pptpd/sme9/pptpd.conf

################################################################################
#
# Sample PoPToP configuration file
#
# for PoPToP version 1.0.1
#
################################################################################

# TAG: speed
#
#       Specifies the speed for the PPP daemon to talk at.
#       Some PPP daemons will ignore this value.
#
speed 115200

# TAG: option
#
#       Specifies the location of the PPP options file.
#       By default PPP looks in '/etc/ppp/options'
#
option /etc/ppp/options.pptpd

# TAG: debug
#
#       Turns on (more) debugging to syslog.
#
#debug

# TAG: localip
# TAG: remoteip
#
#       Specifies the local and remote IP address ranges.
#
#       You can specify single IP addresses seperated by commas or you can
#       specify ranges, or both. For example:
#
#               192.168.0.234,192.168.0.245-249,192.168.0.254
#
#       IMPORTANT RESTRICTIONS:
#
#       1. No spaces are permitted between commas or within addresses.
#
#       2. If you give more IP addresses than MAX_CONNECTIONS, it will
#          start at the beginning of the list and go until it gets 
#          MAX_CONNECTIONS IPs. Others will be ignored.
#
#       3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238,
#          you must type 234-238 if you mean this.
#
#       4. If you give a single localIP, that's ok - all local IPs will
#          be set to the given one. You MUST still give at least one remote
#          IP for each simultaneous client.
#
localip 192.168.1.80-89
remoteip 192.168.1.90-99

# TAG: ipxnets
#
#       This gives the range of IPX networks to allocate to clients.  By
#       default IPX network number allocation is not handled internally.
#       By putting a low and high network number here a pool of IPX networks
#       can be defined.  If this is done then there must be one IPX network
#       per client.
#
#       The format is a pair of hex numbers without any 0x prefix separated
#       by a hyphen.
#
#ipxnets 00001000-00001FFF

# TAG: listen
#
#       Defines the IP address of the local interface on which pptpd
#       should listen for connections.  The default is to listen on all
#       local interfaces (even ones brought up by pptp connections, thus
#       permitting pptp tunnels inside the pptp tunnels).
#
#listen 192.168.0.1

# TAG: pidfile
#
#       This defines the file name in which pptpd should store its process
#       ID (or pid).  The default is /var/run/pptpd.pid.
#
#pidfile /var/run/pptpd.pid
1	slords	1.1	################################################################################
2			#
3			# Sample PoPToP configuration file
4			#
5			# for PoPToP version 1.0.1
6			#
7			################################################################################
8
9			# TAG: speed
10			#
11			# Specifies the speed for the PPP daemon to talk at.
12			# Some PPP daemons will ignore this value.
13			#
14			speed 115200
15
16			# TAG: option
17			#
18			# Specifies the location of the PPP options file.
19			# By default PPP looks in '/etc/ppp/options'
20			#
21			option /etc/ppp/options.pptpd
22
23			# TAG: debug
24			#
25			# Turns on (more) debugging to syslog.
26			#
27			#debug
28
29			# TAG: localip
30			# TAG: remoteip
31			#
32			# Specifies the local and remote IP address ranges.
33			#
34			# You can specify single IP addresses seperated by commas or you can
35			# specify ranges, or both. For example:
36			#
37			# 192.168.0.234,192.168.0.245-249,192.168.0.254
38			#
39			# IMPORTANT RESTRICTIONS:
40			#
41			# 1. No spaces are permitted between commas or within addresses.
42			#
43			# 2. If you give more IP addresses than MAX_CONNECTIONS, it will
44			# start at the beginning of the list and go until it gets
45			# MAX_CONNECTIONS IPs. Others will be ignored.
46			#
47			# 3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238,
48			# you must type 234-238 if you mean this.
49			#
50			# 4. If you give a single localIP, that's ok - all local IPs will
51			# be set to the given one. You MUST still give at least one remote
52			# IP for each simultaneous client.
53			#
54			localip 192.168.1.80-89
55			remoteip 192.168.1.90-99
56
57			# TAG: ipxnets
58			#
59			# This gives the range of IPX networks to allocate to clients. By
60			# default IPX network number allocation is not handled internally.
61			# By putting a low and high network number here a pool of IPX networks
62			# can be defined. If this is done then there must be one IPX network
63			# per client.
64			#
65			# The format is a pair of hex numbers without any 0x prefix separated
66			# by a hyphen.
67			#
68			#ipxnets 00001000-00001FFF
69
70			# TAG: listen
71			#
72			# Defines the IP address of the local interface on which pptpd
73			# should listen for connections. The default is to listen on all
74			# local interfaces (even ones brought up by pptp connections, thus
75			# permitting pptp tunnels inside the pptp tunnels).
76			#
77			#listen 192.168.0.1
78
79			# TAG: pidfile
80			#
81			# This defines the file name in which pptpd should store its process
82			# ID (or pid). The default is /var/run/pptpd.pid.
83			#
84			#pidfile /var/run/pptpd.pid