 11,13,ff |
188 |
|
|
+ |
189 |
|
|
+# Set the MRU [Maximum Receive Unit] value to <n> for negotiation. pppd |
190 |
|
|
+# will ask the peer to send packets of no more than <n> bytes. The |
191 |
|
|
+# minimum MRU value is 128. The default MRU value is 1500. A value of |
192 |
|
|
+# 296 is recommended for slow links (40 bytes for TCP/IP header + 256 |
193 |
|
|
+# bytes of data). |
194 |
|
|
+#mru 542 |
195 |
|
|
+ |
196 |
|
|
+# Set the MTU [Maximum Transmit Unit] value to <n>. Unless the peer |
197 |
|
|
+# requests a smaller value via MRU negotiation, pppd will request that |
198 |
|
|
+# the kernel networking code send data packets of no more than n bytes |
199 |
|
|
+# through the PPP network interface. |
200 |
|
|
+#mtu <n> |
201 |
|
|
+ |
202 |
|
|
+# Set the interface netmask to <n>, a 32 bit netmask in "decimal dot" |
203 |
|
|
+# notation (e.g. 255.255.255.0). |
204 |
|
|
+#netmask 255.255.255.0 |
205 |
|
|
+ |
206 |
|
|
+# Don't fork to become a background process (otherwise pppd will do so |
207 |
|
|
+# if a serial device is specified). |
208 |
|
|
+nodetach |
209 |
|
|
+ |
210 |
|
|
+# Set the assumed name of the remote system for authentication purposes |
211 |
|
|
+# to <n>. |
212 |
|
|
+#remotename <n> |
213 |
|
|
+ |
214 |
|
|
+# Add an entry to this system's ARP [Address Resolution Protocol] |
215 |
|
|
+# table with the IP address of the peer and the Ethernet address of this |
216 |
|
|
+# system. {proxyarp,noproxyarp} |
217 |
|
|
+proxyarp |
218 |
|
|
+ |
219 |
|
|
+# Use the system password database for authenticating the peer using |
220 |
|
|
+# PAP. Note: mgetty already provides this option. If this is specified |
221 |
|
|
+# then dialin from users using a script under Linux to fire up ppp wont work. |
222 |
|
|
+#login |
223 |
|
|
+ |
224 |
|
|
+# If this option is given, pppd will send an LCP echo-request frame to |
225 |
|
|
+# the peer every n seconds. Under Linux, the echo-request is sent when |
226 |
|
|
+# no packets have been received from the peer for n seconds. Normally |
227 |
|
|
+# the peer should respond to the echo-request by sending an echo-reply. |
228 |
|
|
+# This option can be used with the lcp-echo-failure option to detect |
229 |
|
|
+# that the peer is no longer connected. |
230 |
|
|
+lcp-echo-interval 30 |
231 |
|
|
+ |
232 |
|
|
+# If this option is given, pppd will presume the peer to be dead if n |
233 |
|
|
+# LCP echo-requests are sent without receiving a valid LCP echo-reply. |
234 |
|
|
+# If this happens, pppd will terminate the connection. Use of this |
235 |
|
|
+# option requires a non-zero value for the lcp-echo-interval parameter. |
236 |
|
|
+# This option can be used to enable pppd to terminate after the physical |
237 |
|
|
+# connection has been broken (e.g., the modem has hung up) in |
238 |
|
|
+# situations where no hardware modem control lines are available. |
239 |
|
|
+lcp-echo-failure 4 |
240 |
|
|
+ |
241 |
|
|
+# Specifies that pppd should disconnect if the link is idle for n seconds. |
242 |
|
|
+idle 600 |
243 |
|
|
+ |
244 |
|
|
+# Disable the IPXCP and IPX protocols. |
245 |
|
|
+noipx |
246 |
|
|
+ |
247 |
|
|
+# ---<End of File>--- |
248 |
|
|
--- ppp-2.3.3/sample/options.ttyXX.sample Tue Jan 6 17:53:27 1998 |
249 |
|
|
+++ ppp-2.3.3/sample/options.ttyXX Tue Jan 6 17:53:27 1998 |
250 |
|
|
@@ -0,0 +1,14 @@ |
251 |
|
|
+# If you need to set up multiple serial lines then copy this file to |
252 |
|
|
+# options.<ttyname> for each tty with a modem on it. |
253 |
|
|
+# |
254 |
|
|
+# The options.tty file will assign an IP address to each PPP connection |
255 |
|
|
+# as it comes up. They must all be distinct! |
256 |
|
|
+# |
257 |
|
|
+# Example: |
258 |
|
|
+# options.ttyS1 for com2 under DOS. |
259 |
|
|
+# |
260 |
|
|
+# Edit the following line so that the first IP address |
261 |
|
|
+# mentioned is the ip address of the serial port while the second |
262 |
|
|
+# is the IP address of your host |
263 |
|
|
+# |
264 |
|
|
+hostname-s1:hostname |
265 |
|
|
--- ppp-2.3.3/sample/pap-secrets.sample Tue Jan 6 17:53:27 1998 |
266 |
|
|
+++ ppp-2.3.3/sample/pap-secrets Tue Jan 6 17:53:27 1998 |
267 |
|
|
@@ -0,0 +1,28 @@ |
268 |
|
|
+# Secrets for authentication using PAP |
269 |
|
|
+# client server secret IP addresses |
270 |
|
|
+ |
271 |
|
|
+# OUTBOUND CONNECTIONS |
272 |
|
|
+# Here you should add your userid password to connect to your providers via |
273 |
|
|
+# pap. The * means that the password is to be used for ANY host you connect |
274 |
|
|
+# to. Thus you do not have to worry about the foreign machine name. Just |
275 |
|
|
+# replace password with your password. |
276 |
|
|
+# If you have different providers with different passwords then you better |
277 |
|
|
+# remove the following line. |
278 |
|
|
+#hostname * password |
279 |
|
|
+ |
280 |
|
|
+# INBOUND CONNECTIONS |
281 |
|
|
+#client hostname <password> 192.168.1.1 |
282 |
|
|
+ |
283 |
|
|
+# If you add "auth login -chap +pap" to /etc/mgetty+sendfax/login.config, |
284 |
|
|
+# all users in /etc/passwd can use their password for pap-authentication. |
285 |
|
|
+# |
286 |
|
|
+# Every regular user can use PPP and has to use passwords from /etc/passwd |
287 |
|
|
+#* hostname "" |
288 |
|
|
+# UserIDs that cannot use PPP at all. Check your /etc/passwd and add any |
289 |
|
|
+# other accounts that should not be able to use pppd! Replace hostname |
290 |
|
|
+# with your local hostname. |
291 |
|
|
+#guest hostname "*" - |
292 |
|
|
+#master hostname "*" - |
293 |
|
|
+#root hostname "*" - |
294 |
|
|
+#support hostname "*" - |
295 |
|
|
+#stats hostname "*" - |